When writing to the multi_intensity file, don't unconditionally call
led_set_brightness. By only doing this if blinking is inactive we
prevent blinking from stopping if the blinking is in its off phase while
the file is written.
Instead, if blinking is active, the changed intensity values are applied
upon the next blink. This is consistent with changing the brightness on
monochrome LEDs with active blinking.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Tobias Deiminger <tobias.deiminger@linutronix.de> Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Link: https://lore.kernel.org/r/20250404184043.227116-1-sven@svenschwermer.de Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
&chan->lock is not supposed to protect 'chan->mbox'.
And in __mbox_bind_client, try_module_get is also not protected
by &chan->lock. So move module_put out of the lock protected
region.
Currently, when NFS is queried for all the labels present on the
file via a command example "getfattr -d -m . /mnt/testfile", it
does not return the security label. Yet when asked specifically for
the label (getfattr -n security.selinux) it will be returned.
Include the security label when all attributes are queried.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fattr4_numlinks is a recommended attribute, so the client should emulate
it even if the server doesn't support it. In decode_attr_nlink function
in nfs4xdr.c, nlink is initialized to 1. However, this default value
isn't set to the inode due to the check in nfs_fhget.
So if the server doesn't support numlinks, inode's nlink will be zero,
the mount will fail with error "Stale file handle". Set the nlink to 1
if the server doesn't support it.
Signed-off-by: Han Young <hanyang.tony@bytedance.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For TRANS2 QUERY_PATH_INFO request when the path does not exist, the
Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND
or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it
returns STATUS_DELETE_PENDING when the file is being deleted. And looks
like that any error response from TRANS2 QUERY_PATH_INFO does not have
SMBFLG_RESPONSE flag set.
So relax check in check_smb_hdr() for detecting if the packet is response
for this special case.
This change fixes stat() operation against Windows NT SMB servers and also
all operations which depends on -ENOENT result from stat like creat() or
mkdir().
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
strsep() modifies the address of the pointer passed to it so that it no
longer points to the original address. This means kfree() gets the wrong
pointer.
Fix this by passing unmodified pointer returned from kstrdup() to
kfree().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://lore.kernel.org/r/20250612163616.24298-1-v.shevtsov@mt-integration.ru Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
Fixes: 0a8ea52c3eb1 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem.
Fixes: c5ebcedb566e ("perf: Add ability to attach user stack dump to sample") Reported-by: Baisheng Gao <baisheng.gao@unisoc.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20250605110815.GQ39944@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Use "a" constraint for the shift operand of the __pcilg_mio_inuser() inline
assembly. The used "d" constraint allows the compiler to use any general
purpose register for the shift operand, including register zero.
If register zero is used this my result in incorrect code generation:
If register zero is selected to contain the shift value, the srlg
instruction ignores the contents of the register and always shifts zero
bits. Therefore use the "a" constraint which does not permit to select
register zero.
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Note: Fixed conflict due to unrelated comment change. ] Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Fixed conflict due to unrelated change in inet_proto_csum_replace_by_diff. ] Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we remount filesystem with 'abort' mount option while changing
other mount options as well (as is LTP test doing), we can return error
from the system call after commit d3476f3dad4a ("ext4: don't set
SB_RDONLY after filesystem errors") because the application of mount
option changes detects shutdown filesystem and refuses to do anything.
The behavior of application of other mount options in presence of
'abort' mount option is currently rather arbitary as some mount option
changes are handled before 'abort' and some after it.
Move aborting of the filesystem to the end of remount handling so all
requested changes are properly applied before the filesystem is shutdown
to have a reasonably consistent behavior.
Fixes: d3476f3dad4a ("ext4: don't set SB_RDONLY after filesystem errors") Reported-by: Jan Stancek <jstancek@redhat.com> Link: https://lore.kernel.org/all/Zvp6L+oFnfASaoHl@t14s Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Jan Stancek <jstancek@redhat.com> Link: https://patch.msgid.link/20241004221556.19222-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.
Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 76486b104168 ("ext4: avoid remount errors with 'abort' mount option") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below. To prevent this invalid access, it is necessary to
check the PMD migration entry and return early. In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio. Since the PMD migration entry is locked, it
cannot be served as the target.
Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."
BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.
Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/ Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/ Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Gavin Guo <gavinguo@igalia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Florent Revest <revest@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[gavin: backport the migration checking logic to __split_huge_pmd] Signed-off-by: Gavin Guo <gavinguo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access.
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless.
Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In our environment, it was found that the mitigation BHB has a great
impact on the benchmark performance. For example, in the lmbench test,
the "process fork && exit" test performance drops by 20%.
So it is necessary to have the ability to turn off the mitigation
individually through cmdline, thus avoiding having to compile the
kernel by adjusting the config.
Signed-off-by: Liu Song <liusong@linux.alibaba.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1661514050-22263-1-git-send-email-liusong@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
is_spectre_bhb_fw_affected() allows the caller to determine if the CPU
is known to need a firmware mitigation. CPUs are either on the list
of CPUs we know about, or firmware has been queried and reported that
the platform is affected - and mitigated by firmware.
This helper is not useful to determine if the platform is mitigated
by firmware. A CPU could be on the know list, but the firmware may
not be implemented. Its affected but not mitigated.
spectre_bhb_enable_mitigation() handles this distinction by checking
the firmware state before enabling the mitigation.
Add a helper to expose this state. This will be used by the BPF JIT
to determine if calling firmware for a mitigation is necessary and
supported.
Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is a preparation patch for eBPF atomic supports under arm64. eBPF
needs support atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and
atomic[64]_{xchg|cmpxchg}. The ordering semantics of eBPF atomics are
the same with the implementations in linux kernel.
Add three helpers to support LDCLR/LDEOR/LDSET/SWP, CAS and DMB
instructions. STADD/STCLR/STEOR/STSET are simply encoded as aliases for
LDADD/LDCLR/LDEOR/LDSET with XZR as the destination register, so no extra
helper is added. atomic_fetch_add() and other atomic ops needs support for
STLXR instruction, so extend enum aarch64_insn_ldst_type to do that.
LDADD/LDEOR/LDSET/SWP and CAS instructions are only available when LSE
atomics is enabled, so just return AARCH64_BREAK_FAULT directly in
these newly-added helpers if CONFIG_ARM64_LSE_ATOMICS is disabled.
If CONFIG_ARM64_LSE_ATOMICS is off, encoders for LSE-related instructions
can return AARCH64_BREAK_FAULT directly in insn.h. In order to access
AARCH64_BREAK_FAULT in insn.h, we can not include debug-monitors.h in
insn.h, because debug-monitors.h has already depends on insn.h, so just
move AARCH64_BREAK_FAULT into insn-def.h.
It will be used by the following patch to eliminate unnecessary LSE-related
encoders when CONFIG_ARM64_LSE_ATOMICS is off.
This commit is causing a suspend regression on Tegra186 Jetson TX2 with
Linux v6.12.y kernels. This is not seen with Linux v6.15 that includes
this change but indicates that there are there changes missing.
Therefore, revert this change.
The earlycon device clocks are enabled by the bootloader. However, the
pm_request_idle() call in __device_attach() disables the SCI port clocks
while earlycon is still active.
The earlycon write function, serial_console_write(), calls
sci_poll_put_char() via serial_console_putchar(). If the SCI port clocks
are disabled, writing to earlycon may sometimes cause the SR.TDFE bit to
remain unset indefinitely, causing the while loop in sci_poll_put_char()
to never exit. On single-core SoCs, this can result in the system being
blocked during boot when this issue occurs.
To resolve this, increment the runtime PM usage counter for the earlycon
SCI device before registering the UART port.
Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only
when necessary") MDIO reset deasserts were performed twice during boot.
Now that the second deassert is no longer performed, device probe
failures happen due to the change in timing with the following error
message:
SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5
Restore the original effective timing, which resolves the probe
failures.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds ethernet PHY reset GPIO config for Beaglebone Black
series boards with revision C3. This fixes a random phy startup failure
bug discussed at [1]. The GPIO pin used for reset is not used on older
revisions, so it is ok to apply to all board revisions. The reset timing
was discussed and tested at [2].
syzbot found its way in net/atm/lec.c, and found an error path
in lecd_attach() could leave a dangling pointer in dev_lec[].
