Scott Rifenbark [Wed, 27 Sep 2017 23:56:56 +0000 (16:56 -0700)]
kernel-dev: Updates to where kernel metadata is found
"cfg" and "features" used to reside in the linux-yocto-x.x repo
under meta. They are now in a separate repo named
yocto-kernel-cache. I rewrote a couple spots that incorrectly
referenced the old location.
This section was largely redundant now. The small things that did
add value I placed in other areas of the chapter 2. One was a new
section on expanding variables using bitbake -e. Another was a bit
about the defconfig file. And a small procedure on how to create
config fragments using the "diffconfig" command was retained.
Links from the dev-manual and the ref-manual were adjusted as well.
Scott Rifenbark [Wed, 27 Sep 2017 00:25:34 +0000 (17:25 -0700)]
kernel-dev: Moved "dirty" kernel procedure up a level
This procedure needed to be pulled out of the section that was/is
called "Using an Iterative Development Process". The section on
how to deal with "dirty" kernel version strings is a procedure
in its own right. It is now up a level.
Scott Rifenbark [Tue, 26 Sep 2017 21:33:56 +0000 (14:33 -0700)]
kernel-dev: Updated kernel configuration section
A lot of rewriting here in this section to get it up to speed.
Also, moved that final section on determining hardware and
non-hardware features into an appendix where it belonged.
Currently systemd-boot actually incorporates libgcc, since the
systemd-boot needs to be built with 64bit instructions it can not
use the x32 based libgcc.
Use the new override to ensure it gets overriden, linux-gnux32 could
not be used because x86-64 has higher priority.
This is needed as an x32 more generic x32 override later in the
OVERRIDES, currently linux-gnux32 is the first override, but we
need a stronger (later in the list) x32 override to deal with some
needed x32 dependency overrides.
With default --without-nghttp2 flag set there was no way to get
http2 protocol support using nghttp2 library. Instead moved it to
PACKAGECONFIG options
selftest/cases/runtime_test: ignore removal errors when cleaning temporary gpg directory
The high-level method tempfile.TemporaryDirectory give us no way to ignore erros on
removal thus use tempfile.mkdtemp instead. Ignoring possible issues on removal
is neccesary because it contains gpg sockets that are automatically removed by
the system once the process terminates, otherwise the following log is observed:
File "/usr/lib/python3.5/shutil.py", line 436, in _rmtree_safe_fd
os.unlink(name, dir_fd=topfd)
FileNotFoundError: [Errno 2] No such file or directory: 'S.gpg-agent.browser'
Newer versions of gpg (at least 2.1.5 and 2.2.1) have issues when signing occurs in parallel
so (unfortunately) the signing must be done serially. Once the upstream problem is fixed,
this patch must be reverted, otherwise we loose all the intrinsic parallelism from
bitbake.
Ross Burton [Mon, 25 Sep 2017 20:21:55 +0000 (21:21 +0100)]
core-image-sato-sdk-ptest: reduce size
This image is very large and is skirting the maximum size of hddimg images (4GB,
as they're embedded inside FAT partitions). Making the image 10MB bigger can be
enough to cause the build to fail. This image is also used by QA so currently
we need to keep it working.
The default values for expanding an image to give it usable space are quite
generous, (3GB rootfs * 1.3 gives 1GB of empty space), so change the overhead
multiplier to 1.0x and explicitly request just 0.5GB of empty space in the
images.
This should give us a bit more breathing room until we can either remove hddimg
from the default build, or make this image dramatically smaller.
Create an option to wic doesn't change fstab file, the final
fstab file will be same that in rootfs and wic doesn't update
file, e.g adding a new mount point.
Users can control the fstab file content in base-files recipe.
This is useful if you want to only create an partition but not
add fstab mount point or add new mount point using label e.g:
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matt Madison [Sat, 23 Sep 2017 00:58:20 +0000 (17:58 -0700)]
goarch.bbclass: fixups for Go mips32 support
* Fix the regular expression in the mips test
* Flag as incompatible any mips32 tunes for n32 ABI
or soft-float, as go does not support them.
* Replace mips32r2 tune with mips32r1. Go only supports
mips32r1, which is a strict subset of r2. Adjusting
this tune is not ideal, but is hopefully a temporary
measure until more complete mips32 ISA coverage
arrives upstream.
