In lwtunnel_{output|xmit}(), dev_xmit_recursion() may be called in
preemptible scope for PREEMPT kernels. This patch disables BHs before
calling dev_xmit_recursion(). BHs are re-enabled only at the end, since
we must ensure the same CPU is used for both dev_xmit_recursion_inc()
and dev_xmit_recursion_dec() (and any other recursion levels in some
cases) in order to maintain valid per-cpu counters.
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
[BUG]
When running btrfs/004 with 4K fs block size and 64K page size,
sometimes fsstress workload can take 100% CPU for a while, but not long
enough to trigger a 120s hang warning.
[CAUSE]
When such 100% CPU usage happens, btrfs_punch_hole_lock_range() is
always in the call trace.
One example when this problem happens, the function
btrfs_punch_hole_lock_range() got the following parameters:
lock_start = 4096, lockend = 20469
Then we calculate @page_lockstart by rounding up lock_start to page
boundary, which is 64K (page size is 64K).
For @page_lockend, we round down the value towards page boundary, which
result 0. Then since we need to pass an inclusive end to
filemap_range_has_page(), we subtract 1 from the rounded down value,
resulting in (u64)-1.
In the above case, the range is inside the same page, and we do not even
need to call filemap_range_has_page(), not to mention to call it with
(u64)-1 at the end.
This behavior will cause btrfs_punch_hole_lock_range() to busy loop
waiting for irrelevant range to have its pages dropped.
[FIX]
Calculate @page_lockend by just rounding down @lockend, without
decreasing the value by one. So @page_lockend will no longer overflow.
Then exit early if @page_lockend is no larger than @page_lockstart.
As it means either the range is inside the same page, or the two pages
are adjacent already.
Finally only decrease @page_lockend when calling filemap_range_has_page().
Fixes: 0528476b6ac7 ("btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.
Fixes: 99d6bdf33877 ("cpufreq: add support for CPU DVFS based on SCMI message protocol") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org Fixes: 209376ed2a84 ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Aishwarya TCV <aishwarya.tcv@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution")
cause out of bounds access in arrays of sc7280 driver data (e.g. in case
of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()).
Redefine LPASS_MAX_PORTS to consider the maximum possible port id for
q6dsp as sc7280 driver utilizes some of those values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 77d0ffef793d ("ASoC: qcom: Add macro for lpass DAI id's max limit") Cc: stable@vger.kernel.org # v6.0+ Suggested-by: Mikhail Kobuk <m.kobuk@ispras.ru> Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Evgeny Pimenov <pimenoveu12@gmail.com> Link: https://patch.msgid.link/20250401204058.32261-1-pimenoveu12@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Existing code base only supports one display port, this patch adds
support upto 8 display ports. This support is required to allow platforms
like X13s which have 3 display ports, and some of the Qualcomm SoCs
there are upto 7 Display ports.
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Replace assignment of PCI domain IDs from atomic_inc_return() to
ida_alloc().
Use two IDAs, one for static domain allocations (those which are defined in
device tree) and second for dynamic allocations (all other).
During removal of root bus / host bridge, also release the domain ID. The
released ID can be reused again, for example when dynamically loading and
unloading native PCI host bridge drivers.
This change also allows to mix static device tree assignment and dynamic by
kernel as all static allocations are reserved in dynamic pool.
[bhelgaas: set "err" if "bus->domain_nr < 0"] Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: 804443c1f278 ("PCI: Fix reference leak in pci_register_host_bridge()") Signed-off-by: Sasha Levin <sashal@kernel.org>
In of_resolve_phandles(), refcount of device node @local_fixups will be
increased if the for_each_child_of_node() exits early, but nowhere to
decrease the refcount, so cause refcount leakage for the node.
Fix by using __free() on @local_fixups.
Fixes: da56d04c806a ("of/resolver: Switch to new local fixups format.") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-9-93e3a2659aa7@quicinc.com
[robh: Use __free() instead] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. Correct the
implementation by configuring HP as a fixed clock source instead of a
MUX.
The `CPG_PL6_ETH_SSEL' register, which is available on the RZ/G2UL SoC,
is not present on the RZ/Five SoC, necessitating this change.
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Add clk_hw_data struct that keeps the core part of the clock data.
sd_hw_data embeds a member of type struct clk_hw_data along with other
members (in the next commits). This commit prepares the field for
refactoring the SD MUX clock driver.
