normal/main: Search for specific config files for netboot
This patch implements a search for a specific configuration when the config
file is on a remoteserver. It uses the following order:
1) DHCP client UUID option.
2) MAC address (in lower case hexadecimal with dash separators);
3) IP (in upper case hexadecimal) or IPv6;
4) The original grub.cfg file.
This procedure is similar to what is used by pxelinux and yaboot:
http://www.syslinux.org/wiki/index.php/PXELINUX#config
It is enabled by default but can be disabled by setting the environment
variable "feature_net_search_cfg" to "n" in an embedded configuration.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=873406 Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
net/dhcp: Set net_<interface>_client{id, uuid} variables from DHCP options
This patch sets a net_<interface>_clientid and net_<interface>_clientuuid
GRUB environment variables, using the DHCP client ID and UUID options if
these are found.
In the same way than net_<interface>_<option> variables are set for other
options such domain name, boot file, next server, etc.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
net/dhcp: Consistently use decimal numbers for DHCP/BOOTP options enum
The DHCP Options and BOOTP Vendor Extensions enum values are a mixture of
decimal and hexadecimal numbers. Change this to consistently use decimal
numbers for all since that is how these values are defined by RFC 2132.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The printf(3) function has support for the %X format specifier, to output
an unsigned hexadecimal integer in uppercase.
This can be achived in GRUB using the %x format specifier in grub_printf()
and calling grub_toupper(), but it is more convenient if there is support
for %X in grub_printf().
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
normal: Move common datetime functions out of the normal module
The common datetime helper functions are currently included in the normal
module, but this makes any other module that calls these functions to have
a dependency with the normal module only for this reason.
Since the normal module does a lot of stuff, it calls functions from other
modules. But since other modules may depend on it for calling the datetime
helpers, this could lead to circular dependencies between modules.
As an example, when platform == xen the grub_get_datetime() function from
the datetime module calls to the grub_unixtime2datetime() helper function
from the normal module. Which leads to the following module dependency:
datetime -> normal
and send_dhcp_packet() from the net module calls the grub_get_datetime()
function, which leads to the following module dependency:
net -> datetime -> normal
but that means that the normal module is not allowed to depend on net or
any other module that depends on it due the transitive dependency caused
by datetime. A recent patch attempted to add support to fetch the config
file over the network, which leads to the following circular dependency:
normal -> net -> datetime -> normal
So having the datetime helpers in the normal module makes it quite fragile
and easy to add circular dependencies like these, that break the build due
the genmoddep.awk script catching the issues.
Fix this by taking the datetime helper functions out of the normal module
and instead add them to the datetime module itself. Besides fixing these
issues, it makes more sense to have these helper functions there anyways.
Reported-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Peter Jones [Mon, 20 Jan 2020 14:07:49 +0000 (15:07 +0100)]
minilzo: Update to minilzo-2.08
This patch updates the miniLZO library to a newer version, which among other
things fixes "CVE-2014-4607 - lzo: lzo1x_decompress_safe() integer overflow"
that is present in the current used in GRUB.
It also updates the "GRUB Developers Manual", to mention that the library is
used and describes the process to update it to a newer release when needed.
Resolves: http://savannah.gnu.org/bugs/?42635
Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Peter Jones [Mon, 27 Jan 2020 20:01:16 +0000 (15:01 -0500)]
squash4: Fix an uninitialized variable
gcc says:
grub-core/fs/squash4.c: In function ‘direct_read’:
grub-core/fs/squash4.c:868:10: error: ‘err’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
868 | if (err)
| ^
cc1: all warnings being treated as errors
This patch initializes it to GRUB_ERR_NONE.
Signed-off-by: Peter Jones <pjones@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
C. Masloch [Fri, 20 Dec 2019 15:04:21 +0000 (16:04 +0100)]
freedos: Fix FreeDOS command booting large files (near or above 64 KiB)
While testing the 86-DOS lDebug [1] booting from GRUB2, newer versions of the
debugger would fail to load when booted using GRUB's freedos command. The
behaviour observed in a qemu i386 machine was that the ROM-BIOS's boot load
would start anew, instead of loading the selected debugger as kernel.
It came to light that there was a size limit: Kernel files that were 58880
bytes (E600h) long or shorter succeeded to boot, while files that were 64000
bytes or longer failed in the manner described.
Eventually it turned out that the relocator16 stub succeeded whenever it was
placed completely within the first 64 KiB of the Low Memory Area. The chunk
for the relocator is allocated with a minimum address of 0x8010 and a maximum
address just below 0xA0000 [2]. That means if the kernel is, for instance,
E600h bytes long, then the kernel will be allocated memory starting at 00600h
(the fixed FreeDOS kernel load address) up to E600h + 00600h = 0EC00h, which
leaves 1400h (5120) bytes for the relocator to stay in the first 64 KiB.
If the kernel is 64000 bytes (FA00h) long, then the relocator must go to
FA00h + 00600h = 10000h at least which is outside the first 64 KiB.
The problem is that the relocator16 initialises the DS register with a
"pseudo real mode" descriptor, which is defined with a segment limit of
64 KiB and a segment base of zero. After that, the relocator addressed
parts of itself (implicitly) using the DS register, with an offset from
ESI, which holds the linear address of the relocator's base [3]. With the
larger kernel files this would lead to accessing data beyond the 64 KiB
segment limit, presumably leading to a fault and perhaps a subsequent
triple-fault or such.
