Jussi Kukkonen [Wed, 23 Mar 2016 08:59:07 +0000 (10:59 +0200)]
gio-module-cache: Add class for Gio modules
The new class uses gio-querymodules tool on postinst and postrm.
This regenerates the module cache which is useful to avoid loading
modules that are not needed at runtime: If a Gio module is not
listed in the cache file it will always get loaded.
* Add a postinst-intercept 'gio-module-cache': it runs
gio-querymodules using qemuwrapper. This is required because the tool
actually loads the modules to generate the cache.
* Add a gio-module-cache class that adds postinstall and postrm
scripts. In the sysroot population case use the new intercept.
* Inherit the new class in glib-2.0, glib-networking and gconf.
Jussi Kukkonen [Wed, 23 Mar 2016 08:59:06 +0000 (10:59 +0200)]
glib-2.0: Install gio-querymodules in main package
gio-querymodules should be used whenever new Gio modules are installed
(to regenerate the module cache) so it should be available by default.
Each multilib is going to need its own variant (because the tool
actually dlopens the modules when cache is generated), so it's
packaged as ${libexecdir}/${MLPREFIX}gio-querymodules
Ed Bartosh [Wed, 23 Mar 2016 09:09:18 +0000 (11:09 +0200)]
image.bbclass: run wicenv task only for wic images
Currently do_wicenv task is run for all images. However, its
result is used only to produce wic image. It's better to
run this task only for wic images. If another rootfs is
required to produce wic image, dependency to its do_wicenv
must be added to the wic image recipy.
Stopped running do_wicenv for all images. Added explicit
dependency to this task in wic-image-minimal recipe.
Ed Bartosh [Wed, 23 Mar 2016 11:24:33 +0000 (13:24 +0200)]
wic: fix type of no-table option
Type of --no-table option was incorrectly set in new wks parser.
It causes parser to require argument for this option, which makes
wic to fail with wks files that use --no-table:
Error: argument --no-table: expected one argument
Changed action parameter to 'store_true' to fix the issue.
Joshua Lock [Wed, 23 Mar 2016 15:37:59 +0000 (15:37 +0000)]
rootfs-postcommands: don't write manifest when IMAGE_MANIFEST empty
Return early in write_image_manifest () if the IMAGE_MANIFEST
variable is unset. This allows us to prevent writing of the
manifest where we prevent images being created for a recipe by
unsetting IMAGE_FSTYPES.
bitbake.conf: rename 'gobject-introspection-data' machine feature to 'qemu-usermode'
The new value is more general and better reflects what having the feature really means.
Introspection data, then, is built only if 'gobject-introspection-data' is in
DISTRO_FEATURES and 'qemu-usermode' is in MACHINE_FEATURES.
Khem Raj [Wed, 23 Mar 2016 22:09:32 +0000 (22:09 +0000)]
kernel.bbclass: consider .csp firmware files
Fixes kernels which package sb16 firmware e.g.
directories were installed but not shipped in any package:
/lib/firmware/sb16
/lib/firmware/sb16/ima_adpcm_playback.csp
/lib/firmware/sb16/ima_adpcm_init.csp
/lib/firmware/sb16/mulaw_main.csp
/lib/firmware/sb16/ima_adpcm_capture.csp
/lib/firmware/sb16/alaw_main.csp
Armin Kuster [Thu, 24 Mar 2016 01:21:51 +0000 (18:21 -0700)]
tzdata: update to 2016c
The 2016c release of the tz code and data is available. Its most urgent change is for Asia/Baku, where the update takes effect this weekend.
This release reflects the following changes, which were either circulated on the tz mailing list or are relatively minor technical or administrative changes:
Changes affecting future time stamps
Azerbaijan no longer observes DST. (Thanks to Steffen Thorsen.)
Chile reverts from permanent to seasonal DST. (Thanks to Juan
Correa for the heads-up, and to Tim Parenti for corrections.)
Guess that future transitions are August's and May's second
Saturdays at 24:00 mainland time. Also, call the period from
2014-09-07 through 2016-05-14 daylight saving time instead of
standard time, as that seems more appropriate now.
