PDP11: Use `const_double_zero' to express double zero constant
We do not define a comparison operation between floating-point and
integer data, including integer zero constant. Consequently the RTL
instruction stream presented to the post-reload comparison elimination
pass will include, where applicable, floating-point comparison insns
against `const_double:DF 0.0 [0x0.0p+0]' rather than `const_int 0 [0]',
meaning that the latter expression will not match when used in machine
description.
Use `const_double_zero' then for the relevant patterns to match the
intended RTL instructions.
gcc/
* config/pdp11/pdp11.md (fcc_cc, fcc_ccnz): Use
`const_double_zero' to express double zero constant.
The use of a constant double zero is required for post-reload compare
elimination to be able to discard redundant floating-point comparisons,
for example with a VAX RTL instruction stream like:
For this we need to express the `const_double:DF 0.0 [0x0.0p+0]' rtx as
recorded above in the relevant pattern(s) in machine description. The
way we represent double constants, as a host-dependent number of wide
integers, however means that we currently have no portable way to encode
a double zero constant in machine description.
Define a syntactic rtx alias then to represent `(const_double 0 0 ...)'
as if the suitable number of zeros have been supplied according to the
host-specific definition of CONST_DOUBLE_FORMAT.
Fix the RTL with the repeated operands and change the relevant output
operand predicates not to allow immediates.
Also emit MOVO rather than MOVH assembly instruction with the `movti'
insn so that the condition codes are set according to the integer rather
than floating-point interpretation of the datum moved, as expected with
the operation associated with the pattern.
Finally give `*amulsi4' a name, for easier reference here and elsewhere.
We may eventually want to have some of these insns enabled at `-Os'.
gcc/
* config/vax/vax.md (movti): Fix output predicate. Emit `movo'
rather than `movh'.
(divmoddisi4): Fix output predicates, correct RTL.
(*amulsi4): Name insn. Fix output predicate.
VAX: Fix predicates for widening multiply and multiply-add insns
It makes no sense for insn operand predicates, as long as they accept a
register operand, to be more restrictive than the set of the associated
constraints, because expand will choose the insn based on the relevant
operand being a pseudo register then and reload will keep it happily as
an immediate if a constraint permits it. So the restriction posed by
such a predicate will be happily ignored, and moreover if a splitter is
added, such as required for MODE_CC support, the new instructions will
reject the original operands supplied, causing an ICE like below:
.../gcc/testsuite/gfortran.dg/graphite/PR67518.f90:44:0: Error: could not split insn
(insn 90 662 663 (set (reg:DI 10 %r10 [orig:97 _235 ] [97])
(mult:DI (sign_extend:DI (mem/c:SI (plus:SI (reg/f:SI 13 %fp)
(const_int -800 [0xfffffffffffffce0])) [14 %sfp+-800 S4 A32]))
(sign_extend:DI (const_int -51 [0xffffffffffffffcd])))) 299 {mulsidi3}
(expr_list:REG_EQUAL (mult:DI (sign_extend:DI (subreg:SI (mem/c:DI (plus:SI (reg/f:SI 13 %fp)
(const_int -800 [0xfffffffffffffce0])) [14 %sfp+-800 S8 A32]) 0))
(const_int -51 [0xffffffffffffffcd]))
(nil)))
during RTL pass: final
.../gcc/testsuite/gfortran.dg/graphite/PR67518.f90:44:0: internal compiler error: in final_scan_insn_1, at final.c:3073
Please submit a full bug report,
with preprocessed source if appropriate.
See <https://gcc.gnu.org/bugs/> for instructions.
Change the predicates used with the widening multiply and multiply-add
insns to allow immediates then, just as the constraints and the machine
instructions produced permit.
Also give the insns names, for easier reference here and elsewhere.
gcc/
* config/vax/vax.md (mulsidi3): Fix the multiplicand predicates.
(*maddsidi4, *maddsidi4_const): Likewise. Name insns.
VAX: Fix predicates and constraints for bit-field comparison insns
It makes no sense for insn operand predicates, as long as they accept a
register operand, to be more restrictive than the set of the associated
constraints, because expand will choose the insn based on the relevant
operand being a pseudo register then and reload keep it happily as a
memory reference if a constraint permits it. So the restriction posed
by such a predicate will be happily ignored, and moreover if a splitter
is added, such as required for MODE_CC support, the new instructions
will reject the original operands supplied, causing an ICE. An actual
example will be given with a subsequent change.
Therefore, similarly to EXTV/EXTZV/INSV insns, remove inconsistencies
with predicates and constraints of bit-field comparison insns, observing
that a bit-field located in memory is byte-addressed by the respective
machine instructions and therefore SImode may only be used with a
register or an offsettable memory operand (i.e. not an indexed,
pre-decremented, or post-incremented one).
Also give the insns names, for easier reference here and elsewhere.
gcc/
* config/vax/vax.md (*cmpv_2): Name insn.
(*cmpv, *cmpzv, *cmpzv_2): Likewise. Fix location predicate and
constraint.
VAX: Make `extv' an expander matching the remaining bit-field operations
We have matching insns defined for `sign_extract' and `zero_extract'
expressions, so make the three named patterns for bit-field operations
consistent and make `extv' an expander rather than an insn taking a
SImode, a QImode, and a SImode general operand for the LOC, SIZE, and
POS operands respectively, like with the `extzv' and `insv' patterns,
matching the machine instructions and giving the middle end more choice
as to which actual insn to choose in a given situation.
Given this program:
typedef struct
{
int f0:1;
int f1:7;
int f8:8;
int f16:16;
} bit_t;
typedef struct
{
unsigned int f0:1;
unsigned int f1:7;
unsigned int f8:8;
unsigned int f16:16;
} ubit_t;
typedef union
{
bit_t b;
int i;
} bit_u;
typedef union
{
ubit_t b;
unsigned int i;
} ubit_u;
VAX: Ensure PIC mode address is adjustable with aligned bit-field insns
With the `*insv_aligned', `*extzv_aligned' and `*extv_aligned' insns we
are going to adjust the bit-field location if it is in memory, so only
allow such location addresses that can be offset, excluding external
symbol references in the PIC mode in particular.
This fixes an ICE like:
during RTL pass: final
In file included from .../gcc/testsuite/gcc.dg/torture/vshuf-v16qi.c:11:
.../gcc/testsuite/gcc.dg/torture/vshuf-main.inc: In function 'test_13':
.../gcc/testsuite/gcc.dg/torture/vshuf-main.inc:27:1: internal compiler error: in change_address_1, at emit-rtl.c:2275
.../gcc/testsuite/gcc.dg/torture/vshuf-16.inc:16:1: note: in expansion of macro 'T'
.../gcc/testsuite/gcc.dg/torture/vshuf-main.inc:28:1: note: in expansion of macro 'TESTS'
0x10a34b33 change_address_1
.../gcc/emit-rtl.c:2275
0x10a358af adjust_address_1(rtx_def*, machine_mode, poly_int<1u, long>, int, int, int, poly_int<1u, long>)
.../gcc/emit-rtl.c:2409
0x11d2505f output_97
.../gcc/config/vax/vax.md:806
0x10adec4b get_insn_template(int, rtx_insn*)
.../gcc/final.c:2070
0x10ae1c5b final_scan_insn_1
.../gcc/final.c:3039
0x10ae2257 final_scan_insn(rtx_insn*, _IO_FILE*, int, int, int*)
.../gcc/final.c:3152
0x10ade9a3 final_1
.../gcc/final.c:2020
0x10ae6157 rest_of_handle_final
.../gcc/final.c:4658
0x10ae6697 execute
.../gcc/final.c:4736
Please submit a full bug report,
with preprocessed source if appropriate.
Please include the complete backtrace with any bug report.
