pinctrl: ocelot: Update alt mode reg addr calculation
Lan9645x is the first chip supported by this driver where the pin stride
is different from the alt mode stride. With 51 pins and up to 7 alt
modes, we have stride = 2 and alt_mode_stride = 3.
The current REG_ALT macro has the implicit assumption that these numbers
are equal, so it does not work for lan9645x.
The pin stride is the 'stride' variable in the driver. It is the size
of certain register groups which depends on the number of pins supported
by the device. Generally we have stride = DIV_ROUND_UP(npins, 32). E.g:
GPIO_OUT_SET0
GPIO_OUT_SET1
...
GPIO_OUT_SETn
The alt mode registers are further replicated by the number of bits
necessary to represent the alt mode. For instance if we need 3 bits to
represent the alt mode:
GPIO_ALT0[0-2]
GPIO_ALT1[0-2]
To set alt mode 3 on pin 12, it is necessary to perform writes
The stride and alt mode stride are used by the REG_ALT macro to
calculate the alt mode register address for a given pin.
This adds the option to specify n_alt_modes, which is used to set
info->altm_stride. The default value is info->stride, to make sure
existing devices are unaffected by this change.
Conor Dooley [Tue, 20 Jan 2026 18:15:42 +0000 (18:15 +0000)]
pinctrl: add polarfire soc mssio pinctrl driver
On Polarfire SoC, the Bank 2 and Bank 4 IOs connected to the
Multiprocessor Subsystem (MSS) are controlled by IOMUX_CRs 1 through 6,
which determine what function in routed to them, and
MSSIO_BANK#_IO_CFG_CRs, which determine the configuration of each pin.
Add a driver for this pin controller, including several custom
properties that reflect aspects of the MSS's configuration.
Reuse the Kconfig option for iomux0, since controlling MSSIOs without
iomux0 routing a function to the MSSIOs in question is pointless, and
routing a function to the MSSIOs is equally unhelpful if none of them
are configured to make use of that function.
On Polarfire SoC, the Bank 2 and Bank 4 IOs connected to the
Multiprocessor Subsystem (MSS) are controlled by IOMUX_CRs 1 through 6,
which determine what function in routed to them, and
MSSIO_BANK#_IO_CFG_CRs, which determine the configuration of each pin.
Document it, including several custom configuration options that stem
from MSS Configurator options (the MSS Configurator is part of the FPGA
tooling for this device). "ibufmd" unfortunately is not a 1:1 mapping
with an MSS Configurator option, unlike clamp-diode or lockdown, and I
do not know the effect of any bits in the field. I have no been able to
find an explanation for these bits in documentation.
Conor Dooley [Tue, 20 Jan 2026 18:15:40 +0000 (18:15 +0000)]
pinctrl: add generic functions + pins mapper
Add a generic function to allow creation of groups and functions at
runtime based on devicetree content, before setting up mux mappings.
It works similarly to pinconf_generic_dt_node_to_map(), and
therefore parses pinconf properties and maps those too, allowing it
to be used as the dt_node_to_map member of the pinctrl_ops struct.
Mahua TLMM block is identical to Glymur, but the PDC wake IRQ map
differs since PDC handles the interrupt for GPIO 155 instead of GPIO 143
as seen on Glymur. Hence add the Mahua-specific PDC map to the Glymur
TLMM driver.
Document the pinctrl compatible for the Mahua SoC, a 12-core variant
of Glymur. The PDC wake IRQ map differs since PDC handles the interrupt
for GPIO 155 instead of GPIO 143 as seen on Glymur.
Troy Mitchell [Thu, 8 Jan 2026 06:42:39 +0000 (14:42 +0800)]
pinctrl: spacemit: support I/O power domain configuration
Dual-voltage GPIO banks default to 3.3V operation. Even when a bank is
externally supplied with 1.8V, the internal logic remains in the 3.3V
domain, leading to functional failures.
Add support for programming the IO domain power control registers to
allow explicit configuration for 1.8V operation.
