Arnd Bergmann [Fri, 21 Nov 2025 15:36:49 +0000 (16:36 +0100)]
Merge tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
* tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: enable display panel support
arm64: dts: exynos7870-a2corelte: enable display panel support
arm64: dts: exynos7870-on7xelte: enable display panel support
arm64: dts: exynos7870: add DSI support
arm64: dts: exynos: gs101: fix sysreg_apm reg property
arm64: dts: exynos: gs101: fix clock module unit reg sizes
arm64: dts: exynos: gs101: add sysreg_misc and sysreg_hsi0 nodes
arm64: dts: exynos: gs101: add OPPs
arm64: dts: exynos: gs101: add CPU clocks
arm64: dts: exynos: gs101: add #clock-cells to the ACPM protocol node
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
arm64: dts: exynos: gs101-pixel-common: add node for s2mpg10 / clock
arm64: dts: exynos990: Add sysreg nodes for PERIC0 and PERIC1
arm64: dts: exynosautov920: add CMU_MFC clock DT nodes
arm64: dts: exynosautov920: add CMU_M2M clock DT nodes
arm64: dts: exynos7870-on7xelte: add bus-width to mmc0 node
arm64: dts: exynos7870-j6lte: add bus-width to mmc0 node
arm64: dts: exynos7870-a2corelte: add bus-width to mmc0 node
Arnd Bergmann [Fri, 21 Nov 2025 15:35:57 +0000 (16:35 +0100)]
Merge tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for v6.19
Add PWM controlled fan and it's associated thermal management for the
Lichee Pi 4A board.
Enable additional ISA extenstions supported by the T-Head C910 cores:
Zfh, Ziccrse, XTheadvector.
Add reset controllers of more TH1520 subsystems: AP, AO, DSP, MISC, VI.
Signed-off-by: Drew Fustini <fustini@kernel.org>
* tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: Add reset controllers of more subsystems for TH1520
riscv: dts: thead: Add PWM fan and thermal control
riscv: dts: thead: Add PWM controller node
riscv: dts: thead: add zfh for th1520
riscv: dts: thead: add ziccrse for th1520
riscv: dts: thead: add xtheadvector to the th1520 devicetree
Arnd Bergmann [Fri, 21 Nov 2025 15:30:47 +0000 (16:30 +0100)]
Merge tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
Arnd Bergmann [Fri, 21 Nov 2025 15:28:42 +0000 (16:28 +0100)]
Merge tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes:
- The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems
New platforms:
- IBM Balcones
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed.
- Meta Yosemite5
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components.
Updated platforms:
- clemente (Meta): LEDs, shunt resistor configuration
- santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs
There are a scattering of one-off changes and devicetree cleanups for other
platforms as well.
* tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module
ARM: dts: aspeed: santabarbara: Add AMD APML interface support
ARM: dts: aspeed: santabarbara: Add gpio line name
ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led
ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
ARM: dts: aspeed: santabarbara: Add sensor support for extension boards
ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability
ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
dt-bindings: arm: aspeed: add Meta Yosemite5 board
ARM: dts: aspeed: clemente: Add HDD LED GPIO
ARM: dts: aspeed: Fix max31785 fan properties
ARM: dts: aspeed: Add Balcones system
dt-bindings: arm: aspeed: add IBM Bonnell board
dt-bindings: arm: aspeed: add IBM Balcones board
ARM: dts: aspeed: harma: Add MCTP I2C controller node
ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic
ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i
Arnd Bergmann [Fri, 21 Nov 2025 15:26:17 +0000 (16:26 +0100)]
Merge tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux into soc/dt
PXA1908 DT changes for 6.19
Rollup of hardware support which has accumulated since support for the
SoC and coreprimevelte board was merged. This most notably includes
eMMC, PMIC, backlight and touchscreen. A few QoL fixes are also
included.
* tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux:
arm64: dts: marvell: pxa1908: Add power domains
arm64: dts: marvell: samsung,coreprimevelte: Add USB connector
arm64: dts: marvell: samsung,coreprimevelte: Fill in memory node
arm64: dts: marvell: samsung,coreprimevelte: Drop some reserved memory
arm64: dts: marvell: pxa1908: Move ramoops to SoC dtsi
arm64: dts: marvell: samsung,coreprimevelte: Add vibrator
arm64: dts: marvell: pxa1908: Add PWMs
arm64: dts: marvell: samsung,coreprimevelte: Enable eMMC
arm64: dts: marvell: samsung,coreprimevelte: Correct CD GPIO
arm64: dts: marvell: samsung,coreprimevelte: Add backlight
arm64: dts: samsung,coreprimevelte: add SDIO
arm64: dts: samsung,coreprimevelte: add touchscreen
arm64: dts: samsung,coreprimevelte: add PMIC
arm64: dts: exynos7870-j6lte: enable display panel support
Enable DECON and DSI nodes, and add the compatible display panel and
appropriate panel timings for this device. Also, remove the
simple-framebuffer node in favor of the panel.
