George Joseph [Fri, 17 May 2019 23:44:37 +0000 (17:44 -0600)]
res_rtp_asterisk: Add ability to propose local address in ICE
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
Joshua Colp [Wed, 8 May 2019 15:41:43 +0000 (15:41 +0000)]
res_rtp_asterisk: Fix sequence number cycling and packet loss count.
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
Ben Ford [Tue, 7 May 2019 16:08:33 +0000 (11:08 -0500)]
pjsip_options.c: Allow immediate qualifies for new contacts.
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Kevin Harwell [Mon, 6 May 2019 21:26:46 +0000 (16:26 -0500)]
conversions.c: Add conversions for largest max sized integer
Added a conversion for umax (largest maximum sized integer allowed). Adjusted
the other current conversion functions (uint and ulong) to be derivatives of
the umax conversion since they are simply subsets of umax.
Also made the negative check move the pointer on spaces since strtoumax does it
anyways.
agupta [Fri, 3 May 2019 15:49:31 +0000 (21:19 +0530)]
stasis: Hangup channel for Local channel No such extension error
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
George Joseph [Fri, 3 May 2019 18:31:06 +0000 (12:31 -0600)]
build: Pass --fno-partial-inlining to third-party when appropriate
When the gcc version is >= 8.2.1, we were already setting the
--fno-partial-inlining flag for Asterisk source files to get around
a gcc bug but we weren't passing the flag down to the bundled
builds of pjproject and jansson.
George Joseph [Thu, 2 May 2019 18:29:49 +0000 (12:29 -0600)]
res_pjsip: Check return from pjsip_parse_uri calls
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402 Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
stasis: Only place stasis created and dialed channels into dial bridge.
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
After a bridge has been deleted the stasis control will depart
the channel and might attempt to re-add it to the dial bridge.
The later can fail and this can lead to a situation that the stasis
control is unlinked but the after_bridge_cb_failed cb is executed trying
to access a dangling control object.
Fix it by calling the after_cb's before bridge_channel_impart_signal.
app_confbridge: Add "all" variants of REMB behavior.
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
rtp: Add support for transport-cc in receiver direction.
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
Ben Ford [Tue, 23 Apr 2019 14:47:45 +0000 (09:47 -0500)]
stasis: Fix crash at shutdown.
When compiling in dev mode, stasis statistics are enabled and can cause
a crash at shutdown due to the following:
- Containers are freed
- Topics and subscriptions remain
- When those topics and subscriptions are deallocated, they go to do
things with the container
This changes the containers to global ao2 objects, and whenever needed
in the code, a reference must be obtained and checked before any
operations can be done.
Antoni Goldstein [Fri, 29 Mar 2019 14:04:46 +0000 (14:04 +0000)]
app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
Kevin Harwell [Tue, 9 Apr 2019 18:48:49 +0000 (13:48 -0500)]
mwi core: Move core MWI functionality into its own files
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
George Joseph [Mon, 22 Apr 2019 16:12:33 +0000 (10:12 -0600)]
ARI: Bump non-breaking version number to 4.0.2
main/json.c: Added app_name, app_data to channel type
res/res_ari: Added ARI resource /ari/channels/{channelId}/rtp_statistics
res/res_ari: Added timestamp as a requirement for all ARI events
core/buildsystem: check the actual compiler being version
Make compiler check use the output of the actual compiler being
used as reported by the CC variable, instead of unconditionally
running the "gcc" binary. Also only run the check if the compiler
is gcc or a cross-compile gcc.
We changed the validation of autocomplete parameter in the "indications
remove" command to avoid continue the execution of the command after
asking for autocomplete out of range parameters.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
George Joseph [Fri, 12 Apr 2019 16:32:44 +0000 (10:32 -0600)]
CI: Move test group config files to Jenkins
One of the downaides of having things like test configuration
in the git repo is that it can't be changed at runtime. You have
to create a review for the changes and merge it mefore it will
take effect.
This review moves the data currently held in
tests/CI/periodic-dailyTestGroups.json and
tests/CI/gateTestGroups.json into a Jenkins Config File attached
to the job definitions. This allows us to alter it from the
Jenkins UI at runtime. The original files stay in the repo
as documentation.
Sean Bright [Tue, 9 Apr 2019 15:10:12 +0000 (11:10 -0400)]
app_voicemail: Cleanup stale lock files on module load
If Asterisk crashes while a VM directory is locked, lock files in the VM
spool directory will not get properly cleaned up. We now clear them on
module load.
Sean Bright [Thu, 11 Apr 2019 20:48:49 +0000 (16:48 -0400)]
res_ael: Create consistent label names across reloads
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
Sean Bright [Thu, 11 Apr 2019 16:03:07 +0000 (12:03 -0400)]
res_ael: Fix pattern matching against literal '+'
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
Ben Ford [Mon, 1 Apr 2019 19:57:14 +0000 (14:57 -0500)]
build: Revise CHANGES and UPGRADE.txt handling.
This changes the way that we handle adding changes to CHANGES and
UPGRADE.txt. The reason for this is because whenever someone needed to
make a change to one of these files and someone else had already done
so, you would run into merge conflicts. With this new setup, there will
never be merge conflicts since all changes will be documented in the
doc/<file>-staging directory. The release script is now responsible for
merging all of these changes into the appropriate files.
