Jim Meyering [Sat, 22 Sep 2007 06:40:47 +0000 (08:40 +0200)]
rm: fix a tiny, nearly inconsequential bug.
Don't perform a "."-relative lstat, when the file in question
may well not be in ".". Although this is a bug, a few attempts
to exercise it on a linux-2.6.22 system failed. You probably need
a pre-openat system to trigger the failure. The consequence of this
bug would be a lower-quality diagnostic upon failed dir removal.
* src/remove.c (is_dir_lstat): Add a parameter, fd_cwd.
Use it instead of hard-coding AT_FDCWD.
(remove_entry): Call is_dir_lstat with fd_cwd.
Jim Meyering [Thu, 13 Sep 2007 10:13:35 +0000 (12:13 +0200)]
Enable some previously omitted test scripts. Add a test cross-check.
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
Jim Meyering [Thu, 13 Sep 2007 08:04:35 +0000 (10:04 +0200)]
Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.
tests/check.mk (top_srcdir): Define.
tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir),
$(abs_top_srcdir), and $(abs_top_builddir), since they're
defined via the included tests/check.mk.
* tests/misc/Makefile.am (TESTS): Add the new files.
* tests/Makefile.am (SUBDIRS): Remove the dir names.
* tests/od, tests/sha1sum, tests/shred, tests/stty: Remove the directories.
* configure.ac (AC_CONFIG_FILES): Remove the corresponding Makefile names.
Jim Meyering [Tue, 11 Sep 2007 21:30:09 +0000 (23:30 +0200)]
Move the two tests in tests/tee to tests/misc/.
* tests/tee/basic: Move this file to ...
* tests/misc/tee: ...here. Don't rely on $PROG in env.
* tests/tee/dash: Move this file to ...
* tests/misc/tee-dash: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tee.
* tests/Makefile.am (SUBDIRS): Remove tee.
* tests/tee: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
Jim Meyering [Mon, 10 Sep 2007 22:43:05 +0000 (00:43 +0200)]
Move the two tests in tests/sum/ to tests/misc/.
* tests/sum/basic-1: Move this file to ...
* tests/misc/sum: ...here. Don't rely on $PROG in env.
* tests/sum/sysv: Move this file to ...
* tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh.
* tests/misc/Makefile.am (TESTS): Add sum and sum-sysv.
* tests/Makefile.am (SUBDIRS): Remove sum.
* tests/sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
Jim Meyering [Thu, 6 Sep 2007 21:05:16 +0000 (23:05 +0200)]
Convert tests/mv, too.
* tests/other-fs-tmpdir: Before, all callers would exit 77 upon failure to
find the required dir. Now, exit 77 in this script so callers don't have to.
Adjust callers.
Jim Meyering [Thu, 16 Aug 2007 14:28:11 +0000 (16:28 +0200)]
Parallel "make check" support.
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
Jim Meyering [Fri, 7 Sep 2007 08:37:08 +0000 (10:37 +0200)]
chmod: don't ignore a dangling symlink
* NEWS: Mention the bug fix.
* src/chmod.c (process_file): Handle the case of FTS_SLNONE,
i.e., give a diagnostic saying we cannot operate on such a file.
* tests/chmod/thru-dangling: Compare new stderr output with expected.
Jim Meyering [Wed, 5 Sep 2007 08:57:54 +0000 (10:57 +0200)]
Adapt to new SELinux behavior: "?" vs. new "unlabeled"
* src/ls.c (gobble_file): Interpret the new "unlabeled" indicator
from getfilecon/lgetfilecon the same way we interpret a negative
return value: no security context. So we don't print the "+".
* tests/selinux: Recognize that "unlabeled" means insufficient
support for SELinux, just like "?".
Jim Meyering [Mon, 3 Sep 2007 08:38:14 +0000 (10:38 +0200)]
Don't change '-'s to '.'s in the string from git-describe.
* build-aux/git-version-gen: Leave '-'s in the string from git-describe.
Otherwise, s/-/./g would make it too hard to distinguish the base
version number from the appended .DD suffixes.
Jim Meyering [Sun, 2 Sep 2007 07:38:39 +0000 (09:38 +0200)]
bootstrap: uses rsync to download the .po files
* bootstrap (po_download_command_format): New global.
(download_po_files): Use rsync.
(update_po_files): Don't remove .po files after download,
so future rsync runs can take advantage of the copies.
Jim Meyering [Fri, 31 Aug 2007 20:17:53 +0000 (22:17 +0200)]
Solve the unnecessary-.po-file-regeneration problem once and for all.
* bootstrap (download_po_files): New function, renamed from
get_translations. Now, downloads, but doesn't update LINGUAS.
(update_po_files): New function.
Jim Meyering [Thu, 30 Aug 2007 08:47:11 +0000 (10:47 +0200)]
Perform the s,rm,/bin/rm, fix-up properly. No more kludge.
* Makefile.am (EXTRA_DIST): Remove .kludge-stamp.
(.kludge-stamp): Remove rule. Instead, ...
(dist-hook): Do the job here, operating on the file in $(distdir).
(rm_subst): Adjust regexp to match "rm -f rm$(EXEEXT)", not "rm -f rm".