See <https://gcc.gnu.org/bugs/> for instructions.
compiler exited with status 1
FAIL: gcc.dg/torture/vshuf-v16qi.c -O2 (internal compiler error)
However expand typically presents pseudo-registers rather than memory
references to these insns, so a further rework is required to make a
better use of the code variant they are supposed to produce. This at
least fixes the problem at hand.
gcc/
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Also make sure the memory address of a bit-field
location can be adjusted in the PIC mode.
VAX: Remove EXTV/EXTZV/INSV instruction use from aligned case insns
The INSV machine instruction is the only computational operation in the
VAX ISA that keeps condition codes intact. In preparation to MODE_CC
transition keep patterns apart then that make or do not make use of said
instruction. For consistency update EXTV and EXTZV instruction uses
accordingly. In expand SUBREGs will be presented as operands, so handle
that possibility in the insn condition.
This actually yields better code by avoiding EXTV/EXTZV instructions in
pseudo-aligned register cases previously resorting to those instructions:
during RTL pass: final
.../gcc/testsuite/gcc.dg/pr83623.c: In function 'foo':
.../gcc/testsuite/gcc.dg/pr83623.c:13:1: internal compiler error: in change_address_1, at emit-rtl.c:2275
0x10a056e3 change_address_1
.../gcc/emit-rtl.c:2275
0x10a0645f adjust_address_1(rtx_def*, machine_mode, poly_int<1u, long>, int, int, int, poly_int<1u, long>)
.../gcc/emit-rtl.c:2409
0x11cb588f output_97
.../gcc/config/vax/vax.md:808
0x10aafb2f get_insn_template(int, rtx_insn*)
.../gcc/final.c:2070
0x10ab2b3f final_scan_insn_1
.../gcc/final.c:3039
0x10ab313b final_scan_insn(rtx_insn*, _IO_FILE*, int, int, int*)
.../gcc/final.c:3152
0x10aaf887 final_1
.../gcc/final.c:2020
0x10ab703b rest_of_handle_final
.../gcc/final.c:4658
0x10ab757b execute
.../gcc/final.c:4736
Please submit a full bug report,
with preprocessed source if appropriate.
Please include the complete backtrace with any bug report.
See <https://gcc.gnu.org/bugs/> for instructions.
compiler exited with status 1
FAIL: gcc.dg/pr83623.c (internal compiler error)
(where the address cannot be adjusted by 2 for PIC code as requested
here as it would create an offset external symbol reference) otherwise
caused by the patterns modified here, addressed next. This indicates
a further rework is warranted here, but at least problems at hand have
been fixed.
gcc/
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Reject register bit-field locations that are not
aligned to the least significant bit; update output statement
accordingly.
VAX: Fix predicates and constraints for EXTV/EXTZV/INSV insns
It makes no sense for insn operand predicates, as long as they accept a
register operand, to be more restrictive than the set of the associated
constraints, because expand will choose the insn based on the relevant
operand being a pseudo register then and reload keep it happily as a
memory reference if a constraint permits it. So the restriction posed
by such a predicate will be happily ignored, and moreover if a splitter
is added, such as required for MODE_CC support, the new instructions
will reject the original operands supplied, causing an ICE. An actual
example will be given with a subsequent change.
Remove such inconsistencies we have with the EXTV/EXTZV/INSV insns then,
observing that a bit-field located in memory is byte-addressed by the
respective machine instructions and therefore SImode may only be used
with a register or an offsettable memory operand (i.e. not an indexed,
pre-decremented, or post-incremented one), which has already been taken
into account with the constraints currently used, except for `*insv_2'.
The QI machine mode may be used for the bit-field location with any kind
of memory operand, but we got the constraint wrong, although harmlessly
in reality, with `*insv'. Fix that for consistency though.
Also give the insns names, for easier reference here and elsewhere.
gcc/
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned, *extv_non_const, *extzv_non_const): Name insns.
Fix location predicate.
(*extzv): Name insn.
(*insv): Likewise. Fix location constraint.
(*insv_2): Likewise, and the predicate.
VAX: Actually produce QImode and HImode `ctz' operations
The middle end does not refer to `ctzqi2'/`ctzhi2' or `ffsqi2'/`ffshi2'
patterns by name where `__builtin_ctz' or `__builtin_ffs' respectively
is invoked for an argument of the QImode or HImode type, and instead it
extends the data type before passing it to `ctzsi2' or `ffssi2'.
Avoid the redundant operation and use a peephole2 to convert it to the
right RTL expression that will collapse the two operations into a single
machine instruction instead unless we need the extended intermediate
result for another purpose.
gcc/
* config/vax/builtins.md: Add a peephole2 for QImode and HImode
`ctz' operations.
(any_extend): New code iterator.
gcc/testsuite/
* gcc.target/vax/ctzhi.c: New test.
* gcc.target/vax/ctzqi.c: New test.
* gcc.target/vax/ffshi.c: New test.
* gcc.target/vax/ffsqi.c: New test.
VAX: Also provide QImode and HImode `ctz' and `ffs' operations
The FFS machine instruction provides for arbitrary input bit-field widths
so take advantage of this and convert `ffssi2' and `ctzsi2' to templates
for all the three of QI, HI, SI machine modes.
Our `ffssi2_internal' pattern and the machine FFS instruction, which
technically is a bit-field operation, match the `ctz' operation exactly,
with the result produced for the bit-field source operand of zero equal
to its width as specified with another machine instruction operand, not
directly expressed in RTL and currently hardcoded in the assembly code
produced. In our terms this is the bit size of the machine mode used,
and although it's SImode now let's be flexible for an upcoming change.
The operation also sets the Z condition code according to the value of
the source operand.
caused by a volatile memory reference used that is not accepted by the
`memory_operand' predicate of the `jbbssiqi' insn explicitly referred
from the `sync_lock_test_and_setqi' expander. Also seen with:
FAIL: gcc.dg/pr61756.c (internal compiler error)
Define a new `any_memory_operand' predicate accepting both ordinary and
volatile memory references and use it with the `jbb<ccss>i<mode>' insn,
so as to address the ICE.
Also remove useless operations from the `sync_lock_test_and_set<mode>'
and `sync_lock_release<mode>' expanders as those always either complete
or fail and therefore never fall through to using their template other
than to match operands. Wrap `jbb<ccss>i<mode>' into `unspec_volatile'
instead so that the jump does not get removed or reordered. Share one
index to avoid a complication around the iterators since the index is
nowhere referred to anyway and the pattern required pulled by its name.
Test cases will be added separately.
gcc/
* config/vax/predicates.md (volatile_mem_operand)
(any_memory_operand): New predicates.
* config/vax/builtins.md (VUNSPEC_UNLOCK): Remove constant.
(sync_lock_test_and_set<mode>): Remove `set' and `unspec'
operations, match operands only. Reformat.
(sync_lock_release<mode>): Likewise. Remove cruft.
(jbb<ccss>i<mode>): Wrap into `unspec_volatile', use
`any_memory_operand' predicate.
VAX: Use an int iterator to produce individual interlocked branches
With mode-specific interlocked branch insns already folded into iterated
templates now fold the two templates into one too, observing that the
only difference between them is the value of the bit branched on, which
is of course reflected both in the RTL expression and the instruction
produced. Use an int iterator to iterate over the bit value, making use
of the newly-added wide integer support, and substituting patterns as
necessary to produce equivalent individual insns. No functional change.
gcc/
* config/vax/builtins.md (bit): New int iterator.
(ccss): New int attribute.
(jbbssi<mode>, jbbcci<mode>): Fold insns into...
(jbb<ccss>i<mode>): ... this.
VAX: Use a mode iterator to produce individual interlocked branches
Regardless of the machine mode all the interlocked branches of the same
kind, one of the two provided by the ISA, use the same RTL patterns and
machine instructions, except for the memory operand's constraint.