Changes affecting past time stamps
Europe/Kaliningrad and Europe/Vilnius changed from +03/+04 to
+02/+03 on 1989-03-26, not 1991-03-31. Europe/Volgograd changed
from +04/+05 to +03/+04 on 1988-03-27, not 1989-03-26.
(Thanks to Stepan Golosunov.)
Changes to commentary
Several updates and URLs for historical and proposed Russian changes.
(Thanks to Stepan Golosunov, Matt Johnson, and Alexander Krivenyshev.)
Alex Franco [Thu, 24 Mar 2016 01:39:11 +0000 (19:39 -0600)]
icecc.bbclass: replace icc with icecc
Make this class more clear and consistent, and avoid
confusion with the Intel C compiler (icc); the changes
affect function names, and calls to those functions
Alex Franco [Thu, 24 Mar 2016 01:39:09 +0000 (19:39 -0600)]
icecc.bbclass: add icc_is_allarch inherit check
Additional check for inheritance of allarch.bbclass, for when
checking that PACKAGE_ARCH == "all" is not enough to be sure
a recipe is "allarch"; e.g. nativesdk-buildtools type recipes
Nathan Rossi [Fri, 25 Mar 2016 09:07:12 +0000 (19:07 +1000)]
u-boot.inc: Add sub-dir support for SPL_BINARY
Add support for the SPL_BINARY variable to handle sub directories. In
some cases the SPL binary that needs to be deployed is only built to the
spl/ directory in U-Boot. So that a sub directory can be specified in
the SPL_BINARY variable, handle the case so that the deploy code uses
the basename of the path specified in SPL_BINARY.
Dengke Du [Fri, 25 Mar 2016 08:28:54 +0000 (04:28 -0400)]
quilt: run ptest as normal user
When the user is root, run quilt ptest, the faildiff.test failed.
Because in the faildiff.test, we drop the read permission of the
file test.txt, we can't "quilt refresh" as normal user, so we got
the following:
>~ .*diff:test\.txt: Permission denied
> Diff failed on file 'test.txt', aborting
But when the user is root, we can access the file, so we got the
following:
> Nothing in patch patchs/test.diff
So the faildiff.test was failed. We should create a normal user
to run the ptest in the run-ptest scripts to slove the problem.
Bill Randle [Mon, 21 Mar 2016 20:42:37 +0000 (13:42 -0700)]
add !meta-poky to .gitignore file
Another meta-yocto -> meta-poky transition item. Git complained
on commit that files in meta-poky could not be committed.
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bill Randle [Mon, 21 Mar 2016 18:24:48 +0000 (11:24 -0700)]
poky-sanity.bbclass: update conf/templateconf.cfg for existing installations
Updates of existing installations for the meta-yocto to meta-poky transition will
update the bblayers.conf file, but not the templateconf.cfg file. This
patch updates the template file to point to meta-poky/conf, if necessary.
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Mar 2016 16:11:56 +0000 (16:11 +0000)]
bitbake: fetch2: Handle lockfiles for file:// urls redirected to mirrors
We recently dropped lockfiles for file:// urls which in itself makes
sense.
If a file url redirects to something like an http:// mirror, we'd have
no lock taken for the original file and could race against others
trying to download the file. We therefore need to ensure there is a
lock taken in the mirror handling code.
This adds code to take such a lock, assuming it isn't the same lock
as the parent url.
Dave Lerner [Thu, 24 Mar 2016 12:12:11 +0000 (12:12 +0000)]
bitbake: toaster: get all dependents for pkg for removal
For customised image package removal change behavior.
From:
Only display the immediate dependents of the requested package
to remove, not the full dependent list, that is dependents of
dependents ...
Do not remove the displayed dependents, just notify the user
of the list.
To:
Display the complete dependent tree, traversing all reverse
dependencies starting from the package to be removed and then it's
dependents.
Change the modal dialog to note that all of these dependents will
be removed automatically.
Signed-off-by: Dave Lerner <dave.lerner@windriver.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Lerner [Thu, 24 Mar 2016 12:12:10 +0000 (12:12 +0000)]
bitbake: toaster: new customise package-remove modal dlg
For customised image package removal, show a different modal dialog that
lists ALL of the packages dependent on this package, with a Remove All
button - implying that all of the dependents will be removed.