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230308073945.2336302-7-u.kleine-koenig@pengutronix.de
Stable-dep-of: 276822a00db3 ("backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The ad7768-1 ADC output code is two's complement, meaning that the voltage
conversion result is a signed value.. Since the value is a 24 bit one,
stored in a 32 bit variable, the sign should be extended in order to get
the correct representation.
Also the channel description has been updated to signed representation,
to match the ADC specifications.
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
mv88e6xxx currently assumes that switch equipped with internal phys have
those phys mapped contiguously starting from port 0 (see
mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
integrated PHYs available on ports 1 to 8
To properly support this offset, add a new field to allow specifying an
internal PHYs layout. If field is not set, default layout is assumed (start
at port 0)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family") Signed-off-by: Sasha Levin <sashal@kernel.org>
Since this function is a simple helper, we do not need to pass a full
dsa_switch structure, we can directly pass the mv88e6xxx_chip structure.
Doing so will allow to share this function with any other function
not manipulating dsa_switch structure but needing info about number of
internal phys
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family") Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family") Signed-off-by: Sasha Levin <sashal@kernel.org>
irq_find_mapping() does not need irq_dispose_mapping(), only
irq_create_mapping() does.
Calling irq_dispose_mapping() from mv88e6xxx_g2_irq_mdio_free() and from
the error path of mv88e6xxx_g2_irq_mdio_setup() effectively means that
the mdiobus logic (for internal PHY interrupts) is disposing of a
hwirq->virq mapping which it is not responsible of (but instead, the
function pair mv88e6xxx_g2_irq_setup() + mv88e6xxx_g2_irq_free() is).
With the current code structure, this isn't such a huge problem, because
mv88e6xxx_g2_irq_mdio_free() is called relatively close to the real
owner of the IRQ mappings:
and the switch isn't 'live' in any way such that it would be able of
generating interrupts at this point (mv88e6xxx_unregister_switch() has
been called).
However, there is a desire to split mv88e6xxx_mdios_unregister() and
mv88e6xxx_g2_irq_free() such that mv88e6xxx_mdios_unregister() only gets
called from mv88e6xxx_teardown(). This is much more problematic, as can
be seen below.
In a cross-chip scenario (say 3 switches d0032004.mdio-mii:10, d0032004.mdio-mii:11 and d0032004.mdio-mii:12 which form a single DSA
tree), it is possible to unbind the device driver from a single switch
(say d0032004.mdio-mii:10).
When that happens, mv88e6xxx_remove() will be called for just that one
switch, and this will call mv88e6xxx_unregister_switch() which will tear
down the entire tree (calling mv88e6xxx_teardown() for all 3 switches).
Assuming mv88e6xxx_mdios_unregister() was moved to mv88e6xxx_teardown(),
at this stage, all 3 switches will have called irq_dispose_mapping() on
their mdiobus virqs.
When we bind again the device driver to d0032004.mdio-mii:10,
mv88e6xxx_probe() is called for it, which calls dsa_register_switch().
The DSA tree is now complete again, and mv88e6xxx_setup() is called for
all 3 switches.
Also assuming that mv88e6xxx_mdios_register() is moved to
mv88e6xxx_setup() (the 2 assumptions go together), at this point, d0032004.mdio-mii:11 and d0032004.mdio-mii:12 don't have an IRQ mapping
for the internal PHYs anymore, as they've disposed of it in
mv88e6xxx_teardown(). Whereas switch d0032004.mdio-mii:10 has re-created
it, because its code path comes from mv88e6xxx_probe().
Simply put, this change prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.
Also, the code being deleted was partially wrong anyway (in a way which
may have hidden this other issue). mv88e6xxx_g2_irq_mdio_setup()
populates bus->irq[] starting with offset chip->info->phy_base_addr, but
the teardown path doesn't apply that offset too. So it disposes of virq
0 for phy = [ 0, phy_base_addr ).
All switch families have phy_base_addr = 0, except for MV88E6141 and
MV88E6341 which have it as 0x10. I guess those families would have
happened to work by mistake in cross-chip scenarios too.
I'm deleting the body of mv88e6xxx_g2_irq_mdio_free() but leaving its
call sites and prototype in place. This is because, if we ever need to
add back some teardown procedure in the future, it will be perhaps
error-prone to deduce the proper call sites again. Whereas like this,
no extra code should get generated, it shouldn't bother anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family") Signed-off-by: Sasha Levin <sashal@kernel.org>
Variable allocated by charlcd_alloc() should be released
by charlcd_free(). The following patch changed kfree() to
charlcd_free() to fix an API misuse.
