[BUG]
fstrim on some btrfs only trims the unallocated space, not trimming any
space in existing block groups.
[CAUSE]
Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to
range [0, super->total_bytes). So later btrfs_trim_fs() will only be
able to trim block groups in range [0, super->total_bytes).
While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs
uses its logical address space, there is nothing limiting the location
where we put block groups.
For filesystem with frequent balance, it's quite easy to relocate all
block groups and bytenr of block groups will start beyond
super->total_bytes.
In that case, btrfs will not trim existing block groups.
[FIX]
Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs()
can get the unmodified range, which is normally set to [0, U64_MAX].
Reported-by: Chris Murphy <lists@colorremedies.com> Fixes: f4c697e6406d ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl") CC: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function btrfs_trim_fs() doesn't handle errors in a consistent way. If
error happens when trimming existing block groups, it will skip the
remaining blocks and continue to trim unallocated space for each device.
The return value will only reflect the final error from device trimming.
This patch will fix such behavior by:
1) Recording the last error from block group or device trimming
The return value will also reflect the last error during trimming.
Make developer more aware of the problem.
2) Continuing trimming if possible
If we failed to trim one block group or device, we could still try
the next block group or device.
3) Report number of failures during block group and device trimming
It would be less noisy, but still gives user a brief summary of
what's going wrong.
Such behavior can avoid confusion for cases like failure to trim the
first block group and then only unallocated space is trimmed.
Reported-by: Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add bg_ret and dev_ret to the messages ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we fail to start a transaction in btrfs_dev_replace_start, we leave
dev_replace->replace_start set to STARTED but clear ->srcdev and
->tgtdev. Later, that can result in an Oops in
btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED
implies that ->srcdev is valid.
Also fix error handling when the state is already STARTED or SUSPENDED
while starting. That, too, will clear ->srcdev and ->tgtdev even though
it doesn't own them. This should be an impossible case to hit since we
should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an
ASSERT there while we're at it.
Fixes: e93c89c1aaaaa (Btrfs: add new sources for device replace code) CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error") CC: <stable@vger.kernel.org> # v3.13 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
For certain crafted image, whose csum root leaf has missing backref, if
we try to trigger write with data csum, it could cause deadlock with the
following kernel WARN_ON():
[CAUSE]
That crafted image has missing backref for csum tree root leaf. And
when we try to allocate new tree block, since there is no
EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot
and use it.
The extent tree of the image looks like:
Normal image | This fuzzed image
----------------------------------+--------------------------------
BG 29360128 | BG 29360128
One empty slot | One empty slot 29364224: backref to UUID tree | 29364224: backref to UUID tree
Two empty slots | Two empty slots 29376512: backref to CSUM tree | One empty slot (bad type) <<< 29380608: backref to D_RELOC tree | 29380608: backref to D_RELOC tree
... | ...
Since bytenr 29376512 has no METADATA/EXTENT_ITEM, when btrfs try to
alloc tree block, it's an valid slot for btrfs.
And for finish_ordered_write, when we need to insert csum, we try to CoW
csum tree root.
By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K,
BG_OFFSET + 12K is already used by tree block COW for other trees, the
next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM
tree.
But due to the bad type, btrfs can recognize it and still consider it as
an empty slot, and will try to use it for csum tree CoW.
Then in the following call trace, we will try to lock the new tree
block, which turns out to be the old csum tree root which is already
locked:
btrfs_search_slot() called on csum tree root, which is at 29376512
|- btrfs_cow_block()
|- btrfs_set_lock_block()
| |- Now locks tree block 29376512 (old csum tree root)
|- __btrfs_cow_block()
|- btrfs_alloc_tree_block()
|- btrfs_reserve_extent()
| Now it returns tree block 29376512, which extent tree
| shows its empty slot, but it's already hold by csum tree
|- btrfs_init_new_buffer()
|- btrfs_tree_lock()
| Triggers WARN_ON(eb->lock_owner == current->pid)
|- wait_event()
Wait lock owner to release the lock, but it's
locked by ourself, so it will deadlock
[FIX]
This patch will do the lock_owner and current->pid check at
btrfs_init_new_buffer().
So above deadlock can be avoided.
Since such problem can only happen in crafted image, we will still
trigger kernel warning for later aborted transaction, but with a little
more meaningful warning message.
[CAUSE]
Extent tree corruption. In this particular case, reloc tree root's
owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is
corrupted and we failed the owner check in walk_up_tree().
