Yuanjie Yang [Thu, 15 Jan 2026 09:27:45 +0000 (17:27 +0800)]
drm/msm/dpu: Add interrupt registers for DPU 13.0.0
DPU version 13.0.0 introduces changes to the interrupt register
layout. Update the driver to support these modifications for
proper interrupt handling.
Yuanjie Yang [Thu, 15 Jan 2026 09:27:43 +0000 (17:27 +0800)]
drm/msm/dsi/phy: Add support for Kaanapali
Add DSI PHY support for the Kaanapali platform, Kaanapali introduce
addition of DSI2/DSI2_phy compared to SM8650. However, based on the
HPG diagram, only DSI0_phy and DSI1_phy works.
Kaanapali introduces DPU 13.0.0 and DSI 2.10. Compared to SM8750,
Kaanapali has significant register changes, making it incompatible
with SM8750. So add MDSS/MDP display subsystem for Qualcomm Kaanapali.
Add DPU version 13.0 for Qualcomm Kaanapali Soc. The Kaanapali
DPU and SM8750 have significant differences, including additions
and removals of registers, as well as changes in register addresses.
Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698694/ Link: https://lore.kernel.org/r/20260115092749.533-2-yuanjie.yang@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Dmitry Baryshkov [Mon, 19 Jan 2026 12:16:40 +0000 (14:16 +0200)]
drm/msm/dpu: fix SSPP_UBWC_STATIC_CTRL programming on UBWC 5.x+
Code in dpu_hw_sspp_setup_format() doesn't handle UBWC versions bigger
than 4.0. Replace switch-case with if-else checks, making sure that the
register is initialized on UBWC 5.x (and later) hosts.
Fixes: c2577fc1740d ("drm/msm/dpu: Add support for SM8750") Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699280/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-4-0987acc0427f@oss.qualcomm.com
Dmitry Baryshkov [Mon, 19 Jan 2026 12:16:39 +0000 (14:16 +0200)]
drm/msm/dpu: program correct register for UBWC config on DPU 8.x+
Since DPU 8.0 there is a separate register for the second rectangle,
which needs to be programmed with the UBWC config if multirect is being
used. Write pipe's UBWC configuration to the correct register.
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699277/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-3-0987acc0427f@oss.qualcomm.com
Dmitry Baryshkov [Mon, 19 Jan 2026 12:16:38 +0000 (14:16 +0200)]
drm/msm/dpu: offset HBB values written to DPU by -13
As in all other places, the Highest Bank Bit value should be programmed
into the hardware with the offset of -13. Correct the value written
into the register to prevent unpredictable results.
Fixes: 227d4ce0b09e ("drm/msm: Offset MDSS HBB value by 13") Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699276/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-2-0987acc0427f@oss.qualcomm.com
Dmitry Baryshkov [Mon, 19 Jan 2026 12:16:37 +0000 (14:16 +0200)]
drm/msm/mdss: correct HBB programmed on UBWC 5.x and 6.x devices
As in the previous generations, on UBWC 5.x and 6.x devices the Highest
Bank Bit value should be programmed into the hardware with the offset of
-13. Correct the value written into the register to prevent
unpredictable results.
Fixes: 227d4ce0b09e ("drm/msm: Offset MDSS HBB value by 13") Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455 Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699274/ Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-1-0987acc0427f@oss.qualcomm.com
Swaraj Gaikwad [Mon, 15 Dec 2025 02:28:50 +0000 (02:28 +0000)]
drm/msm: Replace custom dumb_map_offset with generic helper
The msm driver implements a custom dumb_map_offset callback. This
implementation acquires the msm_gem_lock, but the underlying
drm_gem_create_mmap_offset() function is already thread-safe regarding
the VMA offset manager (it acquires the mgr->vm_lock internally).
Switching to the generic drm_gem_dumb_map_offset() helper provides
several benefits:
1. Removes the unnecessary locking overhead (locking leftovers).
2. Adds a missing check to reject mapping of imported objects, which is
invalid for dumb buffers.