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 9b98a7d2e5f4 ("auxdisplay: hd44780: Fix an API misuse in hd44780.c") Signed-off-by: Sasha Levin <sashal@kernel.org>
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
The sample code for using cpumask used the wrong field for the
__get_cpumask() helper. It used "cpus" which is the bitmask (but would
still give a proper example) instead of the "cpum" that was there to be
used.
Although it produces the same output, fix it, because it's an example and
is confusing in how to properly use the cpumask() macro.
The trace events have a __bitmask field that can be used for anything
that requires bitmasks. Although currently it is only used for CPU
masks, it could be used in the future for any type of bitmasks.
There is some user space tooling that wants to know if a field is a CPU
mask and not just some random unsigned long bitmask. Introduce
"__cpumask()" helper functions that work the same as the current
__bitmask() helpers but displays in the format file:
The main difference is the type. Instead of "unsigned long" it is
"cpumask_t *". Note, this type field needs to be a real type in the
__dynamic_array() logic that both __cpumask and__bitmask use, but the
comparison field requires it to be a scalar type whereas cpumask_t is a
structure (non-scalar). But everything works when making it a pointer.
Valentin added changes to remove the need of passing in "nr_bits" and the
__cpumask will always use nr_cpumask_bits as its size.
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
There is another VivoBook model which built-in mic got broken recently
by the fix of the pin sort. Apply the correct quirk
ALC256_FIXUP_ASUS_MIC_NO_PRESENCE to this model for addressing the
regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Closes: https://lore.kernel.org/Z95s5T6OXFPjRnKf@eldamar.lan Link: https://patch.msgid.link/20250402074208.7347-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ Salvatore Bonaccorso: Update for context change due to missing other
quirk entries in the struct snd_pci_quirk alc269_fixup_tbl ] Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While iterating all_mddevs list from md_notify_reboot() and md_exit(),
list_for_each_entry_safe is used, and this can race with deletint the
next mddev, causing UAF:
t1:
spin_lock
//list_for_each_entry_safe(mddev, n, ...)
mddev_get(mddev1)
// assume mddev2 is the next entry
spin_unlock
t2:
//remove mddev2
...
mddev_free
spin_lock
list_del
spin_unlock
kfree(mddev2)
mddev_put(mddev1)
spin_lock
//continue dereference mddev2->all_mddevs
The old helper for_each_mddev() actually grab the reference of mddev2
while holding the lock, to prevent from being freed. This problem can be
fixed the same way, however, the code will be complex.
Hence switch to use list_for_each_entry, in this case mddev_put() can free
the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor
out a helper mddev_put_locked() to fix this problem.
Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-raid/20250220124348.845222-1-yukuai1@huaweicloud.com Fixes: f26514342255 ("md: stop using for_each_mddev in md_notify_reboot") Fixes: 16648bac862f ("md: stop using for_each_mddev in md_exit") Reported-and-tested-by: Guillaume Morin <guillaume@morinfr.org> Closes: https://lore.kernel.org/all/Z7Y0SURoA8xwg7vn@bender.morinfr.org/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
[skip md_seq_show() that is not exist] Signed-off-by: Yu Kuai <yukuai3@huawei.com> Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synchronize the declaration of ds1287_set_base_clock() between
cevt-ds1287.c and ds1287.h.
Fix follow error with gcc-14 when -Werror:
arch/mips/kernel/cevt-ds1287.c:21:5: error: conflicting types for ‘ds1287_set_base_clock’; have ‘int(unsigned int)’
21 | int ds1287_set_base_clock(unsigned int hz)
| ^~~~~~~~~~~~~~~~~~~~~
In file included from arch/mips/kernel/cevt-ds1287.c:13:
./arch/mips/include/asm/ds1287.h:11:13: note: previous declaration of ‘ds1287_set_base_clock’ with type ‘void(unsigned int)’
11 | extern void ds1287_set_base_clock(unsigned int clock);
| ^~~~~~~~~~~~~~~~~~~~~
make[7]: *** [scripts/Makefile.build:207: arch/mips/kernel/cevt-ds1287.o] Error 1
make[6]: *** [scripts/Makefile.build:465: arch/mips/kernel] Error 2
make[6]: *** Waiting for unfinished jobs....
