The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.
See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.
Reported-by: Jan Palus <jpalus@fastmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Palus <jpalus@fastmail.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 4388c9b3a6ee ("powerpc: Do not send system reset request
through the oops path"), pstore dmesg file is not updated when dump is
triggered from HMC. This commit modified system reset (sreset) handler
to invoke fadump or kdump (if configured), without pushing dmesg to
pstore. This leaves pstore to have old dmesg data which won't be much
of a help if kdump fails to capture the dump. This patch fixes that by
calling kmsg_dump() before heading to fadump ot kdump.
Fixes: 4388c9b3a6ee ("powerpc: Do not send system reset request through the oops path") Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904075949.15607-1-ganeshgr@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When registering the PLL, unbypass the PLL.
The PLL has two bypass control bit, BYPASS and EXT_BYPASS.
we will expose EXT_BYPASS to clk driver for mux usage, and keep
BYPASS inside pll14xx usage. The PLL has a restriction that
when M/P change, need to RESET/BYPASS pll to avoid glitch, so
we could not expose BYPASS.
To make it easy for clk driver usage, unbypass PLL which does
not hurt current function.
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to PLL1443XA and PLL1416X spec,
"When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to
output unstable clock until lock time passes. PLL1416X/PLL1443XA may
generate a glitch at FOUT."
So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch.
In the end of set rate, BYPASS will be cleared.
When prepare clock, also need to take care to avoid glitch. So
we also follow Spec to set BYPASS before RESETB changed from 0 to 1.
And add a check if the RESETB is already 0, directly return 0;
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.
On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined
when CONFIG_OPTIMIZE_INLINING is set.
Clang then fails a compile-time assertion, because it cannot tell at
compile time what the size of the argument is:
mm/memcontrol.o: In function `__cmpxchg_mb':
memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175'
memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175'
Mark all of the cmpxchg() style functions as __always_inline to
ensure that the compiler can see the result.
Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/648 Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Tested-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.
In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.
prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:
* Dropped IPIs in the time immediately after a cpu comes
online (before it has installed the cpuidle handler), making the
online operation block indefinitely waiting for the new cpu to
respond.
* Hitting this WARN_ON in arch_local_irq_restore():
/*
* We should already be hard disabled here. We had bugs
* where that wasn't the case so let's dbl check it and
* warn if we are wrong. Only do that when IRQ tracing
* is enabled as mfmsr() can be costly.
*/
if (WARN_ON_ONCE(mfmsr() & MSR_EE))
__hard_irq_disable();
Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.
Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.
Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Reported-by: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the last device in an eeh_pe is removed the eeh_pe structure itself
(and any empty parents) are freed since they are no longer needed. This
results in a crash when a hotplug driver is involved since the following
may occur:
1. Device is suprise removed.
2. Driver performs an MMIO, which fails and queues and eeh_event.
3. Hotplug driver receives a hotplug interrupt and removes any
pci_devs that were under the slot.
4. pci_dev is torn down and the eeh_pe is freed.
5. The EEH event handler thread processes the eeh_event and crashes
since the eeh_pe pointer in the eeh_event structure is no
longer valid.
Crashing is generally considered poor form. Instead of doing that use
the fact PEs are marked as EEH_PE_INVALID to keep them around until the
end of the recovery cycle, at which point we can safely prune any empty
PEs.
Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.
The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.
Restore the CFAR to the saved value before running the late handler.
Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
TM test tm-unavailable must take into account aborts due to host aborting
a transactin because of a facility unavailable exception, just like it
already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED).
Reported-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1566341651-19747-1-git-send-email-gromero@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[Description]
port spdif fix to staging:
spdif hardwired to afmt inst 1.
spdif func pointer
spdif resource allocation (reserve last audio endpoint for spdif only)
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The CPG/MSSR Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down. Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.
Note that this only affects RZ/A2 SoCs. On R-Car Gen2 and Gen3 SoCs,
the R-Car SYSC driver handles Clock Domain creation, and offloads only
device attachment/detachment to the CPG/MSSR driver.
