RISC-V: xtheadfmemidx: Use fp register in mnemonics
Although the encoding for scalar and fp registers is identical,
we should follow common pratice and use fp register names
when referencing fp registers.
The xtheadmemidx extension consists of indirect load/store instructions
which all load to or store from fp registers.
Let's use fp register names in this case and adjust the test cases
accordingly.
gas/
* testsuite/gas/riscv/x-thead-fmemidx-fail.l: Updated since rd need to
be float register.
* testsuite/gas/riscv/x-thead-fmemidx-fail.s: Likewise.
* testsuite/gas/riscv/x-thead-fmemidx.d: Likewise.
* testsuite/gas/riscv/x-thead-fmemidx.s: Likewise.
opcodes/
* riscv-opc.c (riscv_opcodes): Updated since rd need to be float register.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Simon Marchi [Fri, 4 Nov 2022 14:07:09 +0000 (10:07 -0400)]
gdb/linux-nat: get core count using /sys/devices/system/cpu/possible
I get this test failure on my CI;
FAIL: gdb.base/info-os.exp: get process list
The particularity of this setup is that builds are done in containers
who are allocated 4 CPUs on a machine that has 40. The code in
nat/linux-osdata.c fails to properly fetch the core number for each
task.
linux_xfer_osdata_processes uses `sysconf (_SC_NPROCESSORS_ONLN)`, which
returns 4, so it allocates an array of 4 integers. However, the core
numbers read from /proc/pid/task/tid/stat, by function
linux_common_core_of_thread, returns a value anywhere between 0 and 39.
The core numbers above 3 are therefore ignored, many processes end up
with no core value, and the regexp in the test doesn't match (it
requires an integer as the core field).
The way this the CPUs are exposed to the container is that the container
sees 40 CPUs "present" and "possible", but only 4 arbitrary CPUs
actually online:
The solution proposed in this patch is to find out the number of
possible CPUs using /sys/devices/system/cpu/possible. In practice, this
will probably always contain `0-N`, where N is the number of CPUs, minus
one. But the documentation [1] doesn't such guarantee, so I'll assume
that it can contain a more complex range list such as `2,4-31,32-63`,
like the other files in that directory can have. The solution is to
iterate over these numbers to find the highest possible CPU id, and
use that that value plus one as the size of the array to allocate.
Simon Marchi [Fri, 4 Nov 2022 13:39:12 +0000 (09:39 -0400)]
gdbsupport, gdb: add read_text_file_to_string, use it in linux_common_core_of_thread
I would like to add more code to nat/linux-osdata.c that reads an entire
file from /proc or /sys and processes it as a string afterwards. I
would like to avoid duplicating the somewhat error-prone code that reads
an entire file to a buffer. I think we should have a utility function
that does that.
Add read_file_to_string to gdbsupport/filestuff.{c,h}, and make
linux_common_core_of_thread use it. I want to make the new function
return an std::string, and because strtok doesn't play well with
std::string (it requires a `char *`, std::string::c_str returns a `const
char *`), change linux_common_core_of_thread to use std::string methods
instead.
Approved-By: Tom Tromey <tom@tromey.com>
Change-Id: I1793fda72a82969c28b944a84acb953f74c9230a
Tom de Vries [Tue, 8 Nov 2022 17:47:24 +0000 (18:47 +0100)]
[gdb/cli] Make quit really quit after remote connection closed
Consider a hello world a.out, started using gdbserver:
...
$ gdbserver --once 127.0.0.1:2345 ./a.out
Process ./a.out created; pid = 15743
Listening on port 2345
...
that we can connect to using gdb:
...
$ gdb -ex "target remote 127.0.0.1:2345"
Remote debugging using 127.0.0.1:2345
Reading /home/vries/a.out from remote target...
...
0x00007ffff7dd4550 in _start () from target:/lib64/ld-linux-x86-64.so.2
(gdb)
...
After that, we can for instance quit with confirmation:
...
(gdb) quit
A debugging session is active.
Inferior 1 [process 16691] will be killed.
Quit anyway? (y or n) y
$
...
