Merge branches 'clk-renesas', 'clk-cleanup', 'clk-hisilicon', 'clk-mediatek' and 'clk-bulk' into clk-next

 - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
   for a device
 - Fix some static checker errors in the hisilicon clk driver

* clk-renesas: (25 commits)
  clk: renesas: r8a779h0: Add RPC-IF clock
  clk: renesas: r8a779h0: Add SYS-DMAC clocks
  clk: renesas: r8a779h0: Add SDHI clock
  clk: renesas: r8a779h0: Add EtherAVB clocks
  clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
  clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
  clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
  clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
  clk: renesas: r8a779h0: Add I2C clocks
  clk: renesas: r8a779h0: Add watchdog clock
  clk: renesas: r8a779h0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Fix PCIe clock name
  clk: renesas: cpg-mssr: Add support for R-Car V4M
  clk: renesas: rcar-gen4: Add support for FRQCRC1
  clk: renesas: r9a07g043: Add clock and reset entries for CRU
  clk: renesas: r9a08g045: Add clock and reset support for watchdog
  dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
  dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
  dt-bindings: power: Add r8a779h0 SYSC power domain definitions
  dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
  ...

* clk-cleanup:
  clk: zynq: Prevent null pointer dereference caused by kmalloc failure
  clk: fractional-divider: Use bit operations consistently
  clk: fractional-divider: Move mask calculations out of lock
  clk: ti: dpll3xxx: use correct function names in kernel-doc
  clk: clocking-wizard: Remove redundant initialization of pointer div_addr
  clk: keystone: sci-clk: match func name comment to actual
  clk: cdce925: Remove redundant assignment to variable 'rate'
  MAINTAINERS: drop Sekhar Nori

* clk-hisilicon:
  clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
  clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
  clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

* clk-mediatek:
  clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
  clk: mediatek: add infracfg reset controller for mt7988
  dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
  dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
  dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
  dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
  clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
  clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
  clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
  clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()

* clk-bulk:
  clk: Provide managed helper to get and enable bulk clocks

clk: zynq: Prevent null pointer dereference caused by kmalloc failure

The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.

This patch uses a stack variable to replace the kmalloc().

Fixes: 0ee52b157b8e ("clk: zynq: Add clock controller driver")
Suggested-by: Michal Simek <michal.simek@amd.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240301084437.16084-1-duoming@zju.edu.cn
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fractional-divider: Use bit operations consistently

Use BIT() where makes sense. This alings usage of bit operations
in the same pieces of code. Moreover, strictly speaking by the
letter of the C standard, left shift of 1 by 31 bits is UB (undefined
behaviour), switching to BIT() addresses that as well.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240303120732.240355-1-andy.shevchenko@gmail.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fractional-divider: Move mask calculations out of lock

There is no need to calculate masks under the lock taken.
Move them out of it.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240303121410.240761-1-andy.shevchenko@gmail.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()

Add a label so that a bit of exception handling can be better reused
at the end of this function implementation.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/6a64e7b3-b1ce-46c4-9c85-89f731aee592@web.de
Reviewed-by: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: ti: dpll3xxx: use correct function names in kernel-doc

Use function names that match the implementation in kernel-doc comments
to avoid kernel-doc warnings:

dpll3xxx.c:938: warning: expecting prototype for omap3_non_core_dpll_save_context(). Prototype was for omap3_noncore_dpll_save_context() instead
dpll3xxx.c:967: warning: expecting prototype for omap3_core_dpll_restore_context(). Prototype was for omap3_noncore_dpll_restore_context() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tero Kristo <kristo@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20240115054739.4988-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: clocking-wizard: Remove redundant initialization of pointer div_addr

The pointer div_addr is being assigned a value that is never used, it is
being re-assigned a different value near the end of the function where
it is being read in the next statement. The initialization is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/clk/xilinx/clk-xlnx-clock-wizard.c:501:16: warning: Value stored
to 'div_addr' during its initialization is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240223134347.3908301-1-colin.i.king@gmail.com
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull more Renesas clk driver updates from Geert Uytterhoeven:

 - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
   R-Car V4M
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779h0: Add RPC-IF clock
  clk: renesas: r8a779h0: Add SYS-DMAC clocks
  clk: renesas: r8a779h0: Add SDHI clock
  clk: renesas: r8a779h0: Add EtherAVB clocks
  clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
  clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
  clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
  clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks

clk: keystone: sci-clk: match func name comment to actual

Correct the function name in the kernel-doc comment to match the
actual function name to avoid a kernel-doc warning:

drivers/clk/keystone/sci-clk.c:287: warning: expecting prototype for _sci_clk_get(). Prototype was for _sci_clk_build() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20240115001255.4124-1-rdunlap@infradead.org
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: cdce925: Remove redundant assignment to variable 'rate'

The variable 'rate' being assigned a value that is never read, the
assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/clk/clk-cdce925.c:104:3: warning: Value stored to 'rate' is
never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240216140132.2108665-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Provide managed helper to get and enable bulk clocks

Provide a managed devm_clk_bulk* wrapper to get and enable all
bulk clocks in order to simplify drivers that keeps all clocks
enabled for the time of driver operation.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Link: https://lore.kernel.org/r/20240220084046.23786-2-shradha.t@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: add infracfg reset controller for mt7988

Infracfg can also operate as reset controller, add support for it.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240201182409.39878-3-linux@fw-web.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs

Add reset constants for using as index in driver and dts.

