build_compression_ctxt() is currently unreachable due to
conn.compress_algorithm remaining zero (SMB3_COMPRESS_NONE).
It appears to have been broken in a couple of subtle ways over the
years:
- prior to d6c9ad23b421 ("ksmbd: use the common definitions for
NEGOTIATE_PROTOCOL") smb2_compression_ctx.DataLength was set to 8,
which didn't account for the single CompressionAlgorithms flexible
array member.
- post d6c9ad23b421 smb2_compression_capabilities_context
CompressionAlgorithms is a three member array, while
CompressionAlgorithmCount is set to indicate only one member.
assemble_neg_contexts() ctxt_size is also incorrectly incremented by
sizeof(struct smb2_compression_capabilities_context) + 2, which
assumes one flexible array member.
Signed-off-by: David Disseldorp <ddiss@suse.de> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both pneg_ctxt and ctxt_size change in unison, with each adding the
length of the previously added context, rounded up to an eight byte
boundary.
Drop pneg_ctxt increments and instead use the ctxt_size offset when
passing output pointers to per-context helper functions. This slightly
simplifies offset tracking and shaves off a few text bytes.
Before (x86-64 gcc 7.5):
text data bss dec hex filename
213234 8677 672 222583 36577 ksmbd.ko
After:
text data bss dec hex filename
213218 8677 672 222567 36567 ksmbd.ko
Signed-off-by: David Disseldorp <ddiss@suse.de> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When smb2_lock request is canceled by smb2_cancel or smb2_close(),
ksmbd is missing deleting async_request_entry async_requests list.
Because calling init_smb2_rsp_hdr() in smb2_lock() mark ->synchronous
as true and then it will not be deleted in
ksmbd_conn_try_dequeue_request(). This patch add release_async_work() to
release the ones allocated for async work.
Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang with W=1 reports
fs/ksmbd/unicode.c:122:19: error: unused function
'is_char_allowed' [-Werror,-Wunused-function]
static inline int is_char_allowed(char *ch)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix indentation of server config options, and also since
support for very old, less secure, NTLM authentication was removed
(and quite a while ago), remove the mention of that in Kconfig, but
do note Kerberos (not just NTLMv2) which are supported and much
more secure.
Acked-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ksmbd seems to be trying to use a cmd value of 0 when unlocking a file.
That activity requires a type of F_UNLCK with a cmd of F_SETLK. For
local POSIX locking, it doesn't matter much since vfs_lock_file ignores
@cmd, but filesystems that define their own ->lock operation expect to
see it set sanely.
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, SMB2_SESSION_FLAG_ENCRYPT_DATA is always set session setup
response. Since this forces data encryption from the client, there is a
problem that data is always encrypted regardless of the use of the cifs
seal mount option. SMB2_SESSION_FLAG_ENCRYPT_DATA should be set according
to KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION flags, and in case of
KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION_OFF, encryption mode is turned off for
all connections.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
members in multiple structs in fs/ksmbd/smb_common.h and one in
fs/ksmbd/smb2pdu.h.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Léo Lam [Sat, 16 Dec 2023 05:47:17 +0000 (05:47 +0000)]
wifi: nl80211: fix deadlock in nl80211_set_cqm_rssi (6.6.x)
Commit 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use"
backported to 6.6.x) causes nl80211_set_cqm_rssi not to release the
wdev lock in some of the error paths.
Of course, the ensuing deadlock causes userland network managers to
break pretty badly, and on typical systems this also causes lockups on
on suspend, poweroff and reboot. See [1], [2], [3] for example reports.
The upstream commit 7e7efdda6adb ("wifi: cfg80211: fix CQM for non-range
use"), committed in November 2023, is completely fine because there was
another commit in August 2023 that removed the wdev lock:
see commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex").
The reason things broke in 6.6.5 is that commit 4338058f6009 was applied
without also applying 076fc8775daf.
Commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") is a rather
large commit; adjusting the error handling (which is what this commit does)
yields a much simpler patch and was tested to work properly.
Fix the deadlock by releasing the lock before returning.
