The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support") Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270 Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running these commands on DUT (and similar at the other end)
ip link set dev eth0 up
ip link add link eth0 name eth0.10 type vlan id 10
ip addr add 10.0.0.1/24 dev eth0.10
ip link set dev eth0.10 up
ping 10.0.0.2
The ping will fail.
The reason why is failing is because, the network interfaces for lan966x
have a flag saying that the HW can insert the vlan tags into the
frames(NETIF_F_HW_VLAN_CTAG_TX). Meaning that the frames that are
transmitted don't have the vlan tag inside the skb data, but they have
it inside the skb. We already get that vlan tag and put it in the IFH
but the problem is that we don't configure the HW to rewrite the frame
when the interface is in host mode.
The fix consists in actually configuring the HW to insert the vlan tag
if it is different than 0.
The "freq" variable is in terms of MHz and "max_val_cycles" is in terms
of Hz. The fact that "max_val_cycles" is a u64 suggests that support
for high frequency is intended but the "freq_khz * 1000" would overflow
the u32 type if we went above 4GHz. Use unsigned long long type for the
mutliplication to prevent that.
Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/aDbFHe19juIJKjsb@stanley.mountain Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Identify the cause of the suspend/resume hang: netif_carrier_off()
is called during link state changes and becomes stuck while
executing linkwatch_work().
To resolve this issue, call netif_device_detach() during the Ethernet
suspend process to temporarily detach the network device from the
kernel and prevent the suspend/resume hang.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Yanqing Wang <ot_yanqing.wang@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Biao Huang <biao.huang@mediatek.com> Link: https://patch.msgid.link/20250528075351.593068-1-macpaul.lin@mediatek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported a refcount warning [1] caused by calling get_net() on
a network namespace that is being destroyed (refcount=0). This happens
when a TIPC discovery timer fires during network namespace cleanup.
The recently added get_net() call in commit e279024617134 ("net/tipc:
fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to
hold a reference to the network namespace. However, if the namespace
is already being destroyed, its refcount might be zero, leading to the
use-after-free warning.
Replace get_net() with maybe_get_net(), which safely checks if the
refcount is non-zero before incrementing it. If the namespace is being
destroyed, return -ENODEV early, after releasing the bearer reference.
Previously, the RX_BUFFERS_POSTED stat incorrectly reported the
fill_cnt from RX queue 0 for all queues, resulting in inaccurate
per-queue statistics.
Fix this by correctly indexing priv->rx[idx].fill_cnt for each RX queue.
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250527130830.1812903-1-alok.a.tiwari@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.
This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.
This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.
Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.
Fixes: 25c83b5c2e82 ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710") Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver") Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The above would result in priv->enabled == false, but IRQ left enabled.
Protect both write (above race) and read (to propagate the value on SMP)
callbacks with a mutex.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter") Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20250331163642.2382651-1-alexander.sverdlin@siemens.com Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB}
and for sinc3 the factor is 0.272 according to the data sheets for
ad7124-4 (Rev. E.) and ad7124-8 (Rev. F).
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Brian Pellegrino <bpellegrino@arka.org> Signed-off-by: Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Search for the minimum error while ensuring that the LPF corner
frequency is greater than the target, and the HPF corner frequency
is lower than the target
This fixes issues where the range calculations were suboptimal.
Add two new DTS properties to set the margin between the input frequency
and the calculated corner frequency
Reorder the initialization sequence in `usbhs_probe()` to enable runtime
PM before accessing registers, preventing potential crashes due to
uninitialized clocks.
Currently, in the probe path, registers are accessed before enabling the
clocks, leading to a synchronous external abort on the RZ/V2H SoC.
The problematic call flow is as follows:
Since `iowrite16()` is performed without ensuring the required clocks are
enabled, this can lead to access errors. To fix this, enable PM runtime
early in the probe function and ensure clocks are acquired before register
access, preventing crashes like the following on RZ/V2H:
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Reviewed-by: Nathan Lynch <nathan.lynch@amd.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20250402023900.43440-1-bsdhenrymartin@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: a5d6b1ac56cb ("phy: qcom-qmp-usb: fix memleak on probe deferral") CC: Johan Hovold <johan@kernel.org> CC: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250414125050.2118619-1-chenyuan0y@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the call to pci_host_probe() in cdns_pcie_host_setup() fails, PM
runtime count is decremented in the error path using pm_runtime_put_sync().
