Upon RQ destruction if the firmware command fails which is the
last resource to be destroyed some SW resources were already cleaned
regardless of the failure.
Now properly rollback the object to its original state upon such failure.
The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.
The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.
In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.
Return values of the linker_append_sec_data() and the
linker_append_elf_relos() functions are propagated all the
way up to users of libbpf API. In some error cases these
functions return -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
After 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block
migration"), we will tag page w/ gcing flag for raw page of cluster
during its migration.
However, if the inode is both encrypted and compressed, during
ioc_decompress(), it will tag page w/ gcing flag, and it increase
F2FS_WB_DATA reference count:
- f2fs_write_multi_page
- f2fs_write_raw_page
- f2fs_write_single_page
- do_write_page
- f2fs_submit_page_write
- WB_DATA_TYPE(bio_page, fio->compressed_page)
: bio_page is encrypted, so mapping is NULL, and fio->compressed_page
is NULL, it returns F2FS_WB_DATA
- inc_page_count(.., F2FS_WB_DATA)
Then, during end_io(), it decrease F2FS_WB_CP_DATA reference count:
- f2fs_write_end_io
- f2fs_compress_write_end_io
- fscrypt_pagecache_folio
: get raw page from encrypted page
- WB_DATA_TYPE(&folio->page, false)
: raw page has gcing flag, it returns F2FS_WB_CP_DATA
- dec_page_count(.., F2FS_WB_CP_DATA)
In order to fix this issue, we need to detect gcing flag in raw page
in f2fs_is_cp_guaranteed().
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration") Reported-by: Jan Prusakowski <jprusakowski@google.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe
I_T nexus reset failure"), if the softreset fails upon certain
conditions, the PHY connected to the disk is disabled directly. Manual
recovery is required, which is inconvenient for users in actual use.
In addition, SATA disks do not support simultaneous connection of multiple
hosts. Therefore, when multiple controllers are connected to a SATA disk
at the same time, the controller which is connected later failed to issue
an ATA softreset to the SATA disk. As a result, the PHY associated with
the disk is disabled and cannot be automatically recovered.
Now that, we will not focus on the execution result of softreset. No
matter whether the execution is successful or not, we will directly carry
out I_T_nexus_reset.
Fixes: 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure") Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20250414080845.1220997-4-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hns_roce_hw_v2.h has a direct dependency on hnae3.h due to the
inline function hns_roce_write64(), but it doesn't include this
header currently. This leads to that files including
hns_roce_hw_v2.h must also include hnae3.h to avoid compilation
errors, even if they themselves don't really rely on hnae3.h.
This doesn't make sense, hns_roce_hw_v2.h should include hnae3.h
directly.
Fixes: d3743fa94ccd ("RDMA/hns: Fix the chip hanging caused by sending doorbell during reset") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250421132750.1363348-6-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'rtw8822c_dpk_cal_coef1()', do not ignore error returned
by 'check_hw_ready()' but issue a warning to denote possible
DPK issue. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
Correct Get Controller Packet Statistics (GCPS) 64-bit wide member
variables, as per DSP0222 v1.0.0 and forward specs. The Driver currently
collects these stats, but they are yet to be exposed to the user.
Therefore, no user impact.
Statistics fixes:
Total Bytes Received (byte range 28..35)
Total Bytes Transmitted (byte range 36..43)
Total Unicast Packets Received (byte range 44..51)
Total Multicast Packets Received (byte range 52..59)
Total Broadcast Packets Received (byte range 60..67)
Total Unicast Packets Transmitted (byte range 68..75)
Total Multicast Packets Transmitted (byte range 76..83)
Total Broadcast Packets Transmitted (byte range 84..91)
Valid Bytes Received (byte range 204..11)
The reason is: in fuzzed image, sbi->total_valid_block_count is
inconsistent w/ mapped blocks indexed by inode, so, we should
not trigger panic for such case, instead, let's print log and
set fsck flag.
Fixes: 39a53e0ce0df ("f2fs: add superblock and major in-memory structure") Reported-by: syzbot+8b376a77b2f364097fbe@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/67f3c0b2.050a0220.396535.0547.GAE@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.
The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.
To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.
