Jakub Jelinek [Sun, 26 Jan 2020 11:12:36 +0000 (12:12 +0100)]
i386: Fix up *{add,sub}v<dwi>4_doubleword patterns (PR target/93412)
In the *{add,sub}v<dwi>4_doubleword patterns, we don't really want to see a
VOIDmode last operand, because it then means invalid RTL
(sign_extend:{TI,POI} (const_int ...)) or so, and therefore something we
don't really handle in the splitter either. We have
*{add,sub}v<dwi>4_doubleword_1 pattern for those and that is what combine
will match, the problem in this testcase is just that it was only RA that
propagated the constant into the instruction.
In the similar *{add,sub}v<mode>4 patterns, we make sure not to accept
VOIDmode operand and similarly to these have _1 suffixed variant that allows
constants.
2020-01-26 Jakub Jelinek <jakub@redhat.com>
PR target/93412
* config/i386/i386.md (*addv<dwi>4_doubleword, *subv<dwi>4_doubleword):
Use nonimmediate_operand instead of x86_64_hilo_general_operand and
drop <di> from constraint of last operand.
Jakub Jelinek [Sun, 26 Jan 2020 11:10:48 +0000 (12:10 +0100)]
i386: Fix up *avx_vperm_broadcast_v4df [PR93430]
Apparently my recent patch which moved the *avx_vperm_broadcast* and
*vpermil* patterns before vpermpd broke the following testcase, the
define_insn_and_split matched always but the splitter condition only split
it if not -mavx2 for V4DFmode, basically relying on the vpermpd pattern to
come first.
The following patch fixes it by moving that part of SPLIT-CONDITION into
CONDITION, so that when it is not met, we just don't match the pattern
and thus match the later vpermpd pattern in that case.
Except, for { 0, 0, 0, 0 } permutation, there is actually no reason to do
that, vbroadcastsd from memory seems to be slightly cheaper than vpermpd $0.
2020-01-26 Jakub Jelinek <jakub@redhat.com>
PR target/93430
* config/i386/sse.md (*avx_vperm_broadcast_<mode>): Disallow for
TARGET_AVX2 and V4DFmode not in the split condition, but in the
pattern condition, though allow { 0, 0, 0, 0 } broadcast always.
* gcc.dg/pr93430.c: New test.
* gcc.target/i386/avx2-pr93430.c: New test.
Jakub Jelinek [Sat, 25 Jan 2020 23:32:01 +0000 (00:32 +0100)]
testsuite: Fix up pr92788.C FAIL on ia32.
2020-01-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/92788
* g++.dg/pr92788.C: Move to ...
* g++.target/i386/pr92788.C: ... here. Remove target from dg-do line.
Change type of operator new's first parameter to __SIZE_TYPE__.
Marek Polacek [Fri, 24 Jan 2020 23:08:58 +0000 (18:08 -0500)]
c++: Poor diagnostic for dynamic_cast in constexpr context [PR93414]
I neglected to add a proper diagnostic for the reference dynamic_cast
case when the operand of a dynamic_cast doesn't refer to a public base
of Derived, resulting in suboptimal error message
error: call to non-'constexpr' function 'void* __cxa_bad_cast()'
2020-01-25 Marek Polacek <polacek@redhat.com>
PR c++/93414 - poor diagnostic for dynamic_cast in constexpr context.
* constexpr.c (cxx_eval_dynamic_cast_fn): Add a reference
dynamic_cast diagnostic.
Andrew Pinski [Sat, 25 Jan 2020 05:20:38 +0000 (05:20 +0000)]
Fix gcc.target/aarch64/vec_zeroextend.c for big-endian
vec_zeroextend.c fails on big-endian as it assumes
0 index is the lower part but it is not for
big-endian case. This fixes the problem by
using the correct index for the lower part
for big-endian.
Committed as obvious after a test on aarch64_be-linux-gnu.
ChangeLog:
* gcc.target/aarch64/vec_zeroextend.c: Fix for big-endian.
Jason Merrill [Fri, 24 Jan 2020 19:58:56 +0000 (14:58 -0500)]
c++: Fix ICE with constrained friend (PR93400).
Here, the problem was that tsubst_friend_function was modifying the
CONSTRAINT_INFO for the friend template to have the constraints for one
instantiation, which fell down when we went to adjust it for another
instantiation. Fixed by deferring substitution of trailing requirements
until we try to check declaration matching.
PR c++/93400 - ICE with constrained friend.
* constraint.cc (maybe_substitute_reqs_for): New.
* decl.c (function_requirements_equivalent_p): Call it.
* pt.c (tsubst_friend_function): Only substitute
TEMPLATE_PARMS_CONSTRAINTS.
(tsubst_template_parms): Copy constraints.
Jason Merrill [Fri, 24 Jan 2020 23:20:56 +0000 (18:20 -0500)]
c++: Fix ICE with lambda in member operator (PR93279)
Here the problem was that we were remembering the lookup in template scope,
and then trying to reuse that lookup in the instantiation without
substituting into it at all. The simplest solution is to not try to
remember a lookup that finds a class-scope declaration, as in that case
doing the normal lookup again at instantiation time will always find the
right declarations.
PR c++/93279 - ICE with lambda in member operator.
* name-lookup.c (maybe_save_operator_binding): Don't remember
class-scope bindings.
Jason Merrill [Thu, 23 Jan 2020 21:59:54 +0000 (16:59 -0500)]
c++: Fix parameter map handling of member typedef.
any_template_parm_r was looking at the args of an alias template-id, but we
need to look at all args of a member alias/typedef, including implicit ones
from the enclosing class.
