Jouni Malinen [Wed, 14 Feb 2018 10:40:33 +0000 (12:40 +0200)]
OpenSSL: Fix EAP-FAST with OpenSSL 1.1.1-pre1
TLS v1.3 needs to be explicitly disabled to allow cipher suite selection
for EAP-FAST to work with OpenSSL builds that include TLS v1.3 support.
Without this, OpenSSL refuses to generate ClientHello due to the cipher
suite list including only ciphers allowed with older versions than TLS
v1.3.
Jouni Malinen [Sat, 10 Feb 2018 10:42:00 +0000 (12:42 +0200)]
DPP: Use wildcard BSSID in GAS query frames
Force use of the wildcard BSSID address in GAS query frames with DPP
regardless of how the gas_address3 configuration parameter is set. DPP
specification mandates this and the use of GAS here is really outside
the context of a BSS, so using the wildcard BSSID makes sense even for
the corner case of Configurator running on a known AP (where IEEE 802.11
standard would allow the BSSID of the AP to be used).
Jouni Malinen [Sat, 10 Feb 2018 10:16:53 +0000 (12:16 +0200)]
nl80211: Do not try to add too large NL80211_ATTR_PMK for set/del PMKSA
The current cfg80211 limit for the maximum NL80211_ATTR_PMK length is
48, so anything larger than that will result in the operation completely
failing. Since the PMKSA entries can be used without the PMK for most
purposes (the main use case for PMK currently is offloaded FILS
authentication), try to go ahead by configuring only the PMKID for the
case where 64-octet PMK is needed (which is currently limited to only
DPP with NIST P-521 and brainpoolP512r1 curves). This can fix DPP
connections with drivers that expect to get the PMKID through this
interface while still leaving the actual 4-way handshake for user space.
wpadebug: Add support for QR Code scanning and display via zxing
Enhance wpadebug application to support scanning and displaying of QR
codes. This depends on a third-party source: zxing
(https://github.com/zxing/zxing).
Shell command to launch scanner/viewer via wpadebug is:
>adb root
>adb shell
Tamizh chelvam [Thu, 11 Jan 2018 09:59:03 +0000 (15:29 +0530)]
hostapd: Dynamic MAC ACL management over control interface
Previously, MAC ACL could be modified only through file operations
(modify accept/deny_mac_file and reload it to hostapd). Extend this to
allow MAC ACL to be modified and displayed through new control interface
commands:
Jouni Malinen [Wed, 7 Feb 2018 16:03:58 +0000 (18:03 +0200)]
DPP: Fix GAS query removal race condition on DPP_STOP_LISTEN
If a DPP_STOP_LISTEN call happens to be received when there is a pending
gas-query radio work that has not yet been started, it was possible for
gas_query_stop() to go through gas_query_done() processing with
gas->work == NULL and that ended up with the pending GAS query getting
freed without removing the pending radio work that hold a reference to
the now freed memory. Fix this by removing the pending non-started radio
work for the GAS query in this specific corner case.
Jouni Malinen [Wed, 7 Feb 2018 15:09:20 +0000 (17:09 +0200)]
tests: Make dpp_qr_code_curve_select more robust
Wait for the configuration exchange to complete before issuing the
DPP_STOP_LISTEN command to avoid confusing sequence of operation between
the ongoing and immediately following DPP exchanges.
Jouni Malinen [Wed, 7 Feb 2018 14:56:43 +0000 (16:56 +0200)]
DPP: PKEX initiation on other bands
Add support for wpa_supplicant to try to initiate PKEX on 5 GHz and 60
GHz bands in addition to the previously available 2.4 GHz case. If no
response from a peer device is seen on the 2.4 GHz band (channel 6) for
the five attempts, try the other PKEX channels (5 GHz channels 44 and
149; and 60 GHz channel 2) if they are supported and allowed for
initiating radiation.
Jouni Malinen [Wed, 7 Feb 2018 11:45:48 +0000 (13:45 +0200)]
tests: Make owe_transition_mode_multi_bss more robust
Fix bssid2 value to make scanning more reliable for the second OWE BSS.
In addition, reorder the STA status checks to happen before the data
connectivity check to get more accurate failure reason into the log if
the test case fails.
