ACPI: Documentation: driver-api: Disapprove of using ACPI drivers
Sadly, there is quite a bit of technical debt related to the
kernel's ACPI support subsystem and one of the most significant
pieces of it is the existence and use of ACPI drivers represented
by struct acpi_driver objects.
Those drivers are bound directly to struct acpi_device objects, also
referred to as "ACPI device nodes", representing device objects in the
ACPI namespace defined as:
A hierarchical tree structure in OS-controlled memory that contains
named objects. These objects may be data objects, control method
objects, bus/device package objects, and so on.
according to the ACPI specification [1].
The above definition implies, although rather indirectly, that the
objects in question don't really represent hardware. They are just
"device package objects" containing some information on the devices
present in the given platform that is known to the platform firmware.
Although the platform firmware can be the only source of information on
some devices, the information provided by it alone may be insufficient
for device enumeration in general. If that is the case, binding a
driver directly to a given ACPI device node clearly doesn't make sense.
If the device in question is enumerated through a hardware interface, it
will be represented by a device object matching that interface, like
a struct pci_dev, and the ACPI device node corresponding to it will be
treated as its "ACPI companions" whose role is to amend the "native"
enumeratiom mechanism.
For the sake of consistency and confusion avoidance, it is better to
treat ACPI device nodes in general as ACPI companions of other device
objects representing hardware. In some cases though it appeared easier
to take a shortcut and use an ACPI driver binding directly to an ACPI
device node. Moreover, there were corner cases in which that was the
only choice, but they all have been addressed now.
In all cases in which an ACPI driver might be used, the ACPI device
node it might bind to is an ACPI companion of another device object
representing a piece of hardware. It is thus better to use a driver
binding to the latter than to use an ACPI driver and leave the other
device object alone, not just because doing so is more consistent and
less confusing, but also because using ACPI drivers may lead to
potential functional deficiencies, like possible ordering issues
related to power management.
Unfortunately, there are quite a few ACPI drivers in use and, as a rule,
they bind to ACPI device nodes that are ACPI companions of platform
devices, so in fact they play the role of platform drivers although in
a kind of convoluted way. An effort has been under way to replace them
with platform drivers, which is relatively straightforward in the vast
majority of cases, but it has not been pursued very aggressively so far,
mostly due to the existence of the corner cases mentioned above.
However, since those corner cases are gone now, it makes sense to spend
more time on driver conversions with the ultimate goal to get rid of
struct acpi_driver and the related code from the kernel.
To that end, add a document explaining why using ACPI drivers is not
a good idea, so it need not be explained from scratch on every attempt
to convert an ACPI driver to a platform one.
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI video driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Adjust acpi_video_bus_notify() to cast its "data" argument to a struct
acpi_video_bus pointer instead of a struct acpi_device one, which allows
the use of acpi_driver_data() to be limited and will facilitate
subsequent changes.
ACPI: scan: Register platform devices for backlight device objects
ACPI device objects associated with backlight interfaces are special
because they are ACPI companions of PCI devices (GPUs), but the
interfaces exposed by them resemble platform device one.
Currently, the ACPI video driver binds to them with the help of a
special "synthetic" device ID regardless of the pairing with the PCI
devices, but since it is generally better to use platform drivers for
handling such interfaces, the plan is to convert that drviver into a
platform one.
However, for this purpose, platform devices corresponding to the
ACPI backlight device objects need to be registered, so update
acpi_bus_attach() to apply the default ACPI enumeration to them
and modify acpi_create_platform_device() to avoid bailing out early
if a "physical" device is already attached to a backlight ACPI device
object.
In addition, update acpi_companion_match() to return a valid struct
acpi_device pointer if the ACPI companion of the given device is a
backlight ACPI device object, which will facilitate driver matching
for platform devices corresponding to those objects.
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI smart battery subsystem (SBS)
driver to a platform one.
After this conversion, acpi_smbus_hc_probe() does not need to populate the
driver_data pointer of the SMBUS HC platform device's ACPI companion any
more, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
ACPI: SMBUS HC: Convert the driver to a platform one
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI SMBUS HC driver to a platform one.
After this conversion, acpi_ec_probe() does not need to populate the
driver_data pointer of the EC platform device's ACPI companion any
more, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI embedded controller (EC) driver
to a platform one.
