If the netdevice is within a container and communicates externally
through network technologies such as VxLAN, we won't be able to find
routing information in the init_net namespace. To address this issue,
we need to add a struct net parameter to the smc_ib_find_route function.
This allow us to locate the routing information within the corresponding
net namespace, ensuring the correct completion of the SMC CLC interaction.
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment") Signed-off-by: Albert Huang <huangjie.albert@bytedance.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20231011074851.95280-1-huangjie.albert@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.
Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.
Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite. Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.
The alternative that Paolo proposed was to only skip when the
add-flow is being run. This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing). In that case, it could also be
broken and we would need additional skip logic anyway. Just draw
a line in the sand now.
Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/ Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
memcmp is not consider safe to use with cryptographic secrets:
'Do not use memcmp() to compare security critical data, such as
cryptographic secrets, because the required CPU time depends on the
number of equal bytes.'
While usage of memcmp for ZERO_KEY may not be considered a security
critical data, it can lead to more usage of memcmp with pairing keys
which could introduce more security problems.
Fixes: 455c2ff0a558 ("Bluetooth: Fix BR/EDR out-of-band pairing with only initiator data") Fixes: 33155c4aae52 ("Bluetooth: hci_event: Ignore NULL link key") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 0288c3e709e5 ("ice: reset first in crash dump kernels") Signed-off-by: Sasha Levin <sashal@kernel.org>
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Split tls_rx_reader_{lock,unlock} into an 'acquire/release' and
the actual locking part.
With that we can use the tls_rx_reader_lock in situations where
the socket is already locked.
Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230726191556.41714-6-hare@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Sasha Levin <sashal@kernel.org>
In the cited commit, if the routing device is ovs internal port, the
out device is set to uplink, and packets go out after encapsulation.
If filter device is uplink, it can trigger the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 3966): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xcdb051), err(-22)
Fix this issue by not offloading internal port if filter device is out
device. In this case, packets are not forwarded to the root table to
be processed, the termination table is used instead to forward them
from uplink to uplink.
Fixes: 100ad4e2d758 ("net/mlx5e: Offload internal port as encap route device") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, whenever fw issues a change ownership event, the PF that owns
the fw tracer drops its ownership directly and the other PFs try to pick
up the ownership via what MTRC register suggests.
In some cases, driver releases the ownership of the tracer and reacquires
it later on. Whenever the driver releases ownership of the tracer, fw
issues a change ownership event. This event can be delayed and come after
driver has reacquired ownership of the tracer. Thus the late event will
trigger the tracer owner PF to release the ownership again and lead to a
scenario where no PF is owning the tracer.
To prevent the scenario described above, when handling a change
ownership event, do not drop ownership of the tracer directly, instead
read the fw MTRC register to retrieve the up-to-date owner of the tracer
and set it accordingly in driver level.
Currently, mlx5 is registering event handler for vport context change
event some time after arming the event. this can lead to missing an
event, which will result in wrong rules in the FDB.
Hence, register the event handler before arming the event.
This solution is valid since FW is sending vport context change event
only on vports which SW armed, and SW arming the vport when enabling
it, which is done after the FDB has been created.
There are race conditions that may lead to inet6_dev refcount underflow
in xfrm6_dst_destroy() and rt6_uncached_list_flush_dev().
One of the refcount underflow bugs is shown below:
(cpu 1) | (cpu 2)
xfrm6_dst_destroy() |
... |
in6_dev_put() |
| rt6_uncached_list_flush_dev()
... | ...
| in6_dev_put()
rt6_uncached_list_del() | ...
... |
xfrm6_dst_destroy() calls rt6_uncached_list_del() after in6_dev_put(),
so rt6_uncached_list_flush_dev() has a chance to call in6_dev_put()
again for the same inet6_dev.
Fix it by moving in6_dev_put() after rt6_uncached_list_del() in
xfrm6_dst_destroy().
cpu 0 cpu1
xfrm_dump_policy
xfrm_policy_walk
list_move_tail
xfrm_add_policy
... ...
xfrm_policy_inexact_list_reinsert
list_for_each_entry_reverse
if (!policy->bydst_reinsert)
//read non-existent policy
xfrm_dump_policy_done
xfrm_policy_walk_done
list_del(&walk->walk.all);
If dump_one_policy() returns err (triggered by netlink socket),
xfrm_policy_walk() will move walk initialized by socket to list
net->xfrm.policy_all. so this socket becomes visible in the global
policy list. The head *walk can be traversed when users add policies
with different prefixlen and trigger xfrm_policy node merge.
