The IRQ numbers created through irq_create_mapping() are only assigned
to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs
between their creation and their assignment (for instance during the
request_threaded_irq() step), we enter the error path and fail to
release the newly created virtual IRQs because they aren't yet assigned
to ptpmsg_irq[n].num.
Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry
with what's released by ksz_ptp_msg_irq_free().
In the error path, move the irq_dispose_mapping to the out_ptp_msg label
so it will be called only on created IRQs.
If a port interrupt setup fails after at least one port has already been
successfully initialized, the gotos miss some resource releasing:
- the already initialized PTP IRQs aren't released
- the already initialized port IRQs aren't released if the failure
occurs in ksz_pirq_setup().
Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label.
Behind this label, use the reverse loop to release all IRQ resources
for all initialized ports.
Jump in the middle of the reverse loop if an error occurs in
ksz_ptp_irq_setup() to only release the port IRQ of the current
iteration.
Cc: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-4-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If something goes wrong at setup, ksz_irq_free() can be called on
uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It
leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path
to iterate only over the fully initialized ports.
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, during the PTP IRQ setup,
we verify that its returned value isn't negative.
Fix the irq_find_mapping() check to enter the error path when 0 is
returned. Return -EINVAL in such case.
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, on each
irq_find_mapping() call, we verify that the returned value isn't
negative.
Fix the irq_find_mapping() checks to enter error paths when 0 is
returned. Return -EINVAL in such cases.
CC: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-1-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[WHY]
When monitor is still booting EDID read can fail while DPCD read
is successful. In this case no EDID data will be returned, and this
could happen for a while.
[HOW]
Increase number of attempts to read EDID in dm_helpers_read_local_edid()
to 25.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a76d6f2c76c3abac519ba753e2723e6ffe8e461c) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[WHY]
When a laptop lid is closed the connector is disabled but userspace
can still try to change brightness. This doesn't work because the
panel is turned off. It will eventually time out, but there is a lot
of stutter along the way.
[How]
Iterate all connectors to check whether the matching one for the backlight
index is enabled.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eeab30323d1174a4cc022e769d248fe8241304) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[WHAT]
IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic
fails with NULL pointer dereference. This can be reproduced with
both an eDP panel and a DP monitors connected.
Ensure the userq TLB flush is emitted only after
the VM update finishes and the PT BOs have been
annotated with bookkeeping fences.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3854e04b708d73276c4488231a8bd66d30b4671) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 16b7e65d299d ("drm/xe/guc: Track FAST_REQ H2Gs to report where errors came from") Tested-by: Sagar Ghuge <sagar.ghuge@intel.com> Cc: stable@vger.kernel.org # v6.17+ Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patch.msgid.link/20251118-fix-debug-guc-v1-1-9f780c6bedf8@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The selective fetch code doesn't handle asycn flips correctly.
There is a nonsense check for async flips in
intel_psr2_sel_fetch_config_valid() but that only gets called
for modesets/fastsets and thus does nothing for async flips.
Currently intel_async_flip_check_hw() is very unhappy as the
selective fetch code pulls in planes that are not even async
flips capable.
Reject async flips when selective fetch is enabled, until
someone fixes this properly (ie. disable selective fetch while
async flips are being issued).
Make sure to drop the references taken to the vtg devices by
of_find_device_by_node() when looking up their driver data during
component probe.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces:
- EVK-M101 current sensors
- EVK-M101 I2C
- EVK-M101 UART
- EVK-M101 port D
Only the third USB interface is a UART. This change lets ftdi_sio probe
the VID/PID and registers only interface #3 as a TTY, leaving the rest
available for other drivers.
[1]
usb 5-1.3: new high-speed USB device number 11 using xhci_hcd
usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: EVK-M101
usb 5-1.3: Manufacturer: u-blox AG
When DbC is disconnected then xhci_dbc_tty_unregister_device()
is called. However if there is any user space process blocked
on write to DbC terminal device then it will never be signalled
and thus stay blocked indifinitely.
This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device().
The tty_vhangup() wakes up any blocked writers and causes subsequent
write attempts to DbC terminal device to fail.
Data read from a DbC device may be corrupted due to a race between
ongoing write and write request completion handler both queuing new
transfer blocks (TRBs) if there are remining data in the kfifo.
TRBs may be in incorrct order compared to the data in the kfifo.
Driver fails to keep lock between reading data from kfifo into a
dbc request buffer, and queuing the request to the transfer ring.
