Nick Bowler [Thu, 11 Jul 2024 03:54:17 +0000 (23:54 -0400)]
macintosh/therm_windtunnel: fix module unload.
The of_device_unregister call in therm_windtunnel's module_exit procedure
does not fully reverse the effects of of_platform_device_create in the
module_init prodedure. Once you unload this module, it is impossible
to load it ever again since only the first of_platform_device_create
call on the fan node succeeds.
This driver predates first git commit, and it turns out back then
of_platform_device_create worked differently than it does today.
So this is actually an old regression.
The appropriate function to undo of_platform_device_create now appears
to be of_platform_device_destroy, and switching to use this makes it
possible to unload and load the module as expected.
powerpc: Check only single values are passed to CPU/MMU feature checks
cpu_has_feature()/mmu_has_feature() are only able to check a single
feature at a time, but there is no enforcement of that.
In fact, as fixed in the previous commit, there was code that was
passing multiple values to cpu_has_feature().
So add a check that only a single feature is passed using popcount.
Note that the test allows 0 or 1 bits to be set, because some code
relies on cpu_has_feature(0) being false, the check with
CPU_FTRS_POSSIBLE ensures that. See for example CPU_FTR_PPC_LE.
In the xmon disassembly code there are several CPU feature checks to
determine what dialects should be passed to the disassembler. The
dialect controls which instructions the disassembler will recognise.
Unfortunately the checks are incorrect, because instead of passing a
single CPU feature they are passing a mask of feature bits.
For example the code:
if (cpu_has_feature(CPU_FTRS_POWER5))
dialect |= PPC_OPCODE_POWER5;
Is trying to check if the system is running on a Power5 CPU. But
CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on
a Power5.
In practice the test will always return true for any 64-bit CPU, because
at least one bit in the mask will be present in the CPU_FTRS_ALWAYS
mask.
Similarly for all the other checks against CPU_FTRS_xx masks.
Rather than trying to match the disassembly behaviour exactly to the
current CPU, just differentiate between 32-bit and 64-bit, and Altivec,
VSX and HTM.
That will cause some instructions to be shown in disassembly even
on a CPU that doesn't support them, but that's OK, objdump -d output
has the same behaviour, and if anything it's less confusing than some
instructions not being disassembled.
powerpc: Drop clang workaround for builtin constant checks
The CPU/MMU feature code has build-time checks that the feature value is
a builtin constant.
Back when the code was added clang wasn't able to compile the
checks, so an ifdef was added to avoid the checks for clang builds.
See commit b5fa0f7f88ed ("powerpc: Fix build failure with clang due
to BUILD_BUG_ON()")
These days clang 13 and later are able to build the checks successfully,
so drop the workaround.
There is an issue with the hotplug operation when it's done on the
bridge/switch slot. The bridge-port and devices behind the bridge, which
become offline by hot-unplug operation, don't get hot-plugged/enabled
by doing hot-plug operation on that slot. Only the first port of the
bridge gets enabled and the remaining port/devices remain unplugged. The
hot plug/unplug operation is done by the hotplug driver (drivers/pci/
hotplug/pnv_php.c).
This behavior is due to missing code for the switch/bridge. The existing
driver depends on pci_hp_add_devices() function for device enablement.
This function calls pci_scan_slot() on only one device-node/port of the
bridge, not on all the siblings' device-node/port.
The missing code needs to be added which will find all the sibling
device-nodes/bridge-ports and will run explicit pci_scan_slot()
on those. A new function has been added for this purpose
which is invoked from pci_hp_add_devices(). This new function
traverse_siblings_and_scan_slot() gets all the sibling bridge-ports by
traversal and explicitly invokes pci_scan_slot() on them.
Tested-by: Shawn Anastasio <sanastasio@raptorengineering.com> Signed-off-by: Krishna Kumar <krishnak@linux.ibm.com>
[mpe: Move the code into pci-hotplug.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240701074513.94873-3-krishnak@linux.ibm.com
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed.
Esben Haabendal [Thu, 30 May 2024 14:46:37 +0000 (16:46 +0200)]
powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC
With CONFIG_FSL_IFC now being user-visible, and thus changed from a select
to depends in CONFIG_MTD_NAND_FSL_IFC, the dependencies needs to be
selected in defconfigs.