This patch fixes the relocator to set the segment base of the descriptors
to the base address of the relocator; then, the subsequent accesses to
the relocator's variables are done without the ESI register as an index.
This does not interfere with the relocator's or its target's normal
operation; the segment limits are still loaded with 64 KiB and all the
segment bases are subsequently reset by the relocator anyway.
Current versions of the debugger to test are uploaded to [4]. The file
ldebugnh.com (LZ4-compressed and built with -D_EXTHELP=0) at 58368 bytes
loads successfully, whereas ldebug.com at 64000 bytes fails. Loading one
of these files requires setting root to a FAT FS partition and using the
freedos command to specify the file as kernel:
set root='(hd0,msdos1)'
freedos /ldebug.com
boot
Booting the file using the multiboot command (which uses a WIP entrypoint
of the debugger) works, as it does not use GRUB's relocator16 but instead
includes a loader in the kernel itself, which drops it back to 86 Mode.
With cryptsetup 2.0, a new version of LUKS was introduced that breaks
compatibility with the previous version due to various reasons. GRUB
currently lacks any support for LUKS2, making it impossible to decrypt
disks encrypted with that version. This commit implements support for
this new format.
Note that LUKS1 and LUKS2 are quite different data formats. While they
do share the same disk signature in the first few bytes, representation
of encryption parameters is completely different between both versions.
While the former version one relied on a single binary header, only,
LUKS2 uses the binary header only in order to locate the actual metadata
which is encoded in JSON. Furthermore, the new data format is a lot more
complex to allow for more flexible setups, like e.g. having multiple
encrypted segments and other features that weren't previously possible.
Because of this, it was decided that it doesn't make sense to keep both
LUKS1 and LUKS2 support in the same module and instead to implement it
in two different modules luks and luks2.
The proposed support for LUKS2 is able to make use of the metadata to
decrypt such disks. Note though that in the current version, only the
PBKDF2 key derival function is supported. This can mostly attributed to
the fact that the libgcrypt library currently has no support for either
Argon2i or Argon2id, which are the remaining KDFs supported by LUKS2. It
wouldn't have been much of a problem to bundle those algorithms with
GRUB itself, but it was decided against that in order to keep down the
number of patches required for initial LUKS2 support. Adding it in the
future would be trivial, given that the code structure is already in
place.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
luks: Move configuration of ciphers into cryptodisk
The luks module contains quite a lot of logic to parse cipher and
cipher-mode strings like aes-xts-plain64 into constants to apply them
to the grub_cryptodisk_t structure. This code will be required by the
upcoming luks2 module, as well, which is why this commit moves it into
its own function grub_cryptodisk_setcipher in the cryptodisk module.
While the strings are probably rather specific to the LUKS modules, it
certainly does make sense that the cryptodisk module houses code to set
up its own internal ciphers instead of hosting that code in the luks
module.
Except for necessary adjustments around error handling, this commit does
an exact move of the cipher configuration logic from luks.c to
cryptodisk.c. Any behavior changes are unintentional.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While the AFSplitter code is currently used only by the luks module,
upcoming support for luks2 will add a second module that depends on it.
To avoid any linker errors when adding the code to both modules because
of duplicated symbols, this commit moves it into its own standalone
module afsplitter as a preparatory step.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The upcoming support for LUKS2 disc encryption requires us to include a
parser for base64-encoded data, as it is used to represent salts and
digests. As gnulib already has code to decode such data, we can just
add it to the boostrapping configuration in order to make it available
in GRUB.
The gnulib module makes use of booleans via the <stdbool.h> header. As
GRUB does not provide any POSIX wrapper header for this, but instead
implements support for bool in <sys/types.h>, we need to patch
base64.h to not use <stdbool.h> anymore. We unfortunately cannot include
<sys/types.h> instead, as it would then use gnulib's internal header
while compiling the gnulib object but our own <sys/types.h> when
including it in a GRUB module. Because of this, the patch replaces the
include with a direct typedef.
A second fix is required to make available _GL_ATTRIBUTE_CONST, which
is provided by the configure script. As base64.h does not include
<config.h>, it is thus not available and results in a compile error.
This is fixed by adding an include of <config-util.h>.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While the newly added jsmn library provides the parsing interface, it
does not provide any kind of interface to act on parsed tokens. Instead,
the caller is expected to handle pointer arithmetics inside of the token
array in order to extract required information. While simple, this
requires users to know some of the inner workings of the library and is
thus quite an unintuitive interface.
This commit adds a new interface on top of the jsmn parser that provides
convenience functions to retrieve values from the parsed json type, grub_json_t.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The upcoming support for LUKS2 encryption will require a JSON parser to
decode all parameters required for decryption of a drive. As there is
currently no other tool that requires JSON, and as gnulib does not
provide a parser, we need to introduce a new one into the code base. The
backend for the JSON implementation is going to be the jsmn library [1].
It has several benefits that make it a very good fit for inclusion in
GRUB:
- It is licensed under MIT.
- It is written in C89.
