Dave Airlie [Sat, 27 Dec 2025 07:17:39 +0000 (17:17 +1000)]
Merge tag 'drm-xe-next-2025-12-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
[airlied: fix guc submit double definition]
UAPI Changes:
- Multi-Queue support (Niranjana)
- Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE (Brost)
- Add NO_COMPRESSION BO flag and query capability (Sanjay)
- Add gt_id to struct drm_xe_oa_unit (Ashutosh)
- Expose MERT OA unit (Ashutosh)
- Sysfs Survivability refactor (Riana)
Cross-subsystem Changes:
- VFIO: Add device specific vfio_pci driver variant for Intel graphics (Winiarski)
Driver Changes:
- MAINTAINERS update (Lucas -> Matt)
- Add helper to query compression enable status (Xin)
- Xe_VM fixes and updates (Shuicheng, Himal)
- Documentation fixes (Winiarski, Swaraj, Niranjana)
- Kunit fix (Roper)
- Fix potential leaks, uaf, null derref, and oversized
allocations (Shuicheng, Sanjay, Mika, Tapani)
- Other minor fixes like kbuild duplication and sysfs_emit (Shuicheng, Madhur)
- Handle msix vector0 interrupt (Venkata)
- Scope-based forcewake and runtime PM (Roper, Raag)
- GuC/HuC related fixes and refactors (Lucas, Zhanjun, Brost, Julia, Wajdeczko)
- Fix conversion from clock ticks to milliseconds (Harish)
- SRIOV PF PF: Add support for MERT (Lukasz)
- Enable SR-IOV VF migration and other SRIOV updates (Winiarski,
Satya, Brost, Wajdeczko, Piotr, Tomasz, Daniele)
- Optimize runtime suspend/resume and other PM improvements (Raag)
- Some W/a additions and updates (Bala, Harish, Roper)
- Use for_each_tlb_inval() to calculate invalidation fences (Roper)
- Fix VFIO link error (Arnd)
- Fix ix drm_gpusvm_init() arguments (Arnd)
- Other OA refactor (Ashutosh)
- Refactor PAT and expose debugfs (Xin)
- Enable Indirect Ring State for xe3p_xpc (Niranjana)
- MEI interrupt fix (Junxiao)
- Add stats for mode switching on hw_engine_group (Francois)
- DMA-Buf related changes (Thomas)
- Multi Queue feature support (Niranjana)
- Enable I2C controller for Crescent Island (Raag)
- Enable NVM for Crescent Island (Sasha)
- Increase TDF timeout (Jagmeet)
- Restore engine registers before restarting schedulers after GT reset (Jan)
- Page Reclamation Support for Xe3p Platforms (Brian, Brost, Oak)
- Fix performance when pagefaults and 3d/display share resources (Brost)
- More OA MERT work (Ashutosh)
- Fix return values (Dan)
- Some log level and messages improvements (Brost)
Dave Airlie [Sat, 27 Dec 2025 06:25:56 +0000 (16:25 +1000)]
Merge tag 'drm-intel-next-2025-12-19' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Beyond Display related:
- Switch to use kernel standard fault injection in i915 (Juha-Pekka)
Display uAPI related:
- Display uapi vs. hw state fixes (Ville)
- Expose sharpness only if num_scalers is >= 2 (Nemesa)
Display related:
- More display driver refactor and clean-ups, specially towards separation (Jani)
- Add initial support Xe3p_LPD for NVL (Gustavo, Sai, )
- BMG FBC W/a (Vinod)
- RPM fix (Dibin)
- Add MTL+ platforms to support dpll framework (Mika, Imre)
- Other PLL related fixes (Imre)
- Fix DIMM_S DRAM decoding on ICL (Ville)