Depends-on: 9ba0cae3cac0 ("memory: fsl_ifc: Make FSL_IFC config visible and selectable") Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240530-fsl-ifc-config-v3-2-1fd2c3d233dd@geanix.com
Jeff Johnson [Sat, 15 Jun 2024 17:06:18 +0000 (10:06 -0700)]
powerpc: add missing MODULE_DESCRIPTION() macros
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kernel/rtas_flash.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/sysdev/rtc_cmos_setup.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/pseries/papr_scm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/spufs/spufs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cbe_thermal.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cpufreq_spudemand.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cbe_powerbutton.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes 85xx/t1042rdb_diu.c and chrp/nvram.c which, although
they did not produce a warning with the powerpc allmodconfig
configuration, may cause this warning with other configurations.
Jeff Johnson [Sat, 15 Jun 2024 15:18:59 +0000 (08:18 -0700)]
KVM: PPC: add missing MODULE_DESCRIPTION() macros
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/test-guest-state-buffer.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/kvm-pr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/kvm-hv.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Hari Bathini [Mon, 1 Jul 2024 13:00:21 +0000 (18:30 +0530)]
powerpc/64s/radix/kfence: map __kfence_pool at page granularity
When KFENCE is enabled, total system memory is mapped at page level
granularity. But in radix MMU mode, ~3GB additional memory is needed
to map 100GB of system memory at page level granularity when compared
to using 2MB direct mapping.This is not desired considering KFENCE is
designed to be enabled in production kernels [1].
Mapping only the memory allocated for KFENCE pool at page granularity is
sufficient to enable KFENCE support. So, allocate __kfence_pool during
bootup and map it at page granularity instead of mapping all system
memory at page granularity.
Without patch:
# cat /proc/meminfo
MemTotal: 101201920 kB
With patch:
# cat /proc/meminfo
MemTotal: 104483904 kB
Note that enabling KFENCE at runtime is disabled for radix MMU for now,
as it depends on the ability to split page table mappings and such APIs
are not currently implemented for radix MMU.
All kfence_test.c testcases passed with this patch.
Michael Ellerman [Mon, 20 May 2024 06:26:47 +0000 (16:26 +1000)]
selftests/sigaltstack: Fix ppc64 GCC build
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Nathan Lynch [Mon, 3 Jun 2024 12:36:55 +0000 (07:36 -0500)]
powerpc/prom: Add CPU info to hardware description string later
cur_cpu_spec->cpu_name is appended to ppc_hw_desc before cur_cpu_spec
has taken on its final value. This is illustrated on pseries by
comparing the CPU name as reported at boot ("POWER8E (raw)") to the
contents of /proc/cpuinfo ("POWER8 (architected)"):
The 'nargs' and 'nret' locals come directly from a user-supplied
buffer and are used as indexes into a small stack-based array and as
inputs to copy_to_user() after they are subject to bounds checks.
Use array_index_nospec() after the bounds checks to clamp these values
for speculative execution.
Uwe Kleine-König [Mon, 24 Jun 2024 13:24:33 +0000 (15:24 +0200)]
macintosh: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries
PPC64 IOMMU API defines iommu_table_group_ops which handles DMA
windows for PEs, their ownership transfer, create/set/unset the TCE
tables for the Dynamic DMA wundows(DDW). VFIOS uses these APIs for
support on POWER.
The commit 9d67c9433509 ("powerpc/iommu: Add "borrowing"
iommu_table_group_ops") implemented partial support for this API with
"borrow" mechanism wherein the DMA windows if created already by the
host driver, they would be available for VFIO to use. Also, it didn't
have the support to control/modify the window size or the IO page
size.
The current patch implements all the necessary iommu_table_group_ops
APIs there by avoiding the "borrrowing". So, just the way it is on the
PowerNV platform, with this patch the iommu table group ownership is
transferred to the VFIO PPC subdriver, the iommu table, DMA windows
creation/deletion all driven through the APIs.
The pSeries uses the query-pe-dma-window, create-pe-dma-window and
reset-pe-dma-window RTAS calls for DMA window creation, deletion and
reset to defaul. The RTAs calls do show some minor differences to the
way things are to be handled on the pSeries which are listed below.