This allows completed request to re-queue itself in the middle of
an ongoing transfer loop, forcing itself between a kfifo read and
request TRB write of another request
In the above scenario a kfifo containing "12345678" would read "1234" to
req1 and "5678" to req2, but req2 is queued before req1 leading to
data being transmitted as "56781234"
Solve this by adding a flag that prevents starting a new tx if we
are already mid dbc_start_tx() during the unlocked part.
The already running dbc_do_start_tx() will make sure the newly completed
request gets re-queued as it is added to the request write_pool while
holding the lock.
A usb device caught behind a link in ss.Inactive error state needs to
be reset to recover. A VDEV_PORT_ERROR flag is used to track this state,
preventing new transfers from being queued until error is cleared.
This flag may be left uncleared if link goes to error state between two
resets, and print the following message:
"xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive"
Fix setting and clearing the flag.
The flag is cleared after hub driver has successfully reset the device
when hcd->reset_device is called. xhci-hcd issues an internal "reset
device" command in this callback, and clear all flags once the command
completes successfully.
This command may complete with a context state error if slot was recently
reset and is already in the defauilt state. This is treated as a success
but flag was left uncleared.
The link state field is also unreliable if port is currently in reset,
so don't set the flag in active reset cases.
Also clear the flag immediately when link is no longer in ss.Inactive
state and port event handler detects a completed reset.
This issue was discovered while debugging kernel bugzilla issue 220491.
It is likely one small part of the problem, causing some of the failures,
but root cause remains unknown
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue.
The PCI device IDs were organised based on the Intel
architecture generation in most cases, but not with every
ID. That left the device ID table with no real order.
Sorting the table based on the device ID.
When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.
The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.
This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().
The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().
The ucsi_psy_get_current_max function defaults to 0.1A when it is not
clear how much current the partner device can support. But this does
not check the port is connected, and will report 0.1A max current when
nothing is connected. Update ucsi_psy_get_current_max to report 0A when
there is no connection.
Fixes: af833e7f7db3 ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default") Cc: stable@vger.kernel.org Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Kenneth R. Crudup <kenny@panix.com>
Rule: add Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Discovered by Atuin - Automated Vulnerability Discovery Engine.
new_pba comes from the status packet returned after each write.
A bogus device could report values beyond the block count derived
from info->capacity, letting the driver walk off the end of
pba_to_lba[] and corrupt heap memory.
Reject PBAs that exceed the computed block count and fail the
transfer so we avoid touching out-of-range mapping entries.
A report from Oleg Smirnov indicates that the unusual_devs quirks
entry for the Novatek camera does not need to override the subclass
and protocol parameters:
[3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00
[3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3266355.333043] usb 1-3: Product: YICARCAM
[3266355.333045] usb 1-3: Manufacturer: XIAO-YI
[3266355.333047] usb 1-3: SerialNumber: 966110000000100
[3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected
[3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000
[3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1)
Please send a copy of this message to
<linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>
The overrides are harmless but they do provoke the driver into logging
this annoying message. Update the entry to remove the unneeded entries.
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages.
Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable <stable@kernel.org> Signed-off-by: Desnes Nunes <desnesn@redhat.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue occurs because usbhs_sys_function_pullup(), which accesses the IP
registers, is executed after the USBHS clocks have been disabled. The
problem is reproducible on the Renesas RZ/G3S SoC starting with the
addition of module stop in the clock enable/disable APIs. With module stop
functionality enabled, a bus error is expected if a master accesses a
module whose clock has been stopped and module stop activated.
The existing code did not handle the failure case of usb_ep_queue in the
command path, potentially leading to memory leaks.
Improve error handling to free all allocated resources on usb_ep_queue
failure. This patch continues to use goto logic for error handling, as the
existing error handling is complex and not easily adaptable to auto-cleanup
helpers.
The driver uses pcim_enable_device() to enable the PCI device,
the device will be automatically disabled on driver detach through
the managed device framework. The manual pci_disable_device() calls
in the error paths are therefore redundant and should be removed.
Found via static anlaysis and this is similar to commit 99ca0b57e49f
("thermal: intel: int340x: processor: Fix warning during module unload").
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures.
Fixes: 723de0f9171e ("staging: most: remove device from interface structure") Fixes: 4b1270902609 ("most: usb: Fix use-after-free in hdm_disconnect") Fixes: a8cc9e5fcb0e ("most: usb: hdm_probe: Fix calling put_device() before device initialization") Cc: stable@vger.kernel.org Cc: Christian Gromm <christian.gromm@microchip.com> Cc: Victoria Votokina <Victoria.Votokina@kaspersky.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20251029093029.28922-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst:
"In some circumstances dma_map_single(), ...
will fail to create a mapping. A driver can check for these errors
by testing the returned DMA address with dma_mapping_error()."