But the runtime count is not incremented by this driver, but only by the
callers (cdns_plat_pcie_probe/j721e_pcie_probe). And the callers also
decrement the runtime PM count in their error path. So this leads to the
below warning from the PM core:
"runtime PM usage count underflow!"
So fix it by getting rid of pm_runtime_put_sync() in the error path and
directly return the errno.
The DT bindings for this driver define the interrupts in the order as
they are numbered in the interrupt controller. The old platform_data,
however, listed them in a different order. So, for DT based platforms,
they are mixed up. Assign them specifically for DT, so we can keep the
bindings stable. After the fix, 'rtctest' passes again on the Renesas
Genmai board (RZ-A1 / R7S72100).
In some scenarios, when mounting NFS, more than one superblock may be
created. The final superblock used is the last one created, but only the
first superblock carries the ro flag passed from user space. If a ro flag
is added to the superblock via remount, it will trigger the issue
described in Link[1].
Link[2] attempted to address this by marking the superblock as ro during
the initial mount. However, this introduced a new problem in scenarios
where multiple mount points share the same superblock:
[root@a ~]# mount /dev/sdb /mnt/sdb
[root@a ~]# echo "/mnt/sdb *(rw,no_root_squash)" > /etc/exports
[root@a ~]# echo "/mnt/sdb/test_dir2 *(ro,no_root_squash)" >> /etc/exports
[root@a ~]# systemctl restart nfs-server
[root@a ~]# mount -t nfs -o rw 127.0.0.1:/mnt/sdb/test_dir1 /mnt/test_mp1
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (rw,relatime,...
[root@a ~]# mount -t nfs -o ro 127.0.0.1:/mnt/sdb/test_dir2 /mnt/test_mp2
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (ro,relatime,...
127.0.0.1:/mnt/sdb/test_dir2 on /mnt/test_mp2 type nfs4 (ro,relatime,...
[root@a ~]#
When mounting the second NFS, the shared superblock is marked as ro,
causing the previous NFS mount to become read-only.
To resolve both issues, the ro flag is no longer applied to the superblock
during remount. Instead, the ro flag on the mount is used to control
whether the mount point is read-only.
Fixes: 281cad46b34d ("NFS: Create a submount rpc_op")
Link[1]: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Link[2]: https://lore.kernel.org/all/20241130035818.1459775-1-lilingfeng3@huawei.com/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the link, commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when
mounting nfs") removed the check for the ro flag when determining whether
to share the superblock, which caused issues when mounting different
subdirectories under the same export directory via NFSv3. However, this
change did not affect NFSv4.
For NFSv3:
1) A single superblock is created for the initial mount.
2) When mounted read-only, this superblock carries the SB_RDONLY flag.
3) Before commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs"):
Subsequent rw mounts would not share the existing ro superblock due to
flag mismatch, creating a new superblock without SB_RDONLY.
After the commit:
The SB_RDONLY flag is ignored during superblock comparison, and this leads
to sharing the existing superblock even for rw mounts.
Ultimately results in write operations being rejected at the VFS layer.
For NFSv4:
1) Multiple superblocks are created and the last one will be kept.
2) The actually used superblock for ro mounts doesn't carry SB_RDONLY flag.
Therefore, commit 52cb7f8f1778 doesn't affect NFSv4 mounts.
Clear SB_RDONLY before getting superblock when NFS_MOUNT_UNSHARED is not
set to fix it.
Fixes: 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs") Closes: https://lore.kernel.org/all/12d7ea53-1202-4e21-a7ef-431c94758ce5@app.fastmail.com/T/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc558297222d9 ("perf tests: Add a test for tracking with sched_switch") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: James Clark <james.clark@linaro.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
The script allows the user to enter patterns to find symbols.
The pattern matching characters are converted for use in SQL.
For PostgreSQL the conversion involves using the Python maketrans()
method which is slightly different in Python 3 compared with Python 2.
Fix to work in Python 3.
Fixes: beda0e725e5f06ac ("perf script python: Add Python3 support to exported-sql-viewer.py") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tony Jones <tonyj@suse.de> Link: https://lore.kernel.org/r/20250512093932.79854-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Fixes commit did not add support for decoding PEBS-via-PT data_src.
Fix by adding support.