Or, kill with confirmation and quit:
...
(gdb) kill
Kill the program being debugged? (y or n) y
[Inferior 1 (process 16829) killed]
(gdb) quit
$
...
Or, monitor exit, kill with confirmation, and quit:
...
(gdb) monitor exit
(gdb) kill
Kill the program being debugged? (y or n) y
Remote connection closed
(gdb) quit
$
...
But when doing monitor exit followed by quit with confirmation, we get the gdb
prompt back, requiring us to do quit once more:
...
(gdb) monitor exit
(gdb) quit
A debugging session is active.
Inferior 1 [process 16944] will be killed.
Quit anyway? (y or n) y
Remote connection closed
(gdb) quit
$
...
So, the first quit didn't quit. This happens as follows:
- quit_command calls query_if_trace_running
- a TARGET_CLOSE_ERROR is thrown
- it's caught in remote_target::get_trace_status, but then
rethrown because it's TARGET_CLOSE_ERROR
- catch_command_errors catches the error, at which point the quit command
has been aborted.
The TARGET_CLOSE_ERROR is defined as:
...
/* Target throwing an error has been closed. Current command should be
aborted as the inferior state is no longer valid. */
TARGET_CLOSE_ERROR,
...
so in a way this is expected behaviour. But aborting quit because the inferior
state (which we've already confirmed we're not interested in) is no longer
valid, and having to type quit again seems pointless.
Furthermore, the purpose of not catching errors thrown by
query_if_trace_running as per commit 2f9d54cfcef ("make -gdb-exit call
disconnect_tracing too, and don't lose history if the target errors on
"quit""), was to make sure that error (_("Not confirmed.") had effect.
Fix this in quit_command by catching only the TARGET_CLOSE_ERROR exception
during query_if_trace_running and reporting it:
...
(gdb) monitor exit
(gdb) quit
A debugging session is active.
Inferior 1 [process 19219] will be killed.
Quit anyway? (y or n) y
Remote connection closed
$
...
Tested on x86_64-linux.
PR server/15746
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=15746 Approved-By: Tom Tromey <tom@tromey.com>
Tom de Vries [Tue, 8 Nov 2022 17:40:25 +0000 (18:40 +0100)]
[gdb/testsuite] Remove test-case from test name
Remove test-cases from test-names, such that we don't have the redundant:
...
PASS: gdb.base/corefile.exp: backtrace in corefile.exp
...
but simply:
...
PASS: gdb.base/corefile.exp: backtrace
...
Fixed all instances found using:
...
$ grep ":.*:.*\.exp" gdb.sum
...
Tom de Vries [Tue, 8 Nov 2022 15:28:11 +0000 (16:28 +0100)]
[gdb/testsuite] Fix find_core_file for core named core
With test-case gdb.base/bigcore.exp I run into:
...
(gdb) PASS: gdb.base/bigcore.exp: get inferior pid
signal SIGABRT^M
Continuing with signal SIGABRT.^M
^M
Program terminated with signal SIGABRT, Aborted.^M
The program no longer exists.^M
(gdb) PASS: gdb.base/bigcore.exp: signal SIGABRT
UNTESTED: gdb.base/bigcore.exp: can't generate a core file
...
due to find_core_file returning "".
There is a core file name core:
...
$ ls ./outputs/gdb.base/bigcore
bigcore bigcore.corefile core gdb.cmd.1 gdb.in.1 gdbserver.cmd.1
...
but it's not found.
The problem is this statement:
...
lappend files [list ${::testfile}.core core]
...
which adds a single list item "${::testfile}.core core".
Fix this in the most readable way:
...
lappend files ${::testfile}.core
lappend files core
...
The intention of this code seems to be to indicate that this insn
should not be used and produces undefined behavior, so instead of
setting registers to bogus values, call Unpredictable. This fixes
build warnings due to 32-bit/64-bit type conversions, and outputs
a log message for users at runtime instead of silent corruption.