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Agner [Wed, 13 Sep 2017 23:05:49 +0000 (16:05 -0700)]
linux-firmware: bump to latest linux-firmware git revision
This requires MD5 sum updates for
- LICENSE.QualcommAtheros_ath10k: year change
- WHENCE: various version updates and addition of new firmwares
The new firmware for Qualcom Venus causes a QA error:
QA Issue: linux-firmware: Recipe inherits the allarch class, but has packaged architecture-specific binaries
Since firmware typically do not run on the CPU, the architecture of
the firmware file is independent from the CPU architecture the image
will be running on. Disable the QA check for the linux-firmware
package by default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemurunner: print tail qemu log in case bootlog is empty
There are cases where the 'while loop' waiting for login prompt fails
and the bootlog variable does not get populated, thus use the the new
qemurunner member (self.msg) which stores all output coming from the qemu
process.
Paul Eggleton [Mon, 25 Sep 2017 11:23:35 +0000 (00:23 +1300)]
classes: drop image dependencies on TOPDIR variable
We don't need a dependency on this variable changing, and having one
causes locked signature warnings during eSDK installation if you have
INITRAMFS_IMAGE_* set (since TOPDIR will always be different between
the eSDK and the environment in which it was built).
bitbake: bitbake: lib/bb/utils: fix movefile() copy to dir fallback
When the destination is a directory, building the the destination file
path is always needed. That's because even if the copy fallback is
taken, it's always followed by a rename.
We were seeing cases where we could hit the 5s timeout on large/fast machines
running many different tasks at once. Increase this to 30s since the main
connection timeout path should no longer hit this slow path.
André Draszik [Fri, 22 Sep 2017 09:00:10 +0000 (10:00 +0100)]
useradd-staticids: don't create username-group if gid is specified
Adding distcc to an image, and having staticids enabled,
doesn't work as it causes a a superfluous 'distcc' group
being added using a conflicting GID, thus failing the
build:
| ERROR: distcc-3.2-r0 do_prepare_recipe_sysroot: distcc: groupadd command did not succeed.
Compared to other recipes, the distcc recipe only
specifies --gid for the primary group, and doesn't specify
--no-user-group, but when --gid is given, it doesn't make
sense to create a matching username-group in addition,
even if --no-user-group was not specified, and 'useradd'
actually complains if --gid and --user-group are given
both.
If only --gid is given, the current code in here
effectively behaves as if --user-group was specified,
taking the group-id of the username-group from the
--gid parameter. This causes the error above, as we try
to add a new group (distcc) with an existing group-id
(nogroup).
This is contrary to the comment in this file just above,
contrary to what useradd can do, contrary to behaviour
without the useradd-staticids bbclass, and non-intuitive.
Change the code such that a username-group is only created
- if a primary group using --gid was not specified, or
- if --no-user-group was not specified
To be in line with useradd, if gid is not given, and
--no-user-group is given, we add the user to the group
'users', which mimics useradd's behaviour.
Richard Purdie [Thu, 21 Sep 2017 22:19:10 +0000 (23:19 +0100)]
staging: Reduce verbosity of log messages
The staging changes were very verbose in their logging and whilst this is useful
when staging issues occur, those thankfully seem rare now and we can tune down
the logging to a sane level. This improves the readability of error messages from
functions that fail.
The code is still verbose when its replacing things in the sysroot.
Richard Purdie [Fri, 22 Sep 2017 11:39:33 +0000 (12:39 +0100)]
pseudo: Add fastop reply fix
This changes the pseudo FASTOP functionality so that a reply to the
operation is required. This means we then cannot lose data if a connection
is closed. This in turn stops corruption if we run out of file handles
and have to close connections.
This tweaks the connection closure patch to update the comment there which
is now outdated.
The idea came up here:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=11309
and here:
http://lists.openembedded.org/pipermail/openembedded-core/2017-August/141491.html
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This causes circular dependencies when UBOOT_SIGN_ENABLE is active.
These are usually caused by circular dependencies and any circular dependency chains found will be printed below. Increase the debug level to see a list of unbuildable tasks.
Identifying dependency loops (this may take a short while)...
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 21 Sep 2017 13:58:33 +0000 (10:58 -0300)]
kernel-devicetree.bbclass: Add support to generate append to kernel
The are use cases where the Device Tree appended to the kernel is
convinient, so we generate the bundle concatenating the kernel (and
potentionally the initramfs) and the Device Tree binaries.
To enable it, set KERNEL_DEVICETREE_BUNDLE variable to '1'
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Li Zhou [Thu, 21 Sep 2017 02:16:18 +0000 (10:16 +0800)]
xf86-video-intel: use uxa to replace sna as the default acceleration mode
The sna mode causes screen distortion issue on board MinnowMAX
described in this link:
https://bugs.freedesktop.org/show_bug.cgi?id=100700
The uxa mode is verified to not have above issue.
uxa is more stable and has more releases than sna.