'''
sk_psock_backlog:
sk_psock_handle_skb
skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
sk_psock_skb_ingress____________
↓
|
| → sk_psock_skb_ingress_self
| sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑ skb_linearize
'''
Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior.
In the !ingress path under sk_psock_handle_skb(), when sending data to the
remote under snd_buf limitations, partial skb data might be transmitted.
Although we preserved the partial transmission state (offset/length), the
state wasn't properly consumed during retries. This caused the retry path
to resend the entire skb data instead of continuing from the previous
offset, resulting in data overlap at the receiver side.
After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase,
e.g., when the BPF program executes bpf_msg_push_data().
If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes,
it will return -ENOSPC and attempt to roll back to the non-zero copy
logic. However, during rollback, msg->msg_iter is reset, but since
msg_pl->sg.size has been increased, subsequent executions will exceed the
actual size of msg_iter.
'''
iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size);
'''
The changes in this commit are based on the following considerations:
1. When cork_bytes is set, rolling back to non-zero copy logic is
pointless and can directly go to zero-copy logic.
2. We can not calculate the correct number of bytes to revert msg_iter.
Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes
by the BPF program, it becomes 11-byte data: "abc?de?fgh?".
Then, we set cork_bytes to 6, which means the first 6 bytes have been
processed, and the remaining 5 bytes "?fgh?" will be cached until the
length meets the cork_bytes requirement.
However, some data in "?fgh?" is not within 'sg->msg_iter'
(but in msg_pl instead), especially the data "?" we pushed.
So it doesn't seem as simple as just reverting through an offset of
msg_iter.
3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs,
the user-space send() doesn't return an error, and the returned length is
the same as the input length parameter, even if some data is cached.
Additionally, I saw that the current non-zero-copy logic for handling
corking is written as:
'''
line 1177
else if (ret != -EAGAIN) {
if (ret == -ENOSPC)
ret = 0;
goto send_end;
'''
So it's ok to just return 'copied' without error when a "cork" situation
occurs.
In workloads where there are many processes establishing connections using
RDMA CM in parallel (large scale MPI), there can be heavy contention for
mad_agent_lock in cm_alloc_msg.
This contention can occur while inside of a spin_lock_irq region, leading
to interrupts being disabled for extended durations on many
cores. Furthermore, it leads to the serialization of rdma_create_ah calls,
which has negative performance impacts for NICs which are capable of
processing multiple address handle creations in parallel.
The end result is the machine becoming unresponsive, hung task warnings,
netdev TX timeouts, etc.
Since the lock appears to be only for protection from cm_remove_one, it
can be changed to a rwlock to resolve these issues.
Reproducer:
Server:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) &
done
Client:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) -s 10.2.0.52 &
done
Fixes: 76039ac9095f ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock") Link: https://patch.msgid.link/r/20250220175612.2763122-1-jmoroni@google.com Signed-off-by: Jacob Moroni <jmoroni@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.
This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.
Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()") Cc: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Fixes: 8b1865873651 ("drm/vkms: totally reworked crc data tracking") Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org Signed-off-by: Louis Chauvet <contact@louischauvet.fr> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rcar_du_vsps_init() doesn't free the np allocated by
of_parse_phandle_with_fixed_args() for the non-error case.
Fix memory leak for the non-error case.
While at it, replace the label 'error'->'done' as it applies to non-error
case as well and update the error check condition for rcar_du_vsp_init()
to avoid breakage in future, if it returns positive value.
Fixes: 3e81374e2014 ("drm: rcar-du: Support multiple sources from the same VSP") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20231116122424.80136-1-biju.das.jz@bp.renesas.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.
This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Detected Macintosh model: 6
Apple Macintosh Unknown
The catch-all entry ("Unknown") is mac_data_table[0] which is only needed
in the unlikely event that the bootinfo model ID can't be matched.
When model ID is 6, the search should begin and end at mac_data_table[1].
Fix the off-by-one error that causes this problem.
The static initializer for struct watchdog_info::identity is too long
and gets initialized without a trailing NUL byte. Since the length
of "identity" is part of UAPI and tied to ioctls, just shorten
the name of the device. Avoids the warning seen with GCC 15's
-Wunterminated-string-initialization option:
drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
224 | .identity = "Exar/MaxLinear XR28V38x Watchdog",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The hdr_first_de() function returns a pointer to a struct NTFS_DE. This
pointer may be NULL. To handle the NULL error effectively, it is important
to implement an error handler. This will help manage potential errors
consistently.
