Linus Torvalds [Thu, 29 Jan 2026 19:09:13 +0000 (11:09 -0800)]
Merge tag 'mm-hotfixes-stable-2026-01-29-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. 9 are cc:stable, 12 are for MM.
There's a patch series from Pratyush Yadav which fixes a few things in
the new-in-6.19 LUO memfd code.
Plus the usual shower of singletons - please see the changelogs for
details"
* tag 'mm-hotfixes-stable-2026-01-29-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
vmcoreinfo: make hwerr_data visible for debugging
mm/zone_device: reinitialize large zone device private folios
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
mm/kfence: randomize the freelist on initialization
kho: kho_preserve_vmalloc(): don't return 0 when ENOMEM
kho: init alloc tags when restoring pages from reserved memory
mm: memfd_luo: restore and free memfd_luo_ser on failure
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
memfd: export alloc_file()
flex_proportions: make fprop_new_period() hardirq safe
mailmap: add entry for Viacheslav Bocharov
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
mm, swap: restore swap_space attr aviod kernel panic
mm/kasan: fix KASAN poisoning in vrealloc()
mm/shmem, swap: fix race of truncate and swap entry split
Linus Torvalds [Thu, 29 Jan 2026 17:07:17 +0000 (09:07 -0800)]
Merge tag 'for-6.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked folio refcount on s390x when using hw zlib compression
acceleration
- remove own threshold from ->writepages() which could collide with
cgroup limits and lead to a deadlock when metadadata are not written
because the amount is under the internal limit
* tag 'for-6.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zlib: fix the folio leak on S390 hardware acceleration
btrfs: do not strictly require dirty metadata threshold for metadata writepages
Jibin Zhang [Mon, 26 Jan 2026 15:21:11 +0000 (23:21 +0800)]
net: fix segmentation of forwarding fraglist GRO
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Paolo Abeni [Thu, 29 Jan 2026 12:21:35 +0000 (13:21 +0100)]
Merge tag 'wireless-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just one fix, for a parsing error in mac80211 that might
result in a one byte out-of-bounds read.
* tag 'wireless-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: correctly decode TTLM with default link map
====================
Benjamin Berg [Thu, 29 Jan 2026 10:33:50 +0000 (11:33 +0100)]
wifi: mac80211: correctly decode TTLM with default link map
TID-To-Link Mapping (TTLM) elements do not contain any link mapping
presence indicator if a default mapping is used and parsing needs to be
skipped.
Note that access points should not explicitly report an advertised TTLM
with a default mapping as that is the implied mapping if the element is
not included, this is even the case when switching back to the default
mapping. However, mac80211 would incorrectly parse the frame and would
also read one byte beyond the end of the element.
Reported-by: Ruikai Peng <ruikai@pwno.io> Closes: https://lore.kernel.org/linux-wireless/CAFD3drMqc9YWvTCSHLyP89AOpBZsHdZ+pak6zVftYoZcUyF7gw@mail.gmail.com Fixes: 702e80470a33 ("wifi: mac80211: support handling of advertised TID-to-link mapping") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20260129113349.d6b96f12c732.I69212a50f0f70db185edd3abefb6f04d3cb3e5ff@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
====================
mptcp: avoid dup NL events and propagate error
Here are two fixes affecting the MPTCP Netlink events with their tests:
- Patches 1 & 2: a subflow closed NL event was visible multiple times in
some specific conditions. A fix for v5.12.
- Patches 3 & 4: subflow closed NL events never contained the error
code, even when expected. A fix for v5.11.
Plus an extra fix:
- Patch 5: fix a false positive with the "signal addresses race test"
subtest when validating the MPTCP Join selftest on a v5.15.y stable
kernel.
====================
selftests: mptcp: join: fix local endp not being tracked
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mptcp: check subflow errors in close events
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
selftests: mptcp: check no dup close events after error
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
mptcp: avoid dup SUB_CLOSED events after disconnect
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Jianbo Liu [Tue, 27 Jan 2026 08:52:41 +0000 (10:52 +0200)]
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
Commit a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay
window size") introduced logic to setup the ESN replay window size.
This logic is only valid for packet offload.
However, the check to skip this block only covered outbound offloads.
It was not skipped for crypto offload, causing it to fall through to
the new switch statement and trigger its WARN_ON default case (for
instance, if a window larger than 256 bits was configured).
Fix this by amending the condition to also skip the replay window
setup if the offload type is not XFRM_DEV_OFFLOAD_PACKET.
Fixes: a5e400a985df ("net/mlx5e: Honor user choice of IPsec replay window size") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-5-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parav Pandit [Tue, 27 Jan 2026 08:52:40 +0000 (10:52 +0200)]
net/mlx5: Fix vhca_id access call trace use before alloc
HCA CAP structure is allocated in mlx5_hca_caps_alloc().
mlx5_mdev_init()
mlx5_hca_caps_alloc()
And HCA CAP is read from the device in mlx5_init_one().
The vhca_id's debugfs file is published even before above two
operations are done.
