Felix Fietkau [Tue, 27 Dec 2016 19:54:15 +0000 (20:54 +0100)]
ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.
Felix Fietkau [Tue, 27 Dec 2016 11:10:53 +0000 (12:10 +0100)]
ath9k: remove old rx dma stop check optimization
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued
opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Tue, 27 Dec 2016 03:41:30 +0000 (04:41 +0100)]
Revert "opkg: vfork external gzip command to uncompress data"
This reverts commit 0090adcd5c94adad2168cd9b338f45827533c81d.
It breaks reading package list in /tmp/opkg-lists, making it impossible
to install packages from feeds in snapshots.
Alberto Bursi [Sat, 24 Dec 2016 12:32:26 +0000 (13:32 +0100)]
package/Makefile & ipkg-make-index.sh: add full package data list
The external script used to generate the package lists for the
LEDE wiki's table of packages [1] and package indexes [2] requires
a "Source:" field in the package lists to find package makefiles.
The package makefiles are used to read the package's Category and Submenu.
Add a separate package list file with full data to be used by the wiki's script.
It's called Packages.manifest and isn't compressed as it's not necessary.
opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Sun, 25 Dec 2016 19:56:45 +0000 (20:56 +0100)]
netifd: Upstep to git HEAD version
64a655d proto: allow configuring deprecated static IPv6 addresses c99182e remove obsolete /opt/local prefix on Mac OS X 0249d5f system-linux: Don't set gre tunnel ttl by default to 64 (#FS312) edc15ca ubus: Display the IPv6 prefix assigned address
Hauke Mehrtens [Sun, 25 Dec 2016 14:19:20 +0000 (15:19 +0100)]
ppc44x: fix build of crypto4xx_core.c
crypto4xx_probe() is in the __init section and referenced by code form
other sections, which causes a build error. Backport a patch from
mainline kernel to fix this.
Hauke Mehrtens [Sat, 17 Dec 2016 14:00:59 +0000 (15:00 +0100)]
kernel: add KERNEL_DEVMEM and KERNEL_DEVKMEM
These options are needed to create /dev/mem or /dev/kmem .
/dev/mem is needed by the io tool to access raw hardware memory, which
is helpful when debugging and developing drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
Zefir Kurtisi [Thu, 22 Dec 2016 09:39:51 +0000 (10:39 +0100)]
libpcap: Fix build when PACKAGECONFIG ipv6 is not enabled
Add patches provided upstream [1] by Fabio Berton to fix error:
> ./gencode.c: In function 'pcap_compile':
> ./gencode.c:693:8: error: 'compiler_state_t {aka struct _compiler_state}' has no member named 'ai'
> cstate.ai = NULL;
> ^
> ./gencode.c: In function 'gen_gateway':
> ./gencode.c:4914:13: error: 'cstate' undeclared (first use in this function)
> bpf_error(cstate, "direction applied to 'gateway'");
> ^
Mathias Kresin [Thu, 22 Dec 2016 08:18:05 +0000 (09:18 +0100)]
lantiq: drop the FRITZ7360SL led-dsl alias
The power LED can not be used for indicating the xDSL line state and
the in system (boot) state at the same time in LEDE. As soon as the
xDSL Line goes down, the power LED is switched off.
During xDSL handshake the power led would blink with the same or a
similar pattern as during boot.
Mathias Kresin [Fri, 23 Dec 2016 08:46:48 +0000 (09:46 +0100)]
ramips: use different board names for variants
Use different names for flash size related board variants, to make sure
that only images for the actual flash size are considered as valid by
the image validation code.
Remove the flash size suffix from the string returned by
ramips_board_detect() to ensure that existing scripts relying on the
former used boardname are still working.
Mathias Kresin [Thu, 1 Dec 2016 06:37:03 +0000 (07:37 +0100)]
ramips: fix image validation errors
The name from the Device define will be used in the metadata. Due to
typos/different spelling, this name might not match the one exported in
/lib/ramips.sh.
Fix all name mismatches which were found by checking if the name used
in the metadata exists in /lib/ramips.sh.
Felix Fietkau [Thu, 22 Dec 2016 16:04:12 +0000 (17:04 +0100)]
kirkwood: clean up FEATURES
Remove dt: it is implicitly enabled based on the kernel config
Remove tar.gz and jffs2_nand: Legacy build code has been removed,
NAND devices are only supported with UBI now.
Remove ubifs: deprecated, use squashfs images instead
Jo-Philipp Wich [Fri, 23 Dec 2016 18:15:14 +0000 (19:15 +0100)]
generic: ar8216: fix invalid bounds check imported from ChromeOS (FS#347)
The priv->vlan_id member is of size AR8X16_MAX_VLANS, not AR8X16_MAX_PORTS,
so check for the proper maximum value in order to avoid capping valid VLAN IDs
to 7 (AR8X16_MAX_PORTS - 1).
