In the CPU removal path the ->offline() callback provided by the
driver is always invoked before ->exit(), but in the cpufreq_online()
error path it is not, so ->exit() is expected to somehow know the
context in which it has been called and act accordingly.
That is less than straightforward, so make cpufreq_online() invoke
the driver's ->offline() callback, if present, on errors before
->exit() too.
This only potentially affects intel_pstate.
Fixes: 91a12e91dc39 ("cpufreq: Allow light-weight tear down and bring up of CPUs") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang's Control Flow Integrity requires that every indirect call has a
valid target, which is based on the type of the function pointer. The
*_show() functions in this file are written as if they will be called
from dev_attr_show(); however, they will be called from
sysfs_kf_seq_show() because the files were created by
sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops
because of kobject_add_and_create(). Because the *_show() functions do
not match the type of the show() member in struct kobj_attribute, there
is a CFI violation.
Convert these functions to the type of the show() member in struct
kobj_attribute so that there is no more CFI violation. Because these
functions are all so similar, combine them into a macro.
Fixes: d1ff4b1cdbab ("ACPI: Add support for exposing BGRT data") Link: https://github.com/ClangBuiltLinux/linux/issues/1406 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit a79050434b45 ("blk-rq-qos: refactor out common elements of
blk-wbt"), if throttle was disabled by wbt_disable_default(), we could
not enable again, fix this by set enable_state back to
WBT_STATE_ON_DEFAULT.
Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that we disable wbt by simply zero out rwb->wb_normal in
wbt_disable_default() when switch elevator to bfq, but it's not safe
because it will become false positive if we change queue depth. If it
become false positive between wbt_wait() and wbt_track() when submit
write request, it will lead to drop rqw->inflight to -1 in wbt_done(),
which will end up trigger IO hung. Fix this issue by introduce a new
state which mean the wbt was disabled.
Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
igen6_edac needs mce_register()/unregister() functions,
so it should depend on X86_MCE (or X86_MCE_INTEL).
That change prevents these build errors:
ld: drivers/edac/igen6_edac.o: in function `igen6_remove':
igen6_edac.c:(.text+0x494): undefined reference to `mce_unregister_decode_chain'
ld: drivers/edac/igen6_edac.o: in function `igen6_probe':
igen6_edac.c:(.text+0xf5b): undefined reference to `mce_register_decode_chain'
Fixes: 10590a9d4f23e ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210619160203.2026-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Before commit 8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.
This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.
Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.
Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.
Fixes: 8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work") Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Reviewed-by: James Morse <james.morse@arm.com>
[ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.
Fixes: b34677b0999a ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 41d2d848e5c0 ("md: improve io stats accounting") could cause
double fault problem per the report [1], and also it is not correct to
change ->bi_end_io if md don't own it, so let's revert it.
And io stats accounting will be replemented in later commits.
pstore-blk just pokes directly into the pagecache for the block
device without going through the file operations for that by faking
up it's own file operations that do not match the block device ones.
As this breaks the control of the block layer of it's page cache,
and even now just works by accident only the best thing is to just
disable this driver.
Currently, a device description can be obtained using ACPI, if the _STR
method exists for a particular device, and then exposed to the userspace
via a sysfs object as a string value.
If the _STR method is available for a given device then the data
(usually a Unicode string) is read and stored in a buffer (of the
ACPI_TYPE_BUFFER type) with a pointer to said buffer cached in the
struct acpi_device_pnp for later access.
The description_show() function is responsible for exposing the device
description to the userspace via a corresponding sysfs object and
internally calls the utf16s_to_utf8s() function with a pointer to the
buffer that contains the Unicode string so that it can be converted from
UTF16 encoding to UTF8 and thus allowing for the value to be safely
stored and later displayed.
When invoking the utf16s_to_utf8s() function, the description_show()
function also sets a limit of the data that can be saved into a provided
buffer as a result of the character conversion to be a total of
PAGE_SIZE, and upon completion, the utf16s_to_utf8s() function returns
an integer value denoting the number of bytes that have been written
into the provided buffer.
Following the execution of the utf16s_to_utf8s() a newline character
will be added at the end of the resulting buffer so that when the value
is read in the userspace through the sysfs object then it would include
newline making it more accessible when working with the sysfs file
system in the shell, etc. Normally, this wouldn't be a problem, but if
the function utf16s_to_utf8s() happens to return the number of bytes
written to be precisely PAGE_SIZE, then we would overrun the buffer and
write the newline character outside the allotted space which can have
undefined consequences or result in a failure.
