Jani Nikula [Wed, 18 Jun 2025 15:51:37 +0000 (18:51 +0300)]
drm/i915/vrr: fix register file style
Fix indents, use of spaces vs. tabs, grouping, remove superfluous
comments, remove some line continuations, wrap macro arguments in
parens, rename dev_priv to display. This is the way.
WCL added a c10 phy connected to port B. PTL code is currently
restricting c10 to phy_a only.
PTL doesn't have a PHY connected to PORT B; as such,there will
never be a case where PTL uses PHY B.
WCL uses PORT A and B with the C10 PHY.Reusing the condition
for WCL and extending it for PORT B should not cause any issues
for PTL.
-v2: Reuse and extend PTL condition for WCL (Matt)
Matt Atwood [Fri, 13 Jun 2025 19:31:41 +0000 (01:01 +0530)]
drm/i915/xe3lpd: Update bandwidth parameters for display version 30.02
Bandwidth parameters for WCL have been updated with respect to
previous display releases. Encode them into xe3lpd_3002_sa_info and use
that new struct.
-v2: Resolve conflict to apply patch.
Bspec: 68859 Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250613193146.3549862-5-dnyaneshwar.bhadane@intel.com
Ville Syrjälä [Thu, 12 Jun 2025 14:50:18 +0000 (17:50 +0300)]
drm/i915/dsb: Disable the GOSUB interrupt
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:17 +0000 (17:50 +0300)]
drm/i915/dsb: Move the DSB_PMCTRL* reset out of intel_dsb_finish()
When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:16 +0000 (17:50 +0300)]
drm/i915/dsb: Garbage collect the MMIO DEwake stuff
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:15 +0000 (17:50 +0300)]
drm/i915/dsb: Introduce intel_dsb_exec_time_us()
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:13 +0000 (17:50 +0300)]
drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Ville Syrjälä [Fri, 14 Mar 2025 15:01:36 +0000 (17:01 +0200)]
drm/i915/dsi: Assert that vfp+vsync+vbp == vtotal on BXT/GLK
Windows code seems to do some dodgy looking +/-1 adjustments
to some of the vertical timings. Not sure if that's correct
or not, but let's at least cross check some of the values
we got from the hardware to double check whether the GOP
did the same or not.
Imre Deak [Mon, 9 Jun 2025 12:55:56 +0000 (15:55 +0300)]
drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. The only known problematic
monitor is an external SST sink, so keep the quirk disabled always for
eDP and MST sinks. Reenable the quirk after a hotplug event and after
resuming from a power state without hotplug support, until the
subsequent EDID based detection.
v2: Add a helper for determining the need/setting the probing. (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250609125556.109538-2-imre.deak@intel.com
Imre Deak [Mon, 9 Jun 2025 12:55:55 +0000 (15:55 +0300)]
drm/dp: Add an EDID quirk for the DPCD register access probe
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Imre Deak [Thu, 5 Jun 2025 08:28:48 +0000 (11:28 +0300)]
drm/edid: Add support for quirks visible to DRM core and drivers
Add support for EDID based quirks which can be queried outside of the
EDID parser iteself by DRM core and drivers. There are at least two such
quirks applicable to all drivers: the DPCD register access probe quirk
and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in
the v2.1a DP Standard). The latter quirk applies to panels with specific
EDID panel names, support for defining a quirk this way will be added as
a follow-up.
v2: Reset global_quirks in drm_reset_display_info().
v3: (Jani)
- Use one list for both the global and internal quirks.
- Drop change for panel name specific quirks.
- Add comment about the way quirks should be queried.
Imre Deak [Thu, 5 Jun 2025 08:28:47 +0000 (11:28 +0300)]
drm/edid: Define the quirks in an enum list
An enum list is better suited to define a quirk list, do that. This
makes looking up a quirk more robust and also allows for separating
quirks internal to the EDID parser and global quirks which can be
queried outside of the EDID parser (added as a follow-up).