3. Allows for the removal of the msm_gem_dumb_map_offset() wrapper and
the msm_gem_mmap_offset() helper function.
The logic from msm_gem_mmap_offset() has been inlined into
msm_ioctl_gem_info() to maintain functionality without the separate
helper.
This addresses the TODO:
"Documentation/gpu/todo.rst: Remove custom dumb_map_offset implementations"
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/694727/
Message-ID: <20251215022850.12358-1-swarajgaikwad1925@gmail.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Dmitry Baryshkov [Fri, 21 Nov 2025 16:13:04 +0000 (18:13 +0200)]
drm/msm/a2xx: add A225 entry to catalog
Add catalog entry for Adreno A225.6 as present on MSM8960v3. Most of the
pieces were already contributed by Jonathan Marek in commit 21af872cd8c6
("drm/msm/adreno: add a2xx"), but weren't enabled because there was no
GPU entry.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689908/
Message-ID: <20251121-a225-v1-2-a1bab651d186@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Konrad Dybcio [Mon, 29 Dec 2025 20:47:39 +0000 (21:47 +0100)]
dt-bindings: display/msm/gpu: Straighten out reg-names on A619L/610/702
These GPUs have physically have the same regions as the base case
("main" + "cx_mem" + "cx_dbgc"). Remove the specific override.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696547/
Message-ID: <20251229-topic-6115_2290_gpu_dbgc-v1-1-4a24d196389c@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Jie Zhang [Wed, 31 Dec 2025 08:45:25 +0000 (14:15 +0530)]
dt-bindings: display/msm/rgmu: Document A612 RGMU
RGMU a.k.a Reduced Graphics Management Unit is a small state machine
with the sole purpose of providing IFPC (Inter Frame Power Collapse)
support. Compared to GMU, it doesn't manage GPU clock, voltage
scaling, bw voting or any other functionalities. All it does is detect
an idle GPU and toggle the GDSC switch. As it doesn't access DDR space,
it doesn't require iommu.
So far, only Adreno 612 GPU has an RGMU core. Document it in
qcom,adreno-rgmu.yaml.
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696679/
Message-ID: <20251231-qcs615-spin-2-v6-4-da87debf6883@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Wed, 31 Dec 2025 08:45:24 +0000 (14:15 +0530)]
dt-bindings: display/msm: gpu: Document A612 GPU
A612 GPU has a new IP called RGMU (Reduced Graphics Management Unit)
which replaces GMU. But it doesn't do clock or voltage scaling. So we
need the gpu core clock in the GPU node along with the power domain to
do clock and voltage scaling from the kernel. Update the bindings to
describe this GPU.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696676/
Message-ID: <20251231-qcs615-spin-2-v6-3-da87debf6883@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
JSON Schema conditionals can become complex and error-prone when combined
with regex patterns. To improve readability and maintainability, replace
nested if-else blocks with a flattened structure using explicit enums.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696674/
Message-ID: <20251231-qcs615-spin-2-v6-2-da87debf6883@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Wed, 31 Dec 2025 08:45:22 +0000 (14:15 +0530)]
drm/msm/a6xx: Retrieve gmu core range by index
Some GPUs like A612 doesn't use a named register range resource. This
is because the reg-name property is discouraged when there is just a
single resource.
To address this, retrieve the 'gmu' register range by its index. It is
always guaranteed to be at index 0.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696673/
Message-ID: <20251231-qcs615-spin-2-v6-1-da87debf6883@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Rob Clark [Fri, 9 Jan 2026 15:37:29 +0000 (07:37 -0800)]
drm/msm: Fix GMEM_BASE for gen8
This should also be zero for gen8. This does change a7xx-gen1 to zero.
It was almost certainly incorrect before, but we have no such devices in
CI currently.