To fix this buffer overrun, ensure that there always is enough space
left for the newline character to be safely appended.
Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description") Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The documentation around the StorageD3Enable property hints that it
should be made on the PCI device. This is where newer AMD systems set
the property and it's required for S0i3 support.
So rather than look for nodes of the root port only present on Intel
systems, switch to the companion ACPI device for all systems.
David Box from Intel indicated this should work on Intel as well.
Microsoft Hypervisor expects the logical processor index to be the same
as CPU's index during logical processor creation. Using cpu_physical_id
confuses hypervisor's scheduler. That causes the root partition not boot
when core scheduler is used.
This patch removes the call to cpu_physical_id and uses the CPU index
directly for bringing up logical processor. This scheme works for both
classic scheduler and core scheduler.
For flush request, rq->end_io() may be called two times, one is from
timeout handling(blk_mq_check_expired()), another is from normal
completion(__blk_mq_end_request()).
Move blk_account_io_flush() after flush_rq->ref drops to zero, so
io accounting can be done just once for flush request.
Fixes: b68663186577 ("block: add iostat counters for flush requests") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210511152236.763464-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ACPI fan device IDs are shared between the fan driver and the
device power management code. The former is modular, so it needs
to include the table of device IDs for module autoloading and the
latter needs that list to avoid attaching the generic ACPI PM domain
to fan devices (which doesn't make sense) possibly before the fan
driver module is loaded.
Unfortunately, that requires the list of fan device IDs to be
updated in two places which is prone to mistakes, so put it into
a symbol definition in a separate header file so there is only one
copy of it in case it needs to be updated again in the future.
Fixes: b9ea0bae260f ("ACPI: PM: Avoid attaching ACPI PM domain to certain devices") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On ARMv7, resource_size_t can be 64-bit, which breaks printing
it as %x:
drivers/edac/aspeed_edac.c: In function 'init_csrows':
drivers/edac/aspeed_edac.c:257:28: error: format '%x' expects argument of \
type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long \
long unsigned int'} [-Werror=format=]
257 | dev_dbg(mci->pdev, "dt: /memory node resources: first page \
r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
Use the special %pR format string to pretty-print the entire resource
instead.
Fixes: edfc2d73ca45 ("EDAC/aspeed: Add support for AST2400 and AST2600") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lkml.kernel.org/r/20210421135500.3518661-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
If the vpu is not running, we should not rely on VPU_IDLE_REG
value. In this case, the suspend cb should only unprepare the
clock. This fixes a system-wide suspend to ram failure:
Fixes: 1f565e263c3e ("media: mtk-vpu: VPU should be in idle state before system is suspended") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
i.MX6 device tree include files contain dangling endpoints for the
board device tree writers' convenience. These are still included in
many existing device trees.
Treat dangling endpoints as non-existent to support them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 612b385efb1e ("media: video-mux: Create media links in bound notifier") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Drop an unnecessary include of asm/barrier.h from dirty_log_test.c to
allow the test to build on arm64. arm64, s390, and x86 all build cleanly
without the include (PPC and MIPS aren't supported in KVM's selftests).
arm64's barrier.h includes linux/kasan-checks.h, which is not copied
into tools/.
In file included from ../../../../tools/include/asm/barrier.h:8,
from dirty_log_test.c:19:
.../arm64/include/asm/barrier.h:12:10: fatal error: linux/kasan-checks.h: No such file or directory
12 | #include <linux/kasan-checks.h>
| ^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fixes: 84292e565951 ("KVM: selftests: Add dirty ring buffer test") Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on
default VM") moved vcpu_set_cpuid into vm_create_with_vcpus, but
dirty_log_test doesn't use it to create vm. So vcpu's CPUIDs is
not set, the guest's pa_bits in kvm would be smaller than the
value queried by userspace.
However, the dirty track memory slot is in the highest GPA, the
reserved bits in gpte would be set with wrong pa_bits.
For shadow paging, page fault would fail in permission_fault and
be injected into guest. Since guest doesn't have idt, it finally
leads to vm_exit for triple fault.
Move vcpu_set_cpuid into vm_vcpu_add_default to set supported
CPUIDs on default vcpu, since almost all tests need it.
