backport: pa.md (UNSPEC_MEMORY_BARRIER): New unspec enum.
Backport from mainline
2018-08-11 John David Anglin <danglin@gcc.gnu.org>
gcc
* config/pa/pa.md (UNSPEC_MEMORY_BARRIER): New unspec enum.
Update comment for atomic instructions.
(atomic_storeqi, atomic_storehi, atomic_storesi, atomic_storesf,
atomic_loaddf, atomic_loaddf_1, atomic_storedf, atomic_storedf_1):
Remove.
(atomic_loaddi): Revise fence expansion to only emit fence prior to
load for __ATOMIC_SEQ_CST model.
(atomic_loaddi_1): Remove float register target.
(atomic_storedi): Handle CONST_INT values.
(atomic_storedi_1): Remove float register source. Add special case
for zero value.
(memory_barrier): New expander and insn.
libgcc
* config/pa/linux-atomic.c: Update comment.
(FETCH_AND_OP_2, OP_AND_FETCH_2, FETCH_AND_OP_WORD, OP_AND_FETCH_WORD,
COMPARE_AND_SWAP_2, __sync_val_compare_and_swap_4,
SYNC_LOCK_TEST_AND_SET_2, __sync_lock_test_and_set_4): Use
__ATOMIC_RELAXED for atomic loads.
(SYNC_LOCK_RELEASE_1): New define. Use __sync_synchronize() and
unordered store to release lock.
(__sync_lock_release_8): Likewise.
(SYNC_LOCK_RELEASE_2): Remove define.
Jonathan Wakely [Mon, 13 Aug 2018 19:16:02 +0000 (20:16 +0100)]
Revert "libstdc++-v3: Have aligned_alloc() on Newlib"
This reverts commit r263463 / b7edd52337828cc46e469bca12f58288795b78d5
because aligned_alloc is not defined for baremetal newlib targets, see
https://gcc.gnu.org/ml/libstdc++/2018-08/msg00065.html
Revert
2018-08-10 Sebastian Huber <sebastian.huber@embedded-brains.de>
PR target/85904
* configure.ac: Define HAVE_ALIGNED_ALLOC if building for
Newlib.
* configure: Regenerate.
backport: re PR target/86197 (POWERPC: float128 parameter passing)
Backport from mainline
2018-06-19 Segher Boessenkool <segher@kernel.crashing.org>
PR target/86197
* config/rs6000/rs6000.md (rs6000_discover_homogeneous_aggregate): An
ieee128 argument takes up only one (vector) register, not two (floating
point) registers.
Jonathan Wakely [Wed, 8 Aug 2018 15:53:25 +0000 (16:53 +0100)]
Prevent internal aligned_alloc clashing with libc version
If configure fails to detect aligned_alloc we will try to define our
own in new_opa.cc but that could clash with the libc version in
<stdlib.h>. Use a namespace to keep them distinct.
* libsupc++/new_opa.cc (aligned_alloc): Declare inside namespace to
avoid clashing with an ::aligned_alloc function that was not detected
by configure.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:55 +0000 (23:50 +0100)]
Declare some explicit instantiations for strings in Debug Mode
The empty reps and the I/O functions do not need to be implicitly
instantiated to enable assertions, so declare the explicit
instantiations when _GLIBCXX_EXTERN_TEMPLATE == -1 (i.e. when
_GLIBCXX_ASSERTIONS is defined).
Backport from mainline
2018-06-27 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/86138
* include/bits/basic_string.tcc: [_GLIBCXX_EXTERN_TEMPLATE < 0]
Declare explicit instantiations of COW empty reps and I/O functions.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:49 +0000 (23:50 +0100)]
PR libstdc++/84654 Disable __float128 specializations for -mno-float128
Backport from mainline
2018-05-08 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/85672
* include/Makefile.am [!ENABLE_FLOAT128]: Change c++config.h entry
to #undef _GLIBCXX_USE_FLOAT128 instead of defining it to zero.
* include/Makefile.in: Regenerate.
* include/bits/c++config (_GLIBCXX_USE_FLOAT128): Move definition
within conditional block.
Backport from mainline
2018-05-01 Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
PR libstdc++/84654
* acinclude.m4: Set ENABLE_FLOAT128 instead of _GLIBCXX_USE_FLOAT128.
* config.h.in: Remove references to _GLIBCXX_USE_FLOAT128.
* configure: Regenerate.
* include/Makefile.am: Replace the value of _GLIBCXX_USE_FLOAT128
based on ENABLE_FLOAT128.
* include/Makefile.in: Regenerate.
* include/bits/c++config: Define _GLIBCXX_USE_FLOAT128.
