The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
destroy element command bogusly reports ENOENT in case a set element
does not exist. ENOENT errors are skipped, however, err is still set
and propagated to userspace.
# nft destroy element ip raw BLACKLIST { 1.2.3.4 }
Error: Could not process rule: No such file or directory
destroy element ip raw BLACKLIST { 1.2.3.4 }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: f80a612dd77c ("netfilter: nf_tables: add support to destroy operation") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on... On each
iteration we are writing 8 bytes. But dst[] is an array of u32 so each
element only has space for 4 bytes. That means that every iteration
overwrites part of the previous element.
I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue. I think that the reason we have not detected this bug in testing
is that most of time we only write one element.
Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After releasing unix socket lock, u->oob_skb can be changed
by another thread. We must temporarily increase skb refcount
to make sure this other thread will not free the skb under us.
[1]
BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297
The buggy address belongs to the object at ffff88801f3b9c80
which belongs to the cache skbuff_head_cache of size 240
The buggy address is located 68 bytes inside of
freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70)
Memory state around the buggy address: ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.
If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:
If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:
The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.
Since no hardware checksum will happen, we slot in a software
checksum fallback.
Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.
On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 9eed321cde22 ("net: lapbether: only support ethernet devices")
has been able to keep syzbot away from net/lapb, until today.
In the following splat [1], the issue is that a lapbether device has
been created on a bonding device without members. Then adding a non
ARPHRD_ETHER member forced the bonding master to change its type.
The fix is to make sure we call dev_close() in bond_setup_by_slave()
so that the potential linked lapbether devices (or any other devices
having assumptions on the physical device) are removed.
A similar bug has been addressed in commit 40baec225765
("bonding: fix panic on non-ARPHRD_ETHER enslave failure")
As I was working on a syzbot report, I found that KCSAN would
probably complain that reading q->head or q->tail without
barriers could lead to invalid results.
Add corresponding READ_ONCE() and WRITE_ONCE() to avoid
load-store tearing.
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
blk_integrity_unregister() can come if queue usage counter isn't held
for one bio with integrity prepared, so this request may be completed with
calling profile->complete_fn, then kernel panic.
Another constraint is that bio_integrity_prep() needs to be called
before bio merge.
Fix the issue by:
- call bio_integrity_prep() with one queue usage counter grabbed reliably
- call bio_integrity_prep() before bio merge
Fixes: 900e080752025f00 ("block: move queue enter logic into blk_mq_submit_bio()") Reported-by: Yi Zhang <yi.zhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Link: https://lore.kernel.org/r/20231113035231.2708053-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When delaying eoi handling of events, the related elements are queued
into the percpu lateeoi list. In case the list isn't empty, the
elements should be sorted by the time when eoi handling is to happen.
Unfortunately a new element will never be queued at the start of the
list, even if it has a handling time lower than all other list
elements.
Fix that by handling that case the same way as for an empty list.
Fixes: e99502f76271 ("xen/events: defer eoi in case of excessive number of events") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ppp_sync_ioctl allows setting device MRU, but does not sanity check
this input.
Limit to a sane upper bound of 64KB.
No implementation I could find generates larger than 64KB frames.
RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the
16-bit length field. Other protocols will be smaller, such as PPPoE
(9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364).
PPTP and L2TP encapsulate in IP.
Syzbot managed to trigger alloc warning in __alloc_pages:
if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp))
WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544
Similar code exists in other drivers that implement ppp_channel_ops
ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from
this are pppol2tp_ioctl and pppoe_ioctl.
This code goes back to the start of git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling page_pool_get_stats in the mvneta driver without checks
leads to kernel crashes.
First the page pool is only available if the bm is not used.
The page pool is also not allocated when the port is stopped.
It can also be not allocated in case of errors.
The current implementation leads to the following crash calling
ethstats on a port that is down or when calling it at the wrong moment:
This commit adds the proper checks before calling page_pool_get_stats.
Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bytes 34-35 of 36 are uninitialized
Memory access of size 36 starts at ffff88802d464a00
Data copied to user address 00007ff55033c0a0
CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================
tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is
calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and
the length of TLV value passed as an argument, and aligns the result to a
multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes.
If the size of struct tlv_desc plus the length of TLV value is not aligned,
the current implementation leaves the remaining bytes uninitialized. This
is the cause of the above kernel-infoleak issue.
This patch resolves this issue by clearing data up to an aligned size.
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries the port information from firmware.
After imp reset command is executed, PF status changes to down,
and PF will query link status and updates port information
from firmware in a periodic scheduled task.