Fixes: 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM") Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <411ea2173f89abce56fc1fca5af913ed9c5a89c9.1624351343.git.houwenlong93@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Race detected between psi_trigger_destroy/create as shown below, which
cause panic by accessing invalid psi_system->poll_wait->wait_queue_entry
and psi_system->poll_timer->entry->next. Under this modification, the
race window is removed by initialising poll_wait and poll_timer in
group_init which are executed only once at beginning.
The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata. This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.
After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.
The current sun6i SPI implementation initializes the transfer too early,
resulting in SCK going high before the transfer. When using an additional
(gpio) chipselect with sun6i, the chipselect is asserted at a time when
clock is high, making the SPI transfer fail.
This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into
SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer
function, hence, right before the transfer starts, mitigates that
problem.
When PROVE_RAW_LOCK_NESTING=y many of the selftests FAILED because
HARDIRQ context is out-of-bounds for spinlocks. Instead make the
default hardware context the threaded hardirq context, which preserves
the old locking rules.
The wait-type specific locking selftests will have a non-threaded
HARDIRQ variant.
Now cpu.uclamp.min acts as a protection, we need to make sure that the
uclamp request of the task is within the allowed range of the cgroup,
that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and
tg->uclamp[UCLAMP_MAX].
As reported by Xuewen [1] we can have some corner cases where there's
inversion between uclamp requested by task (p) and the uclamp values of
the taskgroup it's attached to (tg). Following table demonstrates
2 corner cases:
Additionally uclamp_update_active_tasks() must now unconditionally
update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for
instance could have an impact on the effective UCLAMP_MIN of the tasks.
DL keeps track of the utilization on a per-rq basis with the structure
avg_dl. This utilization is updated during task_tick_dl(),
put_prev_task_dl() and set_next_task_dl(). However, when the current
running task changes its policy, set_next_task_dl() which would usually
take care of updating the utilization when the rq starts running DL
tasks, will not see a such change, leaving the avg_dl structure outdated.
When that very same task will be dequeued later, put_prev_task_dl() will
then update the utilization, based on a wrong last_update_time, leading to
a huge spike in the DL utilization signal.
The signal would eventually recover from this issue after few ms. Even
if no DL tasks are run, avg_dl is also updated in
__update_blocked_others(). But as the CPU capacity depends partly on the
avg_dl, this issue has nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to DL.
Fixes: 3727e0e ("sched/dl: Add dl_rq utilization tracking") Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/1624271872-211872-3-git-send-email-vincent.donnefort@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.
The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to RT.
Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking") Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Split up the #VC handler code into a from-user and a from-kernel part.
This allows clean and correct state tracking, as the #VC handler needs
to enter NMI-state when raised from kernel mode and plain IRQ state when
raised from user-mode.
Fixes: 62441a1fb532 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The #VC handler only cares about IRQs being disabled while the GHCB is
active, as it must not be interrupted by something which could cause
another #VC while it holds the GHCB (NMI is the exception for which the
backup GHCB exits).
Make sure nothing interrupts the code path while the GHCB is active
by making sure that callers of __sev_{get,put}_ghcb() have disabled
interrupts upfront.
When a log recovery is in progress, lots of operations have to take that
into account, so we keep this status per tree during the operation. Long
time ago error handling revamp patch 79787eaab461 ("btrfs: replace many
BUG_ONs with proper error handling") removed clearing of the status in
an error branch. Add it back as was intended in e02119d5a7b4 ("Btrfs:
Add a write ahead tree log to optimize synchronous operations").
There are probably no visible effects, log replay is done only during
mount and if it fails all structures are cleared so the stale status
won't be kept.
Fixes: 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling") Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit db27f8294cd7 changed eco_mode << (ffs(sreg->eco_mode_mask) - 1)
to sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1) which is wrong.
Fix it by simply set val = sreg->eco_mode_mask.
In additional, sreg->eco_mode_mask can be 0 (LDO3, LDO33, LDO34).
Return -EINVAL if idle mode is not supported when sreg->eco_mode_mask is 0.
While at it, also use unsigned int for reg_val/val which is the expected
type for regmap_read and regmap_update_bits.
Fixes: db27f8294cd7 ("staging: regulator: hi6421v600-regulator: use shorter names for OF properties") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210619123423.4091429-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current code sets config.driver_data to a zero initialized regulator
which is obviously wrong. Fix it.
