Anton Moryakov [Thu, 6 Feb 2025 22:01:23 +0000 (01:01 +0300)]
common: Add NULL checks for xrealloc in make_string cli_hush.c
- Check return value of xrealloc for NULL.
- Free allocated memory and return NULL if xrealloc fails.
- Prevent NULL pointer dereference in strlen and strcat.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Anton Moryakov [Thu, 6 Feb 2025 21:55:21 +0000 (00:55 +0300)]
common: Add NULL checks for malloc_cache_aligned in autoboot.c
- Check return value of malloc_cache_aligned for presskey and sha.
- Return -ENOMEM if memory allocation fails.
- Free allocated memory in error paths."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Anton Moryakov [Thu, 30 Jan 2025 13:42:43 +0000 (16:42 +0300)]
tools: fix NULL_AFTER_DEREF in image-host.c
Report of the static analyzer:
1. NULL_AFTER_DEREF Pointer 'str', which is dereferenced at
image-host.c:688 by calling function 'strdup', is compared to a NULL
value at image-host.c:691.
2. NULL_AFTER_DEREF Pointer 'list', which is dereferenced at
image-host.c:689, is compared to a NULL value at image-host.c:691.
Corrections explained:
1. Checking for NULL before using pointers: The if (!list || !str) check
is now performed before calling strdup and realloc, which prevents
null pointer dereferences.
2. Checking the result of strdup: strdup can return NULL if memory
allocation fails. This also needs to be checked.
3. Checking the result of realloc: If realloc returns NULL, then memory
has not been allocated and dup must be freed to avoid memory leaks.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Simon Glass [Sun, 1 Dec 2024 14:42:29 +0000 (07:42 -0700)]
CI: Drop extra condition for sjg lab
The rules part of the template makes sure that this doesn't run until
specifically requested. Drop the check in the script itself, so it is
possible to trigger a run manually without re-pushing the tree.
Santhosh Kumar K [Wed, 29 Jan 2025 23:44:02 +0000 (17:44 -0600)]
arm: mach-k3: am62*_init: Probe ESM nodes
On AM62A and AM62P devices, it is possible to route Main ESM error
events to MCU ESM. MCU ESM high error output can trigger the reset
logic to reset the device. So, for these devices we have Main ESM and
MCU ESM nodes in the device tree. Add functions to probe these nodes
if CONFIG_ESM_K3 is enabled.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
Andre Przywara [Thu, 30 Jan 2025 13:36:46 +0000 (13:36 +0000)]
env: fat: Avoid writing to read-only location
The env_fat_get_dev_part() function mostly returns a fixed string, set
via some Kconfig variable. However when the first character is a colon,
that means that the boot device number is determined at runtime, and
patched in. This requires altering the string.
So far this was done via some ugly and actually illegal direct write to
the .rodata string storage. We got away with this because U-Boot maps
everything as read/write/execute so far.
A proposed patch set actually enforces read-only (and no-execute)
permissions in the page tables, so this routine now causes an exception:
=======================
Loading Environment from FAT... "Synchronous Abort" handler, esr 0x9600004f, far 0xfffb7d4c
elr: 000000004a054228 lr : 000000004a05421c (reloc)
elr: 00000000fff7c228 lr : 00000000fff7c21c
.....
=======================
Rewrite the routine to do away with the dodgy string manipulation,
instead allocate the string in the r/w .data section, where we can
safely manipulate it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tom Rini [Mon, 10 Feb 2025 16:29:36 +0000 (10:29 -0600)]
Merge patch series "FIX: Re-enable MUX_MMIO on J721E/J7200"
Siddharth Vadapalli <s-vadapalli@ti.com> says:
Hello,
This series re-enables MUX_MMIO at U-Boot proper on J721E and J7200
SoCs. The commits which introduced support for Hyperflash boot on both
of these SoCs disabled MUX_MMIO functionality at U-Boot proper, thereby
introducing a regression.
Series is based on commit 2b1c8d3b2d cmd: Fix Kconfig coding style
of the master branch of U-Boot.
configs: j7200_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree. On J7200
SoC, PCIe functionality is broken since commit under fixes.
configs: j721e_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree.