However, there is a low probability that port information is updated
when PF is down, and then PF link status changes to up.
In this case, PF synchronizes incorrect rate and duplex mode to VF.
This patch fixes it by updating port information before
PF synchronizes the rate and duplex to the VF
when PF changes to up.
Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. We think firmware watchdog initialization is completed
before VF clear the interrupt source. However, firmware initialization
may not complete early. So VF will receive multiple reset interrupts
and fail to reset.
So we add delay before VF interrupt source and 5 ms delay
is enough to avoid second reset interrupt.
Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may
return fail, then the value of mac_addr_temp is not initialized.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hns3 driver define an array of string to show the coalesce
info, but if the kernel adds a new mode or a new state,
out-of-bounds access may occur when coalesce info is read via
debugfs, this patch fix the problem.
Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the FEC capability bit is default set for device version V2.
It's incorrect for the copper port. Eventhough it doesn't make the nic
work abnormal, but the capability information display in debugfs may
confuse user. So clear it when driver get the port type inforamtion.
Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions,
there is a typical store-store and load-load scenario between
received_resp and additional_info. This patch adds barrier
to fix the problem.
Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hclge_sync_vlan_filter is called in periodic task,
trying to remove VLAN from vlan_del_fail_bmap. It can
be concurrence with VLAN adding operation from user.
So once user failed to delete a VLAN id, and add it
again soon, it may be removed by the periodic task,
which may cause the software configuration being
inconsistent with hardware. So add mutex handling
to avoid this.
xen_send_IPI_one() is being used by cpuhp_report_idle_dead() after
it calls rcu_report_dead(), meaning that any RCU usage by
xen_send_IPI_one() is a bad idea.
Unfortunately xen_send_IPI_one() is using notify_remote_via_irq()
today, which is using irq_get_chip_data() via info_for_irq(). And
irq_get_chip_data() in turn is using a maple-tree lookup requiring
RCU.
Avoid this problem by caching the ipi event channels in another
percpu variable, allowing the use notify_remote_via_evtchn() in
xen_send_IPI_one().
Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management") Reported-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================
ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS
and PPP_UI. However, if the data length is 1 and the first byte is
PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking
PPP_UI. This patch resolves this issue by checking the data length.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Inspired by syzbot reports using a stack of multiple ipvlan devices.
Reduce stack size needed in ipvlan_process_v6_outbound() by moving
the flowi6 struct used for the route lookup in an non inlined
helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack,
immediately reclaimed.
Also make sure ipvlan_process_v4_outbound() is not inlined.
We might also have to lower MAX_NEST_DEV, because only syzbot uses
setups with more than four stacked devices.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.
More details from Eric regarding SOCK_RCU_FREE timeline:
Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.
Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix an edge case in __mark_chain_precision() which prematurely stops
backtracking instructions in a state if it happens that state's first
and last instruction indexes are the same. This situations doesn't
necessarily mean that there were no instructions simulated in a state,
but rather that we starting from the instruction, jumped around a bit,
and then ended up at the same instruction before checkpointing or
marking precision.
To distinguish between these two possible situations, we need to consult
jump history. If it's empty or contain a single record "bridging" parent
state and first instruction of processed state, then we indeed
backtracked all instructions in this state. But if history is not empty,
we are definitely not done yet.
Move this logic inside get_prev_insn_idx() to contain it more nicely.
Use -ENOENT return code to denote "we are out of instructions"
situation.
This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once
the next fix in this patch set is applied.
ldimm64 instructions are 16-byte long, and so have to be handled
appropriately in check_cfg(), just like the rest of BPF verifier does.
This has implications in three places:
- when determining next instruction for non-jump instructions;
- when determining next instruction for callback address ldimm64
instructions (in visit_func_call_insn());
- when checking for unreachable instructions, where second half of
ldimm64 is expected to be unreachable;
We take this also as an opportunity to report jump into the middle of
ldimm64. And adjust few test_verifier tests accordingly.
The randstruct GCC plugin tried to discover "fake" flexible arrays
to issue warnings about them in randomized structs. In the future
LSM overhead reduction series, it would be legal to have a randomized
struct with a 1-element array, and this should _not_ be treated as a
flexible array, especially since commit df8fc4e934c1 ("kbuild: Enable
-fstrict-flex-arrays=3"). Disable the 0-sized and 1-element array
discovery logic in the plugin, but keep the "true" flexible array check.