Found via static analysis and this is similar to commit fa0308134d26
("ALSA: memalloc: prefer dma_mapping_error() over explicit address checking")
Depmod fails for a kernel made with:
make allnoconfig
echo -e "CONFIG_MODULES=y\nCONFIG_SERIAL_8250=m\nCONFIG_SERIAL_8250_EXTENDED=y\nCONFIG_SERIAL_8250_RSA=y" >> .config
make olddefconfig
...due to a dependency loop:
depmod: ERROR: Cycle detected: 8250 -> 8250_base -> 8250
depmod: ERROR: Found 2 modules in dependency cycles!
This is caused by the move of 8250 RSA code from 8250_port.c (in
8250_base.ko) into 8250_rsa.c (in 8250.ko) by the commit 5a128fb475fb
("serial: 8250: move RSA functions to 8250_rsa.c"). The commit b20d6576cdb3 ("serial: 8250: export RSA functions") tried to fix a
missing symbol issue with EXPORTs but those then cause this dependency
cycle.
Break dependency loop by moving 8250_rsa.o from 8250.ko to 8250_base.ko
and by passing univ8250_port_base_ops to univ8250_rsa_support() that
can make a local copy of it.
When __mptcp_retrans() kicks-in, it schedules one or more subflows for
retransmission, but such subflows could be actually left alone if there
is no more data to retransmit and/or in case of concurrent fallback.
Scheduled subflows could be processed much later in time, i.e. when new
data will be transmitted, leading to bad subflow selection.
Explicitly clear all scheduled subflows before leaving the
retransmission function.
Fixes: ee2708aedad0 ("mptcp: use get_retrans wrapper") Cc: stable@vger.kernel.org Reported-by: Filip Pokryvka <fpokryvk@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251125-net-mptcp-clear-sched-rtx-v1-1-1cea4ad2165f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 27e8fe0da3b7 ("mmc: sdhci-of-dwcmshc: Prevent stale command
interrupt handling") clears pending interrupts when resetting
host->pending_reset to ensure no pending stale interrupts after
sdhci_threaded_irq restores interrupts. But this fix is only added for
th1520 platforms, in fact per my test, this issue exists on all
dwcmshc users, such as cv1800b, sg2002, and synaptics platforms.
So promote the above reset handling from th1520 to ip level. And keep
reset handling on rk, sg2042 and bf3 as is, until it's confirmed that
the same issue exists on these platforms too.
Fixes: 017199c2849c ("mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When allocating hugetlb folios for memfd, three initialization steps are
missing:
1. Folios are not zeroed, leading to kernel memory disclosure to userspace
2. Folios are not marked uptodate before adding to page cache
3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache()
The memfd allocation path bypasses the normal page fault handler
(hugetlb_no_page) which would handle all of these initialization steps.
This is problematic especially for udmabuf use cases where folios are
pinned and directly accessed by userspace via DMA.
Fix by matching the initialization pattern used in hugetlb_no_page():
- Zero the folio using folio_zero_user() which is optimized for huge pages
- Mark it uptodate with folio_mark_uptodate()
- Take hugetlb_fault_mutex before adding to page cache to prevent races
The folio_zero_user() change also fixes a potential security issue where
uninitialized kernel memory could be disclosed to userspace through read()
or mmap() operations on the memfd.
Link: https://lkml.kernel.org/r/20251112145034.2320452-1-kartikey406@gmail.com Fixes: 89c1905d9c14 ("mm/gup: introduce memfd_pin_folios() for pinning memfd folios") Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reported-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/20251112031631.2315651-1-kartikey406@gmail.com/ Closes: https://syzkaller.appspot.com/bug?extid=f64019ba229e3a5c411b Suggested-by: Oscar Salvador <osalvador@suse.de> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> (v2) Cc: Christoph Hellwig <hch@lst.de> (v6) Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c010d47f107f ("mm: thp: split huge page to any lower order pages")
introduced an early check on the folio's order via mapping->flags before
proceeding with the split work.
This check introduced a bug: for shmem folios in the swap cache and
truncated folios, the mapping pointer can be NULL. Accessing
mapping->flags in this state leads directly to a NULL pointer dereference.
This commit fixes the issue by moving the check for mapping != NULL before
any attempt to access mapping->flags.
