Cached metrics data validity is 1ms on aldebaran. It's not reasonable
for any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The reason some high-resolution monitors fail to display properly
is that this platform does not support sufficiently high DPP and
DISP clock frequencies
[How]
Update DISP and DPP clocks from the smu clock table then DML can
filter these mode if not support.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Try to ensure poison creation handle is completed in time
to set device rma value.
Signed-off-by: Ce Sun <cesun102@amd.com> Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits.
The GuC load process will abort if certain status codes (which are
indicative of a fatal error) are reported. Otherwise, it keeps waiting
until the 'success' code is returned. New error codes have been added
in recent GuC releases, so add support for aborting on those as well.
v2: Shuffle HWCONFIG_START to the front of the switch to keep the
ordering as per the enum define for clarity (review feedback by
Jonathan). Also add a description for the basic 'invalid init data'
code which was missing.
[WHY]
In the worst case, AUX intra-hop done can take hundreds of milliseconds as
each retimer in a link might have to wait a full AUX_RD_INTERVAL to send
LT abort downstream.
[HOW]
Wait 300ms for each retimer in a link to allow time to propagate a LT abort
without infinitely waiting on intra-hop done.
For no-retimer case, keep the max duration at 10ms.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
If symclk RCO is enabled, stream encoder may not be receiving an ungated
clock by the time we attempt to set stream attributes when setting dpms
on. Since the clock is gated, register writes to the stream encoder fail.
[HOW]
Move set_stream_attribute call into enable_stream, just after the point
where symclk32_se is ungated.
Logically there is no need to set stream attributes as early as is
currently done in link_set_dpms_on, so this should have no impact beyond
the RCO fix.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Log an error when vcn sram load fails in indirect mode
and return the same error value.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
When transitioning between topologies such as multi-display to single
display ODM 2:1, pipes might not be freed before use.
[How]
In dc_commit_streams, commit an additional, minimal transition if
original transition is not seamless to ensure pipes are freed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
timing_adjust_pending is used to defer certain programming sequences
when OTG timing is about to be changed, like with VRR. Insufficient
checking for timing change in this case caused a regression which
reduces PSR Replay residency.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we are successful in using cpufreq min/max limits,
skip setting the raw MSR limits entirely.
This is necessary to avoid undoing any modification that
the cpufreq driver makes to our sysfs request.
eg. intel_pstate may take our request for a limit
that is valid according to HWP.CAP.MIN/MAX and clip
it to be within the range available in PLATFORM_INFO.
Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fopen_or_die() function was previously hardcoded
to open files in read-only mode ("r"), ignoring the
mode parameter passed to it. This patch corrects
fopen_or_die() to use the provided mode argument,
allowing for flexible file access as intended.
Additionally, the call to fopen_or_die() in
err_on_hypervisor() incorrectly used the mode
"ro", which is not a valid fopen mode. This is
fixed to use the correct "r" mode.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf_cookie can fail on perf_event_open(), when it runs after the task_work
selftest. The task_work test causes perf to lower
sysctl_perf_event_sample_rate, and bpf_cookie uses sample_freq,
which is validated against that sysctl. As a result,
perf_event_open() rejects the attr if the (now tighter) limit is
exceeded.
>From perf_event_open():
if (attr.freq) {
if (attr.sample_freq > sysctl_perf_event_sample_rate)
return -EINVAL;
} else {
if (attr.sample_period & (1ULL << 63))
return -EINVAL;
}
Switch bpf_cookie to use sample_period, which is not checked against
sysctl_perf_event_sample_rate.
Fix incorrect size parameter passed to cpuidle_state_write_file() in
cpuidle_state_disable().
The function was incorrectly using sizeof(disable) which returns the
size of the unsigned int variable (4 bytes) instead of the actual
length of the string stored in the 'value' buffer.