Fixes: 288a93200892 ("drm/msm/adreno: Introduce A8x GPU Support") Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/697779/
Message-ID: <20260109153730.130462-3-robin.clark@oss.qualcomm.com>
Johan Hovold [Sun, 21 Dec 2025 16:45:52 +0000 (17:45 +0100)]
drm/msm/a6xx: fix bogus hwcg register updates
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe66
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb245b ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e484 ("drm/msm/adreno: Add Adreno A690 support") Cc: stable@vger.kernel.org # 6.5 Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Fixes: 188db3d7fe66 ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Brian Masney [Thu, 8 Jan 2026 21:16:42 +0000 (16:16 -0500)]
drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()") Signed-off-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/697613/ Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-24-535a3ed73bf3@redhat.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Dmitry Baryshkov [Sun, 28 Dec 2025 04:02:29 +0000 (06:02 +0200)]
drm/msm/mdp5: drop support for MSM8998, SDM630 and SDM660
Currently MDP5 3.x (MSM8998, SDM630 and SDM660) platforms are support
by both DPU and MDP5 drivers. Support for them in the DPU driver is
mature enough, so it's no longer sensible to keep them enabled in the
MDP5 driver. Not to mention that MSM8998 never used an MDP5 compatible
string. Drop support for the MDP5 3.x genration inside the MDP5
driver and migrate those to the DPU driver only.
Note: this will break if one uses the DT generated before v6.3 as they
had only the generic, "qcom,mdp5" compatible string for SDM630 and
SDM660. However granted that we had two LTS releases inbetween I don't
think it is an issue.
Dmitry Baryshkov [Sun, 28 Dec 2025 04:02:28 +0000 (06:02 +0200)]
drm/msm/dpu: fix CMD panels on DPU 1.x - 3.x
DPU units before 4.x don't have a separate CTL_START IRQ to mark the
begin of the data transfer. In such a case, wait for the frame transfer
to complete rather than trying to wait for the CTL_START interrupt (and
obviously hitting the timeout).
Dmitry Baryshkov [Fri, 14 Nov 2025 03:43:39 +0000 (05:43 +0200)]
drm/msm/dpu: use standard functions in _dpu_format_populate_plane_sizes_ubwc()
The _dpu_format_populate_plane_sizes_ubwc() used MSM_MEDIA_ALIGN() and
MSM_MEDIA_ROUNDUP(), macros inherited from the previous implementation,
msm_media_info.h. Replace them with the standard Linux macros,
round_up() and DIV_ROUND_UP() respectively.
Dmitry Baryshkov [Fri, 14 Nov 2025 03:43:37 +0000 (05:43 +0200)]
drm/msm/dpu: drop redundant num_planes assignment in _dpu_format_populate_plane_sizes*()
Drop redundant layout->num_planes assignments, using the value assigned
from the formats table. RGB UBWC formats need special handling: they use
two planes (per the format table), but the uAPI defines plane[1] as
empty.
Move common bits of _dpu_format_populate_plane_sizes_ubwc() and
_linear() to dpu_format_populate_plane_sizes(), reducing unnecessary
duplication and simplifying code flow fror the UBWC function.
Dmitry Baryshkov [Fri, 14 Nov 2025 03:43:30 +0000 (05:43 +0200)]
drm/msm/disp: set num_planes, fetch_mode and tile_height in INTERLEAVED_RGB_FMT_TILED
All interleaved compressed RGB formats use only 2 planes,
MDP_FETCH_LINEAR and MDP_TILE_HEIGHT_UBWC. Specify num_planes,
fetch_mode and tile_height directly in the macro and remove unused
parameters.
Dmitry Baryshkov [Fri, 14 Nov 2025 03:43:29 +0000 (05:43 +0200)]
drm/msm/disp: set num_planes and fetch_mode in INTERLEAVED_RGB_FMT
All interleaved RGB formats use only 1 plane and MDP_FETCH_LINEAR.
