Hauke Mehrtens [Tue, 14 Mar 2017 17:55:02 +0000 (18:55 +0100)]
scripts: only generate config from feature flag if fully match
Without this change the code checked if the string was contained in the
feature option and not if the string matches the complete word. This only
removes the nand option from the omap24xx target, the other changes are
only removing options which were added twice.
* extend the new cpufreq_dt_platform_data definition in cpufreq-dt.h
* revert the removal of its usage in cpufreq-dt.c
* use new cpufreq-dt.h in qcom-cpufreq.c
Pavel Kubelun [Sun, 19 Mar 2017 11:59:26 +0000 (07:59 -0400)]
ipq806x: route gpio interrupts to APPS processor through scm firmware
For IPQ806x targets, TZ protects the registers that are used to
configure the routing of interrupts to a target processor.
To resolve this, this patch uses scm call to route GPIO interrupts
to application processor. Also the scm call interface is changed.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Pavel Kubelun [Sun, 19 Mar 2017 01:24:45 +0000 (04:24 +0300)]
ipq806x: remove scm firmware clocks
At the moment as a workaround definition for scm firmware in DT is used as if it is
apq8064 board. This leads to incomplete scm firmware initialization and as a result
cpuidle driver fails to configure.
By design unlike other qcom boards ipq do not use clocks to connect to scm.
Considering this we're removing from DT and scm driver clocks for ipq boards.
As a result cpuidle does not produce errors about failed configuration anymore.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Felix Fietkau [Fri, 17 Mar 2017 12:56:05 +0000 (13:56 +0100)]
mt76: update to the latest version, fixes Mesh/IBSS crypto support
9f02db7 mt76x2: fall back to software crypto for IBSS/Mesh per-sta GTK 4a54ab3 mt7603: fall back to software crypto for IBSS/Mesh per-sta GTK 712b8e8 mac80211: claim RSN IBSS support
Installation through bootloader webserver:
- With the power unplugged press and hold reset button.
- Plug power and hold reset button until LED starts to blink.
- Install sysupgrade image using web interface on 192.168.1.1.
Stefan Koch [Mon, 13 Mar 2017 22:42:10 +0000 (23:42 +0100)]
lantiq: vr9 fxs support: fixed check of SMP state within vpe-mt.c
SMP state is generally affected by
- CONFIG_SMP build-time kernel configuration option and
- 'nosmp' runtime kernel commandline option
The SMP state within vpe-mt.c is determined by CONFIG_SMP option.
A runtime check is needed if VPE functionality
should be used with a kernel image that supports SMP.
This fix introduces a check for 'nosmp' command line option
if CONFIG_SMP kernel configuration option is enabled.
Note: This patch is needed to use lantiq FXS if CONFIG_MIPS_MT_SMP
(that activates CONFIG_SMP) is enabled within kernel configuration
and the 'nosmp' command line argument is given to disable SMP at runtime.
Without this patch CONFIG_MIPS_MT_SMP must be disabled before using FXS.
With this patch setting the 'nosmp' parameter is enough.
In general, concurrent usage of FXS and SMP
is incompatible and will cause kernel panics.
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
Felix Fietkau [Thu, 16 Mar 2017 08:33:18 +0000 (09:33 +0100)]
kernel: speed up build system by getting rid of redundant work
KERNELRELEASE contains a $(shell) call which is evaluated over and over
again.
The call to checksyscalls.sh is unnecessary for LEDE and also takes a
few seconds to complete.
Jing Qiu [Tue, 14 Mar 2017 07:32:08 +0000 (15:32 +0800)]
kernel: Fix the incorrect i_nlink count after jffs2's RENAME_EXCHANGE operations.
The problem is caused by the incorrect handling of the parent inode's
i_nlink count for the dentry to be RENAME_EXCHANGED. There are 3 cases
to consider. Assume we want to RENAME_EXCHANGE struct dentry *a and
struct dentry *b, and inode_a is pointed to by dentry_a, inode_b is
pointed to by dentry_b:
1. If inode_a is a directory, but inode_b isn't, then we must decrease
the i_nlink count of old_dir_i, and increase the i_nlink of new_dir_i.
2. If inode_a isn't a directory, but inode_b is a directory, then we
must increase the i_nlink of old_dir_i, and decrease the i_nlink count
of new_dir_i.
3. If the types of inode_a and inode_b are the same, we don't change the
i_nlink for either old_dir_i or new_dir_i.
