Over the years, syzbot found many ways to crash the kernel
in ip6gre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ip6gre device.
Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot+43a2ebcf2a64b1102d64@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/693b002c.a70a0220.33cd7b.0033.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251211173550.2032674-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The openvswitch teardown code will immediately call
ovs_netdev_detach_dev() in response to a NETDEV_UNREGISTER notification.
It will then start the dp_notify_work workqueue, which will later end up
calling the vport destroy() callback. This callback takes the RTNL to do
another ovs_netdev_detach_port(), which in this case is unnecessary.
This causes extra pressure on the RTNL, in some cases leading to
"unregister_netdevice: waiting for XX to become free" warnings on
teardown.
We can straight-forwardly avoid the extra RTNL lock acquisition by
checking the device flags before taking the lock, and skip the locking
altogether if the IFF_OVS_DATAPATH flag has already been unset.
The Aspeed MDIO controller may return incorrect data when a read operation
follows immediately after a write. Due to a controller bug, the subsequent
read can latch stale data, causing the polling logic to terminate earlier
than expected.
To work around this hardware issue, insert a dummy read after each write
operation. This ensures that the next actual read returns the correct
data and prevents premature polling exit.
This workaround has been verified to stabilize MDIO transactions on
affected Aspeed platforms.
This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in
btusb.c file").
In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This
ties the lifetime of all the btusb data to the binding of a driver to
one interface, INTF. In a driver that binds to other interfaces, ISOC
and DIAG, this is an accident waiting to happen.
The issue is revealed in btusb_disconnect(), where calling
usb_driver_release_interface(&btusb_driver, data->intf) will have devm
free the data that is also being used by the other interfaces of the
driver that may not be released yet.
To fix this, revert the use of devm and go back to freeing memory
explicitly.
Fixes: 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file") Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MGMT_SETTING_ISO_BROADCASTER and MGMT_SETTING_ISO_RECEIVER flags are
missing from supported_settings although they are in current_settings.
Report them also in supported_settings to be consistent.
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty.
During the IDPF init phase, the mailbox runs in poll mode until it is
configured to properly handle interrupts. The previous delay of 300ms is
excessively long for the mailbox polling mechanism, which causes a slow
initialization of ~2s:
IPU SDK versions 1.9 through 2.0.5 require send buffer to contain a single
empty memory region. Set number of regions to 1 and use appropriate send
buffer size to satisfy this requirement.
Fixes: 6aa53e861c1a ("idpf: implement get LAN MMIO memory regions") Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are off-by-one bugs when configuring RSS hash key and lookup
table, causing out-of-bounds reads to memory [1] and out-of-bounds
writes to device registers.
Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"),
the loop upper bounds were:
i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX
which is safe since the value is the last valid index.
That commit changed the bounds to:
i <= adapter->rss_{key,lut}_size / 4
where `rss_{key,lut}_size / 4` is the number of dwords, so the last
valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=`
accesses one element past the end.
Fix the issues by using `<` instead of `<=`, ensuring we do not exceed
the bounds.
[1] KASAN splat about rss_key_size off-by-one
BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800
Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63
The buggy address belongs to the object at ffff888102c50100
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes to the right of
allocated 52-byte region [ffff888102c50100, ffff888102c50134)
Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
>ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
The maximum number of descriptors supported by the hardware is
hardware-dependent and can be retrieved using
i40e_get_max_num_descriptors(). Move this function to a shared header
and use it when checking for valid ring_len parameter rather than using
hardcoded value.
By fixing an over-acceptance issue, behavior change could be seen where
ring_len could now be rejected while configuring rx and tx queues if its
size is larger than the hardware-dependent maximum number of
descriptors.
Fixes: 55d225670def ("i40e: add validation for ring_len param") Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add service task schedule to set_rx_mode.
In some cases there are error messages printed out in PTP application
(ptp4l):
ptp4l[13848.762]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.825]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.887]: port 1 (ens2f3np3): received SYNC without timestamp
This happens when service task would not run immediately after
set_rx_mode, and we need it for setup tasks. This service task checks, if
PTP RX packets are hung in firmware, and propagate correct settings such
as multicast address for IEEE 1588 Precision Time Protocol.
RX timestamping depends on some of these filters set. Bug happens only
with high PTP packets frequency incoming, and not every run since
sometimes service task is being ran from a different place immediately
after starting ptp4l.