So use uxa to replace sna as the default acceleration mode.
Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
André Draszik [Wed, 20 Sep 2017 09:41:56 +0000 (10:41 +0100)]
kernel-uboot: support compressed kernel on MIPS
MIPS generates vmlinuz.bin when compression in the kernel build is
enabled, including any necessary objcopy so we can leverage that
and skip our manual invocation of objcopy here. We just have to
put the file into the right place for the rest of the build to
find it.
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
André Draszik [Wed, 20 Sep 2017 09:41:53 +0000 (10:41 +0100)]
kernel-fitimage: sanitize dtb section name (unbreak MIPS)
We can't build fitImages for MIPS any more:
| Error: fit-image.its:21.27-28 syntax error
| FATAL ERROR: Unable to parse input tree
| uboot-mkimage: Can't read arch/mips/boot/fitImage.tmp: Invalid argument
Since commit cd2ed7f80b555add07795cc0cbaee866e6c193a3
("kernel-fitimage: dtb sections named by their filenames
and one config section for each dtb"), commit 1ec405ef5df82884c8997878bbe6c66d924b5127 in yocto, dtb
sections are named by the DTB filename, but the filename
can legally be in a subdirectory below
arch/$arch/boot/dts/, and on MIPS all DTBs are actually
in a subdirectory.
If so, mkimage fails with the above error message.
Unbreak this by replacing the offending character
(directory separator /)
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set RCONFLICTS to disallow multiple syslog daemon providers to be installed
on the target, and remove codes that deal with such situation.
Also, set ALTERNATIVE_PRIORITY back to 100. It was set to '10' in case of
systemd because sysklogd didn't have systemd support. For now, if we disallow
multiple syslog daemons to be installed, and it stays '10', then if sysklogd
is installed on target, the /sbin/syslogd would link to /bin/busybox.nosuid,
causing sysklogd service files using busybox's utility.
Set RCONFLICTS to disallow multiple syslog daemon providers to be installed
on the target at the same time, and remove codes which dealt with such
situation.
Supporting multiple syslog daemons on the same image doesn't have much sense.
rsyslog and syslog-ng in meta-oe have set RCONFLICTS to disallow this. And
we do the same for busybox.
Also, remove the line of creating a meaningless symlink of
/lib/systemd/syslog.service to /dev/null.
106b59d9 broke SSH host key generation when systemd and a read-only root file
system are in use because there isn't a way for systemd to get the optional
weak assigment of SYSCONFDIR from /etc/default/sshd and still provide a default
value if it is not specified. Instead, move the logic for determining if keys
need to be created to a helper script that both the SysV init script and the
systemd unit file can reference.
This does mean that the systemd unit file can't check for file existence to
know if it should start the service, but it wasn't able to do that correctly
anyway anymore. This should be a problem since the serivce is only run once per
power cycle by systemd, and should exit quickly if the keys already exist
wic: allow multiple /boot partitions with different content
It can be useful to have multiple partitions with '--source bootimg-partition'
but different content.
E.g. for TI AM335x, one boot partition can contain an first stage
bootloader ("MLO"), while the real bootloader and kernel plus devicetree
are in another one.
Patch allows to specify multiple IMAGE_BOOT_FILES with optional "_label-XXX"
or "_uuid-XXX" overrides.
E.g. with this patch, a .wks file with
| part --source bootimg-partition ... --label=mlo --active
| part --source bootimg-partition ... --label=boot0
| part --source bootimg-partition ... --label=boot1
Scott Rifenbark [Fri, 22 Sep 2017 15:31:50 +0000 (08:31 -0700)]
dev-manual, ref-manual: Image format implementation changes
Recently a number of changes have happened on the implementation
side of some image formats, and a few have been renamed.
The u-boot image signing code is now always available and no
longer in a stand-alone file. The vmdk/mdi/qcow2 images have
been removed and are now just a conversion type that is applied
to wic images.
Scott Rifenbark [Thu, 21 Sep 2017 20:15:21 +0000 (13:15 -0700)]
dev-manual: Replaced release names and numbers with variables
In several examples, hardcoded versions of release names and
versions were being used. I updated to use variables from
poky.ent so that examples would use most recent release.
