cdr_pgsql cel_pgsql res_config_pgsql: compatibility with PostgreSQL 12
PostgreSQL 12 finally removed column adsrc from table pg_catalog.pg_attrdef
(column default values), which has been deprecated since version 8.0.
Since then, the official/correct/supported way to retrieve the column
default value from the catalog is function pg_catalog.pg_get_expr().
This change breaks compatibility with pre-8.0 PostgreSQL servers,
but has reached end-of-support more than a decade ago.
cdr_pgsql and res_config_pgsql still have support for pre-7.3
servers, but cleaning that up is perhaps a topic for a major release,
not this bugfix.
George Joseph [Wed, 9 Oct 2019 14:32:45 +0000 (08:32 -0600)]
pjproject_bundled: Replace earlier reverts with official fixes.
Issues in pjproject 2.9 caused us to revert some of their changes
as a work around. This introduced another issue where pjproject
wouldn't build with older gcc versions such as that found on
CentOS 6. This commit replaces the reverts with the official
fixes for the original issues and allows pjproject to be built
on CentOS 6 again.
Kevin Harwell [Wed, 9 Oct 2019 20:17:59 +0000 (15:17 -0500)]
pbx: deadlock when outgoing dialed channel hangs up too quickly
Here's the basic scenario that occurred when executing an AMI fast originate
while at the same time something else locks the channels container, and also
wants a lock on the dialed channel:
1. pbx_outgoing_attempt obtains a lock on a dialed channel
2. concurrently another thread obtains a lock on the channels container, and
subsequently requests a lock on the dialed channel. It waits on #1. For
instance, "core show channel <dialed channel"
3. the outgoing call does not fail, but ends before the pbx_outgoing_attempt
function exits
4. pbx_outgoing_attempt function exits, the outgoing structure destructs, and
attempts to hang up the dialed channel
5. hang up tries to obtain the channels container lock, but can't due to #2.
6. Asterisk is deadlocked.
The solution was to allow the pbx_outgoing_exec function to "steal" ownership
of the dialed channel, and handle hanging it up. The channel now is either hung
up prior to it being potentially locked by the initiating thread, or if locked
the hang up takes place in a different thread, thus alleviating the deadlock.
ASTERISK-28561
patches:
iliketrains.diff submitted by Joshua Colp (license 5000)
Reason for revert: Problematic for users who store their voicemail
on network storage devices, or share voicemail storage between
multiple Asterisk instances.
Kevin Harwell [Wed, 2 Oct 2019 17:18:50 +0000 (12:18 -0500)]
res_pjsip_mwi: use an ao2_global object for mwi containers
On shutdown it's possible for the unsolicited mwi container to be freed before
other dependent threads are done using it. This patch ensures this can no
longer happen by wrapping the container in an ao2_global object. The solicited
container was also changed too.
Kevin Harwell [Wed, 2 Oct 2019 17:17:43 +0000 (12:17 -0500)]
serializer: move/add asterisk serializer pool functionality
Serializer pools have previously existed in Asterisk. However, for the most
part the code has been duplicated across modules. This patch abstracts the
code into an 'ast_serializer_pool' object. As well the code is now centralized
in serializer.c/h.
In addition serializer pools can now optionally be monitored by a shutdown
group. This will prevent the pool from being destroyed until all serializers
have completed.
Kevin Harwell [Wed, 2 Oct 2019 17:18:09 +0000 (12:18 -0500)]
res_pjsip/res_pjsip_mwi: use centralized serializer pools
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
This improves the way which stasis_state reference counting works.
Since manager->states holds onto the proxy object instead of the real
object this allows stasis_state objects to be freed when appropriate
without use of a special state_remove function. Additionally each
distinct eid associated with the state holds a reference to the state to
prevent early release and potentially allow easier debug of leaks.
There are some warning messages which are not informative without endpoint:
"No registered subscribe handler for event presence.winfo"
"No registered publish handler for event presence"
This patch adds an endpoint name to these messages.
Sean Bright [Wed, 25 Sep 2019 16:01:33 +0000 (12:01 -0400)]
pbx: Prevent Realtime switch crash on invalid priority
pbx_extension_helper takes two 'context' arguments. One (con) is a
pointer directly to a 'struct ast_context' and the other (context) is
the name of the context. In all cases, one of these arguments is NULL
and the other is non-NULL.
Functions that are ultimately called by pbx_extension_helper expect that
'context' will be non-NULL, so we set it unconditionally on entry into
this function.