Fixes: 0e4425ed641f ("i40e: fix: do not sleep in netdev_ops") Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel/sched/ext.c:5332 scx_alloc_and_add_sched() warn: passing zero to 'ERR_PTR'
In scx_alloc_and_add_sched(), the alloc_percpu() failure path jumps to
err_free_gdsqs without initializing @ret. That can lead to returning
ERR_PTR(0), which violates the ERR_PTR() convention and confuses
callers.
Set @ret to -ENOMEM before jumping to the error path when
alloc_percpu() fails.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202512141601.yAXDAeA9-lkp@intel.com/ Reported-by: Dan Carpenter <error27@gmail.com> Fixes: c201ea1578d3 ("sched_ext: Move event_stats_cpu into scx_sched") Signed-off-by: Liang Jie <liangjie@lixiang.com> Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> Reviewed-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When userspace brings down and deletes a non-transmitted profile,
it is expected to send a new updated Beacon template for the
transmitted profile of that multiple BSSID (MBSSID) group which
does not include the removed profile in MBSSID element. This
update comes via NL80211_CMD_SET_BEACON.
Such updates work well as long as the group continues to have at
least one non-transmitted profile as NL80211_ATTR_MBSSID_ELEMS
is included in the new Beacon template.
But when the last non-trasmitted profile is removed, it still
gets included in Beacon templates sent to driver. This happens
because when no MBSSID elements are sent by the userspace,
ieee80211_assign_beacon() ends up using the element stored from
earlier Beacon template.
Do not copy old MBSSID elements, instead userspace should always
include these when applicable.
Fixes: 2b3171c6fe0a ("mac80211: MBSSID beacon handling in AP mode") Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20251215174656.2866319-2-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]'
SI hardware doesn't support pasids, user mode queues, or
KIQ/MES so there is no need for this. Doing so results in
a segfault as these callbacks are non-existent for SI.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4744 Fixes: f3854e04b708 ("drm/amdgpu: attach tlb fence to the PTs update") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 820b3d376e8a102c6aeab737ec6edebbbb710e04) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a mechanism for DisplayID specific quirks, and add the first quirk
to ignore DisplayID section checksum errors.
It would be quite inconvenient to pass existing EDID quirks from
drm_edid.c for DisplayID parsing. Not all places doing DisplayID
iteration have the quirks readily available, and would have to pass it
in all places. Simply add a separate array of DisplayID specific EDID
quirks. We do end up checking it every time we iterate DisplayID blocks,
but hopefully the number of quirks remains small.
There are a few laptop models with DisplayID checksum failures, leading
to higher refresh rates only present in the DisplayID blocks being
ignored. Add a quirk for the panel in the machines.
uniform_split_supported() and non_uniform_split_supported() share
significantly similar logic.
The only functional difference is that uniform_split_supported() includes
an additional check on the requested @new_order.
The reason for this check comes from the following two aspects:
* some file system or swap cache just supports order-0 folio
* the behavioral difference between uniform/non-uniform split
The behavioral difference between uniform split and non-uniform:
* uniform split splits folio directly to @new_order
* non-uniform split creates after-split folios with orders from
folio_order(folio) - 1 to new_order.
This means for non-uniform split or !new_order split we should check the
file system and swap cache respectively.
This commit unifies the logic and merge the two functions into a single
combined helper, removing redundant code and simplifying the split
support checking mechanism.
Link: https://lkml.kernel.org/r/20251106034155.21398-3-richard.weiyang@gmail.com Fixes: c010d47f107f ("mm: thp: split huge page to any lower order pages") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Nico Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ split_type => uniform_split and replaced SPLIT_TYPE_NON_UNIFORM checks ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When loading the ebpf scheduler, the tasks in the scx_tasks list will
be traversed and invoke __setscheduler_class() to get new sched_class.
however, this would also incorrectly set the per-cpu migration
task's->sched_class to rt_sched_class, even after unload, the per-cpu
migration task's->sched_class remains sched_rt_class.
sched_ext: BPF scheduler "rustland" disabled (unregistered from user space)
EXIT: unregistered from user space
04:25:21 [INFO] Unregister RustLand scheduler
Basically, from the constraint that the sum of lag is zero, you can
infer that the 0-lag point is the weighted average of the individual
vruntime, which is what we're trying to compute:
\Sum w_i * v_i
avg = --------------
\Sum w_i
Now, since vruntime takes the whole u64 (worse, it wraps), this
multiplication term in the numerator is not something we can compute;
instead we do the min_vruntime (v0 henceforth) thing like:
v_i = (v_i - v0) + v0
This does two things:
- it keeps the key: (v_i - v0) 'small';
- it creates a relative 0-point in the modular space.