Mike Frysinger [Tue, 8 Nov 2022 07:09:06 +0000 (14:09 +0700)]
sim: drop unused CORE_ADDR_TYPE
This hasn't been used by gdb in decades, and doesn't make sense with
a standalone sim program/library where the ABI is fixed. So punt it
to simplify the code.
Mike Frysinger [Mon, 7 Nov 2022 16:07:43 +0000 (23:07 +0700)]
sim: v850: drop subdir configure logic
We've been using this only to set the default word size to 32. We
can easily move this into the makefile via a -D compiler flag and
clean up the build logic quite a bit.
Mike Frysinger [Mon, 7 Nov 2022 16:05:46 +0000 (23:05 +0700)]
sim: mn10300: drop subdir configure logic
We've been using this only to set the default word size to 32. We
can easily move this into the makefile via a -D compiler flag and
clean up the build logic quite a bit.
Mike Frysinger [Mon, 7 Nov 2022 16:04:25 +0000 (23:04 +0700)]
sim: or1k: drop subdir configure logic
We've been using this only to set the default word size to 32. We
can easily move this into the makefile via a -D compiler flag and
clean up the build logic quite a bit.
Mike Frysinger [Mon, 7 Nov 2022 15:59:30 +0000 (22:59 +0700)]
sim: bpf: drop subdir configure logic
We've been using this only to set the default word size to 64. We
can easily move this into the makefile via a -D compiler flag and
clean up the build logic quite a bit.
Mike Frysinger [Mon, 7 Nov 2022 15:56:58 +0000 (22:56 +0700)]
sim: riscv: drop subdir configure logic
We've been using this only to set the default word size to 32-vs-64
based on the $target. We can easily merge this with the top-level
configure script to clean things up a bit.
This patch changes the GDB build system in order to use libtool to
link the several built executables. This makes it possible to refer
to libtool libraries (.la files) in CLIBS.
As an application of the above,
BFD now refers to ../libbfd/libbfd.la
OPCODES now refers to ../opcodes/libopcodes.la
LIBBACKTRACE_LIB now refers to ../libbacktrace/libbacktrace.la
LIBCTF now refers to ../libctf/libctf.la
NOTE1: The addition of libtool adds a few new configure-time options
to GDB. Among these, --enable-shared and --disable-shared, which were
previously ignored. Now GDB shall honor these options when linking,
picking up the right version of the referred libtool libraries
automagically.
NOTE2: I have not tested the insight build.
NOTE3: For regenerating configure I used an environment with Autoconf
2.69 and Automake 1.15.1. This should match the previously
used version as announced in the configure script.
NOTE4: Now the installed shared objects libbfd.so, libopcodes.so and
libctf.so are used by gdb if binutils is installed with
--enable-shared.
Testing performed:
- --enable-shared and --disable-shared (the default in binutils) work
as expected: the linked executables link with the archive or shared
libraries transparently.
- Makefile.in modified for EXEEXT = .exe. It installs the binaries
just fine. The installed gdb.exe runs fine.
- Native build regtested in x86_64. No regressions found.
- Cross build for aarch64-linux-gnu built to exercise
program_transform_name and friends. The installed
aarch64-linux-gnu-gdb runs fine.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29372 Approved-By: Simon Marchi <simon.marchi@efficios.com>
Simon Marchi [Mon, 7 Nov 2022 14:38:12 +0000 (09:38 -0500)]
gdb/testsuite: use a more unique name in gdb.mi/mi-breakpoint-multiple-locations.exp
I see failures in this test, due to the function name "add" being too
generic, and unexpected breakpoint locations being found in my
libstdc++, such as (wrapped for readability):
Pedro Alves [Fri, 14 Oct 2022 19:17:36 +0000 (20:17 +0100)]
Don't explicitly set clone child ptrace options
linux_handle_extended_wait calls target_post_attach if we're handling
a PTRACE_EVENT_CLONE, and libthread_db.so isn't active.
target_post_attach just calls linux_init_ptrace_procfs to set the
lwp's ptrace options. However, this is completely unnecessary,
because, as man ptrace [1] says, options are inherited:
"Flags are inherited by new tracees created and "auto-attached" via
active PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, or PTRACE_O_TRACECLONE
options."