Signed-off-by: Dave Lerner <dave.lerner@windriver.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Lerner [Thu, 24 Mar 2016 12:12:09 +0000 (12:12 +0000)]
bitbake: toaster: show full list of dependents to remove
When a package is to be removed, show the full list of packages that are
dependent on that package, telling user that these packages will also be
removed.
Signed-off-by: Dave Lerner <dave.lerner@windriver.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Wed, 23 Mar 2016 18:00:25 +0000 (11:00 -0700)]
libmad: remove use of obsolete _thumb over-ride
The _thumb over-ride was first used by the libmad recipe in 2006 [1],
but should have been removed in 2007, when the libmad recipe dropped
support for building for thumb [2].
Bruce Ashfield [Wed, 23 Mar 2016 15:09:04 +0000 (11:09 -0400)]
perf: package python modules into perf-python
The scripts that are part of perf require python and supporting modules.
The existing perf-pyton dependency only brought in core python, which
left us unable to actually execute the scripts on target.
With this additional runtime dependency, we can now execte the sample
analysis scripts when perf-scripting is availble.
This is a partial fix for [YOCTO #9069], since there are still scripts
looking for non-existent modules, and those will be dealt with in
future releases.
Bruce Ashfield [Wed, 23 Mar 2016 15:09:03 +0000 (11:09 -0400)]
perf: fix python scripts QA errors
Two QA warnings were being generated from perf, due to the location of
python scripts changing in the kernel build:
WARNING: perf-1.0-r9 do_package_qa: QA Issue:
/usr/libexec/perf-core/scripts/python/call-graph-from-postgresql.py contained
in package perf-python requires /usr/bin/python2, but no providers found in RDEPENDS_perf-python? [file-rdeps]
WARNING: QA Issue: /usr/libexec/perf-core/tests/attr.py_perf contained in package
perf requires /usr/bin/python, but no providers found in its RDEPENDS [file-rdeps]
By adding libexec dir to both the tests and scripts packaging, we get the
appropriate RDEPENDS on the packages that actually contain the python scripts
(without making perf-core depend on python).
We also tweak any python scripts to use '/usr/bin/env python', rather than a
version specific python, since it won't be provided and generate a QA error.
Integrating the following mainline commits for Apollo Lake/Broxton support:
568c4910b938 device property: always check for fwnode type bd2ac1821e91 device property: fallback to pset when gettng one string 44a76bd61eed ACPI / property: Extend fwnode_property_* to data-only subnodes 76f301877fab ACPI / property: Add support for data-only subnodes 95010db1e8f9 ACPI / property: Add routine for extraction of _DSD properties 3d257abeae4d device property: Return -ENXIO if there is no suitable FW interface 15f7db3cd1d0 device property: attach 'else if' to the proper 'if' effb3f07966e ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() 30aa0ae9ebf0 ACPI / scan: Parse _CCA and setup device coherency c8b4218d1523 ACPI / property: Define a symbol for PRP0001 3d20c5d27e99 ACPI / property: Refine consistency check for PRP0001 f753cbe35057 device property: avoid allocations of 0 length 6985a3d56431 device property: the secondary fwnode needs to depend on the primary 6c23f8de37ff device property: add spaces to PROPERTY_ENTRY_STRING macro 216b251c170c include/linux/property.h: fix build issues with gcc-4.4.4 c579da0b4812 device property: Take a copy of the property set e0c7ce6ec1eb device property: Fallback to secondary fwnode if primary misses the property a657577af2af device property: improve readability of macros 599f18f62daf device property: Add fwnode_property_match_string() 03599b274370 device property: helper macros for property entry creation 5247e6af02d6 device property: keep single value inplace c12af01cf0d4 device property: refactor built-in properties support 1390c21efa11 device property: rename helper functions
This enables the CONFIG_TMPFS_POSIX_ACL, which is wanted by things like
systemd. We also explicitly enable the features's dependencies and
options selected by the feature for clarity.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 23 Mar 2016 14:52:13 +0000 (07:52 -0700)]
linux-firmware: Collapse iwlwifi firmware blobs for 7260 and 7265
There are newer blobs that are not include since we currently package
blobs independtly, this will ensure that future updates are correctly
added to the packages.