Ben Ford [Tue, 24 Sep 2019 20:44:14 +0000 (15:44 -0500)]
taskprocessor.c: Added "like" support to 'core show taskprocessors'
Added "like" support for 'core show taskprocessors'. Now you
can specify a specific set of taskprocessors (or just one) by
adding the keyword "like" to the above command, followed by
your search criteria.
Sean Bright [Wed, 18 Sep 2019 11:56:05 +0000 (07:56 -0400)]
res_musiconhold: Add new 'playlist' mode
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Kevin Harwell [Tue, 24 Sep 2019 16:21:12 +0000 (11:21 -0500)]
res_pjsip_pubsub: change warning to debug
The following message:
"Subscription request from endpoint <blah> rejected. Expiration of 0 is invalid"
Would sometimes spam the log with warnings if Asterisk restarted and a bunch
of clients sent unsubscribes. This patch changes it from a warning to a debug
message.
astobj2.c declares DEBUG_THREADS_LOOSE_ABI to avoid overhead of debug
threads tracking information in the internal structures of astobj2.
Unfortunately this means that ao2_global_obj contains the statically
allocated debug threads tracking fields which are used by initialization
and cleanup but main/astobj2.c believed those fields and associated
space did not exist.
Ben Ford [Tue, 24 Sep 2019 14:40:35 +0000 (09:40 -0500)]
taskprocessor.c: Add CLI commands to reset taskprocessor stats.
Added two new CLI commands to reset stats for taskprocessors. You can
reset stats for a single, specific taskprocessor ('core reset
taskprocessor <taskprocessor>'), or you can reset all taskprocessors
('core reset taskprocessors'). These commands will reset the counter for
the number of tasks processed as well as the max queue size.
We've found a connection re-use regression in pjproject 2.9
introduced by commit
"Close #1019: Support for multiple listeners."
https://trac.pjsip.org/repos/changeset/6002
https://trac.pjsip.org/repos/ticket/1019
Normally, multiple SSL requests should reuse the same connection
if one already exists to the remote server. When a transport
error occurs, the next request should establish a new connection
and any following requests should use that same one. With this
patch, when a transport error occurs, every new request creates
a new connection so you can wind up with thousands of open tcp
sockets, possibly exhausting file handles, and increasing memory
usage.
Reverting pjproject commit 6002 (and related 6021) restores the
expected behavior.
We also found a memory leak in SSL processing that was introduced by
commit
"Fixed #2204: Add OpenSSL remote certificate chain info"
https://trac.pjsip.org/repos/changeset/6014
https://trac.pjsip.org/repos/ticket/2204
Apparently the remote certificate chain is continually recreated
causing the leak.
Reverting pjproject commit 6014 (and related 6022) restores the
expected behavior.
Both of these issues have been acknowledged by Teluu.
Previous to this patch passing a NULL tag to ao2_alloc or ao2_ref based
functions would result in the reference not being logged under
REF_DEBUG. This could sometimes cause inaccurate logging if NULL was
accidentally passed to a reference action. Now reference logging is
only disabled by option passed to the allocation method.
Kevin Harwell [Mon, 23 Sep 2019 16:01:36 +0000 (11:01 -0500)]
res_sorcery_memory_cache: stale item update leak
When a stale item was being updated the object was being retrieved, but its
reference was not being decremented after the update. This patch makes it so
the object is now appropriately de-referenced.
George Joseph [Mon, 23 Sep 2019 12:09:29 +0000 (06:09 -0600)]
astmm.c: Display backtrace with memory show allocations
You can currently capture backtraces of memory allocations but they
only get displayed when you stop asterisk and the atexit hooks
are enabled. Now, if memory backtrace is on and you issue a
"memory show allocations" CLI command for a specific file, then
a backtrace will show for each allocation that occurred after
you turned "memory backtrace on". The backtrace display is shown
only when a specific file's allocations are displayed to prevent
a massive CLI dump of every file's allocations.
stasis: refcounter.py can incorrectly report skewed objects.
It is possible for topic->name to be NULL, this causes the allocation
reference to not be logged. Use the name variable instead which has
been verified to be a non-empty.
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
chan_pjsip: Relock correct channel during "fax" redirect.
When fax detection occurs on an outbound PJSIP channel the
redirect operation will result in a masquerade occurring and
the underlying channel on the session changing. The code
incorrectly relocked the new channel instead of the old
channel when returning. This resulted in the new channel
being locked indefinitely. The code now always acts on the
expected channel.