- It has no dependencies, not even libc.
- It is small with only about 500 lines of code.
- It doesn't do any dynamic memory allocation.
- It is testen on x86, amd64, ARM and AVR.
The library itself comes as a single header, only, that contains both
declarations and definitions. The exposed interface is kind of
simplistic, though, and does not provide any convenience features
whatsoever. Thus there will be a separate interface provided by GRUB
around this parser that is going to be implemented in the following
commit. This change only imports jsmn.h from tag v1.1.0 and adds it
unmodified to a new json module with the following command:
Lukasz Hawrylko [Mon, 16 Dec 2019 10:15:55 +0000 (11:15 +0100)]
multiboot2: Set min address for mbi allocation to 0x1000
In some cases GRUB2 allocates multiboot2 structure at 0 address, that is
a confusing behavior. Consumers of that structure can have internal NULL-checks
that will throw an error when get a pointer to data allocated at address 0.
To prevent that, define min address for mbi allocation on x86 and x86_64
platforms.
Signed-off-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Daniel Kiper [Mon, 2 Dec 2019 17:29:39 +0000 (18:29 +0100)]
loader/i386/linux: Fix an underflow in the setup_header length calculation
Recent work around x86 Linux kernel loader revealed an underflow in the
setup_header length calculation and another related issue. Both lead to
the memory overwrite and later machine crash.
Currently when the GRUB copies the setup_header into the linux_params
(struct boot_params, traditionally known as "zero page") it assumes the
setup_header size as sizeof(linux_i386_kernel_header/lh). This is
incorrect. It should use the value calculated accordingly to the Linux
kernel boot protocol. Otherwise in case of pretty old kernel, to be
exact Linux kernel boot protocol, the GRUB may write more into
linux_params than it was expected to. Fortunately this is not very big
issue. Though it has to be fixed. However, there is also an underflow
which is grave. It happens when
sizeof(linux_i386_kernel_header/lh) > "real size of the setup_header".
Then len value wraps around and grub_file_read() reads whole kernel into
the linux_params overwriting memory past it. This leads to the GRUB
memory allocator breakage and finally to its crash during boot.
The patch fixes both issues. Additionally, it moves the code not related to
grub_memset(linux_params)/grub_memcpy(linux_params)/grub_file_read(linux_params)
section outside of it to not confuse the reader.
Fixes: e683cfb0cf5 (loader/i386/linux: Calculate the setup_header length) Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Ross Philipson <ross.philipson@oracle.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
David Sterba [Mon, 4 Nov 2019 16:23:22 +0000 (17:23 +0100)]
btrfs: Add support for new RAID1C34 profiles
New 3- and 4-copy variants of RAID1 were merged into Linux kernel 5.5.
Add the two new profiles to the list of recognized ones. As this builds
on the same code as RAID1, only the redundancy level needs to be
adjusted, the rest is done by the existing code.
Signed-off-by: David Sterba <dsterba@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Tue, 5 Nov 2019 09:20:22 +0000 (09:20 +0000)]
grub-editenv: Warn a user against editing environment block
The environment block is a preallocated 1024-byte file which serves as
persistent storage for environment variables. It has its own format
which is sensitive to corruption if an editor does not know how to
process it. Besides that the editor may inadvertently change grubenv
file size and/or make it sparse which can lead to unexpected results.
This patch adds a message to the grubenv file to warn a user against
editing it by tools other than grub-editenv.
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The requirement related to the warning is dictated in the lvm man page:
"On invocation, lvm requires that only the standard file descriptors stdin,
stdout and stderr are available. If others are found, they get closed and
messages are issued warning about the leak. This warning can be suppressed by
setting the environment variable LVM_SUPPRESS_FD_WARNINGS."
While it could be disabled through settings, most Linux distributions seem to
enable it by default and the justification provided by the developer looks to
be valid to me: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466138#15
Rather than trying to close and reopen the file descriptor to the same file
multiple times, which is rather cumbersome, for the sake of no vgs invocation
could happen in between. This patch enables the close-on-exec flag (O_CLOEXEC)
for new file descriptor returned by the open() system call, making it closed
thus not inherited by the child process forked and executed by the exec()
family of functions.
Fixes Debian bug #466138.
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Eli Schwartz [Thu, 17 Oct 2019 03:03:06 +0000 (23:03 -0400)]
grub-mkconfig: Use portable "command -v" to detect installed programs
The "which" utility is not guaranteed to be installed either, and if it
is, its behavior is not portable either.
Conversely, the "command -v" shell builtin is required to exist in all
POSIX 2008 compliant shells, and is thus guaranteed to work everywhere.
Examples of open-source shells likely to be installed as /bin/sh on
Linux, which implement the 11-year-old standard: ash, bash, busybox,
dash, ksh, mksh and zsh.
A side benefit of using the POSIX portable option is that it requires
neither an external disk executable, nor (because unlike "which", the
exit code is reliable) a subshell fork. This therefore represents a mild
speedup.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Peter Jones [Tue, 22 Oct 2019 08:44:28 +0000 (10:44 +0200)]
templates: Add GRUB_DISABLE_UUID
The grub-mkconfig and 10_linux scripts by default attempt to use a UUID to
set the root kernel command line parameter and the $root GRUB environment
variable.