Mike Frysinger [Mon, 7 Nov 2022 14:30:10 +0000 (21:30 +0700)]
sim: build: add a proper var for enabled arches
The install code was using $SUBDIRS to track all enabled arches. This
works, but isn't great if we want to add a subdir that isn't an arch
port, or as we merge the subdirs into the top-level. Create a new var
explicitly to track the list of enabled arches instead.
Christophe Lyon [Fri, 4 Nov 2022 10:06:47 +0000 (11:06 +0100)]
configure: require libzstd >= 1.4.0
gas uses ZSTD_compressStream2 which is only available with libzstd >=
1.4.0, leading to build errors when an older version is installed.
This patch updates the check libzstd presence to check its version is
>= 1.4.0. However, since gas seems to be the only component requiring
such a recent version this may imply that we disable ZSTD support for
all components although some would still benefit from an older
version.
I ran 'autoreconf -f' in all directories containing a configure.ac
file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed
several errors from autoheader in readline, as well as warnings in
intl, but they are unrelated to this patch.
Clément Chigot [Fri, 4 Nov 2022 15:52:05 +0000 (16:52 +0100)]
ld/testsuite: skip tests related to -shared when disabled
Call the helper function "check_shared_lib_support" to ensure -shared
is enabled before launching ld-shared, ld-elfweak and ld-elfvers.
This allows to catch custom targets explicitly disabling it.
Tsukasa OI [Sat, 10 Sep 2022 08:32:17 +0000 (08:32 +0000)]
RISC-V: Remove RV32EF conflict
Despite that the RISC-V ISA Manual version 2.2 prohibited "RV32EF", later
versions beginning with the version 20190608-Base-Ratified removed this
restriction. Because the 'E' extension is still a draft, the author chose
to *just* remove the conflict (not checking the ISA version).
Note that, because RV32E is only used with a soft-float calling convention,
there's no valid official ABI for RV32EF. It means, even if we can assemble
a program with -march=rv32ef -mabi=ilp32e, floating-point registers are kept
in an unmanaged state (outside ABI management).
The purpose of this commit is to suppress unnecessary errors while parsing
an ISA string and/or disassembling, not to allow hard-float with RVE.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): Accept RV32EF
because only older specifications disallowed it.
gas/ChangeLog:
* testsuite/gas/riscv/march-fail-rv32ef.d: Remove as not directly
prohibited.
* testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
Mike Frysinger [Sun, 6 Nov 2022 14:08:04 +0000 (21:08 +0700)]
sim: build: stop passing down SIM_PRIMARY_TARGET
This was needed when the install step was run in subdirs, but now
that we process that entirely in the top-level, we don't need to
pass this down, so drop it.
Tom Tromey [Wed, 21 Sep 2022 16:46:51 +0000 (10:46 -0600)]
Deprecate MI version 1
MI version 1 is long since obsolete. Rather than remove it
immediately (though I did send a patch for that), instead let's
deprecate it in GDB 13 and then remove it for GDB 14.
This version of the patch incorporates Simon's warning change, and
Luis' recommendation to mention the gdb versions here.
Mike Frysinger [Thu, 3 Nov 2022 11:19:13 +0000 (18:19 +0700)]
sim: run: move linking into top-level
Automake will run each subdir individually before moving on to the next
one. This means that the linking phase, a single threaded process, will
not run in parallel with anything else. When we have to link ~32 ports,
that's 32 link steps that don't take advantage of parallel systems. On
my really old 4-core system, this cuts a multi-target build from ~60 sec
to ~30 sec. We eventually want to move all compile+link steps to this
common dir anyways, so might as well move linking now for a nice speedup.
We use noinst_PROGRAMS instead of bin_PROGRAMS because we're taking care
of the install ourselves rather than letting automake process it.
Mike Frysinger [Sat, 5 Nov 2022 07:35:00 +0000 (14:35 +0700)]
sim: build: move install steps to the top-level
We still have to maintain custom install rules due to how we rename
arch-specific files with an arch prefix in their name, but we can at
least unify the logic in the common dir.
