Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be
automatically detected.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In the current cpuidle implementation for i.MX6q, the CPU that sets
'WAIT_UNCLOCKED' and the CPU that returns to 'WAIT_CLOCKED' are always
the same. While the CPU that sets 'WAIT_UNCLOCKED' is in IDLE state of
"WAIT", if the other CPU wakes up and enters IDLE state of "WFI"
istead of "WAIT", this CPU can not wake up at expired time.
Because, in the case of "WFI", the CPU must be waked up by the local
timer interrupt. But, while 'WAIT_UNCLOCKED' is set, the local timer
is stopped, when all CPUs execute "wfi" instruction. As a result, the
local timer interrupt is not fired.
In this situation, this CPU will wake up by IRQ different from local
timer. (e.g. broacast timer)
So, this fix changes CPU to return to 'WAIT_CLOCKED'.
Signed-off-by: Kohji Okuno <okuno.kohji@jp.panasonic.com> Fixes: e5f9dec8ff5f ("ARM: imx6q: support WAIT mode using cpuidle") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
[bwh: Backported to 3.16: use imx6q_set_lpm() instead of imx6_set_lpm()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If the last NFSv3 unmount from a given host races with a mount from the
same host, we can destroy an nlm_host that is still in use.
Specifically nlmclnt_lookup_host() can increment h_count on
an nlm_host that nlmclnt_release_host() has just successfully called
refcount_dec_and_test() on.
Once nlmclnt_lookup_host() drops the mutex, nlm_destroy_host_lock()
will be called to destroy the nlmclnt which is now in use again.
The cause of the problem is that the dec_and_test happens outside the
locked region. This is easily fixed by using
refcount_dec_and_mutex_lock().
Fixes: 8ea6ecc8b075 ("lockd: Create client-side nlm_host cache") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[bwh: Backported to 3.16: use atomic instead of refcount API] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sctp_hdr(skb) only works when skb->transport_header is set properly.
But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.
So fix it by using offset, which is always right in all places.
v1->v2:
- Fix the changelog.
Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The bug that Stan reported is as follows. After a restart, a 16-bit NIC
may be incorrectly identified as a 32-bit NIC and stop working.
mac8390 slot.E: Memory length resource not found, probing
mac8390 slot.E: Farallon EtherMac II-C (type farallon)
mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access.
The bug never arises after a cold start and only intermittently after a
warm start. (I didn't investigate why the bug is intermittent.)
It turns out that memcpy_toio() is deprecated and memcmp_withio() also
has issues. Replacing these calls with mmio accessors fixes the problem.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f5904 ("m68k: Mac DP8390 update") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The mac8390 driver defines its own variants of memcpy_fromio() and
memcpy_toio(), using similar implementations, but different function
signatures.
Remove the custom definitions of memcpy_fromio() and memcpy_toio(), and
adjust all callers to the standard signatures.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Since Commit 21d1196a35f5 ("ipv4: set transport header earlier"),
skb->transport_header has been always set before entering INET
netfilter. This patch is to set skb->transport_header for bridge
before entering INET netfilter by bridge-nf-call-iptables.
It also fixes an issue that sctp_error() couldn't compute a right
csum due to unset skb->transport_header.
Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by: Li Shuang <shuali@redhat.com> Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: adjust filenames, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Jakub Drnec reported:
Setting the realtime clock can sometimes make the monotonic clock go
back by over a hundred years. Decreasing the realtime clock across
the y2k38 threshold is one reliable way to reproduce. Allegedly this
can also happen just by running ntpd, I have not managed to
reproduce that other than booting with rtc at >2038 and then running
ntp. When this happens, anything with timers (e.g. openjdk) breaks
rather badly.
And included a test case (slightly edited for brevity):
#define _POSIX_C_SOURCE 199309L
#include <stdio.h>
#include <time.h>
#include <stdlib.h>
#include <unistd.h>
int main(void) {
long last = get_time();
while(1) {
long now = get_time();
if (now < last) {
printf("clock went backwards by %ld seconds!\n", last - now);
}
last = now;
sleep(1);
}
return 0;
}
Which when run concurrently with:
# date -s 2040-1-1
# date -s 2037-1-1
Will detect the clock going backward.