Additionally, error handling for the return value already exists at other
points where this function is called.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block") Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For backwards compatibility reasons, when a signal return occurs which
restores SVE state, the effective lower 128 bits of each of the SVE
vector registers are restored from the corresponding FPSIMD vector
register in the FPSIMD signal frame, overriding the values in the SVE
signal frame. This is intended to be the case regardless of streaming
mode.
To make this happen, restore_sve_fpsimd_context() uses
fpsimd_update_current_state() to merge the lower 128 bits from the
FPSIMD signal frame into the SVE register state. Unfortunately,
fpsimd_update_current_state() performs this merging dependent upon
TIF_SVE, which is not always correct for streaming SVE register state:
* When restoring non-streaming SVE register state there is no observable
problem, as the signal return code configures TIF_SVE and the saved
fp_type to match before calling fpsimd_update_current_state(), which
observes either:
- TIF_SVE set AND fp_type == FP_STATE_SVE
- TIF_SVE clear AND fp_type == FP_STATE_FPSIMD
* On systems which have SME but not SVE, TIF_SVE cannot be set. Thus the
merging will never happen for the streaming SVE register state.
* On systems which have SVE and SME, TIF_SVE can be set and cleared
independently of PSTATE.SM. Thus the merging may or may not happen for
streaming SVE register state.
As TIF_SVE can be cleared non-deterministically during syscalls
(including at the start of sigreturn()), the merging may occur
non-deterministically from the perspective of userspace.
This logic has been broken since its introduction in commit:
85ed24dad2904f7c ("arm64/sme: Implement streaming SVE signal handling")
... at which point both fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() only checked TIF SVE. When PSTATE.SM==1
and TIF_SVE was clear, signal delivery would place stale FPSIMD state
into the FPSIMD signal frame, and signal return would not merge this
into the restored register state.
Subsequently, signal delivery was fixed as part of commit:
61da7c8e2a602f66 ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... but signal restore was not given a corresponding fix, and when
TIF_SVE was clear, signal restore would still fail to merge the FPSIMD
state into the restored SVE register state. The 'Fixes' tag did not
indicate that this had been broken since its introduction.
Fix this by merging the FPSIMD state dependent upon the saved fp_type,
matching what we (currently) do during signal delivery.
As described above, when backporting this commit, it will also be
necessary to backport commit:
61da7c8e2a602f66 ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... and prior to commit:
baa8515281b30861 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
... it will be necessary for fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() to consider both TIF_SVE and
thread_sm_enabled(¤t->thread), in place of the saved fp_type.
Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250409164010.3480271-10-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Suggested-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb519 ("drm/amd/pp: Use atombios api directly in powerplay (v2)") Fixes: 5f92b48cf62c ("drm/amd/pm: add mc register table initialization") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because sync_files are passive waiters they do not participate in
the processing of fences like the traditional vmw_fence_wait IOCTL.
If userspace exclusively uses sync_files for synchronization then
nothing in the kernel actually processes fence updates as interrupts
for fences are masked and ignored if the kernel does not indicate to the
SVGA device that there are active waiters.
This oversight results in a bug where the entire GUI can freeze waiting
on a sync_file that will never be signalled as we've masked the interrupts
to signal its completion. This bug is incredibly racy as any process which
interacts with the fencing code via the 3D stack can process the stuck
fences on behalf of the stuck process causing it to run again. Even a
simple app like eglinfo is enough to resume the stuck process. Usually
this bug is seen at a login screen like GDM because there are no other
3D apps running.
By adding a seqno waiter we re-enable interrupt based processing of the
dma_fences associated with the sync_file which is signalled as part of a
dma_fence_callback.
This has likely been broken since it was initially added to the kernel in
2017 but has gone unnoticed until mutter recently started using sync_files
heavily over the course of 2024 as part of their explicit sync support.
We don't (and can't) configure the hardware correctly if the number of
channels exceeds the weight of the TDM mask. Report that constraint in
startup of FE.
Fixes: 3df5d0d97289 ("ASoC: apple: mca: Start new platform driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20250518-mca-fixes-v1-1-ee1015a695f6@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers). However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.