- Async flip refactor (Ville, Jouni)
- Go back to using AUX interrupts (Ville)
- Reduce severity of failed DII FEC enabling (Grzelak)
- Enable system cache support for FBC (Vinod)
- Move PSR/Panel Replay sink data into intel_connector and other PSR changes (Jouni)
- Detect AuxCCS support via display parent interface (Tvrtko)
- Clean up link BW/DSC slice config computation(Imre)
- Toggle powerdown states for C10 on HDMI (Gustavo)
- Add parent interface for PC8 forcewake tricks (Ville)
- atomic: Add drm_device pointer to drm_private_obj
- bridge: Introduce drm_bridge_unplug, drm_bridge_enter, and
drm_bridge_exit
- dma-buf: Improve sg_table debugging
- dma-fence: Add new helpers, and use them when needed
- dp_mst: Avoid out-of-bounds access with VCPI==0
- gem: Reduce page table overhead with transparent huge pages
- panic: Report invalid panic modes
- sched: Add TODO entries
- ttm: Various cleanups
- vblank: Various refactoring and cleanups
- Kconfig cleanups
- Removed support for kdb
Driver Changes:
- amdxdna: Fix race conditions at suspend, Improve handling of zero
tail pointers, Fix cu_idx being overwritten during command setup
- ast: Support imported cursor buffers
-
- panthor: Enable timestamp propagation, Multiple improvements and
fixes to improve the overall robustness, notably of the scheduler.
- panels:
- panel-edp: Support for CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
Linus Torvalds [Sun, 21 Dec 2025 23:28:59 +0000 (15:28 -0800)]
Merge tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull Coccinelle fixes from Julia Lawall:
"These fix a typo and make the coccicheck script more robust by
ensuring that only compatible semantic patches are executed for the
chosen mode"
* tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix typo in report message
scripts: coccicheck: filter *.cocci files by MODE
Linus Torvalds [Sun, 21 Dec 2025 22:41:29 +0000 (14:41 -0800)]
Merge tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
Songwei Chai [Fri, 6 Jun 2025 06:09:36 +0000 (14:09 +0800)]
scripts: coccicheck: filter *.cocci files by MODE
Enhance the coccicheck script to filter *.cocci files based on the
specified MODE (e.g., report, patch). This ensures that only compatible
semantic patch files are executed, preventing errors such as:
"virtual rule report not supported"
This error occurs when a .cocci file does not define a 'virtual <MODE>'
rule, yet is executed in that mode.
For example:
make coccicheck M=drivers/hwtracing/coresight/ MODE=report
In this case, running "secs_to_jiffies.cocci" would trigger the error
because it lacks support for 'report' mode. With this change, such files
are skipped automatically, improving robustness and developer
experience.
Signed-off-by: Songwei Chai <quic_songchai@quicinc.com> Reviewed-by: Julia Lawall <Julia.Lawall@inria.fr>
Linus Torvalds [Sun, 21 Dec 2025 00:54:42 +0000 (16:54 -0800)]
Merge tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes for various SPI drivers, plus a relaxation
of constraints in the DT for the DesignWare controller to reflect
hardware that's been seen.