The root cause is that wtom_clock_sec in struct vdso_data is only a
32-bit signed value, even though we set its value to be equal to
tk->wall_to_monotonic.tv_sec which is 64-bits.
Because the monotonic clock starts at zero when the system boots the
wall_to_montonic.tv_sec offset is negative for current and future
dates. Currently on a freshly booted system the offset will be in the
vicinity of negative 1.5 billion seconds.
However if the wall clock is set past the Y2038 boundary, the offset
from wall to monotonic becomes less than negative 2^31, and no longer
fits in 32-bits. When that value is assigned to wtom_clock_sec it is
truncated and becomes positive, causing the VDSO assembly code to
calculate CLOCK_MONOTONIC incorrectly.
That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which
it is not meant to do. Worse, if the time is then set back before the
Y2038 boundary CLOCK_MONOTONIC will jump backward.
We can fix it simply by storing the full 64-bit offset in the
vdso_data, and using that in the VDSO assembly code. We also shuffle
some of the fields in vdso_data to avoid creating a hole.
The original commit that added the CLOCK_MONOTONIC support to the VDSO
did actually use a 64-bit value for wtom_clock_sec, see commit a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to
32 bits kernel") (Nov 2005). However just 3 days later it was
converted to 32-bits in commit 0c37ec2aa88b ("[PATCH] powerpc: vdso
fixes (take #2)"), and the bug has existed since then AFAICS.
Fixes: 0c37ec2aa88b ("[PATCH] powerpc: vdso fixes (take #2)") Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.cz Reported-by: Jakub Drnec <jaydee@email.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.16: CLOCK_MONOTONIC_COARSE is not handled by
this vDSO] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When switching from speakup_soft to another synth, speakup_soft would
keep calling synth_buffer_getc() from softsynthx_read.
Let's thus make synth.c export the knowledge of the current synth, so
that speakup_soft can determine whether it should be running.
speakup_soft also needs to set itself alive, otherwise the switch would
let it remain silent.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
- There's no Unicode support
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When issuing the write DAC register and write eeprom command, the two
powerdown bits (PD0 and PD1) are assumed by the chip to be present in
the bytes sent. Leaving them at 0 implies "powerdown disabled" which is
a different state that the current one. By adding the current state of
the powerdown in the i2c write, the chip will correctly power-on exactly
like as it is at the moment of store_eeprom call.
This is documented in MCP4725's datasheet, FIGURE 6-2: "Write Commands
for DAC Input Register and EEPROM" and MCP4726's datasheet, FIGURE 6-3:
"Write All Memory Command".
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly
frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the
xfrm6_tunnel_spi, so need to wait it.
Fixes: 91cc3bb0b04ff("xfrm6_tunnel: RCU conversion") Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh
in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by
moving the ext4_journal_get_write_access() before the ext4 sb update as
Ted suggested and release n_group_desc and gdb_bh in case it fails.
Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.
However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.
Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.
On mmap(), perf_events generates a RECORD_MMAP record and then checks
which events are interested in this record. There are currently 2
versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger.
The event configuration controls which version the user level tool
accepts.
If the event->attr.mmap2=1 field then MMAP2 record is returned. The
perf_event_mmap_output() takes care of this. It checks attr->mmap2 and
corrects the record fields before putting it in the sampling buffer of
the event. At the end the function restores the modified MMAP record
fields.
The problem is that the function restores the size but not the type.
Thus, if a subsequent event only accepts MMAP type, then it would
instead receive an MMAP2 record with a size of MMAP record.
This patch fixes the problem by restoring the record type on exit.
Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Fixes: 13d7a2410fa6 ("perf: Add attr->mmap2 attribute to an event") Link: http://lkml.kernel.org/r/20190307185233.225521-1-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Having a brief look at at91_adc_read_raw() it is obvious that in the case
of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is
omitted. If 2 different channels are queried we can end up with a
situation where two interrupts are enabled, but only one interrupt is
cleared in the interrupt handler. Resulting in a interrupt loop and a
system hang.
Signed-off-by: Georg Ottinger <g.ottinger@abatec.at> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The trialmask is expected to have all bits set to 0 after allocation.