Fix this by using the minimum applicable FIFO size instead. Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.
As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.
As specified in section 5.7.2 of the ACPI specification the feature
group string "3.0 _SCP Extensions" implies that the operating system
evaluates the _SCP control method with additional parameters.
However the ACPI thermal driver evaluates the _SCP control method
without those additional parameters, conflicting with the above
feature group string advertised to the firmware thru _OSI.
Stop advertising support for this feature string to avoid confusing
the ACPI firmware.
Fixes: e5f660ebef68 ("ACPI / osi: Collect _OSI handling into one single file") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20250410165456.4173-2-W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad5905609 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending") Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_show_wakelocks() is called to generate a string when showing
attributes /sys/power/wake_(lock|unlock), but the string ends
with an unwanted space that was added back by mistake by commit c9d967b2ce40 ("PM: wakeup: simplify the output logic of
pm_show_wakelocks()").
Remove the unwanted space.
Fixes: c9d967b2ce40 ("PM: wakeup: simplify the output logic of pm_show_wakelocks()") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://patch.msgid.link/20250505-fix_power-v1-1-0f7f2c2f338c@quicinc.com
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac2a ("power: reset: at91-reset: make at91sam9g45_restart() generic") Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Modify the chip select (CS) deactivation and inter-transfer delay
execution only during the DATA_TRANSFER phase when the cs_change
flag is not set. This ensures proper CS handling and timing between
transfers while eliminating redundant operations.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode") Signed-off-by: Vishwaroop A <va@nvidia.com> Link: https://patch.msgid.link/20250416110606.2737315-4-va@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove unnecessary error handling code that terminated transfers and
executed delay on errors. This code was redundant as error handling is
already done at a higher level in the SPI core.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode") Signed-off-by: Vishwaroop A <va@nvidia.com> Link: https://patch.msgid.link/20250416110606.2737315-3-va@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch corrects the QSPI_COMMAND_X1_X2_X4 and QSPI_ADDRESS_X1_X2_X4
macros to properly encode the bus width for x1, x2, and x4 transfers.
Although these macros were previously incorrect, they were not being
used in the driver, so no functionality was affected.
The patch updates tegra_qspi_cmd_config() and tegra_qspi_addr_config()
function calls to use the actual bus width from the transfer, instead of
hardcoding it to 0 (which implied x1 mode). This change enables proper
support for x1, x2, and x4 data transfers by correctly configuring the
interface width for commands and addresses.
These modifications improve the QSPI driver's flexibility and prepare it
for future use cases that may require different bus widths for commands
and addresses.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode") Signed-off-by: Vishwaroop A <va@nvidia.com> Link: https://patch.msgid.link/20250416110606.2737315-2-va@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac.
Fixes: 123b15863550 ("EDAC, i10nm: make skx_common.o a separate module") Reported-by: Feng Xu <feng.f.xu@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Tested-by: Feng Xu <feng.f.xu@intel.com> Link: https://lore.kernel.org/r/20250417150724.1170168-2-qiuxu.zhuo@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
IRQ handling was added in commit dae191fb957f ("ASoC: tas2764: Add IRQ
handling") however that same commit masks all interrupts coming from
the chip. Unmask the "main" interrupts so that we can see and
deal with a number of errors including clock, voltage, and current.
Fixes: dae191fb957f ("ASoC: tas2764: Add IRQ handling") Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-4-50a00ec850a3@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not access random memory for zero-length skcipher requests.
Just return 0.
Fixes: f63601fd616a ("crypto: marvell/cesa - add a new driver for Marvell's CESA") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135af0 ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX") Fixes: 3da99c977637 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit") Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: x86-cpuid@lists.linux.dev Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
In non-smp configurations, crash_kexec_prepare is never called in
the crash shutdown path. One result of this is that the crashing_cpu
variable is never set, preventing crash_save_cpu from storing the
NT_PRSTATUS elf note in the core dump.
Fixes: c7255058b543 ("powerpc/crash: save cpu register data in crash_smp_send_stop()") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250211162054.857762-1-eajames@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When testing sun8i-ss with multi_v7_defconfig, all CBC algorithm fail crypto
selftests.
This is strange since on sunxi_defconfig, everything was ok.