Add a mutex to protect dev_lecp[] uses from lecd_attach(),
lec_vcc_attach() and lec_mcast_attach().
Following patch will use this mutex for /proc/net/atm/lec.
BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline]
BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating
a CALIPSO option. [0]
The NULL is of struct sock, which was fetched by sk_to_full_sk() in
calipso_req_setattr().
Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"),
reqsk->rsk_listener could be NULL when SYN Cookie is returned to its
client, as hinted by the leading SYN Cookie log.
Here are 3 options to fix the bug:
1) Return 0 in calipso_req_setattr()
2) Return an error in calipso_req_setattr()
3) Alaways set rsk_listener
1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie
for CALIPSO. 3) is also no go as there have been many efforts to reduce
atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35
("tcp/dccp: do not touch listener sk_refcnt under synflood").
As of the blamed commit, SYN Cookie already did not need refcounting,
and no one has stumbled on the bug for 9 years, so no CALIPSO user will
care about SYN Cookie.
Let's return an error in calipso_req_setattr() and calipso_req_delattr()
in the SYN Cookie case.
This can be reproduced by [1] on Fedora and now connect() of nc times out.
Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250617224125.17299-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
...there was buggy behavior where TCP connections without SACK support
could easily see erroneous undo events at the end of fast recovery or
RTO recovery episodes. The erroneous undo events could cause those
connections to suffer repeated loss recovery episodes and high
retransmit rates.
The problem was an interaction between the non-SACK behavior on these
connections and the undo logic. The problem is that, for non-SACK
connections at the end of a loss recovery episode, if snd_una ==
high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in
CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon
the next ACK the "tcp: fix to allow timestamp undo if no retransmits
were sent" logic saw the tp->retrans_stamp at 0 and erroneously
concluded that no data was retransmitted, and erroneously performed an
undo of the cwnd reduction, restoring cwnd immediately to the value it
had before loss recovery. This caused an immediate burst of traffic
and build-up of queues and likely another immediate loss recovery
episode.
This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp
values for non-SACK connections when snd_una is at or above high_seq,
because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in
this case, so it's not a valid signal that we can undo.
Note that the commit named in the Fixes footer restored long-present
behavior from roughly 2005-2019, so apparently this bug was present
for a while during that era, and this was simply not caught.
Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent") Reported-by: Eric Wheeler <netdev@lists.ewheeler.net> Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/ Signed-off-by: Neal Cardwell <ncardwell@google.com> Co-developed-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
vcc_sendmsg() copies data passed from userspace to skb and passes
it to vcc->dev->ops->send().
atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after
checking if skb->len is 0, but it's not enough.
Also, when skb->len == 0, skb and sk (vcc) were leaked because
dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing
to revert atm_account_tx() in vcc_sendmsg(), which is expected
to be done in atm_pop_raw().
Let's properly free skb with an invalid length in atmtcp_c_send().
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Christian Lamparter <chunkeey@gmail.com> Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ptp4l, and any other application which calls clock_adjtime() on a
physical clock, is greeted with error -EBUSY after commit 87f7ce260a3c
("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()").
Explanation for the breakage
----------------------------
The blamed commit was based on the false assumption that
ptp_vclock_in_use() callers already test for n_vclocks prior to calling
this function.
This is notably incorrect for the code path below, in which there is, in
fact, no n_vclocks test:
The result is that any clock adjustment on any physical clock is now
impossible. This is _despite_ there not being any vclock over this
physical clock.
$ ptp4l -i eno0 -2 -P -m
ptp4l[58.425]: selected /dev/ptp0 as PTP clock
[ 58.429749] ptp: physical clock is free running
ptp4l[58.431]: Failed to open /dev/ptp0: Device or resource busy
failed to create a clock
$ cat /sys/class/ptp/ptp0/n_vclocks
0
The patch makes the ptp_vclock_in_use() function say "if it's not a
virtual clock, then this physical clock does have virtual clocks on
top".
