Richard Purdie [Thu, 9 Mar 2017 00:14:38 +0000 (00:14 +0000)]
base/bitbake.conf: Filter contents of PATH to only allow whitelisted tools
We currently have a determinism problem in that the host tools present
in PATH can influence the build. In particular, the presence of pkg-config
on the build host can mask missing pkgconfig class dependencies.
This adds in a new HOSTTOOLS variable and then uses it to set up a directory
of symlinks to the whitelisted host tools. This directory is placed as PATH
instead of the usual /usr/bin:/bin and so on.
This should improve determinism of builds and avoid the issues which have
been particularly obvious since the introduction of recipe specific sysroots.
If users find there is a tool missing, they can extend HOSTTOOLS from a global
class or global conf file.
Right now the settings should be enough to build everything in OE-Core.
Richard Purdie [Sat, 11 Mar 2017 10:37:38 +0000 (10:37 +0000)]
u-boot-mkimage: Fix use of 'cc' instead of BUILD_CC
OE needs to be able to change the default compiler. If we pass in HOSTCC
through the make command, it overwrites not only this setting but also the
setting in tools/Makefile wrapped in ifneq ($(CROSS_BUILD_TOOLS),) which
breaks the build.
We therefore add a way of changing the default in the top level Makefile
without interfering with the other setting.
I've emailed this workaround to Masahiro Yamada for discussion.
Richard Purdie [Fri, 10 Mar 2017 12:26:04 +0000 (12:26 +0000)]
quilt: Avoid hardcoding paths into output
Avoids:
quilt-0.65-r0 do_package_qa: QA Issue: /usr/lib/quilt/ptest/quilt/scripts/edmail contained in package
quilt-ptest requires /media/build1/poky/build/tmp/hosttools/perl, but no providers found in
RDEPENDS_quilt-ptest? [file-rdeps]
Richard Purdie [Thu, 9 Mar 2017 13:23:58 +0000 (13:23 +0000)]
quilt: Don't add hardcoded links to utilities
This triggers warnings about absolute symlink paths with the PATH changes.
In reality we simply don't need/care about these so just remove/disable
them.
Richard Purdie [Thu, 9 Mar 2017 22:13:36 +0000 (22:13 +0000)]
toolchain-shar-extract.sh: Ensure sbin directories are in PATH in clean environment
For the PATH host tool whitelisting to work, the sbin directories need to be
in PATH. In the cleaned SDK environment on some distros, this isn't the case
and the SDK would then fail to setup there. This adds code to add such paths
if they do happen to be missing, ugly, but unblocks the PATH whitelisting
which I believe to be important.
Joshua Lock [Wed, 8 Mar 2017 17:24:14 +0000 (17:24 +0000)]
chkconfig-alternatives-native: fix obey_variables
This postfunc assumes it's run from S, whereas that seems not to always
be the case in practice. Explicitly define the full path of the file
we wish to sed.
Haiqing Bai [Wed, 8 Mar 2017 09:27:30 +0000 (17:27 +0800)]
busybox: ifupdown:pass interface device name for ipv6 route command
IPv6 routes need the device argument for link-local routes, or they
cannot be used at all. E.g. "gateway fe80::def" seems to be used in
some places, but kernel refuses to insert the route unless device
name is explicitly specified in the route addition.
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
David Vincent [Mon, 23 Jan 2017 13:59:16 +0000 (14:59 +0100)]
openssl: Fix symlink creation
Symlinking the openssl configuration file at install time results in
errors when overriding it using an external package which also provides
openssl-conf. This should be done as a postinstall task for such
packages.
Signed-off-by: David Vincent <freesilicon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel Schultz [Tue, 7 Mar 2017 13:41:56 +0000 (14:41 +0100)]
wic: filemap: Fixed spared_copy skip
This patches removes the empty space in front of the copied file which
was skipped. Without this reduction it's not possible to place a
partition with rawcopy and skip parameter on a desired alignment.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: José Bollo <jose.bollo@iot.bzh> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Mon, 6 Mar 2017 23:29:48 +0000 (15:29 -0800)]
conf/machine/include: enable hardfloat by default for ARMv6 and above
Defaulting to softfp probably isn't the best choice anymore,
especially as there are now ARM BSP layers which leave DEFAULTTUNE
entirely up to the distro:
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Tue, 7 Mar 2017 01:42:25 +0000 (17:42 -0800)]
dropbear: drop support for DSA host keys in dropbear init script
Bring the dropbear init script into sync with the systemd service
file (dropbearkey.service supports RSA host keys only) and with
recent versions of openssh which deprecate DSA host keys.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Wed, 8 Mar 2017 13:21:52 +0000 (15:21 +0200)]
vulkan: Add recipe for Vulkan common loader
Add a recipe for vulkan loader library and the vulkaninfo binary.