These registers are secure due to hardware safety constraints.
Specifically, configuring the domain for 1.8V while externally supplying
3.3V causes back-powering and potential pin damage. Consequently, access
requires unlocking the AIB Secure Access Register (ASAR) in the APBC
block before any read or write operation.
In order to access the protected IO power domain registers, a valid
unlock sequence must be performed by writing the required keys to the
AIB Secure Access Register (ASAR).
The ASAR register resides within the APBC register address space.
A corresponding syscon property is added to allow the pinctrl driver
to access this register.
pinctrl: st: Annotate st_pinconf_dbg_show() as holding mutex
st_pinconf_dbg_show() unlocks and locks the pinctrl_dev mutex, so it
must be called by the pinctrl core with the mutex hold. Annotate the
function with sparse __must_hold, so any changes in pinctrl locking will
be statically detected.
pinctrl: tegra-xusb: Return void in padctl enable/disable functions
Make the padctl functions a bit simpler by returning void instead of
always '0'. The callers - phy init/exit - still need to return 0, but
these are smaller function without if/branching.
Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Simplify error handling (less gotos) over locks with guard() which also
removes possibility (at least by reading the code) of returning
uninitialized rc/ret value in aw9523_pconf_set() and
aw9523_gpio_get_multiple() functions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Remove unused includes from internal headers, because they do not have
following: bit manipulations, mutexes, spinlocks and struct devices.
These headers are included by actual C files, which seem to have all
necessary includes.
This function will check if the indicated function enumerator
i.e. the value set into bits 5 and 6 of the pin configuration
register, is zero and thus corresponds to the GPIO mode of the
pin.
This may be necessary to know since the pin controller is
flagged as "strict": once you set a pin *explicitly* to GPIO
mode using function 0, the core is unaware that this is
actually the GPIO mode, and clients may be denied to
retrieve the pin as a GPIO.
Currently none of the in-kernel device trees sets any pin to
GPIO mode, but this may happen any day.
Reviewed-by: Sven Peter <sven@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Cosmin Tanislav [Fri, 9 Jan 2026 14:39:10 +0000 (16:39 +0200)]
pinctrl: renesas: rzt2h: Add GPIO IRQ chip to handle interrupts
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have
IRQ-capable pins handled by the ICU, which forwards them to the GIC.
The ICU supports 16 IRQ lines, the pins map to these lines arbitrarily,
and the mapping is not configurable.
Add a GPIO IRQ chip to the pin controller that can be used to configure
these pins as IRQ lines.
The pin controller places the requested pins into IRQ function,
disabling GPIO mode. A hierarchical IRQ domain is used to forward other
functionality to the parent IRQ domain, the ICU. The ICU does level
translation and then forwards other functionality to the GIC.
Wakeup capability is implemented by placing the entire pin controller on
the wakeup path if any pins are requested to be wakeup-capable.
Cosmin Tanislav [Fri, 5 Dec 2025 15:02:28 +0000 (17:02 +0200)]
pinctrl: renesas: rzt2h: Allow .get_direction() for IRQ function GPIOs
Setting up an IRQ would normally be done in the .activate() and
.deactivate() ops of the IRQ domain, but for hierarchical IRQ domains
the .activate() and .deactivate() ops are overridden in the
gpiochip_hierarchy_setup_domain_ops() function.
As such, activating and deactivating need to be done in the .translate()
and .free() ops of the IRQ domain.
For RZ/T2H and RZ/N2H, interrupts go through the pin controller, into
the ICU, which level-translates them and forwards them to the GIC.
To use a GPIO as an interrupt it needs to be put into peripheral
function mode 0, which will connect it to the IRQ lines of the ICU.
The IRQ chip .child_to_parent_hwirq() callback is called as part of the
IRQ fwspec parsing logic (as part of irq_create_of_mapping()) which
happens before the IRQ is requested (as part of gpiochip_lock_as_irq()).
gpiochip_lock_as_irq() calls gpiod_get_direction() if the
.get_direction() callback is provided to ensure that the GPIO line is
set up as input.