The CPG/MSTP Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down. Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.
This also gets rid of a boot warning when the Clock Domain contains an
IRQ-safe device, e.g. on RZ/A1:
sh_mtu2 fcff0000.timer: PM domain cpg_clocks will not be powered off
When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.
As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.
This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.
Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.
Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.
Some, mostly Fermi, vbioses appear to have zero max voltage. That causes Nouveau to not parse voltage entries, thus users not being able to set higher clocks.
When changing this value Nvidia driver still appeared to ignore it, and I wasn't able to find out why, thus the code is ignoring the value if it is zero.
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On Turing, an input LUT is required to transform inputs in fixed-point
formats to FP16 for the internal display pipe. We provide an identity
mapping whenever a window is enabled for this reason.
HW has error checks to ensure when the input is already FP16, that the
input LUT is also disabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable(). However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device. Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.
Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface") Signed-off-by: hexin <hexin15@baidu.com> Signed-off-by: Liu Qi <liuqi16@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.
However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).
To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.
Also clear the flag during eeh_handle_special_event(), for the same
reasons.
pmx_writel uses writel which inserts write barrier before the
register write.
This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.
After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.
There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.
create_physical_mapping expects physical addresses, but creating and
splitting these mappings after boot is supplying virtual (effective)
addresses. This can be irritated by booting with mem= to limit memory
then probing an unused physical memory range:
echo <addr> > /sys/devices/system/memory/probe
This mostly works by accident, firstly because __va(__va(x)) == __va(x)
so the virtual address does not get corrupted. Secondly because pfn_pte
masks out the upper bits of the pfn beyond the physical address limit,
so a pfn constructed with a 0xc000000000000000 virtual linear address
will be masked back to the correct physical address in the pte.
We see warnings such as:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
return oldval == cmparg;
^
kernel/futex.c:1651:6: note: 'oldval' was declared here
int oldval, ret;
^
This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.
Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.
This sets cpu 7 online in all respects except for the cpu's
corresponding struct device; dev->offline remains true.
3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
already online and returns success. The driver core (device_online)
sets dev->offline = false.
4. The migration completes and restores cpu 7 to offline state:
This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.
Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.
Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-8-sboyd@kernel.org Acked-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-4-sboyd@kernel.org Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org
[sboyd@kernel.org: Move name to after checking for error or NULL hw] Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.
This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.
As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.
To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.
This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.
While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.
========================================================
hardirqs last enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G W
softirqs last enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock: 0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
(fs_reclaim){+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
[Why]
The vm config will be clear to 0 when system enter S4. It will
cause hubbub didn't know how to fetch data when system resume.
The flip always pending because earliest_inuse_address and
request_address are different.
[How]
Reprogram VM config when system resume
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The math on deciding on how many
"frames to insert" sometimes sent us over the max refresh rate.
Also integer overflow can occur if we have high refresh rates.
[How]
Instead of clipping the frame duration such that it doesn’t go below the min,
just remove a frame from the number of frames to insert. +
Use unsigned long long for intermediate calculations to prevent
integer overflow.
Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
When endpoint is at the boundary of a region, such as at 2^0=1
we find that the last segment has a sharp slope and some points
are clipped at the top.
[How]
If end point is 1, which is exactly at the 2^0 region boundary, we
need to program an additional region beyond this point.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the definition of the p5020 chip, the p2041 chip's info was used
instead. The p5020 and p2041 chips have different info. This is most
likely a typo.
ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.
This was originally added so firmware updates through IPMI would
complete in a timely manner. But we can't kill the scheduler
locks for that one use case.
Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.
According to the following tab (coming from STMFX datasheet), updates
have to done in stmfx_pinconf_set function:
-"type" has to be set when "bias" is configured as "pull-up or pull-down"
-PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as
output. There is so no need to check direction.
