David M. Lee [Wed, 5 Jun 2013 21:14:03 +0000 (21:14 +0000)]
Fixed refcounting problems with chanspy AMI support.
The ast_multi_channel_blob_get_channel function does not bump the refcount on
the channel snapshot that it returns. This is typical for Stasis message
payloads, since being immutable means that the object won't get unreffed out
from underneath you.
The manager code for chanspy was unreffing the snapshots it got out of the
multi-channel blob, which was one unref too many.
David M. Lee [Wed, 5 Jun 2013 14:47:30 +0000 (14:47 +0000)]
Fixed a consistency problem with channel snapshot and endpoint state.
When channels are added to an endpoint, the code originally posted a channel
snapshot to the endoint's topic directly. Turns out, this is a bad idea.
This causes the endpoint to see an inconsistent view of the channel, since it
will later receive in-flight messages with old channel snapshots.
This patch instead just publishes channel state immediately after setting up
the forward to the endpoint's topic. This gives the endpoints a consistent
view of the channel's state.
David M. Lee [Mon, 3 Jun 2013 15:57:42 +0000 (15:57 +0000)]
Correct autoconf script for finding UUID support.
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
Kinsey Moore [Fri, 31 May 2013 19:00:51 +0000 (19:00 +0000)]
Refactor code and fix a reference leak
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
Kinsey Moore [Fri, 31 May 2013 12:27:29 +0000 (12:27 +0000)]
Add snapshot cache that indexes by channel name
This adds a new channel snapshot cache in parallel to the existing
cache; the difference being that it indexes the channel snapshots by
channel name instead of channel uniqueid.
David M. Lee [Thu, 30 May 2013 17:05:53 +0000 (17:05 +0000)]
Avoid unnecessary cleanups during immediate shutdown
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Richard Mudgett [Wed, 29 May 2013 20:24:18 +0000 (20:24 +0000)]
Fix segfault when dealing with chan_agent channels.
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
........
Merged revisions 390044 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 390047 from http://svn.asterisk.org/svn/asterisk/branches/11
Matthew Jordan [Wed, 29 May 2013 03:22:04 +0000 (03:22 +0000)]
Pack the right number of items into the status and receive fax blobs
The code was still attempting to pack an additional item into the blobs
that didn't exist. Crashes ensued. This patch modifies the publishing of
these messages so that the correct number of items are packed in the JSON.
Kinsey Moore [Wed, 29 May 2013 02:26:17 +0000 (02:26 +0000)]
Resolve a merge conflict
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
Jonathan Rose [Tue, 28 May 2013 17:47:29 +0000 (17:47 +0000)]
Fix a memory copying bug in slinfactory which was causing mixmonitor issues.
Reported by: Michael Walton
Tested by: Jonathan Rose
Patches:
slinfactory.c.ASTERISK-21799.patch uploaded by Michael Walton (license 6502)
(closes issue ASTERISK-21799)
........
Merged revisions 389895 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 389896 from http://svn.asterisk.org/svn/asterisk/branches/11
Mark Michelson [Tue, 28 May 2013 14:45:31 +0000 (14:45 +0000)]
Adds support for a core attended transfer function plus adds some hiding of masquerades.
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
Matthew Jordan [Mon, 27 May 2013 01:33:12 +0000 (01:33 +0000)]
Fix some more fax test errors due to needing the peer in a bridge
In r389799, a number of fax errors in gateway mode were fixed by using the
appropriate function to get a channel's peer while in a bridge. This patch
does two things:
(1) It uses the same function in res_fax_spandsp while starting the fax
gateway. Without this, the fax gateway will not actually start up, as
res_fax_spandsp also must inspect the channel's peer in a two-party
bridge
(2) It refactors some ao2 objects in sendfax_exec to use RAII_VAR. This was
reverted in r389799 as some off nominal paths were getting hit without
the fix in (1) that indicated an ao2 object issue; this turned out to
be a red herring (which is an odd phrase)
Matthew Jordan [Mon, 27 May 2013 00:06:40 +0000 (00:06 +0000)]
Initialize the message type before the topic
Caching topics will during initialization attempt to reference
their message type. The message type therefore has to be
initialized prior to the topic to prevent the dreaded assertion.