Currently kmalloc_array() is used which does not zero the memory and so
random bits are set. This results in random channels being enabled when
they shouldn't. Replace kmalloc_array() with kcalloc() which has the same
interface but zeros the memory.
Note the fix is actually required earlier than the below fixes tag, but
will require a manual backport due to move from kmalloc to kmalloc_array.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes commit 057ac1acdfc4 ("iio: Use kmalloc_array() in iio_scan_mask_set()"). Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch fixes an obvious typo, which will cause erroneously returning the Peak
Voltage instead of the Peak Current.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xfrm_add_policy
-->verify_newpolicy_info //check the index provided by user with XFRM_POLICY_MAX
//In my case, the index is 0x6E6BB6, so it pass the check.
-->xfrm_policy_construct //copy the user's policy and set xfrm_policy_timer
-->xfrm_policy_insert
--> __xfrm_policy_link //use the orgin dir, in my case is 2
--> xfrm_gen_index //generate policy index, there is 0x6E6BB6
then xfrm_policy_timer be fired
xfrm_policy_timer
--> xfrm_policy_id2dir //get dir from (policy index & 7), in my case is 6
--> xfrm_policy_delete
--> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access
Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is
valid, to fix the issue.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e682adf021be ("xfrm: Try to honor policy index if it's supplied by user") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups") fixed
the issue for ipv4 ipmr:
ip_mroute_setsockopt() & ip_mroute_getsockopt() should not
access/set raw_sk(sk)->ipmr_table before making sure the socket
is a raw socket, and protocol is IGMP
The same fix should be done for ipv6 ipmr as well.
This patch can fix the panic caused by overwriting the same offset
as ipmr_table as in raw_sk(sk) when accessing other type's socket
by ip_mroute_setsockopt().
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred(). However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.
PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case. If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.
Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.
This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.
Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)
I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.
Also provide entropy regardless of CONFIG_NET_NS.
Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
A few places in mwifiex_uap_parse_tail_ies() perform memcpy()
unconditionally, which may lead to either buffer overflow or read over
boundary.
This patch addresses the issues by checking the read size and the
destination size at each place more properly. Along with the fixes,
the patch cleans up the code slightly by introducing a temporary
variable for the token size, and unifies the error path with the
standard goto statement.
Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16:
- The tail IEs are parsed in mwifiex_set_mgmt_ies, which looks for two
specific IEs rather than looping
- Check IE length against tail length after calling
cfg80211_find_vendor_ie(), but not after cfg80211_find_ie() since that
already does it
- On error, return without calling mwifiex_set_mgmt_beacon_data_ies()
- Drop inapplicable change to WMM IE handling
- Adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
the source descriptor entries contain the enough size for each type
and performs copying without checking the source size. This may lead
to read over boundary.
Fix this by putting the source size check in appropriate places.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in
a couple places without checking the destination size. Since the
source is given from user-space, this may trigger a heap buffer
overflow.
Fix it by putting the length check before performing memcpy().
This fix addresses CVE-2019-3846.
Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.
If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.
Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.
Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.
Ben Hutchings [Wed, 29 May 2019 17:02:44 +0000 (18:02 +0100)]
binder: Replace "%p" with "%pK" for stable
This was done as part of upstream commits fdfb4a99b6ab "8inder:
separate binder allocator structure from binder proc", 19c987241ca1
"binder: separate out binder_alloc functions", and 7a4408c6bd3e
"binder: make sure accesses to proc/thread are safe". However, those
commits made lots of other changes that are not suitable for stable.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Starting from commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client. See commit 10dce8af3422 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2d02a ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.
To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers
so if we would do such a change it will break a real user.
Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.
This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.
[ while porting to 3.16 xenbus conflict was trivially resolved in a way
that actually fixes /proc/xen/xenbus deadlock introduced in 3.14,
because original upstream commit 581d21a2d02a to fix xenbus deadlock
was not included into 3.16 . ]
Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.
This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.
The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.
However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.
The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:
Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.
Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.
FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:
Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:
I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:
1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
doing so would break many in-kernel nonseekable_open users which
actually use ppos in read/write handlers.