Mike Frysinger [Sat, 5 Nov 2022 03:02:58 +0000 (10:02 +0700)]
sim: ppc: drop unused /dev/zero logic
Nothing in the tree checks this option, or has checked for decades.
The pre-cvs-import ChangeLog suggests this was added & removed back
then, but can't be sure as that history doesn't exist in the VCS.
Mike Frysinger [Sat, 5 Nov 2022 02:52:29 +0000 (09:52 +0700)]
sim: ppc: delete unused host bitsize settings
Nothing checks this define anywhere, so drop all the logic. We don't
want this to be a configure option in the first place as all such usage
should be automatic & following proper types.
Mike Frysinger [Sat, 5 Nov 2022 02:29:17 +0000 (09:29 +0700)]
sim: ppc: inline the sim-packages option
This has only ever had a single option that's enabled by default.
The objects it adds are pretty small and don't add overhead at
runtime if it isn't used, so just enable it all the time to make
the build code simpler.
Carl Love [Fri, 4 Nov 2022 16:14:01 +0000 (12:14 -0400)]
PowerPC update comments for the MMA instruction name changes.
The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*,
pmxvi8ger4*, and pmxvi16ger2* instructions were officially changed to
pmdmxbf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*,
pmdmxvi16ger* respectively. The old mnemonics are still supported by the
assembler as extended mnemonics. The disassembler generates the new
mnemonics. The name changes occurred in commit:
PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions
gas/
* config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
* testsuite/gas/ppc/rfc02658.s: New test.
* testsuite/gas/ppc/rfc02658.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
Carl Love [Fri, 4 Nov 2022 16:13:52 +0000 (12:13 -0400)]
PowerPC fix for the gdb.arch/powerpc-power10.exp test.
The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*,
pmxvi8ger4*, pmxvi16ger2* instructions were officially changed to
pmdmxvf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*,
pmdmxvi16ger* respectively. The old mnemonics are still supported by the
assembler as extended mnemonics. The disassembler generates the new
mnemonics. The name changes occurred in commit:
PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions
gas/
* config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
* testsuite/gas/ppc/rfc02658.s: New test.
* testsuite/gas/ppc/rfc02658.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
The above commit results in about 224 failures on Power 10 since the
disassembled names do not match the expected names in the test. This
patch updates the expected names in the test to match the values produced
by the disassembler.
This patch updates file gdb.arch/powerpc-power10.exp with the new expected
values to the instructions. The comment giving the name of the instruction
for each binary value in the file gdb.arch/powerpc-power10.c is updated
with the new name. There are no functional changes in file
gdb.arch/powerpc-power10.c.
Carl Love [Fri, 4 Nov 2022 16:06:37 +0000 (12:06 -0400)]
Powerpc fix for gdb.base/unwind-on-each-insn.exp
The test disassembles function foo and searches for the line
"End of assembler dump" to determing the last address in the function. The
assumption is the last instruction will be given right before the line
"End of assembler dump". This assumption fails on PowerPC.
The PowerPC disassembly of the function foo looks like:
Dump of assembler code for function foo:
# => 0x00000000100006dc <+0>: std r31,-8(r1)
# 0x00000000100006e0 <+4>: stdu r1,-48(r1)
# 0x00000000100006e4 <+8>: mr r31,r1
# 0x00000000100006e8 <+12>: nop
# 0x00000000100006ec <+16>: addi r1,r31,48
# 0x00000000100006f0 <+20>: ld r31,-8(r1)
# 0x00000000100006f4 <+24>: blr
# 0x00000000100006f8 <+28>: .long 0x0
# 0x00000000100006fc <+32>: .long 0x0
# 0x0000000010000700 <+36>: .long 0x1000180
# End of assembler dump.
The blr instruction is the last instruction in function foo. The lines
with .long following the blr instruction need to be ignored.
This patch adds a new condition to the gdb_test_multiple "disassemble foo"
test to ignore the lines with the .long.
The patch has been tested on PowerPC and Intel X86-64.