Vulkan can be built to support X11 or wayland or both. There is
currently no support for building tests, validation layers or even
the demos as that would require a bunch of otherwise unnecessary
dependencies.
Fix the build on musl by defaulting to getenv() if secure_getenv()
is not available.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Tue, 28 Feb 2017 09:26:57 +0000 (11:26 +0200)]
mesa: Enable vulkan driver for intel
PACKAGECONFIG "vulkan" enables building libvulkan_intel.so.
The radeon driver can be added to recipe as well but it requires
llvm so recent that I couldn't test it.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 6 Mar 2017 15:31:00 +0000 (17:31 +0200)]
sstate.bbclass: update .siginfo atime
.siginfo files are not being accessed from local or NFS-mounted
sstate mirrors when sstate package is installed, so their atime
is not updated. If sstate mirror is cleaned based on access time,
they get deleted, even though they are still being used.
Updated atime of .siginfo symlinks with 'touch -a'. This command
dereferences symlinks pointing to the local mirror and updates
atime of the .siginfo file on the mirror.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Wed, 8 Mar 2017 17:24:17 +0000 (17:24 +0000)]
lib/oeqa/selftest/bbtests: update test_non_gplv3 to use selftest-ed
GPLv2 recipes have been moved to a new layer (meta-gplv2), instead of
readline perform this test on the selftest-ed recipe in meta-selftest
which has gplv2 and gplv3 variants.
Tested with oe-selftest -r bbtests.BitbakeTests.test_non_gplv3
Joshua Lock [Wed, 8 Mar 2017 17:24:16 +0000 (17:24 +0000)]
lib/oeqa/selftest/oescripts: make test_cleanup_workdir use selftest-ed
Use a recipe which is bundled in the meta-selftest layer for this test,
rather than relying on OE-Core remaining static (or updating the tests
when OE-Core changes recipes).
Tested with oe-selftest -r oescripts.TestScripts.test_cleanup_workdir
Joshua Lock [Wed, 8 Mar 2017 17:24:15 +0000 (17:24 +0000)]
meta-selftest: add selftest-ed recipes
The oe-selftest oescripts.TestScripts.test_cleanup_workdir was using
gzip and the GPLv2 variant to test cleanup of the workdir. This broke
with the removal of GPLv2 recipes from OE-Core.
Instead of relying on recipes in OE-Core remaining static we should
ensure that meta-selftest provides recipes required for the tests to pass.
To that end we take a copy of the current GPLv2 and GPLv3 variants of ed
and include them in meta-selftest as new recipes.
We chose ed over gzip as gzip has dependencies which would require
additional GPLv2 recipes to be included in meta-selftest.
Martin Jansa [Wed, 8 Mar 2017 10:03:15 +0000 (11:03 +0100)]
gcc-runtime: Fix QA issue
ERROR: gcc-runtime-6.3.0-r0 do_package: QA Issue: gcc-runtime: Files/directories were installed but not shipped in any package:
/usr/lib/libmpxwrappers.la
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
gcc-runtime: 1 installed and not shipped files. [installed-vs-shipped]
Peter Marko [Mon, 27 Feb 2017 19:26:37 +0000 (20:26 +0100)]
zlib: Upgrade 1.2.8 -> 1.2.11
Licence updated by removing its first line which was containing
copyright notice including year, which could change quite often.
Additional empty line was deleted, too.
Signed-off-by: Peter Marko <peter.marko@siemens.com> Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nikunj Kela [Tue, 14 Feb 2017 18:15:28 +0000 (18:15 +0000)]
relocate_sdk.py: skip debug files from relocation
Debug files only have debug symbols hence don't need
to be relocated. Relocation script throws errors when
run on the debug files. This change skips these files
that have zero size.
Signed-off-by: Nikunj Kela <nkela@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Mon, 2 Jan 2017 07:17:56 +0000 (17:17 +1000)]
qemu: Move recipe version specific patches and features to recipe
Move all the version specific patches, overrides and configuration that
are in qemu.inc to the versioned QEMU recipe.