The issue can also be triggered by policy list traversal while rehashing
and flushing policies.
It can be fixed by skip such "policies" with walk.dead set to 1.
Fixes: 9cf545ebd591 ("xfrm: policy: store inexact policies in a tree ordered by destination address") Fixes: 12a169e7d8f4 ("ipsec: Put dumpers on the dump list") Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add nr_maxactive to specify rethook_node pool size. This means
the maximum number of actively running target functions concurrently
for probing by exit_handler. Note that if the running function is
preempted or sleep, it is still counted as 'active'.
Link: https://lkml.kernel.org/r/167526697917.433354.17779774988245113106.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 700b2b439766 ("fprobe: Fix to ensure the number of active retprobes is not zero") Signed-off-by: Sasha Levin <sashal@kernel.org>
Pass the private entry_data to the entry and exit handlers so that
they can share the context data, something like saved function
arguments etc.
User must specify the private entry_data size by @entry_data_size
field before registering the fprobe.
Link: https://lkml.kernel.org/r/167526696173.433354.17408372048319432574.stgit@mhiramat.roam.corp.google.com Cc: Florent Revest <revest@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 700b2b439766 ("fprobe: Fix to ensure the number of active retprobes is not zero") Signed-off-by: Sasha Levin <sashal@kernel.org>
When cpufreq's policy is 'single', there is a scenario that will
cause sg_policy's next_freq to be unable to update.
When the CPU's util is always max, the cpufreq will be max,
and then if we change the policy's scaling_max_freq to be a
lower freq, indeed, the sg_policy's next_freq need change to
be the lower freq, however, because the cpu_is_busy, the next_freq
would keep the max_freq.
When suspending the computer, a Switch Pro Controller connected via USB will
lose its internal status. However, because the USB connection was technically
never lost, when resuming the computer, the driver will attempt to communicate
with the controller as if nothing happened (and fail).
Because of this, the user was forced to manually disconnect the controller
(or to press the sync button on the controller to power it off), so that it
can be re-initialized.
With this patch, the controller will be automatically re-initialized after
resuming from suspend.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <tinozzo123@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_realloc_node() we have these checks to verify we are not using a
stale transaction (a past transaction with an unblocked state or higher),
and the only thing we do is to trigger two WARN_ON(). This however is a
critical problem, highly unexpected and if it happens it's most likely due
to a bug, so we should error out and turn the fs into error state so that
such issue is much more easily noticed if it's triggered.
The problem is critical because in btrfs_realloc_node() we COW tree blocks,
and using such stale transaction will lead to not persisting the extent
buffers used for the COW operations, as allocating tree block adds the
range of the respective extent buffers to the ->dirty_pages iotree of the
transaction, and a stale transaction, in the unlocked state or higher,
will not flush dirty extent buffers anymore, therefore resulting in not
persisting the tree block and resource leaks (not cleaning the dirty_pages
iotree for example).
So do the following changes:
1) Return -EUCLEAN if we find a stale transaction;
2) Turn the fs into error state, with error -EUCLEAN, so that no
transaction can be committed, and generate a stack trace;
3) Combine both conditions into a single if statement, as both are related
and have the same error message;
4) Mark the check as unlikely, since this is not expected to ever happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_cow_block() we check if the block being COWed belongs to a root
that is being deleted and if so we log an error message. However this is
an unexpected case and it indicates a bug somewhere, so we should return
an error and abort the transaction. So change this in the following ways:
1) Abort the transaction with -EUCLEAN, so that if the issue ever happens
it can easily be noticed;
2) Change the logged message level from error to critical, and change the
message itself to print the block's logical address and the ID of the
root;
3) Return -EUCLEAN to the caller;
4) As this is an unexpected scenario, that should never happen, mark the
check as unlikely, allowing the compiler to potentially generate better
code.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_cow_block() we have these checks to verify we are not using a
stale transaction (a past transaction with an unblocked state or higher),
and the only thing we do is to trigger a WARN with a message and a stack
trace. This however is a critical problem, highly unexpected and if it
happens it's most likely due to a bug, so we should error out and turn the
fs into error state so that such issue is much more easily noticed if it's
triggered.
