This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this.
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume.
CHARGE_CONTROL_LIMIT is a wrong property to report charge current limit,
because `CHARGE_*` attributes represents capacity, not current. The
correct attribute to report and set charge current limit is
CONSTANT_CHARGE_CURRENT.
Rename CHARGE_CONTROL_LIMIT to CONSTANT_CHARGE_CURRENT.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 91428ca9320e ("parisc: Check region is readable by user in raw_copy_from_user()") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
openat2 had a bug: if we pass RESOLVE_NO_XDEV, then openat2
doesn't traverse through automounts, but may still trigger them.
(See the link for full bug report with reproducer.)
In of_unittest_pci_node_verify(), when the add parameter is false,
device_find_any_child() obtains a reference to a child device. This
function implicitly calls get_device() to increment the device's
reference count before returning the pointer. However, the caller
fails to properly release this reference by calling put_device(),
leading to a device reference count leak. Add put_device() in the else
branch immediately after child_dev is no longer needed.
As the comment of device_find_any_child states: "NOTE: you will need
to drop the reference with put_device() after use".
Found by code review.
Cc: stable@vger.kernel.org Fixes: 26409dd04589 ("of: unittest: Add pci_dt_testdrv pci driver") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loop_change_fd() and loop_configure() call loop_check_backing_file()
to validate the new backing file. If validation fails, the reference
acquired by fget() was not dropped, leaking a file reference.
Fix this by calling fput(file) before returning the error.
Cc: stable@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> CC: Yang Erkun <yangerkun@huawei.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai1@huaweicloud.com> Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter") Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference taken when looking up the genpool platform
device in of_gen_pool_get() before returning the pool.
Note that holding a reference to a device does typically not prevent its
devres managed resources from being released so there is no point in
keeping the reference.
Link: https://lkml.kernel.org/r/20250924080207.18006-1-johan@kernel.org Fixes: 9375db07adea ("genalloc: add devres support, allow to find a managed pool by device") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
[For the Fixes commit I used the commit that introduced the memcmp().
It predates the introduction of crypto_memneq(), but it was still a bug
at the time even though a helper function didn't exist yet.]
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()
path is very broken.
sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct
itself. If tsk != current and tsk is not a leader, this process can exit/exec
and task_lock(tsk->group_leader) may use the already freed task_struct.
Another problem is that sys_prlimit64() can race with mt-exec which changes
->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)
->group_leader may change between task_lock() and task_unlock().
Change sys_prlimit64() to take tasklist_lock when necessary. This is not
nice, but I don't see a better fix for -stable.
Link: https://lkml.kernel.org/r/20250915120917.GA27702@redhat.com Fixes: 18c91bb2d872 ("prlimit: do not grab the tasklist_lock") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The specification, Section 7.10, "Software Steps to Drain Page Requests &
Responses," requires software to submit an Invalidation Wait Descriptor
(inv_wait_dsc) with the Page-request Drain (PD=1) flag set, along with
the Invalidation Wait Completion Status Write flag (SW=1). It then waits
for the Invalidation Wait Descriptor's completion.
However, the PD field in the Invalidation Wait Descriptor is optional, as
stated in Section 6.5.2.9, "Invalidation Wait Descriptor":
"Page-request Drain (PD): Remapping hardware implementations reporting
Page-request draining as not supported (PDS = 0 in ECAP_REG) treat this
field as reserved."
This implies that if the IOMMU doesn't support the PDS capability, software
can't drain page requests and group responses as expected.
Do not enable PCI/PRI if the IOMMU doesn't support PDS.
Remove unnecessary calls to pm_runtime_disable(), pm_runtime_set_active(),
and pm_runtime_enable() from the resume path. These operations are not
required here and can interfere with proper pm_runtime state handling,
especially when resuming from a pm_runtime suspended state.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250901-icm42pmreg-v3-2-ef1336246960@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BootLoaders (Grub, LILO, etc) may pass an identifier such as "BOOT_IMAGE=
/boot/vmlinuz-x.y.z" to kernel parameters. But these identifiers are not
recognized by the kernel itself so will be passed to userspace. However
user space init program also don't recognize it.