This includes moving patches that target the versioned recipe, ptest
configuration (which is not available in QEMU by default) and the
installing of the powerpc_rom.bin. All these patches/files are also
only located in the FILESEXTRAPATHS that is valid from the recipe file
and not from qemu.inc itself.
The purpose of this change is to make the qemu.inc re-usable for
multiple versions of QEMU as well as forks and recipes that intend to
provide custom patches.
Nathan Rossi [Mon, 2 Jan 2017 07:10:16 +0000 (17:10 +1000)]
qemu: Convert KVMOPTS to PACKAGECONFIG
Move the KVMOPTS configuration checks and option setting to a
PACKAGECONFIG option.
This also changes the checking of KVM support on the host build machine
so that it is processed as a PACKAGECONFIG _remove for class-native
only. The darwin/mingw32 overrides are kept and applied as _remove
overrides.
Nathan Rossi [Mon, 2 Jan 2017 06:57:23 +0000 (16:57 +1000)]
qemu: Consolidate EXTRA_OECONF
Consolidate the configure options into the EXTRA_OECONF variable,
including merging any native(sdk) specific options.
This consolidation also makes the use of 'system' pixman in the
nativesdk case, this is desirable as the QEMU internal pixman may not be
available (using QEMU git as opposed to tarball) and pixman is already
in DEPENDS. Additionally the QEMU configure recommends to use the system
pixman if available.
Additionally move the options specified in the do_configure into the
EXTRA_OECONF variable. And flesh out all the target directories.
Nathan Rossi [Mon, 2 Jan 2017 06:45:40 +0000 (16:45 +1000)]
qemu: Improve and add PACKAGECONFIG options
Move the '--disable-bluez' and '--disable-iscsi' options to
PACKAGECONFIG. And added the ${BLUEZ} dependency.
Fix up the 'gcrypt' option to depend on 'libgcrypt' instead of gcrypt.
This is the expected dependency as noted in the QEMU configure help.
Handle the '--audio-drv-list' option inside the PACKAGECONFIG[alsa]
args. The previous setting uses a ',' to denote the options for the arg
however a space inside quotes is also acceptable and allows the arg to
be used into the PACKAGECONFIG flag.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 6 Mar 2017 15:10:12 +0000 (17:10 +0200)]
qemurunner.py: ignore decode errors
qemu output can contain control characters. This cause qemurunner
API to crash when decoding the output to utf-8:
Traceback (most recent call last):
File "/usr/lib64/python3.4/threading.py", line 911, in _bootstrap_inner
self.run()
File "meta/lib/oeqa/utils/qemurunner.py", line 472, in run
threading.Thread.run(self)
File "/usr/lib64/python3.4/threading.py", line 859, in run
self._target(*self._args, **self._kwargs)
File "meta/lib/oeqa/utils/qemurunner.py", line 465, in threadtarget
self.eventloop()
File "meta/lib/oeqa/utils/qemurunner.py", line 526, in eventloop
self.logfunc(data)
File "meta/lib/oeqa/utils/qemurunner.py", line 77, in log
msg = msg.decode("utf-8")
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0:
unexpected end of data
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Mon, 6 Mar 2017 15:10:10 +0000 (17:10 +0200)]
targetcontrol: add image_fstype argument to commands.runqemu
qemu runner picks up first fsimage type from the hard-coded
list of supported types. This makes it impossible to test
particular image type unless it's not ext4(first type in
the hardcoded list of types).
Added image_fstypes argument to commands.runqemu and QemuTarget
__init__ to specify type of the image to run qemu with.
This will be used to pass wic image type to test efi wic images.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Tue, 7 Mar 2017 04:58:47 +0000 (20:58 -0800)]
meta: start to ignore the largefile distro feature
The largefile distro feature has been enabled by default in oe-core
for a long time and, more recently, also in poky-tiny. Building
without the largefile distro feature receives little or no testing.
Many packages now enable LFS without exposing a configure option, so
there should be very little expectation that disabling the distro
feature will result in a distro which globally disables LFS.
Respecting the distro feature adds a maintenance over-head and may be
the source of configurations oddities (e.g. dbus-native currently
builds with LFS disabled for no clear reason - fixed by this commit).