After this conversion, acpi_bus_register_early_device() does not need
to attempt to bind an ACPI driver to the struct acpi_device created by
it, so update it accordingly.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
To facilitate converting the ACPI EC driver into a platform one,
modify acpi_bus_register_early_device(), used by acpi_ec_ecdt_start()
for creating a struct acpi_device to represent the "early" EC based
on the ECDT ACPI table, to carry out the default ACPI enumeration for
the given device which will cause a platform device to be registered
for it.
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI hardware error device (HED) driver
to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
ACPI: thermal: Rework system suspend and resume handling
In the process of handling system resume, acpi_thermal_resume() attempts
to power up active cooling devices to guarantee that they will be
operational when the ACPI thermal check queued by it runs. However,
the only kind of cooling devices that can be bound to ACPI thermal zones
is fans and they are already powered up by the ACPI fan driver resume,
which additionally takes "ACPI 4" fans that don't need to be powered
up into account.
For this reason, remove the part of acpi_thermal_resume() related to
fans and in order to ensure that it will run after powering up all fans,
rename it to acpi_thermal_complete() and point the .complete() driver
callback to it. Analogously, rename acpi_thermal_suspend() to
acpi_thermal_prepare() and point the .prepare() driver callback to it.
ACPI: thermal: Convert the driver to a platform one
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI thermal zone driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Adjust acpi_thermal_notify() to cast its "data" argument to a struct
acpi_thermal pointer istead of a struct acpi_device one, which allows
the use of acpi_driver_data() to be limited and will facilitate
subsequent changes.
ACPI: scan: Register platform devices for thermal zones
Currently, platform devices are not registered for ACPI thermal zones
because they are not represented as device objects in the ACPI namespace.
Instead, they are represented as thermal zone objects, so in particular
the platform_id flag is not set for them during enumeration because it
is only set for objects of type ACPI_BUS_TYPE_DEVICE, but otherwise they
are handled similarly at the ACPI core level.
To facilitate converting the ACPI thermal zone driver into a platform
one, modify acpi_set_pnp_ids() to set the platform_id flag for thermal
zones in analogy with device objects to cause platform devices to be
registered for them.
ACPI: scan: Do not mark button ACPI devices as wakeup-capable
It is generally questionable to mark struct acpi_device "devices" as
wakeup-capable because they represent firmware entities that by
themselves have no wakeup capabilities.
It was done for struct acpi_device "devices" corresponding to buttons
because the ACPI button driver was binding to them directly, but now
that corresponding platform devices are created for the buttons and
they are marked as wakeup-capable by the ACPI button driver, there is
no reason to continue doing it.
ACPI: scan: Do not bind ACPI drivers to fixed event buttons
Both ACPI button drivers have been converted to platform ones, so there
is no reason to attempt to bind an ACPI driver to a struct acpi_device
representing a fixed event device button.
ACPI: tiny-power-button: Convert the driver to a platform one
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI tiny-power-button driver to a
platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
ACPI: button: Convert the driver to a platform one
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI button driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Adjust the event notification routines in the ACPI button driver to
take a struct acpi_button pointer as an argument istead of a struct
acpi_device one where applicable, which allows the use of
acpi_driver_data() to be limited and will facilitate subsequent
changes.
ACPI: scan: Reduce code duplication related to fixed event devices
Move duplicate fixed event device registration code
from acpi_bus_scan_fixed() into a new function called
acpi_bus_add_fixed_device_object() and make acpi_bus_scan_fixed()
invoke that function as needed.
ACPI: scan: Register platform devices for fixed event buttons
On platforms using ACPI, power and sleep buttons may be so called "fixed
event devices" in which case they are hooked up directly to the Fixed
Events register in the platform via dedicated lines and there are no
corresponding device objects in the ACPI namespace. Nevertheless, in
Linux they get corresponding struct acpi_device objects with special
device IDs, either LNXPWRBN or LNXSLPBN, which are then used for driver
binding in a ususal way.
However, the function creating those struct acpi_device objects for
"fixed event device" buttons, acpi_bus_scan_fixed(), does not register
platform devices for them, unlike the generic code handling device
enumeration based on the ACPI namespace. Consequently, if an ACPI power
or sleep button is represented by a device object in the ACPI namespace,
it will get a corresponding platform device, but if it is a "fixed event
device", it will not get one, which is inconsistent and prevents the
ACPI power button driver from being converted into a platform driver.