Since 'value' is populated with snprintf() to contain the string
representation of the disable value, we should use the length
returned by snprintf() to get the correct string length for
writing to the sysfs file.
This ensures the correct number of bytes is written to the cpuidle
state disable file in sysfs.
It turns out the second fan on the Dell Precision 490 does not
really support I8K_FAN_TURBO. Setting the fan state to 3 enables
automatic fan control, just like on the other two fans.
The reason why this was misinterpreted as turbo mode was that
the second fan normally spins faster in automatic mode than
in the previous fan states. Yet when in state 3, the fan speed
reacts to heat exposure, exposing the automatic mode setting.
Some motherboards require more time to acquire the ACPI mutex,
causing "Failed to acquire mutex" messages to appear in the kernel log.
Increase the timeout from 500ms to 800ms to accommodate these cases.
If uprobe handler changes instruction pointer we still execute single
step) or emulate the original instruction and increment the (new) ip
with its length.
This makes the new instruction pointer bogus and application will
likely crash on illegal instruction execution.
If user decided to take execution elsewhere, it makes little sense
to execute the original instruction, so let's skip it.
"""
A host requests an explicit persistent connection ... by specifying a
non-zero Keep Alive Timer value in the Connect command.
"""
As such if we are starting a persistent connection to a discovery
controller and the KATO is currently 0 we need to update KATO to a non
zero value to avoid continuous timeouts on the target.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In the __arch_prepare_bpf_trampoline() function, retval_off is only
meaningful when save_ret is true, so the current logic is correct.
However, in the original logic, retval_off is only initialized under
certain conditions; for example, in the fmod_ret logic, the compiler is
not aware that the flags of the fmod_ret program (prog) have set
BPF_TRAMP_F_CALL_ORIG, which results in an uninitialized symbol
compilation warning.
So initialize retval_off unconditionally to fix it.
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO.
Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
During normal operation the timers are reprogrammed including an
interrupt acknowledgement. This has no effect as the whole timer
is setup from scratch afterwards. Especially in an interrupt this
has already been done by rttm_timer_interrupt().
Change the behaviour as follows:
- Use rttm_disable_timer() during reprogramming
- Keep rttm_stop_timer() for all other use cases.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Stephen Howell <howels@allthatwemight.be> Tested-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20250804080328.2609287-4-markus.stockhausen@gmx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The OpenWrt distribution has switched from kernel longterm 6.6 to
6.12. Reports show that devices with the Realtek Otto switch platform
die during operation and are rebooted by the watchdog. Sorting out
other possible reasons the Otto timer is to blame. The platform
currently consists of 4 targets with different hardware revisions.
It is not 100% clear which devices and revisions are affected.
Analysis shows:
A more aggressive sched/deadline handling leads to more timer starts
with small intervals. This increases the bug chances. See
https://marc.info/?l=linux-kernel&m=175276556023276&w=2
Focusing on the real issue a hardware limitation on some devices was
found. There is a minimal chance that a timer ends without firing an
interrupt if it is reprogrammed within the 5us before its expiration
time. Work around this issue by introducing a bounce() function. It
restarts the timer directly before the normal restart functions as
follows:
- Stop timer
- Restart timer with a slow frequency.
- Target time will be >5us
- The subsequent normal restart is outside the critical window
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Stephen Howell <howels@allthatwemight.be> Tested-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20250804080328.2609287-2-markus.stockhausen@gmx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The Microsoft Serial Port Console Redirection (SPCR) specification
revision 1.09 comprises additional field: Precise Baud Rate [1].
It is used to describe non-traditional baud rates (such as those
used by high-speed UARTs).
It contains a specific non-zero baud rate which overrides the value
of the Configured Baud Rate field. If this field is zero or not
present, Configured Baud Rate is used.
The main reason is that 'r8' in insn '70' is not an arena pointer.