[note: this is commit 4a7e92551618f3737b305f62451353ee05662f57 reapplied;
that commit had been reverted in 6.6.6 because it caused regressions, see
https://lore.kernel.org/stable/2023121450-habitual-transpose-68a1@gregkh/
for details]
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent. Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.
Trouble arises when the submount's parent is evicted despite the
submount itself being in use. In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation. When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.
Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount. When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.
The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn(). However, commit 0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().
As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start(). Especially the skipped reset
of ->kdamond could cause a use-after-free.
Fix it by waiting for start of kdamond_fn() execution from
damon_start().
Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Jakub Acs <acsjakub@amazon.de> Cc: Changbin Du <changbin.du@intel.com> Cc: Jakub Acs <acsjakub@amazon.de> Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That's not really correct because the synchronization should happen before
interrupts are re-enabled to ensure that a pending interrupt observes the
complete update of the opcodes.
It's not entirely clear whether the interrupt entry provides enough
serialization already, but moving the sync_core() invocation into interrupt
disabled region does no harm and is obviously correct.
Fixes: 6fffacb30349 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When failing to create a vcpu because (for example) it has a
duplicate vcpu_id, we destroy the vcpu. Amusingly, this leaves
the redistributor registered with the KVM_MMIO bus.
This is no good, and we should properly clean the mess. Force
a teardown of the vgic vcpu interface, including the RD device
before returning to the caller.
As we are going to need to call into kvm_vgic_vcpu_destroy() without
prior holding of the slots_lock, introduce __kvm_vgic_vcpu_destroy()
as a non-locking primitive of kvm_vgic_vcpu_destroy().
When destroying a vgic, we have rather cumbersome rules about
when slots_lock and config_lock are held, resulting in fun
buglets.
The first port of call is to simplify kvm_vgic_map_resources()
so that there is only one call to kvm_vgic_destroy() instead of
two, with the second only holding half of the locks.
For that, we kill the non-locking primitive and move the call
outside of the locking altogether. This doesn't change anything
(we re-acquire the locks and teardown the whole vgic), and
simplifies the code significantly.
The dentry returned by debugfs_lookup() needs to be released by calling
dput() which is missing in margining_port_remove(). Fix this by calling
debugfs_lookup_and_remove() that combines both and avoids the memory leak.
Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A refcount issue can appeared in __fwnode_link_del() due to the
pr_debug() call:
WARNING: CPU: 0 PID: 901 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
Call Trace:
<TASK>
...
of_node_get+0x1e/0x30
of_fwnode_get+0x28/0x40
fwnode_full_name_string+0x34/0x90
fwnode_string+0xdb/0x140
...
vsnprintf+0x17b/0x630
...
__fwnode_link_del+0x25/0xa0
fwnode_links_purge+0x39/0xb0
of_node_release+0xd9/0x180
...
Indeed, an fwnode (of_node) is being destroyed and so, of_node_release()
is called because the of_node refcount reached 0.
From of_node_release() several function calls are done and lead to
a pr_debug() calls with %pfwf to print the fwnode full name.
The issue is not present if we change %pfwf to %pfwP.
To print the full name, %pfwf iterates over the current node and its
parents and obtain/drop a reference to all nodes involved.
In order to allow to print the full name (%pfwf) of a node while it is
being destroyed, do not obtain/drop a reference to this current node.
Fixes: a92eb7621b9f ("lib/vsprintf: Make use of fwnode API to obtain node names and separators") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20231114152655.409331-1-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.
This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.
Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.
Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block") Cc: stable@kernel.org Co-developed-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.
Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.
Let's also add some comments while at it.
Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset") Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.
Ignore disabled pin configuration nodes in device tree.
__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.
Fix this bug by making a copy of "bv" and changing the copy instead.
The synth_event_gen_test module can be built in, if someone wants to run
the tests at boot up and not have to load them.
The synth_event_gen_test_init() function creates and enables the synthetic
events and runs its tests.
The synth_event_gen_test_exit() disables the events it created and
destroys the events.
If the module is builtin, the events are never disabled. The issue is, the
events should be disable after the tests are run. This could be an issue
if the rest of the boot up tests are enabled, as they expect the events to
be in a known state before testing. That known state happens to be
disabled.