If you do that subtitution and work it all out, you end up with:
Since you cannot very well track a ratio like that (and not suffer
terrible numerical problems) we simpy track the numerator and
denominator individually and only perform the division when strictly
needed.
Notably, the numerator lives in cfs_rq->avg_vruntime and the denominator
lives in cfs_rq->avg_load.
The one extra 'funny' is that these numbers track the entities in the
tree, and current is typically outside of the tree, so avg_vruntime()
adds current when needed before doing the division.
(vruntime_eligible() elides the division by cross-wise multiplication)
Anyway, as mentioned above, we currently use the CFS era min_vruntime
for this purpose. However, this thing can only move forward, while the
above avg can in fact move backward (when a non-eligible task leaves,
the average becomes smaller), this can cause trouble when through
happenstance (or construction) these values drift far enough apart to
wreck the game.
Replace cfs_rq::min_vruntime with cfs_rq::zero_vruntime which is kept
near/at avg_vruntime, following its motion.
The down-side is that this requires computing the avg more often.
I always end up having to re-read these emails every time I look at
this code. And a future patch is going to change this story a little.
This means it is past time to stick them in a comment so it can be
modified and stay current.
All microcode patches up to the proper BIOS Entrysign fix are loaded
only after the sha256 signature carried in the driver has been verified.
Microcode patches after the Entrysign fix has been applied, do not need
that signature verification anymore.
In order to not abandon machines which haven't received the BIOS update
yet, add the capability to select which microcode patch to load.
The corresponding microcode container supplied through firmware-linux
has been modified to carry two patches per CPU type
(family/model/stepping) so that the proper one gets selected.
When executing a task in proxy context, handle yields as if they were
requested by the donor task. This matches the traditional PI semantics
of yield() as well.
This avoids scenario like proxy task yielding, pick next task selecting the
same previous blocked donor, running the proxy task again, etc.
Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202510211205.1e0f5223-lkp@intel.com Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fernand Sieber <sieberf@amazon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20251106104022.195157-1-sieberf@amazon.com Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).
Fixes: e26ee4efbc79 ("fuse: allocate ff->release_args only if release is needed") Cc: stable@vger.kernel.org Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reported-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a request is terminated before it has been committed, the request
is not removed from the queue's list. This leaves a dangling list entry
that leads to list corruption and use-after-free issues.
Remove the request from the queue's list for terminated non-committed
requests.
The driver is dropping the references taken to the larb devices during
probe after successful lookup as well as on errors. This can
potentially lead to a use-after-free in case a larb device has not yet
been bound to its driver so that the iommu driver probe defers.
Fix this by keeping the references as expected while the iommu driver is
bound.
Fixes: 26593928564c ("iommu/mediatek: Add error path for loop of mm_dts_parse") Cc: stable@vger.kernel.org Cc: Yong Wu <yong.wu@mediatek.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b444a ("block: Prevent potential deadlock in blk_revalidate_disk_zones()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some flexcom nodes related to uart, the fifo sizes were wrong: fix
them to 32 data. Note that product datasheet is being reviewed to fix
inconsistency, but this value is validated by product's designers.
The macros FAN_FROM_REG and TEMP_FROM_REG evaluate their arguments
multiple times. When used in lockless contexts involving shared driver
data, this causes Time-of-Check to Time-of-Use (TOCTOU) race
conditions.
Convert the macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
In max16065_current_show, data->curr_sense is read twice: once for the
error check and again for the calculation. Since
i2c_smbus_read_byte_data returns negative error codes on failure, if the
data changes to an error code between the check and the use, ADC_TO_CURR
results in an incorrect calculation.
Read data->curr_sense into a local variable to ensure consistency. Note
that data->curr_gain is constant and safe to access directly.
This aligns max16065_current_show with max16065_input_show, which
already uses a local variable for the same reason.
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org Fixes: 3642b4e5cbfe ("interconnect: qcom: Add SDX75 interconnect provider driver") Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75 Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In i2c_amd_probe(), amd_mp2_find_device() utilizes
driver_find_next_device() which internally calls driver_find_device()
to locate the matching device. driver_find_device() increments the
reference count of the found device by calling get_device(), but
amd_mp2_find_device() fails to call put_device() to decrement the
reference count before returning. This results in a reference count
leak of the PCI device each time i2c_amd_probe() is executed, which
may prevent the device from being properly released and cause a memory
leak.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20251022095402.8846-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the RISCV_ISA_V dependency of the RISC-V crypto code with
RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS, which implies RISCV_ISA_V as
well as vector unaligned accesses being efficient.