There's several fixes for the Cadence QuadSPI driver since a fix
during the last release made some existing issues with error handling
during probe more readily visible"
* tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mt65xx: Use IRQF_ONESHOT with threaded IRQ
spi: dt-bindings: snps,dw-abp-ssi: Allow up to 16 chip-selects
spi: cadence-quadspi: Fix clock disable on probe failure path
spi: cadence-quadspi: Add error logging for DMA request failure
spi: fsl-cpm: Check length parity before switching to 16 bit mode
spi: mpfs: Fix an error handling path in mpfs_spi_probe()
// Three instructions to ajust the stack, read the per-cpu canary
// and copy it to 8(%rsp) ffffffff82067a3a: 48 83 ec 10 sub $0x10,%rsp ffffffff82067a3e: 65 48 8b 05 da 15 45 02 mov %gs:0x24515da(%rip),%rax # <__stack_chk_guard> ffffffff82067a46: 48 89 44 24 08 mov %rax,0x8(%rsp)
Linus Torvalds [Sat, 20 Dec 2025 20:45:35 +0000 (12:45 -0800)]
Merge tag 'xfs-fixes-6.19-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This contains a few fixes for zoned devices support, an UAF and a
compiler warning, and some cleaning up"
* tag 'xfs-fixes-6.19-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix the zoned RT growfs check for zone alignment
xfs: validate that zoned RT devices are zone aligned
xfs: fix XFS_ERRTAG_FORCE_ZERO_RANGE for zoned file system
xfs: fix a memory leak in xfs_buf_item_init()
xfs: fix stupid compiler warning
xfs: fix a UAF problem in xattr repair
xfs: ignore discard return value
Linus Torvalds [Sat, 20 Dec 2025 20:22:53 +0000 (12:22 -0800)]
Merge tag 'hwmon-for-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc4282: Fix reset_history file permissions
- ds620: Update broken Datasheet URL in driver documentation
- tmp401: Fix overflow caused by default conversion rate value
- ibmpex: Fix use-after-free in high/low store
- dell-smm: Limit fan multiplier to avoid overflow
* tag 'hwmon-for-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc4282): Fix reset_history file permissions
hwmon: (DS620) Update broken Datasheet URL in driver documentation
hwmon: (tmp401) fix overflow caused by default conversion rate value
hwmon: (ibmpex) fix use-after-free in high/low store
hwmon: (dell-smm) Limit fan multiplier to avoid overflow
Linus Torvalds [Sat, 20 Dec 2025 20:18:32 +0000 (12:18 -0800)]
Merge tag 'mmc-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-esdhc-imx: Fix build problem dependency
- sdhci-of-arasan: Increase card-detect stable timeout to 2 seconds
- sdhci-of-aspeed: Fix DT doc for missing properties
* tag 'mmc-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: add alternate ARCH_S32 dependency to Kconfig
mmc: sdhci-of-arasan: Increase CD stable timeout to 2 seconds
dt-bindings: mmc: sdhci-of-aspeed: Switch ref to sdhci-common.yaml
Linus Torvalds [Sat, 20 Dec 2025 20:08:02 +0000 (12:08 -0800)]
Merge tag 'drm-fixes-2025-12-20' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"rc2 fixes for the week, mostly xe, with amdgpu as usual. Then a
smattering of small fixes across the core/tests/panel and amdxdna.
I expect things will be quiet for rc3/4 as teams take a break, and I'm
travelling but will keep an eye on things.
core:
- fix gem handle leak on DRM_IOCTL_GEM_CHANGE_HANDLE
xe:
- Limit num_syncs to prevent oversized kernel allocations
- Disallow 0 OA property values
- Disallow 0 EU stall property values
- Fix kobject leak
- Workaround
- Loop variable reference fix
- Fix a CONFIG corner-case incorrect number of argument
- Skip reason prefix while emitting array
- VF migration fix
- Fix context in mei interrupt top half
- Don't include the CCS metadata in the dma-buf sg-table
- VF queueing recovery work fix
- Increase TDF timeout
- GT reset registers vs scheduler ordering fix
- Adjust long-running workload timeslices
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME
- Fix a return value
- Drop preempt-fences when destroying imported dma-bufs
- Use usleep_range for accurate long-running workload timeslicing
* tag 'drm-fixes-2025-12-20' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/xe: Use usleep_range for accurate long-running workload timeslicing
drm/xe: Drop preempt-fences when destroying imported dma-bufs.