Jouni Malinen [Wed, 7 Feb 2018 10:34:41 +0000 (12:34 +0200)]
ieee802_11_mgmt: Handle frame info more consistently
Check for the fi parameter to be non-NULL before trying to fetch the
ssi_signal information similarly to how the fi->freq was already
handled. While the meta information is supposed to be available, it
looks like there is at least one corner case where fi == NULL could be
used (Authentication frame reprocessing after RADIUS-based ACL).
Define new QCA vendor sub command for wifi test configuration
Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.
Jouni Malinen [Tue, 6 Feb 2018 18:54:55 +0000 (20:54 +0200)]
DPP: Require use of PMF for DPP AKM
Previously, wpa_supplicant set PMF as optional for the DPP AKM since
there was no clear statement about this requirement in the tech spec.
Now that this requirement has been added, update the implementation to
match. In addition, set ssid->ieee80211w using the actual enum
mfp_options values instead of magic constants to make this a bit more
readable.
Ashok Ponnaiah [Tue, 6 Feb 2018 18:20:22 +0000 (20:20 +0200)]
OWE: Support DH groups 20 and 21 with driver-SME/MLME
This was already the case with the hostapd-based SME/MLME
implementation, but the OWE DH Param element construction for the
driver-based SME/MLME needed a matching change to set the group
properly.
Michal Kazior [Thu, 1 Feb 2018 11:03:28 +0000 (12:03 +0100)]
hostapd: Fix wpa_psk_file support for FT-PSK
For FT-PSK sm->xxkey was populated with only the first password on the
linked list (i.e., last matching password in the wpa_psk_file) in
INITPSK. This caused only that password to be recognized and accepted.
All other passwords were not verified properly and subsequently
prevented clients from connecting.
Hostapd would report:
Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: received EAPOL-Key frame (2/4 Pairwise)
Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: invalid MIC in msg 2/4 of 4-Way Handshake
Jan 30 12:55:45 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout
Signed-off-by: Michal Kazior <michal@plumewifi.com>
Jouni Malinen [Sun, 4 Feb 2018 10:20:13 +0000 (12:20 +0200)]
wpa_supplicant: Fix parsing errors on additional config file
If the -I<config> argument is used and the referenced configuration file
cannot be parsed, wpa_config_read() ended up freeing the main
configuration data structure and that resulted in use of freed memory in
such an error case. Fix this by not freeing the main config data and
handling the error case in the caller.
Dmitry Shmidt [Thu, 1 Feb 2018 00:34:54 +0000 (00:34 +0000)]
wpa_supplicant: Free config only if it was allocated in same call
If option -I:config points to a non-existing file, the the previously
allocated config must not be freed. Avoid use of freed memory in such an
error case by skipping the incorrect freeing operation.
Adiel Aloni [Tue, 30 Jan 2018 11:10:10 +0000 (13:10 +0200)]
tests: Enable device PS before sending PS-Poll
Linux kernel commit c9491367b759 ("mac80211: always update the PM state
of a peer on MGMT / DATA frames") enforces the AP to check only
mgmt/data frames PM bit, and to update station's power save accordingly.
When sending only a PS-Poll (control frame) the AP will ignore the PM
bit. As the result, the partial virtual bitmap will not be updated, and
the test ap_open_disconnect_in_ps will fail on tshark check. Since the
test needs only the TIM to be updated, setting PS enabled will send NDP
that will signal that the station is sleeping. Sending PS-Poll to enable
power save is not correct, according to the following standard
statement: "A PS-Poll frame exchange does not necessarily result in an
Ack frame from the AP, so a non-AP STA cannot change power management
mode using a PS-Poll frame."
Jouni Malinen [Sun, 4 Feb 2018 09:55:01 +0000 (11:55 +0200)]
OWE: Fix association IEs for transition mode open AP connection
The special case of returning from wpa_supplicant_set_suites() when OWE
transition mode profile is used for an open association did not clear
the wpa_ie buffer length properly. This resulted in trying to use
corrupted IEs in the association request and failed association
(cfg80211 rejects the request or if the request were to go out, the AP
would likely reject it).
Simon Dinkin [Thu, 1 Feb 2018 15:12:03 +0000 (17:12 +0200)]
common: Fix the description of wpa_ctrl_request() function
The blocking timeout of this function was changed from 2 seconds to 10
seconds in this commit 1480633f ("Use longer timeout in
wpa_ctrl_request()"), but the description was never changed accordingly.
Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
David Messer [Wed, 31 Jan 2018 16:01:00 +0000 (11:01 -0500)]
Fix compiler issue with CONFIG_TESTING_OPTIONS
Use the preprocessor conditional "ifdef" instead of "if" before
CONFIG_TESTING_OPTIONS to prevent an issue on build systems that treat
undefined preprocessor identifiers as an error.
Signed-off-by: David Messer <david.messer@garmin.com>
Jouni Malinen [Sat, 3 Feb 2018 10:08:09 +0000 (12:08 +0200)]
wpa_cli: Fix cred_fields[] declaration
This was supposed to be an array of const-pointers to const-char; not
something duplicating const for char and resulting in compiler warnings
with more recent gcc versions.
Sunil Dutt [Thu, 1 Feb 2018 11:31:28 +0000 (17:01 +0530)]
SAE: Support external authentication offload for driver-SME cases
Extend the SME functionality to support the external authentication.
External authentication may be used by the drivers that do not define
separate commands for authentication and association
(~WPA_DRIVER_FLAGS_SME) but rely on wpa_supplicant's SME for the
authentication.
Sunil Dutt [Thu, 1 Feb 2018 07:15:41 +0000 (12:45 +0530)]
nl80211: Introduce the interface for external authentication
This command/event interface can be used by host drivers that do not
define separate commands for authentication and association but rely on
wpa_supplicant for the authentication (SAE) processing.
Guisen Yang [Thu, 1 Feb 2018 09:05:19 +0000 (17:05 +0800)]
Add new QCA vendor commands for thermal shutdown
Add new QCA vendor commands and attributes to get thermal information
and send thermal shutdown related commands. Indicates the driver to
enter the power saving mode or resume from the power saving mode based
on the given temperature and thresholds.
Ashok Ponnaiah [Tue, 30 Jan 2018 11:24:39 +0000 (16:54 +0530)]
OWE: Use PMKSA caching if available with driver AP MLME
If a matching PMKSA cache entry is present for an OWE client, use it and
do not go through DH while processing Association Rquest frame.
Association Response frame will identify the PMKID in such a case and DH
parameters won't be present.
Ashok Ponnaiah [Mon, 29 Jan 2018 16:11:03 +0000 (18:11 +0200)]
hostapd: Send broadcast Public Action frame with wildcard BSSID address
Send Public Action frames with wildcard BSSID when destination was
broadcast address. This is required for DPP PKEX where the recipients
may drop the frames received with different BSSID than the wildcard
address or the current BSSID.
Jouni Malinen [Sun, 21 Jan 2018 22:07:44 +0000 (00:07 +0200)]
FILS: Fix extended capability bit setting for FILS in AP mode
FILS capability bit setting could have ended up setting boths biths 72
(correct) and 64 (incorrect; part of Max Number of MSDUs In A-MSDU). Fix
this by adding the missing break to the switch statement.
Fixed: f55acd909e37 ("FILS: Set FILS Capability bit in management frames from AP") Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Fri, 8 Dec 2017 15:05:40 +0000 (17:05 +0200)]
EAP-SIM/AKA: Separate identity for MK derivation
This allows a separate configuration parameter (imsi_identity) to be
used in EAP-SIM/AKA/AKA' profiles to override the identity used in MK
derivation for the case where the identity is expected to be from the
last AT_IDENTITY attribute (or EAP-Response/Identity if AT_IDENTITY was
not used). This may be needed to avoid sending out an unprotected
permanent identity information over-the-air and if the EAP-SIM/AKA
server ends up using a value based on the real IMSI during the internal
key derivation operation (that does not expose the data to others).
Jouni Malinen [Sat, 13 Jan 2018 02:12:46 +0000 (04:12 +0200)]
DPP: Track M.x/N.x/L.x availability for ke derivation
This prevents an issue where duplicated Authentication Response frame
could have resulted in deriving a new ke value after M.x had already
been cleared. This would result in the following configuration exchange
failing. This could happen since many driver do not filter out
retransmitted Public Action frames and link layer. Furthermore, this
could have been used as a denial-of-service attack agains the DPP
exchange.
Jouni Malinen [Sat, 13 Jan 2018 01:56:26 +0000 (03:56 +0200)]
OWE: Allow station in transition mode to connect to an open BSS
If the OWE network profile matches an open network which does not
advertise OWE BSS, allow open connection. The new owe_only=1 network
profile parameter can be used to disable this transition mode and
enforce connection only with OWE networks.