This is necessary because this code assumes that vector unaligned
accesses are supported and are efficient. (It does so to avoid having
to use lots of extra vsetvli instructions to switch the element width
back and forth between 8 and either 32 or 64.)
This was omitted from the code originally just because the RISC-V kernel
support for detecting this feature didn't exist yet. Support has now
been added, but it's fragmented into per-CPU runtime detection, a
command-line parameter, and a kconfig option. The kconfig option is the
only reasonable way to do it, though, so let's just rely on that.
Members of struct software_node_ref_args should not be dereferenced
directly but set using the provided macros. Commit d7cdbbc93c56
("software node: allow referencing firmware nodes") changed the name of
the software node member and caused a build failure. Remove all direct
dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by
waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear
in the system before setting up the reference for the I2C device, while
the actual software node already exists in the intel-xhci-usb-role-switch
module and should be used to set up a static reference. Add a FIXME for
a future improvement.
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes") Fixes: 53c24c2932e5 ("platform/x86: intel_cht_int33fe: use inline reference properties") Cc: stable@vger.kernel.org Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rzg2l_gpt_config() tests the rzg2l_gpt->period_tick variable when
both channels of a hardware channel are in use. This check is not valid
if rzg2l_gpt_config() is called after disabling all the channels, as it
tests against the cached value. Hence, allow checking and setting the
cached value only if the sibling channel is enabled.
While at it, drop else after return statement to fix the check patch
warning.
Cc: stable@kernel.org Fixes: 061f087f5d0b ("pwm: Add support for RZ/G2L GPT") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20251126104308.142302-1-biju.das.jz@bp.renesas.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While testing rpmsg-char interface it was noticed that duplicate sysfs
entries are getting created and below warning is noticed.
Reason for this is that we are leaking rpmsg device pointer, setting it
null without actually unregistering device.
Any further attempts to unregister fail because rpdev is NULL,
resulting in a leak.
Fix this by unregistering rpmsg device before removing its reference
from rpmsg channel.
sysfs: cannot create duplicate filename '/devices/platform/soc@0/3700000.remot
eproc/remoteproc/remoteproc1/3700000.remoteproc:glink-edge/3700000.remoteproc:
glink-edge.adsp_apps.-1.-1'
[ 114.115347] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not
tainted 6.16.0-rc4 #7 PREEMPT
[ 114.115355] Hardware name: Qualcomm Technologies, Inc. Robotics RB3gen2 (DT)
[ 114.115358] Workqueue: events qcom_glink_work
[ 114.115371] Call trace:8
[ 114.115374] show_stack+0x18/0x24 (C)
[ 114.115382] dump_stack_lvl+0x60/0x80
[ 114.115388] dump_stack+0x18/0x24
[ 114.115393] sysfs_warn_dup+0x64/0x80
[ 114.115402] sysfs_create_dir_ns+0xf4/0x120
[ 114.115409] kobject_add_internal+0x98/0x260
[ 114.115416] kobject_add+0x9c/0x108
[ 114.115421] device_add+0xc4/0x7a0
[ 114.115429] rpmsg_register_device+0x5c/0xb0
[ 114.115434] qcom_glink_work+0x4bc/0x820
[ 114.115438] process_one_work+0x148/0x284
[ 114.115446] worker_thread+0x2c4/0x3e0
[ 114.115452] kthread+0x12c/0x204
[ 114.115457] ret_from_fork+0x10/0x20
[ 114.115464] kobject: kobject_add_internal failed for 3700000.remoteproc:
glink-edge.adsp_apps.-1.-1 with -EEXIST, don't try to register things with
the same name in the same directory.
[ 114.250045] rpmsg 3700000.remoteproc:glink-edge.adsp_apps.-1.-1:
device_add failed: -17
rtla-timerlat allows a *thread* latency threshold to be set via the
-T/--thread option. However, the timerlat tracer calls this *total*
latency (stop_tracing_total_us), and stops tracing also when the
return-to-user latency is over the threshold.
Change the behavior of the timerlat BPF program to reflect what the
timerlat tracer is doing, to avoid discrepancy between stopping
collecting data in the BPF program and stopping tracing in the timerlat
tracer.