The problem was in the IV setup loop which never run because sg_dma_len
was 0.
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
According to the throttling mechanism, the pmu interrupts number can not
exceed the max_samples_per_tick in one tick. But this mechanism is
ineffective when max_samples_per_tick=1, because the throttling check is
skipped during the first interrupt and only performed when the second
interrupt arrives.
Perhaps this bug may cause little influence in one tick, but if in a
larger time scale, the problem can not be underestimated.
When max_samples_per_tick = 1:
Allowed-interrupts-per-second max-samples-per-second default-HZ ARCH
200 100 100 X86
500 250 250 ARM64
...
Obviously, the pmu interrupt number far exceed the user's expect.
When gfs2_create_inode() finds a directory, make sure to return -EISDIR.
Fixes: 571a4b57975a ("GFS2: bugger off early if O_CREAT open finds a directory") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set.
wait_event_interruptible_timeout requires a timeout argument
in units of jiffies. It was being called in usbtmc_get_stb
with the usb timeout value which is in units of milliseconds.
Pass the timeout argument converted to jiffies.
Fixes: 048c6d88a021 ("usb: usbtmc: Add ioctls to set/get usb timeout") Cc: stable@vger.kernel.org Signed-off-by: Dave Penkler <dpenkler@gmail.com> Link: https://lore.kernel.org/r/20250521121656.18174-4-dpenkler@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL
returned by gpiod_get_optional()") accidentally changed the prevous
behavior where power control would be disabled without the BT_EN GPIO
only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check
wrong. We should treat every IS_ERR() return value from
devm_gpiod_get_optional() as a reason to bail-out while we should only
set power_ctrl_enabled to false on the two models mentioned above. While
at it: use dev_err_probe() to save a LOC.
Cc: stable@vger.kernel.org Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Hsin-chen Chuang <chharry@chromium.org> Reviewed-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device exhibits I/O errors during file transfers due to unstable
link power management (LPM) behavior. The kernel logs show repeated
warm resets and eventual disconnection when LPM is enabled:
[ 3467.810740] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
[ 3467.810740] usb usb2-port5: do warm reset
[ 3467.866444] usb usb2-port5: not warm reset yet, waiting 50ms
[ 3467.907407] sd 0:0:0:0: [sda] tag#12 sense submit err -19
[ 3467.994423] usb usb2-port5: status 02c0, change 0001, 10.0 Gb/s
[ 3467.994453] usb 2-5: USB disconnect, device number 4
The error -19 (ENODEV) occurs when the device disappears during write
operations. Adding USB_QUIRK_NO_LPM disables link power management
for this specific device, resolving the stability issues.
has a signed left-hand side and an unsigned right-hand side.
So the comparison might become true for negative start_secs which is
interpreted as a (possibly very large) positive value.
As a negative value can never be bigger than an unsigned value
the correct representation of the (mathematical) comparison
Conversion of dates before 1970 is still relevant today because these
dates are reused on some hardwares to store dates bigger than the
maximal date that is representable in the device's native format.
This prominently and very soon affects the hardware covered by the
rtc-mt6397 driver that can only natively store dates in the interval
1900-01-01 up to 2027-12-31. So to store the date 2028-01-01 00:00:00
to such a device, rtc_time64_to_tm() must do the right thing for
time=-2208988800.
commit 083466754596 ("cpufreq: ACPI: Fix max-frequency computation")
modified get_max_boost_ratio() to return the nominal_freq advertised
in the _CPC object. This was for the purposes of computing the maximum
frequency. The frequencies advertised in _CPC objects are in
MHz. However, cpufreq expects the frequency to be in KHz. Since the
nominal_freq returned by get_max_boost_ratio() was not in KHz but
instead in MHz,the cpuinfo_max_frequency that was computed using this
nominal_freq was incorrect and an invalid value which resulted in
cpufreq reporting the P0 frequency as the cpuinfo_max_freq.
Fix this by converting the nominal_freq to KHz before returning the
same from get_max_boost_ratio().