PR c++/93377 - ICE with member alias in constraint.
* pt.c (any_template_parm_r): Look at template arguments for all
aliases, not only alias templates.
Jakub Jelinek [Fri, 24 Jan 2020 21:49:51 +0000 (22:49 +0100)]
i386: prefer vpermilpd over vpermpd [PR93395]
In Agner Fog's tables, vpermilp[sd] with immediates seem to be
much faster than vpermpd with immediate, for a good reason,
the former only permute something within the lanes and don't do anything
intra-lane, while vpermpd can. So, functionality-wise, vpermilpd
is more efficient subset of vpermpd. We use the same RTL for those
though (and also for certain broadcast).
Now, the problem was that the vpermpd pattern appeared first in sse.md,
followed by the broadcast patterns, followed by the vpermilp[sd].
Which means unless -mavx -mno-avx2, we'd emit vpermpd instead of the
more efficient alternatives.
The following patch reorders them, so that vpermpd comes last, if we
can match a broadcast, we do, if we can match a vpermilp[sd] that is not a
broadcast, we will, otherwise fall back (of course only if -mavx2) to
vpermpd.
Andrew Pinski [Sat, 11 Jan 2020 20:34:24 +0000 (20:34 +0000)]
Decrease cortexa57_extra_costs's alu.shift_reg
Like I mentioned in https://gcc.gnu.org/ml/gcc/2020-01/msg00157.html,
The shift by a register should be just COSTS_N_INSNS (1) rather than
COSTS_N_INSNS (2). This allows lshift_cheap_p to return true now
and converting switches to be using shift and other like
structures. I noticed this difference when I was working
through PR 93131 and understanding what reassoc could handle.
ChangeLog:
* config/arm/aarch-cost-tables.h (cortexa57_extra_costs): Change
alu.shift_reg to 0.
Marek Polacek [Fri, 17 Jan 2020 20:17:42 +0000 (15:17 -0500)]
c++: Fix ICE in tsubst_copy with parenthesized expression [PR93299]
Since e4511ca2e9ecdb51d41b64452398f8e2df575668 force_paren_expr can create
a VIEW_CONVERT_EXPR so that we have something to set REF_PARENTHESIZED_P
on, while not making the expression dependent. But tsubst_copy can't cope
with such a VIEW_CONVERT_EXPR, because it's not location_wrapper_p, or
a TEMPLATE_PARM_INDEX wrapped in a VIEW_CONVERT_EXPR.
I think we need to teach tsubst_copy how to handle it. Setting
EXPR_LOCATION_WRAPPER_P in force_paren_expr would make the ICE go away
too, but tsubst_copy would lose the REF_PARENTHESIZED_P flag.
2020-01-24 Marek Polacek <polacek@redhat.com>
PR c++/93299 - ICE in tsubst_copy with parenthesized expression.
* pt.c (tsubst_copy): Handle a REF_PARENTHESIZED_P VIEW_CONVERT_EXPR.
Jonathan Wakely [Fri, 24 Jan 2020 17:07:01 +0000 (17:07 +0000)]
libstdc++: Simplify construction of comparison category types
The _Eq and _Ord enumerations can be combined into one, reducing the
number of constructors needed for the comparison category types. The
redundant equal enumerator can be removed and equivalent used in its
place. The _Less and _Greater enumerators can be renamed because 'less'
and 'greater' are already reserved names anyway.
* libsupc++/compare (__cmp_cat::_Eq): Remove enumeration type.
(__cmp_cat::_Ord::equivalent): Add enumerator.
(__cmp_cat::_Ord::_Less, __cmp_cat::_Ord::_Greater): Rename to less
and greater.
(partial_ordering, weak_ordering, strong_ordering): Remove
constructors taking __cmp_cat::_Eq parameters. Use renamed
enumerators.
Jeff Law [Fri, 24 Jan 2020 15:57:46 +0000 (08:57 -0700)]
Emit reasonable diagnostic rather than ICE on invalid ASM on H8 port
PR target/13721
* config/h8300/h8300.c (h8300_print_operand): Only call byte_reg
for REGs. Call output_operand_lossage to get more reasonable
diagnostics.
PR target/13721
* gcc.target/h8300/pr13721.c: New test.
Andrew Stubbs [Fri, 24 Jan 2020 14:31:28 +0000 (14:31 +0000)]
Fix ICE on unsupported FP comparison
2020-01-24 Andrew Stubbs <ams@codesourcery.com>
gcc/
* config/gcn/gcn-valu.md (vec_cmp<mode>di): Use
gcn_fp_compare_operator.
(vec_cmpu<mode>di): Use gcn_compare_operator.
(vec_cmp<u>v64qidi): Use gcn_compare_operator.
(vec_cmp<mode>di_exec): Use gcn_fp_compare_operator.
(vec_cmpu<mode>di_exec): Use gcn_compare_operator.
(vec_cmp<u>v64qidi_exec): Use gcn_compare_operator.
(vec_cmp<mode>di_dup): Use gcn_fp_compare_operator.
(vec_cmp<mode>di_dup_exec): Use gcn_fp_compare_operator.
(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>): Use
gcn_fp_compare_operator.
(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>_exec): Use
gcn_fp_compare_operator.
(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>): Use
gcn_fp_compare_operator.
(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>_exec): Use
gcn_fp_compare_operator.