DIR | TYPE | PUPD | MFX GPIO configuration
----|------|------|---------------------------------------------------
1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor
----|------|------|---------------------------------------------------
1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor
----|------|------|---------------------------------------------------
1 | 0 | 0/1 | OUTPUT push pull no pull
----|------|------|---------------------------------------------------
0 | 1 | 1 | INPUT with internal pull-up resistor
----|------|------|---------------------------------------------------
0 | 1 | 0 | INPUT with internal pull-down resistor
----|------|------|---------------------------------------------------
0 | 0 | 1 | INPUT floating
----|------|------|---------------------------------------------------
0 | 0 | 0 | analog (GPIO not used, default setting)
When building with -Wsometimes-uninitialized, clang warns:
drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
if (fndit)
^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
int j, fndit;
^
= 0
fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.
Fixes: 2fcf3ae508c2 ("hotplug/drc-info: Add code to search ibm,drc-info property") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/504 Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Initially, the TMU_ROOT clock was marked as critical, which automatically
made the AHB clock to stay always on. Since the TMU_ROOT clock is not
marked as critical anymore, following commit:
"clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOT"
all the clocks that derive from ipg_root clock (and implicitly ahb clock)
would also have to enable, along with their own gate, the AHB clock.
But considering that AHB is actually a bus that has to be always on, we mark
it as critical in the clock provider driver and then all the clocks that
derive from it can be controlled through the dedicated per IP gate which
follows after the ipg_root clock.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.
HW requires for caching to be unset for scanout BO
mappings when the BO placement is in GTT memory.
Usually the flag to unset is passed from user mode
but for FB mode this was missing.
v2:
Keep all BO placement logic in amdgpu_display_supported_domains
Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Shirish S <shirish.s@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run
Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run Signed-off-by: Sasha Levin <sashal@kernel.org>
The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port
Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.
To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The mipi_dbi helper is missing a dependency on DRM_KMS_HELPER and putting
that in revealed this problem:
drivers/video/fbdev/Kconfig:12:error: recursive dependency detected!
drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:75: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:69: symbol DRM_KMS_HELPER is selected by TINYDRM_MIPI_DBI
drivers/gpu/drm/tinydrm/Kconfig:11: symbol TINYDRM_MIPI_DBI is selected by TINYDRM_HX8357D
drivers/gpu/drm/tinydrm/Kconfig:15: symbol TINYDRM_HX8357D depends on BACKLIGHT_CLASS_DEVICE
drivers/video/backlight/Kconfig:144: symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT
drivers/video/fbdev/Kconfig:187: symbol FB_BACKLIGHT depends on FB
A symbol that selects DRM_KMS_HELPER can not depend on
BACKLIGHT_CLASS_DEVICE. The reason for this is that DRM_KMS_FB_HELPER
selects FB instead of depending on it.
The tinydrm drivers have somehow gotten away with depending on
BACKLIGHT_CLASS_DEVICE because DRM_TINYDRM selects DRM_KMS_HELPER and the
drivers depend on that symbol.
An audit shows that all DRM drivers that select DRM_KMS_HELPER and use
BACKLIGHT_CLASS_DEVICE, selects it:
DRM_TILCDC, DRM_GMA500, DRM_SHMOBILE, DRM_NOUVEAU, DRM_FSL_DCU,
DRM_I915, DRM_RADEON, DRM_AMDGPU, DRM_PARADE_PS8622
Documentation/kbuild/kconfig-language.txt has a note regarding select:
1. 'select should be used with care since it doesn't visit dependencies.'
This is not a problem since BACKLIGHT_CLASS_DEVICE doesn't have any
dependencies.
2. 'In general use select only for non-visible symbols'
BACKLIGHT_CLASS_DEVICE is user visible.
The real solution to this would be to have DRM_KMS_FB_HELPER depend on the
user visible symbol FB. That is a can of worms I'm not willing to tackle.
I fear that such a change will result in me handling difficult fallouts
for the next weeks. So I'm following DRM suite here.
The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.
Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode") Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Specifically to one panel,
TCON is able to accept active video signal quickly, but
the Source Driver requires 2-3 frames of extra time.
It is a Panel issue since TCON needs to take care of
all Sink requirements including Source Driver. But in
this case it does not.
Customer is asking to add fixed T7 delay as panel
workaround.