For the sake of consistency and to allow the ACPI power button driver to
become a platform one going forward, modify acpi_bus_scan_fixed() to
register platform devices for "fixed event device" buttons and update
ACPI platform device registration code to work with non-device ACPI
object types, so it can handle the buttons in question.
ACPI: NFIT: core: Convert the driver to a platform one
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI NFIT core driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
This change was mostly developed by Michal Wilczynski [1].
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
There is a long-standing problem with ACPI device enumeration that
if the given device has a compatible ID which is one of the generic
system resource device IDs (PNP0C01 and PNP0C02), it will be claimed
by the PNP scan handler and it will not be represented as a platform
device, so it cannot be handled by a platform driver.
Drivers have been working around this issue by "manually" creating
platform devices that they can bind to (see the Intel HID driver for
one example) or adding their device IDs to acpi_nonpnp_device_ids[].
None of the above is particularly clean though and the only reason why
the PNP0C01 and PNP0C02 device IDs are present in acpi_pnp_device_ids[]
is to allow the legacy PNP system driver to bind to those devices and
reserve their resources so they are not used going forward.
Obviously, to address this problem PNP0C01 and PNP0C02 need to be
dropped from acpi_pnp_device_ids[], but doing so without making any
other changes would be problematic because the ACPI core would then
create platform devices for the generic system resource device objects
and that would not work on all systems for two reasons. First, the
PNP system driver explicitly avoids reserving I/O resources below the
"standard PC hardware" boundary, 0x100, to avoid conflicts in that range
(one possible case when this may happen is when the CMOS RTC driver is
involved), but the platform device creation code does not do that.
Second, there may be resource conflicts between the "system" devices and
the other devices in the system, possibly including conflicts with PCI
BARs. Registering the PNP system driver via fs_initcall() helps to
manage those conflicts, even though it does not make them go away.
Resource conflicts during the registration of "motherboard resources"
that occur after PCI has claimed BARs are harmless as a rule and do
not need to be addressed in any specific way.
To overcome the issues mentioned above, use the observation that it
is not actually necessary to create any device objects in addition
to struct acpi_device ones in order to reserve the "system" device
resources because that can be done directly in the ACPI device
enumeration code.
Namely, modify acpi_default_enumeration() to add the given ACPI device
object to a special "system devices" list if its _HID is either PNP0C01
or PNP0C02 without creating a platform device for it. Next, add a new
special acpi_scan_claim_resources() function that will be run via
fs_initcall() and will walk that list and reserve resources for each
device in it along the lines of what the PNP system driver does.
Having made the above changes, drop PNP0C01 and PNP0C02 from
acpi_pnp_device_ids[] which will allow platform devices to be created
for ACPI device objects whose _CID lists contain PNP0C01 or PNP0C02,
but the _HID is not in acpi_pnp_device_ids[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Drop a leftover comment and add a new one elsewhere ] Link: https://patch.msgid.link/9550709.CDJkKcVGEf@rafael.j.wysocki Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Linus Torvalds [Fri, 12 Dec 2025 17:44:03 +0000 (05:44 +1200)]
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
Linus Torvalds [Fri, 12 Dec 2025 10:04:18 +0000 (22:04 +1200)]
Merge tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
Linus Torvalds [Fri, 12 Dec 2025 10:01:32 +0000 (22:01 +1200)]
Merge tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
Linus Torvalds [Fri, 12 Dec 2025 09:59:19 +0000 (21:59 +1200)]
Merge tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
Linus Torvalds [Fri, 12 Dec 2025 09:52:42 +0000 (21:52 +1200)]
Merge tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
Brendan Jackman [Sun, 7 Dec 2025 03:53:18 +0000 (03:53 +0000)]
bug: Hush suggest-attribute=format for __warn_printf()
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Heiko Carstens [Mon, 8 Dec 2025 20:06:58 +0000 (21:06 +0100)]
bug: Let report_bug_entry() provide the correct bugaddr
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Evan Li [Fri, 12 Dec 2025 08:49:43 +0000 (16:49 +0800)]
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") Reported-by: kitta <kitta@linux.alibaba.com> Co-developed-by: kitta <kitta@linux.alibaba.com> Signed-off-by: Evan Li <evan.li@linux.alibaba.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Linus Torvalds [Thu, 11 Dec 2025 03:13:29 +0000 (12:13 +0900)]
Merge tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Linus Torvalds [Thu, 11 Dec 2025 00:57:08 +0000 (09:57 +0900)]
Merge tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for SPI that came in during the merge window,
nothing too exciting here"
* tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: Fix an error handling path in mchp_corespi_probe()
spi: cadence-qspi: Fix runtime PM imbalance in probe
Linus Torvalds [Thu, 11 Dec 2025 00:54:59 +0000 (09:54 +0900)]
Merge tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
Arnd Bergmann [Thu, 4 Dec 2025 10:01:58 +0000 (11:01 +0100)]
mm: memfd_luo: add CONFIG_SHMEM dependency
The new memfd code fails to link without SHMEM:
aarch64-linux-ld: mm/memfd_luo.o: in function `memfd_luo_retrieve_folios':
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0xdc): undefined reference to `shmem_add_to_page_cache'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x11c): undefined reference to `shmem_inode_acct_blocks'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x134): undefined reference to `shmem_recalc_inode'
Add a Kconfig dependency to disallow that configuration.