Specify num_planes and fetch_mode directly in the macro and remove
unused parameters.
Dmitry Baryshkov [Fri, 14 Nov 2025 03:43:28 +0000 (05:43 +0200)]
drm/msm/disp: set num_planes to 1 for interleaved YUV formats
Interleaved YUV formats use only one plane for all pixel data. Specify
num_planes = 1 for those formats. This was left unnoticed since
_dpu_format_populate_plane_sizes_linear() overrides layout->num_planes.
Dan Carpenter [Thu, 8 Jan 2026 19:57:22 +0000 (22:57 +0300)]
drm/msm: remove some dead code
This is supposed to test for integer overflow but it is wrong and
unnecessary. The size_add()/mul() macros return SIZE_MAX when there is
an integer overflow. This code saves the SIZE_MAX to a u64 and then
tests if the result is greater than SIZE_MAX which it never will be.
Fortunately, when we try to allocate SIZE_MAX bytes the allocation
will fail. We even pass __GFP_NOWARN so the allocation fails
harmlessly and quietly.
Dale Whinham [Thu, 18 Dec 2025 00:19:32 +0000 (00:19 +0000)]
drm/msm/dp: Enable support for eDP v1.4+ link rates table
The MSM DRM driver currently does not support panels which report their
supported link rates via the SUPPORTED_LINK_RATES table.
For panels which do not offer the optional eDP v1.3 fallback via
MAX_LINK_RATE, this will cause a panel probe failure (e.g. Samsung
ATNA30DW01-1 as found in Microsoft Surface Pro 11).
Detect eDP v1.4 panels and parse the SUPPORTED_LINK_RATES table when
present.
Additionally, set the rate using LINK_RATE_SET instead of LINK_BW_SET,
but only if LINK_BW_SET hasn't already been written to.
Dmitry Baryshkov [Tue, 30 Dec 2025 07:17:57 +0000 (09:17 +0200)]
drm/msm/dpu: fix WD timer handling on DPU 8.x
Since DPU 8.x Watchdog timer settings were moved from the TOP to the
INTF block. Support programming the timer in the INTF block. Fixes tag
points to the commit which removed register access to those registers on
DPU 8.x+ (and which also should have added proper support for WD timer
on those devices).
Fixes: 43e3293fc614 ("drm/msm/dpu: add support for MDP_TOP blackhole") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696586/ Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-2-98203d150611@oss.qualcomm.com
Teguh Sobirin [Tue, 30 Dec 2025 07:17:56 +0000 (09:17 +0200)]
drm/msm/dpu: Set vsync source irrespective of mdp top support
Since DPU 5.x the vsync source TE setup is split between MDP TOP and
INTF blocks. Currently all code to setup vsync_source is only executed
if MDP TOP implements the setup_vsync_source() callback. However on
DPU >= 8.x this callback is not implemented, making DPU driver skip all
vsync setup. Move the INTF part out of this condition, letting DPU
driver to setup TE vsync selection on all new DPU devices.
Mahadevan P [Thu, 1 Jan 2026 05:04:38 +0000 (10:34 +0530)]
drm/msm/disp/dpu: add merge3d support for sc7280
On SC7280 targets, display modes with a width greater than the
max_mixer_width (2400) are rejected during mode validation when
merge3d is disabled. This limitation exists because, without a
3D merge block, two layer mixers cannot be combined(non-DSC interface),
preventing large layers from being split across mixers. As a result,
higher resolution modes cannot be supported.
Enable merge3d support on SC7280 to allow combining streams from
two layer mixers into a single non-DSC interface. This capability
removes the width restriction and enables buffer sizes beyond the
2400-pixel limit.
Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696713/ Link: https://lore.kernel.org/r/20260101-4k-v2-1-712ae3c1f816@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Ayushi Makhija [Sun, 4 Jan 2026 13:44:39 +0000 (19:14 +0530)]
dt-bindings: msm: dsi-controller-main: document the QCS8300 DSI CTRL
QCS8300 MDSS DSI controller reuses the same IP as SA8775P, with
identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to
`qcom,sa8775p-dsi-ctrl` to reflect this hardware reuse.