(MAINTAINERCLEANFILES): s/+=/=/, now that this is the sole use.
(dist-hook): Remove the legacy-from-cvs install-sh is-executable check.
* .gitignore: Remove .kludge-stamp.
Jim Meyering [Sat, 25 Aug 2007 22:48:41 +0000 (00:48 +0200)]
Make inter-release --version output more useful.
Now, each snapshot has a version "number" like 6.9-219-g58ddd,
which indicates that it is built using the 219th change set
(in _some_ repository) following the "v6.9" tag, and that 58ddd
is a prefix of the commit SHA1.
* build-aux/git-version-gen: New file.
* configure.ac: Run it to set the version.
* Makefile.am (dist-hook): Arrange so that .version appears only
in distribution tarballs, never in a checked-out repository.
* .gitignore: Add .version here, too. Just in case.
Jim Meyering [Tue, 28 Aug 2007 16:24:48 +0000 (18:24 +0200)]
By default, do not install hostname anymore; no kidding, this time.
* src/Makefile.am (EXTRA_PROGRAMS): Remove hostname from this list,
now that it's no longer being installed by default. This should
have been part of the 2007-08-21 change.
(check-duplicate-no-install): New rule to ensure this doesn't
happen again.
(check): Depend on it.
Jim Meyering [Mon, 27 Aug 2007 22:14:20 +0000 (00:14 +0200)]
Add file system type names and magic numbers from "man 2 statfs".
* src/stat.c (human_fstype): Also handle BEFS, BFS, BINFMT_MISC,
FUSECTL, HUGETLBFS, NFSD and OPENPROM.
Jim Meyering [Mon, 27 Aug 2007 21:46:49 +0000 (23:46 +0200)]
Add some file system type names and magic numbers from glibc.
* src/stat.c (human_fstype): Add any file system names and values
present in glibc's linux_fsinfo.h but not in this list.
Alphabetize the S_* names and capitalize the hexadecimal constants.
Jim Meyering [Fri, 24 Aug 2007 21:54:54 +0000 (23:54 +0200)]
bootstrap: Ignore more.
* bootstrap (symlink_to_dir): Add a directory name like
uniwidth to e.g., lib/.gitignore.
(slurp): Handle the sys_stat_.h -> sys mapping, too.
* .hgignore: Remove this file, too.
* Makefile.am (EXTRA_DIST): Remove .gitignore and .hgignore.
Jim Meyering [Fri, 24 Aug 2007 21:53:19 +0000 (23:53 +0200)]
No longer version-control .???ignore files in lib/, m4/, and po/.
* .gitignore: Ignore a few files in lib/, m4/, and po/ that are not
picked up automatically.
* lib/.gitignore, lib/.cvsignore: Remove files.
* m4/.gitignore, m4/.cvsignore: Remove files.
* po/.gitignore, po/.cvsignore: Remove files.
Jim Meyering [Fri, 24 Aug 2007 20:40:23 +0000 (22:40 +0200)]
Create .gitignore and/or .cvsignore from scratch, if absent.
This is in preparation for my removing those files from version
control in the directories managed by gnulib-tool.
* bootstrap: New setting: vc_ignore.
(insert_sorted_if_absent): Create $file if absent.
Adapt to new, possibly empty, list: $vc_ignore.
Jim Meyering [Fri, 24 Aug 2007 12:07:06 +0000 (14:07 +0200)]
Arrange to use tag names like vM.N, rather than COREUTILS-M_N.
* Makefile.maint (this-vc-tag) [git]: Simply use v$(VERSION).
(this-vc-tag-regexp): New variable.
(vc-tag-check): Use it, rather than $(this-vc-tag).
Jim Meyering [Thu, 23 Aug 2007 09:51:01 +0000 (11:51 +0200)]
Don't let ln be a party to destroying user data.
* src/ln.c: Include "file-set.h", "hash.h" and "hash-triple.h".
(dest_set, DEST_INFO_INITIAL_CAPACITY): New globals.
(do_link): Refuse to remove a just-created link.
Record a name,dev,ino triple for each link we create.
(main): Initialize dest_set, if needed.
* tests/mv/childproof: Test for the above fix.
* NEWS: Document this.
Reported by Eric Blake.
Jim Meyering [Thu, 23 Aug 2007 08:47:16 +0000 (10:47 +0200)]
Move functions from copy.c into new modules, since ln needs them, too.
* bootstrap.conf (gnulib_modules): Add file-set.
* gl/lib/file-set.c (record_file, seen_file): Functions from copy.c.
* gl/lib/file-set.h: Add prototypes.
* gl/lib/hash-triple.c (triple_hash, triple_hash_no_name):
(triple_compare, triple_free): Functions from copy.c.
* gl/lib/hash-triple.h (struct F_triple): Define. From copy.c.
Add prototypes.
* gl/modules/file-set: New module.
* gl/modules/hash-triple: New module.
* src/Makefile.am (copy_sources): New variable.
(ginstall_SOURCES, cp_SOURCES, mv_SOURCES): Use it.
* src/copy.c: Include hash-triple.h.
No longer include hash-pjw.h.