Wadim Egorov [Wed, 5 Feb 2025 04:30:11 +0000 (05:30 +0100)]
arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c
Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM
are accessible across all stages. This enables reading the SoM
configuration at any point during the boot process.
Tom Rini [Fri, 7 Feb 2025 19:12:50 +0000 (13:12 -0600)]
Azure: Add missing "set -e" to docs job
Without setting the shell flag to exit immediately when a command exists
with a non-zero status we can have the situation where the htmldocs
target fails with an error but the job will succeed due to infodocs
passing and being the last build target.
Tom Rini [Fri, 7 Feb 2025 19:35:32 +0000 (13:35 -0600)]
Merge patch series "cmd/setexpr: support concatenation of direct strings"
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
cmd/setexpr: support concatenation of direct strings
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
test: remove available memory check in setexpr_test_str_oper()
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
test: remove available memory check in setexpr_test_str()
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heiko Schocher [Tue, 28 Jan 2025 13:52:46 +0000 (14:52 +0100)]
led: add function naming option from linux
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Heiko Schocher [Tue, 28 Jan 2025 13:52:45 +0000 (14:52 +0100)]
doc: remove redundant leds bindings
remove file doc/device-tree-bindings/leds/common.txt
as we have this now already in
dts/upstream/include/dt-bindings/leds/common.h
which is imported from linux.
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Liya Huang [Tue, 28 Jan 2025 13:31:49 +0000 (21:31 +0800)]
arm: Correct dependency for STATIC_MACH_TYPE
Kconfig should not display the STATIC_MACH_TYPE option when
SUPPORT_PASSING_ATAGS is not selected. For example, when using most
platforms with menuconfig, it shows the STATIC_MACH_TYPE option causing
confusion. As we know, this should not occur when SUPPORT_PASSING_ATAGS
is not selected
[trini: Reword commit message] Signed-off-by: Liya Huang <1425075683@qq.com>
Benjamin Szőke [Tue, 4 Feb 2025 20:56:17 +0000 (21:56 +0100)]
zynqmp: Save "bootseq" environment variable in decimal format
In U-Boot, most of mmc releated commands uses decimal value in arguments, like
"mmc dev ${bootseq}" or "bootargs=root=/dev/mmcblk${bootseq}p2". In order to
improve compatibilities, export "bootseq" number to environment variable in
decimal format instead of hex.
Michal Simek [Tue, 4 Feb 2025 08:53:41 +0000 (09:53 +0100)]
arm64: zynqmp: Describe images without TF-A
U-Boot can run out of EL3, NS-EL2 and NS-EL1. Currently default
configuration is NS-EL2 with TF-A but when TF-A is not passed and
configured images can still boot just fine. That's why support this
configuration and describe it via binman.
Michal Simek [Tue, 4 Feb 2025 08:53:40 +0000 (09:53 +0100)]
arm64: zynqmp: Use DTB address base from .config
CONFIG_XILINX_OF_BOARD_DTB_ADDR holds DTB address which U-Boot is checking.
Currently address in binman match default value but macro can be used
directly.
Also sync node name (s/hash-1/hash/) and sync location to have the same
order load/hash/image.
All binman DTSes are compiled that's why also guard
CONFIG_XILINX_OF_BOARD_DTB_ADDR which depends on OF_BOARD || OF_SEPARATE
which is a problem for mini configurations which are using OF_EMBED.
Michal Simek [Tue, 4 Feb 2025 08:53:39 +0000 (09:53 +0100)]
arm64: zynqmp: Fix TEE loading address and add hash
There is incorrect loading address listed for TEE.
CONFIG_BL32_LOAD_ADDR should be used.
Also there is missing hash for this entry which is present for other nodes.
Padmarao Begari [Mon, 3 Feb 2025 09:04:09 +0000 (14:34 +0530)]
configs: versal: update initial stack pointer
The mini u-boot is hanging because of an initial stack
pointer address is used at half of the memory, when mini
u-boot is called reloc_fdt() function and doing memcpy()
for the fdt before relocation, and there is no sufficient
memory for the stack pointer. To fix, set an initial stack
pointer address to near the top of memory. The new stack
pointer address is assigned before calling the relocate
of u-boot based on the stack relocate calculation and
this new stack pointer is used while executing u-boot
from the relocated memory.