drm/xe/eustall: Disallow 0 EU stall property values
drm/xe/oa: Disallow 0 OA property values
drm/xe/xe_sriov_vfio: Fix return value in xe_sriov_vfio_migration_supported()
drm/xe/oa: Always set OAG_OAGLBCTXCTRL_COUNTER_RESUME
drm/xe: Adjust long-running workload timeslices to reasonable values
drm/xe/oa: Limit num_syncs to prevent oversized allocations
drm/xe: Limit num_syncs to prevent oversized allocations
drm/amdkfd: Fix improper NULL termination of queue restore SMI event string
drm/amd/pm: restore SCLK settings after S0ix resume
drm/amdgpu: fix a job->pasid access race in gpu recovery
drm/amd/display: Fix DP no audio issue
drm/amd/display: Fix scratch registers offsets for DCN351
drm/amd/display: Fix scratch registers offsets for DCN35
drm/amd: Resume the device in thaw() callback when console suspend is disabled
drm/panel: visionox-rm69299: Depend on BACKLIGHT_CLASS_DEVICE
accel/amdxdna: Block running under a hypervisor
drm/panel: sony-td4353-jdi: Enable prepare_prev_first
drm/xe: Restore engine registers before restarting schedulers after GT reset
...
Linus Torvalds [Sat, 20 Dec 2025 19:59:06 +0000 (11:59 -0800)]
Merge tag 'linux_kselftest-kunit-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Drop unused parameter from kunit_device_register_internal and make
FAULT_TEST default to n when PANIC_ON_OOPS"
* tag 'linux_kselftest-kunit-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: make FAULT_TEST default to n when PANIC_ON_OOPS
kunit: Drop unused parameter from kunit_device_register_internal
Linus Torvalds [Sat, 20 Dec 2025 19:40:51 +0000 (11:40 -0800)]
Merge tag 'mips-fixes_6.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix build error for Alchemy
- Fix reference leak
* tag 'mips-fixes_6.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix a reference leak bug in ip22_check_gio()
MIPS: Alchemy: Remove bogus static/inline specifiers
Linus Torvalds [Sat, 20 Dec 2025 19:34:37 +0000 (11:34 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
Linus Torvalds [Sat, 20 Dec 2025 19:31:37 +0000 (11:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm fixes from Paolo Bonzini:
"x86 fixes. Everyone else is already in holiday mood apparently.
- Add a missing 'break' to fix param parsing in the rseq selftest
- Apply runtime updates to the _current_ CPUID when userspace is
setting CPUID, e.g. as part of vCPU hotplug, to fix a false
positive and to avoid dropping the pending update
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as
it's not supported by KVM and leads to a use-after-free due to KVM
failing to unbind the memslot from the previously-associated
guest_memfd instance
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for
supporting flags-only changes on KVM_MEM_GUEST_MEMFD memlslots,
e.g. for dirty logging
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is
defined as -1ull (a 64-bit value)
- Update SVI when activating APICv to fix a bug where a
post-activation EOI for an in-service IRQ would effective be lost
due to SVI being stale
- Immediately refresh APICv controls (if necessary) on a nested
VM-Exit instead of deferring the update via KVM_REQ_APICV_UPDATE,
as the request is effectively ignored because KVM thinks the vCPU
already has the correct APICv settings"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Immediately refresh APICv controls as needed on nested VM-Exit
KVM: VMX: Update SVI during runtime APICv activation
KVM: nSVM: Set exit_code_hi to -1 when synthesizing SVM_EXIT_ERR (failed VMRUN)
KVM: nSVM: Clear exit_code_hi in VMCB when synthesizing nested VM-Exits
KVM: Harden and prepare for modifying existing guest_memfd memslots
KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot
KVM: selftests: Add a CPUID testcase for KVM_SET_CPUID2 with runtime updates
KVM: x86: Apply runtime updates to current CPUID during KVM_SET_CPUID{,2}
KVM: selftests: Add missing "break" in rseq_test's param parsing
Linus Torvalds [Sat, 20 Dec 2025 19:24:42 +0000 (11:24 -0800)]
Merge tag 'slab-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for a missing tag reset that can happen in
kfree_nolock() with KASAN+SLUB_TINY configs (Deepanshu Kartikey)
* tag 'slab-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: reset KASAN tag in defer_free() before accessing freed memory
Linus Torvalds [Sat, 20 Dec 2025 19:18:32 +0000 (11:18 -0800)]
Merge tag 'iommu-fixes-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- iommupt: Fix an oops found by syzcaller in the new generic
IO-page-table code.