Ignore the largefile distro feature more widely, as a first step
towards deprecating and eventually removing it.
Mark Hatle [Tue, 7 Mar 2017 18:54:33 +0000 (12:54 -0600)]
gpgme: Fix issue building for the target
gpgme failed when configuring since you can only configure for one python
system at a time (via the inherits). So we need to have a PACKAGECONFIG
that defines which one [or neither] you want to use.
The prior pkgconfig patch introduced the usage of the variable PKG_CONFIG,
which is not defined anywhere. Define this.
When building the python module, we can not call gpg-error-config, so we
need to find an alternative way of finding the information the setup.py.in
requires. (In this case, it's easy to just use the environment
STAGING_INCDIR.)
Some task events are missing the 'virtual:native[sdk]:' prefixes.
The Toaster has code to help match missing prefixes, but needs
additional help resolving between 'native:' and 'nativesdk:', by
way of the '_package' event field.
Signed-off-by: David Reyna <David.Reyna@windriver.com> Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 2 Mar 2017 12:04:08 +0000 (12:04 +0000)]
recipes: Move out stale GPLv2 versions to a seperate layer
These are recipes where the upstream has moved to GPLv3 and these old
versions are the last ones under the GPLv2 license.
There are several reasons for making this move. There is a different
quality of service with these recipes in that they don't get security
fixes and upstream no longer care about them, in fact they're actively
hostile against people using old versions. The recipes tend to need a
different kind of maintenance to work with changes in the wider ecosystem
and there needs to be isolation between changes made in the v3 versions
and those in the v2 versions.
There are probably better ways to handle a "non-GPLv3" system but right
now having these in OE-Core makes them look like a first class citizen
when I believe they have potential for a variety of undesireable issues.
Moving them into a separate layer makes their different needs clearer, it
also makes it clear how many of these there are. Some are probably not
needed (e.g. mc), I also wonder whether some are useful (e.g. gmp)
since most things that use them are GPLv3 only already. Someone could
now more clearly see how to streamline the list of recipes here.
I'm proposing we mmove to this separate layer for 2.3 with its future
maintinership and testing to be determined in 2.4 and beyond.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster [Wed, 1 Mar 2017 03:48:31 +0000 (19:48 -0800)]
tzdata: update to 2017a
Briefly: Southern Chile moves from -04/-03 to -03, and Mongolia
discontinues DST.
Changes to future time stamps
Mongolia no longer observes DST. (Thanks to Ganbold Tsagaankhuu.)
Chile's Region of Magallanes moves from -04/-03 to -03 year-round.
Its clocks diverge from America/Santiago starting 2017-05-13 at
23:00, hiving off a new zone America/Punta_Arenas. Although the
Chilean government says this change expires in May 2019, for now
assume it's permanent. (Thanks to Juan Correa and Deborah
Goldsmith.) This also affects Antarctica/Palmer.
Changes to past time stamps
Fix many entries for historical time stamps for Europe/Madrid
before 1979, to agree with tables compiled by Pere Planesas of the
National Astronomical Observatory of Spain. As a side effect,
this changes some time stamps for Africa/Ceuta before 1929, which
are probably guesswork anyway. (Thanks to Steve Allen and
Pierpaolo Bernardi for the heads-ups, and to Michael Deckers for
correcting the 1901 transition.)
Ecuador observed DST from 1992-11-28 to 1993-02-05.
(Thanks to Alois Treindl.)
Asia/Atyrau and Asia/Oral were at +03 (not +04) before 1930-06-21.
(Thanks to Stepan Golosunov.)
Changes to past and future time zone abbreviations
Switch to numeric time zone abbreviations for South America, as
part of the ongoing project of removing invented abbreviations.