Link: https://lkml.kernel.org/r/20251119235302.24773-1-richard.weiyang@gmail.com Fixes: c010d47f107f ("mm: thp: split huge page to any lower order pages") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the requirements for counted_by annotations is that the counter
member must be initialized before the first reference to the
flexible-array member.
Move the vevent->data_len = data_len; initialization to before the
first access to flexible array vevent->event_data.
Link: https://patch.msgid.link/r/aRL7ZFFqM5bRTd2D@kspp Cc: stable@vger.kernel.org Fixes: e8e1ef9b77a7 ("iommufd/viommu: Add iommufd_viommu_report_event helper") Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915cd ("firmware: stratix10-svc: extend svc to support new RSU features") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com> Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When support for vectored registered buffers was added, the import
itself is using 'req' rather than the notification io_kiocb, sr->notif.
For non-vectored imports, sr->notif is correctly used. This is important
as the lifetime of the two may be different. Use the correct io_kiocb
for the vectored buffer import.
Cc: stable@vger.kernel.org Fixes: 23371eac7d9a ("io_uring/net: implement vectored reg bufs for zctx") Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-463332873@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There have been reports that RTL8127 hangs on suspend and shutdown,
partially disappearing from lspci until power-cycling.
According to Realtek disabling PLL's when switching to D3 should be
avoided on that chip version. Fix this by aligning disabling PLL's
with the vendor drivers, what in addition results in PLL's not being
disabled when switching to D3hot on other chip versions.
Fixes: f24f7b2f3af9 ("r8169: add support for RTL8127A") Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/d7faae7e-66bc-404a-a432-3a496600575f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until
late_initcall_sync") kept power-domains on longer during boot which is
causing some GPU related tests to fail on Tegra234. While this is being
investigated, add the flag GENPD_FLAG_NO_STAY_ON for Tegra devices to
restore the previous behaviour to fix this.
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function qcom_slim_ngd_notify_slaves() calls of_slim_get_device() which
internally uses device_find_child() to obtain a device reference.
According to the device_find_child() documentation,
the caller must drop the reference with put_device() after use.
Found via static analysis and this is similar to commit 4e65bda8273c
("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().
This fixes the following memory leak reported by kmemleak:
Fixes: f2aee329a68f ("cifs: set domainName when a domain-key is used in multiuser") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Reviewed-by: David Howells <dhowells@redhat.com> Cc: Jay Shin <jaeshin@redhat.com> Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
The sysdev_is_parent check was being used to infer PCI devices that have
the DMA mask set from the PCI capabilities, but sysdev_is_parent is also
used for non-PCI ACPI devices in which case the DMA mask would be the
bus default or as set by the _DMA method.
Without this fix the DMA mask would default to 32-bits and so allocation
would fail if there was no DRAM below 4GB.
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Mark the interrupt as IRQF_SHARED to permit multiple counter channels to
share the same TCB IRQ line.
Each Timer/Counter Block (TCB) instance shares a single IRQ line among its
three internal channels. When multiple counter channels (e.g., counter@0
and counter@1) within the same TCB are enabled, the second call to
devm_request_irq() fails because the IRQ line is already requested by the
first channel.
The crash in process_v2_sparse_read() for fscrypt-encrypted directories
has been reported. Issue takes place for Ceph msgr2 protocol in secure
mode. It can be reproduced by the steps:
sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure
[ 417.133921] Second to last potentially related work creation:
[ 417.134183] kasan_save_stack+0x26/0x60
[ 417.134362] kasan_record_aux_stack+0xae/0xd0
[ 417.134566] __call_rcu_common+0xcd/0x14b0
[ 417.134782] call_rcu+0x31/0x50
[ 417.134929] put_task_struct_rcu_user+0x58/0xb0
[ 417.135143] finish_task_switch.isra.0+0x5d3/0x830
[ 417.135366] __schedule+0xd30/0x5100
[ 417.135534] schedule_idle+0x5a/0x90
[ 417.135712] do_idle+0x25f/0x410
[ 417.135871] cpu_startup_entry+0x53/0x70
[ 417.136053] start_secondary+0x216/0x2c0
[ 417.136233] common_startup_64+0x13e/0x141
[ 417.136894] The buggy address belongs to the object at ffff888124870000
which belongs to the cache task_struct of size 10504
[ 417.138122] The buggy address is located 52 bytes inside of
freed 10504-byte region [ffff888124870000, ffff888124872908)
[ 417.145859] Memory state around the buggy address:
[ 417.146094] ffff88812486ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[ 417.146439] ffff88812486ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[ 417.146791] >ffff888124870000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.147145] ^
[ 417.147387] ffff888124870080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.147751] ffff888124870100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.148123]
==================================================================
First of all, we have warning in get_bvec_at() because
cursor->total_resid contains zero value. And, finally,
we have crash in ceph_msg_data_advance() because
cursor->data is NULL. It means that get_bvec_at()
receives not initialized ceph_msg_data_cursor structure
because data is NULL and total_resid contains zero.