Then ptp_clock_freerun() uses this information to say "this physical
clock has virtual clocks on top, so it must stay free-running".
Then ptp_clock_adjtime() uses this information to say "well, if this
physical clock has to be free-running, I can't do it, return -EBUSY".
Simply put, ptp_vclock_in_use() cannot be simplified so as to remove the
test whether vclocks are in use.
What did the blamed commit intend to fix
----------------------------------------
The blamed commit presents a lockdep warning stating "possible recursive
locking detected", with the n_vclocks_store() and ptp_clock_unregister()
functions involved.
The issue can be triggered by creating and then deleting vclocks:
$ echo 2 > /sys/class/ptp/ptp0/n_vclocks
$ echo 0 > /sys/class/ptp/ptp0/n_vclocks
But note that in the original stack trace, the address of the first lock
is different from the address of the second lock. This is because at
step 1 marked above, &ptp->n_vclocks_mux is the lock of the parent
(physical) PTP clock, and at step 2, the lock is of the child (virtual)
PTP clock. They are different locks of different devices.
In this situation there is no real deadlock, the lockdep warning is
caused by the fact that the mutexes have the same lock class on both the
parent and the child. Functionally it is fine.
Proposed alternative solution
-----------------------------
We must reintroduce the body of ptp_vclock_in_use() mostly as it was
structured prior to the blamed commit, but avoid the lockdep warning.
Based on the fact that vclocks cannot be nested on top of one another
(ptp_is_attribute_visible() hides n_vclocks for virtual clocks), we
already know that ptp->n_vclocks is zero for a virtual clock. And
ptp->is_virtual_clock is a runtime invariant, established at
ptp_clock_register() time and never changed. There is no need to
serialize on any mutex in order to read ptp->is_virtual_clock, and we
take advantage of that by moving it outside the lock.
Thus, virtual clocks do not need to acquire &ptp->n_vclocks_mux at
all, and step 2 in the code walkthrough above can simply go away.
We can simply return false to the question "ptp_vclock_in_use(a virtual
clock)".
Other notes
-----------
Releasing &ptp->n_vclocks_mux before ptp_vclock_in_use() returns
execution seems racy, because the returned value can become stale as
soon as the function returns and before the return value is used (i.e.
n_vclocks_store() can run any time). The locking requirement should
somehow be transferred to the caller, to ensure a longer life time for
the returned value, but this seems out of scope for this severe bug fix.
Because we are also fixing up the logic from the original commit, there
is another Fixes: tag for that.
Fixes: 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()") Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250613174749.406826-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes an issue seen in a large-scale deployment under heavy
incoming pkts where the aRFS flow wrongly matches a flow and reprograms the
NIC with wrong settings. That mis-steering causes RX-path latency spikes
and noisy neighbor effects when many connections collide on the same
hash (some of our production servers have 20-30K connections).
set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by
hashing the skb sized by the per rx-queue table size. This results in
multiple connections (even across different rx-queues) getting the same
hash value. The driver steer function modifies the wrong flow to use this
rx-queue, e.g.: Flow#1 is first added:
Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10
Later when a new flow needs to be added:
Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20
The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This
results in both flows getting un-optimized - packets for Flow#1 goes to
q#20, and then reprogrammed back to q#10 later and so on; and Flow #2
programming is never done as Flow#1 is matched first for all misses. Many
flows may wrongly share the same hash and reprogram rules of the original
flow each with their own q#.
Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf
clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s
72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS,
enable aRFS (global value is 144 * rps_flow_cnt).
Test notes about results from ice_rx_flow_steer():
---------------------------------------------------
1. "Skip:" counter increments here:
if (fltr_info->q_index == rxq_idx ||
arfs_entry->fltr_state != ICE_ARFS_ACTIVE)
goto out;
2. "Add:" counter increments here:
ret = arfs_entry->fltr_info.fltr_id;
INIT_HLIST_NODE(&arfs_entry->list_entry);
3. "Update:" counter increments here:
/* update the queue to forward to on an already existing flow */
Runtime comparison: original code vs with the patch for different
rps_flow_cnt values.