This avoids the need to invent an abbreviation for the new Chilean
new zone. Similarly, switch from invented to numeric time zone
abbreviations for Afghanistan, American Samoa, the Azores,
Bangladesh, Bhutan, the British Indian Ocean Territory, Brunei,
Cape Verde, Chatham Is, Christmas I, Cocos (Keeling) Is, Cook Is,
Dubai, East Timor, Eucla, Fiji, French Polynesia, Greenland,
Indochina, Iran, Iraq, Kiribati, Lord Howe, Macquarie, Malaysia,
the Maldives, Marshall Is, Mauritius, Micronesia, Mongolia,
Myanmar, Nauru, Nepal, New Caledonia, Niue, Norfolk I, Palau,
Papua New Guinea, the Philippines, Pitcairn, Qatar, Réunion, St
Pierre & Miquelon, Samoa, Saudi Arabia, Seychelles, Singapore,
Solomon Is, Tokelau, Tuvalu, Wake, Vanuatu, Wallis & Futuna, and
Xinjiang; for 20-minute daylight saving time in Ghana before 1943;
for half-hour daylight saving time in Belize before 1944 and in
the Dominican Republic before 1975; and for Canary Islands before
1946, for Guinea-Bissau before 1975, for Iceland before 1969, for
Indian Summer Time before 1942, for Indonesia before around 1964,
for Kenya before 1960, for Liberia before 1973, for Madeira before
1967, for Namibia before 1943, for the Netherlands in 1937-9, for
Pakistan before 1971, for Western Sahara before 1977, and for
Zaporozhye in 1880-1924.
For Alaska time from 1900 through 1967, instead of "CAT" use the
abbreviation "AST", the abbreviation commonly used at the time
(Atlantic Standard Time had not been standardized yet). Use "AWT"
and "APT" instead of the invented abbreviations "CAWT" and "CAPT".
Use "CST" and "CDT" instead of invented abbreviations for Macau
before 1999 and Taiwan before 1938, and use "JST" instead of the
invented abbreviation "JCST" for Japan and Korea before 1938.
Change to database entry category
Move the Pacific/Johnston link from 'australasia' to 'backward',
since Johnston is now uninhabited.
Armin Kuster [Wed, 1 Mar 2017 03:48:30 +0000 (19:48 -0800)]
tzcode-native: update to 2017a
Changes to code
zic no longer mishandles some transitions in January 2038 when it
attempts to work around Qt bug 53071. This fixes a bug affecting
Pacific/Tongatapu that was introduced in zic 2016e. localtime.c
now contains a workaround, useful when loading a file generated by
a buggy zic. (Problem and localtime.c fix reported by Bradley
White.)
zdump -i now outputs non-hour numeric time zone abbreviations
without a colon, e.g., "+0530" rather than "+05:30". This agrees
with zic %z and with common practice, and simplifies auditing of
zdump output.
zdump is now buildable again with -DUSE_LTZ=0.
(Problem reported by Joseph Myers.)
zdump.c now always includes private.h, to avoid code duplication
with private.h. (Problem reported by Kees Dekker.)
localtime.c no longer mishandles early or late timestamps
when TZ is set to a POSIX-style string that specifies DST.
(Problem reported by Kees Dekker.)
date and strftime now cause %z to generate "-0000" instead of
"+0000" when the UT offset is zero and the time zone abbreviation
begins with "-".
Changes to documentation and commentary
The 'Theory' file now better documents choice of historical time
zone abbreviations. (Problems reported by Michael Deckers.)
tz-link.htm now covers leap smearing, which is popular in clouds.
Marek Vasut [Tue, 28 Feb 2017 19:41:10 +0000 (20:41 +0100)]
u-boot: Fix handling of CMD_LICENSE in u-boot-mkimage
Only ever change the CMD_LICENSE in the u-boot config if it is enabled
to prevent corruption of the config file. In case the CMD_LICENSE was
already disabled, the sed substitution inserted another "# " in front
of the CMD_LICENSE which triggered a restart of Kconfig oldconfig and
failed the build.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Fri, 24 Feb 2017 11:57:31 +0000 (12:57 +0100)]
guile: fix a bashism
A following flaw was detected by verify-bashisms script:
......
meta/recipes-devtools/guile/guile_2.0.13.bb
possible bashism in guile_cross_config line 94 ($'...' should be "$(printf '...')"):
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
libgpg-error: Don't replace the syscfg header for mingw32
For mingw32 targets do not attempt to replace the
syscfg/lock-obj-pub.*.h as for mingw32 there are no arch specific
headers that are included in the libgpg-error source.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Tue, 28 Feb 2017 09:26:56 +0000 (11:26 +0200)]
mesa: Upgrade 13.0.4 -> 17.0.0
17.0.0 is considered a development release: 17.0.1 is expected to be
the first stable in this series. Typically the .1 release comes about
two weeks after .0.