Ibai Erkiaga [Tue, 21 Jan 2025 13:01:31 +0000 (13:01 +0000)]
fpga: improve loads usage information
Current usage information for loads command is too verbose and long for
a command usage prompt. This flag simplifies the text for readability
purposes.
Ibai Erkiaga [Tue, 21 Jan 2025 13:01:30 +0000 (13:01 +0000)]
fpga: fix alignment on fpga cmd usage info
The current implementation generates some alignment issues as well as
some overlapping when all the fpga command options are enabled. The fix
is intended to improve readability of the usage info.
Alexander Dahl [Tue, 21 Jan 2025 16:22:12 +0000 (17:22 +0100)]
fpga: Avoid ignored-qualifiers warning
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Michal Simek [Tue, 21 Jan 2025 13:41:49 +0000 (14:41 +0100)]
arm64: zynqmp: Describe ethernet controllers via aliases on SOM
Add ethernet aliases to CC (Carrier card) description to create a
connection which is used by fdt_fixup_ethernet() for updating
local-mac-address in DT.
On Kria SOM MAC address is read from i2c eeprom at start and based on it
environment variables are created. Without creating aliases U-Boot is not
able to inject local-mac-address DT property and OS won't get the same MAC
address unless another i2c read is happening in OS.
Also aliases are using string not phandle that's why full path has to be
provided but that shouldn't be a big issue because location of ethernet
controller is fixed.
Prasad Kummari [Tue, 21 Jan 2025 12:24:59 +0000 (13:24 +0100)]
arm64: zynqmp: enable u-boot itb generation via binman if SPL is enabled
Output images are generated via Binman only if SPL is enabled, as
there is no consumer for them otherwise. An #ifdef check ensures that
when SPL is enabled, Binman generates the U-Boot ITB. If SPL is disabled,
ITB generation is skipped since the ITB format is supported only by SPL.
Without SPL, generating such an image is unnecessary, as it would not be
used
The second reason is that when a DTB is passed, the current logic cannot
handle it without an additional step in U-Boot to parse an appended FIT
image and enable board-specific code to select the correct DTB config.
The MULTI_DTB_FIT configuration should be used if support for multiple
DTBs is required, but SPL is not being used.
Michal Simek [Mon, 20 Jan 2025 13:33:47 +0000 (14:33 +0100)]
xilinx: Remove SYS_MALLOC_F_LEN setup via board Kconfig
The commit e05689242238 ("Kconfig: Change SYS_MALLOC_F_LEN default to
0x2000") already setup default values from board Kconfigs that's why no
reason to duplicate it again.
Prasad Kummari [Tue, 7 Jan 2025 12:29:15 +0000 (17:59 +0530)]
configs: zynqmp: Add usb_pgood_delay for SOM boards
Add usb_pgood_delay to ensure proper detection of USB devices.
Increase the USB power good delay on the SOM boards, as this
is required for certain USB sticks otherwise, they may not
be detected.
If the least significant bit of the address is set to one when
using the DDR protocol for data transfer then the results are
indeterminate for few flash devices. To fix this the least
significant bit of the address is set to zero.
Sam Protsenko [Thu, 16 Jan 2025 23:01:30 +0000 (17:01 -0600)]
board: samsung: e850-96: Provide bootstd default env
Add default environment variables needed for Standard Boot enablement as
described in [1]. Also rework the eMMC partition table for Linux boot so
it only has two partitions:
Both partitions are made bootable so that 'bootflow' command can detect
all loader files (rootfs might contain extlinux.conf and boot.scr).
'ldfw' partition is removed too, as ldfw.bin can be loaded from ESP now
(from /EFI/firmware/ldfw.bin).
Android partitons will be added later, once Android boot is actually
enabled for E850-96.