The former can be disabled by setting the GRUB_DISABLE_LINUX_UUID variable
to "true", but there is currently no way to disable the latter.
The generated grub config uses the search command with the --fs-uuid option
to find the device that has to be set as $root, i.e:
search --no-floppy --fs-uuid --set=root ...
This is usually more reliable but in some cases it may not be appropriate,
so this patch introduces a new GRUB_DISABLE_UUID variable that can be used
to disable searching for the $root device by filesystem UUID.
When disabled, the $root device will be set to the value specified in the
device.map as found by the grub-probe --target=compatibility_hint option.
When setting GRUB_DISABLE_UUID=true, the GRUB_DISABLE_LINUX_UUID and
GRUB_DISABLE_LINUX_PARTUUID variables will also be set to "true" unless
these have been explicitly set to "false".
That way, the GRUB_DISABLE_UUID variable can be used to force using the
device names for both GRUB and Linux.
Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Nicholas Vinson <nvinson234@gmail.com>
Michael Bideau [Wed, 2 Oct 2019 21:48:10 +0000 (23:48 +0200)]
at_keyboard: Fix unreliable key presses
This patch fixes an issue that prevented the at_keyboard module to work
(for me). The cause was a bad/wrong return value in the
grub_at_keyboard_getkey() function in grub-core/term/at_keyboard.c file
at line 237. My symptoms were to have an unresponsive keyboard. Keys
needed to be pressed 10x and more to effectively be printed sometimes
generating multiple key presses (after 1 or 2 sec of no printing). It
was very problematic when typing passphrase in early stage (with
GRUB_ENABLE_CRYPTODISK). When switched to "console" terminal input
keyboard worked perfectly. It also worked great with the GRUB 2.02
packaged by Debian (2.02+dfsg1-20). It was not an output issue but an
input one.
I've managed to analyze the issue and found that it came from the commit 216950a4e (at_keyboard: Split protocol from controller code.). Three
lines where moved from the fetch_key() function in
grub-core/term/at_keyboard.c file to the beginning of
grub_at_keyboard_getkey() function (same file). However, returning -1
made sense when it happened in fetch_key() function but not anymore in
grub_at_keyboard_getkey() function which should return GRUB_TERM_NO_KEY.
I think it was just an incomplete cut-paste missing a small manual
correction. Let's fix it.
Note: Commit message updated by Daniel Kiper.
Signed-off-by: Michael Bideau <mica.devel@gmail.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GRUB_DISABLE_SUBMENU option is different than the others in the sense
that it has to be set to "y" instead of "true" to be enabled.
That causes a lot of confusion to users, some may wrongly set it to "true"
expecting that will work the same than with most options, and some may set
it to "yes" since for other options the value to set is a word and not a
single character.
This patch changes all the grub.d scripts using the GRUB_DISABLE_SUBMENU
option, so they check if it was set to "true" instead of "y", making it
consistent with all the other options.
But to keep backward compatibility for users that set the option to "y" in
/etc/default/grub file, keep testing for this value. And also do it for
"yes", since it is a common mistake made by users caused by this option
being inconsistent with the others.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Colin Watson [Fri, 23 Aug 2019 11:00:30 +0000 (12:00 +0100)]
grub-mkconfig: Fix typo in --help output
The short form of "--version" that grub-mkconfig accepts is "-V", not "-v".
Fixes Debian bug #935504.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com> Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Peter Jones [Tue, 17 Sep 2019 15:50:58 +0000 (17:50 +0200)]
gitattributes: Mark po/exclude.pot as binary so git won't try to diff nonprintables
Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Andre Przywara [Wed, 21 Aug 2019 15:58:34 +0000 (16:58 +0100)]
docs: Document newly introduced net_dhcp command
Commit 5bc41db756c5 ("net/dhcp: Add explicit net_dhcp command")
introduced the new command "net_dhcp", which (for now) is an alias for
the existing "net_bootp". Unfortunately the TEXI documentation was not
adjusted accordingly.
Rename the existing paragraph about net_bootp to read net_dhcp instead,
and make the net_bootp stanza point to this new command.
On the way add the newly parsed TFTP_SERVER_NAME and BOOTFILE_NAME
packets to the list of supported DHCP options.
Fixes bug: https://savannah.gnu.org/bugs/?56725
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
James Clarke [Thu, 18 Jul 2019 12:31:55 +0000 (14:31 +0200)]
[PATCH] sparc64: Fix BIOS Boot Partition support
Currently, gpt_offset is uninitialised when using a BIOS Boot Partition
but is used unconditionally inside save_blocklists. Instead, ensure it
is always initialised to 0 (note that there is already separate code to
do the equivalent adjustment after we call save_blocklists on this code
path).
This patch has been tested on a T5-2 LDOM.
Signed-off-by: James Clarke <jrtc27@jrtc27.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
---
util/setup.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
MinGW for i386-pc without this option generates a .rdata$zzz symbol that is
page-aligned and hence lzma_decompress no longer fits in its allocated space.
Additionally, MinGW with -fno-ident also saves a bit of space in modules. In
case of other compilers we already strip the relevant sections, so, this
option has no effect.