Fixes: 4618119b9be5 ("regulator: hi655x: enable regulator for hi655x PMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210620132715.60215-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When multiple dtcs share the same IRQ number, the irq_friend which
used to refer to dtc object gets calculated incorrect which leads
to invalid pointer.
Currently pf_fixed is not increased when prefault is true. This is not
correct, since prefault here really means "async page fault completed".
In that case, the original page fault from the guest was morphed into as
async page fault and pf_fixed was not increased. So when prefault
indicates async page fault is completed, pf_fixed should be increased.
Additionally, currently pf_fixed is also increased even when page fault
is spurious, while legacy MMU increases pf_fixed when page fault returns
RET_PF_EMULATE or RET_PF_FIXED.
To fix above two issues, change to increase pf_fixed when return value
is not RET_PF_SPURIOUS (RET_PF_RETRY has already been ruled out by
reaching here).
More information:
https://lore.kernel.org/kvm/cover.1620200410.git.kai.huang@intel.com/T/#mbb5f8083e58a2cd262231512b9211cbe70fc3bd5
Fixes: bb18842e2111 ("kvm: x86/mmu: Add TDP MMU PF handler") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <2ea8b7f5d4f03c99b32bc56fc982e1e4e3d3fc6b.1623717884.git.kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove TDP MMU's call to trace_kvm_mmu_set_spte() that is done for both
shadow-present SPTEs and MMIO SPTEs. It's fully redundant for the
former, and unnecessary for the latter. This aligns TDP MMU tracing
behavior with that of the legacy MMU.
Fixes: 33dd3574f5fe ("kvm: x86/mmu: Add existing trace points to TDP MMU") Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently tdp_mmu_map_handle_target_level() returns 0, which is
RET_PF_RETRY, when page fault is actually fixed. This makes
kvm_tdp_mmu_map() also return RET_PF_RETRY in this case, instead of
RET_PF_FIXED. Fix by initializing ret to RET_PF_FIXED.
Note that kvm_mmu_page_fault() resumes guest on both RET_PF_RETRY and
RET_PF_FIXED, which means in practice returning the two won't make
difference, so this fix alone won't be necessary for stable tree.
Fixes: bb18842e2111 ("kvm: x86/mmu: Add TDP MMU PF handler") Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <f9e8956223a586cd28c090879a8ff40f5eb6d609.1623717884.git.kai.huang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Drop bogus logic that incorrectly clobbers the accessed/dirty enabling
status of the nested MMU on an EPTP switch. When nested EPT is enabled,
walk_mmu points at L2's _legacy_ page tables, not L1's EPT for L2.
This is likely a benign bug, as mmu->ept_ad is never consumed (since the
MMU is not a nested EPT MMU), and stuffing mmu_role.base.ad_disabled will
never propagate into future shadow pages since the nested MMU isn't used
to map anything, just to walk L2's page tables.
Note, KVM also does a full MMU reload, i.e. the guest_mmu will be
recreated using the new EPTP, and thus any change in A/D enabling will be
properly recognized in the relevant MMU.
Fixes: 41ab93727467 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use BIT_ULL() instead of an open-coded shift to check whether or not a
function is enabled in L1's VMFUNC bitmap. This is a benign bug as KVM
supports only bit 0, and will fail VM-Enter if any other bits are set,
i.e. bits 63:32 are guaranteed to be zero.
Note, "function" is bounded by hardware as VMFUNC will #UD before taking
a VM-Exit if the function is greater than 63.
Trigger a full TLB flush on behalf of the guest on nested VM-Enter and
VM-Exit when VPID is disabled for L2. kvm_mmu_new_pgd() syncs only the
current PGD, which can theoretically leave stale, unsync'd entries in a
previous guest PGD, which could be consumed if L2 is allowed to load CR3
with PCID_NOFLUSH=1.
Rename KVM_REQ_HV_TLB_FLUSH to KVM_REQ_TLB_FLUSH_GUEST so that it can
be utilized for its obvious purpose of emulating a guest TLB flush.
Note, there is no change the actual TLB flush executed by KVM, even
though the fast PGD switch uses KVM_REQ_TLB_FLUSH_CURRENT. When VPID is
disabled for L2, vpid02 is guaranteed to be '0', and thus
nested_get_vpid02() will return the VPID that is shared by L1 and L2.