PEBS-via-PT is a feature of some E-core processors, starting with
processors based on Tremont microarchitecture. Because the kernel only
supports Intel PT features that are on all processors, there is no support
for PEBS-via-PT on hybrids.
Currently that leaves processors based on Tremont, Gracemont and Crestmont,
however there are no events on Tremont that produce data_src information,
and for Gracemont and Crestmont there are only:
Prevent a potential invalid memory access when the requested sensor
is not found.
find_ec_sensor_index() may return a negative value (e.g. -ENOENT),
but its result was used without checking, which could lead to
undefined behavior when passed to get_sensor_info().
Add a proper check to return -EINVAL if sensor_index is negative.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by: Alexei Safin <a.safin@rosa.ru> Link: https://lore.kernel.org/r/20250424202654.5902-1-a.safin@rosa.ru
[groeck: Return error code returned from find_ec_sensor_index] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org> Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With request-based dm, the mempools don't need reloading when switching
tables, but the unused table mempools are not freed until the active
table is finally freed. Free them immediately if they are not needed.
Fixes: 29dec90a0f1d9 ("dm: fix bio_set allocation") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
__bind was changing the disk capacity, geometry and mempools of the
mapped device before calling dm_table_set_restrictions() which could
fail, forcing dm to drop the new table. Failing here would leave the
device using the old table but with the wrong capacity and mempools.
Move dm_table_set_restrictions() earlier in __bind(). Since it needs the
capacity to be set, save the old version and restore it on failure.
Fixes: bb37d77239af2 ("dm: introduce zone append emulation") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct
perf_hpp_list") it assumes that act->thread is set prior to calling
do_zoom_thread().
This doesn't happen when we use ESC or the Left arrow key to Zoom out of
a specific thread, making this operation not to work and we get stuck
into the thread zoom.
In 6422184b087ff435 ("perf hists browser: Simplify zooming code using
pstack_peek()") it says no need to set actions->thread, and at that
point that was true, but in 7cecb7fe8388d5c3 a actions->thread == NULL
check was added before the zoom out of thread could kick in.
We can zoom out using the alternative 't' thread zoom toggle hotkey to
finally set actions->thread before calling do_zoom_thread() and zoom
out, but lets also fix the ESC/Zoom out of thread case.
Fixes: 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct perf_hpp_list") Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: c7a14fdcb3fa7736 ("perf build-ids: Fall back to debuginfod query if debuginfo not found") Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on changes in the 2021 public version of the randstruct
out-of-tree GCC plugin[1], more carefully update the attributes on
resulting decls, to avoid tripping checks in GCC 15's
comptypes_check_enum_int() when it has been configured with
"--enable-checking=misc":
arch/arm64/kernel/kexec_image.c:132:14: internal compiler error: in comptypes_check_enum_int, at c/c-typeck.cc:1519
132 | const struct kexec_file_ops kexec_image_ops = {
| ^~~~~~~~~~~~~~
internal_error(char const*, ...), at gcc/gcc/diagnostic-global-context.cc:517
fancy_abort(char const*, int, char const*), at gcc/gcc/diagnostic.cc:1803
comptypes_check_enum_int(tree_node*, tree_node*, bool*), at gcc/gcc/c/c-typeck.cc:1519
...
When building the randomized replacement tree of struct members, the
randstruct GCC plugin would insert, as the first member, a 0-sized void
member. This appears as though it was done to catch non-designated
("unnamed") static initializers, which wouldn't be stable since they
depend on the original struct layout order.
This was accomplished by having the side-effect of the "void member"
tripping an assert in GCC internals (count_type_elements) if the member
list ever needed to be counted (e.g. for figuring out the order of members
during a non-designated initialization), which would catch impossible type
(void) in the struct:
security/landlock/fs.c: In function ‘hook_file_ioctl_common’:
security/landlock/fs.c:1745:61: internal compiler error: in count_type_elements, at expr.cc:7075
1745 | .u.op = &(struct lsm_ioctlop_audit) {
| ^
However this is a redundant safety measure since randstruct uses the
__designated_initializer attribute both internally and within the
__randomized_layout attribute macro so that this would be enforced
by the compiler directly even when randstruct was not enabled (via
-Wdesignated-init).