* On pSeries, the default DMA window size is "fixed" cannot be custom
sized as requested by the user. For non-SRIOV VFs, It is fixed at 2GB
and for SRIOV VFs, its variable sized based on the capacity assigned
to it during the VF assignment to the LPAR. So, for the default DMA
window alone the size if requested less than tce32_size, the smaller
size is enforced using the iommu table->it_size.
* The DMA start address for 32-bit window is 0, and for the 64-bit
window in case of PowerNV is hardcoded to TVE select (bit 59) at 512PiB
offset. This address is returned at the time of create_table() API call
(even before the window is created), the subsequent set_window() call
actually opens the DMA window. On pSeries, the DMA start address for
32-bit window is known from the 'ibm,dma-window' DT property. However,
the 64-bit window start address is not known until the create-pe-dma
RTAS call is made. So, the create_table() which returns the DMA window
start address actually opens the DMA window and returns the DMA start
address as returned by the Hypervisor for the create-pe-dma RTAS call.
* The reset-pe-dma RTAS call resets the DMA windows and restores the
default DMA window, however it does not clear the TCE table entries
if there are any. In case of ownership transfer from platform domain
which used direct mapping, the patch chooses remove-pe-dma instead of
reset-pe for the 64-bit window intentionally so that the
clear_dma_window() is called.
Other than the DMA window management changes mentioned above, the
patch also brings back the userspace view for the single level TCE
as it existed before commit 090bad39b237a ("powerpc/powernv: Add
indirect levels to it_userspace") along with the relavent
refactoring.
vfio/spapr: Always clear TCEs before unsetting the window
The PAPR expects the TCE table to have no entries at the time of
unset window(i.e. remove-pe). The TCE clear right now is done
before freeing the iommu table. On pSeries, the unset window
makes those entries inaccessible to the OS and the H_PUT/GET calls
fail on them with H_CONSTRAINED.
On PowerNV, this has no side effect as the TCE clear can be done
before the DMA window removal as well.
powerpc/pseries/iommu: Use the iommu table[0] for IOV VF's DDW
This patch basically brings consistency with PowerNV approach
to use the first freely available iommu table when the default
window is removed.
The pSeries iommu code convention has been that the table[0] is
for the default 32 bit DMA window and the table[1] is for the
64 bit DDW.
With VFs having only 1 DMA window, the default has to be removed
for creating the larger DMA window. The existing code uses the
table[1] for that, while marking the table[0] as NULL. This is
fine as long as the host driver itself uses the device.
For the VFIO user, on pSeries there is no way to skip table[0]
as the VFIO subdriver uses the first freely available table.
The window 0, when created as 64-bit DDW in that context would
still be on table[0], as the maximum number of windows is 1.
This won't have any impact for the host driver as the table is
fetched from the device's iommu_table_base.
powerpc/pseries/iommu: Fix the VFIO_IOMMU_SPAPR_TCE_GET_INFO ioctl output
The ioctl VFIO_IOMMU_SPAPR_TCE_GET_INFO is not reporting the
actuals on the platform as not all the details are correctly
collected during the platform probe/scan into the iommu_table_group.
Collect the information during the device setup time as the DMA
window property is already looked up on parent nodes anyway.
powerpc/iommu: Move pSeries specific functions to pseries/iommu.c
The PowerNV specific table_group_ops are defined in powernv/pci-ioda.c.
The pSeries specific table_group_ops are sitting in the generic powerpc
file. Move it to where it actually belong(pseries/iommu.c).
The functions are currently defined even for CONFIG_PPC_POWERNV
which are unused on PowerNV.
Only code movement, no functional changes intended.
Sourabh Jain [Fri, 10 May 2024 10:22:35 +0000 (15:52 +0530)]
powerpc/kexec_file: fix cpus node update to FDT
While updating the cpus node, commit 40c753993e3a ("powerpc/kexec_file:
Use current CPU info while setting up FDT") first deletes all subnodes
under the /cpus node. However, while adding sub-nodes back, it missed
adding cpus subnodes whose device_type != "cpu", such as l2-cache*,
l3-cache*, ibm,powerpc-cpu-features.
Fix this by only deleting cpus sub-nodes of device_type == "cpus" and
then adding all available nodes with device_type == "cpu".
Sourabh Jain [Fri, 10 May 2024 10:22:34 +0000 (15:52 +0530)]
powerpc/kexec_file: fix extra size calculation for kexec FDT
While setting up the FDT for kexec, CPU nodes that are added after the
system boots and reserved memory ranges are incorporated into the
initial_boot_params (base FDT).