[How]
Add monitor specific patch to add T7 delay
Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The horizontal blanking periods are too short, as the values are
specified for a single LVDS channel. Since this panel is dual LVDS
they need to be doubled. With this change the panel reaches its
nominal vrefresh rate of 60Fps, instead of the 64Fps with the
current wrong blanking.
Philipp Zabel added:
The datasheet specifies 960 active clocks + 40/128/160 clocks blanking
on each of the two LVDS channels (min/typical/max), so doubled this is
now correct.
When vkms invoke drm_universal_plane_init(), it sets 0 for
possible_crtcs parameter which means that planes can't be attached to
any CRTC. It currently works due to some safeguard in the drm_crtc file;
however, it is possible to identify the problem by trying to append a
second connector. This patch fixes this issue by modifying
vkms_plane_init() to accept an index parameter which makes the code a
little bit more flexible and avoid set zero to possible_crtcs.
According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The issue we have is that the crc worker might fall behind. We've
tried to handle this by tracking both the earliest frame for which it
still needs to compute a crc, and the last one. Plus when the
crtc_state changes, we have a new work item, which are all run in
order due to the ordered workqueue we allocate for each vkms crtc.
Trouble is there's been a few small issues in the current code:
- we need to capture frame_end in the vblank hrtimer, not in the
worker. The worker might run much later, and then we generate a lot
of crc for which there's already a different worker queued up.
- frame number might be 0, so create a new crc_pending boolean to
track this without confusion.
- we need to atomically grab frame_start/end and clear it, so do that
all in one go. This is not going to create a new race, because if we
race with the hrtimer then our work will be re-run.
- only race that can happen is the following:
1. worker starts
2. hrtimer runs and updates frame_end
3. worker grabs frame_start/end, already reading the new frame_end,
and clears crc_pending
4. hrtimer calls queue_work()
5. worker completes
6. worker gets re-run, crc_pending is false
Explain this case a bit better by rewording the comment.
v2: Demote warning level output to debug when we fail to requeue, this
is expected under high load when the crc worker can't quite keep up.
The check in taprio_set_picos_per_byte is currently not robust enough
and will trigger this division by zero, due to e.g. PHYLINK not setting
kset->base.speed when there is no PHY connected:
[ 27.109992] Division by zero in kernel.
[ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212
[ 27.121974] Hardware name: Freescale LS1021A
[ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14)
[ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4)
[ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18)
[ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0)
[ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68)
[ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4)
[ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec)
[ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4)
[ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8)
[ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc)
[ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114)
[ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c)
[ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340)
[ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24)
[ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228)
[ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c)
[ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0)
[ 27.264546] 5fa0: b6f608c8000000f800000003bed7e2f00000000000000000
[ 27.272681] 5fc0: b6f608c8000000f8004ce54c000001285d3ce8c7000000000000002600505c9c
[ 27.280812] 5fe0: 00000070bed7e298004ddd64b6dd1e64
Russell King points out that the ethtool API says zero is a valid return
value of __ethtool_get_link_ksettings:
* If it is enabled then they are read-only; if the link
* is up they represent the negotiated link mode; if the link is down,
* the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
* @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
So, it seems that taprio is not following the API... I'd suggest either
fixing taprio, or getting agreement to change the ethtool API.
The chosen path was to fix taprio.
Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As explained in the "net: sched: taprio: Avoid division by zero on
invalid link speed" commit, it is legal for the ethtool API to return
zero as a link speed. So guard against it to ensure we don't perform a
division by zero in kernel.
Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because ptp_qoriq_settime is being called prior to spin_lock_init, the
following stack trace can be seen at driver probe time:
[ 2.269117] the code is fine but needs lockdep annotation.
[ 2.274569] turning off the locking correctness validator.