Value is starting again from 0 because resets are used in another device
than existing constants.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240201182409.39878-2-linux@fw-web.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-4-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-3-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: mediatek: convert hifsys to the json-schema clock

This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Documented "#reset-cells" property
3. Dropped "syscon" as it was incorrectly used
4. Adjusted "compatible" and "reg" in example

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-2-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical

Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.

Fixes: 813c3b53b55b ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/fc157139e6b7f8dfb6430ac7191ba754027705e8.1708221995.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF

CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.

After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.

Fixes: 1eb8d61ac5c9 ("clk: mediatek: mt8183: Add back SSPM related clocks")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240219105125.956278-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()

'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.

Remove the redundant call.

Fixes: c50e2ea6507b ("clk: mediatek: mt7622-apmixedsys: Add .remove() callback for module build")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c553c2a5077757e4f7af0bb895acc43881cf62c.1704616152.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()

If an error occurs after mtk_alloc_clk_data(), mtk_free_clk_data() should
be called, as already done in the remove function.

Fixes: 54b7026f011e ("clk: mediatek: mt8135-apmixedsys: Convert to platform_driver and module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6cd6af61e5a91598068227f1f68cfcfde1507453.1704615011.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Link: https://lore.kernel.org/r/20240121142946.2796-1-erick.archer@gmx.com
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()

'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.

If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.

The best we can do, is to avoid this wrong release of memory.

Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.

Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

MAINTAINERS: drop Sekhar Nori

My TI e-mail address will become inactive soon. Drop it.
Add an entry to CREDITS file for work done on TI DaVinci
family SoCs.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240131093434.55652-1-nsekhar@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: r8a779h0: Add RPC-IF clock

Add the module clock used by the SPI Multi I/O Bus Controller (RPC-IF)
on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/07a72378ca64b44341af960f042a6efd41d10dc3.1708354355.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add SYS-DMAC clocks

Add the module clocks used by the Direct Memory Access Controllers for
System (SYS-DMAC) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0285ef5d0c0c9d232e196559c9130ab46733d7f7.1707915706.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add SDHI clock

Add the SDHI module clock, which is used by the SD Card/MMC Interface on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/3a604a6924043775c2ed0630b1c5c29be2d1a5b9.1707915642.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add EtherAVB clocks

Add the module clocks used by the Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a5b4252d9822ded3fd523bc35417306cae2ec2bd.1707661303.git.geert+renesas@glider.be

Merge tag 'renesas-clk-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Ignore all clocks which are assigned to a non-Linux system
 - Add watchdog clock on RZ/G3S
 - Add camera (CRU) clock and reset on RZ/G2UL
 - Add support for the R-Car V4M (R8A779H0) SoC
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779h0: Add I2C clocks
  clk: renesas: r8a779h0: Add watchdog clock
  clk: renesas: r8a779h0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Fix PCIe clock name
  clk: renesas: cpg-mssr: Add support for R-Car V4M
  clk: renesas: rcar-gen4: Add support for FRQCRC1
  clk: renesas: r9a07g043: Add clock and reset entries for CRU
  clk: renesas: r9a08g045: Add clock and reset support for watchdog
  dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
  dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
  dt-bindings: power: Add r8a779h0 SYSC power domain definitions
  dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
  clk: renesas: mstp: Remove obsolete clkdev registration
  clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system
  of: Add for_each_reserved_child_of_node()
  of: Add of_get_next_status_child() and makes more generic of_get_next
  of: Add __of_device_is_status() and makes more generic status check

clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable

Fix typo for sel_shdi variable.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240131102930.1841901-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux

The status configuration for SD1 mux clock is SEL_SDHI1_STS. Fix it.

Fixes: 16b86e5c03c5 ("clk: renesas: rzg2l: Refactor SD mux driver")
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240131102930.1841901-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779f0: Correct PFC/GPIO parent clock

According to the R-Car S4 Series Hardware User’s Manual Rev.0.81, the
parent clock of the Pin Function (PFC/GPIO) module clock is the CP
clock.

As this clock is not documented to exist on R-Car S4, use the CPEX clock
instead.

Fixes: 73421f2a48e6bd1d ("clk: renesas: r8a779f0: Add PFC clock")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f88ec4aede0eaf0107c8bb7b28ba719ac6cd418f.1706197415.git.geert+renesas@glider.be

clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks

According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.

Fix this by adding the missing CP clock, and correcting the PFC parents.