- AMD-Vi: Fix IO_PAGE_FAULTs in kdump kernels triggered by re-using
domain-ids from previous kernel.
* tag 'iommu-fixes-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
amd/iommu: Make protection domain ID functions non-static
amd/iommu: Preserve domain ids inside the kdump kernel
iommupt: Return ERR_PTR from _table_alloc()
Linus Torvalds [Sat, 20 Dec 2025 17:48:56 +0000 (09:48 -0800)]
Merge tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
Linus Torvalds [Sat, 20 Dec 2025 17:38:56 +0000 (09:38 -0800)]
Merge tag 'io_uring-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix this week, for an issue with the calculation of the
number of segments in the ublk kbuf import path"
* tag 'io_uring-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix nr_segs calculation in io_import_kbuf
Matthew Brost [Thu, 18 Dec 2025 22:37:45 +0000 (14:37 -0800)]
drm/xe: Increase log level for unhandled page faults
Set the kernel log level for unhandled page faults to match the log
level (info) for engine resets. Currently, dmesg output can be confusing
because it shows an engine reset without indicating the page fault that
caused it. Without this change, the GuC log must be examined to
determine the source of the engine reset.
Ville Syrjälä [Thu, 18 Dec 2025 18:20:52 +0000 (20:20 +0200)]
drm/i915/pc8: Add parent interface for PC8 forcewake tricks
We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Gustavo Sousa [Tue, 16 Dec 2025 21:12:01 +0000 (18:12 -0300)]
drm/i915/cx0: Toggle powerdown states for C10 on HDMI
A new step has been added to Bspec with respect to the C10 PHY, which
instructs the driver to toggle powerdown value for boths PHY lanes to P0
and then P2 when driving an HDMI connector. This update in the Bspec
reflects the changes required by Wa_14026084006, so document it.
Note that, unlike other display workarounds, this one is actually tied
to the C10 PHY and not to a specific display IP. As such, let's just
document it in intel_cx0_phy.c instead of adding it to
intel_display_wa.c.
Gustavo Sousa [Tue, 16 Dec 2025 21:12:00 +0000 (18:12 -0300)]
drm/i915/cx0: Use a more accurate message for powerdown change failure
We do not use the function intel_cx0_powerdown_change_sequence()
exclusively to take the PHY out of reset, hence the warning message on
failure is misleading. Furthermore, in an upcoming change, we will also
use that function to implement a new C10 PHY workaround.
Use a more accurate message by saying that we failed to change the
powerdown state.
Catalin Marinas [Fri, 19 Dec 2025 15:09:09 +0000 (15:09 +0000)]
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
Since commit eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC
occurring in hardirq context"), building with clang for x86_64 results
in the following warnings:
vmlinux.o: warning: objtool: lkdtm_PANIC_IN_HARDIRQ(): unexpected end of section .text.lkdtm_PANIC_IN_HARDIRQ
vmlinux.o: warning: objtool: lkdtm_BUG_IN_HARDIRQ(): unexpected end of section .text.lkdtm_BUG_IN_HARDIRQ
caused by busy "while (wait_for_...);" loops. Add READ_ONCE() and
cpu_relax() to better indicate the intention and avoid any unwanted
compiler optimisations.
Fixes: eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512190111.jxFSqxUH-lkp@intel.com/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Imre Deak [Mon, 15 Dec 2025 19:23:56 +0000 (21:23 +0200)]
drm/i915/dp: Fail state computation for invalid DSC source input BPP values
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Imre Deak [Mon, 15 Dec 2025 19:23:53 +0000 (21:23 +0200)]
drm/i915/dp: Fail state computation for invalid min/max link BPP values
Make sure that state computation fails if the minimum/maximum link BPP
values got invalid as a result of limiting both of these values
separately to the corresponding source/sink capability limits.