Due to this when user reads the vhca id before the initialization,
following call trace is observed.
Fix this by deferring debugfs publication until the HCA CAP is
allocated and read from the device.
Shay Drory [Tue, 27 Jan 2026 08:52:38 +0000 (10:52 +0200)]
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
The capability check for reset_root_to_default was inverted, causing
the function to return -EOPNOTSUPP when the capability IS supported,
rather than when it is NOT supported.
Fix the capability check condition.
Fixes: 3c9c34c32bc6 ("net/mlx5: fs, Command to control TX flow table root") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Mon, 26 Jan 2026 08:15:44 +0000 (16:15 +0800)]
net: phy: micrel: fix clk warning when removing the driver
Since the commit 25c6a5ab151f ("net: phy: micrel: Dynamically control
external clock of KSZ PHY"), the clock of Micrel PHY has been enabled
by phy_driver::resume() and disabled by phy_driver::suspend(). However,
devm_clk_get_optional_enabled() is used in kszphy_probe(), so the clock
will automatically be disabled when the device is unbound from the bus.
Therefore, this could cause the clock to be disabled twice, resulting
in clk driver warnings.
For example, this issue can be reproduced on i.MX6ULL platform, and we
can see the following logs when removing the FEC MAC drivers.
$ echo 2188000.ethernet > /sys/bus/platform/drivers/fec/unbind
$ echo 20b4000.ethernet > /sys/bus/platform/drivers/fec/unbind
[ 109.758207] ------------[ cut here ]------------
[ 109.758240] WARNING: drivers/clk/clk.c:1188 at clk_core_disable+0xb4/0xd0, CPU#0: sh/639
[ 109.771011] enet2_ref already disabled
[ 109.793359] Call trace:
[ 109.822006] clk_core_disable from clk_disable+0x28/0x34
[ 109.827340] clk_disable from clk_disable_unprepare+0xc/0x18
[ 109.833029] clk_disable_unprepare from devm_clk_release+0x1c/0x28
[ 109.839241] devm_clk_release from devres_release_all+0x98/0x100
[ 109.845278] devres_release_all from device_unbind_cleanup+0xc/0x70
[ 109.851571] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4
[ 109.859170] device_release_driver_internal from bus_remove_device+0xbc/0xe4
[ 109.866243] bus_remove_device from device_del+0x140/0x458
[ 109.871757] device_del from phy_mdio_device_remove+0xc/0x24
[ 109.877452] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac
[ 109.883918] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78
[ 109.890125] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158
[ 109.896076] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4
[ 109.962748] WARNING: drivers/clk/clk.c:1047 at clk_core_unprepare+0xfc/0x13c, CPU#0: sh/639
[ 109.975805] enet2_ref already unprepared
[ 110.002866] Call trace:
[ 110.031758] clk_core_unprepare from clk_unprepare+0x24/0x2c
[ 110.037440] clk_unprepare from devm_clk_release+0x1c/0x28
[ 110.042957] devm_clk_release from devres_release_all+0x98/0x100
[ 110.048989] devres_release_all from device_unbind_cleanup+0xc/0x70
[ 110.055280] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4
[ 110.062877] device_release_driver_internal from bus_remove_device+0xbc/0xe4
[ 110.069950] bus_remove_device from device_del+0x140/0x458
[ 110.075469] device_del from phy_mdio_device_remove+0xc/0x24
[ 110.081165] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac
[ 110.087632] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78
[ 110.093836] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158
[ 110.099782] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4
After analyzing the process of removing the FEC driver, as shown below,
it can be seen that the clock was disabled twice by the PHY driver.
fec_drv_remove()
--> fec_enet_close()
--> phy_stop()
--> phy_suspend()
--> kszphy_suspend() #1 The clock is disabled
--> fec_enet_mii_remove()
--> mdiobus_unregister()
--> phy_mdio_device_remove()
--> device_del()
--> devm_clk_release() #2 The clock is disabled again
Therefore, devm_clk_get_optional() is used to fix the above issue. And
to avoid the issue mentioned by the commit 985329462723 ("net: phy:
micrel: use devm_clk_get_optional_enabled for the rmii-ref clock"), the
clock is enabled by clk_prepare_enable() to get the correct clock rate.
Fixes: 25c6a5ab151f ("net: phy: micrel: Dynamically control external clock of KSZ PHY") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260126081544.983517-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka [Mon, 26 Jan 2026 19:38:17 +0000 (11:38 -0800)]
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
mlx5e_psp_handle_tx_skb() assumes skbs are ipv6 when doing a partial
TCP checksum with tso. Make correctly mlx5e_psp_handle_tx_skb() handle
ipv4 packets.
Jakub Kicinski [Thu, 29 Jan 2026 03:40:54 +0000 (19:40 -0800)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-27 (ixgbe, ice)
For ixgbe:
Kohei Enju adjusts the cleanup path on firmware error to resolve some
memory leaks and removes an instance of double init, free on ACI mutex.
For ice:
Aaron Ma adds NULL checks for q_vectors to avoid NULL pointer
dereference.
