The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Normally, a bond uses the MAC address of the first added slave as the bond’s
MAC address. And the bond will set active slave’s MAC address to bond’s
address if fail_over_mac is set to none (0) or follow (2).
When the first slave is removed, the bond will still use the removed slave’s
MAC address, which can lead to a duplicate MAC address and potentially cause
issues with the switch. To avoid confusion, let's warn the user in all
situations, including when fail_over_mac is set to 2 or not in active-backup
mode.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250225033914.18617-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
To fix this, KFD create process move flush release work outside
kfd_process_mutex.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1. Signed-off-by: Kevin Krakauer <krakauer@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case health counter has not increased for few polling intervals, miss
counter will reach max misses threshold and health report will be
triggered for FW health reporter. In case syndrome found on same health
poll another health report will be triggered.
Avoid two health reports on same syndrome by marking this syndrome as
already known.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Apparently nobody can figure out where the old logic came from, but it
seems like it has never been actually used on any supported firmware to
this day. OSLog buffers were apparently never requested.
But starting with 13.3, we actually need this implemented properly for
MTP (and later AOP) to work, so let's actually do that.
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Increase the timeout for SDM (Secure device manager) data credits from
20ms to 40ms. Internal stress tests running at 500 loops failed with the
current timeout of 20ms. At the start of a FPGA configuration, the CVP
host driver reads the transmit credits from SDM. It then sends bitstream
FPGA data to SDM based on the total credits. Each credit allows the
CVP host driver to send 4kBytes of data. There are situations whereby,
the SDM did not respond in time during testing.
In preparation for adding support for newer DPI instances which
do support direct-pin but do not have any H_FRE_CON register,
like the one found in MT8195 and MT8188, add a branch to check
if the reg_h_fre_con variable was declared in the mtk_dpi_conf
structure for the probed SoC DPI version.
As a note, this is useful specifically only for cases in which
the support_direct_pin variable is true, so mt8195-dpintf is
not affected by any issue.
For sama7g5 and sama7d65 backup mode, we encountered a "ZQ calibrate error"
during recalibrating the impedance in BootStrap.
We found that the impedance value saved in at91_suspend_finish() before
the DDR entered self-refresh mode did not match the resistor values. The
ZDATA field in the DDR3PHY_ZQ0CR0 register uses a modified gray code to
select the different impedance setting.
But these gray code are incorrect, a workaournd from design team fixed the
bug in the calibration logic. The ZDATA contains four independent impedance
elements, but the algorithm combined the four elements into one. The elements
were fixed using properly shifted offsets.
Signed-off-by: Li Bin <bin.li@microchip.com>
[nicolas.ferre@microchip.com: fix indentation and combine 2 patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Ryan Wanner <Ryan.Wanner@microchip.com> Tested-by: Durai Manickam KR <durai.manickamkr@microchip.com> Tested-by: Andrei Simion <andrei.simion@microchip.com> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/28b33f9bcd0ca60ceba032969fe054d38f2b9577.1740671156.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Tested-by: Yunke Cao <yunkec@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-15-5900a9fed613@chromium.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the first ioctl() path, rtentry_to_fib_config() checks the prefix
length with bad_mask(). Also, fib_magic() always passes the correct
prefix: 32 or ifa->ifa_prefixlen, which is already validated.
Let's move fib_valid_key_len() to the rtnetlink path, rtm_to_fib_config().
While at it, 2 direct returns in rtm_to_fib_config() are changed to
goto to match other places in the same function
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-12-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Currently, __reserve_bp_slot() returns -ENOSPC for unsupported
breakpoint types on the architecture. For example, powerpc
does not support hardware instruction breakpoints. This causes
the perf_skip BPF selftest to fail, as neither ENOENT nor
EOPNOTSUPP is returned by perf_event_open for unsupported
breakpoint types. As a result, the test that should be skipped
for this arch is not correctly identified.
To resolve this, hw_breakpoint_event_init() should exit early by
checking for unsupported breakpoint types using
hw_breakpoint_slots_cached() and return the appropriate error
(-EOPNOTSUPP).
SRIOV VF does not have write access to AGP BAR regs.