Cc: KP Singh <kpsingh@kernel.org> Cc: linux-hardening@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311021532.iBwuZUZ0-lkp@intel.com/ Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Reviewed-by: Bill Wendling <morbo@google.com> Acked-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231104204334.work.160-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The put_device() calls vhost_vdpa_release_dev() which calls
ida_simple_remove() and frees "v". So this call to
ida_simple_remove() is a use after free and a double free.
Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
snprintf(tc->port_name, sizeof(tc->port_name),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%c/TC#%d", port_name(port), tc_port + 1);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)
Fixes: 3eafcddf766b ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
(cherry picked from commit 70a3cbbe620ee66afb0c066624196077767e61b2) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 0abd1557e21c added rcu_dereference() for dereferencing ip->i_gl
in gfs2_permission. This now causes lockdep to complain when
gfs2_permission is called in non-RCU context:
WARNING: suspicious RCU usage in gfs2_permission
Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag
to shut up lockdep when we know that dereferencing ip->i_gl is safe.
Fixes: 0abd1557e21c ("gfs2: fix an oops in gfs2_permission") Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
uprobes expects is_trap_insn() to return true for any trap instructions,
not just the one used for installing uprobe. The current default
implementation only returns true for 16-bit c.ebreak if C extension is
enabled. This can confuse uprobes if a 32-bit ebreak generates a trap
exception from userspace: uprobes asks is_trap_insn() who says there is no
trap, so uprobes assume a probe was there before but has been removed, and
return to the trap instruction. This causes an infinite loop of entering
and exiting trap handler.
Instead of using the default implementation, implement this function
speficially for riscv with checks for both ebreak and c.ebreak.
Fixes: 74784081aac8 ("riscv: Add uprobes supported") Signed-off-by: Nam Cao <namcaov@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A hwprobe pair key is signed, but the hwprobe vDSO function was
only checking that the upper bound was valid. In order to help
avoid this type of problem in the future, and in anticipation of
this check becoming more complicated with sparse keys, introduce
and use a "key is valid" predicate function for the check.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.
Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer. That
changed in commit 25cf32ad5dba ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer. Put the check
back.
A related revert was done in commit 13bd90141804 ("Revert "SUNRPC:
Remove unreachable error condition"").
Currently when client sends an EXCHANGE_ID for a possible trunked
connection, for any error that happened, the trunk will be thrown
out. However, an NFS4ERR_DELAY is a transient error that should be
retried instead.
Fixes: e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The newly added memset() causes a warning for some reason I could not
figure out:
In file included from arch/x86/include/asm/string.h:3,
from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
195 | #define memset(s, c, count) __builtin_memset(s, c, count)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
584 | memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
| ^~~~~~
In function 'intel_rc6_init':
Change it to an normal initializer and an added memcpy() that does not have
this problem.
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Yi Yang <yiyang13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.
Fixes: fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu. Add missing brackets to enforce such matching.
Fixes: 0c559bc8abfb ("dt-bindings: serial: restrict possible child node names") Reported-by: Andreas Kemnade <andreas@kemnade.info> Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 06744f24696e ("samples/bpf: Add openat2() enter/exit tracepoint
to syscall_tp sample") added two more eBPF programs to support the
openat2() syscall. However, it did not increase the size of the array
that holds the corresponding bpf_links. This leads to an out-of-bound
access on that array in the bpf_object__for_each_program loop and could
corrupt other variables on the stack. On our testing QEMU, it corrupts
the map1_fds array and causes the sample to fail:
Except on x86, preempt_count is always accessed with READ_ONCE().
Repeated invocations in macros like irq_count() produce repeated loads.
These redundant instructions appear in various fast paths. In the one
shown below, for example, irq_count() is evaluated during kernel entry
if !tick_nohz_full_cpu(smp_processor_id()).
This patch doesn't prevent the pointless btst and beqs instructions
above, but it does eliminate 2 of the 3 pointless move instructions
here and elsewhere.
On x86, preempt_count is per-cpu data and the problem does not arise
presumably because the compiler is free to optimize more effectively.
This patch was tested on m68k and x86. I was expecting no changes
to object code for x86 and mostly that's what I saw. However, there
were a few places where code generation was perturbed for some reason.
The performance issue addressed here is minor on uniprocessor m68k. I
got a 0.01% improvement from this patch for a simple "find /sys -false"
benchmark. For architectures and workloads susceptible to cache line bounce
the improvement is expected to be larger. The only SMP architecture I have
is x86, and as x86 unaffected I have not done any further measurements.
Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.
Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
These enums are passed to set/test_bit(). The set/test_bit() functions
take a bit number instead of a shifted value. Passing a shifted value
is a double shift bug like doing BIT(BIT(1)). The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When software 'pci unplug' using IGT is executed we got a sysfs directory
entry is NULL for differant ras blocks like hdp, umc, etc.