Further debugging at llvm side shows that llvm commit ([1]) caused
the failure. For the original code:
page[i] = NULL;
page[i + 1] = NULL;
the llvm transformed it to something like below at source level:
__builtin_memset(&page[i], 0, 16)
Such transformation prevents llvm BPFCheckAndAdjustIR pass from
generating proper addr_space_cast insns ([2]).
Adding support in llvm BPFCheckAndAdjustIR pass should work, but
not sure that such a pattern exists or not in real applications.
At the same time, simply adding a memory barrier between two 'page'
assignment can fix the issue.
sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()
to check if the calling task is allowed to access another task's
robust_list pointer. This check is racy against a concurrent exec() in the
target process.
During exec(), a task may transition from a non-privileged binary to a
privileged one (e.g., setuid binary) and its credentials/memory mappings
may change. If get_robust_list() performs ptrace_may_access() before
this transition, it may erroneously allow access to sensitive information
after the target becomes privileged.
A racy access allows an attacker to exploit a window during which
ptrace_may_access() passes before a target process transitions to a
privileged state via exec().
For example, consider a non-privileged task T that is about to execute a
setuid-root binary. An attacker task A calls get_robust_list(T) while T
is still unprivileged. Since ptrace_may_access() checks permissions
based on current credentials, it succeeds. However, if T begins exec
immediately afterwards, it becomes privileged and may change its memory
mappings. Because get_robust_list() proceeds to access T->robust_list
without synchronizing with exec() it may read user-space pointers from a
now-privileged process.
This violates the intended post-exec access restrictions and could
expose sensitive memory addresses or be used as a primitive in a larger
exploit chain. Consequently, the race can lead to unauthorized
disclosure of information across privilege boundaries and poses a
potential security risk.
Take a read lock on signal->exec_update_lock prior to invoking
ptrace_may_access() and accessing the robust_list/compat_robust_list.
This ensures that the target task's exec state remains stable during the
check, allowing for consistent and synchronized validation of
credentials.
Refuse to register a cpuidle device if the given CPU has a cpuidle
device already and print a message regarding it.
Without this, an attempt to register a new cpuidle device without
unregistering the existing one leads to the removal of the existing
cpuidle device without removing its sysfs interface.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
71 | info.func_info = ptr_to_u64(&finfo);
| ^~~~~
prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2294 | info.func_info = ptr_to_u64(&func_info);
|
The X1E80100 battery management firmware sends a notification with
code 0x83 when the battery charging state changes, such as switching
between fast charge, taper charge, end of charge, or any other error
charging states.
The same notification code is used with bit[8] set when charging stops
because the charge control end threshold is reached. Additionally,
a 2-bit value is included in bit[10:9] with the same code to indicate
the charging source capability, which is determined by the calculated
power from voltage and current readings from PDOs: 2 means a strong
charger over 60W, 1 indicates a weak charger, and 0 means there is no
charging source.
These 3-MSB [10:8] in the notification code is not much useful for now,
hence just ignore them and trigger a power supply change event whenever
0x83 notification code is received. This helps to eliminate the unknown
notification error messages.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com> Closes: https://lore.kernel.org/all/r65idyc4of5obo6untebw4iqfj2zteiggnnzabrqtlcinvtddx@xc4aig5abesu/ Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
The cpupower_write_sysfs() function currently returns -1 on
write failure, but the function signature indicates it should
return an unsigned int. Returning -1 from an unsigned function
results in a large positive value rather than indicating
an error condition.
Fix this by returning 0 on failure, which is more appropriate
for an unsigned return type and maintains consistency with typical
success/failure semantics where 0 indicates failure and non-zero
indicates success (bytes written).
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/u4ttvhnn7lark5w3sgrbuy2rxupcvosp4qmvj46nwzgeo5ausc@uyrkdls2muwx Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/rsdinhafrtlguauhesmrrzkybpnvwantwmyfq2ih5aregghax5@mhr7v3eryci3/ Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A TEE driver doesn't always need to provide a pool if it doesn't
support memory sharing ioctls and can allocate memory for TEE
messages in another way. Although this is mentioned in the
documentation for tee_device_alloc(), it is not handled correctly.