Reported-by: Manu Bretelle <chantr4@gmail.com> Closes: https://lore.kernel.org/lkml/aDaB63tDvbdcV0cg@HQ-GR2X1W2P57/ Fixes: 083466754596 ("cpufreq: ACPI: Fix max-frequency computation") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Cc: 6.14+ <stable@vger.kernel.org> # 6.14+ Link: https://patch.msgid.link/20250529085143.709-1-gautham.shenoy@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing the direction before updating the output value in the
OUTPUT_VAL register may result in a glitch on the output line
if the previous value in the OUTPUT_VAL register is different
from the one we want to set.
In order to avoid that, update the output value before changing
the direction.
The controller has two consecutive OUTPUT_VAL registers and both
holds output value for 32 GPIOs. Due to a missing adjustment, the
current code always uses the first register while setting the
output value whereas it should use the second one for GPIOs > 31.
Add the missing armada_37xx_update_reg() call to adjust the register
according to the 'offset' parameter of the function to fix the issue.
On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.
Compilation warning details:
kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
...
kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
min((size_t)trace_seq_used(&iter->seq),
^~~
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com Fixes: f5178c41bb43 ("tracing: Fix oob write in trace_seq_to_buffer()") Reviewed-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Pan Taixi <pantaixi@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.
Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis. The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.
Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.
Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].
It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:
It's possible that "start" is contained within vma but not clamped to its
start. We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev.
As we loop, each subsequent VMA will be clamped to the start.
This patch will eliminate the report and make sure vma_merge() calls will
become legal again.
One thing to mention is that the "Fixes: 29417d292bd0" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6daf104. Commit 29417d292bd0 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.
Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com Fixes: 69dbe6daf104 ("userfaultfd: use maple tree iterator to iterate VMAs") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/ Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub: contextual change - keep call to mas_next()] Cc: <linux-mm@kvack.org> Signed-off-by: Jakub Acs <acsjakub@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If user modifies the battery charge threshold an ACPI event is generated.
Confirmed with Lenovo FW team this is only generated on user event. As no
action is needed, ignore the event and prevent spurious kernel logs.
Reported-by: Derek Barbosa <debarbos@redhat.com> Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53fb5dc@app.fastmail.com/T/#m5f5b9ae31d3fbf30d7d9a9d76c15fb3502dfd903 Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The S2110 has an additional set of media playback control keys enabled
by a hardware toggle button that switches the keys between "Application"
and "Player" modes. Toggling "Player" mode just shifts the scancode of
each hotkey up by 4.
Add defines for new scancodes, and a keymap and dmi id for the S2110.
Tested on a Fujitsu Lifebook S2110.
Signed-off-by: Valtteri Koskivuori <vkoskiv@gmail.com> Acked-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
The SPI interface is activated before the CPOL setting is applied. In
that moment, the clock idles high and CS goes low. After a short delay,
CPOL and other settings are applied, which may cause the clock to change
state and idle low. This transition is not part of a clock cycle, and it
can confuse the receiving device.
To prevent this unexpected transition, activate the interface while CPOL
and the other settings are being applied.
Building the kernel with O= is affected by stale in-tree build artifacts.
So, if the source tree is not clean, Kbuild displays the following:
$ make ARCH=um O=build defconfig
make[1]: Entering directory '/.../linux/build'
***
*** The source tree is not clean, please run 'make ARCH=um mrproper'
*** in /.../linux
***
make[2]: *** [/.../linux/Makefile:673: outputmakefile] Error 1
make[1]: *** [/.../linux/Makefile:248: __sub-make] Error 2
make[1]: Leaving directory '/.../linux/build'
make: *** [Makefile:248: __sub-make] Error 2
Usually, running 'make mrproper' is sufficient for cleaning the source
tree for out-of-tree builds.
However, building UML generates build artifacts not only in arch/um/,
but also in the SUBARCH directory (i.e., arch/x86/). If in-tree stale
files remain under arch/x86/, Kbuild will reuse them instead of creating
new ones under the specified build directory.
This commit makes 'make ARCH=um clean' recurse into the SUBARCH directory.
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com> Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, different NFS clients can share the same DS connections, even
when they are in different net namespaces. If a containerized client
creates a DS connection, another container can find and use it. When the
first client exits, the connection will close which can lead to stalls
in other clients.
Add a net namespace pointer to struct nfs4_pnfs_ds, and compare those
value to the caller's netns in _data_server_lookup_locked() when
searching for a nfs4_pnfs_ds to match.