Imre Deak [Thu, 5 Jun 2025 08:28:46 +0000 (11:28 +0300)]
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
We cannot yet use xe->display to determine whether display hardware
has been successfully probed/initialized or not. This is because
xe->display would not be set to NULL even with GPUs with no display
capabilities (e.g, GMD_ID_DISPLAY = 0). However, this might change
in the future as Xe and i915 code is unified to deal with no display
cases.
Therefore, for now we have to continue to rely on xe->info.probe_display
(which would be set to false with display-less GPUs) to decide
whether to invoke any display related functions or not.
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250605054247.386633-1-vivek.kasireddy@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Fri, 6 Jun 2025 10:22:56 +0000 (13:22 +0300)]
drm/i915: split out display register macros to a separate file
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Linus Torvalds [Sun, 8 Jun 2025 18:33:00 +0000 (11:33 -0700)]
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Linus Torvalds [Sun, 8 Jun 2025 18:27:20 +0000 (11:27 -0700)]
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Zhang Rui [Fri, 30 May 2025 00:09:28 +0000 (08:09 +0800)]
tools/power turbostat: Avoid probing the same perf counters
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Sat, 17 May 2025 09:44:50 +0000 (17:44 +0800)]
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: Add Android support for MSR device handling
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sun, 8 Jun 2025 18:07:33 +0000 (11:07 -0700)]
Merge tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Linus Torvalds [Sun, 8 Jun 2025 18:02:53 +0000 (11:02 -0700)]
Merge tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Linus Torvalds [Sun, 8 Jun 2025 17:35:12 +0000 (10:35 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Linus Torvalds [Sun, 8 Jun 2025 17:20:21 +0000 (10:20 -0700)]
Merge tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Linus Torvalds [Sun, 8 Jun 2025 15:19:01 +0000 (08:19 -0700)]
Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
Linus Torvalds [Sat, 7 Jun 2025 17:05:35 +0000 (10:05 -0700)]
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Linus Torvalds [Sat, 7 Jun 2025 17:00:03 +0000 (10:00 -0700)]
Merge tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Linus Torvalds [Sat, 7 Jun 2025 16:56:18 +0000 (09:56 -0700)]
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
Linus Torvalds [Sat, 7 Jun 2025 16:40:08 +0000 (09:40 -0700)]
Merge tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Linus Torvalds [Sat, 7 Jun 2025 14:24:07 +0000 (07:24 -0700)]
Merge tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
Mike Rapoport [Sat, 17 May 2025 09:30:48 +0000 (12:30 +0300)]
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/ Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Thomas Huth [Fri, 14 Mar 2025 07:10:03 +0000 (08:10 +0100)]
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: linux-sh@vger.kernel.org Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Al Viro [Wed, 4 Jun 2025 16:27:08 +0000 (12:27 -0400)]
do_change_type(): refuse to operate on unmounted/not ours mounts
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 2 Jun 2025 00:11:06 +0000 (20:11 -0400)]
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org> Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 7 Jun 2025 05:06:57 +0000 (22:06 -0700)]
Merge tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
Linus Torvalds [Sat, 7 Jun 2025 04:45:45 +0000 (21:45 -0700)]
Merge tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
Al Viro [Fri, 6 Jun 2025 22:31:03 +0000 (18:31 -0400)]
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
... and fix the breakage in anon-to-anon case. There are two cases
acceptable for do_move_mount() and mixing checks for those is making
things hard to follow.
One case is move of a subtree in caller's namespace.
* source and destination must be in caller's namespace
* source must be detachable from parent
Another is moving the entire anon namespace elsewhere
* source must be the root of anon namespace
* target must either in caller's namespace or in a suitable
anon namespace (see may_use_mount() for details).
* target must not be in the same namespace as source.
It's really easier to follow if tests are *not* mixed together...
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 3b5260d12b1f ("Don't propagate mounts into detached trees") Reported-by: Allison Karlitskaya <lis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs: allow clone_private_mount() for a path on real rootfs
Mounting overlayfs with a directory on real rootfs (initramfs)
as upperdir has failed with following message since commit db04662e2f4f ("fs: allow detached mounts in clone_private_mount()").