Fixes: f2afa78d5a0c0b0b ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033f0dde1 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add I2C clocks

Add the module clocks used by the I2C Bus Interfaces on the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7a76dadbce24c81dd2bee68765a0b41beca2d565.1706790236.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add watchdog clock

Add the module clock used by the RCLK Watchdog Timer on the Renesas
R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f1dbf0f3f484015f2e629d78b746cf377d6f6746.1706790015.git.geert+renesas@glider.be

clk: renesas: r8a779h0: Add PFC/GPIO clocks

Add the module clocks used by the Pin Function Controller (PFC) and
General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/a7d8f4111b87decb825db5ed310de8294f90b9f9.1706266196.git.geert+renesas@glider.be

clk: renesas: r8a779g0: Fix PCIe clock name

Fix a typo in the name of the module clock for the second PCIe channel.

Fixes: 5ab16198b431ca48 ("clk: renesas: r8a779g0: Add PCIe clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f582067564f357e2183d3db67b217084ecb51888.1706608032.git.geert+renesas@glider.be

clk: renesas: cpg-mssr: Add support for R-Car V4M

Initial CPG support for the R-Car V4M (R8A779H0).

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/c678ef7164e3777fa91572f72e47ef385cea64b8.1706194617.git.geert+renesas@glider.be

clk: renesas: rcar-gen4: Add support for FRQCRC1

R-Car V4H and V4M have a second Frequency Control Register C.
Add support for this by treating bit field offsets beyond 31 as
referring to the second register.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f64d5573a92a18505619ff0ff808d50cfc2bde55.1706194617.git.geert+renesas@glider.be

Merge tag 'renesas-r8a779h0-dt-binding-defs-tag' into renesas-clk-for-v6.9

Renesas R-Car V4M DT Binding Definitions

Clock and Power Domain definitions for the Renesas R-Car V4M (R8A779H0)
SoC, shared by driver and DT source files.

clk: renesas: r9a07g043: Add clock and reset entries for CRU

Add CRU clock and reset entries to CPG driver.

CRU_SYSCLK and CRU_VCLK clocks need to be turned ON/OFF in particular
sequence for the CRU block hence add these clocks to
r9a07g043_no_pm_mod_clks[] array and pass it as part of CPG data for
RZ/G2UL SoCs.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240123114415.290918-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a08g045: Add clock and reset support for watchdog

RZ/G3S has a watchdog module accessible by the Cortex-A core. Add clock
and reset support for it.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions

Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be

dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support

Document support for the Clock Pulse Generator (CPG) and Module Standby
Software Reset (MSSR) module on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/eb3cd02b62f3ca834df079a3f1e551d9414fe42a.1706194617.git.geert+renesas@glider.be

dt-bindings: power: Add r8a779h0 SYSC power domain definitions

Add power domain indices for the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/c5cbef71178cada761e9da7bcbb6f21334f93ef8.1706194617.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support

Document support for the System Controller (SYSC) in the R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6315cbd0b6e9b92a7914d98f397a2c663ad521c6.1706194617.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

clk: renesas: mstp: Remove obsolete clkdev registration

After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, all devices are registered from DT, so we can remove the
registration of clkdevs.

Add the missing #include <linux/slab.h>, which was included implicitly
through <linux/clkdev.h> before.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e98a6e47ebecc44fa41de6d88b4ed20c6efbd177.1705931322.git.geert+renesas@glider.be

clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system

Some boards might use Linux and another OS at the same time. In such
case, currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.

To avoid such situation, renesas-cpg-mssr tries to find
status = "reserved" devices (A), and adds CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).

Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf

"reserved"
Indicates that the device is operational, but should not be
used. Typically this is used for devices that are controlled
by another software component, such as platform firmware.

ex)
scif5: serial@e6f30000 {
...
(B) clocks = <&cpg CPG_MOD 202>,
 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
 <&scif_clk>;
...
(A) status = "reserved";
};

Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878r4ygfap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

of: Add for_each_reserved_child_of_node()

We would like to use for_each loop for status = "reserved" nodes.
Add for_each_reserved_child_of_node() for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87a5pegfau.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

of: Add of_get_next_status_child() and makes more generic of_get_next

Linux Kernel has of_get_next_available_child().
Add more generic of_get_next_status_child() to enable to use same
logic for other status.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87bk9ugfb0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

of: Add __of_device_is_status() and makes more generic status check

Linux Kernel has __of_device_is_available() / __of_device_is_fail(),
these are checking if the status was "okay" / "ok" / "fail" / "fail-".

Add more generic __of_device_is_status() function for these.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cyuagfba.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs

Pull header fix from Kent Overstreet:
 "Just one small fixup for the RT build"

* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
  spinlock: Fix failing build for PREEMPT_RT

bcachefs: Reduce would_deadlock restarts

We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.

This tweaks the reflink path to take extents btree locks in the right
order.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_trans_account_disk_usage_change()

The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.

This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_fs_usage_base

Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: BTREE_TRIGGER_ATOMIC

Add a new flag to be explicit about when we're running atomic triggers.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: drop to_text code for obsolete bps in alloc keys

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: eytzinger_for_each() declares loop iter

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>