Generate the request outside of kvm_mmu_new_pgd(), as getting the common
helper to correctly identify which requested is needed is quite painful.
E.g. using KVM_REQ_TLB_FLUSH_GUEST when nested EPT is in play is wrong as
a TLB flush from the L1 kernel's perspective does not invalidate EPT
mappings. And, by using KVM_REQ_TLB_FLUSH_GUEST, nVMX can do future
simplification by moving the logic into nested_vmx_transition_tlb_flush().
Fixes: 41fab65e7c44 ("KVM: nVMX: Skip MMU sync on nested VMX transition when possible") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fans 7..12 do not have their own set of configuration registers.
So far the code ignored that and read beyond the end of the configuration
register range to get the tachometer period. This resulted in more or less
random fan speed values for those fans.
The datasheet is quite vague when it comes to defining the tachometer
period for fans 7..12. Experiments confirm that the period is the same
for both fans associated with a given set of configuration registers.
Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Valid Maxim Integrated ACPI device IDs would start with MXIM,
not with MAX1. On top of that, ACPI device IDs reflecting chip names
are almost always invalid.
Remove the invalid ACPI IDs.
Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
None of the ACPI IDs introduced with the reverted patch is a valid ACPI
device ID. Any ACPI users of this driver are advised to use PRP0001 and
a devicetree-compatible device identification.
Fixes: b58bd4c6dfe7 ("hwmon: (lm70) Add support for ACPI") Cc: Andrej Picej <andpicej@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current RDACM21 initialization routine powers up the OV10640 image
sensor after the OV490 ISP. The ISP is programmed with a firmware loaded
from an embedded serial flash that (most probably) tries to interact and
program also the image sensor connected to the ISP.
As described in commit "media: i2c: rdacm21: Fix OV10640 powerup" the
image sensor powerdown signal is kept high by an internal pull up
resistor and occasionally fails to startup correctly if the powerdown
line is not asserted explicitly. Failures in the OV10640 startup causes
the OV490 firmware to fail to boot correctly resulting in the camera
module initialization to fail consequentially.
Fix this by powering up the OV10640 image sensor before testing the
OV490 firmware boot completion, by splitting the ov10640_initialize()
function in an ov10640_power_up() one and an ov10640_check_id() one.
Also make sure the OV10640 identification procedure gives enough time to
the image sensor to resume after the programming phase performed by the
OV490 firmware by repeating the ID read procedure.
This commit fixes a sporadic start-up error triggered by a failure to
detect the OV490 firmware boot completion:
rdacm21 8-0054: Timeout waiting for firmware boot
The OV10640 image sensor powerdown signal is controlled by the first
line of the OV490 GPIO pad #1, but the pad #0 identifier
OV490_GPIO_OUTPUT_VALUE0 was erroneously used. As a result the image
sensor powerdown signal was never asserted but was left floating and
kept high by an internal pull-up resistor, causing sporadic failures
during the image sensor startup phase.
Fix this by using the correct GPIO pad identifier and wait the mandatory
1.5 millisecond delay after the powerup lane is asserted. The reset
delay is not characterized in the chip manual if not as "255 XVCLK +
initialization". Wait for at least 3 milliseconds to guarantee the SCCB
bus is available.
While at it also fix the reset sequence, as the reset line was released
before the powerdown one, and the line was not cycled.
This commit fixes a sporadic start-up error triggered by a failure to
read the OV10640 chip ID:
rdacm21 8-0054: OV10640 ID mismatch: (0x01)
Converting the VIDIOC_DQEVENT_TIME32/VIDIOC_DQEVENT32/
VIDIOC_DQEVENT32_TIME32 arguments to the canonical form is done in common
code, but for some reason I ended up adding another conversion helper to
subdev_do_ioctl() as well. I must have concluded that this does not go
through the common conversion, but it has done that since the ioctl
handler was first added.
I assume this one is harmless as there should be no way to arrive here
from user space if CONFIG_COMPAT_32BIT_TIME is set, but since it is dead
code, it should just get removed.
On a 64-bit architecture, as well as a 32-bit architecture without
CONFIG_COMPAT_32BIT_TIME, handling this command is a mistake,
and the kernel should return an error.