Bruno Larsen [Thu, 3 Nov 2022 09:01:42 +0000 (10:01 +0100)]
gdb/testsuite: add KFAILs to gdb.reverse/step-reverse.exp
Recent changes to gdb.reverse/step-reverse.exp revealed the latent bug
PR record/29745, where we can't skip one funcion forward if we're using
native-gdbserver. This commit just adds kfails to the test.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29745 Approved-By: Simon Marchi <simon.marchi@efficios.com>
Some people were seeing their builds failing with complaints about a
possible uninitialized variable usage. I previously fixed an instance
of this issue in this commit:
opcodes/arm: silence compiler warning about uninitialized variable use
which did fix the build problems that the sourceware buildbot was
hitting, however, an additional instance of the same problem was
brought to my attention, and that is fixed in this commit.
Where commit 2df82cd4b4 fixed the uninitialized variable problem in
print_mve_unpredictable, this commit fixes the same problem in
print_mve_undefined.
As with the previous commit, I don't believe we could really ever get
an uninitialized variable usage, based on the current usage of the
function, so I have just initialized the reason variable to "??".
Mike Frysinger [Thu, 3 Nov 2022 13:26:01 +0000 (20:26 +0700)]
sim: build: remove various obsolete generation dep variables
These manual settings were necessary when we weren't doing automatic
header dependency tracking. That was changed a while ago, and we use
automake now to do it all for us. As a result, many of these vars
aren't even referenced anymore.
Further, some of the source file generation (e.g. .c files, or igen,
or cgen outputs) were moved to the common automake build, and it takes
care of dependency tracking for us with the object files.
Mike Frysinger [Thu, 3 Nov 2022 09:53:21 +0000 (16:53 +0700)]
sim: drop -lm from SIM_EXTRA_LIBS
We have configure tests for this in the top-level configure script
to link this when necessary, so we don't need to explicitly list it
for specific ports.
Mike Frysinger [Thu, 3 Nov 2022 08:21:12 +0000 (15:21 +0700)]
sim: build: change AC_CHECK_LIB to AC_SEARCH_LIBS
With more C libraries moving functions entirely into the main -lc,
change the AC_CHECK_LIB calls to AC_SEARCH_LIBS so we look in there
first and avoid extra linkage when possible.
Mike Frysinger [Thu, 3 Nov 2022 07:58:29 +0000 (13:43 +0545)]
sim: build: drop duplicate $(LIBS) usage
COMMON_LIBS is set to $(LIBS), and CONFIG_LIBS is set to that plus
@LIBS@. This leds to the values being used twice. Inline the
CONFIG_LIBS variable without @LIBS@ since it's used only once.
Mike Frysinger [Thu, 3 Nov 2022 07:26:41 +0000 (13:11 +0545)]
sim: build: switch to libtool for linking
The top-level already sets up a libtool script for the host, so use
that when linking rather than invoking CC directly. This will also
happen when we (someday) move the building to pure automake.
Mike Frysinger [Wed, 2 Nov 2022 14:42:54 +0000 (20:27 +0545)]
sim: testsuite: fix cris stat3 in diff setups
This test uses the test itself as an input to stating regular files.
This gets funky though: when we run check in parallel, the output
object dir is the subdir that matches the .exp file. When we run
with -j1, the output object dir is the sim builddir itself.
The old test would append argv[0] to find the file, while the new
test uses basename on it. Each method works in only one of the
aforementioned build scenarios. Rather than complicate this any
more, switch to a different file that we know will always exist:
the Makefile.
Mike Frysinger [Wed, 2 Nov 2022 14:40:27 +0000 (20:25 +0545)]
sim: testsuite: fix cris badarch in multi-target builds
This test assumes that /bin/sh will never be a CRIS ELF by way of
assuming that the current bfd cannot load it (since a basic cris
cross-compiler only understands CRIS ELFs). In a multi-target
build though, bfd understands just about every ELF out there, so
we're able to read the /bin/sh format before failing at a diff
point in the cris code.
Let's switch to using / instead since it'll fail for a similar
reason (at least similar enough for what this test is testing).