[FIX]
It's pretty hard to take care of every extent tree corruption, but at
least we can remove such BUG_ON() and exit more gracefully.
And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share
the same root (which is obviously invalid), we needs to make
__del_reloc_root() more robust to detect such invalid sharing to avoid
possible NULL dereference as root->node can be NULL in this case.
Some qgroup trace events like btrfs_qgroup_release_data() and
btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is
not enabled.
This is caused by the lack of qgroup status check before calling some
qgroup functions. Thankfully the functions can handle quota disabled
case well and just do nothing for qgroup disabled case.
This patch will do earlier check before triggering related trace events.
And for enabled <-> disabled race case:
1) For enabled->disabled case
Disable will wipe out all qgroups data including reservation and
excl/rfer. Even if we leak some reservation or numbers, it will
still be cleared, so nothing will go wrong.
2) For disabled -> enabled case
Current btrfs_qgroup_release_data() will use extent_io tree to ensure
we won't underflow reservation. And for delayed_ref we use
head->qgroup_reserved to record the reserved space, so in that case
head->qgroup_reserved should be 0 and we won't underflow.
Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.
The segmentation fault happens because of a inline assembly being
generated as:
0x10000355c <tm_spd_gpr+492> lfs f0, 0(0)
This is reading memory position 0x0 and causing the segmentation fault.
This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:
[flt_4] "r" (&d)
Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.
This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.
Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.
Fix the synthetic event test case to remove event correctly.
If redirecting command to synthetic_event file without append
mode, it cleans up all existing events and execute (parse) the
command. This means "delete event" always fails to find the
target event.
Since previous synthetic event has a bug which doesn't return
-ENOENT even if it fails to find the deleting event, this test
passed. But fixing that bug, this test fails because this test
itself has a bug.
This fixes that bug by trying to delete event right after
adding an event, and use append mode redirection ('>>') instead
of normal redirection ('>').
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Cc: stable <stable@vger.kernel.org> # 4.0 Cc: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scm device must be present in order for the rmtfs driver to
configure memory permissions for the rmtfs memory region, so check that
it is probed before continuing.
Cc: stable@vger.kernel.org Fixes: fa65f8045137 ("soc: qcom: rmtfs-mem: Add support for assigning memory to remote") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Currently a failed allocation of channel->name leads to an
immediate return without freeing channel. Fix this by setting
ret to -ENOMEM and jumping to an exit path that kfree's channel.
Detected by CoverityScan, CID#1473692 ("Resource Leak")
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: stable@vger.kernel.org Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x0 is not callee-saved in the PCS. So there is no need to specify
-fcall-used-x0.
Clang doesn't currently support -fcall-used flags. This patch will help
building the kernel with clang.
Tested-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Tri Vo <trong@android.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).
While at it, also fix the related cec-node reference leak.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Cc: stable <stable@vger.kernel.org> # 4.8 Cc: Junzhi Zhao <junzhi.zhao@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The a->index is not the name of the internal amux entry,
but, instead a value from zero to the maximum number
of audio inputs.
As the actual available inputs depend on each board, build
it dynamically.
This is broken for a really long time. On a quick check,
since at least commit 195a4ef627e1 ("V4L/DVB (6585): Convert
em28xx to video_ioctl2") this was not implemented right.
The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.
While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.
This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset 3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.
The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of
the number of possible values, it requires the number of the maximum
value. In other words, the ARRAY_SIZE() value should be decremented,
otherwise it will go past the array bounds, as warned by KASAN:
[ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev]
[ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676
Follow the V4L2 spec, as warned by v4l2-compliance:
warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:
Cc: stable@vger.kernel.org Fixes: bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the wait for completion was interrupted, then make sure to cancel
any delayed work.
This can only happen if a transmit is waiting for a reply, and you press
Ctrl-C or reboot/poweroff or something like that which interrupts the
thread waiting for the reply and then proceeds to delete the CEC message.
Since the delayed work wasn't canceled, once it would trigger it referred
to stale data and resulted in a kernel oops.
Fixes: 7ec2b3b941a6 ("cec: add new tx/rx status bits to detect aborts/timeouts") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The calculation of the Signal Free Time in the framework was not
correct. If a message was received, then the next transmit should be
considered a New Initiator and use a shorter SFT value.