KEXEC/KDUMP (kexec-tools) may also pass an identifier such as "kexec" on
some architectures.
We cannot change BootLoader's behavior, because this behavior exists for
many years, and there are already user space programs search BOOT_IMAGE=
in /proc/cmdline to obtain the kernel image locations:
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/util.go
(search getBootOptions)
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/main.go
(search getKernelReleaseWithBootOption) So the the best way is handle
(ignore) it by the kernel itself, which can avoid such boot warnings (if
we use something like init=/bin/bash, bootloader identifier can even cause
a crash):
Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-6.x root=/dev/sda3 ro console=tty
Unknown kernel command line parameters "BOOT_IMAGE=(hd0,1)/vmlinuz-6.x", will be passed to user space.
To convert level-triggered alarms into edge-triggered IIO events, alarms
are masked when they are triggered. To ensure we catch subsequent
alarms, we then periodically poll to see if the alarm is still active.
If it isn't, we unmask it. Active but masked alarms are stored in
current_masked_alarm.
If an active alarm is disabled, it will remain set in
current_masked_alarm until ams_unmask_worker clears it. If the alarm is
re-enabled before ams_unmask_worker runs, then it will never be cleared
from current_masked_alarm. This will prevent the alarm event from being
pushed even if the alarm is still active.
Fix this by recalculating current_masked_alarm immediately when enabling
or disabling alarms.
AMS_ALARM_THR_DIRECT_MASK should be bit 0, not bit 1. This would cause
hysteresis to be enabled with a lower threshold of -28C. The temperature
alarm would never deassert even if the temperature dropped below the
upper threshold.
The ADF4350/1 features a programmable dual-modulus prescaler of 4/5 or 8/9.
When set to 4/5, the maximum RF frequency allowed is 3 GHz.
Therefore, when operating the ADF4351 above 3 GHz, this must be set to 8/9.
In this context not the RF output frequency is meant
- it's the VCO frequency.
Therefore move the prescaler selection after we derived the VCO frequency
from the desired RF output frequency.
This BUG may have caused PLL lock instabilities when operating the VCO at
the very high range close to 4.4 GHz.
Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250829-adf4350-fix-v2-1-0bf543ba797d@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 'ret' variable in ad5421_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5421_write_unlocked().
Fixes: 5691b23489db ("staging:iio:dac: Add AD5421 driver") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://patch.msgid.link/20250901135726.17601-3-rongqianfeng@vivo.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 'ret' variable in ad5360_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5360_write_unlocked().
Fixes: a3e2940c24d3 ("staging:iio:dac: Add AD5360 driver") Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Link: https://patch.msgid.link/20250901135726.17601-2-rongqianfeng@vivo.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two problems with the chip configuration in this driver:
- First, is that writing 12 bytes (ARRAY_SIZE(regs)) would anyhow
lead to a config overflow due to HW auto increment implementation
in the chip.
- Second, the i2c_smbus_write_block_data write ends up in writing
unexpected value to the channel_dis register, this is because
the smbus size that is 0x03 in this case gets written to the
register. The PAC1931/2/3/4 data sheet does not really specify
that block write is indeed supported.
This problem is probably not visible on PAC1934 version where all
channels are used as the chip is properly configured by luck,
but in our case whenusing PAC1931 this leads to nonfunctional device.
Fixes: 0fb528c8255b (iio: adc: adding support for PAC193x) Suggested-by: Rene Straub <mailto:rene.straub@belden.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com> Reviewed-by: Marius Cristea <marius.cristea@microchip.com> Link: https://patch.msgid.link/20250811130904.2481790-1-aleksandar.gerasimovski@belden.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I observed a hang when running generic/323 against a fuseblk server.
