Thorsten Blum [Fri, 19 Dec 2025 14:51:18 +0000 (15:51 +0100)]
crypto: ahash - Use unregister_ahashes in register_ahashes
Replace the for loop with a call to crypto_unregister_ahashes(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:17 +0000 (15:51 +0100)]
crypto: acomp - Use unregister_acomps in register_acomps
Replace the for loop with a call to crypto_unregister_acomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Qi Tao [Thu, 18 Dec 2025 13:44:52 +0000 (21:44 +0800)]
crypto: hisilicon/sec2 - support skcipher/aead fallback for hardware queue unavailable
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
Fixes: c16a70c1f253 ("crypto: hisilicon/sec - add new algorithm mode for AEAD") Signed-off-by: Qi Tao <taoqi10@huawei.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Thu, 18 Dec 2025 13:44:51 +0000 (21:44 +0800)]
crypto: hisilicon/hpre - support the hpre algorithm fallback
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
HPRE driver supports DH algorithm, limited to prime numbers up to 4K.
It supports prime numbers larger than 4K via fallback mechanism.
Chenghai Huang [Thu, 18 Dec 2025 13:44:50 +0000 (21:44 +0800)]
crypto: hisilicon/zip - support fallback for zip
When the hardware queue resource busy(no shareable queue)
or memery alloc fail in initialization of acomp_alg, use
soft algorithm to complete the work.
Fixes: 1a9e6f59caee ("crypto: hisilicon/zip - remove zlib and gzip") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:49 +0000 (21:44 +0800)]
crypto: hisilicon/qm - optimize device selection priority based on queue ref count and NUMA distance
Add device sorting criteria to prioritize devices with fewer
references and closer NUMA distances. Devices that are fully
occupied will not be prioritized for use.
Chenghai Huang [Thu, 18 Dec 2025 13:44:48 +0000 (21:44 +0800)]
crypto: hisilicon/qm - add reference counting to queues for tfm kernel reuse
Add reference counting to queues. When all queues are occupied, tfm
will reuse queues with the same algorithm type that have already
been allocated in the kernel. The corresponding queue will be
released when the reference count reaches 1.
Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:47 +0000 (21:44 +0800)]
crypto: hisilicon - consolidate qp creation and start in hisi_qm_alloc_qps_node
Consolidate the creation and start of qp into the function
hisi_qm_alloc_qps_node. This change eliminates the need for
each module to perform these steps in two separate phases
(creation and start).
Chenghai Huang [Thu, 18 Dec 2025 13:44:46 +0000 (21:44 +0800)]
crypto: hisilicon/qm - centralize the sending locks of each module into qm
When a single queue used by multiple tfms, the protection of shared
resources by individual module driver programs is no longer
sufficient. The hisi_qp_send needs to be ensured by the lock in qp.
Fixes: 5fdb4b345cfb ("crypto: hisilicon - add a lock for the qp send operation") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:45 +0000 (21:44 +0800)]
crypto: hisilicon/qm - enhance the configuration of req_type in queue attributes
Originally, when a queue was requested, it could only be configured
with the default algorithm type of 0. Now, when multiple tfms use
the same queue, the queue must be selected based on its attributes
to meet the requirements of tfm tasks. So the algorithm type
attribute of queue need to be distinguished. Just like a queue used
for compression in ZIP cannot be used for decompression tasks.
Fixes: 3f1ec97aacf1 ("crypto: hisilicon/qm - Put device finding logic into QM") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lizhi [Thu, 18 Dec 2025 13:44:44 +0000 (21:44 +0800)]
crypto: hisilicon/hpre: extend tag field to 64 bits for better performance
This commit expands the tag field in hpre_sqe structure from 16-bit
to 64-bit. The change enables storing request addresses directly
in the tag field, allowing callback functions to access request messages
without the previous indirection mechanism.
By eliminating the need for lookup tables, this modification reduces lock
contention and associated overhead, leading to improved efficiency and
simplified code.
Chenghai Huang [Thu, 18 Dec 2025 13:44:43 +0000 (21:44 +0800)]
crypto: hisilicon/sec - move backlog management to qp and store sqe in qp for callback
When multiple tfm use a same qp, the backlog data should be managed
centrally by the qp, rather than in the qp_ctx of each req.
Additionally, since SEC_BD_TYPE1 and SEC_BD_TYPE2 cannot use the
tag of the sqe to carry the virtual address of the req, the sent
sqe is stored in the qp. This allows the callback function to get
the req address. To handle the differences between hardware types,
the callback functions are split into two separate implementations.