Remove code duplication then and make use of a mode iterator combined
with an attribute to expand the same insn patterns with the constraint
suitably substituted from a single template. No functional change.
jump: Also handle jumps wrapped in UNSPEC or UNSPEC_VOLATILE
VAX has interlocked branch instructions used for atomic operations and
we want to have them wrapped in UNSPEC_VOLATILE so as not to have code
carried across. This however breaks with jump optimization and leads
to an ICE in the build of libbacktrace like:
when those branches are enabled with a follow-up change. Also showing
with:
FAIL: gcc.dg/pr61756.c (internal compiler error)
Handle branches wrapped in UNSPEC_VOLATILE then and, for consistency,
also in UNSPEC. The presence of UNSPEC_VOLATILE will prevent such
branches from being removed as they won't be accepted by `onlyjump_p',
we just need to let them through.
gcc/
* jump.c (pc_set): Also accept a jump wrapped in UNSPEC or
UNSPEC_VOLATILE.
(any_uncondjump_p, any_condjump_p): Update comment accordingly.
Ignore jumps that have side effects in loop processing as pasting the
body of a loop multiple times within is semantically equivalent to jump
deletion (between the iterations unrolled) even if we do not physically
delete the jump RTL insn.
gcc/
* loop-iv.c (simplify_using_initial_values): Only process jumps
that match `onlyjump_p'.
(check_simple_exit): Likewise.
RTL: Also support HOST_WIDE_INT with int iterators
Add wide integer aka 'w' rtx format support to int iterators so that
machine description can iterate over `const_int' expressions.
This is made by expanding standard integer aka 'i' format support,
observing that any standard integer already present in any of our
existing RTL code will also fit into HOST_WIDE_INT, so there is no need
for a separate handler. Any truncation of the number parsed is made by
the caller. An assumption is made however that no place relies on
capping out of range values to INT_MAX.
Now the 'p' format is handled explicitly rather than being implied by
rtx being a SUBREG, so actually assert that it is, just to play safe.
gcc/
* read-rtl.c: Add a page-feed separator at the start of iterator
code.
(struct iterator_group): Change the return type to HOST_WIDE_INT
for the `find_builtin' member. Likewise the second parameter
type for the `apply_iterator' member.
(atoll) [!HAVE_ATOQ]: Reorder.
(find_mode, find_code): Change the return type to HOST_WIDE_INT.
(apply_mode_iterator, apply_code_iterator)
(apply_subst_iterator): Change the second parameter type to
HOST_WIDE_INT.
(find_int): Handle input suitable for HOST_WIDE_INT output.
(apply_int_iterator): Rewrite in terms of explicit format
interpretation.
(rtx_reader::read_rtx_operand) <'w'>: Fold into...
<'i', 'n', 'p'>: ... this.
* doc/md.texi (Int Iterators): Document 'w' rtx format support.
The `builtins.md' machine description fragment is not included anywhere
and is therefore dead code, which has become bitrotten due to non-use.
If actually enabled, it does not build due to the use of an unknown `t'
constraint:
.../gcc/config/vax/builtins.md:42:1: error: undefined machine-specific constraint at this point: "t"
.../gcc/config/vax/builtins.md:42:1: note: in operand 1
which came from commit becb93d02cc1 ("builtins.md (ffssi2_internal):
Correct constraint."), which was not applied as posted and reviewed; `T'
was meant to be used instead.
Once this has been fixed this code still fails building:
.../gcc/config/vax/builtins.md: In function 'rtx_def* gen_ffssi2(rtx, rtx)':
.../gcc/config/vax/builtins.md:35:19: error: 'gen_bne' was not declared in this
scope; did you mean 'gen_use'?
35 | emit_jump_insn (gen_bne (label));
| ^~~~~~~
| gen_use
make[2]: *** [Makefile:1122: insn-emit.o] Error 1
Finally the FFS machine instruction sets the Z condition code according
to the comparison of the value held in the source operand against zero
rather than the value held in the target operand. If the source operand
is found hold zero, then the target operand is set to the width of the
source operand, 32 for SImode (FFS supports arbitrary widths).
Correct the build issues then and update RTL to match the operation of
the machine instruction. A test case will be added separately.
gcc/
* config/vax/builtins.md (ffssi2): Make preparation statements
actually buildable.
(ffssi2_internal): Fix input constraints; make the RTL pattern
match reality for `cc0'.
Expression costs are required to be given in terms of COSTS_N_INSNS (n),
which is defined to stand for the count of single fast instructions, and
actually returns `n * 4'. The VAX backend however instead operates on
naked numbers, causing an anomaly for the integer const zero rtx, where
the cost given is 4 as opposed to 1 for integers in the [1:63] range, as
well as -1 for comparisons. This is because the value of 0 returned by
`vax_rtx_costs' is converted to COSTS_N_INSNS (1) in `pattern_cost':
return cost > 0 ? cost : COSTS_N_INSNS (1);
Consequently, where feasible, 1 or -1 are preferred over 0 by the middle
end causing code pessimization, e.g. rather than producing this:
subl2 $4,%sp
movl 4(%ap),%r0
jgtr .L2
addl2 $2,%r0
.L2:
ret
or this:
subl2 $4,%sp
addl3 4(%ap),8(%ap),%r0
jlss .L6
addl2 $2,%r0
.L6:
ret
int
compare_mov (int x)
{
if (x > 0)
return x;
else
return x + 2;
}
and this:
int
compare_add (int x, int y)
{
int z;
z = x + y;
if (z < 0)
return z;
else
return z + 2;
}
respectively, which is slower and larger both at a time.
Furthermore once the backend is converted to MODE_CC this anomaly makes
it usually impossible to remove redundant comparisons in the comparison
elimination pass, because most VAX instructions set the condition codes
as per the relation of the instruction's result to 0 and not -1.
The middle end has some other assumptions as to rtx costs being given in
terms of COSTS_N_INSNS, so wrap all the VAX rtx costs then as they stand
into COSTS_N_INSNS invocations, effectively scaling the costs by 4 while
preserving their relative values, except for the integer const zero rtx
given the value of `COSTS_N_INSNS (1) / 2', half of a fast instruction
(this can be further halved if needed in the future).
Adjust address costs likewise so that they remain proportional to the
new absolute values of rtx costs.
Code size stats are as follows, collected from 17639 executables built
in `check-c' GCC testing:
samples average median
--------------------------------------
regressions 1420 0.400% 0.195%
unchanged 13811 0.000% 0.000%
progressions 2408 -0.504% -0.201%
--------------------------------------
total 17639 -0.037% 0.000%
with a small number of outliers only (over 5% size change):
and is clearly better: not only it is smaller, but it also uses the
post-increment rather than indexed addressing mode in the loop, of
which the former comes for free in terms of both performance and code
size while the latter causes an extra byte per operand to be produced
for the index register and also incurs an execution penalty for the
extra address calculation.
Exclude the case from VAX testing then, as already done for some other
targets and discussed with commit d242fdaec186 ("gcc.dg/loop-8.c: Skip
for mmix.").
gcc/
* config/vax/vax.c (vax_address_cost): Express the cost in terms
of COSTS_N_INSNS.
(vax_rtx_costs): Likewise.
gcc/testsuite/
* gcc.dg/loop-8.c: Exclude for `vax-*-*'.
* gcc.target/vax/compare-add-zero.c: New test.
* gcc.target/vax/compare-mov-zero.c: New test.
VAX/testsuite: Run target testing over all the usual optimization levels
It makes sense to use what other targets do and run all the VAX test
cases over all the usual optimization levels, so make `vax.exp' use our
`gcc-dg-runtest' rather than the generic `dg-runtest' test driver.
This breaks `pr56875.c' however, which is optimized away at levels above
`-O0' as a result of how it has been written for calculations to make no
effect:
Rather than keeping it at `-O0' update the test case for its code to do
make effect while retaining its sense. Also reformat it according to
our requirements.
gcc/testsuite/
* gcc.target/vax/vax.exp: Use `gcc-dg-runtest' rather than
`dg-runtest'.
