A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X.
Fixes: 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information") Signed-off-by: Mengbiao Xiong <xisme1998@gmail.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2e5 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0c96f552 ("perf sched: Finish latency => atom rename and misc cleanups") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In many perf sched subcommand saves priv data structure in the thread
but it forgot to free them. As it's an opaque type with 'void *', it
needs to register that knows how to free the data. In this case, just
regular 'free()' is fine.
Fixes: 04cb4fc4d40a5bf1 ("perf thread: Allow tools to register a thread->priv destructor") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-3-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kcore loading creates a set of list nodes that have reference
counted references to maps of the kcore. The list node freeing in the
success path wasn't releasing the maps, add the missing puts. It is
unclear why this leak was being missed by leak sanitizer.
Fixes: 83720209961f ("perf map: Move map list node into symbol") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624190326.2038704-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently perf aborts when it finds an invalid command. I guess it
depends on the environment as I have some custom commands in the path.
$ perf bad-command
perf: 'bad-command' is not a perf-command. See 'perf --help'.
Aborted (core dumped)
It's because the exclude_cmds() in libsubcmd has a use-after-free when
it removes some entries. After copying one to another entry, it keeps
the pointer in the both position. And the next copy operation will free
the later one but it's the same entry in the previous one.
For example, let's say cmds = { A, B, C, D, E } and excludes = { B, E }.
ci cj ei cmds-name excludes
-----------+--------------------
0 0 0 | A B : cmp < 0, ci == cj
1 1 0 | B B : cmp == 0
2 1 1 | C E : cmp < 0, ci != cj
At this point, it frees cmds->names[1] and cmds->names[1] is assigned to
cmds->names[2].
3 2 1 | D E : cmp < 0, ci != cj
Now it frees cmds->names[2] but it's the same as cmds->names[1]. So
accessing cmds->names[1] will be invalid.
This makes the subcmd tests succeed.
$ perf test subcmd
69: libsubcmd help tests :
69.1: Load subcmd names : Ok
69.2: Uniquify subcmd names : Ok
69.3: Exclude duplicate subcmd names : Ok
Fixes: 4b96679170c6 ("libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded") Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250701201027.1171561-3-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fpfd_max frequency should be set to 450 MHz instead of 300 MHz.
Well, it actually depends on the platform speed grade but we are being
conservative for ultrascale so let's be consistent. In a following
change we will set these limits at runtime.
Unlike file_handle, type and len of struct fanotify_fh are u8.
Traditionally, filesystem return handle_type < 0xff, but there
is no enforecement for that in vfs.
Add a sanity check in fanotify to avoid truncating handle_type
if its value is > 0xff.
Fixes: 7cdafe6cc4a6 ("exportfs: check for error return value from exportfs_encode_*()") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250627104835.184495-1-amir73il@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize
the pinctrl_map array, the function returns -ENOMEM directly
without freeing the previously allocated *map buffer. This results
in a memory leak of the original kmalloc_array allocation.
According the function documentation of epf_ntb_init_epc_bar(), the
function should return an error code on error. However, it returns -1 when
no BAR is available i.e., when pci_epc_get_next_free_bar() fails.
Return -ENOENT instead.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: changed err code to -ENOENT] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-1-fc685a22ad28@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org>
I get a very rare -Wstringop-overread warning with gcc-15 for one function
in aesbs_ctr_encrypt():
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:212:1446: error: '__builtin_memcpy' offset [17, 2147483647] is out of the bounds [0, 16] of object 'buf' with type 'u8[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds=]
212 | src = dst = memcpy(buf + sizeof(buf) - bytes,
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:218:17: error: 'aesbs_ctr_encrypt' reading 1 byte from a region of size 0 [-Werror=stringop-overread]
218 | aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 2 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 3 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 6 of type 'u8[0]' {aka 'unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:36:17: note: in a call to function 'aesbs_ctr_encrypt'
36 | asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
This could happen in theory if walk.nbytes is larger than INT_MAX and gets
converted to a negative local variable.
Keep the type unsigned like the orignal nbytes to be sure there is no
integer overflow.
Fixes: c8bf850e991a ("crypto: arm/aes-neonbs-ctr - deal with non-multiples of AES block size") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs") Signed-off-by: Charles Han <hanchunchao@inspur.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953c1 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503df0 ("media: controls: Validate H264 stateless controls") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated.