Richard Earnshaw [Fri, 24 Jan 2020 14:38:16 +0000 (14:38 +0000)]
contrib: Change 'remote' for personal branches and add branch creation script
Whilst trying to convert the add vendor branch script to work with
personal branches I encountered a minor issue where git would report
ambiguous refs when checking out the new branch.
It turns out that this is because git considers <me>/<topic> to be
ambiguous if both
refs/heads/<me>/<topic>
and
refs/remotes/<me>/<topic>
exist in the list of known branches.
Having thought about this a bit, I think the best solution is to adopt
something more like the vendors space and call the remote users/<me>
(this also works better if you want to set up remotes to track other
users branches as well).
So this patch has two parts.
1) It updates gcc-git-customization.sh to set up the new 'remote' and
converts any existing remote and branches tracking that to the new
format
2) It adds a new script to set up a personal branch on the gcc git repository.
* gcc-git-customization.sh: Use users/<pfx> for the personal remote
rather than just <pfx>. Convert any existing personal branches to the
new remote.
* git-add-user-branch.sh: New file.
Nathan Sidwell [Fri, 24 Jan 2020 12:19:36 +0000 (04:19 -0800)]
Remove bogus __has_include controlling macro
I noticed, but ignored this code when addressing p80005, but having
fixed up defined(X) on the modules branch, I could see where it came
from, and it's obviously wrong as we've just pulled out a string
contant from the token.
Provide means, in the form of a `--with-toolexeclibdir=' configuration
option, to override the default installation directory for target
libraries, otherwise known as $toolexeclibdir. This is so that it is
possible to get newly-built libraries, particularly the shared ones,
installed in a common place, so that they can be readily used by the
target system as their host libraries, possibly over NFS, without a need
to manually copy them over from the currently hardcoded location they
would otherwise be installed in.
In the presence of the `--enable-version-specific-runtime-libs' option
and for configurations building native GCC the option is ignored.
Frederik Harwath [Mon, 20 Jan 2020 13:07:03 +0000 (14:07 +0100)]
Fix expectation and types in acc_get_property tests
* Weaken expectation concerning acc_property_free_memory.
Do not expect the value returned by CUDA since that value might have
changed in the meantime.
* Use correct type for the results of calls to acc_get_property in tests.
libgomp/
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-aux.c
(expect_device_properties): Remove "expected_free_mem" argument,
change "expected_total_mem" argument type to size_t;
change types of acc_get_property results to size_t,
adapt format strings.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property.c:
Use %zu instead of %zd to print size_t values.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-2.c: Adapt and
rename to ...
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-nvptx.c: ... this.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-3.c: Adapt and
rename to ...
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-host.c: ... this.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
David Malcolm [Thu, 23 Jan 2020 22:46:12 +0000 (17:46 -0500)]
analyzer: avoid relying on system <assert.h> in testsuite (PR 93367)
PR analyzer/93367 reports a testsuite failure in abort.c on
hppa64-hp-hpux11.11 when detecting if the analyzer "knows" that the
condition holds after the assert.
The root cause is that the assertion failure function in that
configuration's <assert.h> is not marked with
__attribute__ ((__noreturn__)).
This patch reworks the test to avoid <assert.h> in favor of a custom
implementation of assert, so that the test demonstrates the idea without
relying on properties of <assert.h>.
gcc/testsuite/ChangeLog:
PR analyzer/93367
* gcc.dg/analyzer/abort.c: Remove include of <assert.h>.
Replace use of assert with a custom assertion implementation.
Jakub Jelinek [Thu, 23 Jan 2020 21:50:40 +0000 (22:50 +0100)]
testsuite: Require lp64 target rather x86_64-*-* in pr93027.c. [PR93027]
I've noticed this test failed on x86_64-linux with -m32 or -mx32 testing,
the triplet doesn't really say which actual multilib it is, and the test
really works with lp64.
2020-01-23 Jakub Jelinek <jakub@redhat.com>
PR inline-asm/93027
* gcc.target/i386/pr93027.c: Require lp64 target rather x86_64-*-*.
Jakub Jelinek [Thu, 23 Jan 2020 19:08:22 +0000 (20:08 +0100)]
postreload: Fix up postreload combine [PR93402]
The following testcase is miscompiled, because the postreload pass changes:
-(insn 14 13 23 2 (parallel [
- (set (reg:DI 1 dx [94])
- (plus:DI (reg:DI 1 dx [95])
- (reg:DI 5 di [92])))
- (clobber (reg:CC 17 flags))
- ]) "pr93402.c":8:30 186 {*adddi_1}
- (expr_list:REG_EQUAL (plus:DI (reg:DI 5 di [92])
- (const_int 111111111111 [0x19debd01c7]))
- (nil)))
-(insn 23 14 25 2 (set (reg:SI 0 ax)
+(insn 23 13 25 2 (set (reg:SI 0 ax)
(const_int 0 [0])) "pr93402.c":10:1 67 {*movsi_internal}
(nil))
(insn 25 23 26 2 (use (reg:SI 0 ax)) "pr93402.c":10:1 -1
(nil))
-(insn 26 25 35 2 (use (reg:DI 1 dx)) "pr93402.c":10:1 -1
+(insn 26 25 35 2 (use (plus:DI (reg:DI 1 dx [95])
+ (reg:DI 5 di [92]))) "pr93402.c":10:1 -1
(nil))
A USE insn is not a normal insn and verify_changes called from
apply_change_group is happy about any changes into it.
The following patch avoids this optimization if we were to change
the USE operand (this routine only changes a reg into (plus reg reg2)).