Cc: stable@vger.kernel.org Fixes: e34293ddcebd ("rtla/timerlat: Add BPF skeleton to collect samples") Reviewed-by: Wander Lairson Costa <wander@redhat.com> Link: https://lore.kernel.org/r/20251006143100.137255-1-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference taken to the canvas platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Also note that commit 28f851e6afa8 ("soc: amlogic: canvas: add missing
put_device() call in meson_canvas_get()") fixed the leak in a lookup
error path, but the reference is still leaking on success.
Make sure to drop the reference taken to the ocmem platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Also note that commit 0ff027027e05 ("soc: qcom: ocmem: Fix missing
put_device() call in of_get_ocmem") fixed the leak in a lookup error
path, but the reference is still leaking on success.
Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Cc: stable@vger.kernel.org # 5.5: 0ff027027e05 Cc: Brian Masney <bmasney@redhat.com> Cc: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20250926143511.6715-2-johan@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 4d38328eb442d ("tracing: Fix synth event printk format for str
fields") replaced "%.*s" with "%s" but missed removing the number size of
the dynamic and static strings. The commit e1a453a57bc7 ("tracing: Do not
add length to print format in synthetic events") fixed the dynamic part
but did not fix the static part. That is, with the commands:
For the cases where user includes a non-zero value in 'token_uuid_ptr'
field of 'struct vfio_device_bind_iommufd', the copy_struct_from_user()
in vfio_df_ioctl_bind_iommufd() fails with -E2BIG. For the 'minsz' passed,
copy_struct_from_user() expects the newly introduced field to be zero-ed,
which would be incorrect in this case.
Fix this by passing the actual size of the kernel struct. If working
with a newer userspace, copy_struct_from_user() would copy the
'token_uuid_ptr' field, and if working with an old userspace, it would
zero out this field, thus still retaining backward compatibility.
Fixes: 86624ba3b522 ("vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD") Cc: stable@vger.kernel.org Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20251031170603.2260022-2-rananta@google.com Signed-off-by: Alex Williamson <alex@shazbot.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
from if it is not NULL.
If we break the loop in with 'vf_pdev' not NULL. We
need to call pci_dev_put() to decrease the reference count.
Found via static anlaysis and this is similar to commit c508eb042d97
("perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()")
Fixes: 8b6c724cdab8 ("virtio: vdpa: vDPA driver for Marvell OCTEON DPU devices") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251027060737.33815-1-linmq006@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The write pointer of zones that are in the full condition is always
invalid. Reflect that fact by setting the write pointer of full zones
to ULLONG_MAX.
Fixes: eb0570c7df23 ("block: new zoned loop block device driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zloop_rw() will fail any regular write operation that targets a full
sequential zone. The check for this is indirect and achieved by checking
the write pointer alignment of the write operation. But this check is
ineffective for zone append operations since these are alwasy
automatically directed at a zone write pointer.
Prevent zone append operations from being executed in a full zone with
an explicit check of the zone condition.
Fixes: eb0570c7df23 ("block: new zoned loop block device driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9a7c987fb92b ("crypto: arm64/ghash - Use API partial block
handling") made ghash_finup() pass the wrong buffer to
ghash_do_simd_update(). As a result, ghash-neon now produces incorrect
outputs when the message length isn't divisible by 16 bytes. Fix this.
(I didn't notice this earlier because this code is reached only on CPUs
that support NEON but not PMULL. I haven't yet found a way to get
qemu-system-aarch64 to emulate that configuration.)
Fixes: 9a7c987fb92b ("crypto: arm64/ghash - Use API partial block handling") Cc: stable@vger.kernel.org Reported-by: Diederik de Haas <diederik@cknow-tech.com> Closes: https://lore.kernel.org/linux-crypto/DETXT7QI62KE.F3CGH2VWX1SC@cknow-tech.com/ Tested-by: Diederik de Haas <diederik@cknow-tech.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20251209223417.112294-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing the buffer to rng->read(). On allocation
failure, log the error and return since test_len() returns void.
Fixes: 2be0d806e25e ("crypto: caam - add a test for the RNG") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several crypto user API contexts and requests allocated with
sock_kmalloc() were left uninitialized, relying on callers to
set fields explicitly. This resulted in the use of uninitialized
data in certain error paths or when new fields are added in the
future.
The ACVP patches also contain two user-space interface files:
algif_kpp.c and algif_akcipher.c. These too rely on proper
initialization of their context structures.