Jesse Brandeburg removes UDP checksum mismatch from being counted in Rx
errors.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
ixgbe: don't initialize aci lock in ixgbe_recovery_probe()
ixgbe: fix memory leaks in the ixgbe_recovery_probe() path
====================
Martin Kaiser [Tue, 27 Jan 2026 10:19:23 +0000 (11:19 +0100)]
net: bridge: fix static key check
Fix the check if netfilter's static keys are available. netfilter defines
and exports static keys if CONFIG_JUMP_LABEL is enabled. (HAVE_JUMP_LABEL
is never defined.)
Fixes: 971502d77faa ("bridge: netfilter: unroll NF_HOOK helper in bridge input path") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260127101925.1754425-1-martin@kaiser.cx Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfc: nci: Fix race between rfkill and nci_unregister_device().
syzbot reported the splat below [0] without a repro.
It indicates that struct nci_dev.cmd_wq had been destroyed before
nci_close_device() was called via rfkill.
nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which
(I think) was called from virtual_ncidev_close() when syzbot close()d
an fd of virtual_ncidev.
The problem is that nci_unregister_device() destroys nci_dev.cmd_wq
first and then calls nfc_unregister_device(), which removes the
device from rfkill by rfkill_unregister().
So, the device is still visible via rfkill even after nci_dev.cmd_wq
is destroyed.
Let's unregister the device from rfkill first in nci_unregister_device().
Note that we cannot call nfc_unregister_device() before
nci_close_device() because
1) nfc_unregister_device() calls device_del() which frees
all memory allocated by devm_kzalloc() and linked to
ndev->conn_info_list
2) nci_rx_work() could try to queue nci_conn_info to
ndev->conn_info_list which could be leaked
Thus, nfc_unregister_device() is split into two functions so we
can remove rfkill interfaces only before nci_close_device().
Linus Torvalds [Wed, 28 Jan 2026 16:03:11 +0000 (08:03 -0800)]
Merge tag 'pinctrl-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Mark the Meson GPIO controller as sleeping to avoid a
context splat
- Fix up the I2S2 and SWR TX group settings in the
Qualcomm SM8350 LPASS pin controller, and implement the
proper .get_direction() callback
- Fix a pin typo in the TG1520 pin controller
- Fix a group name in the Marvell armada 3710 XB pin
controller that got mangled in a DT schema rewrite
* tag 'pinctrl-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: marvell,armada3710-xb-pinctrl: fix 'usb32_drvvbus0' group name
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
pinctrl: th1520: Fix typo
pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins
pinctrl: meson: mark the GPIO controller as sleeping
Jordan Rhee [Tue, 27 Jan 2026 01:02:10 +0000 (01:02 +0000)]
gve: fix probe failure if clock read fails
If timestamping is supported, GVE reads the clock during probe,
which can fail for various reasons. Previously, this failure would
abort the driver probe, rendering the device unusable. This behavior
has been observed on production GCP VMs, causing driver initialization
to fail completely.
This patch allows the driver to degrade gracefully. If gve_init_clock()
fails, it logs a warning and continues loading the driver without PTP
support.
Cc: stable@vger.kernel.org Fixes: a479a27f4da4 ("gve: Move gve_init_clock to after AQ CONFIGURE_DEVICE_RESOURCES call") Signed-off-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Shachar Raindel <shacharr@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20260127010210.969823-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Mon, 26 Jan 2026 07:14:55 +0000 (09:14 +0200)]
net/mlx5e: Account for netdev stats in ndo_get_stats64
The driver's ndo_get_stats64 callback is only reporting mlx5 counters,
without accounting for the netdev stats, causing errors from the network
stack to be invisible in statistics.
Add netdev_stats_to_stats64() call to first populate the counters, then
add mlx5 counters on top, ensuring both are accounted for (where
appropriate).
Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch [Mon, 26 Jan 2026 07:14:54 +0000 (09:14 +0200)]
net/mlx5e: TC, delete flows only for existing peers
When deleting TC steering flows, iterate only over actual devcom
peers instead of assuming all possible ports exist. This avoids
touching non-existent peers and ensures cleanup is limited to
devices the driver is currently connected to.
Shay Drory [Mon, 26 Jan 2026 07:14:53 +0000 (09:14 +0200)]
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
It is possible to unbind the uplink ETH driver while the E-Switch is
in switchdev mode. This leads to netdevice reference counting issues[1],
as the driver removal path was not designed to clean up from this state.
During uplink ETH driver removal (_mlx5e_remove), the code now waits for
any concurrent E-Switch mode transition to finish. It then removes the
REPs auxiliary device, if exists. This ensures a graceful cleanup.
[1]
unregister_netdevice: waiting for eth2 to become free. Usage count = 2
ref_tracker: netdev@00000000c912e04b has 1/1 users at
ib_device_set_netdev+0x130/0x270 [ib_core]
mlx5_ib_vport_rep_load+0xf4/0x3e0 [mlx5_ib]
mlx5_esw_offloads_rep_load+0xc7/0xe0 [mlx5_core]
esw_offloads_enable+0x583/0x900 [mlx5_core]
mlx5_eswitch_enable_locked+0x1b2/0x290 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x107/0x3e0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
__x64_sys_sendto+0x20/0x30
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the beginning, the Intel ice driver has counted receive checksum
offload mismatches into the rx_errors member of the rtnl_link_stats64
struct. In ethtool -S these show up as rx_csum_bad.nic.