Ayushi Makhija [Sun, 4 Jan 2026 13:44:38 +0000 (19:14 +0530)]
dt-bindings: display: msm-dsi-phy-7nm: document the QCS8300 DSI PHY
QCS8300 uses the same 5nm MDSS DSI PHY IP as SA8775P, sharing
an identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to `qcom,sa8775p-dsi-phy-5nm`
to reflect this hardware reuse.
Evan Lambert [Wed, 24 Dec 2025 12:44:22 +0000 (12:44 +0000)]
drm/msm: Replace unsafe snprintf usage with scnprintf
The refill_buf function uses snprintf to append to a fixed-size buffer.
snprintf returns the length that would have been written, which can
exceed the remaining buffer size. If this happens, ptr advances beyond
the buffer and rem becomes negative. In the 2nd iteration, rem is
treated as a large unsigned integer, causing snprintf to write oob.
While this behavior is technically mitigated by num_perfcntrs being
locked at 5, it's still unsafe if num_perfcntrs were ever to change/a
second source was added.
Nikolay Kuratov [Thu, 11 Dec 2025 09:36:30 +0000 (12:36 +0300)]
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/ Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Randy Dunlap [Fri, 19 Dec 2025 18:46:38 +0000 (10:46 -0800)]
drm/msm: msm_iommu.c: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:381 expecting prototype for
alloc_pt(). Prototype was for msm_iommu_pagetable_alloc_pt() instead
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:426 expecting prototype for
free_pt(). Prototype was for msm_iommu_pagetable_free_pt() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:37 +0000 (10:46 -0800)]
drm/msm: msm_gpu.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_gpu.h:119 Incorrect use of kernel-doc
format: * devfreq: devfreq instance
Warning: drivers/gpu/drm/msm/msm_gpu.h:125 Incorrect use of kernel-doc
format: * idle_freq:
Warning: drivers/gpu/drm/msm/msm_gpu.h:136 Incorrect use of kernel-doc
format: * boost_constraint:
Warning: drivers/gpu/drm/msm/msm_gpu.h:144 Incorrect use of kernel-doc
format: * busy_cycles: Last busy counter value, for calculating elapsed
busy
Warning: drivers/gpu/drm/msm/msm_gpu.h:156 Incorrect use of kernel-doc
format: * idle_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:163 Incorrect use of kernel-doc
format: * boost_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'lock' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'governor' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'we are
continuing to sample busyness and * adjust frequency while the GPU is
idle' not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'busy_cycles'
not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'suspended' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:472 No description found for
return value of 'msm_context_is_vmbind'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'ref' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'elapsed_ns' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:492 expecting prototype for
msm_context_is_vm_bind(). Prototype was for msm_context_is_vmbind()
instead
Warning: drivers/gpu/drm/msm/msm_gpu.h:523 No description found for
return value of 'msm_gpu_convert_priority'
Warning: drivers/gpu/drm/msm/msm_gpu.h:583 expecting prototype for
struct msm_gpu_submitqueues. Prototype was for struct msm_gpu_submitqueue
instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:35 +0000 (10:46 -0800)]
drm/msm: msm_fence.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_fence.h:27 Incorrect use of kernel-doc
format: * last_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:36 Incorrect use of kernel-doc
format: * completed_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:44 Incorrect use of kernel-doc
format: * fenceptr:
Warning: drivers/gpu/drm/msm/msm_fence.h:65 Incorrect use of kernel-doc
format: * next_deadline_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'dev' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'name' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'context' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'index' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fence' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'there is no
remaining pending work */ uint32_t last_fence' not described in
'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'updated from the CPU after interrupt * from GPU */ uint32_t completed_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fenceptr' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'spinlock' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'next_deadline'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member
'next_deadline_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_timer'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_work'
not described in 'msm_fence_context'
Randy Dunlap [Fri, 19 Dec 2025 18:46:34 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_wb.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:24 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:57 struct member
'setup_roi' not described in 'dpu_hw_wb_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:75 struct member
'caps' not described in 'dpu_hw_wb'
Randy Dunlap [Fri, 19 Dec 2025 18:46:33 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_vbif.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:19 Incorrect use of
kernel-doc format: * set_limit_conf - set transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:29 Incorrect use of
kernel-doc format: * get_limit_conf - get transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:39 Incorrect use of
kernel-doc format: * set_halt_ctrl - set halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:48 Incorrect use of
kernel-doc format: * get_halt_ctrl - get halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:57 Incorrect use of
kernel-doc format: * set_qos_remap - set QoS priority remap
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:67 Incorrect use of
kernel-doc format: * set_mem_type - set memory type
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:76 Incorrect use of
kernel-doc format: * clear_errors - clear any vbif errors