In our case, IRQ function is separate from GPIO, and both cannot be true
at the same time.
Return GPIO_LINE_DIRECTION_IN even if pin is in IRQ function to allow
this setup to work.
Hold the spinlock to ensure atomicity between reading the PMC register
(which determines whether the pin is in GPIO mode or not) and reading
the function of the pin when it is not in GPIO mode.
pinctrl: meson: amlogic-a4: mark the GPIO controller as sleeping
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization. This will cause
lockdep splats when used together with shared GPIOs going through the
GPIO shared proxy driver.
Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs") Cc: stable@vger.kernel.org Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Closes: https://lore.kernel.org/all/CAFBinCAc7CO8gfNQakCu3LfkYXuyTd2iRpMRm8EKXSL0mwOnJw@mail.gmail.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl: meson: extend build coverage with COMPILE_TEST=y
We currently only build these drivers on ARM but there's nothing that
should stop us from building it with allmodconfig on other
architectures. Extend the build coverage for all meson drivers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
Ryan Wanner [Mon, 5 Jan 2026 09:59:56 +0000 (10:59 +0100)]
pinctrl: at91-pio4: Add sama7d65 pio4 support
Add sama7d65 compatibility string.
Sama7d65 does not have a full last bank of PIO lines similar to the
Sama7g54 SoC. Sama7d65 only has 14 lines on the last PIO bank not the
full 32; adjusting the SoC attributes accordingly.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Peng Fan [Wed, 17 Dec 2025 02:40:46 +0000 (10:40 +0800)]
pinctrl: imx: Add support for NXP i.MX952
The i.MX952 System Manager (SM) firmware supports the System Control
Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM.
The base offset for the i.MX952 IOMUXC Daisy input register differs from
that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for
i.MX952.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl: imx: Support NXP scmi extended mux config
i.MX94 has special muxing options for certain pins. Their mux settings
are not in IOMUXC module. i.MX System Manager Firmware includes new vendor
defined pinctrl type to SCMI pinctrl driver to handle these pins. The MUX
value field in the IOMUX table is extended to 16 bits where the lower 8
bits represent the current IOMUX value and the upper 8 bits represent the
new extended mux added in i.MX94.
Chen-Yu Tsai [Thu, 25 Dec 2025 10:36:13 +0000 (18:36 +0800)]
dt-bindings: pinctrl: sunxi: Allow pinmux sub-pattern with leading numbers
The pattern for pinmux node names is typically the peripheral name and
instance number, followed by pingroup name if there are multiple options.
Normally the instance number is directly appended to the peripheral
name, like "mmc0" or "i2c2". But if the peripheral name ends with a
number, then it becomes confusing.
On the A20, the PS2 interface controller has two instances. This
produces pinmux node names like "ps2-0-pins". Make the sub-pattern
"[0-9]-" valid to fit this pattern. Avoid having to confusing "ps20-pins"
name.
Yixun Lan [Fri, 2 Jan 2026 07:00:25 +0000 (15:00 +0800)]
pinctrl: spacemit: k3: adjust drive strength and schmitter trigger
K3 SoC expand drive strength to 4 bits which support even larger
settings table comparing to old SoC generation. Also schmitter trigger
setting is changed to 1 bit.
Signed-off-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
Yixun Lan [Fri, 2 Jan 2026 07:00:24 +0000 (15:00 +0800)]
pinctrl: spacemit: k3: add initial pin support
For the pinctrl IP of SpacemiT's K3 SoC, it has different register offset
comparing with previous SoC generation, so introduce a function to do the
pin to offset mapping. Also add all the pinctrl data.
Signed-off-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Linus Walleij <linusw@kernel.org>
Yixun Lan [Fri, 2 Jan 2026 07:00:23 +0000 (15:00 +0800)]
dt-bindings: pinctrl: spacemit: add K3 SoC support
Add new compatible string for SpacemiT K3 SoC, the pinctrl IP shares
almost same logic with previous K1 generation, but has different register
offset and pin configuration, for example the drive strength and
schmitter trigger settings has been changed.