+-------------------------------+--------------+--------------+
| rps_flow_cnt | 512 | 2048 |
+-------------------------------+--------------+--------------+
| Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K |
| Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K |
| CPU User | 216 vs 183 | 216 vs 206 |
| CPU System | 1441 vs 1171 | 1447 vs 1320 |
| CPU Softirq | 1245 vs 920 | 1238 vs 961 |
| CPU Total | 29 vs 22.7 | 29 vs 24.9 |
| aRFS Update | 533K vs 59 | 521K vs 32 |
| aRFS Skip | 82M vs 77M | 7.2M vs 4.5M |
+-------------------------------+--------------+--------------+
A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections
showed no performance degradation.
Some points on the patch/aRFS behavior:
1. Enabling full tuple matching ensures flows are always correctly matched,
even with smaller hash sizes.
2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs
and fewer calls to driver for programming on misses.
3. Larger hash tables reduces mis-steering due to more unique flow hashes,
but still has clashes. However, with larger per-device rps_flow_cnt, old
flows take more time to expire and new aRFS flows cannot be added if h/w
limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt
pkts have been processed by this cpu that are not part of the flow).
Fixes: 28bf26724fdb0 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <krikku@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An aoe device's rq_list contains accepted block requests that are
waiting to be transmitted to the aoe target. This queue was added as
part of the conversion to blk_mq. However, the queue was not cleaned out
when an aoe device is downed which caused blk_mq_freeze_queue() to sleep
indefinitely waiting for those requests to complete, causing a hang. This
fix cleans out the queue before calling blk_mq_freeze_queue().
Passing a pointer to an unaligned integer as a function argument is
undefined behavior:
drivers/hwmon/occ/common.c:492:27: warning: taking address of packed member 'accumulator' of class or structure 'power_sensor_2' may result in an unaligned pointer value [-Waddress-of-packed-member]
492 | val = occ_get_powr_avg(&power->accumulator,
| ^~~~~~~~~~~~~~~~~~
drivers/hwmon/occ/common.c:493:13: warning: taking address of packed member 'update_tag' of class or structure 'power_sensor_2' may result in an unaligned pointer value [-Waddress-of-packed-member]
493 | &power->update_tag);
| ^~~~~~~~~~~~~~~~~
Move the get_unaligned() calls out of the function and pass these
through argument registers instead.
clang produces an output with excessive stack usage when building the
occ_setup_sensor_attrs() function, apparently the result of having
a lot of struct literals and building with the -fno-strict-overflow
option that leads clang to skip some optimization in case the 'attr'
pointer overruns:
The nouveau_get_backlight_name() function generates a unique name for the
backlight interface, appending an id from 1 to 99 for all backlight devices
after the first.
GCC 15 (and likely other compilers) produce the following
-Wformat-truncation warning:
nouveau_backlight.c: In function ‘nouveau_backlight_init’:
nouveau_backlight.c:56:69: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Werror=format-truncation=]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~
In function ‘nouveau_get_backlight_name’,
inlined from ‘nouveau_backlight_init’ at nouveau_backlight.c:351:7:
nouveau_backlight.c:56:56: note: directive argument in the range [1, 2147483647]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~
nouveau_backlight.c:56:17: note: ‘snprintf’ output between 14 and 23 bytes into a destination of size 15
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The warning started appearing after commit ab244be47a8f ("drm/nouveau:
Fix a potential theorical leak in nouveau_get_backlight_name()") This fix
for the ida usage removed the explicit value check for ids larger than 99.
The compiler is unable to intuit that the ida_alloc_max() limits the
returned value range between 0 and 99.
Because the compiler can no longer infer that the number ranges from 0 to
99, it thinks that it could use as many as 11 digits (10 + the potential -
sign for negative numbers).
The warning has gone unfixed for some time, with at least one kernel test
robot report. The code breaks W=1 builds, which is especially frustrating
with the introduction of CONFIG_WERROR.
The string is stored temporarily on the stack and then copied into the
device name. Its not a big deal to use 11 more bytes of stack rounding out
to an even 24 bytes. Increase BL_NAME_SIZE to 24 to avoid the truncation
warning. This fixes the W=1 builds that include this driver.