A particular issue has been observed with the newly added
'inflight' variable introduced in af_alg_ctx by commit:
Because the context is not memset to zero after allocation,
the inflight variable has contained garbage values. As a result,
af_alg_alloc_areq() has incorrectly returned -EBUSY randomly when
the garbage value was interpreted as true:
The check directly tests ctx->inflight without explicitly
comparing against true/false. Since inflight is only ever set to
true or false later, an uninitialized value has triggered
-EBUSY failures. Zero-initializing memory allocated with
sock_kmalloc() ensures inflight and other fields start in a known
state, removing random issues caused by uninitialized data.
Commit b8d3404058a6 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Commit 88c9b3af4e31 ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Commit 2278b8b54773 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Commit 4891b66185c1 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Commit 51bc04d5b49d ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Commit c007a5505504 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move
SC8280XP to dedicated schema") move the device schema to separate file,
but it missed a "if:not:...then:" clause in the original binding which
was requiring power-domains and resets for this particular chip.
Commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
The manuals of 2K2000 says both BIT_CTRL_MODE and BYTE_CTRL_MODE are
supported but the latter is recommended. Also on 2K3000, per the ACPI
DSDT the GPIO controller is compatible with 2K2000, but it fails to
operate GPIOs 62 and 63 (and maybe others) using BIT_CTRL_MODE.
Using BYTE_CTRL_MODE also makes those 2K3000 GPIOs work.
Dell Precision 7780 often wakes up on its own from suspend. Sometimes
wake up happens immediately (i. e. within 7 seconds), sometimes it happens
after, say, 30 minutes.
With z16 a new flag 'search boot program' was introduced for
list-directed IPL (SCSI, NVMe, ECKD DASD). If this flag is set,
e.g. via selecting the "Automatic" value for the "Boot program
selector" control on an HMC load panel, it is copied to the reipl
structure from the initial ipl structure. When a user now sets a
boot prog via sysfs, the flag is not cleared and the bootloader
will again automatically select the boot program, ignoring user
configuration.
To avoid that, clear the SBP flag when a bootprog sysfs file is
written.
On x86-64, this_cpu_cmpxchg() uses CMPXCHG without LOCK prefix which
means it is only safe for the local CPU and not for multiple CPUs.
Recently the commit 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi
safe") make css_rstat_updated lockless and uses lockless list to allow
reentrancy. Since css_rstat_updated can invoked from process context,
IRQ and NMI, it uses this_cpu_cmpxchg() to select the winner which will
inset the lockless lnode into the global per-cpu lockless list.
However the commit missed one case where lockless node of a cgroup can
be accessed and modified by another CPU doing the flushing. Basically
llist_del_first_init() in css_process_update_tree().
On a cursory look, it can be questioned how css_process_update_tree()
can see a lockless node in global lockless list where the updater is at
this_cpu_cmpxchg() and before llist_add() call in css_rstat_updated().
This can indeed happen in the presence of IRQs/NMI.
Consider this scenario: Updater for cgroup stat C on CPU A in process
context is after llist_on_list() check and before this_cpu_cmpxchg() in
css_rstat_updated() where it get interrupted by IRQ/NMI. In the IRQ/NMI
context, a new updater calls css_rstat_updated() for same cgroup C and
successfully inserts rstatc_pcpu->lnode.
Now concurrently CPU B is running the flusher and it calls
llist_del_first_init() for CPU A and got rstatc_pcpu->lnode of cgroup C
which was added by the IRQ/NMI updater.
Now imagine CPU B calling init_llist_node() on cgroup C's
rstatc_pcpu->lnode of CPU A and on CPU A, the process context updater
calling this_cpu_cmpxchg(rstatc_pcpu->lnode) concurrently.
The CMPXCNG without LOCK on CPU A is not safe and thus we need LOCK
prefix.
In Meta's fleet running the kernel with the commit 36df6e3dbd7e, we are
observing on some machines the memcg stats are getting skewed by more
than the actual memory on the system. On close inspection, we noticed
that lockless node for a workload for specific CPU was in the bad state
and thus all the updates on that CPU for that cgroup was being lost.
To confirm if this skew was indeed due to this CMPXCHG without LOCK in
css_rstat_updated(), we created a repro (using AI) at [1] which shows
that CMPXCHG without LOCK creates almost the same lnode corruption as
seem in Meta's fleet and with LOCK CMPXCHG the issue does not
reproduces.
We can't log a conflicting inode if it's a directory and it was moved
from one parent directory to another parent directory in the current
transaction, as this can result an attempt to have a directory with
two hard links during log replay, one for the old parent directory and
another for the new parent directory.