This was not done with the result that if both sides where continually
sending messages, they both could use the same SFT value and one side
could deny the other side access to the bus.
Note that this fix does not take the corner case into account where
a receive is in progress when you call adap_transmit.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the HDMI cable is disconnected or the CEC adapter is manually
unconfigured, then all pending transmits and wait-for-replies are
aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED).
If due to (usually) a driver bug a transmit never ends (i.e. the
transmit_done was never called by the driver), then when this times
out the message is marked with CEC_TX_STATUS_TIMEOUT.
This should not happen and is an indication of a driver bug.
Without a separate status bit for this it was impossible to detect
this from userspace.
The 'transmit timed out' kernel message is now a warning, so this
should be more prominent in the kernel log as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the size of hypercall buffers allocated via
/dev/xen/hypercall is limited to a default of 64 memory pages. For live
migration of guests this might be too small as the page dirty bitmask
needs to be sized according to the size of the guest. This means
migrating a 8GB sized guest is already exhausting the default buffer
size for the dirty bitmap.
There is no sensible way to set a sane limit, so just remove it
completely. The device node's usage is limited to root anyway, so there
is no additional DOS scenario added by allowing unlimited buffers.
While at it make the error path for the -ENOMEM case a little bit
cleaner by setting n_pages to the number of successfully allocated
pages instead of the target size.
Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).
So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.
The cec_phys_addr_validate() function will be moved to V4L2,
so use a simplified variant of that function in cec-api.c.
cec now no longer calls cec_phys_addr_validate() and it can
be safely moved to V4L2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.17 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is needed by both V4L2 and CEC, so move this to
cec.h as a static inline since there are no obvious shared
modules between the two subsystems.
This patch, together with the following ones, fixes a
dependency bug: if CEC_CORE is disabled, then building adv7604
(and other HDMI receivers) will fail because an essential
function is now stubbed out.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.17 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.
As pointed at:
https://bugzilla.kernel.org/show_bug.cgi?id=199323
This patch causes a bad effect on RPi. I suspect that the root
cause is at the USB out of tree RPi driver, with uses high priority
interrupts instead of normal ones. Anyway, as this patch
is mostly a cleanup, better to revert it.
When the OSD is on (i.e. vivid displays text on top of the test pattern), and
you enable hflip, then the driver crashes.
The cause turned out to be a division of a negative number by an unsigned value.
You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-(
Fixes: 3e14e7a82c1ef ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: <stable@vger.kernel.org> # for v4.1 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new of_get_compatible_child() helper to lookup the mdio child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/ Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask") Cc: stable@vger.kernel.org # 4.16+ Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IO-pgtable code relies on the driver TLB invalidation callbacks to
ensure that all page-table updates are visible to the IOMMU page-table
walker.
In the case that the page-table walker is cache-coherent, we cannot rely
on an implicit DSB from the DMA-mapping code, so we must ensure that we
execute a DSB in our tlb_add_flush() callback prior to triggering the
invalidation.
Cc: <stable@vger.kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Fixes: 2df7a25ce4a7 ("iommu/arm-smmu: Clean up DMA API usage") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AFU Information DVSEC capability is a means to extract common,
general information about all of the AFUs associated with a Function
independent of the specific functionality that each AFU provides.
Write in the AFU Index field allows to access to the descriptor data
for each AFU.
With the current code, we are not able to access to these specific data
when the index >= 1 because we are writing to the wrong location.
All requests to the data of each AFU are pointing to those of the AFU 0,
which could have impacts when using a card with more than one AFU per
function.
This patch fixes the access to the AFU Descriptor Data indexed by the
AFU Info Index field.
Use the new of_get_compatible_child() helper to lookup the usb sibling
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(non-sibling) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).
While at it, also fix the related phy-node reference leak.
Fixes: f5e4edb8c888 ("power: twl4030_charger: find associated phy by more reliable means.") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: NeilBrown <neilb@suse.de> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a problem with commit 311ee9c151ad ("rtc: cmos: allow using ACPI for
RTC alarm instead of HPET") defining `use_acpi_alarm' module parameter
even for non-ACPI platforms, which ignore it. Wrap the definition into
#ifdef CONFIG_ACPI and use a static inline wrapper function, hardcoded
to return 0 and consequently optimized away for !ACPI, following the
existing pattern with HPET handling functions.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a commit 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm
instead of HPET") `rtc-cmos' regression causing a link error:
drivers/rtc/rtc-cmos.o: In function `cmos_platform_probe':
rtc-cmos.c:(.init.text+0x33c): undefined reference to `hpet_rtc_interrupt'
rtc-cmos.c:(.init.text+0x3f4): undefined reference to `hpet_rtc_interrupt'
with non-ACPI platforms using this driver. The cause is the change of
the condition guarding the use of `hpet_rtc_interrupt'.