2. Add stream_open() to kernel to open stream-like non-seekable file
descriptors. Read and write on such file descriptors would never use
nor change ppos. And with that property on stream-like files read and
write will be running without taking f_pos lock - i.e. read and write
could be running simultaneously.
3. With semantic patch search and convert to stream_open all in-kernel
nonseekable_open users for which read and write actually do not
depend on ppos and where there is no other methods in file_operations
which assume @offset access.
4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
steam_open if that bit is present in filesystem open reply.
It was tempting to change fs/fuse/ open handler to use stream_open
instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and
write handlers
so if we would do such a change it will break a real user.
5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
from v3.14+ (the kernel where 9c225f2655 first appeared).
This will allow to patch OSSPD and other FUSE filesystems that
provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
in their open handler and this way avoid the deadlock on all kernel
versions. This should work because fs/fuse/ ignores unknown open
flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel
that is not aware of FOPEN_STREAM will be < v3.14 where just
FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
write deadlock.
This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.
Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.
The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ backport to 3.16: actually fixed deadlock on /proc/xen/xenbus as 581d21a2d02a was not backported to 3.16 ] Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect,
so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct,
otherwise, the dst refcnt will leak.
unregister_netdevice: waiting for lo to become free. Usage count = 1
v1->v2:
- use rcu_dereference_protected() instead of rcu_dereference_check(),
as suggested by Eric.
Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper)
ultimately depends on function roundup_pow_of_two.
If the amount of memory required by the QP is less than one page,
roundup_pow_of_two is called with argument zero. In this case, the
roundup_pow_of_two result is undefined.
Calling roundup_pow_of_two with a zero argument resulted in the
following stack trace:
UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1
Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015
Call Trace:
dump_stack+0x9a/0xeb
ubsan_epilogue+0x9/0x7c
__ubsan_handle_shift_out_of_bounds+0x254/0x29d
? __ubsan_handle_load_invalid_value+0x180/0x180
? debug_show_all_locks+0x310/0x310
? sched_clock+0x5/0x10
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x260
? find_held_lock+0x35/0x1e0
? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
Fix this by explicitly testing for zero, and returning one if the
argument is zero (assuming that the next higher power of 2 in this case
should be one).
Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to
guarantee that there are no FW commands in progress on the comm channel
(for VFs) or wrapped FW commands (on the PF) when SRIOV is active.
We do this by also taking the slave_cmd_mutex when SRIOV is active.
This is especially important when switching from event to polling, since we
free the command-context array during the switch. If there are FW commands
in progress (e.g., waiting for a completion event), the completion event
handler will access freed memory.
Since the decision to use comm_wait or comm_poll is taken before grabbing
the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the
slave_cmd_mutex as well (to guarantee that the decision to use events or
polling and the call to the appropriate cmd function are atomic).
Fixes: a7e1f04905e5 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns NULL of it fails.
Fixes: b356e978e92f ("sh_eth: add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This bug has apparently existed since the introduction of this function
in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").
As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().
Fixes: c9e6bc644e55 ("net: add gro_cells infrastructure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16:
- Adjust filename, context
- Return type is void] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Same reasons than the ones explained in commit 4179cb5a4c92
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")
netif_rx() or gro_cells_receive() must be called under a strict contract.
At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.
A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.
Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP
Virtual drivers do not have this guarantee, and must
therefore make the check themselves.
Otherwise we risk use-after-free and/or crashes.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The race occurs in __mkroute_output() when 2 threads lookup a dst:
CPU A CPU B
find_exception()
find_exception() [fnhe expires]
ip_del_fnhe() [fnhe is deleted]
rt_bind_exception()
In rt_bind_exception() it will bind a deleted fnhe with the new dst, and
this dst will get no chance to be freed. It causes a dev defcnt leak and
consecutive dmesg warnings:
unregister_netdevice: waiting for ethX to become free. Usage count = 1
Especially thanks Jon to identify the issue.
This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop
binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr
and daddr in rt_bind_exception().
It works as both ip_del_fnhe() and rt_bind_exception() are protected by
fnhe_lock and the fhne is freed by kfree_rcu().