A recent change in Landlock ended up tripping the same member counting
routine when using a full-struct copy initializer as part of an anonymous
initializer. This, however, is a false positive as the initializer is
copying between identical structs (and hence identical layouts). The
"path" member is "struct path", a randomized struct, and is being copied
to from another "struct path", the "f_path" member:
As can be seen with the coming randstruct KUnit test, there appears to
be no behavioral problems with this kind of initialization when the void
member is removed from the randstruct GCC plugin, so remove it.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org> Closes: https://lore.kernel.org/lkml/Z_PRaKx7q70MKgCA@gallifrey/ Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/ Reported-by: WangYuli <wangyuli@uniontech.com> Closes: https://lore.kernel.org/lkml/337D5D4887277B27+3c677db3-a8b9-47f0-93a4-7809355f1381@uniontech.com/ Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin") Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
devm_kasprintf() returns NULL when memory allocation fails. Currently,
aspeed_lpc_enable_snoop() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250401074647.21300-1-bsdhenrymartin@gmail.com
[arj: Fix Fixes: tag to use subject from 3772e5da4454] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f24 ("drm/mediatek: stop selecting foreign drivers") Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
In preparation for writing logs, in nilfs_btree_propagate(), which makes
parent and ancestor node blocks dirty starting from a modified data block
or b-tree node block, if the starting block does not belong to the b-tree,
i.e. is isolated, nilfs_btree_do_lookup() called within the function
fails with -ENOENT.
In this case, even though -ENOENT is an internal code, it is propagated to
the log writer via nilfs_bmap_propagate() and may be erroneously returned
to system calls such as fsync().
Fix this issue by changing the error code to -EINVAL in this case, and
having the bmap layer detect metadata corruption and convert the error
code appropriately.
Link: https://lkml.kernel.org/r/20250428173808.6452-3-konishi.ryusuke@gmail.com Fixes: 1f5abe7e7dbc ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "nilfs2: improve sanity checks in dirty state propagation".
This fixes one missed check for block mapping anomalies and one improper
return of an error code during a preparation step for log writing, thereby
improving checking for filesystem corruption on writeback.
This patch (of 2):
In nilfs_direct_propagate(), the printer get from nilfs_direct_get_ptr()
need to be checked to ensure it is not an invalid pointer.
If the pointer value obtained by nilfs_direct_get_ptr() is
NILFS_BMAP_INVALID_PTR, means that the metadata (in this case, i_bmap in
the nilfs_inode_info struct) that should point to the data block at the
buffer head of the argument is corrupted and the data block is orphaned,
meaning that the file system has lost consistency.
Add a value check and return -EINVAL when it is an invalid pointer.
If ocfs2_finish_quota_recovery() exits due to an error before passing all
rc_list elements to ocfs2_recover_local_quota_file() then it can lead to a
memory leak as rc_list may still contain elements that have to be freed.
Release all memory allocated by ocfs2_add_recovery_chunk() using
ocfs2_free_quota_recovery() instead of kfree().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Link: https://lkml.kernel.org/r/20250402065628.706359-2-m.masimov@mt-integration.ru Fixes: 2205363dce74 ("ocfs2: Implement quota recovery") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
The 'compatible' property is required by the
'mfd/mediatek,mt6397.yaml' binding. Add it to fix the following
dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: regulators:
'compatible' is a required property
Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes") Signed-off-by: Julien Massot <julien.massot@collabora.com> Link: https://lore.kernel.org/r/20250505-mt8395-dtb-errors-v1-3-9c4714dcdcdb@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
By hardware, the first and second core of the video decoder IP
need the VDEC_SOC to be powered up in order to be able to be
accessed (both internally, by firmware, and externally, by the
kernel).
Similarly, for the video encoder IP, the second core needs the
first core to be powered up in order to be accessible.
Fix that by reparenting the VDEC1/2 power domains to be children
of VDEC0 (VDEC_SOC), and the VENC1 to be a child of VENC0.
NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.
Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
We have noticed that when PHY timestamping is enabled, L2 frames seems
to be modified by changing two 2 bytes with a value of 0. The place were
these 2 bytes seems to be random(or I couldn't find a pattern). In most
of the cases the userspace can ignore these frames but if for example
those 2 bytes are in the correction field there is nothing to do. This
seems to happen when configuring the HW for IPv4 even that the flow is
not enabled.
These 2 bytes correspond to the UDPv4 checksum and once we don't enable
clearing the checksum when using L2 frames then the frame doesn't seem
to be changed anymore.
The unexpected MPLS packet may not end with the bottom label stack.