However, they are not taken into account when determining the additional
size needed for the kexec FDT. As a result, kexec fails to load,
generating the following error:
[1116.774451] Error updating memory reserve map: FDT_ERR_NOSPACE
kexec_file_load failed: No such process
Therefore, consider the extra size for CPU nodes added post-system boot
and reserved memory ranges while preparing the kexec FDT.
While adding a new parameter to the setup_new_fdt_ppc64 function, it was
noticed that there were a couple of unused parameters, so they were
removed.
Anjali K [Tue, 28 May 2024 04:03:56 +0000 (09:33 +0530)]
powerpc/perf: Set cpumode flags using sample address
Currently in some cases, when the sampled instruction address register
latches to a specific address during sampling, the privilege bits
captured in the sampled event register are incorrect.
For example, a snippet from the perf report on a power10 system is:
perf_get_misc_flags() function looks at the privilege bits to return
the corresponding flags to be used for the address symbol and these
privilege bit details are read from the sampled event register. In the
above snippet, address "0x00007fff9f94a02c" is shown as "k" (kernel) due
to the incorrect privilege bits captured in the sampled event register.
To address this case check whether the sampled address is in the kernel
area. Since this is specific to the latest platform, a new pmu flag
is added called "PPMU_P10" and is used to contain the proposed fix.
PPMU_P10_DD1 marked events are also included under PPMU_P10, hence
remove the code specific to PPMU_P10_DD1 marked events.
Signed-off-by: Anjali K <anjalik@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com <mailto:atrajeev@linux.vnet.ibm.com>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240528040356.2722275-1-anjalik@linux.ibm.com
Celeste Liu [Thu, 30 May 2024 11:19:52 +0000 (19:19 +0800)]
powerpc/configs: drop RT_GROUP_SCHED=y from ppc6xx_defconfig
Commit 6e5f1537833a ("powerpc: Add a 6xx defconfig") said it was copied
from fedore's ppc32 defconfig, but at least since 2015-06-10, Fedora has
dropped this option.[1]
For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it
needs an RT budget assigned, otherwise the processes in it will not be able to
get RT at all. The problem with RT group scheduling is that it requires the
budget assigned but there's no way we could assign a default budget, since the
values to assign are both upper and lower time limits, are absolute, and need to
be sum up to < 1 for each individal cgroup. That means we cannot really come up
with values that would work by default in the general case.[1]
For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller
can only be enabled when all RT processes are in the root cgroup. But it will
lose the benefits of cgroup v2 if all RT process were placed in the same cgroup.
KVM: PPC: Book3S HV: Add one-reg interface for HASHPKEYR register
The patch adds a one-reg register identifier which can be used to
read and set the virtual HASHPKEYR for the guest during enter/exit
with KVM_REG_PPC_HASHPKEYR. The specific SPR KVM API documentation
too updated.
KVM: PPC: Book3S HV: Add one-reg interface for HASHKEYR register
The patch adds a one-reg register identifier which can be used to
read and set the virtual HASHKEYR for the guest during enter/exit
with KVM_REG_PPC_HASHKEYR. The specific SPR KVM API documentation
too updated.
KVM: PPC: Book3S HV: Add one-reg interface for DEXCR register
The patch adds a one-reg register identifier which can be used to
read and set the DEXCR for the guest during enter/exit with
KVM_REG_PPC_DEXCR. The specific SPR KVM API documentation
too updated.
Doorbell emulation is broken for KVM on PAPR guests as support for DPDES
was not added in the initial patch series. Due to this, a KVM on PAPR
guest with SMT > 1 cannot be booted with the XICS interrupt controller
as doorbells are setup in the initial probe path when using XICS
(pSeries_smp_probe()).
Gautam Menghani [Wed, 5 Jun 2024 11:39:09 +0000 (17:09 +0530)]
KVM: PPC: Book3S HV nestedv2: Add DPDES support in helper library for Guest state buffer
Add support for using DPDES in the library for using guest state
buffers. DPDES support is needed for enabling usage of doorbells in a L2
KVM on PAPR guest.