I believe counting these in rx_errors is fundamentally wrong, as it's
pretty clear from the comments in if_link.h and from every other statistic
the driver is summing into rx_errors, that all of them would cause a
"hardware drop" except for the UDP checksum mismatch, as well as the fact
that all the other causes for rx_errors are L2 reasons, and this L4 UDP
"mismatch" is an outlier.
A last nail in the coffin is that rx_errors is monitored in production and
can indicate a bad NIC/cable/Switch port, but instead some random series of
UDP packets with bad checksums will now trigger this alert. This false
positive makes the alert useless and affects us as well as other companies.
This packet with presumably a bad UDP checksum is *already* passed to the
stack, just not marked as offloaded by the hardware/driver. If it is
dropped by the stack it will show up as UDP_MIB_CSUMERRORS.
And one more thing, none of the other Intel drivers, and at least bnxt_en
and mlx5 both don't appear to count UDP offload mismatches as rx_errors.
Here is a related customer complaint:
https://community.intel.com/t5/Ethernet-Products/ice-rx-errros-is-too-sensitive-to-IP-TCP-attack-packets-Intel/td-p/1662125
Fixes: 4f1fe43c920b ("ice: Add more Rx errors to netdev's rx_error counter") Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Jake Keller <jacob.e.keller@intel.com> Cc: IWL <intel-wired-lan@lists.osuosl.org> Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add defensive checks for both the ring pointer and its q_vector
before dereferencing, allowing the system to resume successfully even when
q_vectors are unmapped.
Fixes: 2a5dc090b92cf ("ice: move netif_queue_set_napi to rtnl-protected sections") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kohei Enju [Thu, 11 Dec 2025 09:15:32 +0000 (18:15 +0900)]
ixgbe: don't initialize aci lock in ixgbe_recovery_probe()
hw->aci.lock is already initialized in ixgbe_sw_init(), so
ixgbe_recovery_probe() doesn't need to initialize the lock. This
function is also not responsible for destroying the lock on failures.
Additionally, change the name of label in accordance with this change.
Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/intel-wired-lan/aTcFhoH-z2btEKT-@horms.kernel.org/ Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kohei Enju [Thu, 11 Dec 2025 09:15:31 +0000 (18:15 +0900)]
ixgbe: fix memory leaks in the ixgbe_recovery_probe() path
When ixgbe_recovery_probe() is invoked and this function fails,
allocated resources in advance are not completely freed, because
ixgbe_probe() returns ixgbe_recovery_probe() directly and
ixgbe_recovery_probe() only frees partial resources, resulting in memory
leaks including:
- adapter->io_addr
- adapter->jump_tables[0]
- adapter->mac_table
- adapter->rss_key
- adapter->af_xdp_zc_qps
The leaked MMIO region can be observed in /proc/vmallocinfo, and the
remaining leaks are reported by kmemleak.
Don't return ixgbe_recovery_probe() directly, and instead let
ixgbe_probe() to clean up resources on failures.
Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 27 Jan 2026 18:39:17 +0000 (10:39 -0800)]
Merge tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
- Fix a gap in the initial VFIO DMABUF implementation where it's
required to explicitly implement a failing pin callback to prevent
pinned importers that cannot properly support move_notify.
(Leon Romanovsky)
* tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio:
vfio: Prevent from pinned DMABUF importers to attach to VFIO DMABUF
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reported-by: Chen Zhen <chenzhen126@huawei.com> Closes: https://lore.kernel.org/netdev/fae17c21-4940-5605-85b2-1d5e17342358@huawei.com/ CC: Jussi Maki <joamaki@gmail.com> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260123120659.571187-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.
Reported-by: Abel Vesa <abelvesa@kernel.org> Cc: stable@vger.kernel.org Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame().
syzbot reported various memory leaks related to NFC, struct
nfc_llcp_sock, sk_buff, nfc_dev, etc. [0]
The leading log hinted that nfc_llcp_send_ui_frame() failed
to allocate skb due to sock_error(sk) being -ENXIO.
ENXIO is set by nfc_llcp_socket_release() when struct
nfc_llcp_local is destroyed by local_cleanup().
The problem is that there is no synchronisation between
nfc_llcp_send_ui_frame() and local_cleanup(), and skb
could be put into local->tx_queue after it was purged in
local_cleanup():
Vivian Wang [Fri, 23 Jan 2026 03:52:23 +0000 (11:52 +0800)]
net: spacemit: Check for netif_carrier_ok() in emac_stats_update()
Some PHYs stop the refclk for power saving, usually while link down.
This causes reading stats to time out.