Previously it was a call to `is_hpet_enabled'. That function is static
inline and has a hardcoded 0 result for non-ACPI platforms, which imply
!HPET_EMULATE_RTC. Consequently the compiler optimized the whole block
away including the reference to `hpet_rtc_interrupt', which never made
it to the link stage.
Now the guarding condition is a call to `use_hpet_alarm', which is not
static inline and therefore the compiler may not be able to prove that
it actually always returns 0 for non-ACPI platforms. Consequently the
build breaks with an unsatisfied reference, because `hpet_rtc_interrupt'
is nowhere defined at link time.
Fix the problem by marking `use_hpet_alarm' inline. As the `inline'
keyword serves as an optimization hint rather than a requirement the
compiler is still free to choose whether inlining will be beneficial or
not for ACPI platforms.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 51ed73eb998a1c79a2b0e9bed68f75a8a2c93b9b ("rtc: ds1340: Add support
for trickle charger.") breaks ds1339 wakealarm support by limiting
accessible registers. Fix this.
The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.
Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20949/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a commit 8a8158c85e1e ("MIPS: memset.S: EVA & fault support for
small_memset") regression and remove assembly warnings:
arch/mips/lib/memset.S: Assembler messages:
arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
triggering with the CPU_DADDI_WORKAROUNDS option set and this code:
PTR_SUBU a2, t1, a0
jr ra
PTR_ADDIU a2, 1
This is because with that option in place the DADDIU instruction, which
the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn
expands to an LI/DADDU (or actually ADDIU/DADDU) sequence:
Correct this by switching off the `noreorder' assembly mode and letting
GAS schedule this jump's delay slot, as there is nothing special about
it that would require manual scheduling. With this change in place
correct code is produced:
PPC_INVALIDATE_ERAT is slbia IH=7 which is a new variant introduced
with POWER9, and the result is undefined on earlier CPUs.
Commits 7b9f71f974 ("powerpc/64s: POWER9 machine check handler") and d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on
POWER9") caused POWER7/8 code to use this instruction. Remove it. An
ERAT flush can be made by invalidatig the SLB, but before POWER9 that
requires a flush and rebolt.
Fixes: 7b9f71f974 ("powerpc/64s: POWER9 machine check handler") Fixes: d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on POWER9") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently on P9N DD2.1 we end up taking infinite TM facility
unavailable exceptions on the first TM usage by userspace.
In the special case of TM no suspend (P9N DD2.1), Linux is told TM is
off via CPU dt-ftrs but told to (partially) use it via
OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED. So HFSCR[TM] will be off from
dt-ftrs but we need to turn it on for the no suspend case.
This patch fixes this by enabling HFSCR TM in this case.
Cc: stable@vger.kernel.org # 4.15+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detaching of mark connector from fsnotify_put_mark() can race with
unmounting of the filesystem like:
CPU1 CPU2
fsnotify_put_mark()
spin_lock(&conn->lock);
...
inode = fsnotify_detach_connector_from_object(conn)
spin_unlock(&conn->lock);
generic_shutdown_super()
fsnotify_unmount_inodes()
sees connector detached for inode
-> nothing to do
evict_inode()
barfs on pending inode reference
iput(inode);
Resulting in "Busy inodes after unmount" message and possible kernel
oops. Make fsnotify_unmount_inodes() properly wait for outstanding inode
references from detached connectors.
Note that the accounting of outstanding inode references in the
superblock can cause some cacheline contention on the counter. OTOH it
happens only during deletion of the last notification mark from an inode
(or during unlinking of watched inode) and that is not too bad. I have
measured time to create & delete inotify watch 100000 times from 64
processes in parallel (each process having its own inotify group and its
own file on a shared superblock) on a 64 CPU machine. Average and
standard deviation of 15 runs look like:
So there's no statistically significant difference.
Fixes: 6b3f05d24d35 ("fsnotify: Detach mark from object list when last reference is dropped") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmz_fetch_mblock() called from dmz_get_mblock() has a race since the
allocation of the new metadata block descriptor and its insertion in
the cache rbtree with the READING state is not atomic. Two different
contexts requesting the same block may end up each adding two different
descriptors of the same block to the cache.