There is a special format that these files have to follow in order to be
parsed. The files do not need to have a meaningful name, but it is
strongly recommended. For example, if you made a change to pjsip, you
may have something like this "res_pjsip_relative_title", where
"relative_title" is something more descriptive than that. Inside each
file, you will need a subject line for your change, followed by a
description. There can be multiple subject lines. The file may look
something like this:
Subject: res_pjsip
Subject: Core
A description that explains the changes made and why. The release
script will handle the bulleting and section separators!
You can still separate with new lines within your
description.
The headers ("Subject" and "Master-Only") are case sensative, but the
value for "Master-Only" ("true" or "True") is not.
For more information, check out the wiki page:
https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt
When extconfig.conf file is parsed, the code previously searched for
character comma without verifying if error (null or blank). This caused
a segmentation error.
sungtae kim [Thu, 21 Mar 2019 23:09:14 +0000 (00:09 +0100)]
main/json.c: Added app_name, app_data to channel type
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
Asterisk assumes that dlopen() will always run the constructor of a
shared library and every dlclose() will run its destructor. But dlopen()
may be permanent, meaning the constructor will only be run once, as is
the case with musl libc.
With a permanent dlopen() the Asterisk module loader does not work
correctly, because it's expectations regarding when the constructors and
destructors are run are not met. In fact a segmentation fault will occur
when the first module is "re-opened" that has AST_MODFLAG_GLOBAL_SYMBOLS
set (the dlopen() does not call the constructor, resource_being_loaded
is not set to NULL, then strlen is called with NULL instead of a string,
see issue ASTERISK-28319).
This commit adds code to the loader that will manually run the
constructors/destructors of the (non-builtin) modules where needed. To
achieve this a new ao2 container (linked list) is started and filled
with objects that contain the names of the modules and the pointers to
their respective info structs.
This behavior can be activated when configuring Asterisk
(--enable-permanent-dlopen). By default this is disabled, of course.
ASTERISK-28319 #close
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change-Id: I86693a0ecf25d5ba81c73773a03df4abc3426875
Ben Ford [Wed, 3 Apr 2019 15:24:06 +0000 (10:24 -0500)]
build: Fix compiler warnings/errors.
The compiler complained about a couple of variables that weren't
initialized but were being used. Initializing them to NULL resolves the
warnings/errors.
Kevin Harwell [Wed, 27 Mar 2019 17:59:30 +0000 (12:59 -0500)]
bridge_softmix: use a float type to store the internal REMB bitrate
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
res/res_rtp_asterisk: Enable rxjitter calculation for video
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Ben Ford [Tue, 26 Mar 2019 19:56:37 +0000 (14:56 -0500)]
alembic: Fix errors during upgrade head.
When trying to upgrade using alembic, a couple different errors kept
popping up that prevented the upgrade. An additional parameter was
needed when changing the schema for mwi_subscribe_replaces_unsolicited
from an integer to an enum. When changing from a string to an enum, the
type needed to be cast for postgresql. The other issue was a parameter
being used during column creation that did not exist.
After fixing the upgrade process, it revealed errors with the downgrade
process. One was a variable not being defined in the downgrade function,
and the other was tables not existing when using MySQL. This was due to
a context check that should have encompassed MySQL, but in the end was
not doing so.
Ben Ford [Wed, 27 Mar 2019 16:03:40 +0000 (11:03 -0500)]
build: Add staging directories for future changes.
This is the first step in changing the release process so that changes
made to the CHANGES and UPGRADE.txt files do not result in merge
conflicts every time multiple people modify these files. The changes
made will go in these new directories: doc/CHANGES-staging and
doc/UPGRADE-staging. The README.md files explain how things will work,
but here's a little overview. When you make a change that would go in
either CHANGES or UPGRADE.txt, this should instead be documented in a
new file in the doc/CHANGES-staging or doc/UPGRADE-staging directory,
respectively. The format will look like this:
Subject: res_pjsip
A description that explains the changes made and why. The release
script will handle the bulleting and section separators! The
'Subject:' header is case-sensitive.
You can still separate with new lines within your description.
Subject: res_ari
Master-Only: true
You can have more than one subject, and they don't have to be the
same! Also, the 'Master-Only' header should always be true and is
also case-sensitive (but the value is not - you can have 'true' or
'True'). This header will only ever be present in the master branch.
For more information, check out the wiki page:
https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt
This is an initial change for ASTERISK_28111. Functionally, this will
make no difference, but it will prep the directories for when the
changes from CHANGES and UPGRADE.txt are extracted.
Joshua Colp [Mon, 25 Mar 2019 11:34:09 +0000 (08:34 -0300)]
manager: Use separate lock for session event notification.
When notifying a manager session that new events were available
the same lock was used that was also held when doing things within
the session (such as sending events out). If the manager session
blocked for a period of time this would cause a back up of messages
in Stasis and would also block any other sessions from receiving
events.
This change adds a separate lock to the manager session which is
strictly used for notifying it that new events are available.
sungtae kim [Wed, 6 Mar 2019 22:21:42 +0000 (23:21 +0100)]
res/res_ari: Added timestamp as a requirement for all ARI events
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
projects / thirdparty / asterisk.git / log
