Uwe Kleine-König [Mon, 30 Jun 2025 16:27:26 +0000 (09:27 -0700)]
Input: max77693 - convert to atomic pwm operation
The driver called pwm_config() and pwm_enable() separately. Today both
are wrappers for pwm_apply_might_sleep() and it's more effective to call
this function directly and only once. Also don't configure the
duty_cycle and period if the next operation is to disable the PWM so
configure the PWM in max77693_haptic_enable().
With the direct use of pwm_apply_might_sleep() the need to call
pwm_apply_args() in .probe() is now gone, too, so drop this one.
Javier Carrasco [Wed, 16 Oct 2024 04:02:42 +0000 (06:02 +0200)]
dt-bindings: input: touchscreen: st1232: add touch-overlay example
The touch-overlay feature adds support for segments (touch areas) on the
touchscreen surface that represent overlays with clipped touchscreen
areas and printed buttons.
Add nodes for a clipped touchscreen and overlay buttons to the existing
example.
Some touch devices provide mechanical overlays with different objects
like buttons or clipped touchscreen surfaces.
In order to support these objects, add a series of helper functions
to the input subsystem to transform them into overlay objects via
device tree nodes.
These overlay objects consume the raw touch events and report the
expected input events depending on the object properties.
Note that the current implementation allows for multiple definitions
of touchscreen areas (regions that report touch events), but only the
first one will be used for the touchscreen device that the consumers
typically provide.
Should the need for multiple touchscreen areas arise, additional
touchscreen devices would be required at the consumer side.
There is no limitation in the number of touch areas defined as buttons.
The touch-overlay encompasses a number of touch areas that define a
clipped touchscreen area and/or buttons with a specific functionality.
A clipped touchscreen area avoids getting events from regions that are
physically hidden by overlay frames.
For touchscreens with printed overlay buttons, sub-nodes with a suitable
key code can be defined to report key events instead of the original
touch events.
Werner Sembach [Tue, 22 Jul 2025 12:04:35 +0000 (14:04 +0200)]
Input: atkbd - correctly map F13 - F24
Currently only F23 is correctly mapped for PS/2 keyboards.
According to this table:
https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
- F24 and Zenkaku/Hankaku share the same scancode, but since in real world
Zenkaku/Hankaku keys seem to just use the tilde scancode, this patch binds the
scancode to F24. Note that on userspace side the KEY_ZENKAKUHANKAKU keycode is
currently not bound in xkeyboard-config, so it is (mostly*) unused anyway.
* Qt on Wayland and therefore KDE on Wayland can see the keypress anyway for
some reason and it is actually used in a touchpad toggle shortcut, but this is
currently being fixed in both KDE and xkeyboard-config to make this less weird,
so it could directly be fixed to correctly handle the F24 keypress instead.
- The scancodes for F13-F22 are currently unmapped so there will probably be no
harm in mapping them. This would also fix the issue that some of these keys
can't be mapped as the target from userspace using the `setkeycodes` command.
Many controllers these days have started including grip buttons. As
there has been no particular assigned BTN_* constants for these, they've
been haphazardly assigned to BTN_TRIGGER_HAPPY*. Unfortunately, the
assignment of these has varied significantly between drivers.
Add and document new constants for these grip buttons.
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Since dance pads can have both up/down or left/right pressed at the same time,
by design, they are not suitable for mapping the buttons to axes. Historically,
this driver mapped the D-pad to BTN_TRIGGER_HAPPY1-4 in these cases, and before
that as mouse buttons. However, BTN_DPAD_* exists for this and makes far more
sense than the arbitrary mapping it was before.
André Apitzsch [Sun, 27 Jul 2025 07:31:32 +0000 (00:31 -0700)]
dt-bindings: input: syna,rmi4: Document F1A function
In some configurations the touch controller can support touch keys.
Document the linux,keycodes property that enables those keys and
specifies the keycodes that should be used to report the key events.
Dmitry Torokhov [Wed, 19 Feb 2025 17:14:23 +0000 (09:14 -0800)]
Input: remove special handling of id->driver_info when matching
evdev has switched to match on EV_SYN instead of relying on non-zero
driver_info field to allow matching to all devices. Remove special
handling from input core.
Dmitry Torokhov [Tue, 18 Feb 2025 23:09:21 +0000 (15:09 -0800)]
Input: evdev - switch matching to EV_SYN
Each input device has EV_SYN capability. This is enforced by the input
core which sets this capability bit unconditionally in
input_register_device().
Switch evdev matching from declaring non-zero id->driver_info to match
on EV_SYN so that special handling can be removed from
input_match_device() and "driver_info" field can be removed from
input_device_id structure.