Therefore, in emac_stats_update(), also don't update and reschedule if
!netif_carrier_ok(). But that means we could be missing later updates if
the link comes back up, so also reschedule when link up is detected in
emac_adjust_link().
While we're at it, improve the comments and error message prints around
this to reflect the better understanding of how this could happen.
Hopefully if this happens again on new hardware, these comments will
direct towards a solution.
Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/ Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC") Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn> Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kery Qi [Fri, 23 Jan 2026 21:10:31 +0000 (05:10 +0800)]
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef4a ("rocker: introduce worlds infrastructure") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Thu, 22 Jan 2026 10:39:36 +0000 (02:39 -0800)]
vmcoreinfo: make hwerr_data visible for debugging
If the kernel is compiled with LTO, hwerr_data symbol might be lost, and
vmcoreinfo doesn't have it dumped. This is currently seen in some
production kernels with LTO enabled.
Remove the static qualifier from hwerr_data so that the information is
still preserved when the kernel is built with LTO. Making hwerr_data a
global symbol ensures its debug info survives the LTO link process and
appears in kallsyms. Also document it, so it doesn't get removed in
the future as suggested by akpm.
Link: https://lkml.kernel.org/r/20260122-fix_vmcoreinfo-v2-1-2d6311f9e36c@debian.org Fixes: 3fa805c37dd4 ("vmcoreinfo: track and log recoverable hardware errors") Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Zhiquan Li <zhiquan1.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Brost [Fri, 16 Jan 2026 11:10:16 +0000 (12:10 +0100)]
mm/zone_device: reinitialize large zone device private folios
Reinitialize metadata for large zone device private folios in
zone_device_page_init prior to creating a higher-order zone device private
folio. This step is necessary when the folio's order changes dynamically
between zone_device_page_init calls to avoid building a corrupt folio. As
part of the metadata reinitialization, the dev_pagemap must be passed in
from the caller because the pgmap stored in the folio page may have been
overwritten with a compound head.
Without this fix, individual pages could have invalid pgmap fields and
flags (with PG_locked being notably problematic) due to prior different
order allocations, which can, and will, result in kernel crashes.
Link: https://lkml.kernel.org/r/20260116111325.1736137-2-francois.dugast@intel.com Fixes: d245f9b4ab80 ("mm/zone_device: support large zone device private folios") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Francois Dugast <francois.dugast@intel.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Balbir Singh <balbirs@nvidia.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Waiman Long [Thu, 22 Jan 2026 18:43:43 +0000 (13:43 -0500)]
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
Commit 3acb913c9d5b ("mm/mm_init: use deferred_init_memmap_chunk() in
deferred_grow_zone()") made deferred_grow_zone() call
deferred_init_memmap_chunk() within a pgdat_resize_lock() critical section
with irqs disabled. It did check for irqs_disabled() in
deferred_init_memmap_chunk() to avoid calling cond_resched(). For a
PREEMPT_RT kernel build, however, spin_lock_irqsave() does not disable
interrupt but rcu_read_lock() is called. This leads to the following bug
report.
Fix it adding a new argument to deferred_init_memmap_chunk() to explicitly
tell it if cond_resched() is allowed or not instead of relying on some
current state information which may vary depending on the exact kernel
configuration options that are enabled.
Link: https://lkml.kernel.org/r/20260122184343.546627-1-longman@redhat.com Fixes: 3acb913c9d5b ("mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone()") Signed-off-by: Waiman Long <longman@redhat.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernrl.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pimyn Girgis [Tue, 20 Jan 2026 16:15:10 +0000 (17:15 +0100)]
mm/kfence: randomize the freelist on initialization
Randomize the KFENCE freelist during pool initialization to make
allocation patterns less predictable. This is achieved by shuffling the
order in which metadata objects are added to the freelist using
get_random_u32_below().
Additionally, ensure the error path correctly calculates the address range
to be reset if initialization fails, as the address increment logic has
been moved to a separate loop.
Ran Xiaokai [Thu, 22 Jan 2026 13:27:40 +0000 (13:27 +0000)]
kho: init alloc tags when restoring pages from reserved memory
Memblock pages (including reserved memory) should have their allocation
tags initialized to CODETAG_EMPTY via clear_page_tag_ref() before being
released to the page allocator. When kho restores pages through
kho_restore_page(), missing this call causes mismatched
allocation/deallocation tracking and below warning message:
alloc_tag was not set
WARNING: include/linux/alloc_tag.h:164 at ___free_pages+0xb8/0x260, CPU#1: swapper/0/1
RIP: 0010:___free_pages+0xb8/0x260
kho_restore_vmalloc+0x187/0x2e0
kho_test_init+0x3c4/0xa30
do_one_initcall+0x62/0x2b0
kernel_init_freeable+0x25b/0x480
kernel_init+0x1a/0x1c0
ret_from_fork+0x2d1/0x360
Add missing clear_page_tag_ref() annotation in kho_restore_page() to
fix this.
Link: https://lkml.kernel.org/r/20260122132740.176468-1-ranxiaokai627@163.com Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation") Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Graf <graf@amazon.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
When restoring a memfd, the file is created using shmem_file_setup().