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:88 Incorrect use of
kernel-doc format: * set_write_gather_en - set write_gather enable
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'limit' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_qos_remap' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_mem_type' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
's' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_write_gather_en' not described in 'dpu_hw_vbif_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:32 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_top.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:93 Incorrect use of
kernel-doc format: * setup_traffic_shaper() : Setup traffic shaper control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:101 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - set clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:111 Incorrect use of
kernel-doc format: * get_danger_status - get danger status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:119 Incorrect use of
kernel-doc format: * setup_vsync_source - setup vsync source
configuration details
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:127 Incorrect use of
kernel-doc format: * get_safe_status - get safe status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:135 Incorrect use of
kernel-doc format: * dp_phy_intf_sel - configure intf to phy mapping
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:142 Incorrect use of
kernel-doc format: * intf_audio_select - select the external interface
for audio
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_danger_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_vsync_source' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_safe_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'dp_phy_intf_sel' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'intf_audio_select' not described in 'dpu_hw_mdp_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:31 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_sspp.h: fix all kernel-doc warnings
Modify non-kernel-doc comments to begin with "/*" instead of "/**".
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:17 missing initial
short description on line: * Flags
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:19 expecting
prototype for Flags(). Prototype was for DPU_SSPP_FLIP_LR() instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:26 This comment
starts with '/**', but isn't a kernel-doc comment.
* Component indices
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:47 cannot understand
function prototype: 'enum dpu_sspp_multirect_index'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:152 struct member
'dst_rect' not described in 'dpu_sw_pipe_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_index' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_mode' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:183 Incorrect use of
kernel-doc format: * setup_format - setup pixel format cropping
rectangle, flip
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:192 Incorrect use of
kernel-doc format: * setup_rects - setup pipe ROI rectangles
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:200 Incorrect use of
kernel-doc format: * setup_pe - setup pipe pixel extension
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:208 Incorrect use of
kernel-doc format: * setup_sourceaddress - setup pipe source addresses
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:216 Incorrect use of
kernel-doc format: * setup_csc - setup color space coversion
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:223 Incorrect use of
kernel-doc format: * setup_solidfill - enable/disable colorfill
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:231 Incorrect use of
kernel-doc format: * setup_multirect - setup multirect configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:238 Incorrect use of
kernel-doc format: * setup_sharpening - setup sharpening
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:247 Incorrect use of
kernel-doc format: * setup_qos_lut - setup QoS LUTs
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:255 Incorrect use of
kernel-doc format: * setup_qos_ctrl - setup QoS control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:263 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - setup clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:271 Incorrect use of
kernel-doc format: * setup_histogram - setup histograms
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:279 Incorrect use of
kernel-doc format: * setup_scaler - setup scaler
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:288 Incorrect use of
kernel-doc format: * setup_cdp - setup client driven prefetch
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_format' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_rects' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_pe' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sourceaddress' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_csc' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_solidfill' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_multirect' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sharpening' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_lut' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_histogram' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_scaler' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_cdp' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:320 struct member
'mdss_ver' not described in 'dpu_hw_sspp'
Randy Dunlap [Fri, 19 Dec 2025 18:46:30 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_pingpong.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:36 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:46 Incorrect use
of kernel-doc format: * enables vysnc generation and sets up init value of
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:53 Incorrect use
of kernel-doc format: * disables tear check block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:58 Incorrect use