* gcc.target/vax/pr56875.c (dg-options): Make empty.
(a): Rewrite for calculations to make effect. Reformat.
The VAX ELF psABI does not permit the use of all hardware operand modes
for PIC symbol references due to the need to use PC-relative addressing
for symbols that end up local and the need to make references indirect
symbols that end up global.
Therefore symbols referred as immediates may only be used with the move
and push address (MOVA and PUSHA) instructions and their PC-relative
displacement address mode, as there is no genuine PC-relative immediate
available that all the other instructions would have to use.
Furthermore global symbol references must not have an offset applied,
which has to be added with a separate instruction, because there is no
support now for GOT entries for external `symbol+offset' references, so
any indirect GOT references made by the static linker from the original
direct symbol references must not have an addend applied. Consequently
no addend is allowed even if a given external symbol turns out local,
for whatever reason, at the static link time.
Define the LEGITIMATE_PIC_OPERAND_P macro then, a corresponding function
and predicate to exclude the relevant expressions as required, and then
a constraint so that reloads are produced where needed, and use the new
facilities in the machine description, folding corresponding duplicated
patterns for local and external symbols together. Rewrite predicates to
make use of the new function, rename them to match their sense and also
remove ones no longer used.
All this fixing an ICE like this:
during RTL pass: postreload
.../gcc/testsuite/gcc.c-torture/execute/20040709-2.c: In function 'testE':
.../gcc/testsuite/gcc.c-torture/execute/20040709-2.c:89:1: internal compiler error: in reload_combine_note_use, at postreload.c:1559
.../gcc/testsuite/gcc.c-torture/execute/20040709-2.c:96:65: note: in expansion of macro 'T'
0x10fe84cb reload_combine_note_use
.../gcc/postreload.c:1559
0x10fe8857 reload_combine_note_use
.../gcc/postreload.c:1621
0x10fe8303 reload_combine_note_use
.../gcc/postreload.c:1517
0x10fe7c7b reload_combine
.../gcc/postreload.c:1408
0x10fe3417 reload_cse_regs
.../gcc/postreload.c:67
0x10feaf9f execute
.../gcc/postreload.c:2358
due to the presence of a pseudo register post-reload:
gcc/
* config/vax/constraints.md (A): New constraint.
* config/vax/predicates.md (external_symbolic_operand)
(external_const_operand): Remove predicates.
(local_symbolic_operand): Rename to...
(pic_symbolic_operand): ... this, and rework.
(external_memory_operand): Rename to...
(non_pic_external_memory_operand): ... this, and rework.
(illegal_blk_memory_operand, illegal_addsub_di_memory_operand):
Update accordingly.
* config/vax/vax-protos.h (vax_acceptable_pic_operand_p): New
prototype.
* config/vax/vax.c (vax_acceptable_pic_operand_p): New function.
(vax_output_int_add): Update according to predicate rework.
* config/vax/vax.h (LEGITIMATE_PIC_OPERAND_P): New macro.
* config/vax/vax.md (pushlclsymreg, pushextsymreg): Fold
together, and rename to...
(*pushsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(movlclsymreg, movextsymreg): Fold together, and rename to...
(*movsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(pushextsym, pushlclsym): Fold together, and rename to...
(*pushsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
(movextsym, movlclsym): Fold together, and rename to...
(*movsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
The `c' operand format specifier is handled directly by the middle end
in `output_asm_insn':
%cN means require operand N to be a constant
and print the constant expression with no punctuation.
however it resorts to the target for constants that are not valid
addresses:
else if (letter == 'c')
{
if (CONSTANT_ADDRESS_P (operands[opnum]))
output_addr_const (asm_out_file, operands[opnum]);
else
output_operand (operands[opnum], 'c');
}
The VAX backend expects the fallback never to happen and overloads `c'
with the branch condition code. This is confusing however and it is not
like we are short of letters, so instead make the branch condition code
use `k', and then for consistency make `K' the reverse branch condition
code format specifier. This is safe to do as we provide no means to use
a computed branch condition code in user `asm'.
gcc/
* config/vax/vax.c (print_operand): Replace `c' and `C' with
`k' and `K' respectively.
* config/vax/vax.md (*branch, *branch_reversed): Update
accordingly.
in a `vax-netbsdelf' build, where an attempt is made to change the mode
of the contained memory reference to the mode of the containing SUBREG.
Such RTL expressions are produced by the VAX shift and rotate patterns
(`ashift', `ashiftrt', `rotate', `rotatert') where the count operand
always has the QI mode regardless of the mode, either SI or DI, of the
datum shifted or rotated.
Such a mode change cannot work where the memory reference uses the
indexed addressing mode, where a multiplier is implied that in the VAX
ISA depends on the width of the memory access requested and therefore
changing the machine mode would change the address calculation as well.
Avoid the attempt then by forcing the reload of any SUBREGs containing
a mode-dependent memory reference, also fixing these regressions:
First posted at: <https://gcc.gnu.org/ml/gcc/2014-06/msg00060.html>.
2020-12-05 Matt Thomas <matt@3am-software.com>
Maciej W. Rozycki <macro@linux-mips.org>
gcc/
PR target/58901
* reload.c (push_reload): Also reload the inner expression of a
SUBREG for pseudos associated with a mode-dependent memory
reference.
(find_reloads): Force a reload likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
gcc/testsuite/
PR target/58901
* gcc.c-torture/compile/pr58901-0.c: New test.
* gcc.c-torture/compile/pr58901-1.c: New test.
Roman Zhuykov [Sat, 5 Dec 2020 15:45:27 +0000 (18:45 +0300)]
modulo-sched: Carefully process loop counter initialization [PR97421]
Do not allow direct adjustment of pre-header initialization instruction for
count register if is read in some instruction below in that basic block.
gcc/ChangeLog:
PR rtl-optimization/97421
* modulo-sched.c (generate_prolog_epilog): Remove forward
declaration, adjust last argument name and type.
(const_iteration_count): Add bool pointer parameter to return
whether count register is read in pre-header after its
initialization.
(sms_schedule): Fix count register initialization adjustment
procedure according to what const_iteration_count said.
gcc/testsuite/ChangeLog:
PR rtl-optimization/97421
* gcc.c-torture/execute/pr97421-1.c: New test.
* gcc.c-torture/execute/pr97421-2.c: New test.
* gcc.c-torture/execute/pr97421-3.c: New test.
Iain Sandoe [Wed, 18 Nov 2020 10:06:03 +0000 (10:06 +0000)]
Darwin : Update libtool and dependencies for Darwin20 [PR97865]
The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
Jakub Jelinek [Sat, 5 Dec 2020 00:31:08 +0000 (01:31 +0100)]
i386: Combine splitters followup [PR96226]
Here is the patch to simplify the newly added combine splitters,
when we split into 2 insns anyway, no reason to split into the masking
define_insn_and_split we'd be splitting shortly after.
2020-12-05 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): Drop the masking from
the patterns to split into.
Jakub Jelinek [Sat, 5 Dec 2020 00:30:08 +0000 (01:30 +0100)]
c++: Fix constexpr access to union member through pointer-to-member [PR98122]
We currently incorrectly reject the first testcase, because
cxx_fold_indirect_ref_1 doesn't attempt to handle UNION_TYPEs.
As the second testcase shows, it isn't that easy, because I believe we need
to take into account the active member and prefer that active member over
other members, because if we pick a non-active one, we might reject valid
programs.
2020-12-05 Jakub Jelinek <jakub@redhat.com>
PR c++/98122
* constexpr.c (cxx_union_active_member): New function.
(cxx_fold_indirect_ref_1): Add ctx argument, pass it through to
recursive call. Handle UNION_TYPE.
(cxx_fold_indirect_ref): Add ctx argument, pass it to recursive calls
and cxx_fold_indirect_ref_1.