This test opens a file, initiates a lot of AIO writes to that file
descriptor, and closes the file descriptor before the writes complete.
Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for
responses from the fuseblk server:
The fuseblk server is fuse2fs so there's nothing all that exciting in
the server itself. So why is the fuse server calling fuse_file_put?
The commit message for the fstest sheds some light on that:
"By closing the file descriptor before calling io_destroy, you pretty
much guarantee that the last put on the ioctx will be done in interrupt
context (during I/O completion).
Aha. AIO fgets a new struct file from the fd when it queues the ioctx.
The completion of the FUSE_WRITE command from userspace causes the fuse
server to call the AIO completion function. The completion puts the
struct file, queuing a delayed fput to the fuse server task. When the
fuse server task returns to userspace, it has to run the delayed fput,
which in the case of a fuseblk server, it does synchronously.
Sending the FUSE_RELEASE command sychronously from fuse server threads
is a bad idea because a client program can initiate enough simultaneous
AIOs such that all the fuse server threads end up in delayed_fput, and
now there aren't any threads left to handle the queued fuse commands.
Fix this by only using asynchronous fputs when closing files, and leave
a comment explaining why.
Cc: stable@vger.kernel.org # v2.6.38 Fixes: 5a18ec176c934c ("fuse: fix hang of single threaded fuseblk filesystem") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a kernel panic due to WARN_ONCE when panic_on_warn is set.
This issue occurs when writeback is triggered due to sync call for an
opened file(ie, writeback reason is WB_REASON_SYNC). When f2fs balance
is needed at sync path, flush for quota_release_work is triggered.
By default quota_release_work is queued to "events_unbound" queue which
does not have WQ_MEM_RECLAIM flag. During f2fs balance "writeback"
workqueue tries to flush quota_release_work causing kernel panic due to
MEM_RECLAIM flag mismatch errors.
This patch creates dedicated workqueue with WQ_MEM_RECLAIM flag
for work quota_release_work.
Fixes: ac6f420291b3 ("quota: flush quota_release_work upon quota writeback") CC: stable@vger.kernel.org Signed-off-by: Shashank A P <shashank.ap@samsung.com> Link: https://patch.msgid.link/20250901092905.2115-1-shashank.ap@samsung.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org Fixes: 93604a5ade3a ("fbdev: Handle video= parameter in video/cmdline.c") Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
Fix this problem by replacing rwlock with spinlock.
This reduces the event bandwidth, as the producers now have to contend with
each other for the spinlock. According to the benchmark from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c:
On 12 x86 CPUs:
Before After Diff
threads events/ms events/ms
8 7162 4956 -31%
16 8733 5383 -38%
32 7968 5572 -30%
64 10652 5739 -46%
128 11236 5931 -47%
On 4 riscv CPUs:
Before After Diff
threads events/ms events/ms
8 2958 2833 -4%
16 3323 3097 -7%
32 3451 3240 -6%
64 3554 3178 -11%
128 3601 3235 -10%
Although the numbers look bad, it should be noted that this benchmark
creates multiple threads who do nothing except constantly generating new
epoll events, thus contention on the spinlock is high. For real workload,
the event rate is likely much lower, and the performance drop is not as
bad.
Using another benchmark (perf bench epoll wait) where spinlock contention
is lower, improvement is even observed on x86:
On 12 x86 CPUs:
Before: Averaged 110279 operations/sec (+- 1.09%), total secs = 8
After: Averaged 114577 operations/sec (+- 2.25%), total secs = 8
On 4 riscv CPUs:
Before: Averaged 175767 operations/sec (+- 0.62%), total secs = 8
After: Averaged 167396 operations/sec (+- 0.23%), total secs = 8
In conclusion, no one is likely to be upset over this change. After all,
spinlock was used originally for years, and the commit which converted to
rwlock didn't mention a real workload, just that the benchmark numbers are
nice.
This patch is not exactly the revert of commit a218cc491420 ("epoll: use
rwlock in order to reduce ep_poll_callback() contention"), because git
revert conflicts in some places which are not obvious on the resolution.