Fixes: deed49df7390 ("route: check and remove route cache when we get route") Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The "cpu" variable comes from the sscanf() so Smatch marks it as
untrusted data. We can't pass a higher value than "nr_cpu_ids" to
cpu_possible() or it results in an out of bounds access.
Fixes: d68d82afd4c8 ("xen: implement CPU hotplugging") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
fls counts bits starting from 1 to 32 (returns 0 for zero argument). If
we add 1 we shift right one bit more and loose precision from divisor,
what cause function incorect results with some numbers.
Corrected code was tested in user-space, see bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202391
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:
struct virtio_scsi_ctrl_tmf
{
// Device-readable part
le32 type;
le32 subtype;
u8 lun[8];
le64 id;
// Device-writable part
u8 response;
}
The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".
The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It
results in the original scsi command payload (or writable buffers) added to
the tmf.
This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
A queue with a capacity of zero is clearly not a valid virtio queue.
Some emulators report zero queue size if queried with an invalid queue
index. Instead of crashing in this case let us just return -ENOENT. To
make that work properly, let us fix the notifier cleanup logic as well.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Dan Carpenter reports a potential NULL dereference in
get_swap_page_of_type:
Smatch complains that the NULL checks on "si" aren't consistent. This
seems like a real bug because we have not ensured that the type is
valid and so "si" can be NULL.
Add the missing check for NULL, taking care to use a read barrier to
ensure CPU1 observes CPU0's updates in the correct order:
CPU0 CPU1
alloc_swap_info() if (type >= nr_swapfiles)
swap_info[type] = p /* handle invalid entry */
smp_wmb() smp_rmb()
++nr_swapfiles p = swap_info[type]
Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before
CPU0's write to swap_info[type] and read NULL from swap_info[type].
Ying Huang noticed other places in swapfile.c don't order these reads
properly. Introduce swap_type_to_swap_info to encourage correct usage.
Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model
(see tools/memory-model/Documentation/explanation.txt).
This ordering need not be enforced in places where swap_lock is held
(e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles
and the swap_info array.
Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.16:
- Add swp_swap_info(), as done in upstream commit 0bcac06f27d7
"mm, swap: skip swapcache for swapin of synchronous device"
- Use ACCESS_ONCE() instead of {READ,WRITE}_ONCE()
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
While running KernelThreadSanitizer (ktsan) on upstream kernel with
trinity, we got a few reports from SyS_swapon, here is one of them:
Read of size 8 by thread T307 (K7621):
[< inlined >] SyS_swapon+0x3c0/0x1850 SYSC_swapon mm/swapfile.c:2395
[<ffffffff812242c0>] SyS_swapon+0x3c0/0x1850 mm/swapfile.c:2345
[<ffffffff81e97c8a>] ia32_do_call+0x1b/0x25
Looks like the swap_lock should be taken when iterating through the
swap_info array on lines 2392 - 2401: q->swap_file may be reset to
NULL by another thread before it is dereferenced for f_mapping.
But why is that iteration needed at all? Doesn't the claim_swapfile()
which follows do all that is needed to check for a duplicate entry -
FMODE_EXCL on a bdev, testing IS_SWAPFILE under i_mutex on a regfile?
Well, not quite: bd_may_claim() allows the same "holder" to claim the
bdev again, so we do need to use a different holder than "sys_swapon";
and we should not replace appropriate -EBUSY by inappropriate -EINVAL.
Index i was reused in a cpu loop further down: renamed cpu there.
Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When VM_NO_GUARD is not set area->size includes adjacent guard page,
thus for correct size checking get_vm_area_size() should be used, but
not area->size.
This fixes possible kernel oops when userspace tries to mmap an area on
1 page bigger than was allocated by vmalloc_user() call: the size check
inside remap_vmalloc_range_partial() accounts non-existing guard page
also, so check successfully passes but vmalloc_to_page() returns NULL
(guard page does not physically exist).
The following code pattern example should trigger an oops:
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.
The patches fixes generic tests 075 and 112 from the xfs-tests.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.
When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required. It clears ->offset1 but
*does not* clear ->offset.
Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.
This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
BUG: unable to handle kernel paging request at...
If we are unlucky, some innocent page will have the first 4 bytes
corrupted.
nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.
Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.