Moreover, we don't have likewise issue for the case of
Ceph msgr1 protocol because ceph_msg_data_cursor_init()
has been called before reading sparse data.
This patch adds calling of ceph_msg_data_cursor_init()
in the beginning of process_v2_sparse_read() with
the goal to guarantee that logic of reading sparse data
works correctly for the case of Ceph msgr2 protocol.
Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
to be reset. If we ever reach the condition of handling more than
`SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop body.
This may, among other issues, cause us to never `netif_wake_queue()` again
after a transmission interrupt.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Cc: stable@vger.kernel.org Co-developed-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patch.msgid.link/20251116-sun4i-fix-loop-v1-1-3d76d3f81950@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading the interrupt register `SJA1000_IR` causes all of its bits to be
reset. If we ever reach the condition of handling more than
`SJA1000_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop
body.
This may, among other issues, cause us to never `netif_wake_queue()`
again after a transmission interrupt.
Fixes: 429da1cc841b ("can: Driver for the SJA1000 CAN controller") Cc: stable@vger.kernel.org Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20251115153437.11419-1-tmuehlbacher@posteo.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to:
usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM)
That function can return NULL in some cases. Even when it returns
NULL, though, we still go on to call btusb_mtk_claim_iso_intf().
As of commit e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for
usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf()
when `btmtk_data->isopkt_intf` is NULL will cause a crash because
we'll end up passing a bad pointer to device_lock(). Prior to that
commit we'd pass the NULL pointer directly to
usb_driver_claim_interface() which would detect it and return an
error, which was handled.
Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check
at the start of the function. This makes the code handle a NULL
`btmtk_data->isopkt_intf` the same way it did before the problematic
commit (just with a slight change to the error message printed).
Reported-by: IncogCyberpunk <incogcyberpunk@proton.me> Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info Fixes: e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()") Cc: stable@vger.kernel.org Tested-by: IncogCyberpunk <incogcyberpunk@proton.me> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.
The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().
In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.
This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.
Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251120120657.2462194-1-hanguidong02@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
According to the board design, set SEL to high means flipped
connection (TX2/RX2). And the TCPM will output logical 1 if it needs
flipped connection. So switch to active high for select-gpios.
The EN pin on mux chip is low active, so switch to active low for
enable-gpios too.
Fixes: b237975b2cd5 ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes") Cc: stable@vger.kernel.org Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Integrated amplifier LEAK Stereo 230 by IAG Limited has built-in
ESS9038Q2M DAC served by XMOS controller. It supports both DSD Native
and DSD-over-PCM (DoP) operational modes. But it doesn't work properly
by default and tries DSD-to-PCM conversion. USB quirks below allow it
to operate as designed.
Add DSD_RAW quirk flag for IAG Limited devices (vendor ID 0x2622)
Add DSD format quirk for LEAK Stereo 230 (USB ID 0x2622:0x0061)
When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel
calls vm_ops->close on each portion. For trace buffer mappings, this
results in ring_buffer_unmap() being called multiple times while
ring_buffer_map() was only called once.
This causes ring_buffer_unmap() to return -ENODEV on subsequent calls
because user_mapped is already 0, triggering a WARN_ON.
Trace buffer mappings cannot support partial mappings because the ring
buffer structure requires the complete buffer including the meta page.
Fix this by adding a may_split callback that returns -EINVAL to prevent
VMA splits entirely.
When discarding descriptors with IN_ORDER, we should rewind
next_avail_head otherwise it would run out of sync with
last_avail_idx. This would cause driver to report
"id X is not a head".
Fixing this by returning the number of descriptors that is used for
each buffer via vhost_get_vq_desc_n() so caller can use the value
while discarding descriptors.
Fixes: 67a873df0c41 ("vhost: basic in order support") Cc: stable@vger.kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20251120022950.10117-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP
GSO tunneling.") inadvertently altered checksum offload behavior
for guests not using UDP GSO tunneling.
Before, tun_put_user called tun_vnet_hdr_from_skb, which passed
has_data_valid = true to virtio_net_hdr_from_skb.
After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead,
which passes has_data_valid = false into both call sites.