Mariano Lopez [Tue, 22 Mar 2016 14:04:03 +0000 (14:04 +0000)]
archiver.bbclass: Fix tar name for git repositories
When archiving the original source, the git repositories have the name as
they are in the $DL_DIR plus the source revision; i.e.
"git.yoctoproject.org.linux-yocto-4.4.git.89419d8b90_dadb436904.tar.gz".
This change set the tar name to $PF.tar.gz instead, to have consistency with
the others archives created by the class.
Mariano Lopez [Tue, 22 Mar 2016 14:04:02 +0000 (14:04 +0000)]
archiver.bbclass: Fix gcc-source corner case
Bitbake couldn't add the task ar_configured when
trying to archive the configured source for
gcc-source-${PV} recipes. This is because the task
depended in the do_configure and this task doesn't
exist for gcc-source.
This fix allows to archive configured gcc-source recipe.
Mariano Lopez [Tue, 22 Mar 2016 14:04:01 +0000 (14:04 +0000)]
archiver.bbclass: Fix use of ARCHIVER_WORKDIR and ARCHIVER_OUTDIR
Currently do_unpack_and_patch() and do_ar_configured() are using
the ARCHIVER_OUTDIR as the ARCHIVER_WORKDIR, this lead to have
duplicated files inside the tars when using the archiver class
for patched and configured source.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit is objectively less maintained than util-linux or busybox, each
of which may supply its own mountpoint implementation. Adjust the
ALTERNATIVE_PRIORITY to select the sysvinit implementation as the last
resort.
Allow mountpoint to be installed separately from the rest of util-linux,
to conserve disk space, and to minimize the impact of switching to/from
this version of mountpoint.
Hongxu Jia [Tue, 22 Mar 2016 12:12:44 +0000 (08:12 -0400)]
gconf: fix buildpaths QA issue
The build paths come from debug mode, and GConf is effectively
unmaintained these days anyway. So explicitly disable debug
to fix build paths QA issue.
The minimum still keeps Glib check and assert which can result in
crashes if bad data is passed to the API.
Ross Burton [Tue, 22 Mar 2016 20:53:51 +0000 (20:53 +0000)]
python-pygobject: use Python 2 instead of Python 3
Ideally this would be an option but that means conditional inherits. For now
Python 2 is clearly the default Python in oe-core so switch to Python 2 instead
of 3.
This stops python3 being pulled inadvertently into builds, and appearing in
images that have ptest-pkgs installed (via dbus-test).
Bill Randle [Tue, 22 Mar 2016 17:23:18 +0000 (10:23 -0700)]
sanity.bbclass: check host tool dependencies on change in NATIVELSBSTRING
When a user upgrades their host distro, it may no longer have all the
required tools installed, but this won't be caught by bitbake resulting
in possible build errors. Rather than check for installed tools on every
startup, use the NATIVELSBSTRING change as indicator to rescan for host
tool dependencies. Store the NATIVELSBSTRING in the sanity_info file.
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 22 Mar 2016 17:06:07 +0000 (17:06 +0000)]
libunwind: Fix build with fstack-protector on musl
libunwind makery inserts -nostdlib during linking
which fails the build on musl when security flags are enabled
since it remove ssp from linking, so add them explicitly
to SECURITY_LDFLAGS
disable tests for musl targets, tests use obsolete
posix APIs e.g. getcontext
patchout x86_local_resume() on x86, gets a working
linunwind on x86, it seems that it wont work even
in glibc case but lets leave it as it is for glibc
and apply the patch only for musl
Brendan Le Foll [Tue, 22 Mar 2016 09:53:34 +0000 (09:53 +0000)]
package.bbclass: Treat .node files same as .so when checking what to strip
Typically in a node/npm compiled modules the module is named .node. This is a
binary module without a wrapper so it can actually be relatively large if
unstripped.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 22 Mar 2016 09:48:19 +0000 (02:48 -0700)]
bootimg.bbclass: fix settings for grub-efi.bbclass
Fixed:
- Found potential conflicted var LABELS ...
Set LABELS to "boot install" would build out broken images when build
vm + live together, use set_live_vm_vars() to fix the problem.