The problem is critical because using such stale transaction will lead to
not persisting the extent buffer used for the COW operation, as allocating
a tree block adds the range of the respective extent buffer to the
->dirty_pages iotree of the transaction, and a stale transaction, in the
unlocked state or higher, will not flush dirty extent buffers anymore,
therefore resulting in not persisting the tree block and resource leaks
(not cleaning the dirty_pages iotree for example).
So do the following changes:
1) Return -EUCLEAN if we find a stale transaction;
2) Turn the fs into error state, with error -EUCLEAN, so that no
transaction can be committed, and generate a stack trace;
3) Combine both conditions into a single if statement, as both are related
and have the same error message;
4) Mark the check as unlikely, since this is not expected to ever happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens reported the following warnings from -Wmaybe-uninitialized recent
Linus' branch.
In file included from ./include/asm-generic/rwonce.h:26,
from ./arch/arm64/include/asm/rwonce.h:71,
from ./include/linux/compiler.h:246,
from ./include/linux/export.h:5,
from ./include/linux/linkage.h:7,
from ./include/linux/kernel.h:17,
from fs/btrfs/ioctl.c:6:
In function ‘instrument_copy_from_user_before’,
inlined from ‘_copy_from_user’ at ./include/linux/uaccess.h:148:3,
inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:183:7,
inlined from ‘btrfs_ioctl_space_info’ at fs/btrfs/ioctl.c:2999:6,
inlined from ‘btrfs_ioctl’ at fs/btrfs/ioctl.c:4616:10:
./include/linux/kasan-checks.h:38:27: warning: ‘space_args’ may be used
uninitialized [-Wmaybe-uninitialized]
38 | #define kasan_check_write __kasan_check_write
./include/linux/instrumented.h:129:9: note: in expansion of macro
‘kasan_check_write’
129 | kasan_check_write(to, n);
| ^~~~~~~~~~~~~~~~~
./include/linux/kasan-checks.h: In function ‘btrfs_ioctl’:
./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const
volatile void *’ to ‘__kasan_check_write’ declared here
20 | bool __kasan_check_write(const volatile void *p, unsigned int
size);
| ^~~~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c:2981:39: note: ‘space_args’ declared here
2981 | struct btrfs_ioctl_space_args space_args;
| ^~~~~~~~~~
In function ‘instrument_copy_from_user_before’,
inlined from ‘_copy_from_user’ at ./include/linux/uaccess.h:148:3,
inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:183:7,
inlined from ‘_btrfs_ioctl_send’ at fs/btrfs/ioctl.c:4343:9,
inlined from ‘btrfs_ioctl’ at fs/btrfs/ioctl.c:4658:10:
./include/linux/kasan-checks.h:38:27: warning: ‘args32’ may be used
uninitialized [-Wmaybe-uninitialized]
38 | #define kasan_check_write __kasan_check_write
./include/linux/instrumented.h:129:9: note: in expansion of macro
‘kasan_check_write’
129 | kasan_check_write(to, n);
| ^~~~~~~~~~~~~~~~~
./include/linux/kasan-checks.h: In function ‘btrfs_ioctl’:
./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const
volatile void *’ to ‘__kasan_check_write’ declared here
20 | bool __kasan_check_write(const volatile void *p, unsigned int
size);
| ^~~~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c:4341:49: note: ‘args32’ declared here
4341 | struct btrfs_ioctl_send_args_32 args32;
| ^~~~~~
This was due to his config options and having KASAN turned on,
which adds some extra checks around copy_from_user(), which then
triggered the -Wmaybe-uninitialized checker for these cases.
Fix the warnings by initializing the different structs we're copying
into.
Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The One Mix 2S is a mini laptop with a 1200x1920 portrait screen
mounted in a landscape oriented clamshell case. Because of the too
generic DMI strings this entry is also doing bios-date matching.