More info can be found at https://github.com/msys2/MINGW-packages/issues/21
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The device tree may passed by the firmware as UEFI configuration
table. Let lsefisystab display a short text and not only the GUID
for the device tree.
David Michael [Fri, 5 Jul 2019 12:47:09 +0000 (08:47 -0400)]
smbios: Add a module for retrieving SMBIOS information
The following are two use cases from Rajat Jain <rajatjain@juniper.net>:
1) We have a board that boots Linux and this board itself can be plugged
into one of different chassis types. We need to pass different
parameters to the kernel based on the "CHASSIS_TYPE" information
that is passed by the bios in the DMI/SMBIOS tables.
2) We may have a USB stick that can go into multiple boards, and the
exact kernel to be loaded depends on the machine information
(PRODUCT_NAME etc) passed via the DMI.
Signed-off-by: David Michael <fedora.dm0@gmail.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
David Michael [Fri, 5 Jul 2019 12:47:02 +0000 (08:47 -0400)]
lsefisystab: Define SMBIOS3 entry point structures for EFI
This adds the GUID and includes it in lsefisystab output.
Signed-off-by: David Michael <fedora.dm0@gmail.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Leif Lindholm [Tue, 4 Jun 2019 11:39:16 +0000 (12:39 +0100)]
configure: Disable arm movw/movt relocations for GCC
When building for arm, we already disable movw/movt relocations for clang,
since they are incompatible with PE.
When building with bare metal GCC toolchains (like the one used in the
travis ci scripts), we end up with these relocations again. So add an
additional test for the '-mword-relocations' flag used by GCC.
Reported-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Jacob Kroon [Wed, 15 May 2019 19:04:43 +0000 (21:04 +0200)]
probe: Support probing for partition UUID with --part-uuid
Linux supports root=PARTUUID=<partuuid> boot argument, so add
support for probing it. Compared to the fs UUID, the partition
UUID does not change when reformatting a partition.
For now, only disks using a GPT partition table are supported.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Leif Lindholm [Thu, 6 Jun 2019 09:13:00 +0000 (10:13 +0100)]
ia64: build fix in cache.h
Add IA64 to the architectures excluding a declaration for
grub_arch_sync_dma_caches().
IA64 does not include any of the source files that require the function,
but was overlooked for d8901e3ba115 ("cache: Fix compilation for ppc,
sparc and arm64").
Add it to the list of excluding architectures in order to not get
missing symbol errors when running grub-mkimage.
Reported-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Disable the -Wadress-of-packaed-member diagnostic for the grub_f2fs_label
function since the result is found to be false postive.
A pointer to the 'volume_name' member of 'struct grub_f2fs_superblock' is
guaranteed to be aligned as the offset of 'volume_name' within the struct
is dividable by the natural alignment on both 32- and 64-bit targets.
grub-core/fs/f2fs.c: In function ‘grub_f2fs_label’:
grub-core/fs/f2fs.c:1253:60: error: taking address of packed member of ‘struct grub_f2fs_superblock’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1253 | *label = (char *) grub_f2fs_utf16_to_utf8 (data->sblock.volume_name);
| ~~~~~~~~~~~~^~~~~~~~~~~~
cc1: all warnings being treated as errors
Reported-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Neil MacLeod <neil@nmacleod.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
video: skip 'text' gfxpayload if not supported, to fallback to default
On UEFI, 'text' gfxpayload is not supported, but we still reach parse_modespec()
with it, which will obviously fail. Fortunately, whatever gfxpayload is set,
we still still have the 'auto' default to fall back to. Allow getting to this
fallback by not trying to parse 'text' as a modespec.
This is because 'text' correctly doesn't parse as a modespec, and ought to have
been ignored before we got to that point, just like it is immediately picked if
we're running on a system where 'text' is a supported video mode.
Michael Chang [Fri, 17 May 2019 09:00:19 +0000 (17:00 +0800)]
f2fs: Fix gcc9 error -Werror=maybe-uninitialized
The function grub_get_node_path() could return uninitialized offset with
level == 0 if the block is greater than direct_index + 2 * direct_blks +
2 * indirect_blks + dindirect_blks. The uninitialized offset is then used
by function grub_f2fs_get_block() because level == 0 is valid and
meaningful return to be processed.
The fix is to set level = -1 as return value by grub_get_node_path() to
signify an error that the input block cannot be handled. Any caller
should therefore check level is negative or not before processing the
output.
Reported-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: Michael Chang <mchang@suse.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Alexander Graf [Tue, 30 Apr 2019 20:43:57 +0000 (22:43 +0200)]
arm: Align section alignment with manual relocation offset code
The arm relocation code has a manual special case for EFI binaries to
add the natural alignment to its own relocation awareness.
Since commit a51f953f4ee87 ("mkimage: Align efi sections on 4k
boundary") we changed that alignment from 0x400 to 0x1000 bytes. Reflect
the change in that branch that we forgot as well.
This fixes running 32bit arm grub efi binaries for me again.