2020-01-23 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/93402
* postreload.c (reload_combine_recognize_pattern): Don't try to adjust
USE insns.
Jason Merrill [Thu, 23 Jan 2020 17:43:15 +0000 (12:43 -0500)]
c++: Avoid ICE when constant evaluation of __builtin_strchr fails.
If we can't change the argument to &"...", use the original arg instead of
the partially munged one.
PR c++/93331 - ICE with __builtin_strchr.
* constexpr.c (cxx_eval_builtin_function_call): Use the original
argument if we didn't manage to extract a STRING_CST.
Jason Merrill [Thu, 23 Jan 2020 17:32:02 +0000 (12:32 -0500)]
c++: Fix ICE with defaulted destructor and template.
In a template we don't instantiate a deferred noexcept-spec, and we don't
need it because we aren't going to do anything with the value of
throwing_cleanup in a template anyway.
PR c++/93345 - ICE with defaulted dtor and template.
PR c++/33799
* decl.c (cxx_maybe_build_cleanup): Don't try to set
throwing_cleanup in a template.
David Malcolm [Wed, 22 Jan 2020 21:26:38 +0000 (16:26 -0500)]
analyzer: avoid ICE with missing arguments (PR 93375)
PR analyzer/93375 reports an ICE under certain circumstances
involving a call where the number of arguments at the callsite
is less than the parameter count of the callee,
Specifically, the ICE occurs when pruning a checker_path for a
diagnostic, when attempting to maintain which expression is of
interest through such a call.
The root cause is an assumption that there were enough arguments at
the callsite, within callgraph_superedge's methods for mapping
expressions between callee and caller.
This patch adds checks for this to the relevant methods, fixing the ICE.
gcc/analyzer/ChangeLog:
PR analyzer/93375
* supergraph.cc (callgraph_superedge::get_arg_for_parm): Fail
gracefully is the number of parameters at the callee exceeds the
number of arguments at the call stmt.
(callgraph_superedge::get_parm_for_arg): Likewise.
gcc/testsuite/ChangeLog:
PR analyzer/93375
* gcc.dg/analyzer/pr93375.c: New test.
Jason Merrill [Thu, 23 Jan 2020 15:37:18 +0000 (10:37 -0500)]
c-family: One more 40752 tweak for unsigned char.
My last patch didn't fix all the failures on unsignd char targets. We were
missing one warning because by suppressing -Wsign-conversion for the second
operand of + we missed an overflow that we want to warn about, and we
properly don't warn about unsigned / or %.
PR testsuite/93391 - PR 40752 test fails with unsigned plain char.
* c-warn.c (conversion_warning): Change -Wsign-conversion handling.
* lib/target-supports.exp (check_effective_target_unsigned_char):
New.
* config.in: Regenerated.
* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
for TARGET_LIBC_GNUSTACK.
* configure: Regenerated.
* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
found to be 2.31 or greater.
* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to
TARGET_SOFT_FLOAT.
* config/mips/mips.c (TARGET_ASM_FILE_END): Define to ...
(mips_asm_file_end): New function. Delegate to
file_end_indicate_exec_stack if NEED_INDICATE_EXEC_STACK is true.
* config/mips/mips.h (NEED_INDICATE_EXEC_STACK): Define to 0.
Jakub Jelinek [Thu, 23 Jan 2020 15:17:56 +0000 (16:17 +0100)]
i386: Fix ICEs on TImode signed overflow add/sub patterns [PR93376]
The following testcase ICEs, because during try_combine of i3:
(insn 18 17 19 2 (parallel [
(set (reg:CCO 17 flags)
(eq:CCO (plus:OI (sign_extend:OI (reg:TI 96))
(const_int 1 [0x1]))
(sign_extend:OI (plus:TI (reg:TI 96)
(const_int 1 [0x1])))))
(set (reg:TI 98)
(plus:TI (reg:TI 96)
(const_int 1 [0x1])))
]) "pr93376.c":8:10 223 {*addvti4_doubleword_1}
(expr_list:REG_UNUSED (reg:TI 98)
(expr_list:REG_DEAD (reg:TI 96)
(nil))))
and i2:
(insn 17 37 18 2 (set (reg:TI 96)
(const_wide_int 0x7fffffffffffffffffffffffffffffff)) "pr93376.c":8:10 65 {*movti_internal}
(nil))
the eq in there gets simplified into:
(eq:CCO (const_wide_int 0x080000000000000000000000000000000)
(const_wide_int 0x80000000000000000000000000000000))
and simplify-rtx.c tries to simplify it by simplifying MINUS
of the two operands.
Now, i386 defines MAX_BITSIZE_MODE_ANY_INT to 128, because OImode
and XImode are used mainly as a placeholder for the vector modes;
these new signed overflow patterns are an exception to that,
but what they really need is just TImode precision + 1 (maybe 2 worst case)
bits at any time.
wide-int.h defines WIDE_INT_MAX_ELTS in a way that it contains one more
HWI above number of HWIs to cover WIDE_INT_MAX_ELTS, so on i386 that is
3 HWIs, meaning that TImode precision + 1/2 bits is still representable in
there. Unfortunately, the way wi::sub_large is implemented, it needs
not just those 3 HWIs, but one HWI above the maximum of the lengths of
both operands, which means it buffer overflows, overwrites the following
precision in wide_int_storage and ICEs later on. The need for 4 HWIs is
only temporary, because canonize immediately after it canonicalizes it
back to 3 HWIs only.