[ 2.280027] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc7-01478-g01eaa67a4797 #263
[ 2.288073] Hardware name: Freescale LS1021A
[ 2.292337] [<c0313cb4>] (unwind_backtrace) from [<c030e11c>] (show_stack+0x10/0x14)
[ 2.300045] [<c030e11c>] (show_stack) from [<c1219440>] (dump_stack+0xcc/0xf8)
[ 2.307235] [<c1219440>] (dump_stack) from [<c03b9b44>] (register_lock_class+0x730/0x73c)
[ 2.315372] [<c03b9b44>] (register_lock_class) from [<c03b6190>] (__lock_acquire+0x78/0x270c)
[ 2.323856] [<c03b6190>] (__lock_acquire) from [<c03b90cc>] (lock_acquire+0xe0/0x22c)
[ 2.331649] [<c03b90cc>] (lock_acquire) from [<c123c310>] (_raw_spin_lock_irqsave+0x54/0x68)
[ 2.340048] [<c123c310>] (_raw_spin_lock_irqsave) from [<c0e73fe4>] (ptp_qoriq_settime+0x38/0x80)
[ 2.348878] [<c0e73fe4>] (ptp_qoriq_settime) from [<c0e746d4>] (ptp_qoriq_init+0x1f8/0x484)
[ 2.357189] [<c0e746d4>] (ptp_qoriq_init) from [<c0e74aac>] (ptp_qoriq_probe+0xd0/0x184)
[ 2.365243] [<c0e74aac>] (ptp_qoriq_probe) from [<c0b0a07c>] (platform_drv_probe+0x48/0x9c)
[ 2.373555] [<c0b0a07c>] (platform_drv_probe) from [<c0b07a14>] (really_probe+0x1c4/0x400)
[ 2.381779] [<c0b07a14>] (really_probe) from [<c0b07e28>] (driver_probe_device+0x78/0x1b8)
[ 2.390003] [<c0b07e28>] (driver_probe_device) from [<c0b081d0>] (device_driver_attach+0x58/0x60)
[ 2.398832] [<c0b081d0>] (device_driver_attach) from [<c0b082d4>] (__driver_attach+0xfc/0x160)
[ 2.407402] [<c0b082d4>] (__driver_attach) from [<c0b05a84>] (bus_for_each_dev+0x68/0xb4)
[ 2.415539] [<c0b05a84>] (bus_for_each_dev) from [<c0b06b68>] (bus_add_driver+0x104/0x20c)
[ 2.423763] [<c0b06b68>] (bus_add_driver) from [<c0b0909c>] (driver_register+0x78/0x10c)
[ 2.431815] [<c0b0909c>] (driver_register) from [<c030313c>] (do_one_initcall+0x8c/0x3ac)
[ 2.439954] [<c030313c>] (do_one_initcall) from [<c1f013f4>] (kernel_init_freeable+0x468/0x548)
[ 2.448610] [<c1f013f4>] (kernel_init_freeable) from [<c12344d8>] (kernel_init+0x8/0x10c)
[ 2.456745] [<c12344d8>] (kernel_init) from [<c03010b4>] (ret_from_fork+0x14/0x20)
[ 2.464273] Exception stack(0xea89ffb0 to 0xea89fff8)
[ 2.469297] ffa0: 00000000000000000000000000000000
[ 2.477432] ffc0: 0000000000000000000000000000000000000000000000000000000000000000
[ 2.485566] ffe0: 000000000000000000000000000000000000001300000000
Fixes: ff54571a747b ("ptp_qoriq: convert to use ptp_qoriq_init/free") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xennet_fill_frags() uses ~0U as return value when the sk_buff is not able
to cache extra fragments. This is incorrect because the return type of
xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for
ring buffer index.
In the situation when the rsp_cons is approaching 0xffffffff, the return
value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the
caller) would regard as error. As a result, queue->rx.rsp_cons is set
incorrectly because it is updated only when there is error. If there is no
error, xennet_poll() would be responsible to update queue->rx.rsp_cons.
Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose
queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL.
This leads to NULL pointer access in the next iteration to process rx ring
buffer entries.
The symptom is similar to the one fixed in
commit 00b368502d18 ("xen-netfront: do not assume sk_buff_head list is
empty in error handling").
This patch changes the return type of xennet_fill_frags() to indicate
whether it is successful or failed. The queue->rx.rsp_cons will be
always updated inside this function.
Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rds_ibdev:ipaddr_list and rds_ibdev:conn_list are initialized
after allocation some resources such as protection domain.
If allocation of such resources fail, then these uninitialized
variables are accessed in rds_ib_dev_free() in failure path. This
can potentially crash the system. The code has been updated to
initialize these variables very early in the function.
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to this change an application sending <= 1MSS worth of data and
enabling UDP GSO would fail if the system had SW GSO enabled, but the
same send would succeed if HW GSO offload is enabled. In addition to this
inconsistency the error in the SW GSO case does not get back to the
application if sending out of a real device so the user is unaware of this
failure.
With this change we only perform GSO if the # of segments is > 1 even
if the application has enabled segmentation. I've also updated the
relevant udpgso selftests.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cited commit exposed an old retransmits_timed_out() bug
which assumed it could call tcp_model_timeout() with
TCP_RTO_MIN as rto_base for all states.
But flows in SYN_SENT or SYN_RECV state uses a different
RTO base (1 sec instead of 200 ms, unless BPF choses
another value)
This caused a reduction of SYN retransmits from 6 to 4 with
the default /proc/sys/net/ipv4/tcp_syn_retries value.
Fixes: a41e8a88b06e ("tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Marek Majkowski <marek@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lockdep is unhappy if two locks from the same class are held.
Fix the below warning for hyperv and virtio sockets (vmci socket code
doesn't have the issue) by using lock_sock_nested() when __vsock_release()
is called recursively:
============================================
WARNING: possible recursive locking detected
5.3.0+ #1 Not tainted
--------------------------------------------
server/1795 is trying to acquire lock: ffff8880c5158990 (sk_lock-AF_VSOCK){+.+.}, at: hvs_release+0x10/0x120 [hv_sock]
but task is already holding lock: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock]
other info that might help us debug this:
Possible unsafe locking scenario:
Commit dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload")
added gso_segs calculation, but incorrectly got sizeof() the pointer and
not the underlying data type. In addition let's fix the v6 case.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Fixes: dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload") Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have identified a problem with the "oversubscription" policy in the
link transmission code.
When small messages are transmitted, and the sending link has reached
the transmit window limit, those messages will be bundled and put into
the link backlog queue. However, bundles of data messages are counted
at the 'CRITICAL' level, so that the counter for that level, instead of
the counter for the real, bundled message's level is the one being
increased.
Subsequent, to-be-bundled data messages at non-CRITICAL levels continue
to be tested against the unchanged counter for their own level, while
contributing to an unrestrained increase at the CRITICAL backlog level.
This leaves a gap in congestion control algorithm for small messages
that can result in starvation for other users or a "real" CRITICAL
user. Even that eventually can lead to buffer exhaustion & link reset.
We fix this by keeping a 'target_bskb' buffer pointer at each levels,
then when bundling, we only bundle messages at the same importance
level only. This way, we know exactly how many slots a certain level
have occupied in the queue, so can manage level congestion accurately.
By bundling messages at the same level, we even have more benefits. Let
consider this:
- One socket sends 64-byte messages at the 'CRITICAL' level;
- Another sends 4096-byte messages at the 'LOW' level;
When a 64-byte message comes and is bundled the first time, we put the
overhead of message bundle to it (+ 40-byte header, data copy, etc.)
for later use, but the next message can be a 4096-byte one that cannot
be bundled to the previous one. This means the last bundle carries only
one payload message which is totally inefficient, as for the receiver
also! Later on, another 64-byte message comes, now we make a new bundle
and the same story repeats...
With the new bundling algorithm, this will not happen, the 64-byte
messages will be bundled together even when the 4096-byte message(s)
comes in between. However, if the 4096-byte messages are sent at the
same level i.e. 'CRITICAL', the bundling algorithm will again cause the
same overhead.
Also, the same will happen even with only one socket sending small
messages at a rate close to the link transmit's one, so that, when one
message is bundled, it's transmitted shortly. Then, another message
comes, a new bundle is created and so on...