When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y
a warning will trigger:
This is because the synth_event_gen_test_init() left the synthetic events
that it created enabled. By having it disable them after testing, the
other selftests will run fine.
Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Alexander Graf <graf@amazon.com> Tested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8930a6c20791 ("scsi: core: add support for request batching") the
block layer bd->last flag was mapped to SCMD_LAST and used as an indicator
to send the batch for the drivers that implement this feature. However, the
error handling code was not updated accordingly.
scsi_send_eh_cmnd() is used to send error handling commands and request
sense. The problem is that request sense comes as a single command that
gets into the batch queue and times out. As a result the device goes
offline after several failed resets. This was observed on virtio_scsi
during a device resize operation.
To fix this always set SCMD_LAST flag in scsi_send_eh_cmnd() and
scsi_reset_ioctl().
Fixes: 8930a6c20791 ("scsi: core: add support for request batching") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Link: https://lore.kernel.org/r/20231215121008.2881653-1-alexander.atanasov@virtuozzo.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several reports have been made indicating that this commit caused
hangs. Numerous attempts at root causing and fixing the issue have
been unsuccessful so let's revert for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217599 Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):
In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.
The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.
Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
ublk_cancel_dev() just calls ublk_cancel_queue() to cancel all pending
io commands after ublk request queue is idle. The only protection is just
the read & write of ubq->nr_io_ready and avoid duplicated command cancel,
so add one per-queue lock with cancel flag for providing this protection,
meantime move ublk_cancel_dev() out of ub->mutex.
Then we needn't to call io_uring_cmd_complete_in_task() to cancel
pending command. And the same cancel logic will be re-used for
cancelable uring command.
Now that we switched to write time activation, we no longer need to (and
must not) count the fresh region as zone unusable. This commit is similar
to revert of commit fa2068d7e922b434eb ("btrfs: zoned: count fresh BG
region as zone unusable").
As described in commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata"), ABBA deadlocks will be
triggered because shrinker_rwsem currently needs to held by
dm_pool_abort_metadata() as a side-effect of thin-pool metadata
operation failure.
The following three problem scenarios have been noticed:
1) Described by commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata")
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit 85c50197716c ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before 85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After 85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes: 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to
userspace slow-path") renamed the do_notify_resume function to
do_work_pending but did not change the prototype in signal.h
Do that now, as the original function does not exist anymore.
Fixes: b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to userspace slow-path") Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230118142252.337103-1-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size. It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.
The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.
To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.
mount -t 9p -o trans=virtio <mount_tag> <mount_path>
The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.
A small CIFS buffer (448 bytes) isn't big enough to hold
SMB2_QUERY_INFO request along with user's input data from
CIFS_QUERY_INFO ioctl. That is, if the user passed an input buffer >
344 bytes, the client will memcpy() off the end of @req->Buffer in
SMB2_query_info_init() thus causing the following KASAN splat:
BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs]
Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240
Fix this by increasing size of SMB2_QUERY_INFO request buffers and
validating input length to prevent other callers from overflowing @req
in SMB2_query_info_init() as well.
Fixes: f5b05d622a3e ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate SMB message with ->check_message() before calling
->calc_smb_size().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate next header's offset in ->next_header() so that it isn't
smaller than MID_HEADER_SIZE(server) and then standard_receive3() or
->receive() ends up writing off the end of the buffer because
'pdu_length - MID_HEADER_SIZE(server)' wraps up to a huge length:
BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0x4fc/0x840
Write of size 701 at addr ffff88800caf407f by task cifsd/1090
There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.
The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.
The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.
In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.
Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.
Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.
This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.
I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2f9 ("9p: add new protocol support code") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.
cc: <stable@vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()
The btmon log below shows the case that lacks enc key size check.
> ACL Data RX: Handle 1 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 3 len 4
PSM: 25 (0x0019)
Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection pending (0x0001)
Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Count: 1
#35: len 16 (25 Kb/s)
Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
Cc: stable@vger.kernel.org Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As announced [1][2], I have taken over maintainership of the
wireless-regdb project.
Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.
This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.
This flash drive reports write protect during the first mode sense.