(cxx_eval_indirect_ref): Adjust cxx_fold_indirect_ref calls.
* g++.dg/cpp1y/constexpr-98122.C: New test.
* g++.dg/cpp2a/constexpr-98122.C: New test.
runtime: update type descriptor name in fieldtrack C support code
We were using the old name, but nothing noticed because it is a weak
reference that is permitted to be nil, so that it works with code that
does not use the field tracking library.
Jason Merrill [Wed, 25 Nov 2020 22:05:24 +0000 (17:05 -0500)]
c++: Fix deduction from auto template parameter [PR93083]
The check in do_class_deduction to handle passing one class placeholder
template parm as an argument for itself needed to be extended to also handle
equivalent parms from other templates.
Jason Merrill [Wed, 2 Dec 2020 22:11:33 +0000 (17:11 -0500)]
vec: Simplify use with C++11 range-based 'for'.
It looks cleaner if we can use a vec* directly as a range for the C++11
range-based 'for' loop, without needing to indirect from it, and also works
with null pointers.
The change in cp_parser_late_parsing_default_args is an example of how this
can be used to simplify a simple loop over a vector. Reverse or subset
iteration will require adding range adaptors.
I deliberately didn't format the new overloads for etags since they are
trivial.
David Edelsohn [Fri, 4 Dec 2020 19:29:46 +0000 (14:29 -0500)]
rs6000: fix PTR_SIZE in rs6000.c
The recent change to rs6000.c for DWARF in AIX references the macro
PTR_SIZE that only is defined in dwarf2out.c. This patch changes the
reference to the equivalent POINTER_SIZE_UNITS defined in defaults.h.
gcc/ChangeLog:
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Change PTR_SIZE to POINTER_SIZE_UNITS.
doc/implement-c.texi: About same-as-scalar-type volatile aggregate accesses, PR94600
We say very little about reads and writes to aggregate /
compound objects, just scalar objects (i.e. assignments don't
cause reads). Let's lets say something safe about aggregate
objects, but only for those that are the same size as a scalar
type.
There's an equal-sounding section (Volatiles) in extend.texi,
but this seems a more appropriate place, as specifying the
behavior of a standard qualifier.
gcc:
2020-12-04 Hans-Peter Nilsson <hp@axis.com>
Martin Sebor <msebor@redhat.com>
PR middle-end/94600
* doc/implement-c.texi (Qualifiers implementation): Add blurb
about access to the whole of a volatile aggregate object, only for
same-size as a scalar object.
Jakub Jelinek [Fri, 4 Dec 2020 18:10:56 +0000 (19:10 +0100)]
gimple: Return fnspec only for replaceable new/delete operators called from new/delete [PR98130]
As mentioned in the PR, we shouldn't treat non-replaceable operator
new/delete (e.g. with the placement new) as replaceable ones.
There is some pending discussion that perhaps operator delete called from
delete if not replaceable should return some other fnspec, but can we handle
that incrementally, fix this wrong-code and then deal with a missed
optimization? I really don't know what exactly should be returned.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR c++/98130
* gimple.c (gimple_call_fnspec): Only return ".co " for replaceable
operator delete or ".mC" for replaceable operator new called from
new/delete.
As mentioned in the PR, we can combine ~(1 << x) into -2 r<< x, but we give
up in the ~(1 << (x & 31)) cases, as *<rotate_insn><mode>3_mask* don't allow
immediate operand 1 and find_split_point prefers to split (x & 31) instead
of the constant.
With these combine splitters we help combine decide how to split those
insns.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): New combine splitters.
Jakub Jelinek [Fri, 4 Dec 2020 17:00:54 +0000 (18:00 +0100)]
fold-const: Don't use build_constructor for non-aggregate types in native_encode_initializer [PR93121]
The following testcase is rejected, because when trying to encode a zeroing
CONSTRUCTOR, the code was using build_constructor to build initializers for
the elements but when recursing the function handles CONSTRUCTOR only for
aggregate types.
The following patch fixes that by using build_zero_cst instead for
non-aggregates. Another option would be add handling CONSTRUCTOR for
non-aggregates in native_encode_initializer. Or we can do both, I guess
the middle-end generally doesn't like CONSTRUCTORs for scalar variables, but
am not 100% sure if the FE doesn't produce those sometimes.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.c (native_encode_initializer): Use build_zero_cst
instead of build_constructor.
Nathan Sidwell [Fri, 4 Dec 2020 16:34:41 +0000 (08:34 -0800)]
c++: Revert dependent-array changes [PR 98116]
The changes reverted here are exposing an existing problem with alias
template comparisons. The typename_type changes are also incomplete,
possibly for similar reasons. It seems safer to revert them, fix the
underlying issue and then move forwards.
The testcases is adjusted to more robustly check the specialization
table, and ICEs with and without the c++ changes.
Revert: 62fb1b9e0da c++: Fix array type dependency [PR 98107] 07589ca2b2c c++: typename_type structural comparison 29ae1d7751 c++: Extend build_array_type API
Jakub Jelinek [Fri, 4 Dec 2020 11:18:21 +0000 (12:18 +0100)]
debug: Fix another vector DECL_MODE ICE [PR98100]
The PR88587 fix changes DECL_MODE of vars with vector type during inlining/cloning
when the vars are copied, so that their DECL_MODE matches their TYPE_MODE in
the new function. Unfortunately, the following testcase still ICEs, the var
isn't really used in the new function and so it isn't copied, but becomes
just a nonlocalized var. So we can't adjust its DECL_MODE because it
appears in multiple functions and needs different modes in between them.
The following patch changes the DEBUG_INSN creation to use TYPE_MODE instead
of DECL_MODE for vars with vector types.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/98100
* cfgexpand.c (expand_gimple_basic_block): For vars with
vector type, use TYPE_MODE rather than DECL_MODE.
Jakub Jelinek [Fri, 4 Dec 2020 09:54:45 +0000 (10:54 +0100)]
dwarf: Add -gdwarf{32,64} options
The following patch makes the choice between 32-bit and 64-bit DWARF formats
selectable by command line switch, rather than being hardcoded through
DWARF_OFFSET_SIZE macro.
The options themselves don't turn on debug info themselves, so one needs
to use -g -gdwarf64 or similar.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
* common.opt (-gdwarf32, -gdwarf64): New options.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Default
dwarf_offset_size to 8 if not overridden from the command line.
* dwarf2out.c: Change all occurrences of DWARF_OFFSET_SIZE to
dwarf_offset_size.
* doc/invoke.texi (-gdwarf32, -gdwarf64): Document.
Martin Liska [Fri, 4 Dec 2020 09:43:51 +0000 (10:43 +0100)]
testsuite: use param for if-to-switch tests
gcc/testsuite/ChangeLog:
PR testsuite/98123
* gcc.dg/tree-ssa/if-to-switch-4.c: Add param to make the test
stable on all architectures.
* gcc.dg/tree-ssa/if-to-switch-6.c: Likewise.
* gcc.dg/tree-ssa/if-to-switch-8.c: Likewise.
Martin Liska [Mon, 23 Nov 2020 12:40:04 +0000 (13:40 +0100)]
Refactor -frecord-gcc-switches.
gcc/ChangeLog:
* doc/tm.texi: Change argument of the record_gcc_switches
hook and remove SWITCH_TYPE_* enum values.
* dwarf2out.c (gen_producer_string): Move to opts.c and remove
handling of the dwarf_record_gcc_switches option.
(dwarf2out_early_finish): Use moved gen_producer_string
function.
* opts.c (gen_producer_string): New.
* opts.h (gen_producer_string): New.
* target.def: Change type of record_gcc_switches.
* target.h (enum print_switch_type): Remove.
(elf_record_gcc_switches): Change first argument.
* toplev.c (MAX_LINE): Remove.
(print_to_asm_out_file): Likewise.
(print_to_stderr): Likewise.