Mike Frysinger [Thu, 3 Nov 2022 18:07:53 +0000 (01:07 +0700)]
sim: m32c/rx: drop useless $(ENDLIST)
This is used to allow for dangling \ in object lists, but these are the
only ports that do it, and it isn't really necessary. Punt it to keep
the various makefiles harmonized.
Mike Frysinger [Thu, 3 Nov 2022 17:25:32 +0000 (00:25 +0700)]
sim: erc32: link sis to run program
The erc32 sim does a lot itself, including handling of the CLI. It
used to provide a run-compatible interface in the pre-nrun days, but
it was dropped when the old run interface was punted. Since the old
commit 465fb143c87076b6416a8d0d5dd79bb016060fe3 ("sim: make nrun the
default run program"), the erc32 run & sis programs have been the
same, and erc32 hasn't provide a real run-compatible interface.
Simplify this by linking the two programs via ln/cp instead of running
the linking phase twice to produce the same result. If/when we fix up
the erc32 port to have a proper run interface, it should be easy to
split these back apart into real programs.
Note: the interf.o reference in here is a bit of a misdirect. Since
that object is placed into libsim.a, it's never been linked into the
programs since the linker ignores objects that aren't referenced, and
only gdb uses those symbols.
Mike Frysinger [Thu, 3 Nov 2022 13:58:23 +0000 (20:58 +0700)]
sim: v850: switch to standard (high-level) trace defines
The v850 port uses -DDEBUG to control whether to enable internal tracing.
We already have such options via the common trace framework, and those
can be controlled at build time via configure flags (which the v850 code
currently cannot). So switch it over to WITH_TRACE_ANY_P to simplify the
v850 build code even if it doesn't (yet) respect any other trace options.
Bruno Larsen [Wed, 20 Apr 2022 17:41:11 +0000 (14:41 -0300)]
gdb: Fix issue with Clang CLI macros
Clang up to version 15 (current) adds macros that were defined in the
command line or by "other means", according to the Dwarf specification,
after the last DW_MACRO_end_file, instead of before the first
DW_MACRO_start_file, as the specification dictates. When GDB reads the
macros after the last file is closed, the macros never end up "in scope"
and so we can't print them. This has been submitted as a bug to Clang
developers (https://github.com/llvm/llvm-project/issues/54506), and PR
macros/29034 was opened for GDB to keep track of this.
Seeing as there is no expected date for it to be fixed, add a workaround
for all current versions of Clang. The workaround detects when
the main file would be closed and if the producer is Clang, and turns
that operation into a noop, so we keep a reference to the current_file
as those macros are read.
A test case was added to confirm the functionality, and the KFAIL for
running gdb.base/macro-source-path when using clang.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29034 Approved-By: Simon Marchi <simon.marchi@efficios.com>
Nick Clifton [Thu, 3 Nov 2022 09:20:37 +0000 (09:20 +0000)]
AVR Linker: Allow the start of the data region to be specified on the linker command line. [Fix PR number in ChangeLog entry]
PR 29741
* scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value
has not been provided on the command line then use DATA_ORIGIN.
(MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region.
Nick Clifton [Thu, 3 Nov 2022 09:17:41 +0000 (09:17 +0000)]
AVR Linker: Allow the start of the data region to specified on the command line.
PR 29471
* scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value
has not been provided on the command line then use DATA_ORIGIN.
(MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region.
Mike Frysinger [Mon, 31 Oct 2022 12:50:52 +0000 (18:35 +0545)]
sim: move common flags to default AM_CPPFLAGS
Since all host files we compile use these settings, move them out of
libcommon.a and into the default AM_CPPFLAGS. This has the effect of
dropping the custom per-target automake rules. Currently it saves us
~150 lines, but since it's about ~8 lines per object, the overhead
will increase quite a bit as we merge more files into a single build.
This also changes the object output names, so we have to tweak the
rules that were pulling in the common objects when linking.