Fixes: f0ae287c5045 ("crypto: hisilicon/sec2 - implement full backlog mode for sec") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:42 +0000 (21:44 +0800)]
crypto: hisilicon/zip - adjust the way to obtain the req in the callback function
In the shared queue design, multiple tfms use same qp, and one qp
need to corresponds to multiple qp_ctx. So use tag to obtain the
req virtual address. Build a one-to-one relationship between tfm
and qp_ctx. finaly remove the old get_tag operation.
Fixes: 2bcf36348ce5 ("crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init'") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thomas Fourier [Thu, 18 Dec 2025 10:12:57 +0000 (11:12 +0100)]
crypto: octeontx - fix dma_free_coherent() size
The size of the buffer in alloc_command_queues() is
curr->size + OTX_CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thomas Fourier [Thu, 18 Dec 2025 09:56:45 +0000 (10:56 +0100)]
crypto: cavium - fix dma_free_coherent() size
The size of the buffer in alloc_command_queues() is
curr->size + CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:45 +0000 (23:21 +0300)]
crypto: drbg - make drbg_get_random_bytes() return *void*
Now that drbg_get_random_bytes() always returns 0, checking its result at
the call sites stopped to make sense -- make this function return *void*
instead of *int*...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:44 +0000 (23:21 +0300)]
crypto: drbg - make drbg_fips_continuous_test() return bool
Currently, drbg_fips_continuous_test() only returns 0 and -EAGAIN, so an
early return from the *do*/*while* loop in drbg_get_random_bytes() just
isn't possible. Make drbg_fips_continuous_test() return bool instead of
*int* (using true instead of 0 and false instead of -EAGAIN). This way,
we can further simplify drbg_get_random_bytes()...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:43 +0000 (23:21 +0300)]
crypto: drbg - kill useless variable in drbg_fips_continuous_test()
In drbg_fips_continuous_test(), not only the initializer of the ret local
variable is useless, the variable itself does not seem needed as it only
stores the result of memcmp() until it's checked on the next line -- get
rid of the variable...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Mon, 15 Dec 2025 12:26:05 +0000 (13:26 +0100)]
crypto: octeontx2 - Use sysfs_emit in sysfs show functions
Replace sprintf() with sysfs_emit() in sso_pf_func_ovrd_show() and
kvf_limits_show(). sysfs_emit() is preferred for formatting sysfs output
as it performs proper bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Mon, 15 Dec 2025 07:23:52 +0000 (08:23 +0100)]
crypto: iaa - Replace sprintf with sysfs_emit in sysfs show functions
Replace sprintf() with sysfs_emit() in verify_compress_show() and
sync_mode_show(). sysfs_emit() is preferred to format sysfs output as it
provides better bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 11 Dec 2025 10:15:55 +0000 (11:15 +0100)]
crypto: algapi - Use crypto_unregister_algs in crypto_register_algs
Replace the for loop with a call to crypto_unregister_algs(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code.
In crypto_unregister_algs(), unregister the algorithms in reverse order.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 11 Dec 2025 08:52:51 +0000 (09:52 +0100)]
crypto: scompress - Use crypto_unregister_scomps in crypto_register_scomps
Replace the for loop with a call to crypto_unregister_scomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Harshal Dev [Thu, 11 Dec 2025 08:44:59 +0000 (14:14 +0530)]
dt-bindings: crypto: qcom,prng: document x1e80100
Document x1e80100 compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Can Peng [Mon, 8 Dec 2025 09:50:10 +0000 (17:50 +0800)]
crypto: fips - annotate fips_enable() with __init to free init memory after boot
The fips_enable() function is only invoked early during kernel boot via the
__setup() macro ("fips=" command line parameter), and is never used again
after initialization completes.
Annotating it with __init places the function in the .init.text section,
allowing the kernel to free its memory after init (when freeing_initmem()
runs), reducing runtime memory footprint.
This is a standard practice for setup/early-parse functions and has no
functional impact — the parsing logic, return values, and fips mode
setting behavior remain unchanged.