This patch is intended to be backported, therefore go with the obvious
approach:
- Replace rwlock_t with spinlock_t one to one
- Delete list_add_tail_lockless() and chain_epi_lockless(). These were
introduced to allow producers to concurrently add items to the list.
But now that spinlock no longer allows producers to touch the event
list concurrently, these two functions are not necessary anymore.
Fixes: a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") Signed-off-by: Nam Cao <namcao@linutronix.de> Link: https://lore.kernel.org/ec92458ea357ec503c737ead0f10b2c6e4c37d47.1752581388.git.namcao@linutronix.de Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Cc: stable@vger.kernel.org Reported-by: Frederic Weisbecker <frederic@kernel.org> Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1] Reported-by: Valentin Schneider <vschneid@redhat.com> Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote.csb/ [2] Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems like everywhere in this file, when the request is not
bidirectionala, req->src is mapped with DMA_TO_DEVICE and req->dst is
mapped with DMA_FROM_DEVICE.
Fixes: 62f58b1637b7 ("crypto: aspeed - add HACE crypto driver") Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later.
With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.
As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).
For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:
if (clone_flags & CLONE_CLEAR_SIGHAND)
in function copy_sighand within fork.c will always fail given:
unsigned long /* == uint32_t */ clone_flags
#define CLONE_CLEAR_SIGHAND 0x100000000ULL
This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.
Fixes: b612e5df4587 ("clone3: add CLONE_CLEAR_SIGHAND") Cc: stable@vger.kernel.org # linux-5.5+ Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com> Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
The mhi_ep_read_channel function incorrectly assumes the End of Transfer
(EOT) bit is present for each packet in a chained transactions, causing
it to advance mhi_chan->rd_offset beyond wr_offset during host-to-device
transfers when EOT has not yet arrived. This leads to access of unmapped
host memory, causing IOMMU faults and processing of stale TREs.
Modify the loop condition to ensure mhi_queue is not empty, allowing the
function to process only valid TREs up to the current write pointer to
prevent premature reads and ensure safe traversal of chained TREs.
Due to this change, buf_left needs to be removed from the while loop
condition to avoid exiting prematurely before reading the ring completely,
and also remove write_offset since it will always be zero because the new
cache buffer is allocated every time.
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba84 ("NFS support for btrfs - v3") CC: stable@vger.kernel.org # 3.0+ Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this is hidden behind perfmon_capable() since this is
technically an info leak, given that this is a system wide metric.
However the granularity reported here is always PAGE_SIZE aligned, which
matches what the core kernel is already willing to expose to userspace
if querying how many free RAM pages there are on the system, and that
doesn't need any special privileges. In addition other drm drivers seem
happy to expose this.
The motivation here if with oneAPI where they want to use the system
wide 'used' reporting here, so not the per-client fdinfo stats. This has
also come up with some perf overlay applications wanting this
information.
Fixes: 1105ac15d2a1 ("drm/xe/uapi: restrict system wide accounting") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Joshua Santosh <joshua.santosh.ranjan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250919122052.420979-2-matthew.auld@intel.com
(cherry picked from commit 4d0b035fd6dae8ee48e9c928b10f14877e595356) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Fixes: 9ce523cc3bf2 ("drm/nouveau: separate buffer object backing memory from nvkm structures") Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver") Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org Fixes: 5f7762042f8a ("drm/panthor: Restrict high priorities on group_create") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When cdev_device_add() failed, calling put_device() to explicitly
release dev->lirc_dev. Otherwise, it could cause the fault of the
reference count.
Found by code review.
Cc: stable@vger.kernel.org Fixes: a6ddd4fecbb0 ("media: lirc: remove last remnants of lirc kapi") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't use OF ports and remote-endpoints to connect the CSI2RX bridge
and this device in the device tree, thus it is wrong to use
v4l2_create_fwnode_links_to_pad() to create the media graph link between
the two.