Fixes: a51f953f4ee87 ("mkimage: Align efi sections on 4k boundary") Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reported-by: Steve McIntyre <steve@einval.com> Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Tested-by: Julien ROBIN <julien.robin28@free.fr> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Alexander Graf [Tue, 30 Apr 2019 20:43:56 +0000 (22:43 +0200)]
arm: Move trampolines into code section
When creating T32->A32 transition jumps, the relocation code in grub
will generate trampolines. These trampolines live in the .data section
of our PE binary which means they are not marked as executable.
This misbehavior was unmasked by commit a51f953f4ee87 ("mkimage: Align
efi sections on 4k boundary") which made the X/NX boundary more obvious
because everything became page aligned.
To put things into proper order, let's move the arm trampolines into the
.text section instead. That way everyone knows they are executable.
Fixes: a51f953f4ee87 ("mkimage: Align efi sections on 4k boundary") Reported-by: Julien ROBIN <julien.robin28@free.fr> Reported-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Alexander Graf <agraf@csgraf.de> Tested-by: Julien ROBIN <julien.robin28@free.fr> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:09 +0000 (17:14 +0800)]
efi: Fix gcc9 error -Waddress-of-packed-member
The address of fp->path_name could be unaligned since seeking into the
device path buffer for a given node could end in byte boundary.
The fix is allocating aligned buffer by grub_malloc for holding the
UTF16 string copied from fp->path_name, and after using that buffer as
argument for grub_utf16_to_utf8 to convert it to UTF8 string.
[ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_get_filename':
[ 255s] ../../grub-core/kern/efi/efi.c:410:60: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 255s] 410 | p = (char *) grub_utf16_to_utf8 ((unsigned char *) p, fp->path_name, len);
[ 255s] | ~~^~~~~~~~~~~
[ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_print_device_path':
[ 255s] ../../grub-core/kern/efi/efi.c:900:33: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 255s] 900 | *grub_utf16_to_utf8 (buf, fp->path_name,
[ 255s] | ~~^~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The address of fp->path_name could be unaligned since seeking into the
device path buffer for a given node could end in byte boundary.
The fix is using aligned buffer allocated by grub_malloc for receiving
the converted UTF16 string by grub_utf8_to_utf16 and also the processing
after. The resulting string then gets copied to fp->path_name.
[ 243s] ../../grub-core/loader/efi/chainloader.c: In function 'copy_file_path':
[ 243s] ../../grub-core/loader/efi/chainloader.c:136:32: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 243s] 136 | size = grub_utf8_to_utf16 (fp->path_name, len * GRUB_MAX_UTF16_PER_UTF8,
[ 243s] | ~~^~~~~~~~~~~
[ 243s] ../../grub-core/loader/efi/chainloader.c:138:12: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 243s] 138 | for (p = fp->path_name; p < fp->path_name + size; p++)
[ 243s] | ^~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:07 +0000 (17:14 +0800)]
usbtest: Disable gcc9 -Waddress-of-packed-member
Disable the -Wadress-of-packaed-member diagnostic for the
grub_usb_get_string function since the result is false postive. The
descstrp->str is found to be aligned in the buffer allocated for 'struct
grub_usb_desc_str'.
[ 229s] ../../grub-core/commands/usbtest.c: In function 'grub_usb_get_string':
[ 229s] ../../grub-core/commands/usbtest.c:104:58: error: taking address of packed member of 'struct grub_usb_desc_str' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 229s] 104 | *grub_utf16_to_utf8 ((grub_uint8_t *) *string, descstrp->str,
[ 229s] | ~~~~~~~~^~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:06 +0000 (17:14 +0800)]
acpi: Fix gcc9 error -Waddress-of-packed-member
Simply adds the missing packed attribute to 'struct grub_acpi_madt'.
[ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_xsdt_table':
[ 233s] ../../grub-core/commands/lsacpi.c:201:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 233s] 201 | disp_madt_table ((struct grub_acpi_madt *) t);
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
[ 233s] ../../include/grub/acpi.h:50:8: note: defined here
[ 233s] 50 | struct grub_acpi_table_header
[ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
[ 233s] ../../include/grub/acpi.h:90:8: note: defined here
[ 233s] 90 | struct grub_acpi_madt
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_rsdt_table':
[ 233s] ../../grub-core/commands/lsacpi.c:225:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 233s] 225 | disp_madt_table ((struct grub_acpi_madt *) t);
[ 233s] | ^~~~~~~~~~~~~~
[ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
[ 233s] ../../include/grub/acpi.h:50:8: note: defined here
[ 233s] 50 | struct grub_acpi_table_header
[ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
[ 233s] ../../include/grub/acpi.h:90:8: note: defined here
[ 233s] 90 | struct grub_acpi_madt
[ 233s] | ^~~~~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:05 +0000 (17:14 +0800)]
hfsplus: Fix gcc9 error with -Waddress-of-packed-member
The catkey->name could be unaligned since the address of 'void* record'
is calculated as offset in bytes to a malloc buffer.
The fix is using aligned buffer allocated by grub_malloc for holding
the UTF16 string copied from catkey->name. And use that buffer as
argument for grub_utf16_to_utf8 to convert to UTF8 strings.
In addition, using a new copy of buffer rather than catkey->name itself
for processing the endianess conversion, we can also get rid of the hunk
restoring byte order of catkey->name to what it was previously.