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit 7c6bb7d2faaf
("net/ipv6: Add knob to skip DELROUTE message on device down") introduced
a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send
the route delete notify blindly in fib_table_flush().
To fix this issue, let's add a new flag in "struct fib_info" to track the
deleted prefer source address routes, and only send notify for them.
After update:
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the pathological case of building sky2 with 16k PAGE_SIZE, the
frag_addr[] array would never be used, so the original code was correct
that size should be 0. But the compiler now gets upset with 0 size arrays
in places where it hasn't eliminated the code that might access such an
array (it can't figure out that in this case an rx skb with fragments
would never be created). To keep the compiler happy, make sure there is
at least 1 frag_addr in struct rx_ring_info:
In file included from include/linux/skbuff.h:28,
from include/net/net_namespace.h:43,
from include/linux/netdevice.h:38,
from drivers/net/ethernet/marvell/sky2.c:18:
drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb':
include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=]
416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page'
1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i],
| ^~~~~~~~~~~~~~
In file included from drivers/net/ethernet/marvell/sky2.c:41:
drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr'
2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
| ^~~~~~~~~
With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so:
#define ETH_JUMBO_MTU 9000
causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning.
Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/ Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the structure is not initialized then boolean types might be copied
into the tracing data without being initialised. This causes data from
the stack to leak into the trace and also triggers a UBSAN failure which
can easily be avoided here.
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
Cisco AP module 9115 with FW 17.3 has a bug and sends a too
large maximum MPDU length in the association response
(indicating 12k) that it cannot actually process.
Work around that by taking the minimum between what's in the
association response and the BSS elements (from beacon or
probe response).
When the scan request includes a non broadcast BSSID, when adding the
scan parameters for 6GHz collocated scanning, do not include entries
that do not match the given BSSID.
net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While executing the Android 13 CTS Verifier Secure Server test on a
ChromeOS device, it was observed that the Bluetooth host initiates
authentication for an RFCOMM connection after SSP completes.
When this happens, some Intel Bluetooth controllers, like AC9560, would
disconnect with "Connection Rejected due to Security Reasons (0x0e)".
Historically, BlueZ did not mandate this authentication while an
authenticated combination key was already in use for the connection.
This behavior was changed since commit 7b5a9241b780
("Bluetooth: Introduce requirements for security level 4").
So, this patch addresses the aforementioned disconnection issue by
restoring the previous behavior.
Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a slab-out-of-bounds Write bug in hid-holtek-kbd driver.
The problem is the driver assumes the device must have an input
but some malicious devices violate this assumption.
Fix this by checking hid_device's input is non-empty before its usage.
Signed-off-by: Ma Ke <make_ruc2021@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Debugging indicates that nothing else is clearing the info->flags,
so some frames were flagged as ACKed when they should not be.
Explicitly clear the ack flag to ensure this does not happen.
When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.
Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan reported that he was seeing the new warning in
setattr_copy_mgtime pop when starting podman containers. Overlayfs is
trying to set the atime and mtime via notify_change without also
setting the ctime.
POSIX states that when the atime and mtime are updated via utimes() that
we must also update the ctime to the current time. The situation with
overlayfs copy-up is analogies, so add ATTR_CTIME to the bitmask.
notify_change will fill in the value.
Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jeff Layton <jlayton@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230913-ctime-v1-1-c6bc509cbc27@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I2C_CLASS_DEPRECATED is a flag and not an actual class.
There's nothing speaking against both, parent and child, having
I2C_CLASS_DEPRECATED set. Therefore exclude it from the check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens reported a compiler warning when using
CONFIG_CC_OPTIMIZE_FOR_SIZE=y that looks like this
fs/btrfs/tree-log.c: In function ‘btrfs_log_prealloc_extents’:
fs/btrfs/tree-log.c:4828:23: warning: ‘start_slot’ may be used
uninitialized [-Wmaybe-uninitialized]
4828 | ret = copy_items(trans, inode, dst_path, path,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4829 | start_slot, ins_nr, 1, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/tree-log.c:4725:13: note: ‘start_slot’ was declared here
4725 | int start_slot;
| ^~~~~~~~~~
The compiler is incorrect, as we only use this code when ins_len > 0,
and when ins_len > 0 we have start_slot properly initialized. However
we generally find the -Wmaybe-uninitialized warnings valuable, so
initialize start_slot to get rid of the warning.