(Note that the commit hash in the Fixes tag is from the 'history'
tree - this bug predates git).
Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding")
Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654 Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently on lease break the client sets a caching level twice:
when oplock is detected and when oplock is processed. While the
1st attempt sets the level to the value provided by the server,
the 2nd one resets the level to None unconditionally.
This happens because the oplock/lease processing code was changed
to avoid races between page cache flushes and oplock breaks.
The commit c11f1df5003d534 ("cifs: Wait for writebacks to complete
before attempting write.") fixed the races for oplocks but didn't
apply the same changes for leases resulting in overwriting the
server granted value to None. Fix this by properly processing
lease breaks.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
[bwh: Backported to 3.16: drop change in smb311_operations] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.
Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].
Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.
Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: net_device pointer is called "net", confusingly] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013
sp : ec497e20 ip : ed608030 fp : ec497e3c
r10: 00000000 r9 : ec497f00 r8 : ed608030
r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780
r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ac48006a DAC: 00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
[<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
[<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
[<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
[<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
[<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
[<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
[<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
[<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
[<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
[<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
[<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
[<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)
[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem] Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com Fixes: 7549ae3e81cc ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.") Reported-by: Xing Gaopeng <xingaopeng@huawei.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
If we have to retransmit a request, we should ensure that we reinitialise
the sequence results structure, since in the event of a signal
we need to treat the request as if it had not been sent.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b46790f ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Fixes: 808f80b46790f ("Btrfs: update fix for read corruption of compressed and shared extents") Fixes: 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared extents") Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Stewart Smith <stewart@linux.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The wm831x_dcdc_ilim entries needs to be uA because it is used to compare
with min_uA and max_uA.
While at it also make the array const and change to use unsigned int.
Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
There are two other drivers that bind to mrvl,mmp-uart and both of them
assume register shift of 2 bits. There are device trees that lack the
property and rely on that assumption.
If this driver wins the race to bind to those devices, it should behave
the same as the older deprecated driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ashmem_pin() is calling range_shrink() without checking whether
range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex
held should be avoided because ashmem_shrink_scan() tries to hold it.
Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin()
and make range_alloc() not to fail.
This patch is mostly meant for backporting purpose for fuzz testing on
stable/distributor kernels, for there is a plan to remove this code in
near future.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The
entry matches vendor_id in root directory and model_id in unit
directory of configuration ROM for IEEE 1394 bus.
On the other hand, configuration ROM of Focusrite Liquid Saffire 56
has the same vendor_id and model_id. This device is an application of
TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be
bound to it randomly instead of ALSA dice driver. At present, drivers
in ALSA firewire stack can not handle this situation appropriately.
This commit uses more identical mod_alias for Focusrite Saffire Pro 10
I/O in ALSA bebob driver.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 042a829d bus_info_length 4, crc_length 42, crc 33437
404 31333934 bus_name "1394"
408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400)
40c 00130e01 company_id 00130e |
410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0
root directory
-----------------------------------------------------------------
414 0009d31c directory_length 9, crc 54044
418 04000014 hardware version
41c 0c0083c0 node capabilities per IEEE 1394
420 0300130e vendor
424 81000012 --> descriptor leaf at 46c
428 17000006 model
42c 81000016 --> descriptor leaf at 484
430 130120c2 version
434 d1000002 --> unit directory at 43c
438 d4000006 --> dependent info directory at 450
unit directory at 43c
-----------------------------------------------------------------
43c 0004707c directory_length 4, crc 28796
440 1200a02d specifier id: 1394 TA
444 13010001 version: AV/C
448 17000006 model
44c 81000013 --> descriptor leaf at 498
dependent info directory at 450
-----------------------------------------------------------------
450 000637c7 directory_length 6, crc 14279
454 120007f5 specifier id
458 13000001 version
45c 3affffc7 (immediate value)
460 3b100000 (immediate value)
464 3cffffc7 (immediate value)
468 3d600000 (immediate value)
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 040442e4 bus_info_length 4, crc_length 4, crc 17124
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00130e04 company_id 00130e |
410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9
root directory
-----------------------------------------------------------------
414 00065612 directory_length 6, crc 22034
418 0300130e vendor
41c 8100000a --> descriptor leaf at 444
420 17000006 model
424 8100000e --> descriptor leaf at 45c
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000418a0 directory_length 4, crc 6304
434 1200130e specifier id
438 13000001 version
43c 17000006 model
440 8100000f --> descriptor leaf at 47c
When doing top-down search the low_limit is not PAGE_SIZE but rather
max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr >
PAGE_SIZE.