Fixes: 6ccbbc33f06a ("KVM: PPC: Add helper library for Guest State Buffers") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Gautam Menghani <gautam@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240605113913.83715-2-gautam@linux.ibm.com
Haren Myneni [Tue, 16 Jan 2024 05:59:10 +0000 (21:59 -0800)]
powerpc/pseries/vas: Use usleep_range() to support HCALL delay
VAS allocate, modify and deallocate HCALLs returns
H_LONG_BUSY_ORDER_1_MSEC or H_LONG_BUSY_ORDER_10_MSEC for busy
delay and expects OS to reissue HCALL after that delay. But using
msleep() will often sleep at least 20 msecs even though the
hypervisor suggests OS reissue these HCALLs after 1 or 10msecs.
The open and close VAS window functions hold mutex and then issue
these HCALLs. So these operations can take longer than the
necessary when multiple threads issue open or close window APIs
simultaneously, especially might affect the performance in the
case of repeat open/close APIs for each compression request.
Multiple tasks can open / close VAS windows at the same time
which depends on the available VAS credits. For example, 240
cores system provides 4800 VAS credits. It means 4800 tasks can
execute open VAS windows HCALLs with the mutex. Since each
msleep() will often sleep more than 20 msecs, some tasks are
waiting more than 120 secs to acquire mutex. It can cause hung
traces for these tasks in dmesg due to mutex contention around
open/close HCALLs.
Instead of msleep(), use usleep_range() to ensure sleep with
the expected value before issuing HCALL again. So since each
task sleep 10 msecs maximum, this patch allow more tasks can
issue open/close VAS calls without any hung traces in the
dmesg.
Signed-off-by: Haren Myneni <haren@linux.ibm.com> Suggested-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240116055910.421605-1-haren@linux.ibm.com
Nilay Shroff [Fri, 17 May 2024 14:25:23 +0000 (19:55 +0530)]
powerpc/numa: Online a node if PHB is attached.
In the current design, a numa-node is made online only if that node is
attached to cpu/memory. With this design, if any PCI/IO device is found
to be attached to a numa-node which is not online then the numa-node
id of the corresponding PCI/IO device is set to NUMA_NO_NODE(-1). This
design may negatively impact the performance of PCIe device if the
numa-node assigned to PCIe device is -1 because in such case we may not
be able to accurately calculate the distance between two nodes.
The multi-controller NVMe PCIe disk has an issue with calculating the
node distance if the PCIe NVMe controller is attached to a PCI host
bridge which has numa-node id value set to NUMA_NO_NODE. This patch
helps fix this ensuring that a cpu/memory less numa node is made online
if it's attached to PCI host bridge.
Gaurav Batra [Tue, 14 May 2024 01:46:08 +0000 (20:46 -0500)]
powerpc/pseries/iommu: Split Dynamic DMA Window to be used in Hybrid mode
Dynamic DMA Window (DDW) supports TCEs that are backed by 2MB page
size. In most configurations, DDW is big enough to pre-map all of LPAR
memory for IO. Pre-mapping of memory for DMA results in improvements in
IO performance.
Persistent memory, vPMEM, can be assigned to an LPAR as well. vPMEM is
not contiguous with LPAR memory and usually is assigned at high memory
addresses. This makes is not possible to pre-map both vPMEM and LPAR
memory in the same DDW.
For a dedicated adapter this limitation is not an issue. Dedicated
adapters can have both Default DMA window, which is backed by 4K page
size and a DDW backed by 2MB page size TCEs. In this scenario, LPAR
memory is pre-mapped in the DDW. Any DMA going to the vPMEM is routed
via dynamically allocated TCEs in the default window.
The issue arises with SR-IOV adapters. There is only one DMA window -
either Default or DDW. If an LPAR has vPMEM assigned, memory is not
pre-mapped in the DDW since TCEs needs to be allocated for vPMEM as well.
In this case, DDW is created and TCEs are dynamically allocated for both
vPMEM and LPAR memory.
Today, DDW is only used in single mode - direct mapped TCEs or
dynamically mapped TCEs. This enhancement breaks a single DDW in 2
regions -
1. First region to pre-map LPAR memory
2. Second region to dynamically allocate TCEs for IO to vPMEM
The DDW is split only if it is big enough to pre-map complete LPAR
memory and still have some space left to dynamically map vPMEM. Maximum
size possible DDW is created as permitted by the Hypervisor.