Signed-off-by: Jing Qiu <aqiu0720@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alexey Brodkin [Mon, 13 Mar 2017 09:47:45 +0000 (12:47 +0300)]
libnl: Fix building with uClibc
uClibc doesn't implement strerror_l() and thus libnl starting from
3.2.29 couldn't be compiled with it any longer, see
https://github.com/thom311/libnl/commit/6c2d111177e91184073c44f83d4a6182aaba06d7
To work-around that problem we'll just do a check on strerror_l()
availability during configuration and if it's not there just fall back
to locale-less strerror().
Patch for libnl is alreadfy merged upstream, see
https://github.com/thom311/libnl/commit/e15966ac7f3b43df2acf869f98089762807d0568
and once the next libnl release happens this one must be removed from
Lede/OpenWrt.
Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Daniel Engberg <daniel.engberg.lists@pyret.net>
Piotr Dymacz [Mon, 6 Mar 2017 22:20:37 +0000 (23:20 +0100)]
sysntpd: restore support for peer-less (standalone) mode
ntpd from Busybox supports peer-less (standalone) mode when it's started
with option -l and without any peer provided with option -p. In this
mode ntpd uses local time as reference and acts as stratum 1 server.
This mode can be used in isolated networks, where Internet access and/or
other NTP server/s are not available, but the device has some other way
of getting correct time, like e.g. GPS (ugps supports setting local time
by default).
Felix Fietkau [Wed, 15 Mar 2017 19:56:06 +0000 (20:56 +0100)]
mt76: update to the latest version, improves mt7603 support
03e44dc mt76x2: remove unnecessary headroom check cc70498 mt76x2: clarify queue selection field b056a78 dma: fix endian issue in mt76_dma_get_buf f020a60 mt7603: support loading the entire EEPROM from OTP 29b08d3 mt7603: fix endian issue in mt7603_mcu_set_timing dce8aac mt7603: fix endian issue in mt7603_mac_fill_rx f22273b mt7603: init WTBL entry before setting capabilities da8e796 mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry e54add5 mt7603: move napi/tasklet enable/disable outside of the locked section 59ce2b4 mt7603: set tx vif own MAC index (needed for beacons) 93ce124 mt7603: enable beacons for other virtual interfaces c91e660 mt7603: set secondary beacon time offsets
Michael Marley [Sat, 11 Mar 2017 22:49:26 +0000 (17:49 -0500)]
kernel: Add intel_idle driver to x86_64 build
This driver supports CPU-specific idle features on recent Intel
processors. It does not conflict with the ACPI idle driver and
that driver will continue to be used for unsupported and non-Intel
processors.
Signed-off-by: Michael Marley <michael@michaelmarley.com>
Michael Marley [Sat, 11 Mar 2017 22:47:27 +0000 (17:47 -0500)]
kernel: Add coretemp driver to x86_64 build
The x86_64 build already has the k10temp driver for AMD processors
built in, so this patch adds the coretemp driver for the same
functionality on Intel processors.
Signed-off-by: Michael Marley <michael@michaelmarley.com>
Rafał Miłecki [Tue, 14 Mar 2017 10:59:53 +0000 (11:59 +0100)]
umdns: update to the version 2017-03-14
This includes 3 cleanups: fd5a160 Don't cache hosts as services 80dd246 Refresh DNS records A and AAAA directly 6515101 Access cached records (instead of services) to read list of hosts
Hauke Mehrtens [Mon, 13 Mar 2017 19:04:32 +0000 (20:04 +0100)]
mbedtls: update to version 2.4.2
This fixes the following security problems:
* CVE-2017-2784: Freeing of memory allocated on stack when validating a public key with a secp224k1 curve
* SLOTH vulnerability
* Denial of Service through Certificate Revocation List
Stefan Koch [Tue, 28 Feb 2017 18:09:00 +0000 (19:09 +0100)]
lantiq: vr9 fxs support: fixed check of SMP state within vpe-mt.c
SMP state is generally affected by
- CONFIG_SMP build-time kernel configuration option and
- 'nosmp' runtime kernel commandline option
The SMP state within vpe-mt.c is determined by CONFIG_SMP option.
A runtime check is needed if VPE functionality
should be used with a kernel image that supports SMP.
This fix introduces a check for 'nosmp' command line option
if CONFIG_SMP kernel configuration option is enabled.
Note: This patch is needed to use lantiq FXS if CONFIG_MIPS_MT_SMP
(that activates CONFIG_SMP) is enabled within kernel configuration
and the 'nosmp' command line argument is given to disable SMP at runtime.
