Laine Stump [Thu, 27 Feb 2020 20:22:59 +0000 (15:22 -0500)]
qemu: new capabilities flag pcie-root-port.hotplug
This caps flag is set when the qemu binary supports the option
"hotplug" for pcie-root-port, ioh3420 (Intel pcie-root-port) and
xio3130-downstream (Intel pcie-downstream-port). If it's available,
it's possible to disable hotplugging/unplugging devices on a
particular port by adding ",hotplug=off" to the qemu device
commandline. This option first appears in qemu-5.0.0.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a guest with only one vcpu, when pinning the emulator in say CPU184
and the vcpu0 in CPU0 of the host, the user might expect that only
CPU0 and CPU184 of the host will be used by the guest.
The reality is that Libvirt takes some time to honor the emulator
and vcpu pinning, taking care of NUMA constraints first. This will
result in other CPUs of the host being potentially used by the
QEMU thread until the emulator/vcpu pinning is done. The user
then might be confused by the output of 'virsh cpu-stats' in this
scenario, showing around 200 microseconds of cycles being spent
in other CPUs.
Let's document this behavior, which is explained in detail in
Libvirt commit v5.0.0-199-gf136b83139, in the cputune section
of formatdomain.html.in.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Jim Fehlig [Tue, 7 Apr 2020 23:33:26 +0000 (17:33 -0600)]
xenconfig: Add support for max_event_channels
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jim Fehlig [Tue, 7 Apr 2020 23:15:04 +0000 (17:15 -0600)]
libxl: Add support for max_event_channels
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jim Fehlig [Tue, 7 Apr 2020 22:37:09 +0000 (16:37 -0600)]
conf: Add a new xenbus controller option for event channels
Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.
Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we use the "Virtualization Tools" product in Red Hat Bugzilla
for issue tracking upstream. This changes to point people to GitLab for
issue tracking.
Note that Bugzilla still has plenty of bugs present against libvirt.
Triaging these to determine what is still valid will be a separate
exercise. Bugzilla will be locked to prevent creation of new issues
meanwhile.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
docs: list settings required in creating a new git repo
The libvirt project has alot of git repositories, and they must all be
configured in the same way, more or less. This page documents the
settings changes that I have made in GitLab and GitHub when configuring
projects, both as a reminder for myself, and to help anyone else doing
the same in future. Also included is info about the repo mirroring on
the libvirt.org server.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
docs: add 'edit this page' link to footer of every page
To encourage contributors to make changes to the main website, add a
footer link to every page which links to the corresponding source file
in git. With gitlab, they are able to edit content directly in the web
browser and then submit a merge request. This gives a way to contribute
content that is arguably easier than our wiki which requires manual
account creation, while this will also benefit from maintainer review.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Jiri Denemark [Thu, 26 Mar 2020 20:55:14 +0000 (21:55 +0100)]
cpu_map: Distinguish Cascadelake-Server from Skylake-Server
The signatures of these two CPU model differ only in stepping as both
report family 6 and model 85. Skylake-Server uses stepping 4 or less and
Cascadelake-Server uses stepping 5..7.