Gautam Menghani [Mon, 20 May 2024 17:57:40 +0000 (23:27 +0530)]
KVM: PPC: Book3S HV nestedv2: Add support for reading VPA counters for pseries guests
PAPR hypervisor has introduced three new counters in the VPA area of
LPAR CPUs for KVM L2 guest (see [1] for terminology) observability - two
for context switches from host to guest and vice versa, and one counter
for getting the total time spent inside the KVM guest. Add a tracepoint
that enables reading the counters for use by ftrace/perf. Note that this
tracepoint is only available for nestedv2 API (i.e, KVM on PowerVM).
[1] Terminology:
a. L1 refers to the VM (LPAR) booted on top of PAPR hypervisor
b. L2 refers to the KVM guest booted on top of L1.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Gautam Menghani <gautam@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240520175742.196329-1-gautam@linux.ibm.com
Gautam Menghani [Tue, 14 May 2024 13:24:55 +0000 (18:54 +0530)]
powerpc/pseries: Remove unused cede related functions
Remove extended_cede_processor() and its helpers as
extended_cede_processor() has no callers since
commit 48f6e7f6d948("powerpc/pseries: remove cede offline state for CPUs")
Linus Torvalds [Sun, 2 Jun 2024 20:30:53 +0000 (13:30 -0700)]
Merge tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Linus Torvalds [Sun, 2 Jun 2024 16:32:34 +0000 (09:32 -0700)]
Merge tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
Linus Torvalds [Sun, 2 Jun 2024 16:15:28 +0000 (09:15 -0700)]
Merge tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
Linus Torvalds [Sun, 2 Jun 2024 00:34:35 +0000 (17:34 -0700)]
Merge tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
Linus Torvalds [Sun, 2 Jun 2024 00:05:00 +0000 (17:05 -0700)]
Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c89 ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
Linus Torvalds [Sat, 1 Jun 2024 21:35:57 +0000 (14:35 -0700)]
Merge tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
Linus Torvalds [Sat, 1 Jun 2024 16:33:55 +0000 (09:33 -0700)]
Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
Linus Torvalds [Sat, 1 Jun 2024 15:59:04 +0000 (08:59 -0700)]
Merge tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Linus Torvalds [Sat, 1 Jun 2024 15:53:39 +0000 (08:53 -0700)]
Merge tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
Linus Torvalds [Sat, 1 Jun 2024 15:28:24 +0000 (08:28 -0700)]
Merge tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Linus Torvalds [Fri, 31 May 2024 23:26:48 +0000 (16:26 -0700)]
Merge tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the weekly fixes. Lots of small fixes across the board, one
BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
mostly with small fixes to all the other drivers.
shmem:
- fix BUG_ON in COW handling
- warn when trying to pin imported objects
i915:
- fix a race in audio component by registering it later
- make DPT object unshrinkable to avoid shrinking when framebuffer
has not shrunk
- fix CCS id calculation to fix a perf regression
- fix selftest caching mode
- fix FIELD_PREP compiler warnings
- fix indefinite wait for GT wakeref release
- revert overeager multi-gt pm reference removal
xe:
- pcode polling timeout change
- fix for deadlocks for faulting VMs
- error-path lock imbalance fix
amdkfd:
- revert unused changes for certain 11.0.3 devices
- simplify APU VRAM handling
lima:
- fix dma_resv-related deadlock in object pin
msm:
- remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- fix dma_resv-related deadlock in object pin"
* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/msm: remove python 3.9 dependency for compiling msm
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
drm/amdgpu: Make CPX mode auto default in NPS4
drm/amdkfd: simplify APU VRAM handling
Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
drm/amdgpu: silence UBSAN warning
drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
drm/i915: Fix audio component initialization
drm/i915/dpt: Make DPT object unshrinkable
drm/i915/gt: Fix CCS id's calculation for CCS mode setting
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
drm/i915/selftests: Set always_coherent to false when reading from CPU
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/i915/guc: avoid FIELD_PREP warning
drm/i915/gt: Disarm breadcrumbs if engines are already idle
Revert "drm/i915: Remove extra multi-gt pm-references"
...