We will solve this issue radically by another patch.
Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 758cc43c6d73 ("[PKT_SCHED]: Fix dsmark to apply changes consistent") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the rxrpc_recvmsg tracepoint to handle being called with a NULL call
parameter.
Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 30cc4587659e ("NFC: Move LLCP code to the NFC top level diirectory") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "reuse->sock[]" array is shared by multiple sockets. The going away
sk must unpublish itself from "reuse->sock[]" before making call_rcu()
call. However, this unpublish-action is currently done after a grace
period and it may cause use-after-free.
The fix is to move reuseport_detach_sock() to sk_destruct().
Due to the above reason, any socket with sk_reuseport_cb has
to go through the rcu grace period before freeing it.
It is a rather old bug (~3 yrs). The Fixes tag is not necessary
the right commit but it is the one that introduced the SOCK_RCU_FREE
logic and this fix is depending on it.
Fixes: a4298e4522d6 ("net: add SOCK_RCU_FREE socket flag") Cc: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The speed divisor is used in a context expecting an s64, but it is
evaluated using 32-bit arithmetic.
To avoid that happening, instead of multiplying by 1,000,000 in the
first place, simplify the fraction and do a standard 32 bit division
instead.
Fixes: f04b514c0ce2 ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte") Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.
Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit c09551c6ff7f ("net: ipv4: use a dedicated counter
for icmp_v4 redirect packets") we use 'n_redirects' to account
for redirect packets, but we still use 'rate_tokens' to compute
the redirect packets exponential backoff.
If the device sent to the relevant peer any ICMP error packet
after sending a redirect, it will also update 'rate_token' according
to the leaking bucket schema; typically 'rate_token' will raise
above BITS_PER_LONG and the redirect packets backoff algorithm
will produce undefined behavior.
Fix the issue using 'n_redirects' to compute the exponential backoff
in ip_rt_send_redirect().
Note that we still clear rate_tokens after a redirect silence period,
to avoid changing an established behaviour.
The root cause predates git history; before the mentioned commit in
the critical scenario, the kernel stopped sending redirects, after
the mentioned commit the behavior more randomic.
Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: c09551c6ff7f ("net: ipv4: use a dedicated counter for icmp_v4 redirect packets") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in __ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.
Since the DAD sequence can not be aborted, add a check for the missing
host route in __ipv6_ifa_notify. The only way this should happen is due
to the previously mentioned race. The host route is created when the
address is added to an interface; it is only removed on a down event
where the address is kept. Add a warning if the host route is missing
AND the device is up; this is a situation that should never happen.
Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This began with a syzbot report. syzkaller was injecting
IPv6 TCP SYN packets having a v4mapped source address.
After an unsuccessful 4-tuple lookup, TCP creates a request
socket (SYN_RECV) and calls reqsk_queue_hash_req()
reqsk_queue_hash_req() calls sk_ehashfn(sk)
At this point we have AF_INET6 sockets, and the heuristic
used by sk_ehashfn() to either hash the IPv4 or IPv6 addresses
is to use ipv6_addr_v4mapped(&sk->sk_v6_daddr)
For the particular spoofed packet, we end up hashing V4 addresses
which were not initialized by the TCP IPv6 stack, so KMSAN fired
a warning.
I first fixed sk_ehashfn() to test both source and destination addresses,
but then faced various problems, including user-space programs
like packetdrill that had similar assumptions.
Instead of trying to fix the whole ecosystem, it is better
to admit that we have a dual stack behavior, and that we
can not build linux kernels without V4 stack anyway.
The dual stack API automatically forces the traffic to be IPv4
if v4mapped addresses are used at bind() or connect(), so it makes
no sense to allow IPv6 traffic to use the same v4mapped class.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 542f54823614 ("tty: Modem functions for the HSO driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
erspan driver calls ether_setup(), after commit 61e84623ace3
("net: centralize net_device min/max MTU checking"), the range
of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.
It causes the dev mtu of the erspan device to not be greater
than 1500, this limit value is not correct for ipgre tap device.