In the past this was not an issue as the kernel called revalidate twice,
thus asking the device for its write protect status twice, with write
protect being disabled in the second mode sense.
However, since commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") that is no longer the case, thus the
device shows up read only.
[490891.289495] sd 12:0:0:0: [sdl] Write Protect is on
[490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08
This does not appear to be a timing issue, as enabling the usbcore quirk
USB_QUIRK_DELAY_INIT has no effect on write protect.
Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") Cc: stable <stable@kernel.org> Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes: 01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20221114110626.526643-1-weiyongjun@huaweicloud.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com> Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, if provider->xlate() or provider->xlate_extended()
"successfully" return a NULL node, then of_icc_get_from_provider() won't
consider that an error and will successfully return the NULL node. This
bypasses error handling in of_icc_get_by_index() and leads to NULL
dereferences in path_find().
This could be avoided by ensuring provider callbacks always return an
error for NULL nodes, but it's better to explicitly protect against this
in the common framework.
Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20231025145829.11603-1-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 01a39f1c4f1220a4e6a25729fae87ff5794cbc52) Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add support for remapping CCS FBs on MTL to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
Stable-dep-of: 324b70e997aa ("drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original") Signed-off-by: Sasha Levin <sashal@kernel.org>
If we want to test with DPT disabled on ADL the POT stride remap
stuff needs to be disabled. Make it depend on actual DPT usage
instead of just assuming it based on the modifier.
Since the plane_state variable is declared outside the scaler_users
loop in intel_atomic_setup_scalers(), and it's never reset back to
NULL inside the loop we may end up calling intel_atomic_setup_scaler()
with a non-NULL plane state for the pipe scaling case. That is bad
because intel_atomic_setup_scaler() determines whether we are doing
plane scaling or pipe scaling based on plane_state!=NULL. The end
result is that we may miscalculate the scaler mode for pipe scaling.
The hardware becomes somewhat upset if we end up in this situation
when scanning out a planar format on a SDR plane. We end up
programming the pipe scaler into planar mode as well, and the
result is a screenfull of garbage.
Fix the situation by making sure we pass the correct plane_state==NULL
when calculating the scaler mode for pipe scaling.
In newer hardware versions (i.e. display version >= 14), the second
scaler doesn't support vertical scaling.
The current implementation of the scaling limits is simplified and
only occurs when the planes are created, so we don't know which scaler
is being used.
In order to handle separate scaling limits for horizontal and vertical
scaling, and different limits per scaler, split the checks in two
phases. We first do a simple check during plane creation and use the
best-case scenario (because we don't know the scaler that may be used
at a later point) and then do a more specific check when the scalers
are actually being set up.
the nvme_handle_cqe() interrupt handler calls nvme_complete_async_event()
but the latter may call nvme_auth_stop() which is a blocking function.
Sleeping functions can't be called in interrupt context
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(bdbbae241a04), so add protection for that.
Fixes: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space") Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004005a0ae800000001005a0ae80000000400000001
3fc0: 00000004005a0ae8000000010000000400000004b6c616c0000000200059d190
3fe0: 00000004b6c61678aec5a041aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver") Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the afs dynamic root directory, the ->lookup() function does a DNS check
on the cell being asked for and if the DNS upcall reports an error it will
report an error back to userspace (typically ENOENT).
However, if a failed DNS upcall returns a new-style result, it will return
a valid result, with the status field set appropriately to indicate the
type of failure - and in that case, dns_query() doesn't return an error and
we let stat() complete with no error - which can cause confusion in
userspace as subsequent calls that trigger d_automount then fail with
ENOENT.
Fix this by checking the status result from a valid dns_query() and
returning an error if it indicates a failure.
Fixes: bbb4c4323a4d ("dns: Allow the dns resolver to retrieve a server set") Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the afs dynamic root's d_delete function to always delete unused
dentries rather than only deleting them if they're positive. With things
as they stand upstream, negative dentries stemming from failed DNS lookups
stick around preventing retries.
Fixes: 66c7e1d319a5 ("afs: Split the dynroot stuff out and give it its own ops tables") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes") Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes: 92d4abd66f70 ("Bluetooth: vhci: Fix race when opening vhci device") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