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: https://github.com/acpica/acpica/commit/53fc0220 Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
IO time is considered busy by default for modern Intel processors. The
current check covers recent Family 6 models but excludes the brand new
Families 18 and 19.
According to Arjan van de Ven, the model check was mainly due to a lack
of testing on systems before INTEL_CORE2_MEROM. He suggests considering
all Intel processors as having an efficient idle.
Extend the IO busy classification to all Intel processors starting with
Family 6, including Family 15 (Pentium 4s) and upcoming Families 18/19.
Use an x86 VFM check and move the function to the header file to avoid
using arch-specific #ifdefs in the C file.
On certain Loongson platforms, drivers attempting to request a legacy
ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The
virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.
This issue does not affect ACPI-enumerated devices described in DSDT,
as their interrupts are properly mapped via the GSI translation path.
This indicates the LPC irqdomain itself is functional but is not correctly
handling direct VIRQ-to-HWIRQ mappings.
The root cause is the use of irq_domain_create_linear(). This API sets
up a domain for dynamic, on-demand mapping, typically triggered by a GSI
request. It does not pre-populate the mappings for the legacy VIRQ range
(0-15). Consequently, if no ACPI device claims a specific GSI
(e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to
the LPC domain. A direct call to request_irq(4, ...) then fails because
the kernel cannot resolve this VIRQ to a hardware interrupt managed by
the LPC controller.
The PCH-LPC interrupt controller is an i8259-compatible legacy device
that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to
support legacy drivers.
Fix this by replacing irq_domain_create_linear() with
irq_domain_create_legacy(). This API is specifically designed for such
controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ
mapping for the entire legacy range (0-15) immediately upon domain
creation. This ensures that any VIRQ in this range is always resolvable,
making direct calls to request_irq() for legacy IRQs function correctly.
Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is mainly because the "name" field of power_supply_desc is a constant.
This patch fixes the issue by reusing the same approach as sbs-battery.
With this patch, the result is:
[ 7.819532] sbs-charger 18-0009: ltc4100: smart charger device registered
[ 7.825305] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[ 7.887423] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[ 7.893501] sbs-charger 20-0009: ltc4100: smart charger device registered
Unlike all the other allocations in this driver, the memory for storing
the pin function descriptions allocated with kcalloc() and later resized
with krealloc() is never freed. Use devres like elsewhere to handle
that. While at it - replace krealloc() with more suitable
devm_krealloc_array().
Note: the logic in this module is pretty convoluted and could probably
use some revisiting, we should probably be able to calculate the exact
amount of memory needed in advance or even skip the allocation
altogether and just add each function to the radix tree separately.
Many AMD CPUs can support this feature now. We would get a wrong CPU DIE
temperature if don't consider this. In low-temperature environments,
the CPU die temperature can drop below zero. So many platforms would like
to make extended temperature range as their default configuration.
Default temperature range (0C to 255.875C).
Extended temperature range (-49C to +206.875C).
Ref Doc: AMD V3000 PPR (Doc ID #56558).
This fixes differences for the P8 system that was initially set to
the same thermal values as the P7, also adds in the PSU sensor for
all of the supported systems
Signed-off-by: David Ober <dober@lenovo.com> Signed-off-by: David Ober <dober6023@gmail.com> Link: https://lore.kernel.org/r/20250807103228.10465-1-dober6023@gmail.com
[groeck: Update subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The device ID of Strix Halo Data Fabric Function 3 has been in the tree
since commit 0e640f0a47d8 ("x86/amd_nb: Add new PCI IDs for AMD family
0x1a"), but is somehow missing from k10temp_id_table.
Add it so that it works out of the box.
Tested on Beelink GTR9 Pro Mini PC.
Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The workload hint may contain some other hints which are not defined.
So mask out unsupported types. Currently only lower 4 bits of workload
type hints are defined.
The current behavior of the Step-wise thermal governor is to increase
the cooling level one step at a time after trip point threshold passing
by thermal zone temperature until the temperature stops to rise. Then,
nothing is done until the temperature decreases below the (possibly
updated) trip point threshold, at which point the cooling level is
reduced straight to the applicable minimum.
While this generally works, it is not in agreement with the throttling
logic description comment in step_wise_manage() any more after some
relatively recent changes, and in the case of passive cooling, it may
lead to undesirable performance oscillations between high and low
levels.
For this reason, modify the governor's cooling device state selection
function, get_target_state(), to reduce cooling by one level even if
the temperature is still above the thermal zone threshold, but the
temperature has started to fall down. However, ensure that the cooling
level will remain above the applicable minimum in that case to pull
the zone temperature further down, possibly until it falls below the
trip threshold (which may now be equal to the low temperature of the
trip).
Doing so should help higher performance to be restored earlier in some
cases which is desirable especially for passive trip points with
relatively high hysteresis values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/1947735.tdWV9SEqCh@rafael.j.wysocki
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some x86/ACPI laptops with MIPI cameras have a INTC10DE or INTC10E0 ACPI
device in the _DEP dependency list of the ACPI devices for the camera-
sensors (which have flags.honor_deps set).
These devices are for an Intel Vision CVS chip for which an out of tree
driver is available [1].
The camera sensor works fine without a driver being loaded for this
ACPI device on the 2 laptops this was tested on:
ThinkPad X1 Carbon Gen 12 (Meteor Lake)
ThinkPad X1 2-in-1 Gen 10 (Arrow Lake)
For now add these HIDs to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met and an i2c_client for the camera sensor will get
instantiated.
Just like the other Vivobooks here, the N6506CU has its keyboard IRQ
described as ActiveLow in the DSDT, which the kernel overrides to
EdgeHigh, causing the internal keyboard not to work.
Add the N6506CU to the irq1_level_low_skip_override[] quirk table to fix
this.
If handler_address or mapped VA is NULL, the related buffer address and
VA can be ignored, so make acpi_parse_prmt() skip the current handler
in those cases.
The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the
low-order bits of the MSI Message DATA register to encode nr_irqs interrupt
numbers in the log2(nr_irqs) bits for the domain.
The problem arises if the base vector (GICV2m base spi) is not aligned with
nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base
vector conflict with the nr_irqs masking, causing the wrong MSI interrupt
to be identified.
To fix this, use bitmap_find_next_zero_area_off() instead of
bitmap_find_free_region() to align the initial base vector with nr_irqs.
Currently, even if some subtests fails, the end result will still yield
"ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are
any failures.
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
For arc architecture with CONFIG_ISA_ARCV2=y, the __fls() function
uses __builtin_arc_fls() which lacks GCC's const attribute, preventing
compile-time constant folding, and KUnit testing of ffs/fls fails on
arc[3]. A patch[2] to GCC to solve this has been sent.
Add a fix for this by handling compile-time constants with the standard
__builtin_clzl() builtin (which has const attribute) while preserving
the optimized arc-specific builtin for runtime cases. This has the added
benefit of skipping runtime calculation of compile-time constant values.
Even with the GCC bug fixed (which is about "attribute const") this is a
good change to avoid needless runtime costs, and should be done
regardless of the state of GCC's bug.
Build tested ARCH=arc allyesconfig with GCC arc-linux 15.2.0.
longhaul_exit() was calling cpufreq_cpu_get(0) without checking
for a NULL policy pointer. On some systems, this could lead to a
NULL dereference and a kernel warning or panic.
This patch adds a check using unlikely() and returns early if the
policy is NULL.