Felix Fietkau [Thu, 22 Dec 2016 15:43:07 +0000 (16:43 +0100)]
uhttpd: drop uhttpd-mod-tls, it has been useless for years
Before the rewrite, uhttpd-mod-tls used to contain a tls plugin.
Afterwards it was left in for compatibility reasons, but given how much
has changed, and that we're about to change the default SSL
implementation again, it's better to just drop this now
Felix Fietkau [Wed, 21 Dec 2016 15:39:56 +0000 (16:39 +0100)]
build: add defaults for PKG_SOURCE, PKG_SOURCE_SUBDIR, PKG_VERSION
This makes it easier to unify versioning of git based package downloads.
PKG_SOURCE_DATE along with an 8-character abbreviation of the git hash
is used as PKG_VERSION, PKG_RELEASE should be used like normal packages.
Pavel Kubelun [Tue, 20 Dec 2016 08:39:00 +0000 (11:39 +0300)]
ath10k-firmware: update qca9984 firmware
A new firmware that is available on code-aurora repository is newer
than in Kvalo's repo.
Taking into account that firmwares that are in Kvalo's repo are considered
to be tested by internal QCA team, this one seems to be more stable
and fixes this bug:
ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in
push mode
At least i havent faced it for a while in contradiction to current version.
Thus switching firmware source for qca9984 until it or a newer version
gets into Kvalo's repo.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
gettext-full: enforce only static lib on the host build
Sometimes I'm getting error on the host-side build:
```
/usr/lib64/gcc/x86_64-suse-linux/4.8/../../../../x86_64-suse-linux/bin/ld: /home/sandu/work/lede/staging_dir/host/lib/liblzma.a(liblzma_la-common.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/home/sandu/work/lede/staging_dir/host/lib/liblzma.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status
Makefile:2847: recipe for target 'libgettextlib.la' failed
make[9]: *** [libgettextlib.la] Error 1
make[9]: Leaving directory '/home/sandu/work/lede/build_dir/target-x86_64_musl-1.1.15/host/gettext-0.19.8.1/gettext-tools/gnulib-lib'
Makefile:2597: recipe for target 'all' failed
```
Disabling the shared-lib build, seems to fix this.
This is when building glib2 on the host-side.
glib2 is required by newer QEMU package [which is in the feeds].
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Tedaz [Tue, 20 Dec 2016 08:56:33 +0000 (16:56 +0800)]
x86/64: enable Hyper-V support in the x86_64 kernel config
Enabled Hyper-V network interface card driver, display adapter driver,
storage driver, keyboard driver, mouse driver and Hyper-V utility and
EFI boot support in the kernel for subtarget x86/64.
Convert the img file to vhd by Ubuntu qemu-img, rather than by the buildroot's
built-in qemu-img.
Tested on Windows Server 2008 r2 and 2012 r2 Gen1 and Gen2 VMs.
Magnus Kroken [Sat, 10 Dec 2016 11:11:33 +0000 (12:11 +0100)]
openvpn: update to 2.4_rc2
OpenVPN 2.4 builds with mbedTLS 2.x, rename openvpn-polarssl
variant to openvpn-mbedtls.
Some feature highlights:
* Data channel cipher negotiation
* AEAD cipher support for data channel encryption (currently only
* AES-GCM)
* ECDH key exchange for control channel
* LZ4 compression support
See https://github.com/OpenVPN/openvpn/blob/master/Changes.rst
for additional change notes.
Tal Keren [Thu, 7 Jan 2016 00:40:48 +0000 (02:40 +0200)]
ar71xx: add support for TP-Link RE450
Add full support for TP-Link RE450.
The wireless SoC is similiar to Archer C7: QCA9558 + QCA9880 (pci).
The ethernet interface is AR8035, but the mdio is connected to the gpio and
the chipset builtin mdio bus isn't used, which is unique (and weird), so the
kernel gpio mdio module is used.
The two ethernet leds are connected to the GPIO, so they are both configured,
one to indicate link status and the other to indicate data transfer.
The generation of the image was added to the image Makefile.
The return value of tplink-safeloader is not ignored anymore (to fail on error)
The result factory image is flashable from the stock web ui.
Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: ar71xx: RE450: do not build RE450 for nand] Signed-off-by: Radek Dostál <rd@radekdostal.com>
[hyniu@o2.pl: ar71xx: RE450: Renaming LED accordance with the standard] Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[jo@mein.io: squash fixes from Radek and Henryk into original commit] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Tal Keren [Thu, 7 Jan 2016 00:40:47 +0000 (02:40 +0200)]
firmware-utils: kernel image generator for TP-Link RE450
The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.
Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk] Signed-off-by: Radek Dostál <rd@radekdostal.com>
projects / thirdparty / openwrt.git / log