Dmitry Torokhov [Mon, 19 Aug 2024 04:58:04 +0000 (21:58 -0700)]
Input: samsung-keypad - use per-chip parameters
Instead of doing conditional logic based on the chip type, define
per-chip parameter structure, and reference it in the match data
(either of_device_id or platform_device_id).
Dmitry Torokhov [Mon, 19 Aug 2024 04:57:58 +0000 (21:57 -0700)]
Input: samsung-keypad - switch to using devm_clk_get_prepared()
Switch to using devm_clk_get_prepared() instead of combining
devm_clk_get() with clk_prepare(), which simplifies the code and
ensures that the clock is unprepared at the right time relative to
releasing other managed resources.
Nuno Sá [Tue, 1 Jul 2025 14:32:12 +0000 (15:32 +0100)]
Input: adp5589: remove the driver
The adp5589 support is based on legacy platform data and there's no
upstream platform using this device.
Moreover, recently, with
commit 480a8ad683d7 ("mfd: adp5585: Add Analog Devices ADP5585 core support")
we overlapped support for the adp5585 device (gpiochip part of it) but
since it actually makes sense for the device to be supported under MFD, we
can complement it and add the keymap support for it (properly based on FW
properties). And that is what
commit 04840c5363a6 ("Input: adp5585: Add Analog Devices ADP5585/89 support")
Nuno Sá [Tue, 1 Jul 2025 14:32:11 +0000 (15:32 +0100)]
Input: adp5585: Add Analog Devices ADP5585/89 support
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the keyboard function using the platform device
registered by the core MFD driver.
The ADP5589 has 19 pins and also features an unlock function.
Nuno Sá [Tue, 1 Jul 2025 14:32:10 +0000 (15:32 +0100)]
gpio: adp5585: support gpi events
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Nuno Sá [Tue, 1 Jul 2025 14:32:09 +0000 (15:32 +0100)]
mfd: adp5585: Add support for input devices
The ADP558x family supports a built in keypad matrix decoder which can
be added as an Input device. In order to both support the Input and the
GPIO device, we need to create a bitmap of the supported pins and track
their usage since they can either be used as GPIOs (GPIs) or as part of
the keymap.
We also need to mark special pins busy in case some features are being
used (ex: pwm or reset events).
Nuno Sá [Tue, 1 Jul 2025 14:32:08 +0000 (15:32 +0100)]
mfd: adp5585: Support reset and unlock events
The ADP558x family of devices can be programmed to respond to some
especial events, In case of the unlock events, one can lock the keypad
and use KEYS or GPIs events to unlock it. For the reset events, one can
again use a combinations of GPIs/KEYs in order to generate an event that
will trigger the device to generate an output reset pulse.
Nuno Sá [Tue, 1 Jul 2025 14:32:07 +0000 (15:32 +0100)]
mfd: adp5585: Add support for event handling
These devices are capable of generate FIFO based events based on KEY or
GPI presses. Add support for handling these events. This is in
preparation of adding full support for keymap and gpis based events.
Nuno Sá [Tue, 1 Jul 2025 14:32:06 +0000 (15:32 +0100)]
dt-bindings: mfd: adp5585: add properties for input events
Add properties related to input events. These devices can act as
keyboards and can support events either via a keymap Matrix or through
GPIs. Note that the device needs to be an interrupt controller for GPIs
based events.
We specifically need a property specifying the pins used by the keymap
matrix since these devices have no requirement for rows and columns to be
contiguous without holes which is enforced by the standard input
properties.
Nuno Sá [Tue, 1 Jul 2025 14:32:05 +0000 (15:32 +0100)]
pwm: adp5585: add support for adp5589
Add support for the adp5589 I/O expander. From a PWM point of view it is
pretty similar to adp5585. Main difference is the address
of registers meaningful for configuring the PWM.
Nuno Sá [Tue, 1 Jul 2025 14:32:04 +0000 (15:32 +0100)]
gpio: adp5585: add support for the adp5589 expander
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.
Also some register addresses are different.
While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.
Nuno Sá [Tue, 1 Jul 2025 14:32:03 +0000 (15:32 +0100)]
mfd: adp5585: Add a per chip reg struture
There are some differences in the register map between the devices.
Hence, add a register structure per device. This will be needed in
following patches.
On top of that adp5585_fill_regmap_config() is renamed and reworked so
that the current struct adp5585_info act as template (they indeed
contain all the different data between variants) which can then be
complemented depending on the device (as identified by the id register).
This is done like this since a lot of the data is pretty much the same
between variants of the same device.
Nuno Sá [Tue, 1 Jul 2025 14:32:01 +0000 (15:32 +0100)]
mfd: adp5585: Refactor how regmap defaults are handled
The only thing changing between variants is the regmap default
registers. Hence, instead of having a regmap configuration for every
variant (duplicating lots of fields), add a chip info type of structure
with a regmap ID to identify which defaults to use and populate
regmap_config at runtime given a template plus the id. Also note that
between variants, the defaults can be the same which means the chip info
structure can be used in more than one compatible.