[ 4.080134] overlayfs: failed to clone upperpath
Overlayfs mount uses clone_private_mount() to create internal mount
for the underlying layers.
The commit made clone_private_mount() reject real rootfs because
it does not have a parent mount and is in the initial mount namespace,
that is not an anonymous mount namespace.
This issue can be fixed by modifying the permission check
of clone_private_mount() following [1].
Al Viro [Tue, 3 Jun 2025 21:57:27 +0000 (17:57 -0400)]
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
9ffb14ef61ba "move_mount: allow to add a mount into an existing group"
breaks assertions on ->mnt_share/->mnt_slave. For once, the data structures
in question are actually documented.
Documentation/filesystem/sharedsubtree.rst:
All vfsmounts in a peer group have the same ->mnt_master. If it is
non-NULL, they form a contiguous (ordered) segment of slave list.
do_set_group() puts a mount into the same place in propagation graph
as the old one. As the result, if old mount gets events from somewhere
and is not a pure event sink, new one needs to be placed next to the
old one in the slave list the old one's on. If it is a pure event
sink, we only need to make sure the new one doesn't end up in the
middle of some peer group.
"move_mount: allow to add a mount into an existing group" ends up putting
the new one in the beginning of list; that's definitely not going to be
in the middle of anything, so that's fine for case when old is not marked
shared. In case when old one _is_ marked shared (i.e. is not a pure event
sink), that breaks the assumptions of propagation graph iterators.
Put the new mount next to the old one on the list - that does the right thing
in "old is marked shared" case and is just as correct as the current behaviour
if old is not marked shared (kudos to Pavel for pointing that out - my original
suggested fix changed behaviour in the "nor marked" case, which complicated
things for no good reason).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 9ffb14ef61ba ("move_mount: allow to add a mount into an existing group") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 4 May 2025 17:28:37 +0000 (13:28 -0400)]
finish_automount(): don't leak MNT_LOCKED from parent to child
Intention for MNT_LOCKED had always been to protect the internal
mountpoints within a subtree that got copied across the userns boundary,
not the mountpoint that tree got attached to - after all, it _was_
exposed before the copying.
For roots of secondary copies that is enforced in attach_recursive_mnt() -
MNT_LOCKED is explicitly stripped for those. For the root of primary
copy we are almost always guaranteed that MNT_LOCKED won't be there,
so attach_recursive_mnt() doesn't bother. Unfortunately, one call
chain got overlooked - triggering e.g. NFS referral will have the
submount inherit the public flags from parent; that's fine for such
things as read-only, nosuid, etc., but not for MNT_LOCKED.
This is particularly pointless since the mount attached by finish_automount()
is usually expirable, which makes any protection granted by MNT_LOCKED
null and void; just wait for a while and that mount will go away on its own.
Include MNT_LOCKED into the set of flags to be ignored by do_add_mount() - it
really is an internal flag.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 1 Jun 2025 18:02:26 +0000 (14:02 -0400)]
path_overmount(): avoid false negatives
Holding namespace_sem is enough to make sure that result remains valid.
It is *not* enough to avoid false negatives from __lookup_mnt(). Mounts
can be unhashed outside of namespace_sem (stuck children getting detached
on final mntput() of lazy-umounted mount) and having an unrelated mount
removed from the hash chain while we traverse it may end up with false
negative from __lookup_mnt(). We need to sample and recheck the seqlock
component of mount_lock...
Bug predates the introduction of path_overmount() - it had come from
the code in finish_automount() that got abstracted into that helper.