When there are many stacks, The label count value has wrapped around.
A dead loop occurs, soft lockup/CPU stuck finally.
stack backtrace:
UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26
index -1 is out of range for type '__be32 [3]'
CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu
Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021
Call Trace:
<IRQ>
show_stack+0x52/0x5c
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_out_of_bounds.cold+0x44/0x49
key_extract_l3l4+0x82a/0x840 [openvswitch]
? kfree_skbmem+0x52/0xa0
key_extract+0x9c/0x2b0 [openvswitch]
ovs_flow_key_extract+0x124/0x350 [openvswitch]
ovs_vport_receive+0x61/0xd0 [openvswitch]
? kernel_init_free_pages.part.0+0x4a/0x70
? get_page_from_freelist+0x353/0x540
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23a/0xf00
__netif_receive_skb_list_core+0xfa/0x240
netif_receive_skb_list_internal+0x18e/0x2a0
napi_complete_done+0x7a/0x1c0
bnxt_poll+0x155/0x1c0 [bnxt_en]
__napi_poll+0x30/0x180
net_rx_action+0x126/0x280
? bnxt_msix+0x67/0x80 [bnxt_en]
handle_softirqs+0xda/0x2d0
irq_exit_rcu+0x96/0xc0
common_interrupt+0x8e/0xa0
</IRQ>
Fixes: fbdcdd78da7c ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction") Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzkaller reported a null-ptr-deref in txopt_get(). [0]
The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo,
so struct ipv6_pinfo was NULL there.
However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6
is always set in inet6_create(), meaning the socket was not IPv6 one.
The root cause is missing validation in netlbl_conn_setattr().
netlbl_conn_setattr() switches branches based on struct
sockaddr.sa_family, which is passed from userspace. However,
netlbl_conn_setattr() does not check if the address family matches
the socket.
The syzkaller must have called connect() for an IPv6 address on
an IPv4 socket.
We have a proper validation in tcp_v[46]_connect(), but
security_socket_connect() is called in the earlier stage.
Let's copy the validation to netlbl_conn_setattr().
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=M1LzunrcQB1fSGauMrJrhL6GGps5cPAKzHJXj6GQV+-g@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250522221858.91240-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix memory leak when running one-step timestamping. When running
one-step sync timestamping, the HW is configured to insert the TX time
into the frame, so there is no reason to keep the skb anymore. As in
this case the HW will never generate an interrupt to say that the frame
was timestamped, then the frame will never released.
Fix this by freeing the frame in case of one-step timestamping.
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com Fixes: fa9dd599b4da ("bpf: get rid of pure_initcall dependency to enable jits") Signed-off-by: KaFai Wan <mannkafai@gmail.com> Link: https://lore.kernel.org/r/20250526133358.2594176-1-mannkafai@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cited commit fixed a crash when cma_netevent_callback was called for
a cma_id while work on that id from a previous call had not yet started.
The work item was re-initialized in the second call, which corrupted the
work item currently in the work queue.
However, it left a problem when queue_work fails (because the item is
still pending in the work queue from a previous call). In this case,
cma_id_put (which is called in the work handler) is therefore not
called. This results in a userspace process hang (zombie process).
Fix this by calling cma_id_put() if queue_work fails.
Fixes: 45f5dcdd0497 ("RDMA/cma: Fix workqueue crash in cma_netevent_work_handler") Link: https://patch.msgid.link/r/4f3640b501e48d0166f312a64fdadf72b059bd04.1747827103.git.leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@nvidia.com> Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller, courtesy of syzbot, identified an error (see report [1]) in
aqc111 driver, caused by incomplete sanitation of usb read calls'
results. This problem is quite similar to the one fixed in commit 920a9fa27e78 ("net: asix: add proper error handling of usb read errors").
For instance, usbnet_read_cmd() may read fewer than 'size' bytes,
even if the caller expected the full amount, and aqc111_read_cmd()
will not check its result properly. As [1] shows, this may lead
to MAC address in aqc111_bind() being only partly initialized,
triggering KMSAN warnings.
Fix the issue by verifying that the number of bytes read is
as expected and not less.
The sk->sk_socket is not locked or referenced in backlog thread, and
during the call to skb_send_sock(), there is a race condition with
the release of sk_socket. All types of sockets(tcp/udp/unix/vsock)
will be affected.
The ref of psock become 0 after sock_map_close() executed.