This device has a 720x1480 AMOLED Samsung AMS561RA01 panel with
S6E8AA5X01 controller.
arm64: dts: exynos7870-a2corelte: enable display panel support
Enable DECON and DSI nodes, and add the compatible display panel and
appropriate panel timings for this device. Also, remove the
simple-framebuffer node in favor of the panel.
This device has a 540x960 Synaptics TD4101 display panel.
arm64: dts: exynos7870-on7xelte: enable display panel support
Enable DECON and DSI nodes, and add the compatible display panel and
appropriate panel timings for this device. Also, remove the
simple-framebuffer node in favor of the panel.
This device has a 1080x1920 Synaptics TD4300 display panel.
Add devicetree nodes for MIPI PHYs, Samsung's DECON and DSIM blocks, and
DECON IOMMU devicetree nodes. Enables SoC support for hardware to be
able to drive a MIPI DSI display.
Yao Zi [Tue, 14 Oct 2025 13:10:32 +0000 (13:10 +0000)]
riscv: dts: thead: Add reset controllers of more subsystems for TH1520
Describe reset controllers for VI, MISC, AP, DSP and AO subsystems. The
one for AO subsystem is marked as reserved, since it may be used by AON
firmware.
Reviewed-by: Drew Fustini <fustini@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Drew Fustini <fustini@kernel.org>
Marek Vasut [Mon, 27 Oct 2025 18:45:53 +0000 (19:45 +0100)]
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
The DisplayPort connector on Retronix R-Car V4H Sparrow Hawk board
is a full-size DisplayPort connector. Fix the copy-paste error and
update the DT node name and labels accordingly. No functional change.
Wolfram Sang [Tue, 7 Oct 2025 10:46:25 +0000 (12:46 +0200)]
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
The 'ethernet-ports' node in the SoC DTSI handles them already. Fixes:
arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: switch@44050000 (renesas,r9a06g032-a5psw): Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
Use the more modern adi,adv7180cp compatible for the CVBS input found on
R-Car Gen2 Koelsch boards. This aligns the bindings with the other Gen2
board with the same setup Gose.
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7793: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7792: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7791: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7790: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a77470: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7745: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7744: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7743: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7742: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r7s72100: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
Wolfram Sang [Mon, 29 Sep 2025 09:36:02 +0000 (11:36 +0200)]
ARM: dts: renesas: gose: Remove superfluous port property
'bus-width' is defined for the corresponding vin input port already.
No need to declare it in the output port again. Fixes:
arch/arm/boot/dts/renesas/r8a7793-gose.dtb: composite-in@20 (adi,adv7180cp): ports:port@3:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
Wolfram Sang [Thu, 25 Sep 2025 09:39:51 +0000 (11:39 +0200)]
arm64: dts: renesas: eagle/v3msk: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
V3M boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:50 +0000 (11:39 +0200)]
arm64: dts: renesas: ebisu: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Ebisu boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:49 +0000 (11:39 +0200)]
arm64: dts: renesas: draak: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Draak boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:48 +0000 (11:39 +0200)]
arm64: dts: renesas: ulcb: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
ULCB boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:47 +0000 (11:39 +0200)]
arm64: dts: renesas: salvator-common: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Salvator boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
arm64: dts: renesas: r9a09g087: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g077: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g057: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g056: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g047: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g011: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a08g045: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g054: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g044: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g043u: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779h0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779g0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779f0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779a0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77995: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77990: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77980: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77970: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77965: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77961: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77960: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77951: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774e1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774c0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774b1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774a1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
Linus Torvalds [Sun, 26 Oct 2025 17:33:46 +0000 (10:33 -0700)]
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Linus Torvalds [Sun, 26 Oct 2025 17:29:45 +0000 (10:29 -0700)]
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Linus Torvalds [Sun, 26 Oct 2025 17:24:39 +0000 (10:24 -0700)]
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Linus Torvalds [Sun, 26 Oct 2025 16:57:18 +0000 (09:57 -0700)]
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Linus Torvalds [Sun, 26 Oct 2025 16:54:36 +0000 (09:54 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Linus Torvalds [Sun, 26 Oct 2025 16:44:36 +0000 (09:44 -0700)]
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
Linus Torvalds [Sun, 26 Oct 2025 16:42:19 +0000 (09:42 -0700)]
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Linus Torvalds [Sun, 26 Oct 2025 16:40:16 +0000 (09:40 -0700)]
Merge tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Linus Torvalds [Sat, 25 Oct 2025 16:35:26 +0000 (09:35 -0700)]
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Linus Torvalds [Sat, 25 Oct 2025 16:31:13 +0000 (09:31 -0700)]
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
Linus Torvalds [Sat, 25 Oct 2025 01:50:15 +0000 (18:50 -0700)]
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
projects / thirdparty / kernel / linux.git / log