On FreeBSD using the clang/llvm compiler build fails to build due
to the switch statement argument being a non integer type expression.
Switch to an if/else if/else construct to sidestep the issue.
Ben Ford [Tue, 3 Sep 2019 17:20:20 +0000 (12:20 -0500)]
res_rtp_asterisk.c: Send RTCP as compound packets.
According to RFC3550, ALL RTCP packets must be sent in a compond packet
of at least two individual packets, including SR/RR and SDES. REMB,
FIR, and NACK were not following this format, and as a result, would
fail the packet check in ast_rtcp_interpret. This was found from writing
unit tests for RTCP. The browser would accept the way we were
constructing these RTCP packets, but when sending directly from one
Asterisk instance to another, the above mentioned problem would occur.
Sean Bright [Wed, 11 Sep 2019 20:58:29 +0000 (16:58 -0400)]
channels: Allow updating variable value
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
sungtae kim [Tue, 27 Aug 2019 22:44:33 +0000 (00:44 +0200)]
res_musiconhold: Added unregister realtime moh class
This fix allows a realtime moh class to be unregistered from the command
line. This is useful when the contents of a directory referenced by a
realtime moh class have changed.
The realtime moh class is then reloaded on the next request and uses the
new directory contents.
Ben Ford [Wed, 28 Aug 2019 19:25:57 +0000 (14:25 -0500)]
res_rtp: Add unit tests for RTCP stats.
Added unit tests for RTCP video stats. These tests include NACK, REMB,
FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
tests are currently disabled due to a bug. We expect to receive a
compound packet, but the code sends this out as a single packet, which
the browser accepts, but makes Asterisk upset.
While writing these tests, I noticed an issue with NACK as well. Where
it is handling a received NACK request, it was reading in only the first
8 bits of following packets that were also lost. This has been changed
to the correct value of 16 bits.
Also made a minor fix to the data buffer unit test.
ChanIsAvail() generates a CDR when unanswered=yes in cdr.conf.
ChanIsAvail() creates a temporary channel with ast_request() to test
resource availability. It should not generate a CDR when it hangs up
this temporary channel.
This patch disables CDR generation for the temporary channel with
ast_cdr_set_property().
chan_dahdi: set CHANNEL(hangupsource) when a PRI channel hangs up
When the remote ISDN party ends an ISDN call on a PRI link
(DISCONNECT), CHANNEL(hangupsource) information is not available.
chan_dahdi already contains an ast_set_hangupsource() in
__dahdi_exception() function but it seems that ISDN message processing
does not use this part of code.
Two other channel modules associate ast_queue_hangup() and
ast_set_hangupsource() functions calls:
- chan_pjsip in chan_pjsip_session_end() function,
- chan_sip in sip_queue_hangup_cause() function.
chan_iax2 separates them, in iax2_queue_hangup()/iax2_destroy() and
set_hangup_source_and_cause().
Thus, I propose to add ast_set_hangupsource() beside
ast_queue_hangup() in sig_pri_queue_hangup(), like chan_pjsip and
chan_sip already do.
George Joseph [Mon, 5 Aug 2019 11:59:59 +0000 (05:59 -0600)]
ARI: External Media
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Joshua Colp [Mon, 26 Aug 2019 12:53:27 +0000 (09:53 -0300)]
AST-2019-005 - translate: Don't assume all frames will have a src.
This change removes the assumption that a frame will always have
a src set on it. This assumption is incorrect.
Given a scenario where an RTP packet is received with no payload
the resulting audio frame will have no samples. If this frame goes
through a signed linear translation path an interpolated frame can
be created (if generic packet loss concealment is enabled) that has
minimal data on it, including no src. If this frame is given to a
translation path a crash will occur due to the lack of src.
Kevin Harwell [Tue, 20 Aug 2019 20:05:45 +0000 (15:05 -0500)]
AST-2019-004 - res_pjsip_t38.c: Add NULL checks before using session media
After receiving a 200 OK with a declined stream in response to a T.38
initiated re-invite Asterisk would crash when attempting to dereference
a NULL session media object.
This patch checks to make sure the session media object is not NULL before
attempting to use it.
ASTERISK-28495
patches:
ast-2019-004.patch submitted by Alexei Gradinari (license 5691)
test_utils.c: Skip test adsi_loaded_test if module not loaded.
Module res_adsi.so is deprecated, therefore it does not load by default.