Reported-by: Jens Axboe <axboe@kernel.dk> Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running a delayed tree reference, if we find a ref count different
from 1, we return -EIO. This isn't an IO error, as it indicates either a
bug in the delayed refs code or a memory corruption, so change the error
code from -EIO to -EUCLEAN. Also tag the branch as 'unlikely' as this is
not expected to ever happen, and change the error message to print the
tree block's bytenr without the parenthesis (and there was a missing space
between the 'block' word and the opening parenthesis), for consistency as
that's the style we used everywhere else.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When starting a transaction, with a non-zero number of items, we reserve
metadata space for that number of items and for delayed refs by doing a
call to btrfs_block_rsv_add(), with the transaction block reserve passed
as the block reserve argument. This reserves metadata space and adds it
to the transaction block reserve. Later we migrate the space we reserved
for delayed references from the transaction block reserve into the delayed
refs block reserve, by calling btrfs_migrate_to_delayed_refs_rsv().
btrfs_migrate_to_delayed_refs_rsv() decrements the number of bytes to
migrate from the source block reserve, and this however may result in an
underflow in case the space added to the transaction block reserve ended
up being used by another task that has not reserved enough space for its
own use - examples are tasks doing reflinks or hole punching because they
end up calling btrfs_replace_file_extents() -> btrfs_drop_extents() and
may need to modify/COW a variable number of leaves/paths, so they keep
trying to use space from the transaction block reserve when they need to
COW an extent buffer, and may end up trying to use more space then they
have reserved (1 unit/path only for removing file extent items).
This can be avoided by simply reserving space first without adding it to
the transaction block reserve, then add the space for delayed refs to the
delayed refs block reserve and finally add the remaining reserved space
to the transaction block reserve. This also makes the code a bit shorter
and simpler. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When writing back an inode and performing an fsync on it concurrently, a
deadlock issue may arise as shown below. In each writeback iteration, a
clean inode is requeued to the wb->b_dirty queue due to non-zero
pages_skipped, without anything actually being written. This causes an
infinite loop and prevents the plug from being flushed, resulting in a
deadlock. We now avoid requeuing the clean inode to prevent this issue.
wb_writeback fsync (inode-Y)
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs with page-X added into plug->mq_list // f2fs node page-X with PG_writeback
filemap_fdatawrite
__filemap_fdatawrite_range // write inode-Y with sync_mode WB_SYNC_ALL
do_writepages
f2fs_write_data_pages
__f2fs_write_data_pages // wb_sync_req[DATA]++ for WB_SYNC_ALL
f2fs_write_cache_pages
f2fs_write_single_data_page
f2fs_do_write_data_page
f2fs_outplace_write_data
f2fs_update_data_blkaddr
f2fs_wait_on_page_writeback
wait_on_page_writeback // wait for f2fs node page-X
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes
. __writeback_single_inode // write inode-Y with sync_mode WB_SYNC_NONE
. . do_writepages
. . f2fs_write_data_pages
. . . __f2fs_write_data_pages // skip writepages due to (wb_sync_req[DATA]>0)
. . . wbc->pages_skipped += get_dirty_pages(inode) // wbc->pages_skipped = 1
. if (!(inode->i_state & I_DIRTY_ALL)) // i_state = I_SYNC | I_SYNC_QUEUED
. total_wrote++; // total_wrote = 1
. requeue_inode // requeue inode-Y to wb->b_dirty queue due to non-zero pages_skipped
if (progress) // progress = 1
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Signed-off-by: Chunhai Guo <guochunhai@vivo.com> Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230916045131.957929-1-guochunhai@vivo.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On mapphone devices we may get lots of noise on the micro-USB port in debug
uart mode until the phy-cpcap-usb driver probes. Let's limit the noise by
using overrun-throttle-ms.