(print_single_switch): Likewise.
(print_switch_values): Likewise.
(init_asm_output): Use new gen_producer_string function.
(process_options): Likewise.
* varasm.c (elf_record_gcc_switches): Just save the string argument
to the ELF container.
Eric Botcazou [Fri, 4 Dec 2020 09:04:56 +0000 (10:04 +0100)]
Fix checking failure in IPA-SRA
This is a regression present on the mainline and 10 branch: on the one
hand, IPA-SRA does *not* disqualify accesses with zero size but, on the
other hand, it checks that accesses present in the tree have a (strictly)
positive size, thus trivially yielding an ICE in some cases.
gcc/ChangeLog:
* ipa-sra.c (verify_access_tree_1): Relax assertion on the size.
gcc/testsuite/ChangeLog:
* gnat.dg/opt91.ads, gnat.dg/opt91.adb: New test.
* gnat.dg/opt91_pkg.ads, gnat.dg/opt91_pkg.adb: New helper.
Jakub Jelinek [Fri, 4 Dec 2020 07:08:39 +0000 (08:08 +0100)]
c++: Change __builtin_source_location to use __PRETTY_FUNCTION__ instead of __FUNCTION__ [PR80780]
On Tue, Dec 01, 2020 at 01:03:52PM +0000, Jonathan Wakely via Gcc-patches wrote:
> I mentioned in PR 80780 that a __builtin__PRETTY_FUNCTION would have
> been nice, because __FUNCTION__ isn't very useful for C++, because of
> overloading and namespace/class scopes. There are an unlimited number
> of functions that have __FUNCTION__ == "s", e.g. "ns::s(int)" and
> "ns::s()" and "another_scope::s::s<T...>(T...)" etc.
>
> Since __builtin_source_location() can do whatever it wants (without
> needing to add __builtin__PRETTY_FUNCTION) it might be nice to use the
> __PRETTY_FUNCTION__ string. JeanHeyd's tests would still need changes,
> because the name would be "s::s(void*)" not "s::s" but that still
> seems better for users.
When I've added template tests for the previous patch, I have noticed that
the current __builtin_source_location behavior is not really __FUNCTION__,
just close, because e.g. in function template __FUNCTION__ is still
"bar" but __builtin_source_location gave "bar<0>".
Anyway, this patch implements above request to follow __PRETTY_FUNCTION__
(on top of the earlier posted patch).
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR c++/80780
* cp-gimplify.c (fold_builtin_source_location): Use 2 instead of 0
as last argument to cxx_printable_name.
Jason Merrill [Thu, 3 Dec 2020 21:38:19 +0000 (16:38 -0500)]
c++: Fix bootstrap on 32-bit hosts [PR91828]
Using the releasing_vec op[] with an int index was breaking on 32-bit hosts
because of ambiguity with the built-in operator and the conversion
function. Since the built-in operator has a ptrdiff_t, this was fine on
64-bit targets where ptrdiff_t is larger than int, but broke on 32-bit
targets where it's the same as int, making the conversion for that argument
better than the member function. Fixed by changing the member function to
also use ptrdiff_t for the index.
gcc/cp/ChangeLog:
* cp-tree.h (releasing_vec::operator[]): Change parameter type to
ptrdiff_t.
Martin Sebor [Thu, 3 Dec 2020 22:41:25 +0000 (15:41 -0700)]
Add support for detecting mismatched allocation/deallocation calls.
PR c++/90629 - Support for -Wmismatched-new-delete
PR middle-end/94527 - Add an __attribute__ that marks a function as freeing an object
gcc/ChangeLog:
PR c++/90629
PR middle-end/94527
* builtins.c (access_ref::access_ref): Initialize new member.
(compute_objsize): Use access_ref::deref. Handle simple pointer
assignment.
(expand_builtin): Remove handling of the free built-in.
(call_dealloc_argno): Same.
(find_assignment_location): New function.
(fndecl_alloc_p): Same.
(gimple_call_alloc_p): Same.
(call_dealloc_p): Same.
(matching_alloc_calls_p): Same.
(warn_dealloc_offset): Same.
(maybe_emit_free_warning): Same.
* builtins.h (struct access_ref): Declare new member.
(maybe_emit_free_warning): Make extern. Make use of access_ref.
Handle -Wmismatched-new-delete.
* calls.c (initialize_argument_information): Call
maybe_emit_free_warning.
* doc/extend.texi (attribute malloc): Update.
* doc/invoke.texi (-Wfree-nonheap-object): Expand documentation.
(-Wmismatched-new-delete): Document new option.
(-Wmismatched-dealloc): Document new option.
gcc/c-family/ChangeLog:
PR c++/90629
PR middle-end/94527
* c-attribs.c (handle_dealloc_attribute): New function.
(handle_malloc_attribute): Handle argument forms of attribute.
* c.opt (-Wmismatched-dealloc): New option.
(-Wmismatched-new-delete): New option.
gcc/testsuite/ChangeLog:
PR c++/90629
PR middle-end/94527
* g++.dg/asan/asan_test.cc: Fix a bug.
* g++.dg/warn/delete-array-1.C: Add expected warning.
* g++.old-deja/g++.other/delete2.C: Add expected warning.
* g++.dg/warn/Wfree-nonheap-object-2.C: New test.
* g++.dg/warn/Wfree-nonheap-object.C: New test.
* g++.dg/warn/Wmismatched-new-delete.C: New test.
* g++.dg/warn/Wmismatched-dealloc-2.C: New test.
* g++.dg/warn/Wmismatched-dealloc.C: New test.
* gcc.dg/Wmismatched-dealloc.c: New test.
* gcc.dg/analyzer/malloc-1.c: Prune out expected warning.
* gcc.dg/attr-malloc.c: New test.
* gcc.dg/free-1.c: Adjust text of expected warning.
* gcc.dg/free-2.c: Same.
* gcc.dg/torture/pr71816.c: Prune out expected warning.
* gcc.dg/tree-ssa/pr19831-2.c: Add an expected warning.
* gcc.dg/Wfree-nonheap-object-2.c: New test.
* gcc.dg/Wfree-nonheap-object-3.c: New test.
* gcc.dg/Wfree-nonheap-object.c: New test.
libstdc++-v3/ChangeLog:
* testsuite/ext/vstring/modifiers/clear/56166.cc: Suppress a false
positive warning.
Nathan Sidwell [Thu, 3 Dec 2020 20:38:15 +0000 (12:38 -0800)]
c++: Exported using decls
With modules we need to record whethe a (namespace-scope) using decl
is exporting the named entities. Record this on the OVERLOAD marking
the used decl.
gcc/cp/
* cp-tree.h (OVL_EXPORT): New.
(class ovl_iterator): Add get_using, exporting_p.
* tree.c (ovl_insert): Extend using_or_hidden meaning to include
an exported using.
Nathan Sidwell [Thu, 3 Dec 2020 19:12:08 +0000 (11:12 -0800)]
c++: uninstantiated template friends
template friends need to be recognized by module streaming and
associated with the befriending class. but their context is that of
the friend (a namespace or other class). This adds a flag to mark
such templates, and uses their DECL_CHAIN to point at the befriender.
gcc/cp
* cp-tree.h (DECL_UNINSTANTIATED_TEMPLATE_FRIEND): New.
* pt.c (push_template_decl): Set it.
(tsubst_friend_function): Clear it.
PowerPC: PR libgcc/97543 and libgcc/97643, fix long double issues
If you use a compiler with long double defaulting to 64-bit instead of 128-bit
with IBM extended double, you get linker warnings about mis-matches in the gnu
attributes for long double (PR libgcc/97543). Even if the compiler is
configured to have long double be 64 bit as the default with the configuration
option '--without-long-double-128' you get the warnings.
You also get the same issues if you use a compiler with long double defaulting
to IEEE 128-bit instead of IBM extended double (PR libgcc/97643).