Declare which_prom() as static to suppress gcc compiler warning that
'missing-prototypes'. This function is not intended to be called
from other parts.
Fix follow error with gcc-14 when -Werror:
arch/mips/dec/prom/init.c:45:13: error: no previous prototype for ‘which_prom’ [-Werror=missing-prototypes]
45 | void __init which_prom(s32 magic, s32 *prom_vec)
| ^~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:207: arch/mips/dec/prom/init.o] Error 1
make[5]: *** [scripts/Makefile.build:465: arch/mips/dec/prom] Error 2
make[5]: *** Waiting for unfinished jobs....
ENGINE API has been deprecated since OpenSSL version 3.0 [1].
Distros have started dropping support from headers and in future
it will likely disappear also from library.
It has been superseded by the PROVIDER API, so use it instead
for OPENSSL MAJOR >= 3.
ERR_get_error_line() is deprecated since OpenSSL 3.0.
Use ERR_peek_error_line() instead, and combine display_openssl_errors()
and drain_openssl_errors() to a single function where parameter decides
if it should consume errors silently.
Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case of apply_to_existing_page_range(), apply_to_pte_range() is
reached with 'create' set to false. When !create, the loop over the PTE
page table is broken.
apply_to_pte_range() will only move to the next PTE entry if 'create' is
true or if the current entry is not pte_none().
This means that the user of apply_to_existing_page_range() will not have
'fn' called for any entries after the first pte_none() in the PTE page
table.
Fix the loop logic in apply_to_pte_range().
There are no known runtime issues from this, but the fix is trivial enough
for stable@ even without a known buggy user.
Link: https://lkml.kernel.org/r/20250409094043.1629234-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: be1db4753ee6 ("mm/memory.c: add apply_to_existing_page_range() helper") Cc: Daniel Axtens <dja@axtens.net> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:
The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.
Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.
Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new field 'online' is added to blkg_policy_data to fix following
2 problem:
1) In blkcg_activate_policy(), if pd_alloc_fn() with 'GFP_NOWAIT'
failed, 'queue_lock' will be dropped and pd_alloc_fn() will try again
without 'GFP_NOWAIT'. In the meantime, remove cgroup can race with
it, and pd_offline_fn() will be called without pd_init_fn() and
pd_online_fn(). This way null-ptr-deference can be triggered.
2) In order to synchronize pd_free_fn() from blkg_free_workfn() and
blkcg_deactivate_policy(), 'list_del_init(&blkg->q_node)' will be
delayed to blkg_free_workfn(), hence pd_offline_fn() can be called
first in blkg_destroy(), and then blkcg_deactivate_policy() will
call it again, we must prevent it.
The new field 'online' will be set after pd_online_fn() and will be
cleared after pd_offline_fn(), in the meantime pd_offline_fn() will only
be called if 'online' is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230119110350.2287325-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf progs can be attached to kernel functions, and the attached functions
can take different parameters or return different return values. If
prog attached to one kernel function tail calls prog attached to another
kernel function, the ctx access or return value verification could be
bypassed.
For example, if prog1 is attached to func1 which takes only 1 parameter
and prog2 is attached to func2 which takes two parameters. Since verifier
assumes the bpf ctx passed to prog2 is constructed based on func2's
prototype, verifier allows prog2 to access the second parameter from
the bpf ctx passed to it. The problem is that verifier does not prevent
prog1 from passing its bpf ctx to prog2 via tail call. In this case,
the bpf ctx passed to prog2 is constructed from func1 instead of func2,
that is, the assumption for ctx access verification is bypassed.
Another example, if BPF LSM prog1 is attached to hook file_alloc_security,
and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier
knows the return value rules for these two hooks, e.g. it is legal for
bpf_lsm_audit_rule_known to return positive number 1, and it is illegal
for file_alloc_security to return positive number. So verifier allows
prog2 to return positive number 1, but does not allow prog1 to return
positive number. The problem is that verifier does not prevent prog1
from calling prog2 via tail call. In this case, prog2's return value 1
will be used as the return value for prog1's hook file_alloc_security.
That is, the return value rule is bypassed.
This patch adds restriction for tail call to prevent such bypasses.
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
The dealloc flag may be cleared and the extent won't reach the disk in
cow_file_range when errors path. The reserved qgroup space is freed in
commit 30479f31d44d ("btrfs: fix qgroup reserve leaks in
cow_file_range"). However, the length of untouched region to free needs
to be adjusted with the correct remaining region size.