Linus Torvalds [Fri, 31 May 2024 23:24:11 +0000 (16:24 -0700)]
Merge tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- sttcs: Fix property spelling
- intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor
- ltc2992: Fix memory leak
- dell-smm: Add Dell G15 5511 to fan control whitelist
* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (shtc1) Fix property misspelling
hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist
Linus Torvalds [Fri, 31 May 2024 23:17:40 +0000 (16:17 -0700)]
Merge tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
Linus Torvalds [Fri, 31 May 2024 23:12:54 +0000 (16:12 -0700)]
Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
Linus Torvalds [Fri, 31 May 2024 23:09:27 +0000 (16:09 -0700)]
Merge tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
Linus Torvalds [Fri, 31 May 2024 22:22:58 +0000 (15:22 -0700)]
Merge tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A couple of minor fixes for issues introduced in the 6.10 merge window:
- Ensure that all read/write ops have an appropriate cleanup handler
set (Breno)
- Regression for applications still doing multiple mmaps even if
FEAT_SINGLE_MMAP is set (me)
- Move kmsg inquiry setting above any potential failure point,
avoiding a spurious NONEMPTY flag setting on early error (me)"
* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
io_uring/net: assign kmsg inq/flags before buffer selection
io_uring/rw: Free iovec before cleaning async data
io_uring: don't attempt to mmap larger than what the user asks for
Linus Torvalds [Fri, 31 May 2024 19:11:44 +0000 (12:11 -0700)]
Merge tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes:
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes"
* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: seq: ump: Fix swapped song position pointer data
ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
ALSA: seq: Fix yet another spot for system message conversion
ALSA: ump: Set default protocol when not given explicitly
ALSA: ump: Don't accept an invalid UMP protocol number
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
ALSA: pcm: fix typo in comment
ALSA: ump: Don't clear bank selection after sending a program change
ALSA: seq: Fix incorrect UMP type for system messages
ALSA/hda: intel-dsp-config: reduce log verbosity
ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
ASoC: SOF: add missing MODULE_DESCRIPTION()
ASoC: SOF: reorder MODULE_ definitions
ASoC: SOF: AMD: group all module related information
...
Linus Torvalds [Fri, 31 May 2024 19:03:28 +0000 (12:03 -0700)]
Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- a use-after-free bugfix
- Kconfig fixes for randconfig builds
- allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for two new laptop/tablet models
* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
Linus Torvalds [Fri, 31 May 2024 18:52:06 +0000 (11:52 -0700)]
Merge tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
Linus Torvalds [Fri, 31 May 2024 18:45:41 +0000 (11:45 -0700)]
Merge tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
Thomas Gleixner [Thu, 30 May 2024 15:29:18 +0000 (17:29 +0200)]
x86/topology/intel: Unlock CPUID before evaluating anything
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c35e ("x86/cpu: Use common topology code for Intel") Reported-by: Peter Schneider <pschneider1968@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02e8 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Marco Patalano <mpatalan@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.org Signed-off-by: Kees Cook <kees@kernel.org>
Mickaël Salaün [Thu, 16 May 2024 18:19:35 +0000 (20:19 +0200)]
selftests/landlock: Add layout1.refer_mount_root
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Mickaël Salaün [Thu, 16 May 2024 18:19:34 +0000 (20:19 +0200)]
landlock: Fix d_parent walk
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Cc: stable@vger.kernel.org Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER") Closes: https://lore.kernel.org/r/000000000000553d3f0618198200@google.com Link: https://lore.kernel.org/r/20240516181935.1645983-2-mic@digikod.net
[mic: Fix commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net>
Niklas Cassel [Thu, 30 May 2024 21:27:04 +0000 (23:27 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Tim Teichmann <teichmanntim@outlook.de> Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/ Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Thu, 30 May 2024 21:32:44 +0000 (23:32 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Thu, 30 May 2024 21:28:17 +0000 (23:28 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Aarrayy <lp610mh@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Phil Auld [Thu, 30 May 2024 18:15:48 +0000 (14:15 -0400)]
sched/x86: Export 'percpu arch_freq_scale'
Commit:
7bc263840bc3 ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Jeff Johnson [Thu, 30 May 2024 20:12:03 +0000 (13:12 -0700)]
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-v1-1-e45ffa8af99f@quicinc.com
Takashi Iwai [Fri, 31 May 2024 07:51:07 +0000 (09:51 +0200)]
ALSA: seq: ump: Fix swapped song position pointer data
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
projects / thirdparty / linux.git / log