Signed-off-by: Can Peng <pengcan@kylinos.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 28 Nov 2025 13:54:12 +0000 (14:54 +0100)]
crypto: iaa - Remove unreachable pr_debug from iaa_crypto_cleanup_module
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 27 Nov 2025 14:01:57 +0000 (15:01 +0100)]
crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org Fixes: b190447e0fa3 ("crypto: iaa - Add compression mode management along with fixed mode") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Wed, 26 Nov 2025 09:46:13 +0000 (10:46 +0100)]
crypto: octeontx - Fix length check to avoid truncation in ucode_load_store
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h:251:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/starfive/jh7110-cryp.h:219:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:30:46 +0000 (16:30 +0000)]
crypto: qat - fix warning on adf_pfvf_pf_proto.c
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a58f ("crypto: qat - introduce support for PFVF block messages") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:30:19 +0000 (16:30 +0000)]
crypto: qat - add bank state save and restore for qat_420xx
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:29:23 +0000 (16:29 +0000)]
crypto: qat - fix parameter order used in ICP_QAT_FW_COMN_FLAGS_BUILD
The macro ICP_QAT_FW_COMN_FLAGS_BUILD sets flags in the firmware
descriptor to indicate:
* Whether the content descriptor is a pointer or contains embedded
data.
* Whether the source and destination buffers are scatter-gather lists
or flat buffers.
The correct parameter order is:
* First: content descriptor type
* Second: source/destination pointer type
In the asymmetric crypto code, the macro was used with the parameters
swapped. Although this does not cause functional issues, since both
macros currently evaluate to 0, it is incorrect.
Fix the parameter order in the Diffie-Hellman and RSA code paths.
Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm") Fixes: c9839143ebbf ("crypto: qat - Add DH support") Reported-by: Qihua Dai <qihua.dai@intel.com> # off-list Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 20 Nov 2025 13:21:24 +0000 (21:21 +0800)]
crypto: hisilicon/qm - fix incorrect judgment in qm_get_complete_eqe_num()
In qm_get_complete_eqe_num(), the function entry has already
checked whether the interrupt is valid, so the interrupt event
can be processed directly. Currently, the interrupt valid bit is
being checked again redundantly, and no interrupt processing is
performed. Therefore, the loop condition should be modified to
directly process the interrupt event, and use do while instead of
the current while loop, because the condition is always satisfied
on the first iteration.
Fixes: f5a332980a68 ("crypto: hisilicon/qm - add the save operation of eqe and aeqe") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Wed, 17 Dec 2025 06:15:41 +0000 (14:15 +0800)]
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Linus Torvalds [Sat, 13 Dec 2025 18:04:16 +0000 (06:04 +1200)]
Merge tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Linus Torvalds [Sat, 13 Dec 2025 08:55:12 +0000 (20:55 +1200)]
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com> Reported-by: Jeff Layton <jlayton@kernel.org> Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()") Signed-off-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Dec 2025 07:57:41 +0000 (19:57 +1200)]
x86/hv: Add gitignore entry for generated header file
Commit 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Linus Torvalds [Sat, 13 Dec 2025 05:39:28 +0000 (17:39 +1200)]
Merge tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Linus Torvalds [Sat, 13 Dec 2025 05:15:16 +0000 (17:15 +1200)]
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Linus Torvalds [Sat, 13 Dec 2025 05:09:06 +0000 (17:09 +1200)]
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Linus Torvalds [Sat, 13 Dec 2025 04:36:57 +0000 (16:36 +1200)]
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
Linus Torvalds [Sat, 13 Dec 2025 04:09:10 +0000 (16:09 +1200)]
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Dave Airlie [Sat, 13 Dec 2025 00:54:28 +0000 (10:54 +1000)]
Merge tag 'drm-misc-fixes-2025-12-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Not that other existing usage of __free() in this context is a corret
exception initialized to NULL, because the actual allocation is branched
in if().
Linus Torvalds [Fri, 12 Dec 2025 17:44:03 +0000 (05:44 +1200)]
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
- Fix chacha-riscv64-zvkb.S to not use frame pointer for data"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: arm64/ghash - Fix incorrect output from ghash-neon
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
lib/crypto: blake2s: Replace manual unrolling with unrolled_full
lib/crypto: blake2b: Roll up BLAKE2b round loop on 32-bit
lib/crypto: riscv: Depend on RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
lib/crypto: riscv/chacha: Avoid s0/fp register
Linus Torvalds [Fri, 12 Dec 2025 10:04:18 +0000 (22:04 +1200)]
Merge tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Always initialize DMA state, fixing a potentially nasty issue on the
block side
- btrfs zoned write fix with cached zone reports
- Fix corruption issues in bcache with chained bio's, and further make
it clear that the chained IO handler is simply a marker, it's not
code meant to be executed
- Kill old code dealing with synchronous IO polling in the block layer,
that has been dead for a long time. Only async polling is supported
these days
- Fix a lockdep issue in tag_set management, moving it to RCU
- Fix an issue with ublks bio_vec iteration
- Don't unconditionally enforce blocking issue of ublk control
commands, allow some of them with non-blocking issue as they
do not block
* tag 'block-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq-dma: always initialize dma state
blk-mq: delete task running check in blk_hctx_poll()
block: fix cached zone reports on devices with native zone append
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
ublk: don't mutate struct bio_vec in iteration
block: prohibit calls to bio_chain_endio
bcache: fix improper use of bi_end_io
ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue
Linus Torvalds [Fri, 12 Dec 2025 10:01:32 +0000 (22:01 +1200)]
Merge tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Single fix for io_uring headed to stable, fixing an issue introduced
with the min_wait support earlier this year, where SQPOLL didn't get
correctly woken if an event arrived once the event waiting has
finished the min_wait portion.