* New feature release with lots of changes
* Versioning change (17 as in 2017, no longer relates to GL bumps)
* OpenGL 4.5 support on Haswell
* mesa now implements its own sha1 instead of having 5
configurable sha-providers
* Remove libxvmcsoftpipe packaging, the library hasn't
existed since 2013
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mikko Rapeli [Wed, 1 Mar 2017 09:08:47 +0000 (11:08 +0200)]
buildhistory.bbclass: use tabs as separator in installed-package-sizes.txt
All other fields are separated by tabs except KiB and binary package
name. This helps users, *cough managers*, who import this file into
MS Excel to calculate file system usage summaries.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass: Give sanity check function an opt-out variable
Having no opt-out method and adding the task to linux-yocto.inc was
causing issues. For example, linux-yocto-dev would often fail because
it uses AUTOREV with no way to dynamically change the PV.
Add a variable to turn off the sanity check, allowing an easy opt out,
and set the opt-out variable in linux-yocto-dev, fixing the issue with
AUTOREV.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
package.bbclass: Add SHLIB detection support for mingw targets
Add support to detect dll files as shared objects as well as process
Windows .dll and .exe files to determine the runtime libraries
dependencies.
This implementation is sufficient to detect and map runtime library
dependencies between packages. And does not implement any version naming
conventions that might apply for .dll files (e.g. lib*-x.dll).
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
update-alternatives.bbclass: Disable for mingw32 targets
When building for mingw32 targets (e.g. nativesdk cross compiling for
windows), disable the dependency on update-alternatives as the Windows
platform does not support symlinks or package management.
This avoids the complex (partly non-buildable for mingw32) dependency
chain virtual/update-alternatives -> opkg-utils -> python -> ...
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 27 Jan 2017 22:29:10 +0000 (14:29 -0800)]
bitbake.conf: replace USE_LDCONFIG with new "ldconfig" distro feature
USE_LDCONFIG could previously be set to 0 by distros which do not
require ldconfig or ld.so.conf on the target. Since more and more
recipes may need to respect that option, replace the ad-hoc variable
with a distro feature.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Aníbal Limón [Mon, 20 Feb 2017 21:12:49 +0000 (15:12 -0600)]
yocto-compat-layer.py: Add script to YP Compatible Layer validation
The yocto-compat-layer script serves as a tool to validate the alignament
of a layer with YP Compatible Layers Programme [1], is based on an RFC
sent to the ML to enable automatic testing of layers [2] that wants to
be YP Compatible.
The tool takes an layer (or set of layers) via command line option -l
and detects what kind of layer is distro, machine or software and then
executes a set of tests against the layer in order to validate the
compatibility.
The tests currently implemented are:
common.test_readme: Test if a README file exists in the layer and isn't
empty.
common.test_parse: Test for execute bitbake -p without errors.
common.test_show_environment: Test for execute bitbake -e without errors.
common.test_signatures: Test executed in BSP and DISTRO layers to review
doesn't comes with recipes that changes the signatures.
bsp.test_bsp_defines_machines: Test if a BSP layers has machines
configurations.
bsp.test_bsp_no_set_machine: Test the BSP layer to doesn't set
machine at adding layer.
distro.test_distro_defines_distros: Test if a DISTRO layers has distro
configurations.
distro.test_distro_no_set_distro: Test the DISTRO layer to doesn't set
distro at adding layer.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dmitry Rozhkov [Tue, 21 Feb 2017 15:18:08 +0000 (17:18 +0200)]
scripts/runqemu: avoid overridden user input for bootparams
Currently runqemu hardcodes the "ip=" kernel boot parameter
when configuring QEMU to use tap or slirp networking. This makes
the guest system to have a network interface pre-configured
by kernel and causes systemd to fail renaming the interface
to whatever pleases it:
Feb 21 10:10:20 intel-corei7-64 systemd-udevd[201]: Error changing
net interface name 'eth0' to 'enp0s3': Device or resource busy,
Always append user input for kernel boot params after the ones
added by the script. This way user input has priority over runqemu's
default params.
Aníbal Limón [Thu, 16 Feb 2017 17:10:30 +0000 (11:10 -0600)]
scripts/runqemu: Add always ttyS1 when no serial options are specified
We always wants ttyS0 and ttyS1 in qemu machines (see SERIAL_CONSOLES),
if not serial or serialtcp options was specified only ttyS0 is created
and sysvinit shows an error trying to enable ttyS1:
INIT: Id "S1" respawning too fast: disabled for 5 minutes
Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