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 26df6034fdb2 ("fix automount/automount race properly") Fixes: 6ac392815628 ("fs: allow to mount beneath top mount") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Yao Zi [Thu, 5 Jun 2025 12:34:46 +0000 (20:34 +0800)]
platform/loongarch: laptop: Add backlight power control support
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
Linus Torvalds [Sat, 7 Jun 2025 01:02:37 +0000 (18:02 -0700)]
Merge tag 's390-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add missing select CRYPTO_ENGINE to CRYPTO_PAES_S390
- Fix secure storage access exception handling when fault handling is
disabled
* tag 's390-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix in_atomic() handling in do_secure_storage_access()
s390/crypto: Select crypto engine in Kconfig when PAES is chosen
Linus Torvalds [Sat, 7 Jun 2025 00:56:19 +0000 (17:56 -0700)]
Merge tag 'ceph-for-6.16-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- a one-liner that leads to a startling (but also very much rational)
performance improvement in cases where an IMA policy with rules that
are based on fsmagic matching is enforced
- an encryption-related fixup that addresses generic/397 and other
fstest failures
- a couple of cleanups in CephFS
* tag 'ceph-for-6.16-rc1' of https://github.com/ceph/ceph-client:
ceph: fix variable dereferenced before check in ceph_umount_begin()
ceph: set superblock s_magic for IMA fsmagic matching
ceph: cleanup hardcoded constants of file handle size
ceph: fix possible integer overflow in ceph_zero_objects()
ceph: avoid kernel BUG for encrypted inode with unaligned file size
Linus Torvalds [Sat, 7 Jun 2025 00:54:09 +0000 (17:54 -0700)]
Merge tag 'ovl-update-v2-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a regression in getting the path of an open file (e.g. in
/proc/PID/maps) for a nested overlayfs setup (André Almeida)
- Support data-only layers and verity in a user namespace (unprivileged
composefs use case)
- Fix a gcc warning (Kees)
- Cleanups
* tag 'ovl-update-v2-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Annotate struct ovl_entry with __counted_by()
ovl: Replace offsetof() with struct_size() in ovl_stack_free()
ovl: Replace offsetof() with struct_size() in ovl_cache_entry_new()
ovl: Check for NULL d_inode() in ovl_dentry_upper()
ovl: Use str_on_off() helper in ovl_show_options()
ovl: don't require "metacopy=on" for "verity"
ovl: relax redirect/metacopy requirements for lower -> data redirect
ovl: make redirect/metacopy rejection consistent
ovl: Fix nested backing file paths
Steven Rostedt [Thu, 5 Jun 2025 20:21:06 +0000 (16:21 -0400)]
tracing: PM: Remove unused clock events
The events clock_enable, clock_disable, and clock_set_rate were added back
in 2010. In 2011 they were used by the arm architecture but removed in
2013. These events add around 7K of memory which was wasted for the last 12
years.
Remove them.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kajetan Puchalski <kajetan.puchalski@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/20250605162106.1a459dad@gandalf.local.home Fixes: 74704ac6ea402 ("tracing, perf: Add more power related events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Dmitry Antipov [Fri, 6 Jun 2025 11:22:42 +0000 (14:22 +0300)]
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
Enlarge the critical section in ring_buffer_subbuf_order_set() to
ensure that error handling takes place with per-buffer mutex held,
thus preventing list corruption and other concurrency-related issues.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Link: https://lore.kernel.org/20250606112242.1510605-1-dmantipov@yandex.ru Reported-by: syzbot+05d673e83ec640f0ced9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=05d673e83ec640f0ced9 Fixes: f9b94daa542a8 ("ring-buffer: Set new size of the ring buffer sub page") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Sat, 7 Jun 2025 00:20:20 +0000 (20:20 -0400)]
tracing: Fix regression of filter waiting a long time on RCU synchronization
When faultable trace events were added, a trace event may no longer use
normal RCU to synchronize but instead used synchronize_rcu_tasks_trace().
This synchronization takes a much longer time to synchronize.
The filter logic would free the filters by calling
tracepoint_synchronize_unregister() after it unhooked the filter strings
and before freeing them. With this function now calling
synchronize_rcu_tasks_trace() this increased the time to free a filter
tremendously. On a PREEMPT_RT system, it was even more noticeable.