Note that there is also a related separate issue where the charger cable
connected may cause random sysrq requests until phy-cpcap-usb probes that
still remains.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The BlueField power handling driver (pwr-mlxbf.c) provides
functionality for both BlueField-2 and BlueField-3 based
platforms. This driver also depends on the SoC-specific
BlueField GPIO driver, whether gpio-mlxbf2 or gpio-mlxbf3.
This patch extends the Kconfig definition to include the
dependency on the gpio-mlxbf3 driver, if applicable.
Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Link: https://lore.kernel.org/r/20230823133743.31275-1-davthompson@nvidia.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use devm_regulator_get_enable() instead of open coded get, enable,
add-action-to-disable-at-detach - pattern. Also drop the seemingly unused
struct member 'dvdd'.
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and
calls iio_push_to_buffers_with_timestamp() without making sure the
`indio_dev` stays in buffer mode. There is a race if `indio_dev` exits
buffer mode right before cros_ec_sensors_push_data() accesses them.
An use-after-free on `indio_dev->active_scan_mask` was observed. The
call trace:
[...]
_find_next_bit
cros_ec_sensors_push_data
cros_ec_sensorhub_event
blocking_notifier_call_chain
cros_ec_irq_thread
It was caused by a race condition: one thread just freed
`active_scan_mask` at [1]; while another thread tried to access the
memory at [2].
Fix it by calling iio_device_claim_buffer_mode() to ensure the
`indio_dev` can't exit buffer mode during cros_ec_sensors_push_data().
These APIs are analogous to iio_device_claim_direct_mode() and
iio_device_release_direct_mode() but, as the name suggests, with the
logic flipped. While this looks odd enough, it will have at least two
users (in following changes) and it will be important to move the IIO
mlock to the private struct.
Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221012151620.1725215-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 7771c8c80d62 ("iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()") Signed-off-by: Sasha Levin <sashal@kernel.org>
We now get errors on system suspend if no_console_suspend is set as
reported by Thomas. The errors started with commit 20a41a62618d ("serial:
8250_omap: Use force_suspend and resume for system suspend").
Let's fix the issue by checking for console_suspend_enabled in the system
suspend and resume path.
Note that with this fix the checks for console_suspend_enabled in
omap8250_runtime_suspend() become useless. We now keep runtime PM usage
count for an attached kernel console starting with commit bedb404e91bb
("serial: 8250_port: Don't use power management for kernel console").
Fixes: 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend") Cc: stable <stable@kernel.org> Cc: Udit Kumar <u-kumar1@ti.com> Reported-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Thomas Richard <thomas.richard@bootlin.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230926061319.15140-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We must idle the uart only after serial8250_unregister_port(). Otherwise
unbinding the uart via sysfs while doing cat on the port produces an
imprecise external abort:
mem_serial_in from omap_8250_pm+0x44/0xf4
omap_8250_pm from uart_hangup+0xe0/0x194
uart_hangup from __tty_hangup.part.0+0x37c/0x3a8
__tty_hangup.part.0 from uart_remove_one_port+0x9c/0x22c
uart_remove_one_port from serial8250_unregister_port+0x60/0xe8
serial8250_unregister_port from omap8250_remove+0x6c/0xd0
omap8250_remove from platform_remove+0x28/0x54
Turns out the driver needs to have runtime PM functional before the
driver probe calls serial8250_register_8250_port(). And it needs
runtime PM after driver remove calls serial8250_unregister_port().
On probe, we need to read registers before registering the port in
omap_serial_fill_features_erratas(). We do that with custom uart_read()
already.
On remove, after serial8250_unregister_port(), we need to write to the
uart registers to idle the device. Let's add a custom uart_write() for
that.
Currently the uart register access depends on port->membase to be
initialized, which won't work after serial8250_unregister_port().
Let's use priv->membase instead, and use it for runtime PM related
functions to remove the dependency to port->membase for early and
late register access.
Note that during use, we need to check for a valid port in the runtime PM
related functions. This is needed for the optional wakeup configuration.
We now need to set the drvdata a bit earlier so it's available for the
runtime PM functions.
With the port checks in runtime PM functions, the old checks for priv in
omap8250_runtime_suspend() and omap8250_runtime_resume() functions are no
longer needed and are removed.