As we already have regression tests for this added and people
reporting new failures there, let's get this one flushed out
so it can bubble back down to stable as well"
* tag 'io_uring-6.19-20251211' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix min_wait wakeups for SQPOLL
Linus Torvalds [Fri, 12 Dec 2025 09:59:19 +0000 (21:59 +1200)]
Merge tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- minor cleanup
- minor update to comment to avoid confusion about fs type
* tag 'v6.19-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: add comment to FileSystemName of FileFsAttributeInformation
smb/server: remove unused nterr.h
smb/server: rename include guard in smb_common.h
Linus Torvalds [Fri, 12 Dec 2025 09:52:42 +0000 (21:52 +1200)]
Merge tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
Brendan Jackman [Sun, 7 Dec 2025 03:53:18 +0000 (03:53 +0000)]
bug: Hush suggest-attribute=format for __warn_printf()
Recent additions to this function cause GCC 14.3.0 to get excited
(W=1) and suggest a missing attribute:
lib/bug.c: In function '__warn_printf':
lib/bug.c:187:25: error: function '__warn_printf' be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
187 | vprintk(fmt, *args);
| ^~~~~~~
Disable the diagnostic locally, following the pattern used for stuff
like va_format().
Heiko Carstens [Mon, 8 Dec 2025 20:06:58 +0000 (21:06 +0100)]
bug: Let report_bug_entry() provide the correct bugaddr
report_bug_entry() always provides zero for bugaddr but could easily
extract the correct address from the provided bug_entry. Just do that to
have proper warning messages.
E.g. adding an artificial:
void foo(void) { WARN_ONCE(1, "bar"); }
function generates this warning message:
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
^^^
With the correct bug address this changes to:
WARNING: arch/s390/kernel/setup.c:1017 at foo+0x1c/0x40, CPU#0: swapper/0/0
^^^^^^^^^^^^^
Evan Li [Fri, 12 Dec 2025 08:49:43 +0000 (16:49 +0800)]
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") Reported-by: kitta <kitta@linux.alibaba.com> Co-developed-by: kitta <kitta@linux.alibaba.com> Signed-off-by: Evan Li <evan.li@linux.alibaba.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Linus Torvalds [Thu, 11 Dec 2025 03:13:29 +0000 (12:13 +0900)]
Merge tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Linus Torvalds [Thu, 11 Dec 2025 00:57:08 +0000 (09:57 +0900)]
Merge tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for SPI that came in during the merge window,
nothing too exciting here"
* tag 'spi-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: Fix an error handling path in mchp_corespi_probe()
spi: cadence-qspi: Fix runtime PM imbalance in probe
Linus Torvalds [Thu, 11 Dec 2025 00:54:59 +0000 (09:54 +0900)]
Merge tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
Arnd Bergmann [Thu, 4 Dec 2025 10:01:58 +0000 (11:01 +0100)]
mm: memfd_luo: add CONFIG_SHMEM dependency
The new memfd code fails to link without SHMEM:
aarch64-linux-ld: mm/memfd_luo.o: in function `memfd_luo_retrieve_folios':
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0xdc): undefined reference to `shmem_add_to_page_cache'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x11c): undefined reference to `shmem_inode_acct_blocks'
memfd_luo.c:(.text.memfd_luo_retrieve_folios+0x134): undefined reference to `shmem_recalc_inode'
Add a Kconfig dependency to disallow that configuration.