It works out on accident, as neither the source nor the sink implement
the .get_fwnode_pad() callback, and the framework helper falls back on
using the first source and sink pads to create the link between them.
Instead, manually create the media link from the first source pad of the
bridge to the first sink pad of the J721E CSI2RX.
Fixes: b4a3d877dc92 ("media: ti: Add CSI2RX support for J721E") Cc: stable@vger.kernel.org Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68) Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vivid driver supports the <Vendor Command With ID> message,
but if the Vendor ID of the received message didn't match the Vendor ID
of the CEC Adapter, then it ignores it (good) and returns 0 (bad).
It should return -ENOMSG to indicate that other followers should be
asked to handle it. Return code 0 means that the driver handled it,
which is wrong in this case.
As a result, userspace followers never get the chance to process such a
message.
Refactor the code a bit to have the function return -ENOMSG at the end,
drop the default case, and ensure that the message handlers return 0.
That way 0 is only returned if the message is actually handled in the
vivid_received() function.
When starting venus with the "no_tz" code path, IRIS2 needs the same
boot/reset sequence as IRIS2_1. This is because most of the registers were
moved to the "wrapper_tz_base", which is already defined for both IRIS2 and
IRIS2_1 inside core.c. Add IRIS2 to the checks inside firmware.c as well to
make sure that it uses the correct reset sequence.
Both IRIS2 and IRIS2_1 are HFI v6 variants, so the correct sequence was
used before commit c38610f8981e ("media: venus: firmware: Sanitize
per-VPU-version").
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0bb8 ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA map functions can fail and should be tested for errors.
If the mapping fails, free blanking_ptr and set it to 0. As 0 is a
valid DMA address, use blanking_ptr to test if the DMA address
is set.
Fixes: 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always
require an enabled link") expanded the meaning of the MUST_CONNECT flag
to require an enabled link in all cases. To do so, the link exploration
code was expanded to cover unconnected pads, in order to reject those
that have the MUST_CONNECT flag set. The implementation was however
incorrect, ignoring unconnected pads instead of ignoring connected pads.
Fix it.
Reported-by: Martin Kepplinger-Novaković <martink@posteo.de> Closes: https://lore.kernel.org/linux-media/20250205172957.182362-1-martink@posteo.de Reported-by: Maud Spierings <maudspierings@gocontroll.com> Closes: https://lore.kernel.org/linux-media/20250818-imx8_isi-v1-1-e9cfe994c435@gocontroll.com Fixes: b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always require an enabled link") Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Maud Spierings <maudspierings@gocontroll.com> Tested-by: Martin Kepplinger-Novaković <martink@posteo.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change "ret" from unsigned int to int type in mt9v111_calc_frame_rate()
to store negative error codes or zero returned by __mt9v111_hw_reset()
and other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Fixes: aab7ed1c3927 ("media: i2c: Add driver for Aptina MT9V111") Cc: stable@vger.kernel.org Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete the external-module style Makefile commands. They are not needed
for in-tree modules.
This is the only Makefile in the kernel tree (aside from tools/ and
samples/) that uses this Makefile style.
The same files are built with or without this patch.
Fixes: 056f2821b631 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver") Cc: stable@vger.kernel.org # 5.5 Cc: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in.
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d2412 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a5d ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
rc is overwritten by the evtchn_status hypercall in each iteration, so
the return value will be whatever the last iteration is. This could
incorrectly return success even if the event channel was not found.
Change to an explicit -ENOENT for an un-found virq and return 0 on a
successful match.
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy") Cc: stable@kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michael Riesch <michael.riesch@collabora.com> Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CMN S3's DTM offset is different between r0px and r1p0, and it
turns out this was not a error in the earlier documentation, but
does actually exist in the design. Lovely.
Cc: stable@vger.kernel.org Fixes: 0dc2f4963f7e ("perf/arm-cmn: Support CMN S3") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].