While memfd creation also calls this function to get the file, it also
does other things:
1. The O_LARGEFILE flag is set on the file. If this is not done,
writes on the memfd exceeding 2 GiB fail.
2. FMODE_LSEEK, FMODE_PREAD, and FMODE_PWRITE are set on the file.
This makes sure the file is seekable and can be used with pread() and
pwrite().
3. Initializes the security field for the inode and makes sure that
inode creation is permitted by the security module.
Currently, none of those things are done. This means writes above 2 GiB
fail, pread(), and pwrite() fail, and so on. lseek() happens to work
because file_init_path() sets it because shmem defines fop->llseek.
Fix this by using memfd_alloc_file() to get the file to make sure the
initialization sequence for normal and preserved memfd is the same.
This series contains a couple of fixes for memfd preservation using LUO.
This patch (of 3):
The Live Update Orchestrator's (LUO) memfd preservation works by
preserving all the folios of a memfd, re-creating an empty memfd on the
next boot, and then inserting back the preserved folios.
Currently it creates the file by directly calling shmem_file_setup().
This leaves out other work done by alloc_file() like setting up the file
mode, flags, or calling the security hooks.
Export alloc_file() to let memfd_luo use it. Rename it to
memfd_alloc_file() since it is no longer private and thus needs a
subsystem prefix.
Jan Kara [Wed, 21 Jan 2026 11:27:30 +0000 (12:27 +0100)]
flex_proportions: make fprop_new_period() hardirq safe
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz Fixes: a91befde3503 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()") Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Bernd Schubert <bernd@bsbernd.com> Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/ Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Joanne Koong <joannelkoong@gmail.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my address <adeep@lexina.in> to new personal address <v@baodeep.com>
Old domain lexina.in will no longer be accessible due to registration
expiration.
Jane Chu [Tue, 20 Jan 2026 23:22:34 +0000 (16:22 -0700)]
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Chris Mason <clm@meta.com> Cc: David Hildenbrand <david@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Suren Baghdasaryan <surenb@google.com> Cc: William Roche <william.roche@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jane Chu [Tue, 20 Jan 2026 23:22:33 +0000 (16:22 -0700)]
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com Fixes: 18f41fa616ee ("mm: memory-failure: bump memory failure stats to pglist_data") Signed-off-by: Jane Chu <jane.chu@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Chris Mason <clm@meta.com> Cc: David Hildenbrand <david@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Suren Baghdasaryan <surenb@google.com> Cc: William Roche <william.roche@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
robin.kuo [Fri, 16 Jan 2026 06:25:00 +0000 (14:25 +0800)]
mm, swap: restore swap_space attr aviod kernel panic
commit 8b47299a411a ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com Fixes: 8b47299a411a ("mm, swap: mark swap address space ro and add context debug check") Signed-off-by: robin.kuo <robin.kuo@mediatek.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: andrew.yang <andrew.yang@mediatek.com> Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kairui Song <ryncsn@gmail.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Mathias Brugger <matthias.bgg@gmail.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Ryabinin [Tue, 13 Jan 2026 19:15:15 +0000 (20:15 +0100)]
mm/kasan: fix KASAN poisoning in vrealloc()
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
Kairui Song [Mon, 19 Jan 2026 16:11:21 +0000 (00:11 +0800)]
mm/shmem, swap: fix race of truncate and swap entry split
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com Fixes: 809bc86517cc ("mm: shmem: support large folio swap out") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Mon, 26 Jan 2026 17:30:48 +0000 (09:30 -0800)]
Merge tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the the buggy conversion of fuse_reverse_inval_entry() introduced
during the creation rework
- Disallow nfs delegation requests for directories by setting
simple_nosetlease()
- Require an opt-in for getting readdir flag bits outside of S_DT_MASK
set in d_type
- Fix scheduling delayed writeback work by only scheduling when the
dirty time expiry interval is non-zero and cancel the delayed work if
the interval is set to zero
- Use rounded_jiffies_interval for dirty time work
- Check the return value of sb_set_blocksize() for romfs
- Wait for batched folios to be stable in __iomap_get_folio()
- Use private naming for fuse hash size
- Fix the stale dentry cleanup to prevent a race that causes a UAF
* tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: document d_dispose_if_unused()
fuse: shrink once after all buckets have been scanned
fuse: clean up fuse_dentry_tree_work()
fuse: add need_resched() before unlocking bucket
fuse: make sure dentry is evicted if stale
fuse: fix race when disposing stale dentries
fuse: use private naming for fuse hash size
writeback: use round_jiffies_relative for dirtytime_work
iomap: wait for batched folios to be stable in __iomap_get_folio
romfs: check sb_set_blocksize() return value
docs: clarify that dirtytime_expire_seconds=0 disables writeback
writeback: fix 100% CPU usage when dirtytime_expire_interval is 0
readdir: require opt-in for d_type flags
vboxsf: don't allow delegations to be set on directories
ceph: don't allow delegations to be set on directories
gfs2: don't allow delegations to be set on directories
9p: don't allow delegations to be set on directories
smb/client: properly disallow delegations on directories
nfs: properly disallow delegation requests on directories
fuse: fix conversion of fuse_reverse_inval_entry() to start_removing()
Reported by the following Smatch static checker warning:
drivers/net/dsa/yt921x.c:702 yt921x_read_mib()
warn: was expecting a 64 bit value instead of '(~0)'
Fixes: 186623f4aa72 ("net: dsa: yt921x: Add support for Motorcomm YT921x") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/netdev/aPsjYKQMzpY0nSXm@stanley.mountain/ Suggested-by: David Laight <david.laight.linux@gmail.com> Signed-off-by: David Yang <mmyangfl@gmail.com> Link: https://patch.msgid.link/20260122170512.2713738-1-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zeng Chi [Fri, 23 Jan 2026 08:57:49 +0000 (16:57 +0800)]
net/mlx5: Fix return type mismatch in mlx5_esw_vport_vhca_id()
The function mlx5_esw_vport_vhca_id() is declared to return bool,
but returns -EOPNOTSUPP (-45), which is an int error code. This
causes a signedness bug as reported by smatch.