# time trace-cmd record -p function sleep 1
[..]
real 2m29.052s
user 0m0.244s
sys 0m20.136s
As trace-cmd would clear out all the filters before recording, it could
take up to 2 minutes to do a recording of "sleep 1".
To find out where the issues was:
~# trace-cmd sqlhist -e -n sched_stack select start.prev_state as state, end.next_comm as comm, TIMESTAMP_DELTA_USECS as delta, start.STACKTRACE as stack from sched_switch as start join sched_switch as end on start.prev_pid = end.next_pid
Which will produce the following commands (and -e will also execute them):
The above creates a synthetic event that creates a stack trace when a task
schedules out and records it with the time it scheduled back in. Basically
the time a task is off the CPU. It also records the state of the task when
it left the CPU (running, blocked, sleeping, etc). It also saves the comm
of the task as "comm" (needed for the next command).
~# echo 'hist:keys=state,stack.stacktrace:vals=delta:sort=state,delta if comm == "trace-cmd" && state & 3' > /sys/kernel/tracing/events/synthetic/sched_stack/trigger
The above creates a histogram with buckets per state, per stack, and the
value of the total time it was off the CPU for that stack trace. It filters
on tasks with "comm == trace-cmd" and only the sleeping and blocked states
(1 - sleeping, 2 - blocked).
Linus Torvalds [Fri, 6 Jun 2025 20:20:26 +0000 (13:20 -0700)]
Merge tag 'regulator-fix-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A very minor fix that came in during the merge window, checking for
I/O errors in the MAX14577 driver"
* tag 'regulator-fix-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Add error check for max14577_read_reg()
Linus Torvalds [Fri, 6 Jun 2025 20:16:50 +0000 (13:16 -0700)]
Merge tag 'pwm/for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"axi-pwmgen: Fix handling of external clock
The pwm-axi-pwmgen device is backed by an FPGA and can be synthesized
in different ways. Relevant here is that it can use one or two
external clock signals. These fix clock handling for the two clocks
case"
* tag 'pwm/for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: fix missing separate external clock
dt-bindings: pwm: adi,axi-pwmgen: Fix clocks
Linus Torvalds [Fri, 6 Jun 2025 20:12:50 +0000 (13:12 -0700)]
Merge tag 'block-6.16-20250606' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
Linus Torvalds [Fri, 6 Jun 2025 20:09:03 +0000 (13:09 -0700)]
Merge tag 'io_uring-6.16-20250606' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a regression introduced in this merge window, where the 'id'
passed to xa_find() for ifq lookup is uninitialized
- Fix for zcrx release on registration failure. From 6.15, going to
stable
- Tweak for recv bundles, where msg_inq should be > 1 before being used
to gate a retry event
- Pavel doesnt want to be a maintainer anymore, remove him from the
MAINTAINERS entry
- Limit legacy kbuf registrations to 64k, which is the size of the
buffer ID field anyway. Hence it's nonsensical to support more than
that, and the only purpose that serves is to have syzbot trigger long
exit delays for heavily configured debug kernels
- Fix for the io_uring futex handling, which got broken for
FUTEX2_PRIVATE by a generic futex commit adding private hashes
* tag 'io_uring-6.16-20250606' of git://git.kernel.dk/linux:
io_uring/futex: mark wait requests as inflight
io_uring/futex: get rid of struct io_futex addr union
io_uring/kbuf: limit legacy provided buffer lists to USHRT_MAX
MAINTAINERS: remove myself from io_uring
io_uring/net: only consider msg_inq if larger than 1
io_uring/zcrx: fix area release on registration failure
io_uring/zcrx: init id for xa_find
Linus Torvalds [Fri, 6 Jun 2025 19:45:35 +0000 (12:45 -0700)]
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
Linus Torvalds [Fri, 6 Jun 2025 19:32:02 +0000 (12:32 -0700)]
Merge tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
Linus Torvalds [Fri, 6 Jun 2025 18:50:47 +0000 (11:50 -0700)]
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
projects / thirdparty / kernel / linux.git / log