Fixes: c6ed4d734bc7 ("clk: davinci: New driver for davinci PSC clocks") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://lore.kernel.org/r/20250401131341.26800-1-bsdhenrymartin@gmail.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The expression '1 << EraseUnitSize' is evaluated in int, which causes
a negative result when shifting by 31 - the upper bound of the valid
range [10, 31], enforced by scan_header(). This leads to incorrect
extension when storing the result in 'erase->len' (uint64_t), producing
a large unexpected value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2") Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
rt->fib6_nsiblings can be read locklessly, add corresponding
READ_ONCE() and WRITE_ONCE() annotations.
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Hardware returns a unique identifier for a decrypted packet's xfrm
state, this state is looked up in an xarray. However, the state might
have been freed by the time of this lookup.
Currently, if the state is not found, only a counter is incremented.
The secpath (sp) extension on the skb is not removed, resulting in
sp->len becoming 0.
Subsequently, functions like __xfrm_policy_check() attempt to access
fields such as xfrm_input_state(skb)->xso.type (which dereferences
sp->xvec[sp->len - 1]) without first validating sp->len. This leads to
a crash when dereferencing an invalid state pointer.
This patch prevents the crash by explicitly removing the secpath
extension from the skb if the xfrm state is not found after hardware
decryption. This ensures downstream functions do not operate on a
zero-length secpath.
When updating the PBMC register, we read its current value,
modify desired fields, then write it back.
The port_buffer_size field within PBMC is Read-Only (RO).
If this RO field contains a non-zero value when read,
attempting to write it back will cause the entire PBMC
register update to fail.
This commit ensures port_buffer_size is explicitly cleared
to zero after reading the PBMC register but before writing
back the modified value.
This allows updates to other fields in the PBMC register to succeed.
Assign netdev.dev_port based on the device channel index, to indicate the
port number of the network device.
While this driver already uses netdev.dev_id for that purpose, dev_port is
more appropriate. However, retain dev_id to avoid potential regressions.
Fixes: 3e66d0138c05 ("can: populate netdev::dev_id for udev discrimination") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123452.41-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The latest firmware versions of USB CAN FD interfaces export the EP numbers
to be used to dialog with the device via the "type" field of a response to
a vendor request structure, particularly when its value is greater than or
equal to 2.
Correct the driver's test of this field.
Fixes: 4f232482467a ("can: peak_usb: include support for a new MCU") Signed-off-by: Stephane Grosjean <stephane.grosjean@hms-networks.com> Link: https://patch.msgid.link/20250724081550.11694-1-stephane.grosjean@free.fr Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the userspace RV tool skips trace events triggered by the RV
tool itself, this can be changed by passing the parameter -s, which sets
the variable config_my_pid to 0 (instead of the tool's PID).
This has the side effect of skipping events generated by idle (PID 0).
Set config_my_pid to -1 (an invalid pid) to avoid skipping idle.
Cc: Nam Cao <namcao@linutronix.de> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250723161240.194860-2-gmonaco@redhat.com Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Event_Type field in an LE Extended Advertising Report uses bits 5
and 6 for data status (e.g. truncation or fragmentation), not the PDU
type itself.
The ext_evt_type_to_legacy() function fails to mask these status bits
before evaluation. This causes valid advertisements with status bits set
(e.g. a truncated non-connectable advertisement, which ends up showing
as PDU type 0x40) to be misclassified as unknown and subsequently
dropped. This is okay for most checks which use bitwise AND on the
relevant event type bits, but it doesn't work for non-connectable types,
which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero).
In terms of behaviour, first the device sends a truncated report:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0040
Data status: Incomplete, data truncated, no more to come
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -98 dBm (0x9e)
Data length: 0x00
Then, a few seconds later, it sends the subsequent complete report:
> HCI Event: LE Meta Event (0x3e) plen 122
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -97 dBm (0x9f)
Data length: 0x60
Service Data: Google (0xfef3)
Data[92]: ...
These devices often send multiple truncated reports per second.
This patch introduces a PDU type mask to ensure only the relevant bits
are evaluated, allowing for the correct translation of all valid
extended advertising packets.