"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples
The state of the EMU[1:0] terminals are latched during reset to determine
ICEPick boot mode. For normal device operation, these terminals must be
pulled up to a valid high logic level ( > VIH min) before ICEPick samples
the state of these terminals, which occurs
[five CLK_M_OSC clock cycles - 10 ns] after the falling edge of WARMRSTn.
Many applications may not require the secondary GPIO function of the
EMU[1:0] terminals. In this case, they would only be connected to pull-up
resistors, which ensures they are always high when ICEPick samples.
However, some applications may need to use these terminals as GPIO where
they could be driven low before reset is asserted. This usage of the
EMU[1:0] terminals may require special attention to ensure the terminals
are allowed to return to a valid high-logic level before ICEPick samples
the state of these terminals.
When any device reset is asserted, the pin mux mode of EMU[1:0] terminals
configured to operate as GPIO (mode 7) will change back to EMU input
(mode 0) on the falling edge of WARMRSTn. This only provides a short period
of time for the terminals to return high if driven low before reset is
asserted...
If the EMU[1:0] terminals are configured to operate as GPIO, the product
should be designed such these terminals can be pulled to a valid high-logic
level within 190 ns after the falling edge of WARMRSTn."
We've noticed this problem with custom am335x hardware in combination with
recently implemented cold reset method
(commit 6521f6a195c70 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")).
It looks like the problem can affect other HW, for instance AM335x
Chiliboard, because the latter has LEDs on GPIO3_7/GPIO3_8 as well.
One option would be to check if the pins are in GPIO mode and either switch
to output active high, or switch to input and poll until the external
pull-ups have brought the pins to the desired high state. But fighting
with GPIO driver for these pins is probably not the most straight forward
approch in a reboot handler.
Fortunately we can easily control pinmuxing here and rely on the external
pull-ups. TI recommends 4k7 external pull up resistors [2] and even with
quite conservative estimation for pin capacity (1 uF should never happen)
the required delay shall not exceed 5ms.
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1bf8 ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page") Cc: <stable@vger.kernel.org> Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
pm8010 is a camera specific PMIC, and may not be present on some
devices. These may instead use a dedicated vreg for this purpose (Dell
XPS 9345, Dell Inspiron..) or use USB webcam instead of a MIPI one
alltogether (Lenovo Thinbook 16, Lenovo Yoga..).
Disable pm8010 by default, let platforms that actually have one onboard
enable it instead.
Cc: stable@vger.kernel.org Fixes: 2559e61e7ef4 ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs") Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Link: https://lore.kernel.org/r/20250701183625.1968246-2-alex.vinarskis@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
In the ACPI debugger interface, the helper functions for read and write
operations use "int" as the length parameter data type. When a large
"size_t count" is passed from the file operations, this cast to "int"
results in truncation and a negative value due to signed integer
representation.
Logically, this negative number propagates to the min() calculation,
where it is selected over the positive buffer space value, leading to
unexpected behavior. Subsequently, when this negative value is used in
copy_to_user() or copy_from_user(), it is interpreted as a large positive
value due to the unsigned nature of the size parameter in these functions,
causing the copy operations to attempt handling sizes far beyond the
intended buffer limits.
Address the issue by:
- Changing the length parameters in acpi_aml_read_user() and
acpi_aml_write_user() from "int" to "size_t", aligning with the
expected unsigned size semantics.
- Updating return types and local variables in acpi_aml_read() and
acpi_aml_write() to "ssize_t" for consistency with kernel file
operation conventions.
- Using "size_t" for the "n" variable to ensure calculations remain
unsigned.
- Using min_t() for circ_count_to_end() and circ_space_to_end() to
ensure type-safe comparisons and prevent integer overflow.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com
[ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 3230b2b3c1ab ("ACPI: TAD: Add low-level support for real time capability") Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://patch.msgid.link/2881298.hMirdbgypa@daniel-desktop3 Cc: 5.2+ <stable@vger.kernel.org> # 5.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACPI handle passed to acpi_extract_properties() as the first
argument represents the ACPI namespace scope in which to look for
objects returning buffers associated with buffer properties.