Arnd Bergmann [Thu, 4 Dec 2025 10:28:59 +0000 (11:28 +0100)]
mm: shmem: avoid build warning for CONFIG_SHMEM=n
The newly added 'flags' variable is unused and causes a warning if
CONFIG_SHMEM is disabled, since the shmem_acct_size() macro it is passed
into does nothing:
mm/shmem.c: In function '__shmem_file_setup':
mm/shmem.c:5816:23: error: unused variable 'flags' [-Werror=unused-variable]
5816 | unsigned long flags = (vm_flags & VM_NORESERVE) ? SHMEM_F_NORESERVE : 0;
| ^~~~~
Replace the two macros with equivalent inline functions to get the
argument checking.
Link: https://lkml.kernel.org/r/20251204102905.1048000-1-arnd@kernel.org Fixes: 6ff1610ced56 ("mm: shmem: use SHMEM_F_* flags instead of VM_* flags") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Christian Brauner <brauner@kernel.org> Cc: guoweikang <guoweikang.kernel@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: invalidate inode if i_mode is zero after block read
A panic occurs in ocfs2_unlink due to WARN_ON(inode->i_nlink == 0) when
handling a corrupted inode with i_mode=0 and i_nlink=0 in memory.
This "zombie" inode is created because ocfs2_read_locked_inode proceeds
even after ocfs2_validate_inode_block successfully validates a block that
structurally looks okay (passes checksum, signature etc.) but contains
semantically invalid data (specifically i_mode=0). The current validation
function doesn't check for i_mode being zero.
This results in an in-memory inode with i_mode=0 being added to the VFS
cache, which later triggers the panic during unlink.
Prevent this by adding an explicit check for (i_mode == 0, i_nlink == 0,
non-orphan) within ocfs2_validate_inode_block. If the check is true,
return -EFSCORRUPTED to signal corruption. This causes the caller
(ocfs2_read_locked_inode) to invoke make_bad_inode(), correctly preventing
the zombie inode from entering the cache.
Link: https://lkml.kernel.org/r/20251202224507.53452-2-eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reported-by: syzbot+55c40ae8a0e5f3659f2b@syzkaller.appspotmail.com Fixes: https://syzkaller.appspot.com/bug?extid=55c40ae8a0e5f3659f2b Link: https://lore.kernel.org/all/20251022222752.46758-2-eraykrdg1@gmail.com/T/ Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warning:
fs/ocfs2/xattr.c:52:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it.
This overlays the trailing MEMBER struct ocfs2_extent_rec er; onto the FAM
struct ocfs2_xattr_value_root::xr_list.l_recs[], while keeping the FAM and
the start of MEMBER aligned.
The static_assert() ensures this alignment remains, and it's intentionally
placed inmediately after the related structure --no blank line in between.
Link: https://lkml.kernel.org/r/aRKm_7aN7Smc3J5L@kspp Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
Now that the centralized `ocfs2_emergency_state()` helper is available,
refactor remaining filesystem-wide checks for `ocfs2_is_soft_readonly` and
`ocfs2_is_hard_readonly` to use this new function.
To ensure strict consistency with the previous behavior and guarantee no
functional changes, the call sites continue to explicitly return -EROFS
when the emergency state is detected. This standardizes the check logic
while preserving the existing error handling flow.
Link: https://lkml.kernel.org/r/3421641b54ad6b6e4ffca052351b518eacc1bd08.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: David Hunter <david.hunter.linux@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: add ocfs2_emergency_state helper and apply to setattr
Patch series "ocfs2: Refactor read-only checks to use
ocfs2_emergency_state", v4.
Following the fix for the `make_bad_inode` validation failure (syzbot ID: b93b65ee321c97861072), this separate series introduces a new helper
function, `ocfs2_emergency_state()`, to improve and centralize read-only
and error state checking.
This is modeled after the `ext4_emergency_state()` pattern, providing a
single, unified location for checking all filesystem-level emergency
conditions. This makes the code cleaner and ensures that any future
checks (e.g., for fatal error states) can be added in one place.
This series is structured as follows:
1. The first patch introduces the `ocfs2_emergency_state()` helper
(currently checking for -EROFS) and applies it to `ocfs2_setattr`
to provide a "fail-fast" mechanism, as suggested by Albin
Babu Varghese.
2. The second patch completes the refactoring by converting all
remaining read-only checks throughout OCFS2 to use this new helper.
This patch (of 2):
To centralize error checking, follow the pattern of other filesystems like
ext4 (which uses `ext4_emergency_state()`), and prepare for future
enhancements, this patch introduces a new helper function:
`ocfs2_emergency_state()`.
The purpose of this helper is to provide a single, unified location for
checking all filesystem-level emergency conditions. In this initial
implementation, the function only checks for the existing hard and soft
read-only modes, returning -EROFS if either is set.