Matthew Jordan [Sun, 26 May 2013 16:49:28 +0000 (16:49 +0000)]
Fix a few fax gateway failures
Fax gateway requires knowledge of a channel's peer in a bridge. This patch
now uses the supported mechanisms to get this information.
This is acceptable for a few reasons:
* Fax gateway can only ever work in a 2-party bridge
* Fax gateway cannot work when not in a bridge
* Fax gateway cannot work without knowledge of the capabilities of both
channels in the fax operation (it is, after all, a gateway)
Matthew Jordan [Sun, 26 May 2013 04:47:17 +0000 (04:47 +0000)]
Fix a variety of memory corruption/assertion errors
* Initialize a Stasis-Core message type prior to initializing a caching topic.
The caching topic will attempt to use the message type.
* Don't attempt to publish Stasis-Core messages from remote console connections.
They aren't the main process; they shouldn't attempt to behave as it (they also
don't have the infrastructure to do so)
* Don't treat a JSON object as an ao2 object (whoops)
* In asterisk.c, ref bump the JSON even package that is distributed with the
event meta data. The callers assume that they own the reference, and the packing
routine steals references.
Matthew Jordan [Fri, 24 May 2013 20:44:07 +0000 (20:44 +0000)]
Migrate a large number of AMI events over to Stasis-Core
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Matthew Jordan [Fri, 24 May 2013 11:57:48 +0000 (11:57 +0000)]
Print all logger messages on shutdown
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
Jonathan Rose [Thu, 23 May 2013 20:48:41 +0000 (20:48 +0000)]
res_parking: Fix some simple bugs
Both of them are covered in the dynamic parking review on
https://reviewboard.asterisk.org/r/2550 - Remove unref against
parking lot that the bridge did on dissolve since the reference
wasn't taken in the first place. On a swap, reapply bridge roles
in order to get music on hold and such playing on the channel that
swaps into the bridge.
Joshua Colp [Thu, 23 May 2013 20:25:48 +0000 (20:25 +0000)]
Fix a crash due to the INVITE session being destroyed before the session.
This change ensures that the INVITE session remains valid for the lifetime
of the session object itself by increasing the session count on the dialog that
the INVITE session is allocated from. Once this reaches zero (normally as a result
of decrementing it within the session destructor) the dialog, and INVITE session,
are destroyed.
David M. Lee [Thu, 23 May 2013 20:21:16 +0000 (20:21 +0000)]
This patch adds support for controlling a playback operation from the
Asterisk REST interface.
This adds the /playback/{playbackId}/control resource, which may be
POSTed to to pause, unpause, reverse, forward or restart the media
playback.
Attempts to control a playback that is not currently playing will
either return a 404 Not Found (because the playback object no longer
exists) or a 409 Conflict (because the playback object is still in the
queue to be played).
This patch also adds skipms and offsetms parameters to the
/channels/{channelId}/play resource.
David M. Lee [Thu, 23 May 2013 20:11:35 +0000 (20:11 +0000)]
This patch implements the REST API's for POST /channels/{channelId}/play
and GET /playback/{playbackId}.
This allows an external application to initiate playback of a sound on a
channel while the channel is in the Stasis application.
/play commands are issued asynchronously, and return immediately with
the URL of the associated /playback resource. Playback commands queue up,
playing in succession. The /playback resource shows the state of a
playback operation as enqueued, playing or complete. (Although the
operation will only be in the 'complete' state for a very short time,
since it is almost immediately freed up).