'''
void sock_map_close()
{
...
if (likely(psock)) {
...
// !! here we remove psock and the ref of psock become 0
sock_map_remove_links(sk, psock)
psock = sk_psock_get(sk);
if (unlikely(!psock))
goto no_psock; <=== Control jumps here via goto
...
cancel_delayed_work_sync(&psock->work); <=== not executed
sk_psock_put(sk, psock);
...
}
'''
Based on the fact that we already wait for the workqueue to finish in
sock_map_close() if psock is held, we simply increase the psock
reference count to avoid race conditions.
With this patch, if the backlog thread is running, sock_map_close() will
wait for the backlog thread to complete and cancel all pending work.
If no backlog running, any pending work that hasn't started by then will
fail when invoked by sk_psock_get(), as the psock reference count have
been zeroed, and sk_psock_drop() will cancel all jobs via
cancel_delayed_work_sync().
In summary, we require synchronization to coordinate the backlog thread
and close() thread.
When setting up dirty page tracking at the vfio IOMMU backend for
device migration, if an error is encountered allocating a tracking
bitmap, the unwind loop fails to free previously allocated tracking
bitmaps. This occurs because the wrong loop index is used to
generate the tracking object. This results in unintended memory
usage for the life of the current DMA mappings where bitmaps were
successfully allocated.
Use the correct loop index to derive the tracking object for
freeing during unwind.
Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking") Signed-off-by: Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/r/20250521034647.2877-1-lirongqing@baidu.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
The active reference lifecycle provides the break/unbreak mechanism but
the active reference is not truly active after unbreak -- callers don't
use it afterwards but it's important for proper pairing of kn->active
counting. Assuming this mechanism is in place, the WARN check in
kernfs_should_drain_open_files() is too sensitive -- it may transiently
catch those (rightful) callers between
kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen
Ridong:
To avoid the false positives (mind panic_on_warn) remove the check altogether.
(This is meant as quick fix, I think active reference break/unbreak may be
simplified with larger rework.)
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled.
Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/88967.1743099372@localhost Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to ensure that the task packets of the accelerator
device are not lost during the migration process, it is necessary
to send an EQ and AEQ command to the device after the live migration
is completed and to update the completion position of the task queue.
Let the device recheck the completed tasks data and if there are
uncollected packets, device resend a task completion interrupt
to the software.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration") Signed-off-by: Longfang Liu <liulongfang@huawei.com> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20250510081155.55840-3-liulongfang@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.
Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.
In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration") Signed-off-by: Longfang Liu <liulongfang@huawei.com> Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20250510081155.55840-2-liulongfang@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because leaf progs do not store backchain. Fix by making all
progs do it. This is what GCC and Clang-generated code does as well.
Now the call trace looks like this:
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks.
Return value of the validate_nla() function can be propagated all the
way up to users of libbpf API. In case of error this libbpf version
of validate_nla returns -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
When we specify apply_bytes, we divide the msg into multiple segments,
each with a length of 'send', and every time we send this part of the data
using tcp_bpf_sendmsg_redir(), we use sk_msg_return_zero() to uncharge the
memory of the specified 'send' size.
However, if the first segment of data fails to send, for example, the
peer's buffer is full, we need to release all of the msg. When releasing
the msg, we haven't uncharged the memory of the subsequent segments.
This modification does not make significant logical changes, but only
fills in the missing uncharge places.
This issue has existed all along, until it was exposed after we added the
apply test in test_sockmap:
commit 3448ad23b34e ("selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Closes: https://lore.kernel.org/bpf/aAmIi0vlycHtbXeb@pop-os.localdomain/T/#t Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20250425060015.6968-2-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
According to trigger_data_alloc() doc, trigger_data_free() should be
used to free an event_trigger_data object. This fixes a mismatch introduced
when kzalloc was replaced with trigger_data_alloc without updating
the corresponding deallocation calls.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Link: https://lore.kernel.org/20250507145455.944453325@goodmis.org Link: https://lore.kernel.org/20250318112737.4174-1-linmq006@gmail.com Fixes: e1f187d09e11 ("tracing: Have existing event_command.parse() implementations use helpers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
[ SDR: Changed event_trigger_alloc/free() to trigger_data_alloc/free() ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org Fixes: 86599dbe2c527 ("tracing: Add helper functions to simplify event_command.parse() callback handling") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