of kernel-doc format: * read, modify, write to either set or clear
listening to external TE
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:65 Incorrect use
of kernel-doc format: * Obtain current vertical line counter
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:70 Incorrect use
of kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:75 Incorrect use
of kernel-doc format: * Setup dither matix for pingpong block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:80 Incorrect use
of kernel-doc format: * Enable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:85 Incorrect use
of kernel-doc format: * Disable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:90 Incorrect use
of kernel-doc format: * Setup DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'connect_external_te' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_autorefresh' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'enable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'setup_dsc' not described in 'dpu_hw_pingpong_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:28 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_lm.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:27 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:52 Incorrect use of
kernel-doc format: * Clear layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:59 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:69 Incorrect use of
kernel-doc format: * setup_border_color : enable/disable border color
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:76 Incorrect use of
kernel-doc format: * setup_misr: Enable/disable MISR
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:81 Incorrect use of
kernel-doc format: * collect_misr: Read MISR signature
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_mixer_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blend_config' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_alpha_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'clear_all_blendstages' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blendstage' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_border_color' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_misr' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'collect_misr' not described in 'dpu_hw_lm_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:27 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_intf.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:76 duplicate section
name 'Return'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:112 Incorrect use of
kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_timing_gen' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_prg_fetch' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'enable_timing' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_status' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_line_count' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'disable_autorefresh' not described in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_vsync_info'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'setup_autorefresh'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_autorefresh'
description in 'dpu_hw_intf_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:26 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_dspp.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:33 expecting prototype
for struct dpu_hw_pcc. Prototype was for struct dpu_hw_pcc_cfg instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:42 Incorrect use of
kernel-doc format: * setup_pcc - setup dspp pcc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:48 struct member
'setup_pcc' not described in 'dpu_hw_dspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:76 expecting prototype
for dpu_hw_dspp(). Prototype was for to_dpu_hw_dspp() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:25 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_dsc.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:23 Incorrect use of
kernel-doc format: * dsc_disable - disable dsc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:29 Incorrect use of
kernel-doc format: * dsc_config - configures dsc encoder
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:41 Incorrect use of
kernel-doc format: * dsc_config_thresh - programs panel thresholds
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_disable' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config_thresh' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_bind_pingpong_blk' not described in 'dpu_hw_dsc_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:24 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_cwb.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cwb.h:30 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cwb.h:61 expecting prototype
for dpu_hw_cwb(). Prototype was for to_dpu_hw_cwb() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:23 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_ctl.h: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:18 cannot understand
function prototype: 'enum dpu_ctl_mode_sel'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:58 struct member 'wb'
not described in 'dpu_hw_intf_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:66 Incorrect use of
kernel-doc format: * kickoff hw operation for Sw controlled interfaces
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:73 Incorrect use of
kernel-doc format: * check if the ctl is started
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:80 Incorrect use of
kernel-doc format: * kickoff prepare is in progress hw operation for sw
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:88 Incorrect use of
kernel-doc format: * Clear the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:96 Incorrect use of
kernel-doc format: * Query the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:103 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:112 Incorrect use of
kernel-doc format: * OR in the given flushbits to the