The following scenario triggers that issue:
1) We have directories "dir1" and "dir2" created in a past transaction.
Directory "dir1" has inode A as its parent directory;
2) We move "dir1" to some other directory;
3) We create a file with the name "dir1" in directory inode A;
4) We fsync the new file. This results in logging the inode of the new file
and the inode for the directory "dir1" that was previously moved in the
current transaction. So the log tree has the INODE_REF item for the
new location of "dir1";
5) We move the new file to some other directory. This results in updating
the log tree to included the new INODE_REF for the new location of the
file and removes the INODE_REF for the old location. This happens
during the rename when we call btrfs_log_new_name();
6) We fsync the file, and that persists the log tree changes done in the
previous step (btrfs_log_new_name() only updates the log tree in
memory);
7) We have a power failure;
8) Next time the fs is mounted, log replay happens and when processing
the inode for directory "dir1" we find a new INODE_REF and add that
link, but we don't remove the old link of the inode since we have
not logged the old parent directory of the directory inode "dir1".
As a result after log replay finishes when we trigger writeback of the
subvolume tree's extent buffers, the tree check will detect that we have
a directory a hard link count of 2 and we get a mount failure.
The errors and stack traces reported in dmesg/syslog are like this:
Fix this by never logging a conflicting inode that is a directory and was
moved in the current transaction (its last_unlink_trans equals the current
transaction) and instead fallback to a transaction commit.
If SMT is disabled or a partial SMT state is enabled, when a new kernel
image is loaded for kexec, on reboot the following warning is observed:
kexec: Waking offline cpu 228.
WARNING: CPU: 0 PID: 9062 at arch/powerpc/kexec/core_64.c:223 kexec_prepare_cpus+0x1b0/0x1bc
[snip]
NIP kexec_prepare_cpus+0x1b0/0x1bc
LR kexec_prepare_cpus+0x1a0/0x1bc
Call Trace:
kexec_prepare_cpus+0x1a0/0x1bc (unreliable)
default_machine_kexec+0x160/0x19c
machine_kexec+0x80/0x88
kernel_kexec+0xd0/0x118
__do_sys_reboot+0x210/0x2c4
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
This occurs as add_cpu() fails due to cpu_bootable() returning false for
CPUs that fail the cpu_smt_thread_allowed() check or non primary
threads if SMT is disabled.
Fix the issue by enabling SMT and resetting the number of SMT threads to
the number of threads per core, before attempting to wake up all present
CPUs.
A zero length gss_token results in pages == 0 and in_token->pages[0]
is NULL. The code unconditionally evaluates
page_address(in_token->pages[0]) for the initial memcpy, which can
dereference NULL even when the copy length is 0. Guard the first
memcpy so it only runs when length > 0.
svc_rdma_copy_inline_range added rc_curpage (page index) to the page
base instead of the byte offset rc_pageoff. Use rc_pageoff so copies
land within the current page.
Clang is not happy about set but (in some cases) unused variable:
fs/nfsd/export.c:1027:17: error: variable 'inode' set but not used [-Werror,-Wunused-but-set-variable]
since it's used as a parameter to dprintk() which might be configured
a no-op. To avoid uglifying code with the specific ifdeffery just mark
the variable __maybe_unused.
The commit [1], which introduced this behaviour, is quite old and hence
the Fixes tag points to the first of the Git era.
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page.
Fixes: d7cc73972661 ("svcrdma: support multiple Read chunks per RPC") Cc: stable@vger.kernel.org Signed-off-by: Joshua Rogers <linux@joshua.hu> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> The bit vector that would set all REQUIRED and RECOMMENDED
> attributes that are supported by the EXCLUSIVE4_1 method of file
> creation via the OPEN operation. The scope of this attribute
> applies to all objects with a matching fsid.
There's nothing in RFC 8881 that states that suppattr_exclcreat is
or is not allowed to contain bits for attributes that are clear in
the reported supported_attrs bitmask. But it doesn't make sense for
an NFS server to indicate that it /doesn't/ implement an attribute,
but then also indicate that clients /are/ allowed to set that
attribute using OPEN(create) with EXCLUSIVE4_1.
The FATTR4_WORD2_TIME_DELEG attributes are also not to be allowed
for OPEN(create) with EXCLUSIVE4_1. It doesn't make sense to set
a delegated timestamp on a new file.