Fixes: b2cc9761f144 ("Bluetooth: Handle extended ADV PDU types") Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel/kcsan/kcsan_test.c:591:41: error: variable 'dummy' is
uninitialized when passed as a const pointer argument here
[-Werror,-Wuninitialized-const-pointer]
591 | KCSAN_EXPECT_READ_BARRIER(atomic_read(&dummy), false);
| ^~~~~
1 error generated.
Although this particular test does not care about the value stored in
the dummy atomic variable, let's silence the warning.
Link: https://lkml.kernel.org/r/CA+G9fYu8JY=k-r0hnBRSkQQrFJ1Bz+ShdXNwC1TNeMt0eXaxeA@mail.gmail.com Fixes: 8bc32b348178 ("kcsan: test: Add test cases for memory barrier instrumentation") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While I caught the need for setting cnt early in nl80211_parse_rnr_elems()
in the original annotation of struct cfg80211_rnr_elems with __counted_by,
I missed a similar pattern in ieee80211_copy_rnr_beacon(). Fix this by
moving the cnt assignment to before the loop.
Fixes: 7b6d7087031b ("wifi: cfg80211: Annotate struct cfg80211_rnr_elems with __counted_by") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721182521.work.540-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently there is no endian conversion in ath12k_wmi_tlv_services_parser()
so the service bit parsing will be incorrect on a big endian platform and
to fix this by using appropriate endian conversion.
Fixes: 342527f35338 ("wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory") Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250717173539.2523396-2-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With 802.11 encapsulation offloading, ieee80211_tx_h_select_key() is
called on 802.3 frames. In that case do not try to use skb data as
valid 802.11 headers.
Ignore TXQs with the flag IEEE80211_TXQ_STOP when scheduling a queue.
The flag is only set after all fragments have been dequeued and won't
allow dequeueing other frames as long as the flag is set.
For drivers using ieee80211_txq_schedule_start() this prevents an
loop trying to push the queued frames while IEEE80211_TXQ_STOP is set:
After setting IEEE80211_TXQ_STOP the driver will call
ieee80211_return_txq(). Which calls __ieee80211_schedule_txq(), detects
that there sill are frames in the queue and immediately restarts the
stopped TXQ. Which can't dequeue any frame and thus starts over the loop.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Link: https://patch.msgid.link/20250717162547.94582-2-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If probe fails before ieee80211_register_hw() is successfully done,
ieee80211_unregister_hw() will be called anyway. This may lead to various
bugs as the implementation of ieee80211_unregister_hw() assumes that
ieee80211_register_hw() has been called.
Divide error handling section into relevant subsections, so that
ieee80211_unregister_hw() is called only when it is appropriate. Correct
the order of the calls: ieee80211_unregister_hw() should go before
plfxlc_mac_release(). Also move ieee80211_free_hw() to plfxlc_mac_release()
as it supposed to be the opposite to plfxlc_mac_alloc_hw() that calls
ieee80211_alloc_hw().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250321185226.71-3-m.masimov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot triggered a WARN in ieee80211_tdls_oper() by sending
NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT,
before association completed and without prior TDLS setup.
This left internal state like sdata->u.mgd.tdls_peer uninitialized,
leading to a WARN_ON() in code paths that assumed it was valid.
Reject the operation early if not in station mode or not associated.
Reported-by: syzbot+f73f203f8c9b19037380@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f73f203f8c9b19037380 Fixes: 81dd2b882241 ("mac80211: move TDLS data to mgd private part") Tested-by: syzbot+f73f203f8c9b19037380@syzkaller.appspotmail.com Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com> Link: https://patch.msgid.link/20250715230904.661092-2-moonhee.lee.ca@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The AMD IOMMU documentation seems pretty clear that the V2 table follows
the normal CPU expectation of sign extension. This is shown in
Figure 25: AMD64 Long Mode 4-Kbyte Page Address Translation
Where bits Sign-Extend [63:57] == [56]. This is typical for x86 which
would have three regions in the page table: lower, non-canonical, upper.
The manual describes that the V1 table does not sign extend in section
2.2.4 Sharing AMD64 Processor and IOMMU Page Tables GPA-to-SPA
Further, Vasant has checked this and indicates the HW has an addtional
behavior that the manual does not yet describe. The AMDv2 table does not
have the sign extended behavior when attached to PASID 0, which may
explain why this has gone unnoticed.
The iommu domain geometry does not directly support sign extended page
tables. The driver should report only one of the lower/upper spaces. Solve
this by removing the top VA bit from the geometry to use only the lower
space.