Fixes: 30479f31d44d ("btrfs: fix qgroup reserve leaks in cow_file_range") CC: stable@vger.kernel.org # 6.11+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Haisu Wang <haisuwang@tencent.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use TCP_Server_Info::origin_fullpath instead of cifs_tcon::tree_name
when building source paths for automounts as it will be useful for
domain-based DFS referrals where the connections and referrals would
get either re-used from the cache or re-created when chasing the dfs
link.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
[apanyaki: backport to v6.1-stable] Signed-off-by: Andrew Paniakin <apanyaki@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
[ Drop the parentheses clean-up since the parentheses was introduced by c8efcc786146 ("ksmbd: add support for durable handles v1/v2") in v6.9
Minor context change fixed ] Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions nvmet_fc_iodnum() and nvmet_fc_fodnum() are currently
unutilized.
Following commit c53432030d86 ("nvme-fabrics: Add target support for FC
transport"), which introduced these two functions, they have not been
used at all in practice.
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b4352c ("landlock: Enable user space to infer supported features") Cc: Günther Noack <gnoack@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
Coverity report OVERRUN warning. There are
only max_links elements within dc->links. link
count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31.
[How]
Make sure link count less than max_links.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Minor conflict resolved due to code context change. And the macro MAX_LINKS
is introduced by Commit 60df5628144b ("drm/amd/display: handle invalid
connector indices") after 6.10. So here we still use the original array
length MAX_PIPES * 2] Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If do_zone_finish() is called with a filesystem that has missing devices
(e.g. a RAID file system mounted in degraded mode) it is accessing the
btrfs_device::zone_info pointer, which will not be set if the device
in question is missing.
Check if the device is present (by checking if it has a valid block device
pointer associated) and if not, skip zone finishing for it.
Fixes: 4dcbb8ab31c1 ("btrfs: zoned: make zone finishing multi stripe capable") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If btrfs_zone_activate() is called with a filesystem that has missing
devices (e.g. a RAID file system mounted in degraded mode) it is accessing
the btrfs_device::zone_info pointer, which will not be set if the device in
question is missing.
Check if the device is present (by checking if it has a valid block
device pointer associated) and if not, skip zone activation for it.
Fixes: f9a912a3c45f ("btrfs: zoned: make zone activation multi stripe capable") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the buffered write path, the dirty page owns the qgroup reserve until
it creates an ordered_extent.
Therefore, any errors that occur before the ordered_extent is created
must free that reservation, or else the space is leaked. The fstest
generic/475 exercises various IO error paths, and is able to trigger
errors in cow_file_range where we fail to get to allocating the ordered
extent. Note that because we *do* clear delalloc, we are likely to
remove the inode from the delalloc list, so the inodes/pages to not have
invalidate/launder called on them in the commit abort path.
This results in failures at the unmount stage of the test that look like:
Cases 2 and 3 in the out_reserve path both pertain to this type of leak
and must free the reserved qgroup data. Because it is already an error
path, I opted not to handle the possible errors in
btrfs_free_qgroup_data.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
[Minor conflict resolved due to code context change.] Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'nargs' and 'nret' locals come directly from a user-supplied
buffer and are used as indexes into a small stack-based array and as
inputs to copy_to_user() after they are subject to bounds checks.
Use array_index_nospec() after the bounds checks to clamp these values
for speculative execution.
Calling C code via a different mapping than it was linked at is
problematic, because the compiler assumes that RIP-relative and absolute
symbol references are interchangeable. GCC in particular may use
RIP-relative per-CPU variable references even when not using -fpic.
So call xen_prepare_pvh() via its kernel virtual mapping on x86_64, so
that those RIP-relative references produce the correct values. This
matches the pre-existing behavior for i386, which also invokes
xen_prepare_pvh() via the kernel virtual mapping before invoking
startup_32 with paging disabled again.
If the warning mode with disabled mitigation mode is used, then on each
CPU where the split lock occurred detection will be disabled in order to
make progress and delayed work will be scheduled, which then will enable
detection back.
Now it turns out that all CPUs use one global delayed work structure.
This leads to the fact that if a split lock occurs on several CPUs
at the same time (within 2 jiffies), only one CPU will schedule delayed
work, but the rest will not.
The return value of schedule_delayed_work_on() would have shown this,
but it is not checked in the code.