Skip the writes to avoid a dmesg warning.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both MSM8974 and MSM8226 have only CX as power domain with MX & PX being
handled as regulators. Handle this case by reodering pd_names to have CX
first, and handling that the driver core will already attach a single
power domain internally.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
[luca: minor changes] Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250206-wcnss-singlepd-v2-2-9a53ee953dee@lucaweiss.eu
[bjorn: Added missing braces to else after multi-statement if] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
A cache device failing to resume due to mapping errors should not be
retried, as the failure leaves a partially initialized policy object.
Repeating the resume operation risks triggering BUG_ON when reloading
cache mappings into the incomplete policy object.
Reproduce steps:
1. create a cache metadata consisting of 512 or more cache blocks,
with some mappings stored in the first array block of the mapping
array. Here we use cache_restore v1.0 to build the metadata.
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
snd_seq_poll() calls snd_seq_write_pool_allocated() that reads out a
field in client->pool object, while it can be updated concurrently via
ioctls, as reported by syzbot. The data race itself is harmless, as
it's merely a poll() call, and the state is volatile. OTOH, the read
out of poll object info from the caller side is fragile, and we can
leave it better in snd_seq_pool_poll_wait() alone.
A similar pattern is seen in snd_seq_kernel_client_write_poll(), too,
which is called from the OSS sequencer.
This patch drops the pool checks from the caller side and add the
pool->lock in snd_seq_pool_poll_wait() for better data consistency.
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 2545c1c948a6 ("auxdisplay: Move hwidth and bwidth to struct
hd44780_common") makes charlcd_alloc() argument-less effectively dropping
the single allocation for the struct charlcd_priv object along with
the driver specific one. Restore that behaviour here.
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card.
Add support for Exynos7870 DW MMC controllers, for both SMU and non-SMU
variants. These controllers require a quirk to access 64-bit FIFO in 32-bit
accesses (DW_MMC_QUIRK_FIFO64_32).
pud_bad() is currently defined in terms of pud_table(). Although for some
configs, pud_table() is hard-coded to true i.e. when using 64K base pages
or when page table levels are less than 3.
pud_bad() is intended to check that the pud is configured correctly. Hence
let's open-code the same check that the full version of pud_table() uses
into pud_bad(). Then it always performs the check regardless of the config.
Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20250221044227.1145393-7-anshuman.khandual@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
nf_conntrack_max and nf_conntrack_expect_max sysctls were authorized to
be written any negative value, which would then be stored in the
unsigned int variables nf_conntrack_max and nf_ct_expect_max variables.
While the do_proc_dointvec_conv function is supposed to limit writing
handled by proc_dointvec proc_handler to INT_MAX. Such a negative value
being written in an unsigned int leads to a very high value, exceeding
this limit.
Moreover, the nf_conntrack_expect_max sysctl documentation specifies the
minimum value is 1.
The proc_handlers have thus been updated to proc_dointvec_minmax in
order to specify the following write bounds :
* Bound nf_conntrack_max sysctl writings between SYSCTL_ZERO
and SYSCTL_INT_MAX.
* Bound nf_conntrack_expect_max sysctl writings between SYSCTL_ONE
and SYSCTL_INT_MAX as defined in the sysctl documentation.
With this patch applied, sysctl writes outside the defined in the bound
will thus lead to a write error :
This reverts commit f590308536db ("timer debug: Hide kernel addresses via
%pK in /proc/timer_list")
The timer list helper SEQ_printf() uses either the real seq_printf() for
procfs output or vprintk() to print to the kernel log, when invoked from
SysRq-q. It uses %pK for printing pointers.
In the past %pK was prefered over %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d2469 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid this
issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer, easier to reason
about and sufficient here.
Currently, the IB uverbs API calls uobj_get_uobj_read(), which in turn
uses the rdma_lookup_get_uobject() helper to retrieve user objects.
In case of failure, uobj_get_uobj_read() returns NULL, overriding the
error code from rdma_lookup_get_uobject(). The IB uverbs API then
translates this NULL to -EINVAL, masking the actual error and
complicating debugging. For example, applications calling ibv_modify_qp
that fails with EBUSY when retrieving the QP uobject will see the
overridden error code EINVAL instead, masking the actual error.