The issue is the way libgcc.a/libgcc.so is built. Right now when building
libgcc under Linux, the long double size is set to 128-bits when building
libgcc. However, the gnu attributes are set, leading to the warnings.
One feature of the current GNU attribute implementation is if you have a shared
library (such as libgcc_s.so), the GNU attributes for the shared library is an
inclusive OR of all of the objects within the library. This means if any
object file that uses the -mlong-double-128 option and uses long double, the GNU
attributes for the library will indicate that it uses 128-bit IBM long
doubles. If you have a static library, you will get the warning only if you
actually reference an object file with the attribute set.
This patch does two things:
1) All of the object files that support IBM 128-bit long doubles
explicitly set the ABI to IBM extended double.
2) I turned off GNU attributes for building the shared library or for
building the IBM 128-bit long double support.
libgcc/
2020-12-03 Michael Meissner <meissner@linux.ibm.com>
PR libgcc/97543
PR libgcc/97643
* config/rs6000/t-linux (IBM128_STATIC_OBJS): New make variable.
(IBM128_SHARED_OBJS): New make variable.
(IBM128_OBJS): New make variable. Set all objects to use the
explicit IBM format, and disable gnu attributes.
(IBM128_CFLAGS): New make variable.
(gcc_s_compile): Add -mno-gnu-attribute to all shared library
modules.
Alexandre Oliva [Thu, 3 Dec 2020 19:20:28 +0000 (16:20 -0300)]
fix __builtin___clear_cache overrider fallout
Machines that had CLEAR_CACHE_INSN and that would thus issue calls to
__clear_cache with the default call expander, would fail on languages
that did not set up the __clear_cache builtin. This patch arranges
for all languages to set up this builtin.
Machines or multilibs that had ptr_mode != Pmode, such as aarch64 with
-mabi=ilp32, would fail the RTL mode test of the arguments passed to
__clear_cache, because we'd insist on ptr_mode. This patch arranges
for Pmode to be accepted as well.
for gcc/ChangeLog
* tree.c (build_common_builtin_nodes): Declare
__builtin___clear_cache for all languages.
* builtins.c (maybe_emit_call_builtin___clear_cache): Accept
Pmode arguments.
This doesn't define a new _GLIBCXX_HAVE_BUILTIN_SOURCE_LOCATION macro.
because using __has_builtin(__builtin_source_location) is sufficient.
Currently only GCC supports it, but if/when Clang and Intel add it the
__has_builtin check should for them too.
Co-authored-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* doc/doxygen/user.cfg.in (INPUT): Add <source_location>.
* include/Makefile.am: Add <source_location>.
* include/Makefile.in: Regenerate.
* include/std/version (__cpp_lib_source_location): Define.
* include/std/source_location: New file.
* testsuite/18_support/source_location/1.cc: New test.
* testsuite/18_support/source_location/consteval.cc: New test.
* testsuite/18_support/source_location/srcloc.h: New test.
* testsuite/18_support/source_location/version.cc: New test.
Jonathan Wakely [Thu, 3 Dec 2020 19:17:13 +0000 (19:17 +0000)]
libstdc++: Add std::bit_cast for C++20 [PR 93121]
Thanks to Jakub's addition of the built-in, we can add this to the
library now. The compiler tests for the built-in are quite extensive,
including verifying the constraints, so this only adds minimal tests to
the library testsuite.
This doesn't add a new _GLIBCXX_HAVE_BUILTIN_BIT_CAST because using
__has_builtin(__builtin_bit_cast) works for GCC and versions of Clang
that provide the built-in.
libstdc++-v3/ChangeLog:
PR libstdc++/93121
* include/std/bit (__cpp_lib_bit_cast, bit_cast): Define.
* include/std/version (__cpp_lib_bit_cast): Define.
* testsuite/26_numerics/bit/bit.cast/bit_cast.cc: New test.
* testsuite/26_numerics/bit/bit.cast/version.cc: New test.
Jonathan Wakely [Thu, 3 Dec 2020 17:08:01 +0000 (17:08 +0000)]
libstdc++: Disable std::array assertions for C++11 constexpr
The recent changes to add assertions to std::array broke the functions
that need to be constexpr in C++11, because of the restrictive rules for
constexpr functions in C++11.
This simply disables the assertions for C++11 mode, so the functions can
be constexpr again.
libstdc++-v3/ChangeLog:
* include/std/array (array::operator[](size_t) const, array::front() const)
(array::back() const) [__cplusplus == 201103]: Disable
assertions.
* testsuite/23_containers/array/element_access/constexpr_element_access.cc:
Check for correct values.
* testsuite/23_containers/array/tuple_interface/get_neg.cc:
Adjust dg-error line numbers.
* testsuite/23_containers/array/debug/constexpr_c++11.cc: New test.
Nathan Sidwell [Thu, 3 Dec 2020 16:58:44 +0000 (08:58 -0800)]
c++: templatey type creation
This patch makes a couple of type-creation routines available to
modules. That needs to create unbound template parms, and canonical
template parms.
gcc/cp/
* cp-tree.h (make_unbound_class_template_raw): Declare.
(canonical_type_parameter): Declare.
* decl.c (make_unbound_class_template_raw): Break out of ...
(make_unboud_class_template): ... here. Call it.
* pt.c (canonical_type_parameter): Externalize. Refactor & set
structural_equality for type parms.
Uros Bizjak [Thu, 3 Dec 2020 16:49:42 +0000 (17:49 +0100)]
i386: Fix up ix86_md_asm_adjust for TImode [PR98086]
ix86_md_asm_adjust assumes that dest_mode can be only [QHSD]Imode
and nothing else. The patch rewrites zero-extension part to use
convert_to_mode to handle TImode and hypothetically even wider modes.
2020-12-03 Uroš Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
gcc/
PR target/98086
* config/i386/i386.c (ix86_md_asm_adjustmd): Rewrite
zero-extension part to use convert_to_mode.
gcc/testsuite/
PR target/98086
* gcc.target/i386/pr98086.c: New test.
compiler: defer to middle-end for complex division
Go used to use slightly different semantics than C99 for complex division,
so we used runtime routines to handle the different. The gc compiler
has changes its behavior to match C99, so changes ours as well.
Andreas Krebbel [Thu, 3 Dec 2020 16:04:11 +0000 (17:04 +0100)]
IBM Z: Fix mode in probe_stack pattern
The probe pattern uses Pmode but the middle-end wants to emit a
word_mode probe check. This - as usual - breaks on Z with -m31
-mzarch were word_mode doesn't match Pmode.
gcc/ChangeLog:
* config/s390/s390.md ("@probe_stack2<mode>"): Change mode
iterator to W.
Nathan Sidwell [Thu, 3 Dec 2020 15:42:09 +0000 (07:42 -0800)]
c++: Fix array type dependency [PR 98107]
I'd missed some paths through build_cplus_array_type, plus, some
arrays come via the C-type builder. This propagates dependency in
more places and asserts that in the cases where TYPE_DEPENDENT_P_VALID
is unset, the type is non-dependent.
PR c++/98107
gcc/cp/
* tree.c (build_cplus_array_type): Mark dependency of new variant.
(cp_build_qualified_type_real, strip_typedefs): Assert
TYPE_DEPENDENT_P_VALID, or not a dependent type.
As the testcase shows, folding svundef*() at the gimple level
has the unfortunate side-effect of introducing -Wuninitialized
or -Wmaybe-uninitialized warnings. We don't have a testcase
that relies on the fold, so the easiest fix seems to be to
remove it.
Eric Botcazou [Thu, 3 Dec 2020 14:54:14 +0000 (15:54 +0100)]
Fix PR middle-end/98099
this replaces the ICE by a sorry message for the use of reverse scalar
storage order with 128-bit decimal floating-point type on 32-bit targets.
gcc/ChangeLog:
PR middle-end/98099
* expmed.c (flip_storage_order): In the case of a non-integer mode,
sorry out if the integer mode to be used instead is not supported.
gcc/testsuite/ChangeLog:
* gcc.dg/pr98099.c: New test.