The patch is something suggested by Richard S., avoid using OImode
for this and instead use a partial int mode that is smaller.
2020-01-23 Jakub Jelinek <jakub@redhat.com>
PR target/93376
* config/i386/i386-modes.def (POImode): New mode.
(MAX_BITSIZE_MODE_ANY_INT): Change from 128 to 160.
* config/i386/i386.md (DPWI): New mode attribute.
(addv<mode>4, subv<mode>4): Use <DPWI> instead of <DWI>.
(QWI): Rename to...
(QPWI): ... this. Use POI instead of OI for TImode.
(*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1,
*subv<dwi>4_doubleword, *subv<dwi>4_doubleword_1): Use <QPWI>
instead of <QWI>.
Jonathan Wakely [Thu, 23 Jan 2020 14:02:32 +0000 (14:02 +0000)]
libstdc++: Simplify makefile rule for largefile-config.h (PR91947)
The previous rule could leave an incomplete file if the build was
interrupted, which would then not be remade if make was run again.
This makes the rule more robust by writing to a temporary file and only
moving it into place as the final step. It also simplifies the rule so
that only the essential macro definitions are written to the file, not
the explanatory comments and commented out #undef lines.
Also, the macro for enabling LFS on Mac OS X 10.5 is now set
unconditionally, which is a bug fix from upstream autoconf.
aarch64: Fix -mtrack-speculation for irreversible conditions [PR93341]
We can't yet represent the inverse of all conditions in rtl
(see g:865257c447cc50f5819e), triggering an ICE in the pass
that handles -mtrack-speculation. Since we don't expect these
insns to be optimised in any way, the easiest fix seemed to be
to add an insn that reverses the condition internally.
2020-01-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR target/93341
* config/aarch64/aarch64.md (UNSPEC_SPECULATION_TRACKER_REV): New
unspec.
(speculation_tracker_rev): New pattern.
* config/aarch64/aarch64-speculation.cc (aarch64_do_track_speculation):
Use speculation_tracker_rev to track the inverse condition.
gcc/testsuite/
PR target/93341
* gcc.target/aarch64/pr93341.c: New test.
David Malcolm [Tue, 19 Nov 2019 19:11:21 +0000 (14:11 -0500)]
analyzer: introduce analyzer-torture.exp
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/data-model-3.c: Remove hardcoded "-O2" and move
to torture/conftest-1.c.
* gcc.dg/analyzer/torture/analyzer-torture.exp: New.
* gcc.dg/analyzer/torture/conftest-1.c: Move here from
analyzer/data-model-3.c.
* gcc.dg/analyzer/torture/poc.c: New test.
Richard Biener [Thu, 23 Jan 2020 11:43:26 +0000 (12:43 +0100)]
tree-optimization/93354 FRE redundant store removal validity fix
This fixes tracking of the alias-set of partial defs for use by
redundant store removal.
2020-01-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/93381
* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Take
alias-set of the def as argument and record the first one.
(vn_walk_cb_data::first_set): New member.
(vn_reference_lookup_3): Pass the alias-set of the current def
to push_partial_def. Fix alias-set used in the aggregate copy
case.
(vn_reference_lookup): Consistently set *last_vuse_ptr.
* real.c (clear_significand_below): Fix out-of-bound access.
Jakub Jelinek [Thu, 23 Jan 2020 11:39:13 +0000 (12:39 +0100)]
i386: Use bzhi for x & ((1 << y) - 1) or x & ((1U << y) - 1) [PR93346]
The bzhi patterns are quite complicated because they need to accurately
describe the behavior of the instruction for all input values.
The following patterns are simple and make bzhi recognizable even for
cases where not all input values are valid, because the user used
a shift, in which case the low 8 bit of the last operand need to be in
between 0 and precision-1.
2020-01-23 Jakub Jelinek <jakub@redhat.com>
PR target/93346
* config/i386/i386.md (*bmi2_bzhi_<mode>3_2, *bmi2_bzhi_<mode>3_3):
New define_insn patterns.
aarch64: Skip some SVE ACLE function-body tests for ILP32
The load, store, prefetch and alias-check test functions require
extra zero extends for ILP32, so they don't match the expected function
bodies. This patch therefore skips those parts of the tests for ILP32,
but keeps the compile/assemble parts.
2020-01-23 Richard Sandiford <richard.sandiford@arm.com>
testsuite: Add target/xfail argument to check-function-bodies
check-function-bodies allows individual function tests to be
annotated with target/xfail selectors, but sometimes it's
useful to have the same selector for all functions.
2020-01-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* doc/sourcebuild.texi (check-function-bodies): Add an
optional target/xfail selector.
gcc/testsuite/
* lib/scanasm.exp (check-function-bodies): Add an optional
target/xfail selector.
Ian Lance Taylor [Wed, 22 Jan 2020 23:52:23 +0000 (15:52 -0800)]
gotest: explicitly skip type descriptors
Type descriptors are normally weak and nm will report them as V,
so we will skip them when collecting the list of symbols.
But when not using GNU nm, they may be reported as D,
so also skip them in symstogo.
David Malcolm [Wed, 22 Jan 2020 14:37:18 +0000 (09:37 -0500)]
analyzer: fix ICE due to sm-state origin being purged (PR 93382)
The ICE in PR analyzer/93382 is a validation error.
The global variable "idx" acquires a "tainted" state from local array
n1[0]. When the frame is popped, the svalue for n1[0] is purged, but
the "taint" sm_state_map's entry for "idx" has a svalue_id referencing
the now-purged svalue. This is caught by program_state::validate as an
assertion failure.