This patch fixes this smatch report:
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h:981 mlx5_esw_vport_vhca_id()
warn: signedness bug returning '(-45)'
Fixes: 1baf30426553 ("net/mlx5: E-Switch, Set/Query hca cap via vhca id") Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Zeng Chi <zengchi@kylinos.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260123085749.1401969-1-zeng_chi911@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kery Qi [Thu, 22 Jan 2026 17:04:01 +0000 (01:04 +0800)]
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown.
ipv6: use the right ifindex when replying to icmpv6 from localhost
When replying to a ICMPv6 echo request that comes from localhost address
the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the
skb device ifindex instead. This fixes pinging to a local address from
localhost source address.
$ ping6 -I ::1 2001:1:1::2 -c 3
PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes
64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms
64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms
2001:1:1::2 ping statistics
3 packets transmitted, 3 received, 0% packet loss, time 2032ms
rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms
Fixes: 1b70d792cf67 ("ipv6: Use rt6i_idev index for echo replies to a local address") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260121194409.6749-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zilin Guan [Fri, 23 Jan 2026 06:57:16 +0000 (06:57 +0000)]
net: mvpp2: cls: Fix memory leak in mvpp2_ethtool_cls_rule_ins()
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba18195d ("net: mvpp2: cls: Report an error for unsupported flow types") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Fri, 23 Jan 2026 16:16:34 +0000 (16:16 +0000)]
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015 Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sun, 25 Jan 2026 20:06:15 +0000 (12:06 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Linus Torvalds [Sun, 25 Jan 2026 18:06:23 +0000 (10:06 -0800)]
Merge tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Linus Torvalds [Sun, 25 Jan 2026 17:57:31 +0000 (09:57 -0800)]
Merge tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Linus Torvalds [Sun, 25 Jan 2026 17:53:28 +0000 (09:53 -0800)]
Merge tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
Linus Torvalds [Sun, 25 Jan 2026 17:42:25 +0000 (09:42 -0800)]
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
Srish Srinivasan [Fri, 23 Jan 2026 16:55:03 +0000 (22:25 +0530)]
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size") Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
gongqi [Thu, 22 Jan 2026 15:54:59 +0000 (23:54 +0800)]
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
feng [Sun, 25 Jan 2026 05:44:12 +0000 (21:44 -0800)]
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Linus Torvalds [Sun, 25 Jan 2026 02:55:48 +0000 (18:55 -0800)]
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Linus Torvalds [Sun, 25 Jan 2026 01:18:57 +0000 (17:18 -0800)]
Merge tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Dan Williams [Sat, 24 Jan 2026 01:22:56 +0000 (17:22 -0800)]
Documentation: Project continuity
Document project continuity procedures. This is a plan for a plan for
navigating events that affect the forward progress of the canonical
Linux repository, torvalds/linux.git.
It is a follow-up from Maintainer Summit [1].