Before call 'sysfs_remove_file_from_group' and 'sysfs_remove_group'
check that 'sd' is not NULL.
Enables the SPI-connected CSC35L41 audio amplifier for this
laptop model.
As of BIOS version 303 it's still necessary to
modify the ACPI table to add the related _DSD properties:
https://github.com/alex-spataru/asus_zenbook_ux7602zm_sound/
The allocated memory for qdev->dumb_heads should be released
in qxl_destroy_monitors_object before qxl suspend.
otherwise,qxl_create_monitors_object will be called to
reallocate memory for qdev->dumb_heads after qxl resume,
it will cause memory leak.
We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".
Reported-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.
If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.
Following are the changes in this patch
- Defines an asm macro to obtain per-cpu symbols in destination
register.
- In entry.S, when overflow is detected, per-cpu overflow stack is
located using per-cpu asm macro. Computing per-cpu symbol requires
a temporary register. x31 is saved away into CSR_SCRATCH
(CSR_SCRATCH is anyways zero since we're in kernel).
Please see Links for additional relevant disccussion and alternative
solution.
Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below
When entering kdb/kgdb on a kernel panic, it was be observed that the
console isn't flushed before the `kdb` prompt came up. Specifically,
when using the buddy lockup detector on arm64 and running:
echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
I could see:
[ 26.161099] lkdtm: Performing direct entry HARDLOCKUP
[ 32.499881] watchdog: Watchdog detected hard LOCKUP on cpu 6
[ 32.552865] Sending NMI from CPU 5 to CPUs 6:
[ 32.557359] NMI backtrace for cpu 6
... [backtrace for cpu 6] ...
[ 32.558353] NMI backtrace for cpu 5
... [backtrace for cpu 5] ...
[ 32.867471] Sending NMI from CPU 5 to CPUs 0-4,7:
[ 32.872321] NMI backtrace forP cpuANC: Hard LOCKUP
Entering kdb (current=..., pid 0) on processor 5 due to Keyboard Entry
[5]kdb>
As you can see, backtraces for the other CPUs start printing and get
interleaved with the kdb PANIC print.
Let's replicate the commands to flush the console in the kdb panic
entry point to avoid this.
[Why & How]
Check whether assigned timing generator is NULL or not before
accessing its funcs to prevent NULL dereference.
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver. It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor. Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.
This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.
Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/ Tested-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix documentation for struct ccs_quirk, a device specific struct for
managing deviations from the standard. The flags field was drifted away
from where it should have been.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In RCU mode, we might race with gfs2_evict_inode(), which zeroes
->i_gl. Freeing of the object it points to is RCU-delayed, so
if we manage to fetch the pointer before it's been replaced with
NULL, we are fine. Check if we'd fetched NULL and treat that
as "bail out and tell the caller to get out of RCU mode".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When lots of quota changes are made, there may be cases in which an
inode's quota information is increased and then decreased, such as when
blocks are added to a file, then deleted from it. If the timing is
right, function do_qc can add pending quota changes to a transaction,
then later, another call to do_qc can negate those changes, resulting
in a net gain of 0. The quota_change information is recorded in the qc
buffer (and qd element of the inode as well). The buffer is added to the
transaction by the first call to do_qc, but a subsequent call changes
the value from non-zero back to zero. At that point it's too late to
remove the buffer_head from the transaction. Later, when the quota sync
code is called, the zero-change qd element is discovered and flagged as
an assert warning. If the fs is mounted with errors=panic, the kernel
will panic.
This is usually seen when files are truncated and the quota changes are
negated by punch_hole/truncate which uses gfs2_quota_hold and
gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock
and gfs2_quota_unlock which automatically do quota sync.
This patch solves the problem by adding a check to qd_check_sync such
that net-zero quota changes already added to the transaction are no
longer deemed necessary to be synced, and skipped.