Fixes: 7e13f4f8d27d ("nfsd: handle delegated timestamps in SETATTR") Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By default, these devices use the quirk ALC294_FIXUP_ASUS_SPK. Not
using it causes the headphone jack to stop working. Therefore,
introduce a new quirk ALC287_FIXUP_TXNW2781_I2C_ASUS that binds
to the TAS amplifier while using that quirk.
Cc: stable@kernel.org Fixes: 18a4895370a7 ("ALSA: hda/realtek: Add match for ASUS Xbox Ally projects") Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251216211714.1116898-1-lkml@antheas.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of 8-bit formats the DMIC blob lookup also needs to
be modified to prefer the 32-bit blob when 8-bit format is used on FE.
At the same time we also need to make sure that in case 8-bit format is
used, but only 16-bit blob is available for DMIC then we will not try to
look for 8-bit blob (which is invalid) as fallback, but for a 16-bit one.
Fixes: c04c2e829649 ("ASoC: SOF: ipc4-topology: Add support for 8-bit formats") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20251215120648.4827-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL.
Reported-by: Aurélien Couderc <aurelien.couderc2002@gmail.com> Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs") Cc: Roland Mainz <roland.mainz@nrubsig.org> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> The bit vector that would set all REQUIRED and RECOMMENDED
> attributes that are supported by the EXCLUSIVE4_1 method of file
> creation via the OPEN operation. The scope of this attribute
> applies to all objects with a matching fsid.
There's nothing in RFC 8881 that states that suppattr_exclcreat is
or is not allowed to contain bits for attributes that are clear in
the reported supported_attrs bitmask. But it doesn't make sense for
an NFS server to indicate that it /doesn't/ implement an attribute,
but then also indicate that clients /are/ allowed to set that
attribute using OPEN(create) with EXCLUSIVE4_1.
Ensure that the SECURITY_LABEL and ACL bits are not set in the
suppattr_exclcreat bitmask when they are also not set in the
supported_attrs bitmask.
Fixes: 8c18f2052e75 ("nfsd41: SUPPATTR_EXCLCREAT attribute") Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path.
Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: caoping <caoping@cmss.chinamobile.com> Link: https://patch.msgid.link/20251204091058.1545151-1-caoping@cmss.chinamobile.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
inotify/fanotify do not allow users with no read access to a file to
subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the
same user to subscribe for watching events on children when the user
has access to the parent directory (e.g. /dev).
Users with no read access to a file but with read access to its parent
directory can still stat the file and see if it was accessed/modified
via atime/mtime change.
The same is not true for special files (e.g. /dev/null). Users will not
generally observe atime/mtime changes when other users read/write to
special files, only when someone sets atime/mtime via utimensat().
Align fsnotify events with this stat behavior and do not generate
ACCESS/MODIFY events to parent watchers on read/write of special files.
The events are still generated to parent watchers on utimensat(). This
closes some side-channels that could be possibly used for information
exfiltration [1].
The local variable 'val' was never clamped to -75000 or 180000 because
the return value of clamp_val() was not used. Fix this by assigning the
clamped value back to 'val', and use clamp() instead of clamp_val().
Cc: stable@vger.kernel.org Fixes: a557a92e6881 ("net: phy: marvell-88q2xxx: add support for temperature sensor") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Dimitri Fedrau <dima.fedrau@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251202172743.453055-3-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wake-on-Lan does currently not work for r8169 in DASH mode, e.g. the
ASUS Pro WS X570-ACE with RTL8168fp/RTL8117.
Fix by not returning early in rtl_prepare_power_down when dash_enabled.
While this fixes WoL, it still kills the OOB RTL8117 remote management
BMC connection. Fix by not calling rtl8168_driver_stop if WoL is enabled.
Fixes: 065c27c184d6 ("r8169: phy power ops") Signed-off-by: René Rebe <rene@exactco.de> Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20251202.194137.1647877804487085954.rene@exactco.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we exec a new task we forget to flush the set of locked GCS mode bits.
Since we do flush the rest of the state this means that if GCS is locked
the new task will be unable to enable GCS, it will be locked as being
disabled. Add the expected flush.
Fixes: fc84bc5378a8 ("arm64/gcs: Context switch GCS state for EL0") Cc: <stable@vger.kernel.org> # 6.13.x Reported-by: Yury Khrustalev <Yury.Khrustalev@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Tested-by: Yury Khrustalev <yury.khrustalev@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()") Reported-by: Ed Tsai <ed.tsai@mediatek.com> Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 6.17+ <stable@vger.kernel.org> # 6.17+ Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