Compile tested only.
Fixes: ab244be47a8f ("drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312050324.0kv4PnfZ-lkp@intel.com/ Suggested-by: Timur Tabi <ttabi@nvidia.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20250610-jk-nouveua-drm-bl-snprintf-fix-v2-1-7fdd4b84b48e@intel.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver unconditionally saves current state on first init in
dsi_pll_10nm_init(), but does not save the VCO rate, only some of the
divider registers. The state is then restored during probe/enable via
msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
dsi_10nm_pll_restore_state().
Restoring calls dsi_pll_10nm_vco_set_rate() with
pll_10nm->vco_current_rate=0, which basically overwrites existing rate of
VCO and messes with clock hierarchy, by setting frequency to 0 to clock
tree. This makes anyway little sense - VCO rate was not saved, so
should not be restored.
If PLL was not configured configure it to minimum rate to avoid glitches
and configuring entire in clock hierarchy to 0 Hz.
huge_pmd_unshare() drops a reference on a page table that may have
previously been shared across processes, potentially turning it into a
normal page table used in another process in which unrelated VMAs can
afterwards be installed.
If this happens in the middle of a concurrent gup_fast(), gup_fast() could
end up walking the page tables of another process. While I don't see any
way in which that immediately leads to kernel memory corruption, it is
really weird and unexpected.
Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),
just like we do in khugepaged when removing page tables for a THP
collapse.
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-2-1329349bad1a@google.com Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-2-f4136f5ec58a@google.com Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000000000000000000000000000000000000000000000000000
raw: 0000000000000066000000000000000000000000f20000000000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count.
Link: https://lkml.kernel.org/r/20241216071147.3984217-1-liushixin2@huawei.com Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[backport note: struct ptdesc did not exist yet, stuff it equivalently
into struct page instead] Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2] Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs] Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[stable backport: code got moved around, VMA splitting is in
__vma_adjust, hugetlb lock wasn't used back then] Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like many Dell laptops, the 3.5mm port by default can not detect a
combined headphones+mic headset or even a pure microphone. This
change enables the port's functionality.
Signed-off-by: Jonathan Lane <jon@borg.moe> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250611193124.26141-2-jon@borg.moe Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Luis reported, losetup currently doesn't properly create the loop
device without this if the device node already exists because old
scripts created it manually. So default to y for now and remove the
aggressive removal schedule.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
We should count the terminating NUL byte as part of the ctx_len.
Otherwise, UBSAN logs a warning:
UBSAN: array-index-out-of-bounds in security/selinux/xfrm.c:99:14
index 60 is out of range for type 'char [*]'
The allocation itself is correct so there is no actual out of bounds
indexing, just a warning.
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access") CC: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the usability of the unit_add sysfs attribute by ensuring that
the associated FCP LUN scan processing is completed synchronously. This
enables configuration tooling to consistently determine the end of the
scan process to allow for serialization of follow-on actions.
While the scan process associated with unit_add typically completes
synchronously, it is deferred to an asynchronous background process if
unit_add is used before initial remote port scanning has completed. This
occurs when unit_add is used immediately after setting the associated FCP
device online.
To ensure synchronous unit_add processing, wait for remote port scanning
to complete before initiating the FCP LUN scan.
Cc: stable@vger.kernel.org Reviewed-by: M Nikhil <nikh1092@linux.ibm.com> Reviewed-by: Nihar Panda <niharp@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Nihar Panda <niharp@linux.ibm.com> Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and
5s and 10s are used elsewhere. It turns out that rarely the 5s is not
enough on Azure, so let's use storvsc_timeout everywhere.
In case a timeout happens and storvsc_channel_init() returns an error,
close the VMBus channel so that any host-to-guest messages in the
channel's ringbuffer, which might come late, can be safely ignored.
Add a "const" to storvsc_timeout.
Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault
injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't
check return value of jffs2_prealloc_raw_node_refs and simply lets any
error propagate into jffs2_sum_write_data, which eventually calls
jffs2_link_node_ref in order to link the summary to an expectedly allocated
node.
cm_chan_msg_send() checks that userspace didn't send too much data but
riocm_ch_send() failed to check that userspace sent sufficient data. The
result is that riocm_ch_send() can write to fields in the rio_ch_chan_hdr
which were outside the bounds of the space which cm_chan_msg_send()
allocated.
Address this by teaching riocm_ch_send() to check that the entire
rio_ch_chan_hdr was copied in from userspace.
commit 7adb96687ce8 ("x86/bugs: Make spectre user default depend on
MITIGATION_SPECTRE_V2") depends on commit 72c70f480a70 ("x86/bugs: Add
a separate config for Spectre V2"), which introduced
MITIGATION_SPECTRE_V2.
commit 72c70f480a70 ("x86/bugs: Add a separate config for Spectre V2")
never landed in stable tree, thus, stable tree doesn't have
MITIGATION_SPECTRE_V2, that said, commit 7adb96687ce8 ("x86/bugs: Make
spectre user default depend on MITIGATION_SPECTRE_V2") has no value if
the dependecy was not applied.
Revert commit 7adb96687ce8 ("x86/bugs: Make spectre user default
depend on MITIGATION_SPECTRE_V2") in stable kernel which landed in in
5.4.294, 5.10.238, 5.15.185, 6.1.141 and 6.6.93 stable versions.
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pass the correct list head to list_for_each_entry*() when looping through
the packet list.
Without this patch, reading the packet data via sysfs will show the data
incorrectly (because it starts at the wrong packet), and clearing the
packet list will result in a NULL pointer dereference.
Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It breaks target-module@2b300050 ("ti,sysc-omap2") probe on AM62x in a case
when minimally-configured system tries to network-boot:
[ 6.888776] probe of 2b300050.target-module returned 517 after 258 usecs
[ 17.129637] probe of 2b300050.target-module returned 517 after 708 usecs
[ 17.137397] platform 2b300050.target-module: deferred probe pending: (reason unknown)
[ 26.878471] Waiting up to 100 more seconds for network.
There are minimal configurations possible when the deferred device is not
being probed any more (because everything else has been successfully
probed) and deferral lists are not processed any more.
Stable mmc enumeration can be achieved by filling /aliases node properly
(4700a00755fb commit's rationale).
The current code around TEE_IOCTL_PARAM_SIZE() is a bit wrong on
32-bit kernels: Multiplying a user-provided 32-bit value with the
size of a structure can wrap around on such platforms.
Fix it by using saturating arithmetic for the size calculation.
This has no security consequences because, in all users of
TEE_IOCTL_PARAM_SIZE(), the subsequent kcalloc() implicitly checks
for wrapping.
Don't put the l4ls clk domain to sleep in case of standby.
Since CM3 PM FW[1](ti-v4.1.y) doesn't wake-up/enable the l4ls clk domain
upon wake-up, CM3 PM FW fails to wake-up the MPU.
In case the MC firmware runs in debug mode with extensive prints pushed
to the console, the current timeout of 500ms is not enough.
Increase the timeout value so that we don't have any chance of wrongly
assuming that the firmware is not responding when it's just taking more
time.
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
We call skb_bpf_redirect_clear() to clean _sk_redir before handling skb in
backlog, but when sk_psock_handle_skb() return EAGAIN due to sk_rcvbuf
limit, the redirect info in _sk_redir is not recovered.
Fix skb redir loss during EAGAIN retries by restoring _sk_redir
information using skb_bpf_set_redir().
Before this patch:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
Setting up benchmark 'sockmap'...
create socket fd c1:13 p1:14 c2:15 p2:16
Benchmark 'sockmap' started.
Send Speed 1343.172 MB/s, BPF Speed 1343.238 MB/s, Rcv Speed 65.271 MB/s
Send Speed 1352.022 MB/s, BPF Speed 1352.088 MB/s, Rcv Speed 0 MB/s
Send Speed 1354.105 MB/s, BPF Speed 1354.105 MB/s, Rcv Speed 0 MB/s
Send Speed 1355.018 MB/s, BPF Speed 1354.887 MB/s, Rcv Speed 0 MB/s
'''
Due to the high send rate, the RX processing path may frequently hit the
sk_rcvbuf limit. Once triggered, incorrect _sk_redir will cause the flow
to mistakenly enter the "!ingress" path, leading to send failures.