Another problem for this function is that the BIO for processing the
block read is allocated after the metadata block descriptor is inserted
in the cache rbtree. If the BIO allocation fails, the metadata block
descriptor is freed without first being removed from the rbtree.
Fix the first problem by checking again if the requested block is not in
the cache right before inserting the newly allocated descriptor,
atomically under the mblk_lock spinlock. The second problem is fixed by
simply allocating the BIO before inserting the new block in the cache.
Finally, since dmz_fetch_mblock() also increments a block reference
counter, rename the function to dmz_get_mblock_slow(). To be symmetric
and clear, also rename dmz_lookup_mblock() to dmz_get_mblock_fast() and
increment the block reference counter directly in that function rather
than in dmz_get_mblock().
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the ref field of struct dmz_mblock is always used with the
spinlock of struct dmz_metadata locked, there is no need to use an
atomic_t type. Change the type of the ref field to an unsigne
integer.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member). If the check fails, an error code EINVAL will be
returned. Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'. After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies. This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').
Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'. Also remove the
'data_size' check after the second copy because it is now unnecessary.
Cc: stable@vger.kernel.org Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.
Signed-off-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc_init_deleg() both allocates an nfs4_delegation, and
bumps the refcount on odstate. So after this point, we need to
put_clnt_odstate() and nfs4_put_stid() to not leave the odstate
refcount inappropriately bumped.
Signed-off-by: Andrew Elble <aweits@rit.edu> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We must check pg_error and call error_cleanup after any call to pg_doio.
Currently, we are skipping the unlock of a page if we encounter an error in
nfs_pageio_complete() before handing off the work to the RPC layer.
The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.
The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.
Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent node).
Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver") Fixes: d8e018c0b321 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Vincent Cuissard <cuissard@marvell.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:
a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
woken.
However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter. If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:
time
| irq_thread()
| irq_thread_fn()
| action->thread_fn()
| irq_finalize_oneshot()
| unmask_threaded_irq() /* interrupt is unmasked */
|
| /* interrupt fires, incorrectly deemed spurious */
|
| atomic_inc(&desc->threads_handled); /* counter is incremented */
v
This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.
In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.
In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.
Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().
log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.
We set backup intent on open so no need for this fallback.
See kernel bugzilla 201435
Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.
When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.
The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.
For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.
Building any configuration with 'make W=1' produces a warning:
kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]
When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.
Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.
At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.
Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.
Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.
Cc: Christopher Dall <christoffer.dall@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Fixes: 1e947bad0b63b351 ("arm64: KVM: Skip HYP setup when already running in HYP") Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.
Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hmm_mirror_unregister(), mm->hmm is set to NULL and then
mmu_notifier_unregister_no_release() is called. That creates a small
window where mmu_notifier can call mmu_notifier_ops with mm->hmm equal to
NULL. Fix this by first unregistering mmu notifier callbacks and then
setting mm->hmm to NULL.
Similarly in hmm_register(), set mm->hmm before registering mmu_notifier
callbacks so callback functions always see mm->hmm set.
Private ZONE_DEVICE pages use a special pte entry and thus are not
present. Properly handle this case in map_pte(), it is already handled in
check_pte(), the map_pte() part was lost in some rebase most probably.
Without this patch the slow migration path can not migrate back to any
private ZONE_DEVICE memory to regular memory. This was found after stress
testing migration back to system memory. This ultimatly can lead to the
CPU constantly page fault looping on the special swap entry.
Link: http://lkml.kernel.org/r/20181019160442.18723-3-jglisse@redhat.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts. This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.
This can be recreated as follows:
fallocate -l 2M /dev/hugepages/foo
echo 1 > /proc/sys/vm/drop_caches
fallocate -l 2M /dev/hugepages/foo
grep -i huge /proc/meminfo
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
HugePages_Total: 2048
HugePages_Free: 2047
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
ls -lsh /dev/hugepages/foo
4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo
To address this issue, dirty pages as they are added to pagecache. This
can easily be reproduced with fallocate as shown above. Read faulted
pages will eventually end up being marked dirty. But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.
Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com Fixes: 6bda666a03f0 ("hugepages: fold find_or_alloc_pages into huge_no_page()") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Mihcla Hocko <mhocko@suse.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here, vma->vm_file is NULL. mss->check_shmem_swap should be false in that
case, however for smaps_rollup, smap_gather_stats() can set the flag true
for one vma and leave it true for subsequent vma's where it should be
false.
To fix, reset the check_shmem_swap flag to false. There's also related
bug which sets mss->swap to shmem_swapped, which in the context of
smaps_rollup overwrites any value accumulated from previous vma's. Fix
that as well.
Note that the report suggests a regression between 4.17.19 and 4.19-rc7,
which makes the 4.19 series ending with commit 258f669e7e88 ("mm:
/proc/pid/smaps_rollup: convert to single value seq_file") suspicious.
But the mss was reused for rollup since 493b0e9d945f ("mm: add
/proc/pid/smaps_rollup") so let's play it safe with the stable backport.
These are unused, undesired, and have never actually been used by
anybody. The original authors of this code have changed their mind about
its inclusion. While originally proposed for disk encryption on low-end
devices, the idea was discarded [1] in favor of something else before
that could really get going. Therefore, this patch removes Speck.
Use the correct __le32 annotation and accessors to perform the
single round of AES encryption performed inside the AEGIS transform.
Otherwise, tcrypt reports:
alg: aead: Test 1 failed on encryption for aegis128-generic 00000000: 6c 25 25 4a 3c 10 1d 27 2b c1 d4 84 9a ef 7f 6e
alg: aead: Test 1 failed on encryption for aegis128l-generic 00000000: cd c6 e3 b8 a0 70 9d 8e c2 4f 6f fe 71 42 df 28
alg: aead: Test 1 failed on encryption for aegis256-generic 00000000: aa ed 07 b1 96 1d e9 e6 f2 ed b5 8e 1c 5f dc 1c
Omit the endian swabbing when folding the lengths of the assoc and
crypt input buffers into the state to finalize the tag. This is not
necessary given that the memory representation of the state is in
machine native endianness already.
This fixes an error reported by tcrypt running on a big endian system:
alg: aead: Test 2 failed on encryption for morus640-generic 00000000: a8 30 ef fb e6 26 eb 23 b0 87 dd 98 57 f3 e1 4b 00000010: 21
alg: aead: Test 2 failed on encryption for morus1280-generic 00000000: 88 19 1b fb 1c 29 49 0e ee 82 2f cb 97 a6 a5 ee 00000010: 5f
This patch fixes gcmaes_crypt_by_sg so that it won't use memory
allocation if the data doesn't cross a page boundary.
Authenticated encryption may be used by dm-crypt. If the encryption or
decryption fails, it would result in I/O error and filesystem corruption.
The function gcmaes_crypt_by_sg is using GFP_ATOMIC allocation that can
fail anytime. This patch fixes the logic so that it won't attempt the
failing allocation if the data doesn't cross a page boundary.
ghash is a keyed hash algorithm, thus setkey needs to be called.
Otherwise the following error occurs:
$ modprobe tcrypt mode=318 sec=1
testing speed of async ghash-generic (ghash-generic)
tcrypt: test 0 ( 16 byte blocks, 16 bytes per update, 1 updates):
tcrypt: hashing failed ret=-126
When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).
Fixes: 64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode") Cc: <stable@vger.kernel.org> # 2.6.20+ Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While fixing an out of bounds array access in known_siginfo_layout
reported by the kernel test robot it became apparent that the same bug
exists in siginfo_layout and affects copy_siginfo_from_user32.
The straight forward fix that makes guards against making this mistake
in the future and should keep the code size small is to just take an
unsigned signal number instead of a signed signal number, as I did to
fix known_siginfo_layout.
The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another. It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates. Neither of which are
guaranteed to be true.
Therefore replace caching the task_struct of the opener with
pid of the openers thread group id. All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.
Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.
The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess
will be killed just with less work, and less confusion. The work done
by force_sig is really only needed for handling syncrhonous
exceptions.
It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.
Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com> Cc: Michael Jung <mijung@gmx.net> Cc: Michael Ruettger <michael@ibmra.de> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com> Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices with slow interrupt handlers are significantly harming
performance when their interrupt vector is shared with a fast device.
Create a class code white list for devices with known fast interrupt
handlers and let all other devices share a single vector so that they
don't interfere with performance.