Imre Deak [Mon, 15 Dec 2025 19:23:52 +0000 (21:23 +0200)]
drm/i915/dp: Account with pipe joiner max compressed BPP limit for DP-MST and eDP
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Imre Deak [Mon, 15 Dec 2025 19:23:51 +0000 (21:23 +0200)]
drm/i915/dp: Account with DSC BW overhead for compressed DP-SST stream BW
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Imre Deak [Mon, 15 Dec 2025 19:23:50 +0000 (21:23 +0200)]
drm/i915/dp: Account with MST, SSC BW overhead for uncompressed DP-MST stream BW
On MST links the symbol alignment and SSC have a BW overhead, which
should be accounted for when calculating the required stream BW, do so
during mode validation for an uncompressed stream.
Imre Deak [Mon, 15 Dec 2025 19:23:49 +0000 (21:23 +0200)]
drm/i915/dp: Use the effective data rate for DP compressed BW calculation
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Imre Deak [Mon, 15 Dec 2025 19:23:48 +0000 (21:23 +0200)]
drm/i915/dp: Use the effective data rate for DP BW calculation
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Imre Deak [Mon, 15 Dec 2025 19:23:45 +0000 (21:23 +0200)]
drm/i915/dp: Use a mode's crtc_clock vs. clock during state computation
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Imre Deak [Mon, 15 Dec 2025 19:23:44 +0000 (21:23 +0200)]
drm/i915/dp: Return a fixed point BPP value from intel_dp_output_bpp()
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Imre Deak [Mon, 15 Dec 2025 19:23:42 +0000 (21:23 +0200)]
drm/dp: Add drm_dp_dsc_sink_slice_count_mask()
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Sairaj Kodilkar [Fri, 21 Nov 2025 09:11:16 +0000 (14:41 +0530)]
amd/iommu: Make protection domain ID functions non-static
So that both iommu.c and init.c can utilize them. Also define a new
function 'pdom_id_destroy()' to destroy 'pdom_ids' instead of directly
calling ida functions.
Sairaj Kodilkar [Fri, 21 Nov 2025 09:11:15 +0000 (14:41 +0530)]
amd/iommu: Preserve domain ids inside the kdump kernel
Currently AMD IOMMU driver does not reserve domain ids programmed in the
DTE while reusing the device table inside kdump kernel. This can cause
reallocation of these domain ids for newer domains that are created by
the kdump kernel, which can lead to potential IO_PAGE_FAULTs
Hence reserve these ids inside pdom_ids.
Fixes: 38e5f33ee359 ("iommu/amd: Reuse device table for kdump") Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com> Reported-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Junjie Cao [Fri, 19 Dec 2025 05:56:59 +0000 (21:56 -0800)]
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com> Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Gergo Koteles [Thu, 13 Nov 2025 16:02:58 +0000 (17:02 +0100)]
Input: add ABS_SND_PROFILE
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Swaraj Gaikwad [Tue, 9 Dec 2025 09:48:36 +0000 (09:48 +0000)]
drm/xe: Fix documentation heading levels in xe_guc_pc.c
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Dave Airlie [Thu, 18 Dec 2025 21:32:21 +0000 (07:32 +1000)]
Merge tag 'drm-misc-fixes-2025-12-18' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc2:
- Add -EDEADLK handling in drm unit tests.
- Plug DRM_IOCTL_GEM_CHANGE_HANDLE leak.
- Fix regression in sony-td4353-jdi.
- Kconfig fix for visionox-rm69299.
- Do not load amdxdna when running virtualized.
Linus Torvalds [Thu, 18 Dec 2025 21:30:55 +0000 (09:30 +1200)]
Merge tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS
file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when perf
attaches to them. This causes a warning when perf registers a
synthetic event and passes a NULL pointer to the tracepoint register
function.