This patch adds HID_QUIRK_ALWAYS_POLL for the ADATA XPG wireless gaming mouse (USB ID 125f:7505) and its USB dongle (USB ID 125f:7506). Without this quirk, the device does not generate input events properly.
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
[brauner: This is a backport for the v6.1 series. Upstream has
significantly changed and backporting all that infra is a non-starter.
So simply backport the pidfd_prepare() helper and waste the file
descriptor we allocated. Then we minimally massage the umh coredump
setup code.]
Stop open-coding get_unused_fd_flags() and anon_inode_getfile(). That's
brittle just for keeping the flags between both calls in sync. Use the
dedicated helper.
Message-Id: <20230327-pidfd-file-api-v1-2-5c0e9a3158e4@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new helper that allows to reserve a pidfd and allocates a new
pidfd file that stashes the provided struct pid. This will allow us to
remove places that either open code this function or that call
pidfd_create() but then have to call close_fd() because there are still
failure points after pidfd_create() has been called.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The replace_fd() helper returns the file descriptor number on success
and a negative error code on failure. The current error handling in
umh_pipe_setup() only works because the file descriptor that is replaced
is zero but that's pretty volatile. Explicitly check for a negative
error code.
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable@vger.kernel.org Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
GC attempts to explicitly drop oob_skb's reference before purging the hit
list.
The problem is with embryos: kfree_skb(u->oob_skb) is never called on an
embryo socket.
The python script below [0] sends a listener's fd to its embryo as OOB
data. While GC does collect the embryo's queue, it fails to drop the OOB
skb's refcount. The skb which was in embryo's receive queue stays as
unix_sk(sk)->oob_skb and keeps the listener's refcount [1].
Commit 1af2dface5d2 ("af_unix: Don't access successor in unix_del_edges()
during GC.") fixed use-after-free by avoid accessing edge->successor while
GC is in progress.
However, there could be a small race window where another process could
call unix_del_edges() while gc_in_progress is true and __skb_queue_purge()
is on the way.
So, we need another marker for struct scm_fp_list which indicates if the
skb is garbage-collected.
This patch adds dead flag in struct scm_fp_list and set it true before
calling __skb_queue_purge().
Fixes: 1af2dface5d2 ("af_unix: Don't access successor in unix_del_edges() during GC.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240508171150.50601-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here, two skb are created, and every unix_edge->successor is the first
socket. Then, __unix_gc() will garbage-collect the two skb:
(a) free skb with self-referencing fd
(b) free skb holding other sockets
After (a), the self-referencing socket will be scheduled to be freed
later by the delayed_fput() task.
syzbot repeated the sequences above (1. ~ 3.) quickly and triggered
the task concurrently while GC was running.
So, at (b), the socket was already freed, and accessing it was illegal.
unix_del_edges() accesses the receiver socket as edge->successor to
optimise GC. However, we should not do it during GC.
Garbage-collecting sockets does not change the shape of the rest
of the graph, so we need not call unix_update_graph() to update
unix_graph_grouped when we purge skb.
However, if we clean up all loops in the unix_walk_scc_fast() path,
unix_graph_maybe_cyclic remains unchanged (true), and __unix_gc()
will call unix_walk_scc_fast() continuously even though there is no
socket to garbage-collect.
To keep that optimisation while fixing UAF, let's add the same
updating logic of unix_graph_maybe_cyclic in unix_walk_scc_fast()
as done in unix_walk_scc() and __unix_walk_scc().
Note that when unix_del_edges() is called from other places, the
receiver socket is always alive:
- sendmsg: the successor's sk_refcnt is bumped by sock_hold()
unix_find_other() for SOCK_DGRAM, connect() for SOCK_STREAM
- recvmsg: the successor is the receiver, and its fd is alive
[0]:
BUG: KASAN: slab-use-after-free in unix_edge_successor net/unix/garbage.c:109 [inline]
BUG: KASAN: slab-use-after-free in unix_del_edge net/unix/garbage.c:165 [inline]
BUG: KASAN: slab-use-after-free in unix_del_edges+0x148/0x630 net/unix/garbage.c:237
Read of size 8 at addr ffff888079c6e640 by task kworker/u8:6/1099
The buggy address belongs to the object at ffff888079c6e000
which belongs to the cache UNIX of size 1920
The buggy address is located 1600 bytes inside of
freed 1920-byte region [ffff888079c6e000, ffff888079c6e780)
Reported-by: syzbot+f3f3eef1d2100200e593@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3f3eef1d2100200e593 Fixes: 77e5593aebba ("af_unix: Skip GC if no cycle exists.") Fixes: fd86344823b5 ("af_unix: Try not to hold unix_gc_lock during accept().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240419235102.31707-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit dcf70df2048d ("af_unix: Fix up unix_edge.successor for embryo
socket.") added spin_lock(&unix_gc_lock) in accept() path, and it
caused regression in a stress test as reported by kernel test robot.