(The Rcv speed depends on tcp_rmem).
The strlcat() with FORTIFY support is triggering a panic because it
thinks the target buffer will overflow although the correct target
buffer size is passed in.
Anyway, instead of memset() with 0 followed by a strlcat(), just use
memcpy() and ensure that the resulting buffer is NULL terminated.
BIOSVersion is only used for the lpfc_printf_log() which expects a
properly terminated string.
At startup, the driver just assumes that all registers have their
default values. But after a soft reset, the chip will just be in the
state it was, and some pins may have been configured as outputs. Any
modification of the output register will cause these pins to be driven
low, which leads to unexpected/unwanted effects. To prevent this from
happening, set the chip's IO configuration register to a known safe
mode (all inputs) before toggling any other bits.
software_node_get_reference_args() wants to get @index-th element, so
the property value requires at least '(index + 1) * sizeof(*ref)' bytes
but that can not be guaranteed by current OOB check, and may cause OOB
for malformed property.
Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.
FDB entries are allocated in an atomic context as they can be added from
the data path when learning is enabled.
After converting the FDB hash table to rhashtable, the insertion rate
will be much higher (*) which will entail a much higher rate of per-CPU
allocations via dst_cache_init().
When adding a large number of entries (e.g., 256k) in a batch, a small
percentage (< 0.02%) of these per-CPU allocations will fail [1]. This
does not happen with the current code since the insertion rate is low
enough to give the per-CPU allocator a chance to asynchronously create
new chunks of per-CPU memory.
Given that:
a. Only a small percentage of these per-CPU allocations fail.
b. The scenario where this happens might not be the most realistic one.
c. The driver can work correctly without dst caches. The dst_cache_*()
APIs first check that the dst cache was properly initialized.
d. The dst caches are not always used (e.g., 'tos inherit').
It seems reasonable to not treat these allocation failures as fatal.
Therefore, do not bail when dst_cache_init() fails and suppress warnings
by specifying '__GFP_NOWARN'.
[1] percpu: allocation failed, size=40 align=8 atomic=1, atomic alloc failed, no space left
(*) 97% reduction in average latency of vxlan_fdb_update() when adding
256k entries in a batch.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250415121143.345227-14-idosch@nvidia.com Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a bridge port STP state is changed from BLOCKING/DISABLED to
FORWARDING, the port's igmp query timer will NOT re-arm itself if the
bridge has been configured as per-VLAN multicast snooping.
Solve this by choosing the correct multicast context(s) to enable/disable
port multicast based on whether per-VLAN multicast snooping is enabled or
not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast
snooping by re-implementing br_multicast_enable_port() and
br_multicast_disable_port() functions.
Before the patch, the IGMP query does not happen in the last step of the
following test sequence, i.e. no growth for tx counter:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# bridge link set dev swp1 state 0
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge link set dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
After the patch, the IGMP query happens in the last step of the test:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# bridge link set dev swp1 state 0
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge link set dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
3
Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In lpfc_check_sli_ndlp(), the get_job_els_rsp64_did remote_id assignment
does not apply for GEN_REQUEST64 commands as it only has meaning for a
ELS_REQUEST64 command. So, if (iocb->ndlp == ndlp) is false, we could
erroneously return the wrong value. Fix by replacing the fallthrough
statement with a break statement before the remote_id check.
issues were observed in deduplication between modules and kernel BTF
such that a large number of kernel types were not deduplicated so
were found in module BTF (task_struct, bpf_prog etc). The root cause
appeared to be a failure to dedup struct types, specifically those
with members that were pointers with __percpu annotations.
The issue in dedup is at the point that we are deduplicating structures,
we have not yet deduplicated reference types like pointers. If multiple
copies of a pointer point at the same (deduplicated) integer as in this
case, we do not see them as identical. Special handling already exists
to deal with structures and arrays, so add pointer handling here too.
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
projects / thirdparty / kernel / stable.git / log