[!defined(__FLOAT128__) && !defined(__SIZEOF_FLOAT128__)]: Undefine
_GLIBCXX_USE_FLOAT128.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:28 +0000 (23:50 +0100)]
Improve libstdc++ docs w.r.t newer C++ standards
Instead of repeating all the old headers for every new standard I've
changed the docs to only list the new headers for each standard.
Backport from mainline
2018-07-31 Jonathan Wakely <jwakely@redhat.com>
* doc/xml/manual/test.xml: Improve documentation on writing tests for
newer standards.
* doc/xml/manual/using.xml: Document all headers for C++11 and later.
* doc/html/*: Regenerate.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:24 +0000 (23:50 +0100)]
PR libstdc++/60555 std::system_category() should recognise POSIX errno values
Backport from mainline
2018-08-03 Jonathan Wakely <jwakely@redhat.com>
* src/c++11/system_error.cc
(system_error_category::default_error_condition): Add workaround for
ENOTEMPTY and EEXIST having the same value on AIX.
* testsuite/19_diagnostics/error_category/system_category.cc: Add
extra testcases for EDOM, EILSEQ, ERANGE, EEXIST and ENOTEMPTY.
Backport from mainline
2018-08-01 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/60555
* src/c++11/system_error.cc
(system_error_category::default_error_condition): New override to
check for POSIX errno values.
* testsuite/19_diagnostics/error_category/generic_category.cc: New
* testsuite/19_diagnostics/error_category/system_category.cc: New
test.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:19 +0000 (23:50 +0100)]
PR libstdc++/86861 Meet precondition for Solaris memalign
Solaris memalign requires alignment to be at least sizeof(int), so
increase it as needed.
Also move the check for valid alignments from the fallback
implementation of aligned_alloc into operator new, as it's required for
all of aligned_alloc, memalign, posix_memalign and __aligned_malloc.
Backport from mainline
2018-08-07 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/86861
* libsupc++/new_opa.cc [_GLIBCXX_HAVE_MEMALIGN] (aligned_alloc):
Replace macro with inline function.
[__sun]: Increase alignment to meet memalign precondition.
[!HAVE__ALIGNED_MALLOC && !HAVE_POSIX_MEMALIGN && !HAVE_MEMALIGN]
(aligned_alloc): Move check for valid alignment to operator new.
Remove redundant check for non-zero size, it's enforced by the caller.
(operator new): Move check for valid alignment here. Use
__builtin_expect on check for zero size.
Jonathan Wakely [Tue, 7 Aug 2018 22:50:06 +0000 (23:50 +0100)]
Fix std::codecvt_utf8<wchar_t> for Mingw
Backport from mainline
2018-05-19 Jonathan Wakely <jwakely@redhat.com>
* src/c++11/codecvt.cc (__codecvt_utf8_base<wchar_t>::do_in)
[__SIZEOF_WCHAR_T__==2 && __BYTE_ORDER__!=__ORDER_BIG_ENDIAN__]: Set
little_endian element in bitmask.
* testsuite/22_locale/codecvt/codecvt_utf8/69703.cc: Run all tests.
* testsuite/22_locale/codecvt/codecvt_utf8/wchar_t/1.cc: New.
backport: re PR middle-end/86705 (pr45678-2.c ICE with msp430-elf -mlarge)
2018-08-02 Jozef Lawrynowicz <jozef.l@mittosystems.com>
Backport from mainline
2018-07-31 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR middle-end/86705
* gcc/cfgexpand.c (set_parm_rtl): Use the alignment of Pmode when
MAX_SUPPORTED_STACK_ALIGNMENT would otherwise be exceeded by the
requested variable alignment.
(expand_one_ssa_partition): Likewise.
(expand_one_var): Likewise.
Backport from mainline
PR target/84168
2017-09-28 Joseph Myers <joseph@codesourcery.com>
* config/aarch64/aarch64.c (aarch64_elf_asm_constructor)
(aarch64_elf_asm_destructor): Pass SECTION_NOTYPE to get_section
when creating .init_array and .fini_array sections with priority
specified.
Eric Botcazou [Tue, 17 Jul 2018 10:12:02 +0000 (10:12 +0000)]
decl.c (choices_to_gnu): Rename parameters.
* gcc-interface/decl.c (choices_to_gnu): Rename parameters. Deal with
an operand of Character type. Factor out range generation to the end.
Check that the bounds are literals and convert them to the type of the
operand before building the ranges.
* gcc-interface/utils.c (make_dummy_type): Minor tweak.
(make_packable_type): Propagate TYPE_DEBUG_TYPE.
(maybe_pad_type): Likewise.
Fritz Reese [Mon, 16 Jul 2018 23:35:39 +0000 (23:35 +0000)]
re PR fortran/83184 (Out of memory or ICE with option -fdec)
2018-07-16 Fritz Reese <fritzoreese@gmail.com>
gcc/testsuite/ChangeLog:
PR fortran/83184
Backport from trunk.