Jiri Denemark [Thu, 26 Mar 2020 19:34:56 +0000 (20:34 +0100)]
cpu_x86: Add support for stepping part of CPU signature
CPU models defined in the cpu_map can use signature/@stepping attribute
to match a limited set of stepping numbers. The value is a bitmap for
bits 0..15 each corresponding to a single stepping value. For example,
stepping='4-6,9' will match 4, 5, 6, and 9. Omitting the attribute is
equivalent to stepping='0-15'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 26 Mar 2020 15:16:00 +0000 (16:16 +0100)]
cpu_x86: Replace 32b signatures in virCPUx86Model with a struct
The CPU models in our cpu_map define their signatures using separate
family and model numbers. Let's store the signatures in the same way in
our runtime representation of the cpu_map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 26 Mar 2020 14:14:41 +0000 (15:14 +0100)]
cpu_x86: Move and rename x86FormatSignatures
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place where all
related functions will be added and rename the function as
virCPUx86SignaturesFormat for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 26 Mar 2020 14:12:26 +0000 (15:12 +0100)]
cpu_x86: Move and rename x86ModelHasSignature
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesMatch for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 26 Mar 2020 14:07:42 +0000 (15:07 +0100)]
cpu_x86: Move and rename x86ModelCopySignatures
Later in this series the function will work on a newly introduced
virCPUx86Signatures structure. Let's move it to the place were all
related functions will be added and rename the function as
virCPUx86SignaturesCopy for easier review of the virCPUx86Signatures
patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Tue, 24 Mar 2020 22:35:44 +0000 (23:35 +0100)]
cpu_x86: Drop noTSX hint for incompatible CPUs
The hint was introduced a long time ago when broken TSX implementation
was found in Haswell and Broadwell CPUs. Since then many more CPUs with
TSX were introduced and and disabled due to TAA vulnerability.
Thus the hint is not very useful and I think removing it is a better
choice then updating it to cover all current noTSX models.
Bjoern Walk [Mon, 6 Apr 2020 13:13:27 +0000 (15:13 +0200)]
docs: documentation for virtio packed option
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Bjoern Walk [Mon, 6 Apr 2020 13:13:26 +0000 (15:13 +0200)]
qemu: command: support for virtio packed option
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Bjoern Walk [Mon, 6 Apr 2020 13:13:24 +0000 (15:13 +0200)]
qemu: capabilities: add 'packed' capability
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Bjoern Walk [Tue, 24 Mar 2020 11:34:28 +0000 (12:34 +0100)]
qemu: capabilities: update qemu-4.2 capabilities for s390x
Update s390x capabilities for QEMU 4.2 with the actual GA version for
QEMU and on the latest z15 machine.
This picks up the new blockdev capability, so we need to refresh a bunch
of test cases as well.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rafael Fonseca [Wed, 8 Apr 2020 12:12:54 +0000 (14:12 +0200)]
util: virdaemon: fix waiting for child processes
Unlike `waitpid`, `virProcessWait` only returns -1 (error) or 0
(success), so comparing that to `pid` will always be false and the
parent will report failure with:
error : main:851 : Failed to fork as daemon: No such file or directory
even though the grandchild process is succesfully running. Note that the
errno message is misleading: it was last set when trying to find a
restart state file.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com> Reported-by: Marcin Krol <hawk@tld-linux.org> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
This organizes the existing contents into sections, tweaks some parts
a bit and adds links to the pages where the contents that were ripped
out of hacking.rst now live, either inline or in the catch-all "further
reading" section depending on what makes more sense.
The result is that it's now possible to consume this page, which is
the entry point for new contributors, in just a few minutes, and then
drill down further based on factors such as the familiarity with the
open source development model or mail-based workflows.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These guidelines should already be familiar to people who have
contributed to other open source projects, so it doesn't make much
sense for them to be so prominent. Move them to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is a relatively lengthy part with lots of details, which many
people who are familiar with a mail-based development workflow will
already know and which will become obsolete once we move to GitLab.
Move the contents to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part contains a lot of useful tips, but presenting all of them
at the same time obfuscated the central message which is, 'make check'
and 'make syntax-check' must pass after each patch in a series. Let's
move them to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While it's good to have these rules written down for reference, they
apply exclusively to committers, who by definition are familiar with
the project and probably work on it daily, so there's no need to have
them front and center when a separate page will do.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most new contributors are probably going to modify existing code rather
than introducing all-new programs and scripts, and even when the latter
happen they'll hopefully get a feel for which programming languages are
considered acceptable for the project by looking at what's already in
the repo. Make this part less prominent by moving it to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part represents the biggest chunk of the existing hacking.rst, and
despite that its utility is very limited because 'make syntax-check'
already guarantees most of the rules are followed over time.