Syzbot found that passing ioctl command 0xc0505609 into a 64-bit
kernel from a 32-bit process causes uninitialized kernel memory to
get passed to drivers instead of the user space data:
The time32 commands are defined but were never meant to be called on
64-bit machines, as those have always used time64 interfaces. I missed
this in my patch that introduced the time64 handling on 32-bit platforms.
The problem in this case is the mismatch of one function checking for
the numeric value of the command and another function checking for the
type of process (native vs compat) instead, with the result being that
for this combination, nothing gets copied into the buffer at all.
Avoid this by only trying to convert the time32 commands when running
on a 32-bit kernel where these are defined in a meaningful way.
When using CONFIG_ARM64_SW_TTBR0_PAN, a task's thread_info::ttbr0 must be
the TTBR0_EL1 value used to run userspace. With 52-bit PAs, the PA must be
packed into the TTBR using phys_to_ttbr(), but we forget to do this in some
of the SW PAN code. Thus, if the value is installed into TTBR0_EL1 (as may
happen in the uaccess routines), this could result in UNPREDICTABLE
behaviour.
Since hardware with 52-bit PA support almost certainly has HW PAN, which
will be used in preference, this shouldn't be a practical issue, but let's
fix this for consistency.
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: 529c4b05a3cb ("arm64: handle 52-bit addresses in TTBR") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1623749578-11231-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
SM2 module alloc ec->Q in sm2_set_pub_key(), when doing alg test in
test_akcipher_one(), it will set public key for every test vector,
and don't free ec->Q. This will cause a memory leak.
In curve25519_mod_init() the curve25519_alg will be registered only when
(X86_FEATURE_BMI2 && X86_FEATURE_ADX). But in curve25519_mod_exit()
it still checks (X86_FEATURE_BMI2 || X86_FEATURE_ADX) when do crypto
unregister. This will trigger a BUG_ON in crypto_unregister_alg() as
alg->cra_refcnt is 0 if the cpu only supports one of X86_FEATURE_BMI2
and X86_FEATURE_ADX.
Fixes: 07b586fe0662 ("crypto: x86/curve25519 - replace with formally verified implementation") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 604c31039dae4 ("crypto: omap-sham - Check for return value from pm_runtime_get_sync") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():
the out-of-bounds warnings are actually valid and should be addressed.
Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.
This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1003 | trigger_msg->msg_data[1] = 6; /* Priority */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1005 | trigger_msg->msg_data[3] = 0; /* Parameter */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1006 | trigger_msg->msg_data[4] = 4; /* Task ID */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
Fixes: 018b0c6f8acb ("[media] siano: make load firmware logic to work with newer firmwares") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the code for ATARI_KBD_CORE does not use drivers/input/keyboard/
code, just move ATARI_KBD_CORE to arch/m68k/Kconfig.machine to remove
the dependency on INPUT_KEYBOARD.
Removes this kconfig warning:
WARNING: unmet direct dependencies detected for ATARI_KBD_CORE
Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n]
Selected by [y]:
- MOUSE_ATARI [=y] && !UML && INPUT [=y] && INPUT_MOUSE [=y] && ATARI [=y]
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the gl860_RTx() helper so that zero-length control reads fail with
an error message instead. Note that there are no current callers that
would trigger this.
Fixes: 4f7cb8837cec ("V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Replace BIT() in v4l2's UPAI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: 206bc0f6fb94 ("media: vicodec: mark the stateless FWHT API as stable") Signed-off-by: Joe Richey <joerichey@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the CSI bps per lane is not in the valid range, an appropriate error
code -EINVAL should be returned. However, we currently do not explicitly
assign this error code to 'ret'. As a result, 0 was incorrectly returned.
Fixes: 256148246852 ("[media] tc358743: support probe from device tree") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The media_device_usb_allocate() function returns error pointers when
it's enabled and something goes wrong. It can return NULL as well, but
only if CONFIG_MEDIA_CONTROLLER is disabled so that doesn't apply here.
Fixes: 812658d88d26 ("media: change au0828 to use Media Device Allocator API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In isp_video_release, file->private_data is freed via
_vb2_fop_release()->v4l2_fh_release(). But the freed
file->private_data is still used in v4l2_fh_is_singular_file()
->v4l2_fh_is_singular(file->private_data), which is a use
after free bug.
My patch uses a variable 'is_singular_file' to avoid the uaf.
v3: https://lore.kernel.org/patchwork/patch/1419058/
The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.