Arnd Bergmann [Thu, 4 Dec 2025 10:28:59 +0000 (11:28 +0100)]
mm: shmem: avoid build warning for CONFIG_SHMEM=n
The newly added 'flags' variable is unused and causes a warning if
CONFIG_SHMEM is disabled, since the shmem_acct_size() macro it is passed
into does nothing:
mm/shmem.c: In function '__shmem_file_setup':
mm/shmem.c:5816:23: error: unused variable 'flags' [-Werror=unused-variable]
5816 | unsigned long flags = (vm_flags & VM_NORESERVE) ? SHMEM_F_NORESERVE : 0;
| ^~~~~
Replace the two macros with equivalent inline functions to get the
argument checking.
Link: https://lkml.kernel.org/r/20251204102905.1048000-1-arnd@kernel.org Fixes: 6ff1610ced56 ("mm: shmem: use SHMEM_F_* flags instead of VM_* flags") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Christian Brauner <brauner@kernel.org> Cc: guoweikang <guoweikang.kernel@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: invalidate inode if i_mode is zero after block read
A panic occurs in ocfs2_unlink due to WARN_ON(inode->i_nlink == 0) when
handling a corrupted inode with i_mode=0 and i_nlink=0 in memory.
This "zombie" inode is created because ocfs2_read_locked_inode proceeds
even after ocfs2_validate_inode_block successfully validates a block that
structurally looks okay (passes checksum, signature etc.) but contains
semantically invalid data (specifically i_mode=0). The current validation
function doesn't check for i_mode being zero.
This results in an in-memory inode with i_mode=0 being added to the VFS
cache, which later triggers the panic during unlink.
Prevent this by adding an explicit check for (i_mode == 0, i_nlink == 0,
non-orphan) within ocfs2_validate_inode_block. If the check is true,
return -EFSCORRUPTED to signal corruption. This causes the caller
(ocfs2_read_locked_inode) to invoke make_bad_inode(), correctly preventing
the zombie inode from entering the cache.
Link: https://lkml.kernel.org/r/20251202224507.53452-2-eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reported-by: syzbot+55c40ae8a0e5f3659f2b@syzkaller.appspotmail.com Fixes: https://syzkaller.appspot.com/bug?extid=55c40ae8a0e5f3659f2b Link: https://lore.kernel.org/all/20251022222752.46758-2-eraykrdg1@gmail.com/T/ Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warning:
fs/ocfs2/xattr.c:52:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER struct ocfs2_extent_rec er; onto the FAM
struct ocfs2_xattr_value_root::xr_list.l_recs[], while keeping the FAM and
the start of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's intentionally
placed inmediately after the related structure --no blank line in between.
Link: https://lkml.kernel.org/r/aRKm_7aN7Smc3J5L@kspp Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
Now that the centralized `ocfs2_emergency_state()` helper is available,
refactor remaining filesystem-wide checks for `ocfs2_is_soft_readonly` and
`ocfs2_is_hard_readonly` to use this new function.
To ensure strict consistency with the previous behavior and guarantee no
functional changes, the call sites continue to explicitly return -EROFS
when the emergency state is detected. This standardizes the check logic
while preserving the existing error handling flow.
Link: https://lkml.kernel.org/r/3421641b54ad6b6e4ffca052351b518eacc1bd08.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: add ocfs2_emergency_state helper and apply to setattr
Patch series "ocfs2: Refactor read-only checks to use
ocfs2_emergency_state", v4.