(copy_internal): Don't pass a NULL third argument to record_file,
since that function no longer accepts that.
(record_file): Move this function to file-set.c.
Along the way, remove the code to allow a NULL stat-buffer pointer.
Adjust sole caller.
(seen_file): Move this function to file-set.c.
(struct F_triple): Move declaration to hash-triple.h.
(triple_compare, triple_free, triple_hash, triple_hash_no_name):
Move these functions to hash-triple.c.
Jim Meyering [Thu, 23 Aug 2007 07:50:58 +0000 (09:50 +0200)]
bootstrap: generate more names and fix a bug
* bootstrap (slurp): Don't test for existence of $copied,
which is usually a newline-separated list of file names.
When generating ignorable names, also map .sin to .sed,
.gperf to .c, and .y to .c.
Jim Meyering [Wed, 22 Aug 2007 18:02:34 +0000 (20:02 +0200)]
Change "rm --verbose -r a//" not to print extra slashes in a///b
* src/remove.c (push_dir): Don't copy trailing slashes onto the stack.
Reported by François Pinard.
* tests/rm/v-slash: New file. Test for the above change.
* tests/rm/Makefile.am (TESTS): Add v-slash.
Jim Meyering [Wed, 22 Aug 2007 14:56:13 +0000 (16:56 +0200)]
Don't include "getline.h".
That file has just been removed from gnulib;
its declarations are now in <stdio.h>.
* src/md5sum.c: Likewise.
* src/dircolors.c: Likewise.
Bob Proulx [Tue, 21 Aug 2007 04:04:45 +0000 (22:04 -0600)]
Clarify touch documentation of file arguments.
* src/touch.c (usage): Improve wording of documentation regarding
file argument handling and special handling of - argument.
* doc/coreutils.texi (touch invocation): Likewise.
Documentation problem reported by Vincent Lefevre.
Paul Eggert [Mon, 20 Aug 2007 15:27:53 +0000 (17:27 +0200)]
NEWS: note that a cp -p bug fixed in 6.7 affected releases before 6.0.
Problem reported by Soren Spies in
<http://lists.gnu.org/archive/html/bug-coreutils/2007-08/msg00106.html>.
To be conservative, just say the bug was in all versions through 6.6.
Jim Meyering [Sat, 18 Aug 2007 06:50:00 +0000 (08:50 +0200)]
Run each Coreutils.pm-based test in its own subdirectory.
* tests/CuTmpdir.pm: New file.
* tests/Makefile.am (EXTRA_DIST): Add CuTmpdir.pm.
* tests/misc/od, tests/misc/base64, tests/misc/basename:
* tests/misc/cut, tests/misc/date, tests/misc/dirname:
* tests/misc/expand, tests/misc/fold, tests/misc/head-elide-tail:
* tests/misc/paste-no-nl, tests/misc/pr, tests/misc/sha224sum:
* tests/misc/sha256sum, tests/misc/sha384sum, tests/misc/sha512sum:
* tests/misc/sort-merge, tests/misc/stat-printf, tests/misc/test-diag:
* tests/misc/wc-files0-from, tests/misc/xstrtol:
* tests/dd/skip-seek, tests/dircolors/simple, tests/du/files0-from:
* tests/expr/basic, tests/factor/basic, tests/fmt/basic:
* tests/ls-2/tests, tests/md5sum/basic-1, tests/md5sum/newline-1:
* tests/seq/basic, tests/sha1sum/basic-1, tests/sha1sum/sample-vec:
* tests/sum/basic-1, tests/tsort/basic-1, tests/unexpand/basic-1:
* tests/mv/i-1, tests/rm/empty-name, tests/rm/unreadable: Use it.
* tests/misc/test-diag: Use "$ENV{abs_top_builddir}/src/test",
not "../../src/test", so it works when run from a subdirectory.
* tests/ls-2/tests: Create temp files and dirs from within the perl
script, so that they're removed, when run from a subdirectory.
Jim Meyering [Thu, 16 Aug 2007 17:18:29 +0000 (19:18 +0200)]
Consolidate od tests.
* tests/misc/od: Perform od-zero-len's test here.
Include boilerplate code, so tests run in a subdirectory.
* tests/misc/od-zero-len: Remove this file.
Jim Meyering [Wed, 15 Aug 2007 20:44:45 +0000 (22:44 +0200)]
od --skip (-j) works even on files in /proc, when the kernel lies
* src/od.c (skip): Don't let kernel misinformation (nonempty files
in /proc with stat.st_size == 0) make "od -j N" misbehave.
Patch by Paul Eggert.
* NEWS: Document this work-around.
* tests/misc/od-zero-len: New file, test for the above.
Jim Meyering [Tue, 14 Aug 2007 07:46:32 +0000 (09:46 +0200)]
od: fix a bug that arises when skipping exact length of file
* NEWS: Document the bug fix.
* src/od.c (skip): Call fseek even when n_skip is exactly the
same as the length of the current file. Otherwise, the next
iteration would use unadjusted input stream pointer, thus ignoring
the desired "skip". Report and patch by Paul GHALEB.
projects / thirdparty / coreutils.git / log