This patch fixes the issue by resetting the origin id within
sm_state_map entries for the case where the origin id has been purged.
gcc/analyzer/ChangeLog:
PR analyzer/93382
* program-state.cc (sm_state_map::on_svalue_purge): If the
entry survives, but the origin is being purged, then reset the
origin to null.
gcc/testsuite/ChangeLog:
PR analyzer/93382
* gcc.dg/analyzer/pr93382.c: New test.
Andrew Pinski [Wed, 22 Jan 2020 23:34:34 +0000 (23:34 +0000)]
Fix patchable-function-entry on arc
The problem here is arc looks at current_output_insn unconditional
but sometimes current_output_insn is NULL. With patchable-function-entry,
it will be. This is similar to how the nios2, handles "%.".
Committed as obvious after a simple test with -fpatchable-function-entry=1.
ChangeLog:
* config/arc/arc.c (output_short_suffix): Check insn for nullness.
Andrew Pinski [Thu, 23 Jan 2020 00:40:19 +0000 (00:40 +0000)]
Revert "Allow tree-ssa.exp to be run by itself" and move some testcases
This reverts commit 9085381f1931cc3667412c8fff91878184835901 as it was
causing default dg-do to be set incorrectly on most targets.
Instead move testcases that are vect related testcase that
use "dg-require-effective-target vect_*" to the vect test area.
ChangeLog:
* gcc.dg/tree-ssa/pr88497-1.c: Move to ...
* gcc.dg/vect/pr88497-1.c: This.
* gcc.dg/tree-ssa/pr88497-2.c: Move to ...
* gcc.dg/vect/pr88497-2.c: This.
* gcc.dg/tree-ssa/pr88497-3.c: Move to ...
* gcc.dg/vect/pr88497-3.c: This.
* gcc.dg/tree-ssa/pr88497-4.c: Move to ...
* gcc.dg/vect/pr88497-4.c: This.
* gcc.dg/tree-ssa/pr88497-5.c: Move to ...
* gcc.dg/vect/pr88497-5.c: This.
* gcc.dg/tree-ssa/pr88497-6.c: Move to ...
* gcc.dg/vect/pr88497-6.c: This.
* gcc.dg/tree-ssa/pr88497-7.c: Move to ...
* gcc.dg/vect/pr88497-7.c: This.
Revert:
* tree-ssa.exp: Set DEFAULT_VECTCFLAGS and DEFAULT_VECTCFLAGS.
Call check_vect_support_and_set_flags also.
Jason Merrill [Wed, 22 Jan 2020 19:21:06 +0000 (14:21 -0500)]
c-family: Fix problems with blender and PPC from PR 40752 patch.
blender in SPEC is built with -funsigned-char, which is also the default on
PPC, and exposed -Wsign-conversion issues that weren't seen by the x86_64
testsuite. In blender we were complaining about operands to an expression
that we didn't't previously complain about as a whole. So only check
operands after we check the whole expression. Also, to fix the PR 40752
testcases on -funsigned-char targets, don't consider -Wsign-conversion for
the second operand of PLUS_EXPR, especially since fold changes
"x - 5" to "x + (-5)". And don't use SCHAR_MAX with plain char.
PR testsuite/93391 - PR 40752 test fails with unsigned plain char.
PR c++/40752
* c-warn.c (conversion_warning): Check operands only after checking
the whole expression. Don't check second operand of + for sign.
Andrew Pinski [Mon, 20 Jan 2020 22:10:32 +0000 (22:10 +0000)]
Allow tree-ssa.exp to be run by itself
tree-ssa testcases sometimes check autovect effective target
but does not set it up. On MIPS, those testcases fail with
some TCL error messages. This fixes the issue by calling
check_vect_support_and_set_flags inside tree-ssa.exp.
There might be other .exp files which need to be done this
way too but I have not checked all of them.
Tested on x86_64-linux-gnu and a cross to mips64-octeon-linux-gnu.
Both full run of the testsuite and running tree-ssa.exp by itself.
testsuite/ChangeLog:
* tree-ssa.exp: Set DEFAULT_VECTCFLAGS and DEFAULT_VECTCFLAGS.
Call check_vect_support_and_set_flags also.
David Malcolm [Wed, 22 Jan 2020 16:45:58 +0000 (11:45 -0500)]
analyzer: fix setjmp handling with -g (PR 93378)
PR analyzer/93378 reports an ICE at -O1 -g when analyzing a rewind via
longjmp to a setjmp call with.
The root cause is that the rewind_info_t::get_setjmp_call attempts to
locate the setjmp GIMPLE_CALL via within the exploded_node containing
it, but the exploded_node has two stmts: a GIMPLE_DEBUG, then the
GIMPLE_CALL, and so erroneously picks the GIMPLE_DEBUG, leading to
a failed as_a <const gcall *>.
This patch reworks how the analyzer stores information about a setjmp
so that instead of storing an exploded_node *, it instead introduces
a "setjmp_record" struct, for use by both setjmp_svalue and
rewind_info_t. Hence we store the information directly, rather than
attempting to reconstruct it, fixing the bug.
gcc/analyzer/ChangeLog:
PR analyzer/93378
* engine.cc (setjmp_svalue::compare_fields): Update for
replacement of m_enode with m_setjmp_record.
(setjmp_svalue::add_to_hash): Likewise.
(setjmp_svalue::get_index): Rename...
(setjmp_svalue::get_enode_index): ...to this.