Commit 44b27aec9d96 ("serial: core, 8250: set RS485 termination GPIO in
serial core") enabled support for RS485 termination GPIOs behind i2c
expanders by setting the GPIO outside of the critical section protected
by the port spinlock. Access to the i2c expander may sleep, which
caused a splat with the port spinlock held.
Commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in
driver-specific way") erroneously regressed that by spinlocking the
GPIO manipulation again.
Fix by moving uart_rs485_config() (the function manipulating the GPIO)
outside of the spinlocked section and acquiring the spinlock inside of
uart_rs485_config() for the invocation of ->rs485_config() only.
This gets us one step closer to pushing the spinlock down into the
->rs485_config() callbacks which actually need it. (Some callbacks
do not want to be spinlocked because they perform sleepable register
accesses, see e.g. sc16is7xx_config_rs485().)
The USB2412 is a 2-Port USB 2.0 hub controller that provides a reset pin
and a single 3v3 powre source, which makes it suitable to be controlled
by the onboard_hub driver.
This hub has the same reset timings as USB2514/2517 and the same
onboard hub specific-data can be reused for USB2412.
Genesys Logic GL3523 is a 4-port USB 3.1 hub that has a reset pin to
toggle and a 5.0V core supply exported though an integrated LDO is
available for powering it.
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
[m.felsch@pengutronix.de: include review feedback & port to 6.4] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230623142228.4069084-2-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e59e38158c61 ("usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub") Signed-off-by: Sasha Levin <sashal@kernel.org>
Genesys Logic GL852G is a 4-port USB 2.0 STT hub that has a reset pin to
toggle and a 5.0V core supply exported though an integrated LDO is
available for powering it.
Add the support for this hub, for controlling the reset pin and the core
power supply.
Genesys Logic GL850G is a 4-port USB 2.0 STT hub that has a reset pin to
toggle and a 3.3V core supply exported (although an integrated LDO is
available for powering it with 5V).
Add the support for this hub, for controlling the reset pin and the core
power supply.
It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:
[ ~]$ ip link add dev eth0 type dummy
[ ~]$ ip netns add test
[ ~]$ ip -netns test link add dev ethX netns test type dummy
[ ~]$ ip -netns test link property add dev ethX altname eth0
[ ~]$ ip -netns test link set dev ethX netns 1
[ ~]$ ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
...
5: ethX: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
altname eth0
Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.
Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.
Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:
5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff
[ ~]# ip link set dev eth0 netns 1 name eth1
ip monitor inside netns:
Deleted inet eth0
Deleted inet6 eth0
Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7
Name is reported as eth1 in old netns for ifindex 5, already renamed.
Fixes: d90310243fd7 ("net: device name allocation cleanups") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.
Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags") Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.
Reported-by: Justin Chen <justin.chen@broadcom.com> Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nf_tables_abort_release() path calls nft_set_elem_destroy() for
NFT_MSG_NEWSETELEM which releases the element, however, a reference to
the element still remains in the working copy.
Fixes: ebd032fa8818 ("netfilter: nf_tables: do not remove elements if set backend implements .abort") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pipapo set backend maintains two copies of the datastructure, removing
the elements from the copy that is going to be discarded slows down
the abort path significantly, from several minutes to few seconds after
this patch.
rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the
size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether
or not the device has offload_xstats enabled.
However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for
that field uncondtionally.
This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.
Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.
Fixes: e8dbde59ca3f ("selftests: netfilter: Test nf_tables audit logging") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In file included from include/trace/define_trace.h:102,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
402 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
In file included from include/trace/define_trace.h:103,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
51 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.
Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.
Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Theune says:
I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
leaving me with a non-functional uplink on a remote router.
A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
The parent will have vttree_insert() called on it in init_vf(),
but will not have vttree_remove() called on it in update_vf()
because it does not have the HFSC_FSC flag set.
The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.
Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.
Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.
v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)
Cc: Christian Theune <ct@flyingcircus.io> Cc: Budimir Markovic <markovicbudimir@gmail.com> Fixes: b3d26c5702c7 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve") Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 429e3d123d9a ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).
Fixes: 429e3d123d9a ("bonding: Fix extraction of ports from the packet headers") Signed-off-by: Jiri Wiesner <jwiesner@suse.de> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.