If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in rkvdec-h264.c.
[Changed the comment and used V4L2_TYPE_IS_CAPTURE macro]
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we continue, due to device is disabled, loop we have to drop
reference count. When we have an array full of devices we have to also
drop the reference count. Note, in this case the
cio2_bridge_unregister_sensors() is called by the caller.
Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver") Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Will reported that the 'XXX __migrate_task() can fail' in migration_cpu_stop()
can happen, and it *is* sort of a big deal. Looking at it some more, one
will note there is a glaring hole in the deferred CPU selection:
(w/ CONFIG_CPUSET=n, so that the affinity mask passed via taskset doesn't
get AND'd with cpu_online_mask)
$ taskset -pc 0-2 $PID
# offline CPUs 3-4
$ taskset -pc 3-5 $PID
`\
$PID may stay on 0-2 due to the cpumask_any_distribute() picking an
offline CPU and __migrate_task() refusing to do anything due to
cpu_is_allowed().
set_cpus_allowed_ptr() goes to some length to pick a dest_cpu that matches
the right constraints vs affinity and the online/active state of the
CPUs. Reuse that instead of discarding it in the affine_move_task() case.
Fixes: 6d337eab041d ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210526205751.842360-2-valentin.schneider@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Some arches (um, sparc64, riscv, xtensa) cause a Kconfig warning for
LOCKDEP.
These arch-es select LOCKDEP_SUPPORT but they are not listed as one
of the arch-es that LOCKDEP depends on.
Since (16) arch-es define the Kconfig symbol LOCKDEP_SUPPORT if they
intend to have LOCKDEP support, replace the awkward list of
arch-es that LOCKDEP depends on with the LOCKDEP_SUPPORT symbol.
But wait. LOCKDEP_SUPPORT is included in LOCK_DEBUGGING_SUPPORT,
which is already a dependency here, so LOCKDEP_SUPPORT is redundant
and not needed.
That leaves the FRAME_POINTER dependency, but it is part of an
expression like this:
depends on (A && B) && (FRAME_POINTER || B')
where B' is a dependency of B so if B is true then B' is true
and the value of FRAME_POINTER does not matter.
Thus we can also delete the FRAME_POINTER dependency.
Fixes this kconfig warning: (for um, sparc64, riscv, xtensa)
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream, as it should have been done from the start...
'ret' is known to be 1 here. In fact 'i' is expected instead.
Store the return value of 'i2c_master_recv()' in 'ret' so that the error
message print the correct error code.
The pm_runtime APIs added first in commit 7694b6ca649f ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit 13343badae09 ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.
Fixes: 13343badae09 ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes: f00d79750712 ("EVM: Allow userspace to signal an RSA key has been loaded") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected. Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...
"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
cpu.uclamp.min is a protection as described in cgroup-v2 Resource
Distribution Model
Documentation/admin-guide/cgroup-v2.rst
which means we try our best to preserve the minimum performance point of
tasks in this group. See full description of cpu.uclamp.min in the
cgroup-v2.rst.
But the current implementation makes it a limit, which is not what was
intended.
With this change the cgroup and per-task behaviors are the same, as
expected.
Additionally, we remove the confusing relationship between cgroup and
!user_defined flag.
We don't want for example RT tasks that are boosted by default to max to
change their boost value when they attach to a cgroup. If a cgroup wants
to limit the max performance point of tasks attached to it, then
cpu.uclamp.max must be set accordingly.
Or if they want to set different boost value based on cgroup, then
sysctl_sched_util_clamp_min_rt_default must be used to NOT boost to max
and set the right cpu.uclamp.min for each group to let the RT tasks
obtain the desired boost value when attached to that group.
As it stands the dependency on !user_defined flag adds an extra layer of
complexity that is not required now cpu.uclamp.min behaves properly as
a protection.
The propagation model of effective cpu.uclamp.min in child cgroups as
implemented by cpu_util_update_eff() is still correct. The parent
protection sets an upper limit of what the child cgroups will
effectively get.
Fixes: 3eac870a3247 (sched/uclamp: Use TG's clamps to restrict TASK's clamps) Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210510145032.1934078-2-qais.yousef@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
If pm_runtime resume logic fails, return the error code
provided by it, instead of -EAGAIN, as, depending on what
caused it to fail, it may not be something that would be
recovered.