In this case references are taken for the qd and the slot from do_qc
so those need to be put. The normal sequence of events for a normal
non-zero quota change is as follows:
In the net-zero change case, we add a check to qd_check_sync so it puts
the qd and slot references acquired in gfs2_quota_change and skip the
unneeded sync.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In file included from include/linux/property.h:14,
from include/linux/acpi.h:16,
from drivers/media/pci/intel/ipu-bridge.c:4:
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: warning: '%u' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fwnode.h: In function 'ipu_bridge_connect_sensor':
include/linux/fwnode.h:81:55: note: format string is defined here
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: note: directive argument in the range [0, 255]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:382:9: note: 'snprintf' output between 7 and 9 bytes into a destination of size 7
382 | snprintf(sensor->node_names.remote_port,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
383 | sizeof(sensor->node_names.remote_port),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/test-drivers/vivid/vivid-rds-gen.c: In function 'vivid_rds_gen_fill':
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:56: warning: '.' directive output may be truncated writing 1 byte into a region of size between 0 and 3 [-Wformat-truncation=]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:52: note: directive argument in the range [0, 9]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:9: note: 'snprintf' output between 9 and 12 bytes into a destination of size 9
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
148 | freq / 16, ((freq & 0xf) * 10) / 16);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'
When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added.
Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/20230818164522.12806-1-coolrrsh@gmail.com Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73 Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device_register() returns error in i2c_new_client_device(),
the name allocated by i2c_dev_set_name() need be freed. As
comment of device_register() says, it should use put_device()
to give up the reference in the error path.
===
I think this solution is less intrusive and more robust than he
originally proposed solutions, though.
Reported-by: Yang Yingliang <yangyingliang@huawei.com> Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20221124085448.3620240-1-yangyingliang@huawei.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not loop over ring headers in hci_dma_irq_handler() that are not
allocated and enabled in hci_dma_init(). Otherwise out of bounds access
will occur from rings->headers[i] access when i >= number of allocated
ring headers.
W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of :
- this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
- since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")
| BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| value changed: 0x00008002 -> 0x00008802
Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.
Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.
Previously, gadget assignment to the net device occurred exclusively
during the initial binding attempt.
Nevertheless, the gadget pointer could change during bind/unbind
cycles due to various conditions, including the unloading/loading
of the UDC device driver or the detachment/reconnection of an
OTG-capable USB hub device.
This patch relocates the gether_set_gadget() function out from
ncm_opts->bound condition check, ensuring that the correct gadget
is assigned during each bind request.
The provided logs demonstrate the consistency of ncm_opts throughout
the power cycle, while the gadget may change.
* OTG hub connected during boot up and assignment of gadget and
ncm_opts pointer
[ 2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105
[ 2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.366306] usb 2-1.5: Product: H2H Bridge
[ 2.366308] usb 2-1.5: Manufacturer: Aptiv
[ 2.366309] usb 2-1.5: SerialNumber: 13FEB2021
[ 2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5, 0000000093a8d681
[ 2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87)
[ 2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode
* OTG capable hub disconnecte or assume driver unload.
[ 97.203114] usb 2-1: USB disconnect, device number 2
[ 97.203118] usb 2-1.1: USB disconnect, device number 3
[ 97.209217] usb 2-1.5: USB disconnect, device number 4
[ 97.230990] dabr_udc deleted
* Reconnect the OTG hub or load driver assaign new gadget pointer.
[ 111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87
[ 111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.534040] usb 2-1.1: Product: Vendor
[ 111.534041] usb 2-1.1: Manufacturer: Aptiv
[ 111.534042] usb 2-1.1: SerialNumber: Superior
[ 111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120
[ 111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd
[ 111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02
[ 111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.630057] usb 2-1.5: Product: H2H Bridge
[ 111.630058] usb 2-1.5: Manufacturer: Aptiv
[ 111.630059] usb 2-1.5: SerialNumber: 13FEB2021
[ 111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5, 000000000d87c961
[ 111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87)
[ 111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 111.692298] gadget 00000000dc72f7a9 --------> new gadget ptr on connect
* NCM opts and associated gadget pointer during second ncm_bind
[ 113.271786] NCM opts 00000000aa304ac9 -----> same opts ptr used during first bind
[ 113.271788] NCM gadget 00000000dc72f7a9 ----> however new gaget ptr, that will not set
in net_device due to ncm_opts->bound = true
There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse. The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked. As per the USB3 specification:
tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")
This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed. However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.
Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.
If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.
Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK
In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.
In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.
Switch to regmap_fields, so that the values written into registers are
sanitized by their explicit sizes and the different registers are
structured in an iterable object to make external changes to the init
sequence simpler.
After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.
As described in the specification, the lower directory size limits
is 0 bytes.
Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Reviewed-by: Andy Wu <Andy.Wu@sony.com> Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.
In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.
It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 5.40a, March 2019, p.1266
This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.
Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.
That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects
wrong endianness in ATS invalidation message body. This problem can lead to
outdated translations being returned as valid and finally cause system
instability.
To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for
vulnerable IPU E2000 devices.
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Link: https://lore.kernel.org/r/20230919125648.1920-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop duplicate include of <linux/bitfield.h>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