Fixes: fba2369e6ceb ("mm: use vm_unmapped_area() on powerpc architecture") Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The scrub_ctx csum_list member must be initialized before scrub_free_ctx
is called. If the csum_list is not initialized beforehand, the
list_empty call in scrub_free_csums will result in a null deref if the
allocation fails in the for loop.
Fixes: a2de733c78fa ("btrfs: scrub") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Dan Robertson <dan@dlrobertson.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
[ad inf.]
Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".
Fix by using 0xfd as the maximum timeout.
Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.
[1] http://www.ti.com/lit/ug/spru680/spru680.pdf
Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
While freeing interrupt handlers in error path, don't assume that all
requested interrupts are per-processor interrupts and properly release
standard interrupts too.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC
deny the use of BATS for mapping memory.
This patch makes sure that the specific wii RAM mapping function
takes it into account as well.
Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram") Reviewed-by: Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Using the irq_gc_lock/irq_gc_unlock functions in the suspend and
resume functions creates the opportunity for a deadlock during
suspend, resume, and shutdown. Using the irq_gc_lock_irqsave/
irq_gc_unlock_irqrestore variants prevents this possible deadlock.
Fixes: 7f646e92766e2 ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[maz: tidied up $SUBJECT] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In the rare and unsupported case of a hostname list nfs_parse_devname
will modify dev_name. There is no need to modify dev_name as the all
that is being computed is the length of the hostname, so the computed
length can just be shorted.
Fixes: dc04589827f7 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When installing new memslots, KVM sets bit 0 of the generation number to
indicate that an update is in-progress. Until the update is complete,
there are no guarantees as to whether a vCPU will see the old or the new
memslots. Explicity prevent caching MMIO accesses so as to avoid using
an access cached from the old memslots after the new memslots have been
installed.
Note that it is unclear whether or not disabling caching during the
update window is strictly necessary as there is no definitive
documentation as to what ordering guarantees KVM provides with respect
to updating memslots. That being said, the MMIO spte code does not
allow reusing sptes created while an update is in-progress, and the
associated documentation explicitly states:
We do not want to use an MMIO sptes created with an odd generation
number, ... If KVM is unlucky and creates an MMIO spte while the
low bit is 1, the next access to the spte will always be a cache miss.
At the very least, disabling the per-vCPU MMIO cache during updates will
make its behavior consistent with the MMIO spte behavior and
documentation.
Fixes: 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The node obtained from of_find_node_by_path() has to be unreferenced
after the use, but we forgot it for the root node.
Fixes: f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support") Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
[bwh: Backported to 3.16:
- Move declaration of root to the top of the function as there is no
suitable block scope
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
We are currently passing the node index instead of the real node number.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: fbe96f29ce4b ("perf tools: Make perf.data more self-descriptive (v8)" Link: http://lkml.kernel.org/r/20190219095815.15931-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
It doesn't make sense and the USB core warns on each submit of such
URB, easily flooding the message buffer with tracebacks.
Analogous issue was fixed in regular libertas driver in commit 6528d8804780
("libertas: don't set URB_ZERO_PACKET on IN USB transfer").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Steve deRosier <derosier@cal-sierra.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Ackedy-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:
> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...
After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.
Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface") Signed-off-by: Michal Kazior <michal@plume.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Return -E2BIG when the transfer is incomplete. The upper layer does
not retry, so not doing that is incorrect behaviour.
Fixes: a2871c62e186 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..." Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In the original code before 181bf1e815a2 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815a2 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815a2 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: QiaoChong <qiaochong@loongson.cn>
[rewrite the commit message] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.
Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.
Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16:
- Include <linux/quotaops.h>
- dquot_initialize() does not return an erro
- Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.
Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: There's no support or test for filesytem encryption] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
projects / thirdparty / kernel / stable.git / log