cached pending_(wb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:121 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cwb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:130 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(intf_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:139 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(periph_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:148 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(merge_3d_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:157 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:166 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:175 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:185 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(dsc_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:194 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cdm_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:202 Incorrect use of
kernel-doc format: * Write the value of the pending_flush_mask to hardware
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:208 Incorrect use of
kernel-doc format: * Read the value of the flush register
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:215 Incorrect use of
kernel-doc format: * Setup ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:223 Incorrect use of
kernel-doc format: * reset ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:244 Incorrect use of
kernel-doc format: * Set all blend stages to disabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:250 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:262 Incorrect use of
kernel-doc format: * Set active pipes attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:270 Incorrect use of
kernel-doc format: * Set active layer mixers attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_start' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'is_started' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_pending' not described in 'dpu_hw_ctl_ops'
[many here]
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_periph_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_merge_3d_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_dspp_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:327 expecting
prototype for dpu_hw_ctl(). Prototype was for to_dpu_hw_ctl() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:22 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_cdm.h: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:91 Incorrect use of
kernel-doc format: * Enable the CDM module
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:97 Incorrect use of
kernel-doc format: * Enable/disable the connection with pingpong
Randy Dunlap [Fri, 19 Dec 2025 18:46:21 +0000 (10:46 -0800)]
drm/msm/dp: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/dp/dp_debug.h:31 expecting prototype for
msm_dp_debug_get(). Prototype was for msm_dp_debug_init() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_drm.c:24 function parameter
'connector' not described in 'msm_dp_bridge_detect'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:90 expecting prototype for
mdss_dp_test_bit_depth_to_bpp(). Prototype was for
msm_dp_link_bit_depth_to_bpp() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'aux' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'dev' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:70 function parameter
'bw_code' not described in 'is_link_rate_valid'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:84 expecting prototype for
msm_dp_link_is_lane_count_valid(). Prototype was for
is_lane_count_valid() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:20 +0000 (10:46 -0800)]
drm/msm/disp: mdp_format: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:27 This comment starts
with '/**', but isn't a kernel-doc comment.
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_a' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_b_cb' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_g_y' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_r_cr' not described in 'msm_format'
Anna Maniscalco [Mon, 1 Dec 2025 18:14:36 +0000 (19:14 +0100)]
drm/msm: Fix a7xx per pipe register programming
GEN7_GRAS_NC_MODE_CNTL was only programmed for BR and not for BV pipe
but it needs to be programmed for both.
Program both pipes in hw_init and introducea separate reglist for it in
order to add this register to the dynamic reglist which supports
restoring registers per pipe.
Fixes: 91389b4e3263 ("drm/msm/a6xx: Add a pwrup_list field to a6xx_info") Cc: stable@vger.kernel.org Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/691553/
Message-ID: <20251201-gras_nc_mode_fix-v3-1-92a8a10d91d0@gmail.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Alok Tiwari [Thu, 13 Nov 2025 08:28:31 +0000 (00:28 -0800)]
drm/msm/a6xx: move preempt_prepare_postamble after error check
Move the call to preempt_prepare_postamble() after verifying that
preempt_postamble_ptr is valid. If preempt_postamble_ptr is NULL,
dereferencing it in preempt_prepare_postamble() would lead to a crash.
This change avoids calling the preparation function when the
postamble allocation has failed, preventing potential NULL pointer
dereference and ensuring proper error handling.
Fixes: 50117cad0c50 ("drm/msm/a6xx: Use posamble to reset counters on preemption") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Patchwork: https://patchwork.freedesktop.org/patch/687659/
Message-ID: <20251113082839.3821867-1-alok.a.tiwari@oracle.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Neil Armstrong [Mon, 17 Nov 2025 14:51:35 +0000 (15:51 +0100)]
drm/msm: adreno: fix deferencing ifpc_reglist when not declared
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Fixes: a6a0157cc68e ("drm/msm/a6xx: Enable IFPC on Adreno X1-85") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688944/
Message-ID: <20251117-topic-sm8x50-fix-a6xx-non-ifpc-v1-1-e4473cbf5903@linaro.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
projects / thirdparty / kernel / linux.git / log