Module not loaded causes it to yield a FAIL when tested by tests/test_utils.c.
This fix checks if the corresponding module is loaded at the start of the test,
and if not, it passes the test and exits with a message.
This fix is applied to all versions where the module is marked deprecated.
chan_unistim: Fix clang warning: variable sized type not at end of a struct
On reading information about initial client packet unistim use dirty
implementation of destination ip address retrieval. This fix uses
CMSG_*(..) to get ip address and make clang compile without warning.
ASTERISK-25592 #close Reported-by: Alexander Traud
Change-Id: Ic1fd34c2c2bcc951da65bf62e3f7a8adff8351b1
Kevin Harwell [Fri, 23 Aug 2019 22:03:07 +0000 (17:03 -0500)]
res_pjsip_mwi: add better handling of solicited vs unsolicited subscriptions
res_pjsip_mwi allows both solicited and unsolicited MWI subscription types.
While both can be set in the configuration for a given endpoint/aor, only
one is allowed. Precedence is given to unsolicited. Meaning if an endpoint/aor
is configured to allow both types then the solicited subscription is rejected
when it comes in. However, there is a configuration option to override that
behavior:
mwi_subscribe_replaces_unsolicited
When set to "yes" then when a solicited subscription comes in instead of
rejecting it Asterisk is suppose to replace the unsolicited one if it exists.
Prior to this patch there was a bug in Asterisk that allowed the solicted one
to be added, but did not remove the unsolicited. As a matter of fact a new
unsolicited subscription got added everytime a SIP register was received.
Over time this eventually could "flood" a phone with SIP notifies.
This patch fixes that behavior to now make it work as expected. If configured
to do so a solicited subscription now properly replaces the unsolicited one.
As well when an unsubscribe is received the unsolicited subscription is
restored. Logic was also put in to handle reloads, and any configuration changes
that might result from that. For instance, if a solicited subscription had
previously replaced an unsolicited one, but after reload it was configured to
not allow that then the solicited one needs to be shutdown, and the unsolicited
one added.
chan_unistim: Fix code, causing all incoming DTMF sent back to asterisk
Current implementation of ast_channel_tech send_digit_begin hook uses
same function for tone playback as key press handler. This cause every
incoming dtmf send back to asterisk. In case of two unistim phones
connected to each other, it'll cause indefinite DTMF loop. Fix add
separate function for dtmf tone phone play.
chan_unistim: Fix RTP port byte order for big-endian arch
This patch fixes one-way oudio that users expirienced on
big-endian architechtires. RTP port number bytes was stored
in improper order and phone sent RTP to wrong RTP port.
George Joseph [Wed, 21 Aug 2019 18:29:57 +0000 (12:29 -0600)]
chan_rtp: Accept hostname as well as ip address as destination
The UnicastRTP channel driver provided by chan_rtp now accepts
"<hostname>:<port>" as an alternative to "<ip_address>:<port>"
in the destination. The first AAAA (preferred) or A record resolved
will be used as the destination. The lookup is synchronous so beware
of possible dialplan delays if you specify a hostname.
George Joseph [Wed, 21 Aug 2019 17:03:26 +0000 (11:03 -0600)]
dns_core: Create new API ast_dns_resolve_ipv6_and_ipv4
The new function takes in a pointer to an ast_sockaddr structure,
a hostname and an optional port and then dispatches parallel
"AAAA" and "A" record queries. If an "AAAA" record is returned,
it's parsed into the ast_sockaddr structure along with the port
if it was supplied. If no "AAAA" record was returned, the
first "A" record returned (if any) is parsed instead.
This is a synchronous call. If you need asynchronous lookups,
use ast_dns_query_set_resolve_async and roll your own.
Dan Cropp [Wed, 21 Aug 2019 15:58:00 +0000 (10:58 -0500)]
pjproject: Configurable setting for cnonce to include hyphens or not
NEC SIP Station interface with authenticated registration only supports cnonce
up to 32 characters. In Linux, PJSIP would generate 36 character cnonce
which included hyphens. Teluu developed this patch adding a compile time
setting to default to not include the hyphens. They felt it best to still
generate the UUID and strip the hyphens.
They have indicated it will be part of PJSIP 2.10.
ASTERISK-28509 Reported-by: Dan Cropp
Change-Id: Ibdfcf845d4f8c0a14df09fd983b11f2d72c5f470
projects / thirdparty / asterisk.git / log