Scott Rifenbark [Thu, 21 Sep 2017 16:36:46 +0000 (09:36 -0700)]
documentation: Purged "oe-init-build-env-memres" from docs
Fixes [YOCTO #11968]
Purged all occurrences of the "oe-init-build-env-memres" script
from the YP documentation set. Occurrences in a lot of places.
The BBSERVER variable was also impacted and had to have the
definition updated.
Scott Rifenbark [Wed, 20 Sep 2017 23:54:28 +0000 (16:54 -0700)]
ref-manual: Added "N" category to glossary
Discovered this item in the front of the glossary was commented
out and not showing up so the user did not have the option to
click on "N" to quickly get to the "N" entries, which did exist
and show up. Uncommented it and put the proper beginning "N"
variable in as the start.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yi Zhao [Thu, 21 Sep 2017 00:34:36 +0000 (08:34 +0800)]
qemu: remove unused patches
Remove the following patches since they are unused after qemu update to
2.10:
0001-replace-struct-ucontext-with-ucontext_t-type.patch
CVE-2016-9908.patch
CVE-2016-9912.patch
configure-fix-Darwin-target-detection.patch
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yi Zhao [Thu, 21 Sep 2017 03:18:31 +0000 (11:18 +0800)]
ptest-runner: fix segfault with -t option
The ptest-runner would segfault with -t option:
root@qemux86-64:~# ptest-runner -d /usr/lib test_pkg -t 5
[ 237.234112] ptest-runner[810]: segfault at 0 ip 000000382e638060 sp 00007fff9130f400 error 4 in libc-2.26.so[382e600000+1a7000]
It is safe to bump SRCREV to latest upstream commit to fix this issue
because there is only one commit since the last update:
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
core-image-tiny-initramfs: Enable running poky-tiny on qemux86-64
Building poky-tiny for x86-64 seems fine, but when executing qemu
it complains during boot time about not being able to execute init:
[ 5.409730] Failed to execute /init (error -8)
And then it drops to a login prompt (which it should't do on tiny)
This is supposed to be complaining about init's format, it only happens
on x86-64 architectures so perhaps is a 32/64 bit issue, but since
core-image-tiny-initramfs does not actually provide a traditional init,
the script is simply meant to drop to shell, we can workaround the issue
by specifying the kernel to run the init script via busybox's sh,
dropping to shell correctly on x86-64 leaving x86 unaffected.
Yi Zhao [Thu, 21 Sep 2017 07:54:58 +0000 (15:54 +0800)]
ltp: fix hanging issue for gdb01 case
If gdb01 testcase runs as background process, gdb can receive SIGTTOU
and then the case gets stuck. Replace stdin with /dev/null to fix this
issue. The patch is backported from upstream.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta/lib/oe/rootfs.py: clean up dnf cache after creating an image
It contains cached metadata for a transient repository that is used
only when creating images on the host, and so is of no use on target
images. Dnf will recreate the cache on target when needed.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 20 Sep 2017 12:57:33 +0000 (13:57 +0100)]
sanity: check that path variables don't use ~
The core path variables (TMPDIR, DL_DIR, SSTATE_DIR) don't use tilde expansion
but if the user does then the errors are very mysterious, so check on startup.
Paul Eggleton [Tue, 19 Sep 2017 03:57:07 +0000 (15:57 +1200)]
scripts: rename yocto-compat-layer to remove "compatible" nomenclature
"Yocto Project Compatible" [1] is a programme which requires you meet
specific criteria including going through an application process - it is
not sufficient simply to run the script we have created here and have it
produce no warnings/errors. To avoid people being confused by the fact
that this script uses the term "compatible" or variations thereof,
substitute usage of that word with "check" instead. The functionality of
the script is unchanged.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an illegal address access in the function dump_uses() in progs/dump_entry.c
in ncurses 6.0 that might lead to a remote denial of service attack.
There is an illegal address access in the _nc_safe_strcat function in
strings.c in ncurses 6.0 that will lead to a remote denial of service attack.
There is an illegal address access in the function _nc_read_entry_source()
in progs/tic.c in ncurses 6.0 that might lead to a remote denial of service attack.
There is an illegal address access in the _nc_save_str function in
alloc_entry.c in ncurses 6.0. It will lead to a remote denial of service attack.
There is an infinite loop in the next_char function in comp_scan.c in
ncurses 6.0, related to libtic. A crafted input will lead to a remote denial of service attack.
There is an illegal address access in the function postprocess_termcap()
in parse_entry.c in ncurses 6.0 that will lead to a remote denial of service attack.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