Ideally synthetic events should be updated to work with perf, but as
that's a feature and not a bug fix, simply now return -ENODEV when
perf tries to register an event that has a NULL pointer for its
function. This no longer causes a kernel warning and simply causes
the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to to be
1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
* tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix address for jmp mode in t_show()
tracing: Fix UBSAN warning in __remove_instance()
tracing: Do not register unsupported perf events
MAINTAINERS: add tracepoint core-api doc files to TRACING
Linus Torvalds [Thu, 18 Dec 2025 20:39:48 +0000 (08:39 +1200)]
Merge tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a performance issue with the scoped_ksimd() macro (new in 6.19)
where it unnecessarily initialized the entire fpsimd state.
- Add a missing gitignore entry for a generated file added in 6.18.
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: riscv: Add poly1305-core.S to .gitignore
arm64/simd: Avoid pointless clearing of FP/SIMD buffer
Linus Torvalds [Thu, 18 Dec 2025 20:37:08 +0000 (08:37 +1200)]
Merge tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
Linus Torvalds [Thu, 18 Dec 2025 20:28:02 +0000 (08:28 +1200)]
Merge tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
Linus Torvalds [Thu, 18 Dec 2025 20:23:23 +0000 (08:23 +1200)]
Merge tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com> Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715; Fixes: 471a92f8a21a ("Input: apple_z2 - add a driver for Apple Z2 touchscreens") Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Thu, 18 Dec 2025 20:11:53 +0000 (08:11 +1200)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
Linus Torvalds [Thu, 18 Dec 2025 19:50:20 +0000 (07:50 +1200)]
Merge tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- important fix for reconnect problem
- minor cleanup
* tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb: move some SMB1 definitions into common/smb1pdu.h
smb: align durable reconnect v2 context to 8 byte boundary
Linus Torvalds [Thu, 18 Dec 2025 19:41:17 +0000 (07:41 +1200)]
Merge tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Two fsnotify fixes.
The fix from Ahelenia makes sure we generate event when modifying
inode flags, the fix from Amir disables sending of events from device
inodes to their parent directory as it could concievably create a
usable side channel attack in case of some devices and so far we
aren't aware of anybody depending on the functionality"
* tag 'fsnotify_for_v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: send fsnotify_xattr()/IN_ATTRIB from vfs_fileattr_set()/chattr(1)
fsnotify: do not generate ACCESS/MODIFY events on child for special files
Lizhi Hou [Wed, 17 Dec 2025 19:11:50 +0000 (11:11 -0800)]
accel/amdxdna: Enable temporal sharing only mode
Newer firmware versions prefer temporal sharing only mode. In this mode,
the driver no longer needs to manage AIE array column allocation. Instead,
a new field, num_unused_col, is added to the hardware context creation
request to specify how many columns will not be used by this hardware
context.
Paolo Bonzini [Thu, 18 Dec 2025 17:38:45 +0000 (18:38 +0100)]
Merge tag 'kvm-x86-fixes-6.19-rc1' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 6.19-rc1
- Add a missing "break" to fix param parsing in the rseq selftest.
- Apply runtime updates to the _current_ CPUID when userspace is setting
CPUID, e.g. as part of vCPU hotplug, to fix a false positive and to avoid
dropping the pending update.
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as it's not
supported by KVM and leads to a use-after-free due to KVM failing to unbind
the memslot from the previously-associated guest_memfd instance.
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for supporting
flags-only changes on KVM_MEM_GUEST_MEMFD memlslots, e.g. for dirty logging.
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is defined
as -1ull (a 64-bit value).
- Update SVI when activating APICv to fix a bug where a post-activation EOI
for an in-service IRQ would effective be lost due to SVI being stale.
- Immediately refresh APICv controls (if necessary) on a nested VM-Exit
instead of deferring the update via KVM_REQ_APICV_UPDATE, as the request is
effectively ignored because KVM thinks the vCPU already has the correct
APICv settings.