Following the fix for the `make_bad_inode` validation failure (syzbot ID: b93b65ee321c97861072), this separate series introduces a new helper
function, `ocfs2_emergency_state()`, to improve and centralize read-only
and error state checking.
This is modeled after the `ext4_emergency_state()` pattern, providing a
single, unified location for checking all filesystem-level emergency
conditions. This makes the code cleaner and ensures that any future
checks (e.g., for fatal error states) can be added in one place.
This series is structured as follows:
1. The first patch introduces the `ocfs2_emergency_state()` helper
(currently checking for -EROFS) and applies it to `ocfs2_setattr`
to provide a "fail-fast" mechanism, as suggested by Albin
Babu Varghese.
2. The second patch completes the refactoring by converting all
remaining read-only checks throughout OCFS2 to use this new helper.
This patch (of 2):
To centralize error checking, follow the pattern of other filesystems like
ext4 (which uses `ext4_emergency_state()`), and prepare for future
enhancements, this patch introduces a new helper function:
`ocfs2_emergency_state()`.
The purpose of this helper is to provide a single, unified location for
checking all filesystem-level emergency conditions. In this initial
implementation, the function only checks for the existing hard and soft
read-only modes, returning -EROFS if either is set.
This provides a foundation where future checks (e.g., for fatal error
states returning -EIO, or shutdown states) can be easily added in one
place.
This patch also adds this new check to the beginning of `ocfs2_setattr()`.
This ensures that operations like `ftruncate` (which triggered the
original BUG) fail-fast with -EROFS when the filesystem is already in a
read-only state.
Link: https://lkml.kernel.org/r/cover.1764728893.git.eraykrdg1@gmail.com Link: https://lkml.kernel.org/r/e9e975bcaaff8dbc155b70fbc1b2798a2e36e96f.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Suggested-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: David Hunter <david.hunter.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ally Heev [Wed, 3 Dec 2025 15:28:49 +0000 (20:58 +0530)]
checkpatch: add uninitialized pointer with __free attribute check
Uinitialized pointers with __free attribute can cause undefined behavior
as the memory randomly assigned to the pointer is freed automatically when
the pointer goes out of scope. add check in checkpatch to detect such
issues.
syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the
`cl_next_free_rec` field of the allocation chain list (next free slot in
the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)
condition in ocfs2_find_victim_chain() and panicking the kernel.
To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),
just before calling ocfs2_find_victim_chain(), the code block in it being
executed when either of the following conditions is true:
1. `cl_next_free_rec` is equal to 0, indicating that there are no free
chains in the allocation chain list
2. `cl_next_free_rec` is greater than `cl_count` (the total number of
chains in the allocation chain list)
Either of them being true is indicative of the fact that there are no
chains left for usage.
This is addressed using ocfs2_error(), which prints
the error log for debugging purposes, rather than panicking the kernel.
Link: https://lkml.kernel.org/r/20251201130711.143900-1-activprithvi@gmail.com Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com> Reported-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=96d38c6e1655c1420a72 Tested-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pasha Tatashin [Sun, 30 Nov 2025 01:09:19 +0000 (20:09 -0500)]
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
The kernel test robot reported a Smatch warning:
kernel/liveupdate/luo_core.c:402 luo_ioctl() warn: unsigned 'nr' is
never less than zero.
This occurs because 'nr' is unsigned and LIVEUPDATE_CMD_BASE is currently
defined as 0, making the check (nr < LIVEUPDATE_CMD_BASE) always false.
Remove the explicit lower bound check. The logic remains correct because
'nr' is unsigned; if nr is less than LIVEUPDATE_CMD_BASE, the expression
(nr - LIVEUPDATE_CMD_BASE) will wrap around to a large positive value.
This will inevitably be larger than ARRAY_SIZE(luo_ioctl_ops) and be
caught by the upper bound check.
Link: https://lkml.kernel.org/r/20251130010919.1488230-1-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511280300.6pvBmXUS-lkp@intel.com/ Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Matlack <dmatlack@google.com> Cc: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
Add comprehensive validation of inline xattr metadata in
ocfs2_xattr_ibody_list() to prevent out-of-bounds access and
use-after-free bugs when processing corrupted inline xattrs.