Furthermore, based on rdma-core commit:
"2a22f1ced5f3 ("Merge pull request #1568 from jakemoroni/master")"
Kernel's IB uverbs return values are either ignored and passed on as is
to application or overridden with other errnos in a few cases.
Thus, to improve error reporting and debuggability, propagate the
original error from rdma_lookup_get_uobject() instead of replacing it
with EINVAL.
data_err=abort aborts the journal on I/O errors. However, this option is
meaningless if journal is disabled, so it is rejected in nojournal mode
to reduce unnecessary checks. Also, this option is ignored upon remount.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250122110533.4116662-4-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Each pin can be configured as a Special Function IO (SFIO) or GPIO,
where the SFIO enables the pin to operate in alternative modes such as
I2C, SPI, etc.
The current implementation sets all the pins back to SFIO mode
even if they were initially in GPIO mode. This can cause glitches
on the pins when pinctrl_gpio_free() is called.
Avoid these undesired glitches by storing the pin's SFIO/GPIO
state on GPIO request and restoring it on GPIO free.
On XenServer on Windows machine a platform device with ID 2 instead of
1 is used.
This device is mainly identical to device 1 but due to some Windows
update behaviour it was decided to use a device with a different ID.
This causes compatibility issues with Linux which expects, if Xen
is detected, to find a Xen platform device (5853:0001) otherwise code
will crash due to some missing initialization (specifically grant
tables). Specifically from dmesg
When using smc_pnet in SMC, it will only search the pnetid in the
base_ndev of the netdev hierarchy(both HW PNETID and User-defined
sw pnetid). This may not work for some scenarios when using SMC in
container on cloud environment.
In container, there have choices of different container network,
such as directly using host network, virtual network IPVLAN, veth,
etc. Different choices of container network have different netdev
hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1
in host below is the netdev directly related to the physical device).
_______________________________
| _________________ |
| |POD | |
| | | |
| | eth0_________ | |
| |____| |__| |
| | | |
| | | |
| eth1|base_ndev| eth0_______ |
| | | | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if directly using host network
________________________________
| _________________ |
| |POD __________ | |
| | |upper_ndev| | |
| |eth0|__________| | |
| |_______|_________| |
| |lower netdev |
| __|______ |
| eth1| | eth0_______ |
| |base_ndev| | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if using IPVLAN
_______________________________
| _____________________ |
| |POD _________ | |
| | |base_ndev|| |
| |eth0(veth)|_________|| |
| |____________|________| |
| |pairs |
| _______|_ |
| | | eth0_______ |
| veth|base_ndev| | RDMA ||
| |_________| |_______||
| _________ |
| eth1|base_ndev| |
| host |_________| |
---------------------------------
netdev hierarchy if using veth
Due to some reasons, the eth1 in host is not RDMA attached netdevice,
pnetid is needed to map the eth1(in host) with RDMA device so that POD
can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such
as Terway, network management plugin in container environment), and in
cloud environment the eth(in host) can dynamically be inserted by CNI
when POD create and dynamically be removed by CNI when POD destroy and
no POD related to the eth(in host) anymore. It is hard to config the
pnetid to the eth1(in host). But it is easy to config the pnetid to the
netdevice which can be seen in POD. When do SMC-R, both the container
directly using host network and the container using veth network can
successfully match the RDMA device, because the configured pnetid netdev
is a base_ndev. But the container using IPVLAN can not successfully
match the RDMA device and 0x03030000 fallback happens, because the
configured pnetid netdev is not a base_ndev. Additionally, if config
pnetid to the eth1(in host) also can not work for matching RDMA device
when using veth network and doing SMC-R in POD.
To resolve the problems list above, this patch extends to search user
-defined sw pnetid in the clc handshake ndev when no pnetid can be found
in the base_ndev, and the base_ndev take precedence over ndev for backward
compatibility. This patch also can unify the pnetid setup of different
network choices list above in container(Config user-defined sw pnetid in
the netdevice can be seen in POD).
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce()
out of it
- Move tcp_in_ack_event() later
- While at it, remove the inline from tcp_in_ack_event() and let
the compiler to decide
Accurate ECN's heuristics does not know if there is going
to be ACE field based CE counter increase or not until after
rtx queue has been processed. Only then the number of ACKed
bytes/pkts is available. As CE or not affects presence of
FLAG_ECE, that information for tcp_in_ack_event is not yet
available in the old location of the call to tcp_in_ack_event().
Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return prog's btf_id from bpf_prog_get_info_by_fd regardless of capable
check. This patch enables scenario, when freplace program, running
from user namespace, requires to query target prog's btf.
Some systems report INTx as not routed by setting pdev->irq to
IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to
setup eventfd signaling. Include this in the set of conditions
for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this
virtualized value in reporting INTx support via ioctl and sanity
checking ioctl paths since pdev->irq is re-used when the device
is in MSI mode.
The combination of these results in both the config space of the
device and the ioctl interface behaving as if the device does not
support INTx.
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
When uml_reserved is updated, min_low_pfn must also be updated
accordingly. Otherwise, min_low_pfn will not accurately reflect
the lowest available PFN.
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
The controller driver nacked the master request but didn't emit a
STOP to end the transaction. The driver shall refuse the unsupported
requests and return the controller state to IDLE by emitting a STOP.
Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
We should never apply a minimum dispclk value while in
prepare_bandwidth or while displays are active. This is
always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true
and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk
required) we also need adjust the logic that clamps it for
the actual request to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Eric Yang <eric.yang@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When attempting to build a too long path we are currently returning
-ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf()
to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON()
into the if statement's expression, as it makes it clear what is being
tested and also has the effect of adding 'unlikely' to the statement,
which allows the compiler to generate better code as this condition is
never expected to happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_reclaim_bgs_work(), we are grabbing a block group's zone unusable
bytes while not under the protection of the block group's spinlock, so
this can trigger race reports from KCSAN (or similar tools) since that
field is typically updated while holding the lock, such as at
__btrfs_add_free_space_zoned() for example.
Fix this by grabbing the zone unusable bytes while we are still in the
critical section holding the block group's spinlock, which is right above
where we are currently grabbing it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At close_ctree() after we have ran delayed iputs either explicitly through
calling btrfs_run_delayed_iputs() or later during the call to
btrfs_commit_super() or btrfs_error_commit_super(), we assert that the
delayed iputs list is empty.
We have (another) race where this assertion might fail because we have
queued an async write into the fs_info->workers workqueue. Here's how it
happens:
1) We are submitting a data bio for an inode that is not the data
relocation inode, so we call btrfs_wq_submit_bio();
2) btrfs_wq_submit_bio() submits a work for the fs_info->workers queue
that will run run_one_async_done();
3) We enter close_ctree(), flush several work queues except
fs_info->workers, explicitly run delayed iputs with a call to
btrfs_run_delayed_iputs() and then again shortly after by calling
btrfs_commit_super() or btrfs_error_commit_super(), which also run
delayed iputs;
4) run_one_async_done() is executed in the work queue, and because there
was an IO error (bio->bi_status is not 0) it calls btrfs_bio_end_io(),
which drops the final reference on the associated ordered extent by
calling btrfs_put_ordered_extent() - and that adds a delayed iput for
the inode;
5) At close_ctree() we find that after stopping the cleaner and
transaction kthreads the delayed iputs list is not empty, failing the
following assertion:
ASSERT(list_empty(&fs_info->delayed_iputs));
Fix this by flushing the fs_info->workers workqueue before running delayed
iputs at close_ctree().
David reported this when running generic/648, which exercises IO error
paths by using the DM error table.
Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[BUG]
Even after all the error fixes related the
"ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can
still hit it reliably with my experimental 2K block size.
[CAUSE]
In my case, all the error is triggered after the fs is already in error
status.
I find the following call trace to be the cause of race:
The root cause is that, btrfs_wait_ordered_roots() only wait for
ordered extents to finish their IOs, not to wait for them to finish and
removed.
[FIX]
Since btrfs_error_commit_super() will flush and wait for all ordered
extents, it should be executed early, before we start flushing the
workqueues.
And since btrfs_error_commit_super() now runs early, there is no need to
run btrfs_run_delayed_iputs() inside it, so just remove the
btrfs_run_delayed_iputs() call from btrfs_error_commit_super().