This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID
for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result,
guests are forced to recalculate checksums unnecessarily.
Restore the previous behavior by ensuring has_data_valid = true is
passed in the !tnl_gso_type case, but only from tun side, as
virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver,
which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx.
cc: stable@vger.kernel.org Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") Signed-off-by: Jon Kohler <jon@nutanix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries. Therefore allocate an array
for uniquification instead of placing too an small array on the stack.
Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init") Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable@vger.kernel.org # v6.17+: 9f048fa48740: MIPS: mm: Prevent a TLB shutdown on initial uniquification Cc: stable@vger.kernel.org # v6.17+ Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Klara Modin <klarasmodin@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init") Cc: stable@vger.kernel.org Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a special case to double the SPI offload trigger rate when all
channels of a single-ended chip are enabled in a buffered read.
The single-ended chips in the AD738x family can only do simultaneous
sampling of half their channels and have a multiplexer to allow reading
the other half. To comply with the IIO definition of sampling_frequency,
we need to trigger twice as often when the sequencer is enabled to so
that both banks can be read in a single sample period.
Fixes: bbeaec81a03e ("iio: ad7380: add support for SPI offload") Signed-off-by: David Lechner <dlechner@baylibre.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use correct argument to iio_str_to_fixpoint() to parse 3 decimal places.
iio_str_to_fixpoint() has a bit of an unintuitive API where the
fract_mult parameter is the multiplier of the first decimal place as if
it was already an integer. So to get 3 decimal places, fract_mult must
be 100 rather than 1000.
Fixes: 96ccdbc07a74 ("staging:iio:adc:ad7280a: Standardize extended ABI naming") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix temperature channel not working due to gain and offset not being
initialized. For channels other than the voltage ones calibration is
skipped (which is OK). However that results in the calibration register
values tracked in st->channels[i].cfg all being zero. These zeros are
later written to hardware before a measurement is made which caused the
raw temperature readings to be always 8388608 (0x800000).
To fix it, we just make sure the gain and offset values are set to the
default values and still return early without doing an internal
calibration.
While here, add a comment explaining why we don't bother calibrating
the temperature channel.
Previously, the driver always used the amount of precision bits of
differential input channels to provide the scale to mV. Though,
differential and common-mode voltage channels have different amount of
precision bits and the correct number of precision bits must be considered
to get to a proper mV scale factor for each one. Use channel specific
number of precision bits to provide the correct scale value for each
channel.
There is an race-condition where device is not full working after SW reset.
Therefore it's necessary to wait some time after reset and verify shadow
registers values by reading and comparing the values before/after reset.
This mechanism is described in datasheet at least from revision D.
Fixes: 12ed27863ea3 ("iio: accel: Add driver support for ADXL355") Signed-off-by: Valek Andrej <andrej.v@skyrain.eu> Signed-off-by: Kessler Markus <markus.kessler@hilti.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:
Unable to handle kernel NULL pointer dereference at virtual
address 00000001 when read
PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4
This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.
Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not.
Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initially st,adc-alt-channel property was defined as an enum in the DFSDM
binding. The DFSDM binding has been changed to use the new IIO backend
framework, along with the adoption of IIO generic channels.
In this new binding st,adc-alt-channel is defined as a boolean property,
but it is still handled has an enum in DFSDM driver.
Fix st,adc-alt-channel property handling in DFSDM driver.
If an error occurs after a successful mfd_add_devices() call, it should be
undone by a corresponding mfd_remove_devices() call, as already done in the
remove function.
Correction of meas_time_us initialization based on an observation and
partial patch by David Lechner.
The constant part of the measurement time (as described in the
datasheet and implemented in the BM(P/E)2 Sensor API) was apparently
forgotten (it was already correctly applied for the BMP380) and is now
used.
There was also another thinko in bmp280_wait_conv:
data->oversampling_humid can actually have a value of 0 (for an
oversampling_ratio of 1), so it can not be used to detect the presence
of the humidity measurement capability. Use
data->chip_info->oversampling_humid_avail instead, which is NULL for
chips that cannot measure humidity and therefore must skip that part
of the calculation.
Closes: https://lore.kernel.org/linux-iio/875xgfg0wz.fsf@Gerda.invalid/ Fixes: 26ccfaa9ddaa ("iio: pressure: bmp280: Use sleep and forced mode for oneshot captures") Suggested-by: David Lechner <dlechner@baylibre.com> Tested-by: Achim Gratz <Achim.Gratz@Stromeko.DE> Signed-off-by: Achim Gratz <Achim.Gratz@Stromeko.DE> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `decimator` and `batch` fields of struct st_lsm6dsx_settings
are arrays indexed by sensor type, not by sensor hardware
identifier; moreover, the `batch` field is only used for the
accelerometer and gyroscope.