Mike Frysinger [Mon, 31 Oct 2022 12:31:14 +0000 (18:16 +0545)]
sim: common: remove unused include paths
A bunch of these paths don't include any headers, and most likely
never will, so there's no real need to keep them. This will let
us harmonize paths with the top-level Makefile more easily, which
will in turn make it easier to move more compile steps there.
Christophe Lyon [Wed, 2 Nov 2022 16:50:15 +0000 (16:50 +0000)]
arm: PR 29739 Fix typo where ';' should not have been replaced with '@'
';' does not always indicate the start of a comment, and commit 8cb6e17571f3fb66ccd4fa19f881602542cd06fc incorrectly replaced 3
instances of ';' with '@' in expected diagnostics, leading to tests
failures.
This patch restores the original ';' as needed in these testcases.
Mike Frysinger [Mon, 31 Oct 2022 07:35:13 +0000 (13:20 +0545)]
sim: split CPPFLAGS between build & host
In order to merge more common/ files into the top-level, we need to
add more host flags to CPPFLAGS, and that conflicts with our current
use with build-time tools. So split them apart like we do with all
other build flags to avoid the issue.
Mike Frysinger [Mon, 31 Oct 2022 15:58:10 +0000 (21:43 +0545)]
sim: common: change sim_{fetch,store}_register helpers to use void* buffers
When reading/writing arbitrary data to the system's memory, the unsigned
char pointer type doesn't make that much sense. Switch it to void so we
align a bit with standard C library read/write functions, and to avoid
having to sprinkle casts everywhere.
Absent _UNICODE being defined (which gdb's Makefile doesn't do),
windows.h will always define STARTUPINFO is as STARTUPINFOA, so this
cast isn't correct when create_process expects a STARTUPINFOW
parameter (i.e. in a Cygwin build).
Instead write this as &info_ex.StartupInfo (which is always of the
correct type).
Jan Beulich [Wed, 2 Nov 2022 07:21:04 +0000 (08:21 +0100)]
x86: drop bogus Tbyte
Prior to commit 1cb0ab18ad24 ("x86/Intel: restrict suffix derivation")
the Tbyte modifier on the FLDT and FSTPT templates was pointless, as
No_ldSuf would have prevented it being accepted. Due to the special
nature of LONG_DOUBLE_MNEM_SUFFIX said commit, however, has led to these
insns being accepted in Intel syntax mode even when "tbyte ptr" was
present. Restore original behavior by dropping Tbyte there. (Note that
these insns in principle should by marked AT&T syntax only, but since
they haven't been so far we probably shouldn't change that.)
Jan Beulich [Wed, 2 Nov 2022 07:18:24 +0000 (08:18 +0100)]
x86: simplify expressions in update_imm()
Comparing the sum of the relevant .imm<N> fields against a constant imo
makes more obvious what is actually meant. It allows dropping of two
static variables, with a 3rd drop requiring two more minor adjustments
elsewhere, utilizing that "i" is zeroed first thing in md_assemble().
This also increases the chances of the compiler doing the calculations
all in registers.
Assembler adds $d for the odd .byte, and then adds $x+arch for the
alignment. Since norelax, riscv_add_odd_padding_symbol will add the
$d and $x for the odd alignment, but accidently remove the $x+arch because
it has the same address as $d. Therefore, we will get the unexpected result
before applying this patch,
gas/
* config/tc-riscv.c (make_mapping_symbol): If we are adding mapping symbol
for odd alignment, then we probably will remove the $x+arch by accidently
when it has the same address of $d. Try to add the removed $x+arch back
after the $d rather than just $x.
(riscv_mapping_state): Updated since parameters of make_mapping_symbol are
changed.
(riscv_add_odd_padding_symbol): Likewise.
(riscv_remove_mapping_symbol): Removed and moved the code into the
riscv_check_mapping_symbols.
(riscv_check_mapping_symbols): Updated.
* testsuite/gas/riscv/mapping-dis.d: Updated and added new testcase.
* testsuite/gas/riscv/mapping-symbols.d: Likewise.
* testsuite/gas/riscv/mapping.s: Likewise.
projects / thirdparty / binutils-gdb.git / log