A diagram that can help to understand the bug reproduction:
- sld_update_msr() enables/disables SLD on both CPUs on the same core
- schedule_delayed_work_on() internally checks WORK_STRUCT_PENDING_BIT.
If a work has the 'pending' status, then schedule_delayed_work_on()
will return an error code and, most importantly, the work will not
be placed in the workqueue.
Let's say we have a multicore system on which split_lock_mitigate=0 and
a multithreaded application is running that calls splitlock in multiple
threads. Due to the fact that sld_update_msr() affects the entire core
(both CPUs), we will consider 2 CPUs from different cores. Let the 2
threads of this application schedule to CPU0 (core 0) and to CPU 2
(core 1), then:
| || |
| CPU 0 (core 0) || CPU 2 (core 1) |
|_________________________________||___________________________________|
| || |
| 1) SPLIT LOCK occured || |
| || |
| 2) split_lock_warn() || |
| || |
| 3) sysctl_sld_mitigate == 0 || |
| (work = &sl_reenable) || |
| || |
| 4) schedule_delayed_work_on() || |
| (reenable will be called || |
| after 2 jiffies on CPU 0) || |
| || |
| 5) disable SLD for core 0 || |
| || |
| ------------------------- || |
| || |
| || 6) SPLIT LOCK occured |
| || |
| || 7) split_lock_warn() |
| || |
| || 8) sysctl_sld_mitigate == 0 |
| || (work = &sl_reenable, |
| || the same address as in 3) ) |
| || |
| 2 jiffies || 9) schedule_delayed_work_on() |
| || fials because the work is in |
| || the pending state since 4). |
| || The work wasn't placed to the |
| || workqueue. reenable won't be |
| || called on CPU 2 |
| || |
| || 10) disable SLD for core 0 |
| || |
| || From now on SLD will |
| || never be reenabled on core 1 |
| || |
| ------------------------- || |
| || |
| 11) enable SLD for core 0 by || |
| __split_lock_reenable || |
| || |
If the application threads can be scheduled to all processor cores,
then over time there will be only one core left, on which SLD will be
enabled and split lock will be able to be detected; and on all other
cores SLD will be disabled all the time.
Most likely, this bug has not been noticed for so long because
sysctl_sld_mitigate default value is 1, and in this case a semaphore
is used that does not allow 2 different cores to have SLD disabled at
the same time, that is, strictly only one work is placed in the
workqueue.
In order to fix the warning mode with disabled mitigation mode,
delayed work has to be per-CPU. Implement it.
Fixes: 727209376f49 ("x86/split_lock: Add sysctl to control the misery mode") Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20250115131704.132609-1-davydov-max@yandex-team.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Wed, 16 Apr 2025 20:24:39 +0000 (14:24 -0600)]
mm: Fix is_zero_page() usage in try_grab_page()
The backport of upstream commit c8070b787519 ("mm: Don't pin ZERO_PAGE
in pin_user_pages()") into v6.1.130 noted below in Fixes does not
account for commit 0f0892356fa1 ("mm: allow multiple error returns in
try_grab_page()"), which changed the return value of try_grab_page()
from bool to int. Therefore returning 0, success in the upstream
version, becomes an error here. Fix the return value.
Fixes: 476c1dfefab8 ("mm: Don't pin ZERO_PAGE in pin_user_pages()") Link: https://lore.kernel.org/all/Z_6uhLQjJ7SSzI13@eldamar.lan Reported-by: Salvatore Bonaccorso <carnil@debian.org> Reported-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two variables that indicate the interrupt type to be used
in the next test execution, "irq_type" as global and "test->irq_type".
The global is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
The type set in this function isn't reflected in the global "irq_type",
so ioctl(PCITEST_GET_IRQTYPE) returns the previous type.
As a result, the wrong type is displayed in old version of "pcitest"
as follows:
- Result of running "pcitest -i 0"
SET IRQ TYPE TO LEGACY: OKAY
- Result of running "pcitest -I"
GET IRQ TYPE: MSI
Whereas running the new version of "pcitest" in kselftest results in an
error as follows:
# RUN pci_ep_basic.LEGACY_IRQ_TEST ...
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1)
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type
Fix this issue by propagating the current type to the global "irq_type".
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IP(V6)_FREEBIND and IP(V6)_TRANSPARENT support for the setsockopt part
has been added a while ago, but it looks like the get part got
forgotten. It should have been present as a way to verify a setting has
been set as expected, and not to act differently from TCP or any other
socket types.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover these specific getsockopt(), that seems
safe.