Matthew Brost [Fri, 12 Dec 2025 18:28:42 +0000 (10:28 -0800)]
drm/xe: Use usleep_range for accurate long-running workload timeslicing
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Thomas Hellström [Wed, 17 Dec 2025 09:34:41 +0000 (10:34 +0100)]
drm/xe: Drop preempt-fences when destroying imported dma-bufs.
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Fixes: fa0af721bd1f ("drm/ttm: test private resv obj on release/destroy") Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.16+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb513b567bd6d01f397d274092a9c274) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Ashutosh Dixit [Fri, 12 Dec 2025 06:18:49 +0000 (22:18 -0800)]
drm/xe/oa: Disallow 0 OA property values
An OA property value of 0 is invalid and will cause a NPD.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6452 Fixes: cc4e6994d5a2 ("drm/xe/oa: Move functions up so they can be reused for config ioctl") Cc: stable@vger.kernel.org Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Harish Chegondi <harish.chegondi@intel.com> Link: https://patch.msgid.link/20251212061850.1565459-3-ashutosh.dixit@intel.com
(cherry picked from commit 7a100e6ddcc47c1f6ba7a19402de86ce24790621) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Dan Carpenter [Fri, 5 Dec 2025 11:39:19 +0000 (14:39 +0300)]
drm/xe/xe_sriov_vfio: Fix return value in xe_sriov_vfio_migration_supported()
The xe_sriov_vfio_migration_supported() function is type bool so
returning -EPERM means returning true. Return false instead.
Fixes: bd45d46ffc8f ("drm/xe/pf: Export helpers for VFIO") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patch.msgid.link/aTLEZ4g-FD-iMQ2V@stanley.mountain Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 0a2404c8f6a3a120f79c57ef8a3302c8e8bc34d9) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Ashutosh Dixit [Fri, 5 Dec 2025 21:26:13 +0000 (13:26 -0800)]
drm/xe/oa: Always set OAG_OAGLBCTXCTRL_COUNTER_RESUME
Reports can be written out to the OA buffer using ways other than periodic
sampling. These include mmio trigger and context switches. To support these
use cases, when periodic sampling is not enabled,
OAG_OAGLBCTXCTRL_COUNTER_RESUME must be set.
Matthew Brost [Fri, 12 Dec 2025 18:28:41 +0000 (10:28 -0800)]
drm/xe: Adjust long-running workload timeslices to reasonable values
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Shuicheng Lin [Fri, 5 Dec 2025 23:47:18 +0000 (23:47 +0000)]
drm/xe/oa: Limit num_syncs to prevent oversized allocations
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
Fixes: c8507a25cebd ("drm/xe/oa/uapi: Define and parse OA sync properties") Cc: Matthew Brost <matthew.brost@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20251205234715.2476561-6-shuicheng.lin@intel.com
(cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Shuicheng Lin [Fri, 5 Dec 2025 23:47:17 +0000 (23:47 +0000)]
drm/xe: Limit num_syncs to prevent oversized allocations
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450 Cc: <stable@vger.kernel.org> # v6.12+ Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Carl Zhang <carl.zhang@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Ivan Briano <ivan.briano@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
(cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Various code assumes that the integrity interval is at least 1 sector
and evenly divides the logical block size. Add these checks to
blk_validate_integrity_limits(). This guards against block drivers that
report invalid interval_exp values.
The PI tuple must be contained within the metadata value, so validate
that pi_offset + pi_tuple_size <= metadata_size. This guards against
block drivers that report invalid pi_offset values.
Thomas Hellström [Wed, 17 Dec 2025 09:34:41 +0000 (10:34 +0100)]
drm/xe: Drop preempt-fences when destroying imported dma-bufs.
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Fixes: fa0af721bd1f ("drm/ttm: test private resv obj on release/destroy") Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.16+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
projects / thirdparty / kernel / linux.git / log