(setjmp_svalue::print_details): Update for replacement of m_enode
with m_setjmp_record.
(exploded_node::on_longjmp): Likewise.
* exploded-graph.h (rewind_info_t::m_enode_origin): Replace...
(rewind_info_t::m_setjmp_record): ...with this.
(rewind_info_t::rewind_info_t): Update for replacement of m_enode
with m_setjmp_record.
(rewind_info_t::get_setjmp_point): Likewise.
(rewind_info_t::get_setjmp_call): Likewise.
* region-model.cc (region_model::dump_summary_of_map): Likewise.
(region_model::on_setjmp): Likewise.
* region-model.h (struct setjmp_record): New struct.
(setjmp_svalue::m_enode): Replace...
(setjmp_svalue::m_setjmp_record): ...with this.
(setjmp_svalue::setjmp_svalue): Update for replacement of m_enode
with m_setjmp_record.
(setjmp_svalue::clone): Likewise.
(setjmp_svalue::get_index): Rename...
(setjmp_svalue::get_enode_index): ...to this.
(setjmp_svalue::get_exploded_node): Replace...
(setjmp_svalue::get_setjmp_record): ...with this.
gcc/testsuite/ChangeLog:
PR analyzer/93378
* gcc.dg/analyzer/setjmp-pr93378.c: New test.
David Malcolm [Fri, 17 Jan 2020 14:50:33 +0000 (09:50 -0500)]
analyzer: introduce namespace to avoid ODR clashes (PR 93307)
PR analyzer/93307 reports that in an LTO bootstrap, there are ODR
violations between:
- the "region" type:
gcc/analyzer/region-model.h:792
vs:
gcc/sched-int.h:1443
- the "constraint" type:
gcc/analyzer/constraint-manager.h:121
vs:
gcc/tree-ssa-structalias.c:533
This patches solves this clash by putting all of the analyzer names
within a namespace. I chose "ana" as it is short (to save typing).
The analyzer selftests are moved from namespace "selftest" to
"ana::selftest".
There are various places where the namespace has to be closed
and reopened, to allow e.g. for specializations of templates
in the global namespace.
gcc/ChangeLog:
PR analyzer/93307
* gdbinit.in (break-on-saved-diagnostic): Update for move of
diagnostic_manager into "ana" namespace.
* selftest-run-tests.c (selftest::run_tests): Update for move of
selftest::run_analyzer_selftests to
ana::selftest::run_analyzer_selftests.
Marek Polacek [Tue, 21 Jan 2020 22:38:54 +0000 (17:38 -0500)]
PR c++/92907 - noexcept does not consider "const" in member functions.
Here the problem is that if the noexcept specifier is used in the context
of a const member function, const is not considered for the member variables,
leading to a bogus error. g's const makes its 'this' const, so the first
overload of f should be selected.
In cp_parser_noexcept_specification_opt we inject 'this', but always
unqualified:
25737 if (current_class_type)
25738 inject_this_parameter (current_class_type, TYPE_UNQUALIFIED);
so we need to pass the function's qualifiers down here. In
cp_parser_direct_declarator it's easy: use the just parsed cv_quals, in
cp_parser_late_noexcept_specifier look at the 'this' parameter to figure it
out.
2020-01-22 Marek Polacek <polacek@redhat.com>
PR c++/92907 - noexcept does not consider "const" in member functions.
* parser.c (cp_parser_lambda_declarator_opt): Pass the proper
qualifiers to cp_parser_exception_specification_opt.
(cp_parser_direct_declarator): Pass the function qualifiers to
cp_parser_exception_specification_opt.
(cp_parser_class_specifier_1): Pass the function declaration to
cp_parser_late_noexcept_specifier.
(cp_parser_late_noexcept_specifier): Add a tree parameter. Use it to
pass the qualifiers of the function to
cp_parser_noexcept_specification_opt.
(cp_parser_noexcept_specification_opt): New cp_cv_quals parameter.
Use it in inject_this_parameter.
(cp_parser_exception_specification_opt): New cp_cv_quals parameter.
Use it.
(cp_parser_transaction): Pass TYPE_UNQUALIFIED to
cp_parser_noexcept_specification_opt.
(cp_parser_transaction_expression): Likewise.
Patrick Palka [Thu, 16 Jan 2020 21:46:40 +0000 (16:46 -0500)]
Fix a couple of memory leaks in the C++ frontend
The leak in get_mapped_args is due to auto_vec not properly supporting
destructible elements in that auto_vec's destructor doesn't call the
destructors of its elements.
gcc/cp/ChangeLog:
* constraint.cc (get_mapped_args): Avoid using auto_vec
as a vector element. Release the vectors inside the lists
vector.
* parser.c (cp_literal_operator_id): Free the buffer.
cfgexpand: Update partition size when merging variables
cfgexpand sorts variables by decreasing size, so when merging a later
variable into an earlier one, there's usually no need to update the
merged size.
But for poly_int sizes, the sort function just uses a lexicographical
comparison of the coefficients, so e.g. 2X+2 comes before 0X+32.
Which is bigger depends on the runtime value of X.
This patch therefore takes the upper bound of the two sizes, which
is conservatively correct for variable-length vectors and a no-op
on other targets.
It's probably a bad idea to merge fixed-length and variable-length
variables in practice, but that's really an optimisation decision.
I think we should have this patch as a correctness fix either way.
This is easiest to test using the ACLE, but in principle it could happen
for autovectorised code too, e.g. when using OpenMP vector variables.
It's therefore a regression from GCC 8.