Fixes: cbba45d43631 ("[media] smiapp: Use runtime PM") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
The Venus code has a sort of watchdog that attempts to recover
from IP errors, implemented as a delayed work job, which
calls venus_sys_error_handler().
Right now, it has several issues:
1. It assumes that PM runtime resume never fails
2. It internally runs two while() loops that also assume that
PM runtime will never fail to go idle:
while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
msleep(10);
...
while (core->pmdomains[0] && pm_runtime_active(core->pmdomains[0]))
usleep_range(1000, 1500);
3. It uses an OR to merge all return codes and then report to the user
4. If the hardware never recovers, it keeps running on every 10ms,
flooding the syslog with 2 messages (so, up to 200 messages
per second).
Rework the code, in order to prevent that, by:
1. check the return code from PM runtime resume;
2. don't let the while() loops run forever;
3. store the failed event;
4. use warn ratelimited when it fails to recover.
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ffz(), that has been used to count unused native CSs,
might cause undefined behaviour when called against ~0U.
To fix that, open code it with ffs(~value) - 1.
Fixes: 7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164425.40287-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 7d93aecdb58d ("spi: Add generic support for unused native cs
with cs-gpios") excludes the valid case for the controllers that doesn't
need to switch native CS in order to perform the transfer, i.e. when
where <n> defines maximum of native CSs supported by the controller.
To allow this, bail out from spi_get_gpio_descs() conditionally for
the controllers which explicitly marked with SPI_MASTER_GPIO_SS.
Fixes: 7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164425.40287-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c65e774fb3f6 ("x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variable")
made PTRS_PER_P4D variable on x86 and introduced MAX_PTRS_PER_P4D as a
constant for cases which need a compile-time constant (e.g. fixed-size
arrays).
powerpc likewise has boot-time selectable MMU features which can cause
other mm "constants" to vary. For KASAN, we have some static
PTE/PMD/PUD/P4D arrays so we need compile-time maximums for all these
constants. Extend the MAX_PTRS_PER_ idiom, and place default definitions
in include/pgtable.h. These define MAX_PTRS_PER_x to be PTRS_PER_x unless
an architecture has defined MAX_PTRS_PER_x in its arch headers.
Clean up pgtable-nop4d.h and s390's MAX_PTRS_PER_P4D definitions while
we're at it: both can just pick up the default now.
isw_nr_in_flight is used to determine whether the inode switch queue
should be flushed from the umount path. Currently it's increased after
grabbing an inode and even scheduling the switch work. It means the
umount path can walk past cleanup_offline_cgwb() with active inode
references, which can result in a "Busy inodes after unmount." message and
use-after-free issues (with inode->i_sb which gets freed).
Fix it by incrementing isw_nr_in_flight before doing anything with the
inode and decrementing in the case when switching wasn't scheduled.
The problem hasn't yet been seen in the real life and was discovered by
Jan Kara by looking into the code.
Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
kthread_mod_delayed_work() might race with
kthread_cancel_delayed_work_sync() or another kthread_mod_delayed_work()
call. The function lets the other operation win when it sees
work->canceling counter set. And it returns @false.
But it should return @true as it is done by the related workqueue API, see
mod_delayed_work_on().
The reason is that the return value might be used for reference counting.
It has to distinguish the case when the number of queued works has changed
or stayed the same.
The change is safe. kthread_mod_delayed_work() return value is not
checked anywhere at the moment.
Link: https://lore.kernel.org/r/20210521163526.GA17916@redhat.com Link: https://lkml.kernel.org/r/20210610133051.15337-4-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Minchan Kim <minchan@google.com> Cc: <jenhaochen@google.com> Cc: Martin Liu <liumartin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:
if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.
Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.
Based on analysis from Wang Shanker.
Cc: Christoph Hellwig <hch@lst.de> Reported-by: Wang Shanker <shankerwangmiao@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because MSM8939 has 3 APCS instances for Cluster0 (little cores),
Cluster1 (big cores) and CCI (Cache Coherent Interconnect). Although
only APCS of Cluster0 and Cluster1 have IPC bits, each of 3 APCS has
A53PLL clock control bits. That said, 3 'qcom-apcs-msm8916-clk' devices
need to be registered to instantiate all 3 clocks. Use PLATFORM_DEVID_AUTO
rather than PLATFORM_DEVID_NONE for platform_device_register_data() call
to fix the issue above.
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition") Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