[ 59s] ../grub-core/fs/hfsplus.c: In function 'list_nodes':
[ 59s] ../grub-core/fs/hfsplus.c:738:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 738 | *grub_utf16_to_utf8 ((grub_uint8_t *) filename, catkey->name,
[ 59s] | ~~~~~~^~~~~~
[ 59s] ../grub-core/fs/hfsplus.c: In function 'grub_hfsplus_label':
[ 59s] ../grub-core/fs/hfsplus.c:1019:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 1019 | *grub_utf16_to_utf8 ((grub_uint8_t *) (*label), catkey->name,
[ 59s] | ~~~~~~^~~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:04 +0000 (17:14 +0800)]
hfs: Fix gcc9 error -Waddress-of-packed-member
Simply adds the missing packed attribute to 'struct grub_hfs_extent'.
[ 83s] ../grub-core/fs/hfs.c: In function 'grub_hfs_iterate_records':
[ 83s] ../grub-core/fs/hfs.c:699:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 83s] 699 | ? (&data->sblock.catalog_recs)
[ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~
[ 83s] ../grub-core/fs/hfs.c:700:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 83s] 700 | : (&data->sblock.extent_recs));
[ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:03 +0000 (17:14 +0800)]
jfs: Disable gcc9 -Waddress-of-packed-member
Disable the -Wadress-of-packaed-member diagnostic for the
grub_jfs_getent function since the result is found to be false postive.
The leaf is read into memory as continous chunks in size of 32 bytes and
the pointer to its base is aligned, which also guarentee its member
leaf->namepart is aligned.
[ 60s] ../grub-core/fs/jfs.c: In function 'grub_jfs_getent':
[ 60s] ../grub-core/fs/jfs.c:557:44: error: taking address of packed member of 'struct grub_jfs_leaf_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 60s] 557 | le_to_cpu16_copy (filename + strpos, leaf->namepart, len < diro->data->namecomponentlen ? len
[ 60s] | ~~~~^~~~~~~~~~
[ 60s] ../grub-core/fs/jfs.c:570:48: error: taking address of packed member of 'struct grub_jfs_leaf_next_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 60s] 570 | le_to_cpu16_copy (filename + strpos, next_leaf->namepart, len < 15 ? len : 15);
[ 60s] | ~~~~~~~~~^~~~~~~~~~
[ 60s] cc1: all warnings being treated as errors
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang [Thu, 11 Apr 2019 09:14:02 +0000 (17:14 +0800)]
cpio: Disable gcc9 -Waddress-of-packed-member
Disable the -Wadress-of-packaed-member diagnostic for the
grub_cpio_find_file function since the result is found to be false
postive. Any pointers to member of the 'struct head hd' is aligned even
if the structure is packed without paddings.
[ 59s] In file included from ../grub-core/fs/cpio.c:51:
[ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
[ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
[ 59s] | ~~^~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
[ 59s] | ~~^~~~~
[ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] In file included from ../grub-core/fs/cpio_be.c:51:
[ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
[ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
[ 59s] | ~~^~~~~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
[ 59s] | ~~^~~~~~
[ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
[ 59s] | ~~^~~~~
[ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
[ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
[ 59s] | ~~^~~~~~~~~
Signed-off-by: Michael Chang <mchang@suse.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The UEFI specification allows LoadImage() to be called with a memory
location only and without a device path. In this case FilePath will not be
set in the EFI_LOADED_IMAGE_PROTOCOL.
So in function grub_efi_get_filename() the device path argument may be
NULL. As we cannot determine the device path in this case just return NULL
from the function.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Daniel Kiper [Fri, 12 Apr 2019 10:50:04 +0000 (12:50 +0200)]
x86/msr: Fix build with older GCC versions
Some older GCC versions produce following error when x86 MSR modules are build:
In file included from commands/i386/rdmsr.c:29:0:
../include/grub/i386/rdmsr.h:27:29: error: no previous prototype for ‘grub_msr_read’ [-Werror=missing-prototypes]
extern inline grub_uint64_t grub_msr_read (grub_uint32_t msr_id)
^
cc1: all warnings being treated as errors
This happens due to lack of support for a such usage of extern keyword
in older GCCs. Additionally, this usage is not consistent with the rest
of codebase. So, replace it with static keyword.
Additionally, fix incorrect coding style.
Reported-by: Eric Snowberg <eric.snowberg@oracle.com> Reported-by: adrian15 <adrian15sgd@gmail.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com> Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com> Tested-by: adrian15 <adrian15sgd@gmail.com>
Eric Snowberg [Tue, 2 Apr 2019 16:40:31 +0000 (09:40 -0700)]
ieee1275: NULL pointer dereference in grub_ieee1275_encode_devname()
Function grub_strndup() may return NULL, this is called from
function grub_ieee1275_get_devname() which is then called from
function grub_ieee1275_encode_devname() to set device. The device
variable could then be used with a NULL pointer.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Colin Watson <cjwatson@ubuntu.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Daniel Kiper [Fri, 29 Mar 2019 15:11:04 +0000 (16:11 +0100)]
docs/grub-dev: Change comments rules
Current comments forms are annoying, so, some of them are disallowed
starting from now. New rules are more flexible and mostly aligned
with, e.g., Linux kernel comments rules.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
Andrew Jeddeloh [Fri, 29 Mar 2019 15:09:54 +0000 (16:09 +0100)]
loader/i386/linux: Calculate the setup_header length
Previously the setup_header length was just assumed to be the size of the
linux_kernel_params struct. The linux x86 32-bit boot protocol says that the
end of the linux_i386_kernel_header is at 0x202 + the byte value at 0x201 in
the linux_i386_kernel_header. So, calculate the size of the header using the
end of the linux_i386_kernel_header, rather than assume it is the size of the
linux_kernel_params struct.