Notes:
- $kernel_comp_addr_r uses the same address (0x88000000) as LDFW
buffer (in board/samsung/e850-96/fw.c), but that's fine, as LDFW
will be copied to another RAM location (Secure World) by SMC
command, so it's only used temporarily on startup
- addition assignment (+=) operation is used for $partitions to avoid
spaces added by newlines, so that $partitions can be used in the
shell with no quotes
Now it's possible to successfully automatically boot Debian rootfs:
=> env default -f -a
=> env save
=> gpt write mmc 0 $partitions
=> reset
[1] doc/develop/bootstd/overview.rst
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
LDFW firmware loading can fail, e.g. in case if user forgot to upload
the binary to the appropriate location (/EFI/firmware/ldfw.bin on ESP
partition). Report such errors explicitly, so that the user can notice
it early and take necessary actions. But don't return error code from
board_init() in this case, as LDFW firmware is not mandatory for board
operation and is only required for some features like TRNG.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Sam Protsenko [Thu, 16 Jan 2025 23:01:28 +0000 (17:01 -0600)]
board: samsung: e850-96: Load LDFW from EFI partition
In case when EFI System Partition is present it can be used to store
firmware binaries, instead of keeping those on separate dedicated
partitions. That simplifies the partition table and makes it more
standard. Rework the firmware loader code to look for LDFW binary at
/EFI/firmware/ldfw.bin on ESP first, and if either the partition or the
file doesn't exist -- fallback to reading it from 'ldfw' partition. This
way backward compatibility can be kept, and Android partition tables
without ESP partition can be handled too.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Sam Protsenko [Thu, 16 Jan 2025 23:01:27 +0000 (17:01 -0600)]
configs: e850-96: Enable Standard Boot
Enable Standard Boot on E850-96 as documented in [1]. Along with
corresponding changes in the default environment and properly prepared
eMMC partitions (ESP and rootfs), it makes it possible to boot Debian
rootfs automatically. All boot methods were tested: efi_mgr, efi,
syslinux and script. The preferred boot method is efi_mgr, which relies
on the configured EFI variables (stored in /ubootefi.var file on ESP
partition), which boots either GRUB from /EFI/debian/grubaa64.efi, or
systemd-boot from /EFI/BOOT/BOOTAA64.EFI. Currently used boot sequence:
Sam Protsenko [Thu, 16 Jan 2025 23:01:26 +0000 (17:01 -0600)]
configs: e850-96: Enable more EFI features
The basic EFI support is already enabled by EFI_LOADER. Follow
SystemReady IR recommendations [1,2] for U-Boot and enable support for
more EFI features. That includes:
- CONFIG_CMD_BOOTEFI_SELFTEST: support for "bootefi selftest" command
- CONFIG_CMD_NVEDIT_EFI: support for "env -e" to explore EFI vars
- CONFIG_CMD_EFIDEBUG: support for "efidebug" command
Sam Protsenko [Thu, 16 Jan 2025 23:01:25 +0000 (17:01 -0600)]
configs: e850-96: Enable U-Boot environment on eMMC
Store U-Boot environment in BOOT2 HW area of eMMC (/dev/mmcblk0boot1),
as it's currently unused. BOOT1 area will be probably used for storing
low-level bootloaders further, so let's not touch it.
Both primary and redundant environments work fine:
=> env default -f -a
## Resetting to default environment
=> env save
Saving Environment to MMC... Writing to redundant MMC(0)... OK
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Marek Vasut [Fri, 31 Jan 2025 01:19:57 +0000 (02:19 +0100)]
arm64: renesas: Add R-Car S4 Starter Kit support
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support.
This implementation natively uses OF_UPSTREAM to pull in most recent
DT. The defconfig is derived from S4 Spider, with reduced UART baud
rate to 921600 Bdps. The DT alias to rswitch is removed as the alias
should point to rswitch ports, not to rswitch itself, see [1].
Marek Vasut [Wed, 29 Jan 2025 21:54:50 +0000 (22:54 +0100)]
remoteproc: renesas: Synchronize caches across cores
Explicitly flush icache on the CR52 core before jumping to the next
stage software to make sure it does not contain any invalid content.
Explicitly flash and invalidate dcache on the CA76 core both over the
trampoline buffer and over the CR52 firmware, and then trigger full
system synchronization, to make sure the data surely land in DRAM,
from where the CR52 can surely pick them up.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Wed, 29 Jan 2025 20:47:12 +0000 (14:47 -0600)]
Gitlab: Add results.xml to the list of artifacts as well.
Whereas with Azure the JUnit results file is available for download,
Gitlab doesn't default to including it as an artifact to download and
only makes it available via its own JUnit parser. Fix this by listing it
as an artifact to save as well.