David M. Lee [Wed, 22 May 2013 19:15:16 +0000 (19:15 +0000)]
Fixed startup race condition which caused occasional stasis_mwi_state_type assertions.
The caching topic (which refers to the message type) was created before the
message type. If the initial subscription message gets processed before
the type can be initialized, the assertion about using an uninitialized type
fires.
Matthew Jordan [Tue, 21 May 2013 18:45:57 +0000 (18:45 +0000)]
Raise the ConfBridgeMute/Unmute events when a CLI or AMI action triggers the change
New in 12 are the ConfBridgeMute/Unmute events, which are triggered when a user
changes their mute/unmute state. This was typically triggered when a user hit a
DTMF key that triggered the mute/unmute menu handler. Forgotten in this is when an
AMI action or CLI command triggers the mute/unmute. This patch now raises the
events in those situations as well.
Richard Mudgett [Tue, 21 May 2013 18:00:22 +0000 (18:00 +0000)]
Merge in the bridge_construction branch to make the system use the Bridging API.
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
Matthew Jordan [Mon, 20 May 2013 19:24:16 +0000 (19:24 +0000)]
Set the AST_CDR_FLAG_ORIGINATED flag on originated channel's CDRs
This may alleviate some of the CDR woes with originated channels, as CDRs
do like to know when a channel was originated. Eventually this will get
converted to be a channel flag, so its location is still good to know
post the great CDR shakeup of 2013.
Kinsey Moore [Sun, 19 May 2013 17:45:42 +0000 (17:45 +0000)]
Add base XML documentation for res_sip
Thanks to Brad Latus, this patch adds a significant amount much-needed
documentation to res_sip. It should cover all existing configuration
options currently in Asterisk trunk.
Damien Wedhorn [Sat, 18 May 2013 23:20:53 +0000 (23:20 +0000)]
Add call forward no answer to skinny and cleanup general callfwd handling.
CallforwardNoAnswer uses a sched to determine when to forward the call.
Defaults to 20secs but configurable in skinny.conf.
Adds dialType to each subchannel structure to be used to differentiate
between normal dials that result in a call being placed (default) and
other uses for the skinny_dialer (such as cfwd digit collection).
Restructured all cfwd handling to use this new arrangement.
David M. Lee [Fri, 17 May 2013 21:10:32 +0000 (21:10 +0000)]
Fix shutdown assertions in stasis-core
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Michael L. Young [Fri, 17 May 2013 20:24:56 +0000 (20:24 +0000)]
Remove Character Limit On "inkeys" For IAX2
Currently, the buffer for processing "inkeys" is limited to 256 characters. If
the user has many keys and the names of those key files are long, the 256
character limit is not enough.
* Change inkeys buffer to be dynamic
(closes issue ASTERISK-21398)
Reported by: Pavel Kopchyk
Tested by: Pavel Kopchyk, Michael L. Young
Patches:
asterisk-21398-iax2-inkeys-dynamic-buffer_v3.diff
by Michael L. Young (license 5026)
Matthew Jordan [Fri, 17 May 2013 17:43:58 +0000 (17:43 +0000)]
Publish the outbound channel's application/data when dialing
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
Kevin Harwell [Wed, 15 May 2013 15:58:56 +0000 (15:58 +0000)]
Fix for segfault in __ast_rwlock_destroy with DEBUG_THREADS
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
Jason Parker [Wed, 15 May 2013 15:03:40 +0000 (15:03 +0000)]
Fix VM snapshot handling for combined INBOX.
The snapshot API contains an option that allow for combining of new
and old messages within a single snapshot. New messages, however,
include options beyond just 'INBOX' - it also includes the Urgent
folder. A previous patch that combined INBOX and Urgent accidentally
impacted snapshots that attempted to gain messages from just the Old
folder. This patch fixes the snapshot gathering such that the API
returns the appropriate messages for the folder selected, with and
without the combine option.
This should make it more clear about what's happening.