Eric Botcazou [Thu, 3 Dec 2020 14:52:15 +0000 (15:52 +0100)]
Fix PR middle-end/98082
this fixes an ICE introduced by the fix for PR middle-end/97078 where
use_register_for_decl was changed to return true at -O0 for a parameter
of a thunk. It turns out that we need to do the same for a result in
this case.
gcc/ChangeLog:
PR middle-end/98082
* function.c (use_register_for_decl): Also return true for a result
if cfun->tail_call_marked is true.
gcc/testsuite/ChangeLog:
* g++.dg/cpp2a/pr98082.C: New test.
Jakub Jelinek [Thu, 3 Dec 2020 14:46:54 +0000 (15:46 +0100)]
c++: Add __builtin_bit_cast to implement std::bit_cast [PR93121]
The following patch adds __builtin_bit_cast builtin, similarly to
clang or MSVC which implement std::bit_cast using such an builtin too.
It checks the various std::bit_cast requirements, when not constexpr
evaluated acts pretty much like VIEW_CONVERT_EXPR of the source argument
to the destination type and the hardest part is obviously the constexpr
evaluation.
I've left out PDP11 handling of those, couldn't figure out how exactly are
bitfields laid out there
2020-12-03 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.h (native_encode_initializer): Add mask argument
defaulted to nullptr.
(find_bitfield_repr_type): Declare.
(native_interpret_aggregate): Declare.
* fold-const.c (find_bitfield_repr_type): New function.
(native_encode_initializer): Add mask argument and support for
filling it. Handle also some bitfields without integral
DECL_BIT_FIELD_REPRESENTATIVE.
(native_interpret_aggregate): New function.
* gimple-fold.h (clear_type_padding_in_mask): Declare.
* gimple-fold.c (struct clear_padding_struct): Add clear_in_mask
member.
(clear_padding_flush): Handle buf->clear_in_mask.
(clear_padding_union): Copy clear_in_mask. Don't error if
buf->clear_in_mask is set.
(clear_padding_type): Don't error if buf->clear_in_mask is set.
(clear_type_padding_in_mask): New function.
(gimple_fold_builtin_clear_padding): Set buf.clear_in_mask to false.
* doc/extend.texi (__builtin_bit_cast): Document.
* g++.dg/cpp2a/bit-cast1.C: New test.
* g++.dg/cpp2a/bit-cast2.C: New test.
* g++.dg/cpp2a/bit-cast3.C: New test.
* g++.dg/cpp2a/bit-cast4.C: New test.
* g++.dg/cpp2a/bit-cast5.C: New test.
Jakub Jelinek [Thu, 3 Dec 2020 14:32:31 +0000 (15:32 +0100)]
c++: consteval-defarg1.C test variant for templates
We weren't recognizing a default argument for a consteval member function as
being in immediate function context because there was no function parameter
scope to look at.
The following testcase is an attempt to test it with templates, both
non-dependent and dependent consteval calls in both function and class
templates, and with r11-5694 it now passes.
tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest): Do not allow __builtin_constant_p.
This is the same as commit 70a62009181f ("tree-ssa-threadbackward.c
(profitable_jump_thread_path): Do not allow __builtin_constant_p."), but
for the old forward threader.
gcc/ChangeLog:
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest):
Do not allow __builtin_constant_p on a threading path.
Kito Cheng [Wed, 25 Nov 2020 09:30:29 +0000 (17:30 +0800)]
RISC-V: Canonicalize --with-arch
- We would like to canonicalize the arch string for --with-arch for
easier handling multilib, so split canonicalization part to a stand
along script to shared the logic.
gcc/ChangeLog:
* config/riscv/multilib-generator (arch_canonicalize): Move
code to arch-canonicalize, and call that script to canonicalize arch
string.
(canonical_order): Move code to arch-canonicalize.
(LONG_EXT_PREFIXES): Ditto.
(IMPLIED_EXT): Ditto.
* config/riscv/arch-canonicalize: New.
* config.gcc (riscv*-*-*): Canonicalize --with-arch.
New +flagm (Condition flag manipulation) feature option for -march command line
option.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
gcc/ChangeLog:
* config/aarch64/aarch64-option-extensions.def
(AARCH64_OPT_EXTENSION): New +flagm option in -march for AArch64.
* config/aarch64/aarch64.h (AARCH64_FL_FLAGM): Add new flagm extension bit
mask.
(AARCH64_FL_FOR_ARCH8_4): Add flagm to Armv8.4-A.
* doc/invoke.texi: Update docs with +flagm.
liuhongt [Mon, 30 Nov 2020 05:27:16 +0000 (13:27 +0800)]
Optimize vpsubusw compared to 0 into vpcmpleuw or vpcmpnleuw [PR96906]
For signed comparisons, it handles cases that are eq or neq to 0.
For unsigned comparisons, it additionaly handles cases that are le or
gt to 0(equivilent to eq or neq to 0). Transform case eq to leu,
case neq to gtu.
.i.e. for -mavx512bw -mavx512vl transform eq case code from
liuhongt [Tue, 3 Nov 2020 09:26:43 +0000 (17:26 +0800)]
Fix incorrect replacement of vmovdqu32 with vpblendd which can cause fault.
gcc/ChangeLog:
PR target/97642
* config/i386/i386-expand.c
(ix86_expand_special_args_builtin): Don't move all-ones mask
operands into register.
* config/i386/sse.md (UNSPEC_MASKLOAD): New unspec.
(*<avx512>_load<mode>_mask): New define_insns for masked load
instructions.
(<avx512>_load<mode>_mask): Changed to define_expands which
specifically handle memory or all-ones mask operands.
(<avx512>_blendm<mode>): Changed to define_insns which are same
as original <avx512>_load<mode>_mask with adjustment of
operands order.
(*<avx512>_load<mode>): New define_insn_and_split which is
used to optimize for masked load with all one mask.
gcc/testsuite/ChangeLog:
* gcc.target/i386/avx512bw-vmovdqu16-1.c: Adjust testcase to
make sure only masked load instruction is generated.
* gcc.target/i386/avx512bw-vmovdqu8-1.c: Ditto.
* gcc.target/i386/avx512f-vmovapd-1.c: Ditto.
* gcc.target/i386/avx512f-vmovaps-1.c: Ditto.
* gcc.target/i386/avx512f-vmovdqa32-1.c: Ditto.
* gcc.target/i386/avx512f-vmovdqa64-1.c: Ditto.
* gcc.target/i386/avx512vl-vmovapd-1.c: Ditto.
* gcc.target/i386/avx512vl-vmovaps-1.c: Ditto.
* gcc.target/i386/avx512vl-vmovdqa32-1.c: Ditto.
* gcc.target/i386/avx512vl-vmovdqa64-1.c: Ditto.
* gcc.target/i386/pr97642-1.c: New test.
* gcc.target/i386/pr97642-2.c: New test.
Jason Merrill [Wed, 2 Dec 2020 22:11:48 +0000 (17:11 -0500)]
c++: Push parms when late parsing default args
In this testcase we weren't catching the error in A::f because the parameter
'I' wasn't in scope, so the default argument for 'b' found the global
typedef I. Fixed by pushing the parms before parsing. This is a bit
complicated because pushdecl clears DECL_CHAIN; do_push_parm_decls deals
with this by nreversing first, but that doesn't work here because we only
want to push them one at a time; if we pushed all of them before parsing,
we'd wrongly reject A::g.
gcc/cp/ChangeLog:
* parser.c (cp_parser_primary_expression): Distinguish
parms from vars in error.
(cp_parser_late_parsing_default_args): Pushdecl parms
as we go.
projects / thirdparty / gcc.git / log