Fixes: c9406a23c116 ("mptcp: sockopt: add SOL_IP freebind & transparent options") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-3-122dbb249db3@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflict in sockopt.c due to commit e08d0b3d1723 ("inet: implement
lockless IP_TOS") not being in this version. The conflict is in the
context and the modification can still be applied in
mptcp_getsockopt_v4() after the IP_TOS case.
Also, get the values without 'inet_test_bit()' like it was done in
this version. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Since acpi_processor_notify() can be called before registering a cpufreq
driver or even in cases when a cpufreq driver is not registered at all,
cpufreq_update_limits() needs to check if a cpufreq driver is present
and prevent it from being unregistered.
For this purpose, make it call cpufreq_cpu_get() to obtain a cpufreq
policy pointer for the given CPU and reference count the corresponding
policy object, if present.
Fixes: 5a25e3f7cc53 ("cpufreq: intel_pstate: Driver-specific handling of _PPC updates") Closes: https://lore.kernel.org/linux-acpi/Z-ShAR59cTow0KcR@mail-itl Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/1928789.tdWV9SEqCh@rjwysocki.net
[do not use __free(cpufreq_cpu_put) in a backport] Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c132273 ("KVM: arm64: Save/restore SVE state for nVHE") Fixes: 2e3cf82063a00ea0 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
[ v6.6 lacks pKVM saving of host SVE state, pull in discovery of maximum
host VL separately -- broonie ] Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.
Reported-by: James Clark <james.clark@linaro.org> Fixes: 5294afdbf45a ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch") Signed-off-by: Fuad Tabba <tabba@google.com> Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared hyp switch header has a number of static functions which
might not be used by all files that include the header, and when unused
they will provoke compiler warnings, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function]
| 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function]
| 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function]
| 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function]
| 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function]
| 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~
Mark these functions as 'inline' to suppress this warning. This
shouldn't result in any functional change.
At the same time, avoid the use of __alias() in the header and alias
kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to
kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest
of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also
marked as 'inline'.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.
This logic was originally introduced in commit:
861262ab86270206 ("KVM: arm64: Handle SME host state when running guests")
At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.
That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.
The issue above was incidentally fixed by commit:
375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")
That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86270206.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie] Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic is
currently redundant.
The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when
returning to the host, permitting host kernel usage of SVE.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SVE trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
[Rework for refactoring of where the flags are stored -- broonie] Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several problems with the way hyp code lazily saves the host's
FPSIMD/SVE state, including:
* Host SVE being discarded unexpectedly due to inconsistent
configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to
result in QEMU crashes where SVE is used by memmove(), as reported by
Eric Auger:
https://issues.redhat.com/browse/RHEL-68997
* Host SVE state is discarded *after* modification by ptrace, which was an
unintentional ptrace ABI change introduced with lazy discarding of SVE state.
* The host FPMR value can be discarded when running a non-protected VM,
where FPMR support is not exposed to a VM, and that VM uses
FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR
before unbinding the host's FPSIMD/SVE/SME state, leaving a stale
value in memory.
Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME
state when loading a vCPU such that KVM does not need to save any of the
host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is
removed and the necessary call to fpsimd_save_and_flush_cpu_state() is
placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr'
should not be used, they are set to NULL; all uses of these will be
removed in subsequent patches.
Historical problems go back at least as far as v5.17, e.g. erroneous
assumptions about TIF_SVE being clear in commit:
8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving")
... and so this eager save+flush probably needs to be backported to ALL
stable trees.
Fixes: 93ae6b01bafee8fa ("KVM: arm64: Discard any SVE state when entering KVM guests") Fixes: 8c845e2731041f0f ("arm64/sve: Leave SVE enabled on syscall if we don't context switch") Fixes: ef3be86021c3bdf3 ("KVM: arm64: Add save/restore support for FPMR") Reported-by: Eric Auger <eauger@redhat.com> Reported-by: Wilco Dijkstra <wilco.dijkstra@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Fuad Tabba <tabba@google.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-2-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
[ Mark: Handle vcpu/host flag conflict, remove host_data_ptr() ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we are explicitly telling the host FP code which register state
it needs to save we can remove the manipulation of TIF_SVE from the KVM
code, simplifying it and allowing us to optimise our handling of normal
tasks. Remove the manipulation of TIF_SVE from KVM and instead rely on
to_save to ensure we save the correct data for it.