Kinsey Moore [Tue, 14 May 2013 12:47:52 +0000 (12:47 +0000)]
Move JSON event generators into separate modules
This moves the JSON event generators out of the Stasis-HTTP modules and
into standalone JSON-related counterparts so that Stasis-HTTP and
res_stasis can depend on them without creating dependency cycles. This
also provides a future location for Swagger Model validator functions
once the generators for that code are written.
Michael L. Young [Mon, 13 May 2013 21:21:03 +0000 (21:21 +0000)]
Fix Missing CALL-ID When Logging Through Syslog
The CALL-ID (ie [C-00000074]) is missing when logging to syslog. This was just
an oversight when this feature was added.
* Add CALL-IDs when using syslog
(closes issue ASTERISK-21430)
Reported by: Nikola Ciprich
Tested by: Nikola Ciprich, Michael L. Young
Patches:
asterisk-21430-syslog-callid_trunk.diff by Michael L. Young (license 5026)
Michael L. Young [Mon, 13 May 2013 21:07:02 +0000 (21:07 +0000)]
Fix Crash Caused By One-way Audio With auto_* NAT Settings Fix
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Richard Mudgett [Fri, 10 May 2013 22:12:52 +0000 (22:12 +0000)]
Allow mISDN to send PROGRESS messsage.
* Made isdn_msg_parser.c build a progress message with the mandatory
progress indicator IE. (The mISDNuser NT state machine rejected sending
the incomplete message.)
Note: The associated mISDN and mISDNuser patches respectively are viewable
here:
http://svnview.digium.com/svn/thirdparty?view=rev&rev=200
http://svnview.digium.com/svn/thirdparty?view=rev&rev=201
Michael L. Young [Fri, 10 May 2013 20:28:18 +0000 (20:28 +0000)]
Fix Finding Extensions With Patterns Using ODBC Realtime
After the merge of support for the realtime sorcery module, extensions that
contained a pattern were not being found through odbc realtime. It was tracked
down to this one line that was advancing to the next variable list before it
should have been. The removal of this one line fixes this.
Tested this fix on my machine.
Received confirmation that this is the right fix from file on IRC.
David M. Lee [Fri, 10 May 2013 17:12:57 +0000 (17:12 +0000)]
Address unload order issues for res_stasis* modules
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Kinsey Moore [Fri, 10 May 2013 13:13:06 +0000 (13:13 +0000)]
Add channel events for res_stasis apps
This change adds a framework in res_stasis for handling events from
channel topics. JSON event generation and validation code is created
from event documentation in rest-api/api-docs/events.json to assist in
JSON event generation, ensure consistency, and ensure that accurate
documentation is available for ALL events that are received by
res_stasis applications.
The userevent application has been refactored along with the code that
handles userevent channel blob events to pass the headers as key/value
pairs in the JSON blob. As a side-effect, app_userevent now handles
duplicate keys by overwriting the previous value.
Fix The Payload Being Set On CN Packets And Do Not Set Marker Bit
When we send out a CN packet (for instance, in the case of using rtpkeepalives),
we are not setting the payload code properly. Also, we are setting the marker
bit when we shouldn't be according to RFC 3389, section 4.
AST_RTP_CN is not defined by AST_FORMAT codes. Therefore, we should be using
ast_rtp_codecs_payload_code() rather than ast_rtp_codecs_payload_lookup().
11 and trunk already use the appropriate function.
* In 1.8, use ast_rtp_codecs_payload_code()
* Remove the setting of the marker bit
* Fix the debug message by incrementing the seqno after the debug message is set
in order to display the correct seqno that was sent out
(closes issue ASTERISK-21246)
Reported by: Peter Katzmann
Tested by: Peter Katzmann, Michael L. Young
Patches:
asterisk-21246-rtp-cng-payload-error_1.8_v2.diff
uploaded by Michael L. Young (license 5026)
projects / thirdparty / asterisk.git / log
