src/readahead/readahead-common.c:55:17: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 7 has type ‘__off64_t’ [-Wformat=]
log_debug("Not preloading file %s with size out of bounds %zu", fn, st->st_size);
^
Michael Marineau [Fri, 20 Jun 2014 20:46:04 +0000 (13:46 -0700)]
build-sys: require elfutils >= 158
The recently added stacktrace support in 8d4e028f uses functions added
in elfutils 158. Check for one of the new functions to avoid attempting
to build against older versions.
shifting from a non fixed number of bits >= to the size of the type
leads to weird results, handle the special case of << 32 to fix it.
This was causing a test failure from test-socket-util:
Assertion 'in_addr_prefix_intersect(f, &ua, apl, &ub, bpl) == result' failed at
/var/tmp/paludis/build/sys-apps-systemd-scm/work/systemd-scm/src/test/test-socket-util.c:147, function
test_in_addr_prefix_intersect_one(). Aborting.
Tom Gundersen [Sat, 21 Jun 2014 13:26:41 +0000 (15:26 +0200)]
sd-dhcp-server: change default lease time form 1m to 1h
The short lease was useful for testing, but in real-world usage it is pointless to keep leases
this short. That said, the cost of lease renewal is really low, so we keep the lease still
relatively short at one hour to not get into hard-to-hit problems with lease exhaustion etc.
We used to check if e.g. IFLA_BOND_MAX is defined and provide fallback
values in missing.h is it wasn't. But over time, various kernel
versions added IFLA_* defines, so checking for IFLA_BOND_MAX is not
enough if the kernel is new enough to have some of them but too old to
have all. In case we detect that the latest known enum value is
missing, #define most of them.
build-sys: check that python is enabled for "make dist"
Running "make dist" requires Python support since some of the man page sources
(such as man/systemd.index.xml and man/systemd.directives.xml) are generated by
Python scripts, so break "make dist" and give an useful error message when
Python or the Python lxml module is not available.
Tested:
$ ./configure --without-python && make && make dist
*** python and python-lxml module must be installed and enabled in order to make dist
make: *** [dist-check-python] Error 1
build-sys: do not include id128-constants.h in the dist archive
File src/python-systemd/id128-constants.h is auto generated and its generation
does not require special tools, only sed. There is no point in bundling it in
the distribution archive, so let's mark it as nodist_ to have it excluded.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80006
Tested: Successfully ran "make dist" after ./configure --without-python.
There's no need to save the old sigmask, if we are going to die. Let's
simplify this. Also, reset all the signal handlers, so that we don't
leave SIG_IGN set for some of them across reexec.
build-sys: add sysusers.d/systemd.conf to CLEANFILES
The sysusers.d/systemd.conf configuration file was originally introduced in
commit 1b99214789101, but it was not marked for cleanup. This caused distcheck
to complain about the file not being removed by distcleam.
Tested: Successfully ran "make distcheck" with this patchset.
Michael Marineau [Fri, 20 Jun 2014 02:07:04 +0000 (19:07 -0700)]
conf-files: include root in returned file paths
This restores the original root handling logic that was present prior to 112cfb18 when path expansion moved to path_strv_canonicalize_absolute.
That behavior partially went away in 12ed81d9.
Alternatively all users of conf_files_list* could be updated to
concatenate the paths themselves as unit_file_query_preset did but since
no user needs the un-concatenated form that is pointless duplication.
Since 12ed81d9 path_strv_canonicalize_absolute leaves the search list
relative to the given root directory instead of resolving paths to their
true location as the name implies. To better reflect this behavior
rename to the less strongly worded path_strv_resolve.
Otherwise the add_symlink() function tries to make directories for
each slash even for the slash after the @ symbol in the final link
name, failing for /dev/3270/tty1.
units/systemd-sysctl.service.in: run after load-modules
Modules might or will register new sysctl options.
[zj: This mechanism of adding modules just to reliably set sysctl
attributes is not ideal. Nevertheless, sysctl for dynamically created
attributes is simply broken, and this is the easiest workaround.]
tmpfiles: make sure "C" doesn't copy anything if the destination already exists
Previously it would recursively copy the entire tree in, and descend
into subdirectories even if the destination already exists. Let's do
what the documentation says and not do that.
If files down the tree shall be copied too, they should get their own
"C" lines.
main: don't show help text anymore when we detect an unknown kernel cmdline value starting with "systemd."
As generators and other components started to maintain their own kernel
command line options this help text needed more and more exceptions and
wasn't complete anyway. Fixing that would leak more information about
specific generators into PID 1, which we should avoid.