Change the array size for `decimator` from ST_LSM6DSX_MAX_ID to
ST_LSM6DSX_ID_MAX, and change the array size for `batch` from
ST_LSM6DSX_MAX_ID to 2; move the enum st_lsm6dsx_sensor_id
definition so that the ST_LSM6DSX_ID_MAX value is usable within
the struct st_lsm6dsx_settings definition.
Fixes: 801a6e0af0c6c ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the ABI the units after application of scale and offset are
milli degree celsius for temperature thresholds and milli percent for
relative humidity thresholds. Currently the resulting units are degree
celsius for temperature thresholds and hysteresis and percent for relative
humidity thresholds and hysteresis. Change scale factor to fix this issue.
According to the ABI the units after application of scale and offset are
milli degrees for temperature measurements and milli percent for relative
humidity measurements. Currently the resulting units are degree celsius for
temperature measurements and percent for relative humidity measurements.
Change scale factor to fix this issue.
Fixes: c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors") Reported-by: Chris Lesiak <chris.lesiak@licorbio.com> Suggested-by: Chris Lesiak <chris.lesiak@licorbio.com> Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new buffer accessor .get_dma_dev() in order to get the
struct device responsible for actually providing the dma channel. We
cannot assume that we can use the parent of the IIO device for mapping
the DMA buffer. This becomes important on systems (like the Xilinx/AMD
zynqMP Ultrascale) where memory (or part of it) is mapped above the
32 bit range. On such systems and given that a device by default has
a dma mask of 32 bits we would then need to rely on bounce buffers (to
swiotlb) for mapping memory above the dma mask limit.
In the process, add an iio_buffer_get_dma_dev() helper function to get
the proper DMA device.
Cc: stable@vger.kernel.org Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wire up the .get_dma_dev() callback to use the DMA buffer infrastructure's
implementation. This ensures that DMABUF operations use the correct DMA
device for mapping, which is essential for proper operation on systems
where memory is mapped above the 32-bit range.
Without this callback, the core would fall back to using the IIO device's
parent, which may not have the appropriate DMA mask configuration for
high memory access.
Fixes: 7a86d469983a ("iio: buffer-dmaengine: Support new DMABUF based userspace API") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the .get_dma_dev() callback for DMA buffers by returning the
device that owns the DMA channel. This allows the core DMABUF
infrastructure to properly map DMA buffers using the correct device,
avoiding the need for bounce buffers on systems where memory is mapped
above the 32-bit range.
The function returns the DMA queue's device, which is the actual device
responsible for DMA operations in buffer-dma implementations.
Cc: stable@vger.kernel.org Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we store initial stacktrace entry twice for non-HW ot_regs, which
means callers that fail perf_hw_regs(regs) condition in perf_callchain_kernel.
When perf_callchain_kernel calls unwind_start with first_frame, AFAICS
we do not skip regs->ip, but it's added as part of the unwind process.
Hence reverting the extra perf_callchain_store for non-hw regs leg.
I was not able to bisect this, so I'm not really sure why this was needed
in v5.2 and why it's not working anymore, but I could see double entries
as far as v5.10.
I did the test for both ORC and framepointer unwind with and without the
this fix and except for the initial entry the stacktraces are the same.
Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20251104215405.168643-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This results in a blank screen on the HDMI port on some systems.
Revert for now so as not to regress 6.18, can be addressed
in 6.19 once the issue is root caused.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652 Cc: Sunpeng.Li@amd.com Cc: ivan.lipski@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0e9de7a81503cdde37fb2d37f1d102f9e0f38fb) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If kobject_create_and_add() fails on the first iteration, then the error
code is set to -ENOMEM which is correct. But if it fails in subsequent
iterations then "ret" is zero, which means success, but it should be
-ENOMEM.
Set the error code to -ENOMEM correctly.
Fixes: 7b5ab04f035f ("timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Malaya Kumar Rout <mrout@redhat.com> Link: https://patch.msgid.link/aSW1R8q5zoY_DgQE@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it
to cell->anonymous_key. Without this change, the error check may return a
false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter
with afs_alloc_anon_key() will usually be from (auto)mount, for which all
subsequent operations must wait - apart from other (auto)mounts. Once the
call->anonymous_key is allocated, all further calls to afs_request_key()
will skip the call to afs_alloc_anon_key() for that cell.