Until the glorious day we finally codify our coding style completely
into a configuration for a tool such as clang-format and thus no longer
need a plain English description of it, move this part to a separate
page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
github: enable lockdown of issues and merge requests
Libvirt uses GitHub as an automated read-only mirror. The goals were to
have a disaster recovery backup for libvirt.org, a way to make it easy
for people to clone their own private copy of libvirt Git, and finally
as a way to interact with apps like Travis.
The project description was set to a message telling people that we
don't respond to pull requests. This was quite a negative message to
potential contributors, and also did not give them any guidance about
the right way to submit to libvirt. Many also missed the description and
submitted issues or pull requests regardless.
It is possible to disable the issue tracker in GitHub, but there is no
way to disable merge requests. Disabling the issue tracker would also
leave the problem of users not being given any positive information
about where they should be reporting instead.
There is a fairly new 3rd party application built for GitHub that
provides a bot which auto-responds to both issues and merge requests,
closing and locking them, with a arbitrary comment:
https://github.com/apps/repo-lockdown
This commit adds a suitable configuration file for libvirt, which
tries to give a positive response to user's issue/pullreq and guide
them to the desired contribution path on GitLab.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Tue, 24 Mar 2020 17:07:19 +0000 (18:07 +0100)]
qemu: Make auto dump path generation embed driver aware
So far, libvirt generates the following path for automatic dumps:
$autoDumpPath/$id-$shortName-$timestamp
where $autoDumpPath is where libvirt stores dumps of guests (e.g.
/var/lib/libvirt/qemu/dump), $id is domain ID and $shortName is
shortened version of domain name. So for instance, the generated
path may look something like this:
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Mon, 23 Mar 2020 12:33:32 +0000 (13:33 +0100)]
qemu: Make memory path generation embed driver aware
So far, libvirt generates the following path for memory:
$memoryBackingDir/$id-$shortName/ram-nodeN
where $memoryBackingDir is the path where QEMU mmaps() memory for
the guest (e.g. /var/lib/libvirt/qemu/ram), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/var/lib/libvirt/qemu/ram/1-QEMUGuest/ram-node0
While in case of embed driver the following path would be
generated by default:
$root/lib/qemu/ram/1-QEMUGuest/ram-node0
which is not clashing with other embed drivers, we allow users to
override the default and have all embed drivers use the same
prefix. This can create clashing paths. Fortunately, we can reuse
the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetMemoryBackingBasePath().
The rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Fri, 20 Mar 2020 18:27:26 +0000 (19:27 +0100)]
qemu: Make hugepages path generation embed driver aware
So far, libvirt generates the following path for hugepages:
$mnt/libvirt/qemu/$id-$shortName
where $mnt is the mount point of hugetlbfs corresponding to
hugepages of desired size (e.g. /dev/hugepages), $id is domain ID
and $shortName is shortened version of domain name. So for
instance, the generated path may look something like this:
/dev/hugepages/libvirt/qemu/1-QEMUGuest
But this won't work with embed driver really, because if there
are two instances of embed driver, and they both want to start a
domain with the same name and with hugepages, both drivers will
generate the same path which is not desired. Fortunately, we can
reuse the approach for machined name generation
(v6.1.0-178-gc9bd08ee35) and include part of hash of the root in
the generated path.
Note, the important change is in qemuGetBaseHugepagePath(). The
rest is needed to pass driver around.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
What I haven't realized when writing this ^^ commit is that the
virQEMUDriver structure already stores the root directory path.