Liya Huang [Tue, 28 Jan 2025 01:13:16 +0000 (09:13 +0800)]
examples: fix building on arm32
Refer to the commit a3c101a61348 ("examples: fix building on arm64")
fix for arm32. crt0.S does not even build with:
operating system and architecture:
5.15.0-130-generic x86_64
installed version of gcc and binutils:
gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.3)
GNU ld (GNU Binutils for Ubuntu) 2.34
used defconfig:
stm32h750-art-pi_defconfig
used commands for building:
export CROSS_COMPILE=arm-none-eabi- ARCH=arm
make stm32h750-art-pi_defconfig
make menuconfig # to add
make
examples/api/crt0.S: Assembler messages:
examples/api/crt0.S:32: Error: lo register required -- `ldr ip,=search_hint'
examples/api/crt0.S:33: Error: lo register required -- `str sp,[ip]'
examples/api/crt0.S:39: Error: lo register required -- `ldr ip,=syscall_ptr'
examples/api/crt0.S:40: Error: lo register required -- `ldr pc,[ip]'
make[2]: *** [scripts/Makefile.build:292：examples/api/crt0.o] Error 1
CONFIG_STANDALONE_LOAD_ADDR has been used for examples/standalone
but not for examples/api.
The suitability of an address to load an ELF binary and run it does
not only depend on the architecture but also on the memory layout of
the board which is not reflected in the default value of
CONFIG_STANDALONE_LOAD_ADDR.
Commit 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig")
set the default on RISC-V to 0x0 though most boards used 0x80200000
before the patch.
On most boards we can assume 8 MiB of memory available above $loadaddr.
So we can safely use $loadaddr + 4 MiB as load address for the standalone
example and eliminate CONFIG_STANDALONE_LOAD_ADDR altogether.
Fixes: 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Quentin Schulz [Wed, 22 Jan 2025 15:53:15 +0000 (16:53 +0100)]
image: apply FDTOs on FDT image node without a load property
A FIT image which is NOT using -E when created by mkimage - that is with
image data within the FIT - will fail to apply FDTO if the base FDT
image node does not specify a load property (which points to an address
in DRAM). This is because we check that the FDT address we want to apply
overlay to (i.e. modify and likely increase in size) is not inside the
FIT and give up otherwise. This is assumed necessary because we may then
overwrite other data when applying in-place.
However, we can do better than giving up: relocating the FDT in another
place in DRAM where it's safe to increase its size and apply FDTOs.
While at it, do not discriminate anymore on whether the data is within
the FIT data address space - that is FIT images created with mkimage -E
- as that still may be susceptible to unintended data overwrites as
mkimage -E simply concatenates all blobs after the FIT. If the FDT blob
isn't the last, it'll result in overwriting later blobs when resizing.
The side effect is that the load property in the FIT is only
temporarily used to load the FDT but then relocated right before we
start applying overlays.
Suggested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Tom Rini [Tue, 4 Feb 2025 16:23:02 +0000 (10:23 -0600)]
Merge patch series "mediatek: final preparation for OF_UPSTREAM support"
Christian Marangi <ansuelsmth@gmail.com> says:
This is the last batch of part to push actual support of
OF_UPSTREAM for the mediatek SoC.
The plan is to make the current downstream DTS on part with
upstream implementation so we can permit a gradual transition to
it while we don't cause any regression to any user.
This is to have the same node downstream and upstream.
Mediatek is working hard upstream to also push all the remaining
nodes.
All patch are the final changes after the pinctrl patch
merged previously.
Tom Rini [Mon, 3 Feb 2025 22:01:44 +0000 (16:01 -0600)]
Merge patch series "vbe: Series part G"
Simon Glass <sjg@chromium.org> says:
This includes the VBE ABrec (A/B/recovery) implementation as well as a
number of patches needed to make it work:
- marking some code as used by SPL_RELOC
- selection of images from a FIT based on the boot phase
- removal of unwanted hash code which increases code-size too much
- a few Kconfig-related additions for VPL
Note: The goal for the next series (part H) is to enable VBE on
rk3399-generic, i.e. able to boot on multiple rk3399-based boards with
only the TPL phase being different for each board.
projects / thirdparty / u-boot.git / log