Signed-off-by: Yixun Lan <dlan@gentoo.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
Liang Jie [Tue, 9 Dec 2025 10:02:17 +0000 (18:02 +0800)]
pinctrl: mediatek: make devm allocations safer and clearer in mtk_eint_do_init()
mtk_eint_do_init() allocates several pointer arrays which are then
populated in a per-instance loop and freed on error. The arrays are
currently allocated with devm_kmalloc(), so their entries are left
uninitialised until the per-instance allocations succeed.
On a failure in the middle of the loop, the error path iterates over
the full nbase range and calls devm_kfree() on each element. For
indices which were never initialised, the corresponding array entries
contain stack garbage. If any of those happen to be non-zero,
devm_kfree() will pass them to devres_destroy(), which will WARN
because there is no matching devm_kmalloc() resource for such bogus
pointers.
Improve the robustness and readability by:
- Using devm_kcalloc() for the pointer arrays so that all entries
start as NULL, ensuring that only genuinely initialised elements
may be freed and preventing spurious WARN_ON()s in the error path.
- Switching the allocations to sizeof(*ptr) / sizeof(**ptr) forms,
avoiding hard-coded element types and making the code more resilient
to future type changes.
- Dropping the redundant NULL checks before devm_kfree(), as
devm_kfree() safely handles NULL pointers.
The functional behaviour in the successful initialisation path remains
unchanged, while the error handling becomes simpler and less
error-prone.
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Linus Torvalds [Fri, 12 Dec 2025 17:44:03 +0000 (05:44 +1200)]
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
Linus Torvalds [Fri, 12 Dec 2025 10:04:18 +0000 (22:04 +1200)]
Merge tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
Linus Torvalds [Fri, 12 Dec 2025 10:01:32 +0000 (22:01 +1200)]
Merge tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
Linus Torvalds [Fri, 12 Dec 2025 09:59:19 +0000 (21:59 +1200)]
Merge tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
Linus Torvalds [Fri, 12 Dec 2025 09:52:42 +0000 (21:52 +1200)]
Merge tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
Brendan Jackman [Sun, 7 Dec 2025 03:53:18 +0000 (03:53 +0000)]
bug: Hush suggest-attribute=format for __warn_printf()
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Heiko Carstens [Mon, 8 Dec 2025 20:06:58 +0000 (21:06 +0100)]
bug: Let report_bug_entry() provide the correct bugaddr
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Evan Li [Fri, 12 Dec 2025 08:49:43 +0000 (16:49 +0800)]
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") Reported-by: kitta <kitta@linux.alibaba.com> Co-developed-by: kitta <kitta@linux.alibaba.com> Signed-off-by: Evan Li <evan.li@linux.alibaba.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Linus Torvalds [Thu, 11 Dec 2025 03:13:29 +0000 (12:13 +0900)]
Merge tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Linus Torvalds [Thu, 11 Dec 2025 00:57:08 +0000 (09:57 +0900)]
Merge tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for SPI that came in during the merge window,
nothing too exciting here"
* tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: Fix an error handling path in mchp_corespi_probe()
spi: cadence-qspi: Fix runtime PM imbalance in probe
Linus Torvalds [Thu, 11 Dec 2025 00:54:59 +0000 (09:54 +0900)]
Merge tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
Arnd Bergmann [Thu, 4 Dec 2025 10:01:58 +0000 (11:01 +0100)]
mm: memfd_luo: add CONFIG_SHMEM dependency
The new memfd code fails to link without SHMEM:
aarch64-linux-ld: mm/memfd_luo.o: in function `memfd_luo_retrieve_folios':
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0xdc): undefined reference to `shmem_add_to_page_cache'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x11c): undefined reference to `shmem_inode_acct_blocks'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x134): undefined reference to `shmem_recalc_inode'
Add a Kconfig dependency to disallow that configuration.
projects / thirdparty / kernel / linux.git / log