- Use ROOT and LABEL in boot-directdisk.bbclass and image-foo.bbclass,
they are not only used by syslinux.bbclass, but also grub-efi.bbclass,
add "SYSLINUX_" prefix would mislead users.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bill Randle [Mon, 21 Mar 2016 20:24:33 +0000 (13:24 -0700)]
sanity.bbclass cleanup
Limit search for a version var name to start at the beginning of a line,
otherwise, if the var name is used in a comment, that comment line will
be replaced, rather than the desired assignment line.
Move bblayer update message into function where it's actually updated,
rather than assuming all successful config file update are to the
bblayers.conf file.
Replace a stray tab with spaces for consistency.
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gstreamer1.0-plugins-bad: fix incorrect handling of Cflags in gstreamer-gl.pc file
Cflags had GL_CFLAGS appended, which contained full sysroot path to libdrm include;
generally such dependencies should be handled by pkgconfig's Requires facility.
It's unlikely that this .pc file is used by anything, but it was causing a QA error.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jens Rehsack [Wed, 16 Mar 2016 09:34:22 +0000 (10:34 +0100)]
tune-arm926ejs: Handle missing thumb suffix
When enabling tune for arm926ejs, poky optionally appends suffixes for
thumb and dsp support. Since sometimes arm926ejse (ARM code) and sometime
arm926ejste (thumb code) is used in PACKAGE_ARCH, allow both.
Dengke Du [Wed, 16 Mar 2016 02:49:13 +0000 (22:49 -0400)]
nativesdk-coreutils: a lot of warnings fixed
When we create nativesdk-coreutils, a lot of warnings appear,it
show many files can't find. Because in the coreutils recipe, it
didn't contain the do_install for the nativesdk, so when the
alternative system check the files in the following process, it
can't find the files. So we should add the do_install for the
nativesdk, change the function do_install_append_class-target() to
do_install_append() in the file:
meta/recipes-core/coreutils/coreutils_8.25.bb
in this way, the alternative system can find the files, the warnings
disappear.
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 10 Mar 2016 02:09:19 +0000 (18:09 -0800)]
runqemu-internal: split the code into functions
Use config_<machine> to split the code into separate functions, so that
different machines won't affect each other, and they will have a better
structure.
Robert Yang [Thu, 3 Mar 2016 03:37:45 +0000 (19:37 -0800)]
runqemu-internal: cleanup unsed code
* remove akita and spitz related code
They are not supported by runqemu anymore:
$ runqemu spitz
Error: unable to classify arg [spitz]
So remove related code.
* Remove checking of 256M for qemuarm, qemu can check it, for example:
$ runqemu qemuarm qemuparams="-m 1024"
[snip]
qemu: Too much memory for this machine: 1024 MB, maximum 256 MB
[snip]
Martin Jansa [Mon, 21 Mar 2016 10:01:28 +0000 (11:01 +0100)]
python(3): Disable tkinter
* restore changes from:
http://git.openembedded.org/openembedded-core/commit/?id=53ae544cfdac22c82af452b8c7ebe6664296bd9b
* which were shamelessly removed in upgrade to 2.7.9:
http://git.openembedded.org/openembedded-core/commit/?id=d4ad95f0d5f08891637c644e85b09da9c4585059
and then spread to python3 as well
* fixes following issues reported by test-dependencies
WARN: python3: python3-tkinter rdepends on glibc, but it isn't a build dependency?
WARN: python3: python3-tkinter rdepends on libpython3, but it isn't a build dependency?
WARN: python3: python3-tkinter rdepends on tcl-lib, but it isn't a build dependency?
WARN: python: python-tkinter rdepends on glibc, but it isn't a build dependency?
WARN: python: python-tkinter rdepends on libpython2, but it isn't a build dependency?