Tested:
Before patch:
# ip link set erspan0 mtu 1600
Error: mtu greater than device maximum.
After patch:
# ip link set erspan0 mtu 1600
# ip -d link show erspan0
21: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1600 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 0
Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When fetching free MSI-X vectors for ULDs, check for the error code
before accessing MSI-X info array. Otherwise, an out-of-bounds access is
attempted, which results in kernel panic.
Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the rpmsg_endpoint is created before probe is called, it's
possible that a host event is received during cros_ec_register, and
there would be some pending work in the host_event_work workqueue while
cros_ec_register is called.
If cros_ec_register fails, when the leftover work in host_event_work
run, the ec_dev from the drvdata of the rpdev could be already set to
NULL, causing kernel crash when trying to run cros_ec_get_next_event.
Fix this by creating the rpmsg_endpoint by ourself, and when
cros_ec_register fails (or on remove), destroy the endpoint first (to
make sure there's no more new calls to cros_ec_rpmsg_callback), and then
cancel all works in the host_event_work workqueue.
Cc: stable@vger.kernel.org Fixes: 2de89fd98958 ("platform/chrome: cros_ec: Add EC host command support using rpmsg") Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in
linux-firmware repository. Because of this mt7615 won't work on regular
distributions like Ubuntu. Fix path definitions. Moreover remove useless
firmware name pointers and use definitions directly
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the drives in a RAID0 are not all the same size, the array is
divided into zones.
The first zone covers all drives, to the size of the smallest.
The second zone covers all drives larger than the smallest, up to
the size of the second smallest - etc.
A change in Linux 3.14 unintentionally changed the layout for the
second and subsequent zones. All the correct data is still stored, but
each chunk may be assigned to a different device than in pre-3.14 kernels.
This can lead to data corruption.
It is not possible to determine what layout to use - it depends which
kernel the data was written by.
So we add a module parameter to allow the old (0) or new (1) layout to be
specified, and refused to assemble an affected array if that parameter is
not set.
Fixes: 20d0189b1012 ("block: Introduce new bio_split()")
cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.
Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.
Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.
This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.
add_early_randomness() is called by hwrng_register() when the
hardware is added. If this hardware and its module are present
at boot, and if there is no data available the boot hangs until
data are available and can't be interrupted.
For instance, in the case of virtio-rng, in some cases the host can be
not able to provide enough entropy for all the guests.
We can have two easy ways to reproduce the problem but they rely on
misconfiguration of the hypervisor or the egd daemon:
- if virtio-rng device is configured to connect to the egd daemon of the
host but when the virtio-rng driver asks for data the daemon is not
connected,
- if virtio-rng device is configured to connect to the egd daemon of the
host but the egd daemon doesn't provide data.
The guest kernel will hang at boot until the virtio-rng driver provides
enough data.
To avoid that, call rng_get_data() in non-blocking mode (wait=0)
from add_early_randomness().
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Fixes: d9e797261933 ("hwrng: add randomness to system from rng...") Cc: <stable@vger.kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quoted from
commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")
" At LSF we decided that if we truncate up from isize we shouldn't trim
fallocated blocks that were fallocated with KEEP_SIZE and are past the
new i_size. This patch fixes ext4 to do this. "
And generic/092 of fstest have covered this case for long time, however
is_quota_modification() didn't adjust based on that rule, so that in
below condition, we will lose to quota block change:
- fallocate blocks beyond EOF
- remount
- truncate(file_path, file_size)
Fix it.
Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com Fixes: 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize") CC: stable@vger.kernel.org Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument. This was introduced in commit ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.
This patch solves warnings detected by setting W=1 when building.
Warnings type detected:
drivers/mtd/nand/raw/stm32_fmc2_nand.c: In function ‘stm32_fmc2_calc_timings’:
drivers/mtd/nand/raw/stm32_fmc2_nand.c:1417:23: warning: comparison is
always false due to limited range of data type [-Wtype-limits]
else if (tims->twait > FMC2_PMEM_PATT_TIMING_MASK)
projects / thirdparty / kernel / stable.git / log