This provides a foundation where future checks (e.g., for fatal error
states returning -EIO, or shutdown states) can be easily added in one
place.
This patch also adds this new check to the beginning of `ocfs2_setattr()`.
This ensures that operations like `ftruncate` (which triggered the
original BUG) fail-fast with -EROFS when the filesystem is already in a
read-only state.
Link: https://lkml.kernel.org/r/cover.1764728893.git.eraykrdg1@gmail.com Link: https://lkml.kernel.org/r/e9e975bcaaff8dbc155b70fbc1b2798a2e36e96f.1764728893.git.eraykrdg1@gmail.com Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com> Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com> Suggested-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: David Hunter <david.hunter.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ally Heev [Wed, 3 Dec 2025 15:28:49 +0000 (20:58 +0530)]
checkpatch: add uninitialized pointer with __free attribute check
Uinitialized pointers with __free attribute can cause undefined behavior
as the memory randomly assigned to the pointer is freed automatically when
the pointer goes out of scope. add check in checkpatch to detect such
issues.
syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the
`cl_next_free_rec` field of the allocation chain list (next free slot in
the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)
condition in ocfs2_find_victim_chain() and panicking the kernel.
To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),
just before calling ocfs2_find_victim_chain(), the code block in it being
executed when either of the following conditions is true:
1. `cl_next_free_rec` is equal to 0, indicating that there are no free
chains in the allocation chain list
2. `cl_next_free_rec` is greater than `cl_count` (the total number of
chains in the allocation chain list)
Either of them being true is indicative of the fact that there are no
chains left for usage.
This is addressed using ocfs2_error(), which prints
the error log for debugging purposes, rather than panicking the kernel.
Link: https://lkml.kernel.org/r/20251201130711.143900-1-activprithvi@gmail.com Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com> Reported-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=96d38c6e1655c1420a72 Tested-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pasha Tatashin [Sun, 30 Nov 2025 01:09:19 +0000 (20:09 -0500)]
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
The kernel test robot reported a Smatch warning:
kernel/liveupdate/luo_core.c:402 luo_ioctl() warn: unsigned 'nr' is
never less than zero.
This occurs because 'nr' is unsigned and LIVEUPDATE_CMD_BASE is currently
defined as 0, making the check (nr < LIVEUPDATE_CMD_BASE) always false.
Remove the explicit lower bound check. The logic remains correct because
'nr' is unsigned; if nr is less than LIVEUPDATE_CMD_BASE, the expression
(nr - LIVEUPDATE_CMD_BASE) will wrap around to a large positive value.
This will inevitably be larger than ARRAY_SIZE(luo_ioctl_ops) and be
caught by the upper bound check.
Link: https://lkml.kernel.org/r/20251130010919.1488230-1-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511280300.6pvBmXUS-lkp@intel.com/ Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Matlack <dmatlack@google.com> Cc: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
Add comprehensive validation of inline xattr metadata in
ocfs2_xattr_ibody_list() to prevent out-of-bounds access and
use-after-free bugs when processing corrupted inline xattrs.
The patch adds two critical validations:
1. Validates i_xattr_inline_size before use:
- Ensures it does not exceed block size
- Ensures it is at least large enough for xattr header
- Prevents pointer arithmetic with corrupted size values that could
point outside the inode block
2. Validates xattr entry count (xh_count):
- Calculates maximum entries that can fit in the inline space
- Rejects counts that exceed this limit
- Prevents out-of-bounds array access in subsequent code
Without these checks, a corrupted filesystem with invalid inline xattr
metadata can cause the code to access memory beyond the allocated space.
For example:
- A corrupted i_xattr_inline_size of 0 would cause header pointer
calculation to point past the end of the block
- A corrupted xh_count of 22 with inline_size of 256 would cause
array access 7 entries beyond the 15 that actually fit (the syzbot
reproducer used xh_count of 20041), leading to use-after-free when
accessing freed memory pages
The validation uses the correct inline_size (from di->i_xattr_inline_size)
rather than block size, ensuring accurate bounds checking for inline
xattrs specifically.
Thorsten Blum [Wed, 26 Nov 2025 11:44:15 +0000 (12:44 +0100)]
ocfs2: replace deprecated strcpy with strscpy
strcpy() has been deprecated [1] because it performs no bounds checking on
the destination buffer, which can lead to buffer overflows. Replace it
with the safer strscpy(). No functional changes.
projects / thirdparty / kernel / linux.git / log