* gfortran.dg/assumed_rank_14.f90: New testcase.
* gfortran.dg/assumed_rank_15.f90: New testcase.
* gfortran.dg/dec_structure_8.f90: Update error messages.
* gfortran.dg/dec_structure_23.f90: Update error messages.
gcc/fortran/ChangeLog:
PR fortran/83184
Backport from trunk.
* decl.c (match_old_style_init): Initialize locus of variable expr when
creating a data variable.
(match_clist_expr): Verify array is explicit shape/size before
attempting to allocate constant array constructor.
Fritz Reese [Mon, 16 Jul 2018 22:25:54 +0000 (22:25 +0000)]
backport: re PR fortran/83183 (Out of memory with option -finit-derived)
2018-07-16 Fritz Reese <fritzoreese@gmail.com>
gcc/testsuite/ChangeLog:
Backport from trunk:
PR fortran/83183
PR fortran/86325
* gfortran.dg/init_flag_18.f90: New testcase.
* gfortran.dg/init_flag_19.f03: New testcase.
gcc/fortran/ChangeLog:
Backport from trunk:
PR fortran/86417
* module.c (mio_component): Set component->loc when loading from module.
PR fortran/83183
PR fortran/86325
* expr.c (class_allocatable, class_pointer, comp_allocatable,
comp_pointer): New helpers.
(component_initializer): Generate EXPR_NULL for allocatable or pointer
components. Do not generate initializers for components within BT_CLASS.
Do not assign to comp->initializer.
(gfc_generate_initializer): Use new helpers; move code to generate
EXPR_NULL for class allocatable components into component_initializer().
Jonathan Wakely [Wed, 4 Jul 2018 13:59:57 +0000 (14:59 +0100)]
Use non-throwing is_directory in filesystem::create_directory
The create_dir helper was calling the throwing form of
filesystem::is_directory instead of passing the error_code argument.
Since std::filesystem::create_directory(const path&, error_code&) is
noexcept, it would call std::terminate if an error occurred in
is_directory.
Passing the error_code also takes care of clearing it in the case where
is_directory returns true.
Backport from mainline
2018-03-09 Jonathan Wakely <jwakely@redhat.com>
src/filesystem/ops.cc (create_dir): Pass error_code to is_directory.
There is no need to use an allocator of the correct value_type when
calling allocator_traits::construct and allocator_traits::destroy. The
existing node allocator can be used, instead of constructing a new
allocator object every time.
There's also no benefit to using __gnu_cxx::__alloc_traits instead of
std::allocator_traits to get the pointer and const_pointer types.
std::forward_list is only available for C++11 and later, when
std::allocator_traits is available too.
Backport from mainline
2018-06-13 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/86127
* include/bits/forward_list.h (_Fwd_list_base::_Tp_alloc_type): Remove
unused typedef.
(_Fwd_list_base::_M_create_node, _Fwd_list_base::_M_erase_after):
Use node allocator to create and destroy elements.
(forward_list::_Tp_alloc_type): Remove unused typedef.
(forward_list::_Alloc_traits): Use allocator_traits instead of
__gnu_cxx::__alloc_traits.
* include/bits/forward_list.tcc (_Fwd_list_base::_M_erase_after):
Use node allocator to create and destroy elements.
Jonathan Wakely [Wed, 4 Jul 2018 13:59:13 +0000 (14:59 +0100)]
PR libstdc++/85098 add missing definitions for static constants
In C++11 and C++14 any odr-use of these constants requires a definition
at namespace-scope. In C++17 they are implicitly inline and so the
namespace-scope redeclarations are redundant (and allowing them is
deprecated).
Backport from mainline
2018-05-18 Jonathan Wakely <jwakely@redhat.com>
Jonathan Wakely [Wed, 4 Jul 2018 13:59:01 +0000 (14:59 +0100)]
PR libstdc++/83982 fix exception-safety guarantee of std::vector::resize
Construct new elements before moving existing ones, so that if a default
constructor throws, the existing elements are not left in a moved-from
state.
Backport from mainline
2018-06-14 Daniel Trebbien <dtrebbien@gmail.com>
Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/83982
* include/bits/vector.tcc (vector::_M_default_append(size_type)):
Default-construct new elements before moving existing ones.
* testsuite/23_containers/vector/capacity/resize/strong_guarantee.cc:
New.
re PR go/86331 (the gccgo's "go" tool looks like failing to invoke any sub go command)
PR go/86331
os: check return value as well as error from waitid
https://gcc.gnu.org/PR86331 indicates that if a signal handler runs it
is possible for syscall.Syscall6 to return a non-zero errno value even
if no error occurs. That is a problem in general, but this fix will
let us work around the general problem for the specific case of
calling waitid.
projects / thirdparty / gcc.git / log