So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.
And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 6759 Comm: kworker/u4:15 Not tainted 6.6.0-rc4-syzkaller-00029-gcbf3a2cb156a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker
Fixes: 436c3b66ec98 ("ipv4: Invalidate nexthop cache nh_saddr more correctly.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231017192304.82626-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: fb7589a16216 ("tun: Add ability to create tun device with given index") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20231016180851.3560092-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported a warning [0] introduced by commit c48ef9c4aed3 ("tcp: Fix
bind() regression for v4-mapped-v6 non-wildcard address.").
After the cited commit, a v4 socket's address matches the corresponding
v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa.
During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses
bhash and conflicts properly without checking bhash2 so that we need not
check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in
inet_bind2_bucket_match_addr(). However, the repro shows that we need
to check that in a no-conflict case.
The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls
listen() for the first socket:
The second socket should belong to the first socket's tb2, but the second
bind() creates another tb2 bucket because inet_bind2_bucket_find() returns
NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the
corresponding v4 address tb2.
bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X)
Then, listen() for the first socket calls inet_csk_get_port(), where the
v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered.
To avoid that, we need to check if v4-mapped-v6 sk address matches with
the corresponding v4 address tb2 in inet_bind2_bucket_match().
The same checks are needed in inet_bind2_bucket_addr_match() too, so we
can move all checks there and call it from inet_bind2_bucket_match().
Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr
and not of sockets in the bucket. This could be refactored later by
defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending
::ffff: when creating v4 tb2.
In commit 75eefc6c59fd ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe14f ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b015 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When either reset- or shutdown-gpio have are initially deasserted,
e.g. after a reboot - or when the hardware does not include pull-down,
there will be a short toggle of both IOs to logical 0 and back to 1.
It seems that the rfkill default is unblocked, so the driver should not
glitch to output low during probe.
It can lead e.g. to unexpected lte modem reconnect:
[1] root@localhost:~# dmesg | grep "usb 2-1"
[ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 21.215278] usb 2-1: USB disconnect, device number 2
[ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
The glitch has been discovered on an arm64 board, now that device-tree
support for the rfkill-gpio driver has finally appeared :).
Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to
GPIOD_ASIS to avoid any glitches.
The rfkill driver will set the intended value during rfkill_sync_work.
Since wiphy work items can run pretty much arbitrary
code in the stack/driver, it can take longer to run
all of this, so we shouldn't be using system_wq via
schedule_work(). Also, we lock the wiphy (which is
the reason this exists), so use system_unbound_wq.
Reported-and-tested-by: Kalle Valo <kvalo@kernel.org> Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
value changed: 0x00000000000010d7 -> 0x00000000000010d8
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 23987 Comm: syz-executor.5 Not tainted 6.5.0-syzkaller-10885-g0468be89b3fa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
This means we must use a per-netns idx_generator variable,
instead of a static one.
Alternative would be to use an atomic variable.
syzbot reported:
BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert
write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0:
xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline]
xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1:
xfrm_sk_policy_insert+0x13e/0x640
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00006ad8 -> 0x00006b18
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes: 1121994c803f ("netns xfrm: policy insertion in netns") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot complains about a race in xfrm_lookup_with_ifid() [1]
When preparing commit 0a9e5794b21e ("xfrm: annotate data-race
around use_time") I thought xfrm_lookup_with_ifid() was modifying
a still private structure.
[1]
BUG: KCSAN: data-race in xfrm_lookup_with_ifid / xfrm_lookup_with_ifid
write to 0xffff88813ea41108 of 8 bytes by task 8150 on cpu 1:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
write to 0xffff88813ea41108 of 8 bytes by task 15867 on cpu 0:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000651cd9d1 -> 0x00000000651cd9d2
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15867 Comm: kworker/u4:58 Not tainted 6.6.0-rc4-syzkaller-00016-g5e62ed3b1c8a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg2 wg_packet_handshake_send_worker
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <davem@davemloft.net> Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing code to release resources on bind errors, including the
references taken by wcd938x_sdw_device_get() which also need to be
dropped on unbind().
Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver") Cc: stable@vger.kernel.org # 5.14 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231003155558.27079-4-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