For _DSD objects located immediately under ACPI devices, this handle is
the same as the handle of the device object holding the _DSD, but for
data-only subnodes it is not so.
First of all, data-only subnodes are represented by objects that
cannot hold other objects in their scopes (like control methods).
Therefore a data-only subnode handle cannot be used for completing
relative pathname segments, so the current code in
in acpi_nondev_subnode_extract() passing a data-only subnode handle
to acpi_extract_properties() is invalid.
Moreover, a data-only subnode of device A may be represented by an
object located in the scope of device B (which kind of makes sense,
for instance, if A is a B's child). In that case, the scope in
question would be the one of device B. In other words, the scope
mentioned above is the same as the scope used for subnode object
lookup in acpi_nondev_subnode_extract().
Accordingly, rearrange that function to use the same scope for the
extraction of properties and subnode object lookup.
Fixes: 103e10c69c61 ("ACPI: property: Add support for parsing buffer property UUID") Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building s390 defconfig with binutils older than 2.32, there are
several warnings during the final linking stage:
s390-linux-ld: .tmp_vmlinux1: warning: allocated section `.got.plt' not in segment
s390-linux-ld: .tmp_vmlinux2: warning: allocated section `.got.plt' not in segment
s390-linux-ld: vmlinux.unstripped: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: vmlinux: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: st7afZyb: warning: allocated section `.got.plt' not in segment
binutils commit afca762f598 ("S/390: Improve partial relro support for
64 bit") [1] in 2.32 changed where .got.plt is emitted, avoiding the
warning.
The :NONE in the .vmlinux.info output section description changes the
segment for subsequent allocated sections. Move .vmlinux.info right
above the discards section to place all other sections in the previously
defined segment, .data.
In the upcoming changes, the ELF_DETAILS macro will be extended with
the ".modinfo" section, which will cause an error:
>> s390x-linux-ld: .tmp_vmlinux1: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: .tmp_vmlinux2: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: vmlinux.unstripped: warning: allocated section `.modinfo' not in segment
This happens because the .vmlinux.info use :NONE to override the default
segment and tell the linker to not put the section in any segment at all.
To avoid this, we need to change the sections order that will be placed
in the default segment.
Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: linux-s390@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506062053.zbkFBEnJ-lkp@intel.com/ Signed-off-by: Alexey Gladkov <legion@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://patch.msgid.link/20d40a7a3a053ba06a54155e777dcde7fdada1db.1758182101.git.legion@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Stable-dep-of: 9338d660b79a ("s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections") Signed-off-by: Sasha Levin <sashal@kernel.org>
When unpinning a BPF hash table (htab or htab_lru) that contains internal
structures (timer, workqueue, or task_work) in its values, a BUG warning
is triggered:
BUG: sleeping function called from invalid context at kernel/bpf/hashtab.c:244
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
...
The issue arises from the interaction between BPF object unpinning and
RCU callback mechanisms:
1. BPF object unpinning uses ->free_inode() which schedules cleanup via
call_rcu(), deferring the actual freeing to an RCU callback that
executes within the RCU_SOFTIRQ context.
2. During cleanup of hash tables containing internal structures,
htab_map_free_internal_structs() is invoked, which includes
cond_resched() or cond_resched_rcu() calls to yield the CPU during
potentially long operations.
However, cond_resched() or cond_resched_rcu() cannot be safely called from
atomic RCU softirq context, leading to the BUG warning when attempting
to reschedule.
Fix this by changing from ->free_inode() to ->destroy_inode() and rename
bpf_free_inode() to bpf_destroy_inode() for BPF objects (prog, map, link).
This allows direct inode freeing without RCU callback scheduling,
avoiding the invalid context warning.