Commit e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level
APIs") redefined the way that bpf_prog_detach2() returns. Therefore, adapt
the usage in test_lirc_mode2_user.c.
On x86-64, USDT arguments can be specified using Scale-Index-Base (SIB)
addressing, e.g. "1@-96(%rbp,%rax,8)". The current USDT implementation
in libbpf cannot parse this format, causing `bpf_program__attach_usdt()`
to fail with -ENOENT (unrecognized register).
This patch fixes this by implementing the necessary changes:
- add correct handling for SIB-addressed arguments in `bpf_usdt_arg`.
- add adaptive support to `__bpf_usdt_arg_type` and
`__bpf_usdt_arg_spec` to represent SIB addressing parameters.
Since str_obj is allocated by ACPICA in acpi_evaluate_object_typed(),
it should be free with ACPI_FREE() rather than with kfree(), so use
the former instead of the latter for freeing it.
Send zc only links ubuf_info for requests coming from the same context.
There are some ambiguous syz reports, so let's check the assumption on
notification completion.
plic_set_affinity() always calls plic_irq_enable(), which clears up the
priority setting even the interrupt is only masked. This unmasks the
interrupt unexpectly.
Replace the plic_irq_enable/disable() with plic_irq_toggle() to avoid
changing the priority setting.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nam Cao <namcao@linutronix.de> # VisionFive 2 Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/all/20250811002633.55275-1-inochiama@gmail.com Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The value of OHCI1394_SelfIDCount register includes an error-indicating
bit. It is safer to place the tracepoint probe after validating the
register value.
In the following toy program (reg states minimized for readability), R0
and R1 always have different values at instruction 6. This is obvious
when reading the program but cannot be guessed from ranges alone as
they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).
Looking at tnums however, we can deduce that R1 is always different from
R0 because their tnums don't agree on known bits. This patch uses this
logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.
This change has a tiny impact on complexity, which was measured with
the Cilium complexity CI test. That test covers 72 programs with
various build and load time configurations for a total of 970 test
cases. For 80% of test cases, the patch has no impact. On the other
test cases, the patch decreases complexity by only 0.08% on average. In
the best case, the verifier needs to walk 3% less instructions and, in
the worst case, 1.5% more. Overall, the patch has a small positive
impact, especially for our largest programs.
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Add timeout handling to wait_for_completion calls in memstick_set_rw_addr()
and memstick_alloc_card() to prevent indefinite blocking in case of
hardware or communication failures.
In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or
PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias()
which writes the register. However, the subsequent operations continue
using the stale 'data' value from before the register write, effectively
causing the bias clear operation to be overwritten and not take effect.
Fix this by reading the 'data' value from the register after calling
pcs_pinconf_clear_bias().
This bug seems to have existed when this code was first merged in commit 9dddb4df90d1 ("pinctrl: single: support generic pinconf").
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible
crashes. The problem is that kernel page tables are modified without
flushing corresponding TLB entries.
Even if it looks like the empty flush_tlb_all() implementation on s390 is
the problem, it is actually a different problem: on s390 it is not allowed
to replace an active/valid page table entry with another valid page table
entry without the detour over an invalid entry. A direct replacement may
lead to random crashes and/or data corruption.
In order to invalidate an entry special instructions have to be used
(e.g. ipte or idte). Alternatively there are also special instructions
available which allow to replace a valid entry with a different valid
entry (e.g. crdte or cspg).
Given that the HVO code currently does not provide the hooks to allow for
an implementation which is compliant with the s390 architecture
requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is
basically a revert of the original patch which enabled it.
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space.
In a past bug fix it was forgotten that entity access must be protected
by the entity lock. That's a data race and potentially UB.
Move the spin_unlock() to the appropriate position.
Cc: stable@vger.kernel.org # v5.13+ Fixes: ac4eb83ab255 ("drm/sched: select new rq even if there is only one v3") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patch.msgid.link/20251022063402.87318-2-phasta@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