This will also make the iommu_domain work consistently on all PASID 0 and
PASID != 1.
Adjust dma_max_address() to remove the top VA bit. It now returns:
5 Level:
Before 0x1ffffffffffffff
After 0x0ffffffffffffff
4 Level:
Before 0xffffffffffff
After 0x7fffffffffff
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: 788838ebe8a4 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://patch.msgid.link/20250709111339.25360-2-fourier.thomas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for
phystats") increased the skb size when aggregation is enabled but decreased
it for the aggregation disabled case.
As a result, if a frame near the maximum size is received,
rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the
driver starts to malfunction and no further communication is possible.
Restore the skb size in the aggregation disabled case.
Fixes: 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats") Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250709121522.1992366-1-martin.kaistra@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_measure_rcv_mss() is used to update icsk->icsk_ack.rcv_mss
(tcpi_rcv_mss in tcp_info) and tp->scaling_ratio.
Calling it from tcp_data_queue_ofo() makes sure these
fields are updated, and permits a better tuning
of sk->sk_rcvbuf, in the case a new flow receives many ooo
packets.
Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling the kernel with LLVM, the following warning was issued:
drivers/xen/gntdev.c:991: warning: stack frame size (1160) exceeds
limit (1024) in function 'gntdev_ioctl'
The main reason is struct gntdev_copy_batch which is located on the
stack and has a size of nearly 1kb.
For performance reasons it shouldn't by just dynamically allocated
instead, so allocate a new instance when needed and instead of freeing
it put it into a list of free structs anchored in struct gntdev_priv.
Commit 21c167aa0ba9 ("net/sched: act_ctinfo: use percpu stats")
missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set
might be written (and read) locklessly.
Use atomic64_t for these three fields, I doubt act_ctinfo is used
heavily on big SMP hosts anyway.
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
netem_enqueue's duplication prevention logic breaks when a netem
resides in a qdisc tree with other netems - this can lead to a
soft lockup and OOM loop in netem_dequeue, as seen in [1].
Ensure that a duplicating netem cannot exist in a tree with other
netems.
Previous approaches suggested in discussions in chronological order:
1) Track duplication status or ttl in the sk_buff struct. Considered
too specific a use case to extend such a struct, though this would
be a resilient fix and address other previous and potential future
DOS bugs like the one described in loopy fun [2].
2) Restrict netem_enqueue recursion depth like in act_mirred with a
per cpu variable. However, netem_dequeue can call enqueue on its
child, and the depth restriction could be bypassed if the child is a
netem.
3) Use the same approach as in 2, but add metadata in netem_skb_cb
to handle the netem_dequeue case and track a packet's involvement
in duplication. This is an overly complex approach, and Jamal
notes that the skb cb can be overwritten to circumvent this
safeguard.
4) Prevent the addition of a netem to a qdisc tree if its ancestral
path contains a netem. However, filters and actions can cause a
packet to change paths when re-enqueued to the root from netem
duplication, leading us to the current solution: prevent a
duplicating netem from inhabiting the same tree as other netems.
Remove the declaration of 'err' inside the 'if (timetravel)' block,
as it would otherwise be unavailable outside that block, potentially
leading to uml_rtc_start() returning an uninitialized value.
It's needed to check the return value of lockdep_commit_lock_is_held(),
otherwise there's no point in this assertion as it doesn't print any
debug information on itself.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: b04df3da1b5c ("netfilter: nf_tables: do not defer rule destruction via call_rcu") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This practically reverts commit 28339b21a365 ("netfilter: nf_tables: do
not send complete notification of deletions"): The feature was never
effective, due to prior modification of 'event' variable the conditional
early return never happened.
User space also relies upon the current behaviour, so better reintroduce
the shortened deletion notifications once it is fixed.
Fixes: 28339b21a365 ("netfilter: nf_tables: do not send complete notification of deletions") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dietmar reported that commit 3840cbe24cf0 ("sched: psi: fix bogus
pressure spikes from aggregation race") caused a regression for him on
a high context switch rate benchmark (schbench) due to the now
repeating cpu_clock() calls.
In particular the problem is that get_recent_times() will extrapolate
the current state to 'now'. But if an update uses a timestamp from
before the start of the update, it is possible to get two reads
with inconsistent results. It is effectively back-dating an update.