Co-developed-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lwn.net/Articles/1050179/ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 24 Jan 2026 18:13:22 +0000 (10:13 -0800)]
Merge tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
Linus Torvalds [Sat, 24 Jan 2026 17:36:03 +0000 (09:36 -0800)]
Merge tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix auxiliary timekeeper update & locking bug
- Reduce the sensitivity of the clocksource watchdog,
to fix false positive measurements that marked the
TSC clocksource unstable
* tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Reduce watchdog readout delay limit to prevent false positives
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
Linus Torvalds [Sat, 24 Jan 2026 17:24:17 +0000 (09:24 -0800)]
Merge tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
Linus Torvalds [Sat, 24 Jan 2026 17:02:56 +0000 (09:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
Linus Torvalds [Fri, 23 Jan 2026 22:58:51 +0000 (14:58 -0800)]
Merge tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
Linus Torvalds [Fri, 23 Jan 2026 21:56:04 +0000 (13:56 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A set of fixes for FPSIMD/SVE/SME state management (around signal
handling and ptrace) where a task can be placed in an invalid state
- __nocfi added to swsusp_arch_resume() to avoid a data abort on
resuming from hibernate
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Set __nocfi on swsusp_arch_resume()
arm64/fpsimd: signal: Fix restoration of SVE context
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
Linus Torvalds [Fri, 23 Jan 2026 21:40:55 +0000 (13:40 -0800)]
Merge tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use the original nents value for ib_dma_unmap_sg(), preventing
potential memory corruption in the RDMA transport layer
- Fix a naming discrepancy in the kernel-doc for
ksmbd_vfs_kern_path_start_removing() as identified by sparse static
analysis
- Reset smb_direct_port to its default value during initialization to
ensure the correct port is used when switching between different RDMA
device types without module reload
* tag 'v6.19-rc6-server-fixes' of git://git.samba.org/ksmbd:
smb: server: reset smb_direct_port = SMB_DIRECT_PORT_INFINIBAND on init
smb: server: fix comment for ksmbd_vfs_kern_path_start_removing()
ksmbd: smbd: fix dma_unmap_sg() nents
Linus Torvalds [Fri, 23 Jan 2026 21:20:24 +0000 (13:20 -0800)]
Merge tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix the pci_do_resource_release_and_resize() failure path, which
clobbered the intended failure return value (Ilpo Järvinen)
- Restore resizable BAR size before value because the size determines
which bits are writable; this fixes i915 and xe regressions (Ilpo
Järvinen)
* tag 'pci-v6.19-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix Resizable BAR restore order
PCI: Fix BAR resize rollback path overwriting ret
* tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: acer-wmi: Fix missing capability check
platform/x86: acer-wmi: Extend support for Acer Nitro AN515-58
platform/x86: asus-armoury: add support for GA403WW
platform/x86: asus-armoury: keep the list ordered alphabetically
platform/x86: asus-armoury: add support for G835L
platform/x86: asus-armoury: fix ppt data for FA608UM
platform/x86: hp-bioscfg: Fix automatic module loading
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
platform/x86: asus-wmi: fix sending OOBE at probe
platform/x86: asus-armoury: add support for FA617XT
platform/x86: asus-armoury: add support for FA401UV
platform/x86: asus-armoury: add support for GV302XV
platform/x86: asus-armoury: Add power limits for Asus G513QY
platform/x86/amd: Fix memory leak in wbrf_record()
platform/mellanox: Fix SN5640/SN5610 LED platform data
docs: fix PPR for AMD EPYC broken link
docs: alienware-wmi: fix typo
platform/x86: asus-armoury: add support for GA403UV
asus-armoury: fix ppt data for GA403U* renaming to GA403UI
...
Linus Torvalds [Fri, 23 Jan 2026 21:12:49 +0000 (13:12 -0800)]
Merge tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove incorrect reset/clock mask for 8mq vpu
- rockchip: Fix initial state of PM domain
* tag 'pmdomain-v6.19-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain:rockchip: Fix init genpd as GENPD_STATE_ON before regulator ready
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
Linus Torvalds [Fri, 23 Jan 2026 20:53:56 +0000 (12:53 -0800)]
Merge tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
Linus Torvalds [Fri, 23 Jan 2026 20:51:00 +0000 (12:51 -0800)]
Merge tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a potential leak of an iovec, if a specific cleanup path is
used and the rw_cache is full at the time of the call
- Fix for a regression added in this cycle, where waitid should be
using prober release/acquire semantics for updating the wait queue
head
- Check for the cancelation bit being set for every work item processed
by io-wq, not just at the start of the loop. Has no real practical
implications other than to shut up syzbot doing crazy things that
grossly overload a system, hence slowing down ring exit
- A few selftest additions, updating the mini_liburing that selftests
use
* tag 'io_uring-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
selftests/io_uring: support NO_SQARRAY in miniliburing
selftests/io_uring: add io_uring_queue_init_params
io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop
io_uring/waitid: fix KCSAN warning on io_waitid->head
io_uring/rw: free potentially allocated iovec on cache put failure
Linus Torvalds [Fri, 23 Jan 2026 20:46:12 +0000 (12:46 -0800)]
Merge tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU: Fix potential NULL-ptr dereference in error path
of amd_iommu_probe_device()
- Generic IOMMUPT: Fix another compiler issue seen with older
compiler versions
- Fix signedness issue in ARM IO-PageTable code
* tag 'iommu-fixes-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
iommupt: Make it clearer to the compiler that pts.level == 0 for single page
iommu/amd: Fix error path in amd_iommu_probe_device()
Zilin Guan [Wed, 21 Jan 2026 13:05:51 +0000 (13:05 +0000)]
octeon_ep: Fix memory leak in octep_device_setup()
In octep_device_setup(), if octep_ctrl_net_init() fails, the function
returns directly without unmapping the mapped resources and freeing the
allocated configuration memory.
Fix this by jumping to the unsupported_dev label, which performs the
necessary cleanup. This aligns with the error handling logic of other
paths in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260121130551.3717090-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / kernel / linux.git / log