If the embryo socket is not part of the inflight graph, we need not
hold the lock.
To decide that in O(1) time and avoid the regression in the normal
use case,
1. add a new stat unix_sk(sk)->scm_stat.nr_unix_fds
2. count the number of inflight AF_UNIX sockets in the receive
queue under unix_state_lock()
3. move unix_update_edges() call under unix_state_lock()
4. avoid locking if nr_unix_fds is 0 in unix_update_edges()
Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404101427.92a08551-oliver.sang@intel.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240413021928.20946-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the previous GC implementation, the shape of the inflight socket
graph was not expected to change while GC was in progress.
MSG_PEEK was tricky because it could install inflight fd silently
and transform the graph.
Let's say we peeked a fd, which was a listening socket, and accept()ed
some embryo sockets from it. The garbage collection algorithm would
have been confused because the set of sockets visited in scan_inflight()
would change within the same GC invocation.
That's why we placed spin_lock(&unix_gc_lock) and spin_unlock() in
unix_peek_fds() with a fat comment.
In the new GC implementation, we no longer garbage-collect the socket
if it exists in another queue, that is, if it has a bridge to another
SCC. Also, accept() will require the lock if it has edges.
Thus, we need not do the complicated lock dance.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240401173125.92184-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definition of the lowlink in Tarjan's algorithm is the
smallest index of a vertex that is reachable with at most one
back-edge in SCC. This is not useful for a cross-edge.
If we start traversing from A in the following graph, the final
lowlink of D is 3. The cross-edge here is one between D and C.
A -> B -> D D = (4, 3) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
This is because the lowlink of D is updated with the index of C.
In the following patch, we detect a dead SCC by checking two
conditions for each vertex.
1) vertex has no edge directed to another SCC (no bridge)
2) vertex's out_degree is the same as the refcount of its file
If 1) is false, there is a receiver of all fds of the SCC and
its ancestor SCC.
To evaluate 1), we need to assign a unique index to each SCC and
assign it to all vertices in the SCC.
This patch changes the lowlink update logic for cross-edge so
that in the example above, the lowlink of D is updated with the
lowlink of C.
A -> B -> D D = (4, 1) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
Then, all vertices in the same SCC have the same lowlink, and we
can quickly find the bridge connecting to different SCC if exists.
However, it is no longer called lowlink, so we rename it to
scc_index. (It's sometimes called lowpoint.)
Also, we add a global variable to hold the last index used in DFS
so that we do not reset the initial index in each DFS.
This patch can be squashed to the SCC detection patch but is
split deliberately for anyone wondering why lowlink is not used
as used in the original Tarjan's algorithm and many reference
implementations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240325202425.60930-13-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not need to run GC if there is no possible cyclic reference.
We use unix_graph_maybe_cyclic to decide if we should run GC.
If a fd of an AF_UNIX socket is passed to an already inflight AF_UNIX
socket, they could form a cyclic reference. Then, we set true to
unix_graph_maybe_cyclic and later run Tarjan's algorithm to group
them into SCC.
Once we run Tarjan's algorithm, we are 100% sure whether cyclic
references exist or not. If there is no cycle, we set false to
unix_graph_maybe_cyclic and can skip the entire garbage collection
next time.
When finalising SCC, we set true to unix_graph_maybe_cyclic if SCC
consists of multiple vertices.
Even if SCC is a single vertex, a cycle might exist as self-fd passing.
Given the corner case is rare, we detect it by checking all edges of
the vertex and set true to unix_graph_maybe_cyclic.
With this change, __unix_gc() is just a spin_lock() dance in the normal
usage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240325202425.60930-11-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