At the moment, only the NVM Express class code is on the list, but more
may be added if VMD users desire to use other low-latency devices in
these domains.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[lorenzo.pieralisi@arm.com: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jon Derrick: <jonathan.derrick@intel.com> Cc: "Heitke, Kenneth" <kenneth.heitke@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Device IDs to the Intel GPU "spurious interrupt" quirk table.
For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD. Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.
The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.
See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.
[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU. I hope
this is the last patch to add device IDs.]
Upon removal of the last device on a bus, the link_state of the bridge
leading to that bus is sought to be torn down by having pci_stop_dev()
call pcie_aspm_exit_link_state().
When ASPM was originally introduced by commit 7d715a6c1ae5 ("PCI: add
PCI Express ASPM support"), it determined whether the device being
removed is the last one by calling list_empty() on the bridge's
subordinate devices list. That didn't work because the device is only
removed from the list slightly later in pci_destroy_dev().
Commit 3419c75e15f8 ("PCI: properly clean up ASPM link state on device
remove") attempted to fix it by calling list_is_last(), but that's not
correct either because it checks whether the device is at the *end* of
the list, not whether it's the last one *left* in the list. If the user
removes the device which happens to be at the end of the list via sysfs
but other devices are preceding the device in the list, the link_state
is torn down prematurely.
The real fix is to move the invocation of pcie_aspm_exit_link_state() to
pci_destroy_dev() and reinstate the call to list_empty(). Remove a
duplicate check for dev->bus->self because pcie_aspm_exit_link_state()
already contains an identical check.
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.
Fixes: d23f3839fe97 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code "lchan = (lchan << 1) | ~lchan" for logical channel
intermediate decoding is wrong. The wrong intermediate decoding
result is {0xffffffff, 0xfffffffe}.
Fix it by replacing '~' with '!'. The correct intermediate
decoding result is {0x1, 0x2}.
The count of errors is picked up from bits 52:38 of the machine check
bank status register. But this is the count of *corrected* errors. If an
uncorrected error is being logged, the h/w sets this field to 0. Which
means that when edac_mc_handle_error() is called, the EDAC core will
carefully add zero to the appropriate uncorrected error counts.
uref->usage_index can be indirectly controlled by userspace, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This field is used as an array index by the hiddev_ioctl_usage() function,
when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or
HIDIOCSUSAGES.
For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to
field->maxusage and then used as an index to dereference field->usage
array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where
uref->usage_index is checked against an array maximum value and then it is
used as an index in an array.
This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the
traditional Spectre V1 first load:
copy_from_user(uref, user_arg, sizeof(*uref))
if (uref->usage_index >= field->maxusage)
goto inval;
i = field->usage[uref->usage_index].collection_index;
return i;
This patch fixes this by sanitizing field uref->usage_index before using it
to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in
HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load.
The DTK-2451 and DTH-2452 have a buggy HID descriptor which incorrectly
contains a Cintiq-like report, complete with pen tilt, rotation, twist, serial
number, etc. The hardware doesn't actually support this data but our driver
duitifully sets up the device as though it does. To ensure userspace has a
correct view of devices without updated firmware, we clean up this incorrect
data in wacom_setup_device_quirks.
We're also careful to clear the WACOM_QUIRK_TOOLSERIAL flag since its presence
causes the driver to wait for serial number information (via
wacom_wac_pen_serial_enforce) that never comes, resulting in
the pen being non-responsive.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Fixes: 8341720642 ("HID: wacom: Queue events with missing type/serial data for later processing") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901ef845fa2469c ("selinux: allow per-file labeling for cgroupfs")
broke mounting of cgroup2 under older SELinux policies which lacked
a genfscon rule for cgroup2. This prevents mounting of cgroup2 even
when SELinux is permissive.
Change the handling when there is no genfscon rule in policy to
just mark the inode unlabeled and not return an error to the caller.
This permits mounting and access if allowed by policy, e.g. to
unconfined domains.
I also considered changing the behavior of security_genfs_sid() to
never return -ENOENT, but the current behavior is relied upon by
other callers to perform caller-specific handling.
Fixes: 901ef845fa2469c ("selinux: allow per-file labeling for cgroupfs") CC: <stable@vger.kernel.org> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Tested-by: Waiman Long <longman@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible for ext4_show_quota_options() to try reading
s_qf_names[i] while it is being modified by ext4_remount() --- most
notably, in ext4_remount's error path when the original values of the
quota file name gets restored.
projects / thirdparty / kernel / stable.git / log