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The inline function btrfs_is_testing() is hardcoded to return 0 if
CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on
the compiler optimizing out the call to alloc_test_extent_buffer() in
btrfs_find_create_tree_block(), as it's not been defined (it's behind an
#ifdef).
Add a stub version of alloc_test_extent_buffer() to avoid linker errors
on non-standard optimization levels. This problem was seen on GCC 14
with -O0 and is helps to see symbols that would be otherwise optimized
out.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the async discard machinery owns a ref to the block_group
when the block_group is queued on a discard list. However, to handle
races with discard cancellation and the discard workfn, we have a
specific logic to detect that the block_group is *currently* running in
the workfn, to protect the workfn's usage amidst cancellation.
As far as I can tell, this doesn't have any overt bugs (though
finish_discard_pass() and remove_from_discard_list() racing can have a
surprising outcome for the caller of remove_from_discard_list() in that
it is again added at the end).
But it is needlessly complicated to rely on locking and the nullity of
discard_ctl->block_group. Simplify this significantly by just taking a
refcount while we are in the workfn and unconditionally drop it in both
the remove and workfn paths, regardless of if they race.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the I2C QUP controller is used together with a DMA engine it needs
to vote for the interconnect path to the DRAM. Otherwise it may be
unable to access the memory quickly enough.
The requested peak bandwidth is dependent on the I2C core clock.
To avoid sending votes too often the bandwidth is always requested when
a DMA transfer starts, but dropped only on runtime suspend. Runtime
suspend should only happen if no transfer is active. After resumption we
can defer the next vote until the first DMA transfer actually happens.
The implementation is largely identical to the one introduced for
spi-qup in commit ecdaa9473019 ("spi: qup: Vote for interconnect
bandwidth to DRAM") since both drivers represent the same hardware
block.
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation.
Signed-off-by: Philip Redkin <me@rarity.fan> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan Signed-off-by: Sasha Levin <sashal@kernel.org>
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase wait to 15 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly. Issues with voltage drain
time were only observed on Apollo Lake and Bay Trail host controllers
so this fix is limited to those devices.
If a faulty CXL memory device returns a broken zero LSA size in its
memory device information (Identify Memory Device (Opcode 4000h), CXL
spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm
driver:
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
If the client should see an ENETDOWN when trying to connect to the data
server, it might still be able to talk to the metadata server through
another NIC. If so, report the error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased after following commit
("PCI: dwc: Use parent_bus_offset").
'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.
Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.
If opts.uaccess isn't set, the uaccess validation is disabled, but only
partially: it doesn't read the uaccess_safe_builtin list but still tries
to do the validation. Disable it completely to prevent false warnings.
0c1d7a2c2d32 ("lockdep: Remove softirq accounting on PREEMPT_RT.")
the wait context test for mutex usage within "in softirq context" fails
as it references @softirq_context:
| wait context tests |
--------------------------------------------------------------------------
| rcu | raw | spin |mutex |
--------------------------------------------------------------------------
in hardirq context: ok | ok | ok | ok |
in hardirq context (not threaded): ok | ok | ok | ok |
in softirq context: ok | ok | ok |FAILED|
As a fix, add lockdep map for BH disabled section. This fixes the
issue by letting us catch cases when local_bh_disable() gets called
with preemption disabled where local_lock doesn't get acquired.
In the case of "in softirq context" selftest, local_bh_disable() was
being called with preemption disable as it's early in the boot.
[ boqun: Move the lockdep annotations into __local_bh_*() to avoid false
positives because of unpaired local_bh_disable() reported by
Borislav Petkov and Peter Zijlstra, and make bh_lock_map
only exist for PREEMPT_RT. ]
[ mingo: Restored authorship and improved the bh_lock_map definition. ]
Executing dql_reset after setting a non-zero value for limit_min can
lead to an unreasonable situation where dql->limit is less than
dql->limit_min.
For instance, after setting
/sys/class/net/eth*/queues/tx-0/byte_queue_limits/limit_min,
an ifconfig down/up operation might cause the ethernet driver to call
netdev_tx_reset_queue, which in turn invokes dql_reset.
In this case, dql->limit is reset to 0 while dql->limit_min remains
non-zero value, which is unexpected. The limit should always be
greater than or equal to limit_min.
Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.
projects / thirdparty / kernel / stable.git / log