Fixes: d27c71257825 ("afs: Fix delayed allocation of a cell's anonymous key") Reported-by: Paulo Alcantra <pc@manguebit.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On BCM6358 (and also observed on BCM6368) the controller appears to
only generate as many SPI clocks as bytes that have been written into
the TX FIFO. For RX-only transfers the driver programs the transfer
length in SPI_MSG_CTL but does not write anything into the FIFO, so
chip select is deasserted early and the RX transfer segment is never
fully clocked in.
A concrete failing case is a three-transfer MAC address read from
SPI-NOR:
- TX 0x03 (read command)
- TX 3-byte address
- RX 6 bytes (MAC)
In contrast, a two-transfer JEDEC-ID read (0x9f + 6-byte RX) works
because the driver uses prepend_len and writes dummy bytes into the
TX FIFO for the RX part.
Fix this by writing 0xff dummy bytes into the TX FIFO for RX-only
segments so that the number of bytes written to the FIFO matches the
total message length seen by the controller.
Propagate fwnode of the ACPI device to the SPI controller Linux device.
Currently only OF case propagates fwnode to the controller.
While at it, replace several calls to dev_fwnode() with a single one
cached in a local variable, and unify checks for fwnode type by using
is_*_node() APIs.
Fixes: 55ab8487e01d ("spi: spi-nxp-fspi: Add ACPI support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://patch.msgid.link/20251126202501.2319679-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add OCT-DTR mode support in default, since flexspi do not supports
swapping bytes on a 16 bit boundary in OCT-DTR mode, so mark swap16
as false.
lx2160a do not support DQS, so add a quirk to disable DTR mode for this
platform.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-5-bb9fe2a01889@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 40ad64ac25bb ("spi: nxp-fspi: Propagate fwnode in ACPI case as well") Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value, potentially causing runtime PM operations
to fail silently after autosuspend configuration.
Check the return value of devm_pm_runtime_enable() and return on failure.
Fixes: 909fac05b926 ("spi: add support for Amlogic A1 SPI Flash Controller") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251124015852.937-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver runs also on Tegra SoCs without a Tegra20 APB DMA controller
(e.g. Tegra234).
Remove the Kconfig dependency on TEGRA20_APB_DMA; in addition, amend the
help text to reflect the fact that this driver works on SoCs different from
Tegra114.
Fixes: bb9667d8187b ("arm64: tegra: Add SPI device tree nodes for Tegra234") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Link: https://patch.msgid.link/20251126095027.4102004-1-flavra@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to [1], the C906 vector registers are 128 bits wide.
The 'thead,vlenb' property specifies the vector register length
in bytes, so its value must be set to 16.
As well as checking that the parent hasn't changed after getting the
lock we need to check that the dentry hasn't been unhashed.
Otherwise we might try to rename something that has been removed.
Reported-by: syzbot+bfc9a0ccf0de47d04e8c@syzkaller.appspotmail.com Fixes: d2c995581c7c ("ovl: Call ovl_create_temp() without lock held.") Signed-off-by: NeilBrown <neil@brown.name> Link: https://patch.msgid.link/176429295510.634289.1552337113663461690@noble.neil.brown.name Tested-by: syzbot+bfc9a0ccf0de47d04e8c@syzkaller.appspotmail.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead.
Fixes: 330e2c514823 ("afs: Fix dynamic lookup to fail on cell lookup failure") Reported-by: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/800328.1764325145@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "probe_setup_failed" label calls pm_runtime_disable(), but
pm_runtime_enable() was placed after a possible jump to this label.
When cqspi_setup_flash() fails, control jumps to the label without
pm_runtime_enable() being called, leading to unbalanced PM runtime
reference counting.
Move pm_runtime_enable() and associated calls above the first
possible branch to "probe_setup_failed" to ensure balanced
enable/disable calls across all error paths.
Fixes: 30dbc1c8d50f ("spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled") Signed-off-by: Anurag Dutta <a-dutta@ti.com> Link: https://patch.msgid.link/20251105161146.2019090-2-a-dutta@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix runtime PM usage count underflow caused by calling
pm_runtime_put_autosuspend() twice with only one corresponding
pm_runtime_get_noresume() call. This triggers the warning:
"Runtime PM usage count underflow!"
Remove the duplicate put call to balance the runtime PM reference
counting.
Fixes: 30dbc1c8d50f ("spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled") Signed-off-by: Anurag Dutta <a-dutta@ti.com> Link: https://patch.msgid.link/20251105161146.2019090-3-a-dutta@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