(note that this all hard-relies on the clock being synchronized across
CPUs -- if this is not the case, all bets are off).
Combine this problem with the fact that there are per-group-per-cpu
seqcounts, the commit in question pushed the clock read into the group
iteration, causing tree-depth cpu_clock() calls. On architectures
where cpu_clock() has appreciable overhead, this hurts.
Instead move to a per-cpu seqcount, which allows us to have a single
clock read for all group updates, increasing internal consistency and
lowering update overhead. This comes at the cost of a longer update
side (proportional to the tree depth) which can cause the read side to
retry more often.
When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to
generate console output. That will continue to work even after
debug_cons_nputs() becomes unavailable so there's no need to
unregister the boot console.
Take the opportunity to remove a repeated MACH_IS_* test. Use the
actual .write method (instead of a wrapper) and test that pointer
instead. This means adding an unused parameter to debug_cons_nputs() for
consistency with the struct console API.
early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late,
head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol
depend on the latter, to obviate some ifdef conditionals.
Cc: Daniel Palmer <daniel@0x0f.com> Fixes: 077b33b9e283 ("m68k: mvme147: Reinstate early console") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/d1d4328e5aa9a87bd8352529ce62b767731c0530.1743467205.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The check that the new vector length we set was the expected one was typoed
to an assignment statement which for some reason the compilers didn't spot,
most likely due to the macros involved.
Fixes: a1d7111257cd ("selftests: arm64: More comprehensively test the SVE ptrace interface") Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Dev Jain <dev.jain@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-1-998fcfa6f240@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the new coming segment covers more than one skbs in the ofo queue,
and which seq is equal to rcv_nxt, then the sequence range
that is duplicated will be sent as DUP SACK, the detail as below,
in step6, the {501,2001} range is clearly including too much
DUP SACK range, in violation of RFC 2883 rules.
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit().
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Fixes: 5118935b1bc2 ("ath11k: dump SRNG stats during FW assert") Link: https://patch.msgid.link/20250612084551.702803-1-senozhatsky@chromium.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
I tried to fix the stack usage in this function a couple of years ago,
but there is still a problem with the latest gcc versions in some
configurations:
net/caif/cfctrl.c:553:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reduce this once again, with a separate cfctrl_link_setup() function that
holds the bulk of all the local variables. It also turns out that the
param[] array that takes up a large portion of the stack is write-only
and can be left out here.
In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8efd ("selftests/bpf: Add sockmap test for redirecting partial skb data") Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
We observed an issue from the latest selftest: sockmap_redir where
sk_psock(psock->sk) != psock in the backlog. The root cause is the special
behavior in sockmap_redir - it frequently performs map_update() and
map_delete() on the same socket. During map_update(), we create a new
psock and during map_delete(), we eventually free the psock via rcu_work
in sk_psock_drop(). However, pending workqueues might still exist and not
be processed yet. If users immediately perform another map_update(), a new
psock will be allocated for the same sk, resulting in two psocks pointing
to the same sk.
When the pending workqueue is later triggered, it uses the old psock to
access sk for I/O operations, which is incorrect.
Timing Diagram:
cpu0 cpu1
map_update(sk):
sk->psock = psock1
psock1->sk = sk
map_delete(sk):
rcu_work_free(psock1)
map_update(sk):
sk->psock = psock2
psock2->sk = sk
workqueue:
wakeup with psock1, but the sk of psock1
doesn't belong to psock1
rcu_handler:
clean psock1
free(psock1)
Previously, we used reference counting to address the concurrency issue
between backlog and sock_map_close(). This logic remains necessary as it
prevents the sk from being freed while processing the backlog. But this
patch prevents pending backlogs from using a psock after it has been
stopped.
Note: We cannot call cancel_delayed_work_sync() in map_delete() since this
might be invoked in BPF context by BPF helper, and the function may sleep.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20250609025908.79331-1-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com> Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name.
The reference manual for the i.MX8MN states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
When error is injected with the ERR_FORCE register, then this register
is not auto cleared on clearing the ERR_STATUS register. This causes
repeated interrupts on error injection. To fix, set the ERR_FORCE to
zero along with clearing the ERR_STATUS register after handling error.
This commit fixes a typo introduced in commit ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
projects / thirdparty / kernel / stable.git / log
