H.J. Lu [Thu, 20 Sep 2007 17:38:38 +0000 (17:38 +0000)]
gas/
2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
PR 658
* config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
(set_allow_index_reg): New.
(allow_index_reg): Likewise.
(md_pseudo_table): Add "allow_index_reg" and
"disallow_index_reg".
(build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
fake index registers.
(i386_scale): Updated.
(i386_index_check): Support fake index registers.
(parse_real_register): Return NULL on eiz/riz if fake index
registers aren't allowed.
gas/testsuite/
2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
PR 658
* gas/i386/i386.exp: Run sib-intel, x86-64-sib and
x86-64-sib-intel.
PR 658
* 386-dis.c (index64): New.
(index32): Likewise.
(intel_index64): Likewise.
(intel_index32): Likewise.
(att_index64): Likewise.
(att_index32): Likewise.
(print_insn): Set index64 and index32.
(OP_E_extended): Use index64/index32 for index register for
SIB with INDEX == 4.
* i386-opc.h (RegEiz): New.
(RegRiz): Likewise.
* i386-reg.tbl: Add eiz and riz.
* i386-tbl.h: Regenerated.
Joel Brobecker [Wed, 19 Sep 2007 22:00:34 +0000 (22:00 +0000)]
* configure.ac: Add check for "etext".
* configure, config.in: Regenerate.
* maint.c (TEXTEND): Only define if either _etext or etext
are available.
Disable the profiling functionality if TEXTEND is not defined.
* mips-tdep.c (mips_stub_frame_cache): Correct the saved return
address register. Correct the call to frame_id_build.
(mips_stub_frame_sniffer): Use the stub unwinder when the PC
is invalid.
* inf-ttrace.c (inf_ttrace_private_thread_info): New structure type.
(inf_ttrace_delete_dying_threads_callback): New function.
(inf_ttrace_resume): After resuming the execution, iterate over
the dying threads to delete them for the thread list.
(inf_ttrace_wait): on TTEVT_LWP_EXIT and TTEVT_LWP_TERMINATE,
mark the corresponding thread as dying instead of removing it
from the thread list.
(inf_ttrace_thread_alive): return 0 for dying threads.
* ldexp.c (fold_binary): Set expld.dataseg.relro to
exp_dataseg_relro_start or exp_dataseg_relro_end when
seeing DATA_SEGMENT_ALIGN or DATA_SEGMENT_RELRO_END,
respectively.
* ldlang.c (lang_size_sections_1): Properly set
expld.dataseg.relro_start_stat and
expld.dataseg.relro_end_stat.
(find_relro_section_callback): New function.
(lang_find_relro_sections_1): Likewise.
(lang_find_relro_sections): Likewise.
(lang_process): Call lang_find_relro_sections for
non-relocatable link.
ld/testsuite/
2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/3281
PR binutils/5037
* ld-elf/binutils.exp: Update "-z relro" tests to use relro1.s.
Add "-z relro" tests with relro2.s. Add "-z relro" tests with
TLS for objcopy.
* ld-elf/relro1.s: New file.
* ld-elf/relro2.s: Likewise.
Joel Brobecker [Mon, 17 Sep 2007 19:32:53 +0000 (19:32 +0000)]
* solib-svr4.c: Add include of "auxv.h".
(enable_break): Use the AT_BASE auxiliary entry if available.
* Makefile.in (solib-svr4.o): Update dependencies.
* schedlock.c (NUM): Change to 1.
(main): Use args[0] for the main thread.
* schedlock.exp: Only expect two threads. Only issue one pass or fail
regardless of the number of threads.
Alan Modra [Sat, 15 Sep 2007 06:21:06 +0000 (06:21 +0000)]
PR ld/5025
* emultempl/elf32.em (write_build_id_section): Correct test for
"missing" .note.gnu.build-id. Downgrade error to a warning if
it has been discarded.
* gdb.mi/mi-watch.exp (test_watchpoint_all): Pass the watchpoint
type down.
(test_watchpoint_triggering): XFAIL the sw watchpoint scope
test.
* gdb.mi/mi2-watch.exp (test_watchpoint_all): Pass the
watchpoint type down.
(test_watchpoint_triggering): XFAIL the sw watchpoint scope
test.
[mti-fix-scope]
* gdb.mi/mi-watch.exp (test_watchpoint_all): New function.
Move all the tests here and run them twice, once using software
watchpoints and once using hardware watchpoints.
* gdb.mi/mi2-watch.exp (test_watchpoint_all): Likewise.
* configure.ac (mips*-sde-elf*): New stanza. Add target-libiberty
to $skipdirs and only disable gprof for newlib. Use the normal
mips*-elf* handling in other respects.
* configure: Regnerate.
Alan Modra [Fri, 14 Sep 2007 07:54:10 +0000 (07:54 +0000)]
* opncls.c (find_separate_debug_file): Ensure bfd_set_error has
been called on all error return paths.
(bfd_fill_in_gnu_debuglink_section): Use bfd_malloc, not malloc.
Clear padding after filename
Alan Modra [Fri, 14 Sep 2007 05:19:27 +0000 (05:19 +0000)]
* format.c (bfd_check_format_matches): Record matching targets even
when "matching" is NULL to allow bfd_associated_vector matches.
Consolidate error return code. Consolidate ok return code. Always
restore original target and format on error.
Alan Modra [Thu, 13 Sep 2007 14:58:47 +0000 (14:58 +0000)]
bfd/
* configure.in: Delete BFD_HOST_LONG_LONG and bfd checks for
long long. Partly revert 2007-07-12 change, so that
BFD_HOST_64BIT_LONG and BFD_HOST_64BIT_LONG_LONG are set
independent of "void *" size.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
bfd/doc/
* Makefile.in: Regenerate.
* configure.ac (--enable-stage1-checking): If neither --enable-checking
nor --disable-checking is provided also turn on yes and types
checking for stage1.
* configure: Re-generate.
Jan Beulich [Wed, 12 Sep 2007 13:20:31 +0000 (13:20 +0000)]
gas/testsuite/
2007-09-12 Jan Beulich <jbeulich@novell.com>
* gas/i386/sse4_1.s, gas/i386/x86-64-sse4_1.s: Add two-operand forms
of blendvps, blendvpd, and pblendvb.
* gas/i386/sse4_1.d, gas/i386/sse4_1-intel.d,
gas/i386/x86-64-sse4_1.d, gas/i386/x86-64-sse4_1-intel.d: Adjust,
making last/first operand of blendvps, blendvpd, and pblendvb
optional.
opcodes/
2007-09-12 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl: Add two-operand forms of blendvps, blendvpd, and
pblendvb.
* i386-tbl.h: Regenerate.
projects / thirdparty / binutils-gdb.git / log