There should be no functional or performance impact from this change.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-5-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid needlessly saving and restoring the guest registers KVM
relies on the host FPSMID code to save the guest registers when we context
switch away from the guest. This is done by binding the KVM guest state to
the CPU on top of the task state that was originally there, then carefully
managing the TIF_SVE flag for the task to cause the host to save the full
SVE state when needed regardless of the needs of the host task. This works
well enough but isn't terribly direct about what is going on and makes it
much more complicated to try to optimise what we're doing with the SVE
register state.
Let's instead have KVM pass in the register state it wants saving when it
binds to the CPU. We introduce a new FP_STATE_CURRENT for use
during normal task binding to indicate that we should base our
decisions on the current task. This should not be used when
actually saving. Ideally we might want to use a separate enum for
the type to save but this enum and the enum values would then
need to be named which has problems with clarity and ambiguity.
In order to ease any future debugging that might be required this patch
does not actually update any of the decision making about what to save,
it merely starts tracking the new information and warns if the requested
state is not what we would otherwise have decided to save.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we save the state for the floating point registers this can be done
in the form visible through either the FPSIMD V registers or the SVE Z and
P registers. At present we track which format is currently used based on
TIF_SVE and the SME streaming mode state but particularly in the SVE case
this limits our options for optimising things, especially around syscalls.
Introduce a new enum which we place together with saved floating point
state in both thread_struct and the KVM guest state which explicitly
states which format is active and keep it up to date when we change it.
At present we do not use this state except to verify that it has the
expected value when loading the state, future patches will introduce
functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflicts due to earlier backports ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 8383741ab2e773a99 (KVM: arm64: Get rid of host SVE tracking/saving)
KVM has not tracked the host SVE state, relying on the fact that we
currently disable SVE whenever we perform a syscall. This may not be true
in future since performance optimisation may result in us keeping SVE
enabled in order to avoid needing to take access traps to reenable it.
Handle this by clearing TIF_SVE and converting the stored task state to
FPSIMD format when preparing to run the guest. This is done with a new
call fpsimd_kvm_prepare() to keep the direct state manipulation
functions internal to fpsimd.c.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport to v6.1 ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REQ_F_APOLL_MULTISHOT doesn't guarantee it's executed from the multishot
context, so a multishot accept may get executed inline, fail
io_req_post_cqe(), and ask the core code to kill the request with
-ECANCELED by returning IOU_STOP_MULTISHOT even when a socket has been
accepted and installed.
Initializing const char opregion_signature[16] = OPREGION_SIGNATURE
(which is "IntelGraphicsMem") drops the NUL termination of the
string. This is intentional, but the compiler doesn't know this.
Switch to initializing header->signature directly from the string
litaral, with sizeof destination rather than source. We don't treat the
signature as a string other than for initialization; it's really just a
blob of binary data.
Add a static assert for good measure to cross-check the sizes.
Reported-by: Kees Cook <kees@kernel.org> Closes: https://lore.kernel.org/r/20250310222355.work.417-kees@kernel.org Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13934 Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Cc: stable@vger.kernel.org Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com> Link: https://lore.kernel.org/r/20250327124739.2609656-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 4f8207469094bd04aad952258ceb9ff4c77b6bfa) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the
reference to the shared dma_buf. The reference count is 0, so the
dma_buf is destroyed, which in turn decrements the corresponding
amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed -
calling drm_gem_object_release then dma_resv_fini (which destroys the
reservation object), then finally freeing the amdgpu_bo.
- nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory
formerly allocated to the amdgpu_bo.
- nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls
ttm_bo_release, which schedules ttm_bo_delayed_delete.
- ttm_bo_delayed_delete runs and dereferences the dangling resv pointer,
resulting in a general protection fault.
Fix this by moving the drm_prime_gem_destroy call from
nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will
be run after ttm_bo_delayed_delete.
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Suggested-by: Christian König <christian.koenig@amd.com> Fixes: 22b33e8ed0e3 ("nouveau: add PRIME support") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3937 Cc: Stable@vger.kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/Z-P4epVK8k7tFZ7C@debian.local Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The page_link lower bits of the first sg could contain something like
SG_END, if we are mapping a single VRAM page or contiguous blob which
fits into one sg entry. Rather pull out the struct page, and use that in
our check to know if we mapped struct pages vs VRAM.
Fixes: f44ffd677fb3 ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