Sunil Dutt [Thu, 21 Dec 2017 12:08:01 +0000 (17:38 +0530)]
Extend NUD Stats to collect the data packet statistics
This commit extends the existing QCA vendor specific NUD_STATS_GET/SET
interface to also collect the statistics of the data packets. The
intention here is to get more comprehensive information to detect the
network unreachability.
Jouni Malinen [Fri, 12 Jan 2018 18:55:33 +0000 (20:55 +0200)]
Copy WLAN-Reason-Code value from Access-Reject to Deauthentication
This makes hostapd use the WLAN-Reason-Code value from Access-Reject
when disconnecting a station due to IEEE 802.1X authentication failure.
If the RADIUS server does not include this attribute, the default value
23 (IEEE 802.1X authentication failed) is used. That value was the
previously hardcoded reason code.
Jouni Malinen [Fri, 12 Jan 2018 18:45:12 +0000 (20:45 +0200)]
RADIUS: Add WLAN-Reason-Code attribute to Access-Reject
Make the RADIUS server in hostapd add WLAN-Reason-Code attribute to all
Access-Reject messages generated based on EAP-Failure from the EAP
server. For now, the reason code value is set to 23 (IEEE 802.1X
authentication failed). This can be extending in future commits to cover
addition failure reasons.
HS 2.0: Set appropriate permission(s) for cert file/folders on Android
This commit adds additional permission to 'SP' and 'Cert' folders
which is needed to copy certificates from Cert to SP. Additionally,
this associates AID_WIFI group id with these folders.
Jouni Malinen [Thu, 11 Jan 2018 23:12:00 +0000 (01:12 +0200)]
Replace RSNE group key management mismatch status/reason codes
Use "cipher out of policy" value instead of invalid group cipher (which
is for the group data frame cipher) and management frame policy
violation (which is used for MFPC/MFPR mismatch).
Jouni Malinen [Mon, 8 Jan 2018 03:19:05 +0000 (05:19 +0200)]
DPP: Authentication exchange retries and channel iteration in hostapd
This extends hostapd with previoiusly implemented wpa_supplicant
functionality to retry DPP Authentication Request/Response and to
iterate over possible negotiation channels.
Jouni Malinen [Mon, 8 Jan 2018 01:37:48 +0000 (03:37 +0200)]
Report offchannel RX frame frequency to hostapd
Not all code paths for management frame RX reporting delivered the
correct frequency for offchannel RX cases. This is needed mainly for
Public Action frame processing in some special cases where AP is
operating, but an exchange is done on a non-operational channel. For
example, DPP Initiator role may need to do this.
Jouni Malinen [Thu, 4 Jan 2018 15:06:40 +0000 (17:06 +0200)]
tests: Enable and require PMF in SAE and OWE test cases with sigma_dut
All SAE and OWE associations are expected to require PMF to be
negotiated, so enable or require PMF in AP and STA configurations
accordingly to match the new sigma_dut behavior.
Jouni Malinen [Fri, 29 Dec 2017 10:01:22 +0000 (12:01 +0200)]
tests: GnuTLS configuration of intermediate CA certificate
GnuTLS seems to require the intermediate CA certificate to be included
both in the ca_cert and client_cert file for the cases of server and
client certificates using different intermediate CA certificates. Use
the user_and_ica.pem file with GnuTLS builds and reorder the
certificates in that file to make this work with GnuTLS.
Jouni Malinen [Thu, 28 Dec 2017 16:46:28 +0000 (18:46 +0200)]
GnuTLS: Suite B validation
This allows OpenSSL-style configuration of Suite B parameters to be used
in the wpa_supplicant network profile. 128-bit and 192-bit level
requirements for ECDHE-ECDSA cases are supported. RSA >=3K case is
enforced using GnuTLS %PROFILE_HIGH special priority string keyword.
Jouni Malinen [Thu, 28 Dec 2017 11:18:15 +0000 (13:18 +0200)]
GnuTLS: Make debug prints clearer for cert/key parsing
Indicate more clearly when the parsing succeeds to avoid ending the
debug prints with various internal GnuTLS internal error messages even
when the parsing actually succeeded in the end.
projects / thirdparty / hostap.git / log