2020-01-22 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* cfgexpand.c (union_stack_vars): Update the size.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/general/stack_vars_1.c: New test.
Martin Liska [Wed, 22 Jan 2020 12:40:12 +0000 (13:40 +0100)]
Fix TOP N counter update.
PR tree-optimization/92924
* libgcov-profiler.c (__gcov_topn_values_profiler_body): First
try to find an existing value, then find an empty slot
if not found.
Richard Biener [Wed, 22 Jan 2020 11:38:12 +0000 (12:38 +0100)]
tree-optimization/93381 fix integer offsetting in points-to analysis
We were incorrectly assuming a merge operation is conservative enough
for not explicitely handled operations but we also need to consider
offsetting within fields when field-sensitive analysis applies.
2020-01-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/93381
* tree-ssa-structalias.c (find_func_aliases): Assume offsetting
throughout, handle all conversions the same.
The two patterns that call aarch64_expand_subvti ensure that {low,high}_in1
is a register, while {low,high}_in2 can be a register or immediate.
subdi3_compare1_imm uses the aarch64_plus_immediate predicate for its last
two operands (the value and negated value), but aarch64_expand_subvti calls
it whenever low_in2 is a CONST_INT, which leads to ICEs during vregs pass,
as the emitted insn is not recognized as valid subdi3_compare1_imm.
The following patch fixes that by only using subdi3_compare1_imm if it is ok
to do so, and otherwise force the constant into register and use the
non-immediate version - subdi3_compare1.
Furthermore, previously the code was calling force_reg on high_in2 only if
low_in2 is CONST_INT, on the (reasonable) assumption is that only if low_in2
is a CONST_INT, high_in2 can be non-REG, but with the above changes even in
the else we might have CONST_INT and force_reg doesn't do anything if the
operand is already a REG, so this patch calls it unconditionally.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/93335
* config/aarch64/aarch64.c (aarch64_expand_subvti): Only use
gen_subdi3_compare1_imm if low_in2 satisfies aarch64_plus_immediate
predicate, not whenever it is CONST_INT. Otherwise, force_reg it.
Call force_reg on high_in2 unconditionally.
Martin Liska [Wed, 22 Jan 2020 11:08:11 +0000 (12:08 +0100)]
Smart relaxation of TOP N counter.
PR tree-optimization/92924
* profile.c (compute_value_histograms): Divide
all counter values.
PR tree-optimization/92924
* libgcov-driver.c (prune_topn_counter): New.
(prune_counters): Likewise.
(dump_one_gcov): Prune a run-time counter.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
For a known value, add GCOV_TOPN_VALUES to value.
Otherwise, decrement all counters by one.
Richard Earnshaw [Wed, 22 Jan 2020 10:06:50 +0000 (10:06 +0000)]
contrib: script to create a new vendor branch
This script is intended to create a new vendor branch. Doing so is
not completely obvious if you are not familiar with the upstream
structure, so this takes the pain out of getting it right.
It doesn't check out the branch locally, but does set everything up so
that, if you have push enabled for your vendor branches, then
Jakub Jelinek [Wed, 22 Jan 2020 09:22:16 +0000 (10:22 +0100)]
i386: Fix up -fdollars-in-identifiers with identifiers starting with $ in -masm=att [PR91298]
In AT&T syntax leading $ is special, so if we have identifiers that start
with dollar, we usually fail to assemble it (or assemble incorrectly).
As mentioned in the PR, what works is wrapping the identifiers inside of
parens, like:
movl $($a), %eax
leaq ($a)(,%rdi,4), %rax
movl ($a)(%rip), %eax
movl ($a)+16(%rip), %eax
.globl $a
.type $a, @object
.size $a, 72
$a:
.string "$a"
.quad ($a)
(this is x86_64 -fno-pic -O2). In some places ($a) is not accepted,
like as .globl operand, in .type, .size, so the patch overrides
ASM_OUTPUT_SYMBOL_REF rather than e.g. ASM_OUTPUT_LABELREF.
I didn't want to duplicate what assemble_name is doing (following
transparent aliases), so split assemble_name into two parts; just
mere looking at the first character of a name before calling assemble_name
wouldn't be good enough, a transparent alias could lead from a name
not starting with $ to one starting with it and vice versa.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/91298
* output.h (assemble_name_resolve): Declare.
* varasm.c (assemble_name_resolve): New function.
(assemble_name): Use it.
* config/i386/i386.h (ASM_OUTPUT_SYMBOL_REF): Define.
* gcc.target/i386/pr91298-1.c: New test.
* gcc.target/i386/pr91298-2.c: New test.
Jakub Jelinek [Wed, 22 Jan 2020 08:50:53 +0000 (09:50 +0100)]
openmp: Teach omp_code_to_statement about rest of OpenMP statements
The omp_code_to_statement function added with the initial OpenACC support
only handled small subset of the OpenMP statements, leading to ICE if
any other OpenMP directive appeared inside of OpenACC directive.
JunMa [Thu, 21 Nov 2019 00:51:22 +0000 (08:51 +0800)]
Add error messages for missing methods of awaitable class
gcc/cp/ChangeLog
* coroutines.cc (lookup_awaitable_member): Lookup an awaitable member.
(lookup_promise_method): Emit diagnostic when get NULL_TREE back only.
(build_co_await): Use lookup_awaitable_member instead of lookup_member.
gcc/testsuite/ChangeLog
* g++.dg/coroutines/coro1-missing-await-method.C: New test.
projects / thirdparty / gcc.git / log