The patch adds two critical validations:
1. Validates i_xattr_inline_size before use:
- Ensures it does not exceed block size
- Ensures it is at least large enough for xattr header
- Prevents pointer arithmetic with corrupted size values that could
point outside the inode block
2. Validates xattr entry count (xh_count):
- Calculates maximum entries that can fit in the inline space
- Rejects counts that exceed this limit
- Prevents out-of-bounds array access in subsequent code
Without these checks, a corrupted filesystem with invalid inline xattr
metadata can cause the code to access memory beyond the allocated space.
For example:
- A corrupted i_xattr_inline_size of 0 would cause header pointer
calculation to point past the end of the block
- A corrupted xh_count of 22 with inline_size of 256 would cause
array access 7 entries beyond the 15 that actually fit (the syzbot
reproducer used xh_count of 20041), leading to use-after-free when
accessing freed memory pages
The validation uses the correct inline_size (from di->i_xattr_inline_size)
rather than block size, ensuring accurate bounds checking for inline
xattrs specifically.
Thorsten Blum [Wed, 26 Nov 2025 11:44:15 +0000 (12:44 +0100)]
ocfs2: replace deprecated strcpy with strscpy
strcpy() has been deprecated [1] because it performs no bounds checking on
the destination buffer, which can lead to buffer overflows. Replace it
with the safer strscpy(). No functional changes.
ocfs2: check tl_used after reading it from trancate log inode
The fuzz image has a truncate log inode whose tl_used is bigger than
tl_count so it triggers the BUG in ocfs2_truncate_log_needs_flush() [1].
As what the check in ocfs2_truncate_log_needs_flush() does, just do same
check into ocfs2_get_truncate_log_info() when truncate log inode is
reading in so we can bail out earlier.
Link: https://lkml.kernel.org/r/tencent_B24B1C1BE225DCBA44BB6933AB9E1B1B0708@qq.com Reported-by: syzbot+f82afc4d4e74d0ef7a89@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f82afc4d4e74d0ef7a89 Tested-by: syzbot+f82afc4d4e74d0ef7a89@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Fri, 28 Nov 2025 07:17:07 +0000 (10:17 +0300)]
liveupdate: luo_file: don't use invalid list iterator
If we exit a list_for_each_entry() without hitting a break then the list
iterator points to an offset from the list_head. It's a non-NULL but
invalid pointer and dereferencing it isn't allowed.
Introduce a new "found" variable to test instead.
Link: https://lkml.kernel.org/r/aSlMc4SS09Re4_xn@stanley.mountain Fixes: 3ee1d673194e ("liveupdate: luo_file: implement file systems callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202511280420.y9O4fyhX-lkp@intel.com/ Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Wed, 10 Dec 2025 23:54:08 +0000 (08:54 +0900)]
Merge tag 'slab-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for performance regression in tests that perform
kmem_cache_destroy() a lot, due to unnecessarily wide scope of
kvfree_rcu_barrier() (Harry Yoo)
* tag 'slab-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction
Linus Torvalds [Wed, 10 Dec 2025 23:19:46 +0000 (08:19 +0900)]
Merge tag 's390-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Use the MSI parent domain API instead of the legacy API for setup and
teardown of PCI MSI IRQs
- Select POSIX_CPU_TIMERS_TASK_WORK now that VIRT_XFER_TO_GUEST_WORK
has been implemented for s390
- Fix a KVM bug which can lead to guest memory corruption
- Fix KASAN shadow memory mapping for hotplugged memory
- Minor bug fixes and improvements
* tag 's390-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bug: Add missing alignment
s390/bug: Add missing CONFIG_BUG ifdef again
KVM: s390: Fix gmap_helper_zap_one_page() again
s390/pci: Migrate s390 IRQ logic to IRQ domain API
genirq: Change hwirq parameter to irq_hw_number_t
s390: Select POSIX_CPU_TIMERS_TASK_WORK
s390: Unmap early KASAN shadow on memory offlining
s390/vmem: Support 2G page splitting for KASAN shadow freeing
s390/boot: Use entire page for PTEs
s390/vmur: Use scnprintf() instead of sprintf()
Linus Torvalds [Wed, 10 Dec 2025 23:14:23 +0000 (08:14 +0900)]
Merge tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- last minute fix for missing parenthesis in recently merged code (Hans
de Goede)
- removal of excessive, non-fatal warnings (Dave Kleikamp)
* tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Fix DMA_BIT_MASK() macro being broken
dma/pool: eliminate alloc_pages warning in atomic_pool_expand
Unbinding amdgpu has no problems, but binding it again leads to an
error of sysfs file already existing. This is because it wasn't
actually cleaned up on unbind. Add the missing cleanup step.