Without this patch CONFIG_MIPS_MT_SMP must be disabled before using FXS.
With this patch setting the 'nosmp' parameter is enough.
In general, concurrent usage of FXS and SMP
is incompatible and will cause kernel panics.
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
Felix Fietkau [Mon, 13 Mar 2017 12:32:02 +0000 (13:32 +0100)]
ipq806x: clean up dts patching in 4.9
Do not patch upstream files, overwrite them entirely. The upstream files
are buggy for a number of devices and this significantly simplifies the
patch structure
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: John Crispin <john@phrozen.org>
The Netgear WNDR4300, equipped with an Atheros AR8327 Gigabit Switch,
has two LEDs on each port for monitoring LAN activity, but it currently
only uses one. Fix the configuration to use both.
The patch provides this new configuration:
- green LED: 1 Gbps link, 4Hz blink frequency
- amber LED: 10/100 Mbps link. 4Hz for 100Mbps, 2Hz for 10Mbps
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Piotr Dymacz [Sat, 11 Mar 2017 16:44:05 +0000 (17:44 +0100)]
ar71xx: base-files: shorten case statement patterns in lib/ar71xx.sh
At now there is no general rule about what part of (or whole) machine
name string should be used for board name assignment/detection and every
target handles this in a different way.
For most of the boards in ar71xx we already use only part of the string,
generally without the vendor name.
This shortens wildcards patterns in case statement for board name
assignment, wherever possible (e.g. where it won't be misleading).
Piotr Dymacz [Fri, 10 Mar 2017 22:12:25 +0000 (23:12 +0100)]
ar71xx: base-files: always use double quotes in lib/ar71xx.sh
Be consistent and always use double quotes for case statement patterns,
as in other targets. With this approach it should be less confusing for
users adding support for new devices.
Also, be consistent with MikroTik boards wildcard pattern.
Shuanglin Liu [Thu, 2 Mar 2017 17:23:50 +0000 (01:23 +0800)]
ar71xx: add support for Rockeetech AP531B0
Specification:
- SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB))
- RAM: 64 MiB DDR2
- Storage: 16 MiB of flash (optional 16 MiB second flash)
- Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0) 1x100M (port 4)
- PCI-E: x1
- SIMcard slot: x1
- USB 2.0 port: x1 (optional)
- Ext GPIO pin: x8
- UART for serial console: x1
- External watchdog: x1 (optional)
- Power supply: 9-48V (DC jack/passive PoE)
Installation through tftp:
- Copy <Firmware Image Name> into tftp directory
- Connect board via ttl port and Ethernet port
- Boot the AP531B0
- When "Autobooting in 1 seconds" appears press Enter
- Set serverip and ipaddr appropriate
(e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1)
- Enter "tftp 0x8050000 <Firmware Image Name>"
- Enter "erase 0x9f050000 +$filesize"
- Enter "cp.b 0x80500000 0x9f050000 $filesize"
- Enter "reset"
Signed-off-by: Shuanglin Liu <roboidler@gmail.com>
Alberto Bursi [Mon, 6 Mar 2017 18:37:47 +0000 (19:37 +0100)]
github: include pull request template
This text is used by GitHub to remind important things to
people sending PRs through the GitHub's web interface.
See here for more information
https://github.com/blog/2111-issue-and-pull-request-templates
It links to the wiki page about submission rules.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Hanqing Wong [Sat, 11 Mar 2017 07:44:33 +0000 (15:44 +0800)]
ramips: add support for Netgear R6220
This patch adds support for the Netgear R6220, aka Netgear AC1200 and
R6220-100NAS.
Specification:
- SoC: MediaTek MT7621ST (880 MHz)
- Falsh: 128 MiB (Macronix MX30LF1G08AA-TI)
- RAM: 128 MiB (Nanya NT5CB64M16FP-DH)
- Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac
- LAN speed: 10/100/1000
- LAN ports: 4
- WAN speed: 10/100/1000
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600
Installation through telnet:
- Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port
on the router. link: http://192.168.1.1/setup.cgi?todo=debug
(login if required, default: admin password)
- You will see "Debug Enabled!"
- Telnet 192.168.1.1 and login with "root"
- ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for
example.
- cd /mnt/shares/myUdisk
- mtd_write write rootfs.bin Rootfs
- mtd_write write kernel.bin Kernel
- reboot
nmrpflash can be used to recover to the netgear firmware if a broken
image was flashed.
projects / thirdparty / openwrt.git / log