This will also make it simpler adding new chips with more variants.
Also note that the chip info structures are deliberately not const as
they will also contain lots of members that are the same between the
different devices variants and so we will fill those at runtime.
Nuno Sá [Tue, 1 Jul 2025 14:31:58 +0000 (15:31 +0100)]
mfd: adp5585: Enable oscillator during probe
Make sure to enable the oscillator in the top device. This will allow to
not control this in the child PWM device as that would not work with
future support for keyboard matrix where the oscillator needs to be
always enabled (and so cannot be disabled by disabling PWM).
Nuno Sá [Tue, 1 Jul 2025 14:31:57 +0000 (15:31 +0100)]
mfd: adp5585: Only add devices given in FW
Not all devices (features) of the adp5585 device are mandatory to be
used in all platforms. Hence, check what's given in FW and dynamically
create the mfd_cell array to be given to devm_mfd_add_devices().
Nuno Sá [Tue, 1 Jul 2025 14:31:56 +0000 (15:31 +0100)]
dt-bindings: mfd: adp5585: ease on the required properties
It is not mandatory to use all the capabilities of the device. One can
very well only use it as a gpio controller without the PWM support. This
will be even more evident when support for the matrix keymap is added.
Hence drop the requirements for PWM and GPIO.
Wolfram Sang [Tue, 1 Jul 2025 18:40:06 +0000 (11:40 -0700)]
Input: edt-ft5x06 - use per-client debugfs directory
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Both pwm_config() and pwm_enable() are wrappers around
pwm_apply_might_sleep(). Instead of calling this function twice only
call it once without an intermediate step.
Setup the PWM in max8997_haptic_enable() only where it was enabled
historically. max8997_haptic_set_duty_cycle() is renamed accordingly to
make it clear this function is only about the internal setup now.
pwm_config() was called earlier back then, but that call has no effect
on the hardware when the PWM is disabled, so delaying this configuration
doesn't make a difference.
As pwm_apply_might_sleep() is used now defining the whole state of the
PWM, the call to pwm_apply_args() in .probe() can be dropped now, too.
The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all s3c24xx support")
Remove the input driver.
This was originally posted as a set of pcf50633 removals in March,
and is the only major component that hasn't been picked up.
https://lore.kernel.org/all/20250311014959.743322-1-linux@treblig.org/
Joseph Guo [Mon, 30 Jun 2025 00:35:39 +0000 (17:35 -0700)]
Input: goodix - add support for polling mode
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Linus Torvalds [Sun, 8 Jun 2025 18:33:00 +0000 (11:33 -0700)]
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Linus Torvalds [Sun, 8 Jun 2025 18:27:20 +0000 (11:27 -0700)]
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Zhang Rui [Fri, 30 May 2025 00:09:28 +0000 (08:09 +0800)]
tools/power turbostat: Avoid probing the same perf counters
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Sat, 17 May 2025 09:44:50 +0000 (17:44 +0800)]
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: Add Android support for MSR device handling
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sun, 8 Jun 2025 18:07:33 +0000 (11:07 -0700)]
Merge tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Linus Torvalds [Sun, 8 Jun 2025 18:02:53 +0000 (11:02 -0700)]
Merge tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Linus Torvalds [Sun, 8 Jun 2025 17:35:12 +0000 (10:35 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Linus Torvalds [Sun, 8 Jun 2025 17:20:21 +0000 (10:20 -0700)]
Merge tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Linus Torvalds [Sun, 8 Jun 2025 15:19:01 +0000 (08:19 -0700)]
Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Linus Torvalds [Sat, 7 Jun 2025 17:05:35 +0000 (10:05 -0700)]
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Linus Torvalds [Sat, 7 Jun 2025 17:00:03 +0000 (10:00 -0700)]
Merge tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Linus Torvalds [Sat, 7 Jun 2025 16:56:18 +0000 (09:56 -0700)]
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
Linus Torvalds [Sat, 7 Jun 2025 16:40:08 +0000 (09:40 -0700)]
Merge tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Linus Torvalds [Sat, 7 Jun 2025 14:24:07 +0000 (07:24 -0700)]
Merge tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
Mike Rapoport [Sat, 17 May 2025 09:30:48 +0000 (12:30 +0300)]
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/ Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Thomas Huth [Fri, 14 Mar 2025 07:10:03 +0000 (08:10 +0100)]
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Al Viro [Wed, 4 Jun 2025 16:27:08 +0000 (12:27 -0400)]
do_change_type(): refuse to operate on unmounted/not ours mounts
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 2 Jun 2025 00:11:06 +0000 (20:11 -0400)]
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org> Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
projects / thirdparty / linux.git / log