Given that kernel cmdline handling traditionally doesn't generate errors
or show help texts, let's just remove the logic for it for systemd too.
sd-dhcp6-client: Initialize fd to -1 and rename function
client_initialize name is misleading, since the function is actually
useful at the *end*, to reinitialize the object. But reset is shorter,
so rename it to client_reset.
Patrik Flykt [Thu, 19 Jun 2014 12:39:58 +0000 (15:39 +0300)]
sd-dhcp6-client: Add reply sending for test
Enhance the test case by generating a Reply. With a properly formed
Reply the callback function will be called and the additional
earlier event loop exit can now be removed.
Patrik Flykt [Thu, 19 Jun 2014 12:39:54 +0000 (15:39 +0300)]
sd-dhcp6-client: Add Advertise sending for test case
Enhance the test case by replying with an Advertise message to the
client. Copy the transaction id, IAID and DUID from the Solicit
message. Verify the Request message created by the DHCPv6 client
implementation and move the main loop exit to the end of the Request
message verification.
Patrik Flykt [Thu, 19 Jun 2014 12:39:53 +0000 (15:39 +0300)]
sd-dhcp6-client: Add Request message sending
As described in RFC 3315, Section 17.1.2, a client has to wait until the
first timeout has elapsed before it is allowed to request IPv6 addresses
from the DHCPv6 server. This is indicated by a non-NULL lease and a
non-zero resend count. Should the Advertisement contain a preference
value of 255 or be received after the first timeout, IPv6 address
requesting is started immediately.
In response to these events, create a Request message and set up proper
resend timers to send the message to the server.
Patrik Flykt [Thu, 19 Jun 2014 12:39:49 +0000 (15:39 +0300)]
sd-dhcp6-client: Update start function to take a state
Update the start function so that the client state can be conveniently
changed with the previous message resend timers cleared. On initial
startup also create and bind to the UDP socket.
Patrik Flykt [Thu, 19 Jun 2014 12:39:46 +0000 (15:39 +0300)]
sd-dhcp6-client: Add test case for Advertise message parsing
Add a basic test case excersising once more option parsing function
in addition to lease handling. Check that the address iteration
functions return the correct IPv6 address and lifetimes and that
only one address is returned. Also verify that the server ID and
preference values are read correctly.
Patrik Flykt [Thu, 19 Jun 2014 12:39:42 +0000 (15:39 +0300)]
sd-dhcp6-client: Receive and parse Advertise messages
When receiving DHCPv6 messages, discard the ones that are not meant
for DHCPv6 clients and verify the transaction id. Once that is done,
process the Advertise message and select the Advertise with the
highest preference.
Create a separate function for lease information parsing so that it
can be reused in other parts of the protocol. Verify both DUID and
IAID in the received message and store other necessary information
with the lease structure.
Patrik Flykt [Thu, 19 Jun 2014 12:39:39 +0000 (15:39 +0300)]
sd-dhcp6-client: Add IA Address option parsing
Add functionality to parse DHCPv6 Identity Association for
Non-temporary (IA_NA) and Temporary Addresses (IA_TA) options.
Both of them contain one or more IA Address (IAADDR) options
and optinally a status code option. Only the IA_NA option
contains lease lifetimes. See RFC 3315, sections 22.4., 22.5.,
22.6., 22.13. and appendix B. for details. If the lease
timeouts are not set, use the ones recommended for servers in
section 22.4.
Factor out common code in the form of an option header parsing
helper function.
Patrik Flykt [Thu, 19 Jun 2014 12:39:35 +0000 (15:39 +0300)]
sd-dhcp6-lease: Add DHCPv6 lease handling
Create a structure describing a DHCPv6 lease. Add internal functions
for creating a new lease and accessing the server ID, preference and
IAID. Provide functions for clearing addresses and associated timers.
External users are initially given only the capabilities of
referencing and unreferencing the lease structure.
Patrik Flykt [Thu, 19 Jun 2014 12:39:30 +0000 (15:39 +0300)]
sd-dhcp6-client: Add DHCPv6 Solicit test case
Verify the Solicit message created by the DHCPv6 client code.
Provide local variants for detect_vm(), detect_container() and
detect_virtualization() defined in virt.h. This makes the DHCPv6
library believe it is run in a container and does not try to request
interface information from udev for the non-existing interface index
used by the test case code.
Patrik Flykt [Thu, 19 Jun 2014 12:39:27 +0000 (15:39 +0300)]
sd-dhcp6-client: Add DHCPv6 Solicit message creation and sending
Implement the initial functionality used for creating a DHCPv6 Solicit
message containing the needed options and send it to the DHCPv6
broadcast address. Increase the sent message count and ensure that
the Solicit Initial Retransmission Time is strictly greater than
the Solicitation IRT as described in RFC 3315, section 17.1.2.
projects / thirdparty / systemd.git / log