Reported-by: Le Chen <tom2cat@sjtu.edu.cn> Closes: https://lore.kernel.org/all/1444123482.1827743.1750996347470.JavaMail.zimbra@sjtu.edu.cn/ Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20251008102628.808045-2-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com> Reviewed-by: Justinien Bouron <jbouron@amazon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
new : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 17:03:34 2025 Fri Oct 3 17:03:34 2025
new : Fri Oct 3 17:03:36 2025 Fri Oct 3 17:03:36 2025
Fixes: b6f2a0f89d7e ("cifs: for compound requests, use open handle if possible") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: Frank Sorenson <sorenson@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The return value of copy_to_iter() function will never be negative,
it is the number of bytes copied, or zero if nothing was copied.
Update the check to treat 0 as an error, and return -1 in that case.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list") Acked-by: Tom Talpey <tom@talpey.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/ Fixes: 117e149e26d1 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_runtime_get_sync() and pm_runtime_put_autosuspend() were previously
called in cmdq_mbox_send_data(), which is under a spinlock in msg_submit()
(mailbox.c). This caused lockdep warnings such as "sleeping function
called from invalid context" when running with lockdebug enabled.
The BUG report:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1164
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3616, name: kworker/u17:3
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
CPU: 1 PID: 3616 Comm: kworker/u17:3 Not tainted 6.1.87-lockdep-14133-g26e933aca785 #1
Hardware name: Google Ciri sku0/unprovisioned board (DT)
Workqueue: imgsys_runner imgsys_runner_func
Call trace:
dump_backtrace+0x100/0x120
show_stack+0x20/0x2c
dump_stack_lvl+0x84/0xb4
dump_stack+0x18/0x48
__might_resched+0x354/0x4c0
__might_sleep+0x98/0xe4
__pm_runtime_resume+0x70/0x124
cmdq_mbox_send_data+0xe4/0xb1c
msg_submit+0x194/0x2dc
mbox_send_message+0x190/0x330
imgsys_cmdq_sendtask+0x1618/0x2224
imgsys_runner_func+0xac/0x11c
process_one_work+0x638/0xf84
worker_thread+0x808/0xcd0
kthread+0x24c/0x324
ret_from_fork+0x10/0x20
Additionally, pm_runtime_put_autosuspend() should be invoked from the
GCE IRQ handler to ensure the hardware has actually completed its work.
To resolve these issues, remove the pm_runtime calls from
cmdq_mbox_send_data() and delegate power management responsibilities
to the client driver.
__pm_runtime_put_autosuspend() was meant to be used by callers that needed
to put the Runtime PM usage_count without marking the device's last busy
timestamp. It was however seen that the Runtime PM autosuspend related
functions should include that call. Thus switch the driver to
use pm_runtime_put_autosuspend().
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first.
Fixes: b4ab31414970 ("bpf: Add redirect_neigh helper as redirect drop-in") Reported-by: Yusuke Suzuki <yusuke.suzuki@isovalent.com> Reported-by: Julian Wiedmann <jwi@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jordan Rife <jrife@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jordan Rife <jrife@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20251003073418.291171-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate.
Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI") Signed-off-by: Harini T <harini.t@amd.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cleanup loop was starting at the wrong array index, causing
out-of-bounds access.
Start the loop at the correct index for zero-indexed arrays to prevent
accessing memory beyond the allocated array bounds.
The ipi_mbox->dev.parent check is unreliable proxy for registration
status as it fails to protect against probe failures that occur after
the parent is assigned but before device_register() completes.
device_is_registered() is the canonical and robust method to verify the
registration status.
Remove ipi_mbox->dev.parent check in zynqmp_ipi_free_mboxes().
The controller is registered using the device-managed function
'devm_mbox_controller_register()'. As documented in mailbox.c, this
ensures the devres framework automatically calls
mbox_controller_unregister() when device_unregister() is invoked, making
the explicit call unnecessary.
Remove redundant mbox_controller_unregister() call as
device_unregister() handles controller cleanup.
projects / thirdparty / kernel / stable.git / log