And since the pointer is immutable it can be accessed right from
the structure and thus there is no need to duplicate it in the
driver config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Mon, 23 Mar 2020 07:48:38 +0000 (08:48 +0100)]
qemuDomainGetMachineName: Access embeddedRoot from driver rather than cfg
The cfg->root is going away, therefore get the info right from
the driver structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Fri, 20 Mar 2020 18:52:32 +0000 (19:52 +0100)]
virDomainDriverGenerateMachineName: Factor out embed path hashing
The code that generates "qemu-embed-$hash" is going to be useful
in more places. Separate it out into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Fri, 20 Mar 2020 17:14:22 +0000 (18:14 +0100)]
conf: Move virDomainGenerateMachineName to hypervisor/
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Thu, 26 Mar 2020 09:46:41 +0000 (10:46 +0100)]
qemu: Drop two layers of nesting of memoryBackingDir
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Tue, 31 Mar 2020 15:42:43 +0000 (17:42 +0200)]
qemu: Drop virQEMUDriverIsPrivileged()
Introduced in v1.2.17-rc1~121, the assumption was that the
driver->privileged is immutable at the time but it might change
in the future. Well, it did not ever since. It is still immutable
variable. Drop the needless accessor then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Mon, 23 Mar 2020 08:55:54 +0000 (09:55 +0100)]
tests: Fix virQEMUDriverConfigNew() calling with respect to @root
The virQEMUDriverConfigNew() accepts path to root directory for
embed mode as an argument. If the argument is not NULL it uses
the passed value as prefix for some internal paths (e.g.
cfg->libDir). If it is NULL though, it looks if the other
argument, @privileged is true or false and generates internal
paths accordingly. But when calling the function from the test
suite, instead of passing NULL for @root, an empty string is
passed. Fortunately, this doesn't create a problem because in
both problematic cases the generated paths are "fixed" to point
somewhere into build dir or the code which is tested doesn't
access them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jim Fehlig [Fri, 3 Apr 2020 21:51:48 +0000 (15:51 -0600)]
libxl: fix crash when initializing driver
Commit 54a401af478 split out DriverConfigInit from DriverConfigNew, but
then called it a bit late from libxlStateInitialize. The cfg is used in
libxlDriverConfigLoadFile and when uninitialized results in a crash.
Calling DriverConfigInit immediately after DriverConfigNew fixes the
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
formatdomain.html.in: fix 'sockets' info in topology element
In the 'topology' element it is mentioned, regarding the sockets
value, "They refer to the total number of CPU sockets".
This is not accurate. What we're doing is calculating the number
of sockets per NUMA node, which can be checked in the current
implementation of virHostCPUGetInfoPopulateLinux(). Calculating
the total number of sockets would break the topology sanity
check nodes*sockets*cores*threads=online_cpus.
This documentation fix is important to avoid user confusion when
seeing the output of 'virsh capabilities' and expecting it to be
equal to the output of 'lscpu'. E.g in a Power 9 host this 'lscpu'
output:
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 160
On-line CPU(s) list: 0-159
Thread(s) per core: 4
Core(s) per socket: 20
Socket(s): 2
NUMA node(s): 2
Model: 2.2 (pvr 004e 1202)
Model name: POWER9, altivec supported
Both are correct, as long as we mention in the Libvirt documentation
that 'sockets' in the topology element represents the number of sockets
per NUMA node.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
tools: variables clean-up in libvirt-guests script
Redeclared variables in script functions marked as local.
Variables `guest_running` and `guests_shutting_down` in the
functions 'guest_is_on` and `check_guests_shutdown` were
untouched, as the functions returned values in these
variables.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu: move qemuValidateDomainDeviceDef() to qemu_validate.c
Now that all its helper functions are in qemu_validate.c, we can
move the function itself. The helpers can become static again since
they're all in the same file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemu: move qemuDomainDeviceDefValidateDisk() to qemu_validate.c
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemu: move qemuDomainChrDefValidate() to qemu_validate.c
qemuDomainChrDefValidate() has a lot of static helpers functions
that needed to be moved as well.
Other functions from qemuDomainDeviceDefValidate() that were
also moved:
- qemuValidateDomainSmartcardDef
- qemuValidateDomainRNGDef
- qemuValidateDomainRedirdevDef
- qemuValidateDomainWatchdogDef
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
projects / thirdparty / libvirt.git / log