Fixes: 547aad32edac ("drm/amdgpu: add VCN4 ip block support") Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d717e62e9b6ccff0e3cec78a58dfbd00858448b3) Cc: stable@vger.kernel.org
Linus Torvalds [Wed, 10 Dec 2025 23:01:52 +0000 (08:01 +0900)]
Merge tag 'alpha-for-v6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"Two small uapi fixes. One patch hardcodes TC* ioctl values that
previously depended on the deprecated termio struct, avoiding build
issues with newer glibc versions. The other patch switches uapi
headers to use the compiler-defined __ASSEMBLER__ macro for better
consistency between kernel and userspace.
- don't reference obsolete termio struct for TC* constants
- Replace __ASSEMBLY__ with __ASSEMBLER__ in the alpha headers"
* tag 'alpha-for-v6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: don't reference obsolete termio struct for TC* constants
alpha: Replace __ASSEMBLY__ with __ASSEMBLER__ in the alpha headers
Keith Busch [Wed, 10 Dec 2025 10:43:46 +0000 (02:43 -0800)]
blk-mq-dma: always initialize dma state
Ensure the dma state is initialized when we're not using the contiguous
iova, otherwise the caller may be using a stale state from a previous
request that could use the coalesed iova allocation.
Fixes: 2f6b2565d43cdb5 ("block: accumulate memory segment gaps per bio") Reported-by: Sebastian Ott <sebott@redhat.com> Tested-by: Sebastian Ott <sebott@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Li Chen [Fri, 5 Dec 2025 05:46:20 +0000 (05:46 +0000)]
dm pcache: fix segment info indexing
Segment info indexing also used sizeof(struct) instead of the
4K metadata stride, so info_index could point between slots and
subsequent writes would advance incorrectly. Derive info_index
from the pointer returned by the segment meta search using
PCACHE_SEG_INFO_SIZE and advance to the next slot for future
updates.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Zheng Gu <cengku@gmail.com> Cc: stable@vger.kernel.org # 6.18
Li Chen [Fri, 5 Dec 2025 05:46:19 +0000 (05:46 +0000)]
dm pcache: fix cache info indexing
The on-media cache_info index used sizeof(struct) instead of the
4K metadata stride, so gc_percent updates from dmsetup message
were written between slots and lost after reboot. Use
PCACHE_CACHE_INFO_SIZE in get_cache_info_addr() and align
info_index with the slot returned by pcache_meta_find_latest().
Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Zheng Gu <cengku@gmail.com> Cc: stable@vger.kernel.org # 6.18
Dongsheng Yang [Fri, 5 Dec 2025 05:46:18 +0000 (05:46 +0000)]
dm-pcache: advance slot index before writing slot
In dm-pcache, in order to ensure crash-consistency, a dual-copy scheme
is used to alternately update metadata, and there is a slot index that
records the current slot. However, in the write path the current
implementation writes directly to the current slot indexed by slot
index, and then advances the slot — which ends up overwriting the
existing slot, violating the crash-consistency guarantee.
This patch fixes that behavior, preventing metadata from being
overwritten incorrectly.
In addition, this patch add a missing pmem_wmb() after memcpy_flushcache().
Haotian Zhang [Mon, 1 Dec 2025 07:41:03 +0000 (15:41 +0800)]
dm log-writes: Add missing set_freezable() for freezable kthread
The log_writes_kthread() calls try_to_freeze() but lacks set_freezable(),
rendering the freeze attempt ineffective since kernel threads are
non-freezable by default. This prevents proper thread suspension during
system suspend/hibernate.
Add set_freezable() to explicitly mark the thread as freezable.
Alexey Simakov [Tue, 2 Dec 2025 17:18:38 +0000 (20:18 +0300)]
dm-raid: fix possible NULL dereference with undefined raid type
rs->raid_type is assigned from get_raid_type_by_ll(), which may return
NULL. This NULL value could be dereferenced later in the condition
'if (!(rs_is_raid10(rs) && rt_is_raid0(rs->raid_type)))'.
Add a fail-fast check to return early with an error if raid_type is NULL,
similar to other uses of this function.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 33e53f06850f ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping") Signed-off-by: Alexey Simakov <bigalex934@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
projects / thirdparty / kernel / linux.git / log