WARN: python: python-tkinter rdepends on tcl-lib, but it isn't a build dependency?
and following QA warnings in normal builds:
python-2.7.11: python-tkinter rdepends on tcl-lib, but it isn't a build dependency, missing tcl in DEPENDS or PACKAGECONFIG? [build-deps]
python-2.7.11: /usr/lib/python2.7/lib-dynload/_tkinter.so contained in package python-tkinter requires libtk8.6.so, but no providers found in RDEPENDS_python-tkinter? [file-rdeps]
python3-3.5.1: python3-tkinter rdepends on tcl-lib, but it isn't a build dependency, missing tcl in DEPENDS or PACKAGECONFIG? [build-deps]
python3-3.5.1: /usr/lib/python3.5/lib-dynload/_tkinter.cpython-35m-arm-linux-gnueabi.so contained in package python3-tkinter requires libtk8.6.so, but no providers found in RDEPENDS_python3-tkinter? [file-rdeps]
Robert Yang [Mon, 21 Mar 2016 09:25:49 +0000 (02:25 -0700)]
rpm: check _gpg_passphrase before ask for input
rpm always asked for pass phrasae when add signature, which made it
can't work non-interactively, this patch fix the problem. It will work
non-interactively if _gpg_passphrase is defined, and work as before if
not.
Paul Eggleton [Mon, 21 Mar 2016 05:14:07 +0000 (18:14 +1300)]
oe-publish-sdk: improve help output slightly
This was just copy-and-pasted from devtool - set a reasonable
description and tweak the sdk parameter help text.
Also add a copyright statement and drop the opening comment describing
the command-line syntax that duplicated the help output (with at least
one mistake in it).
Paul Eggleton [Mon, 21 Mar 2016 05:14:06 +0000 (18:14 +1300)]
oe-publish-sdk: drop SDK installer file from published output
We don't really need the SDK installer in the published output, for two
reasons:
1) The directory produced is for the consumption of devtool sdk-update,
and the installer isn't used by that at all
2) It wouldn't really make sense to point users at the update directory
to download the SDK installer because it contains a bunch of things
that aren't meant for manual download, so it wouldn't be very tidy.
Leaving the file present can mislead you into thinking the opposite of
both of the above.
Paul Eggleton [Mon, 21 Mar 2016 05:14:05 +0000 (18:14 +1300)]
devtool: add: create git repository if URL specified as positional argument
When we add from a fetched URL we are supposed to turn the resulting
source tree into a git repository (if it isn't already one). However, we
were using the older deprecated option name here instead of the
positional argument, so "devtool add -f <url>" resulted in the repo
being created but "devtool add <url>" didn't, which was wrong.
Also update the oe-selftest tests to check that this worked.
Paul Eggleton [Mon, 21 Mar 2016 05:14:04 +0000 (18:14 +1300)]
devtool: add: delete externalsrc files on npm recipe do_install
The npm class just installs whatever is in ${S}; if you're using
externalsrc in conjunction with it the symlinks (oe-workdir and oe-logs
by default) plus singletask.lock will end up in the final package, which
isn't really right. Introduce a variable so we know the path the files
will be installed into within npm.bbclass, and append to do_install
within the workspace bbappend to delete the files.
Paul Eggleton [Mon, 21 Mar 2016 05:14:02 +0000 (18:14 +1300)]
bitbake.conf: whitelist proxy variables in config hash
We don't need these variables incorporated in the config hash (i.e. we
don't need to reparse if they change).
This fixes an issue with the extensible SDK where the cache generated
at installation time not to be used afterwards due to the way we're
allowing through the proxy variables into the install environment (such
that they get set to "" if not set externally).
Paul Eggleton [Mon, 21 Mar 2016 05:14:01 +0000 (18:14 +1300)]
classes/populate_sdk_ext: parse metadata on minimal SDK install
Instead of skipping the build system preparation step within the
extensible SDK install process when SDK_EXT_TYPE is "minimal", run
bitbake -p so that the cache is populated ready for the first time
devtool is run.
Paul Eggleton [Mon, 21 Mar 2016 05:14:00 +0000 (18:14 +1300)]
devtool: sdk-install: add option to allow building from source
By default the sdk-install subcommand expects to restore the requested
items from sstate and fails if it can't. If the user is OK with building
from source, add a -s/--allow-build option to allow them to do that. In
the process, ensure we show the status output while we're installing.
Also add the missing header to the top of the file.
Paul Eggleton [Mon, 21 Mar 2016 05:10:58 +0000 (18:10 +1300)]
classes/distutils*: don't hide logs when setup script fails
We need to see the output of the setup script in the error message
because what we are having bbfatal print here doesn't completely
describe what went wrong, thus we should use bbfatal_log here and not
bbfatal.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