Additionally, add some required members to the linux_kernel_params
struct and align the content of linux_i386_kernel_header struct with
it. New members naming was taken directly from Linux kernel source.
linux_kernel_params and linux_i386_kernel_header structs require more
cleanup. However, this is not urgent, so, let's do this after release.
Just in case...
Signed-off-by: Andrew Jeddeloh <andrew.jeddeloh@coreos.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Vladimir Serbinenko <phcoder@google.com> Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
ieee1275: Include a.out header in assembly of sparc64 boot loader
Recent versions of binutils dropped support for the a.out and COFF
formats on sparc64 targets. Since the boot loader on sparc64 is
supposed to be an a.out binary and the a.out header entries are
rather simple to calculate in our case, we just write the header
ourselves instead of relying on external tools to do that.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Daniel Kiper [Thu, 14 Mar 2019 18:45:17 +0000 (19:45 +0100)]
verifiers: PowerPC fallout cleanup
PowerPC fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
to verify kernel and modules command lines) and ca0a4f689 (verifiers: File
type for fine-grained signature-verification controlling).
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Colin Watson [Tue, 19 Mar 2019 10:26:18 +0000 (10:26 +0000)]
posix_wrap: Flesh out posix_wrap/limits.h a little more
In addition to what was already there, Gnulib's <intprops.h> needs SCHAR_MIN,
SCHAR_MAX, SHRT_MIN, INT_MIN, LONG_MIN, and LONG_MAX. Fixes build on CentOS 7.
Reported-by: "Chen, Farrah" <farrah.chen@intel.com> Signed-off-by: Colin Watson <cjwatson@ubuntu.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mirror behaviour of ELF loader in libxc: first look for Xen notes in
PT_NOTE segment, then in SHT_NOTE section and only then fallback to
a section with __xen_guest name. This fixes loading PV kernels that
Xen note have outside of PT_NOTE. While this may be result of a buggy
linker script, loading such kernel directly works fine, so make it work
with GRUB too. Specifically, this applies to binaries built from Unikraft.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Colin Watson [Sat, 9 Mar 2019 14:37:17 +0000 (14:37 +0000)]
getroot: Save/restore CWD more reliably on Unix
Various GRUB utilities fail if the current directory doesn't exist,
because grub_find_device() chdirs to a different directory and then
fails when trying to chdir back. Gnulib's save-cwd module uses fchdir()
instead when it can, avoiding this category of problem.
Fixes Debian bug #918700.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Mostly for cosmetic reasons, we add a "net_dhcp" command, which is (at the
moment) identical to the existing "net_bootp" command. Both actually trigger
a DHCP handshake now, and both should be able to deal with pure BOOTP servers.
We could think about dropping the DHCP options from the initial DISCOVER packet
when the user issues the net_bootp command, but it's unclear whether this is
really useful, as both protocols should be able to coexist.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
net/dhcp: Actually send out DHCPv4 DISCOVER and REQUEST messages
Even though we were parsing some DHCP options sent by the server, so far
we are only using the BOOTP 2-way handshake, even when talking to a DHCP
server.
Change this by actually sending out DHCP DISCOVER packets instead of the
generic (mostly empty) BOOTP BOOTREQUEST packets.
A pure BOOTP server would ignore the extra DHCP options in the DISCOVER
packet and would just reply with a BOOTREPLY packet, which we also
handle in the code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
net/dhcp: Allow receiving DHCP OFFER and ACK packets
In respone to a BOOTREQUEST packet a BOOTP server would answer with a BOOTREPLY
packet, which ends the conversation for good. DHCP uses a 4-way handshake,
where the initial server respone is an OFFER, which has to be answered with
REQUEST by the client again, only to be completed by an ACKNOWLEDGE packet
from the server.
Teach the grub_net_process_dhcp() function to deal with OFFER packets,
and treat ACK packets the same es BOOTREPLY packets.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The BOOTP RFC describes the boot file name and the server name as being part
of the integral BOOTP data structure, with some limits on the size of them.
DHCP extends this by allowing them to be separate DHCP options, which is more
flexible.
Teach the code dealing with those fields to check for those DHCP options first
and use this information, if provided. We fall back to using the BOOTP
information if those options are not used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently we have a global timeout for all network cards in the BOOTP/DHCP
discovery process.
Make this timeout a per-interface one, so better accommodate the upcoming
4-way DHCP handshake and to also cover the lease time limit a DHCP offer
will come with.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
net/dhcp: Make grub_net_process_dhcp() take an interface
Change the interface of the function dealing with incoming BOOTP packets
to take an interface instead of a card, to allow more fine per-interface
state (timeout, handshake state) later on.
Use the opportunity to clean up the code a bit.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
projects / thirdparty / grub.git / log
