Hans Verkuil [Tue, 28 Jan 2025 15:08:18 +0000 (16:08 +0100)]
media: omap3isp: drop wait_prepare/finish callbacks
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &video->queue_lock, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Note that the lock field of struct video_device is never set in this
driver, so the core v4l2_ioctl.c function v4l2_ioctl_get_lock() will never
take a lock.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
media: gspca: Add error handling for stv06xx_read_sensor()
In hdcs_init(), the return value of stv06xx_read_sensor() needs to be
checked. A proper implementation can be found in vv6410_dump(). Add a
check in loop condition and propergate error code to fix this issue.
media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode()
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: davinci: vpif: Fix memory leak in probe error path
If an error occurs during the initialization of `pdev_display`,
the allocated platform device `pdev_capture` is not released properly,
leading to a memory leak.
Adjust error path handling to fix the leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 43acb728bbc4 ("media: davinci: vpif: fix use-after-free on driver unbind") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Nikiforov <Dm1tryNk@yandex.ru> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline]
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705
Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304
CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
media: dt-bindings: Document Tegra186 and Tegra194 cec
These are already used in device trees, so describe them here. As the
driver only declares up through Tegra210, these must use a fallback
compatible of tegra210-cec.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Aaron Kling <webgeek1234@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Biju Das [Thu, 10 Apr 2025 05:52:21 +0000 (06:52 +0100)]
media: platform: exynos4-is: Use of_get_available_child_by_name()
Simplify fimc_md_is_isp_available() by using
of_get_available_child_by_name().
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Michael Chang [Tue, 8 Apr 2025 05:48:39 +0000 (13:48 +0800)]
media: nuvoton: npcm-video: Fix stuck due to no video signal error
Fix the issue when start_frame and detect_resolution
functions are executed at the same time, which may cause driver
stops capturing due to status of no video signal error.
Signed-off-by: Michael Chang <zhang971090220@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Always generate the resolution change event when the HW reports it and only
discard the streaming termination in case the new resolution is the same as
the old one. The old logic prevented events on
"no signal" -> "valid resolution" transitions as VIDIOC_QUERY_DV_TIMINGS
never updates the timings when there is no signal present.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: cxusb: no longer judge rbuf when the write fails
syzbot reported a uninit-value in cxusb_i2c_xfer. [1]
Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw()
succeeds and rlen is greater than 0, the read operation of usb_bulk_msg()
will be executed to read rlen bytes of data from the dvb device into the
rbuf.
In this case, although rlen is 1, the write operation failed which resulted
in the dvb read operation not being executed, and ultimately variable i was
not initialized.
Philipp Stanner [Fri, 4 Apr 2025 13:53:45 +0000 (15:53 +0200)]
media: tw5864: Replace deprecated PCI functions
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
pcim_iomap_regions(), furthermore, has so far wrongly been passed the
device's name instead of the driver's name, which makes that function's
debug prints useless.
Replace the deprecated function with pcim_iomap_region().
Define the driver name globally and use it where appropriate.
Signed-off-by: Philipp Stanner <phasta@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.c:1014:44: warning: 'DCEC' directive output may be truncated writing 4 bytes into a region of size between 0 and 53 [-Wformat-truncation=]
Resizing the 'buf' and 'cmd' arrays fixed the warning.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Gcc8 is convinced that we do not have enough space in dot_id_input_bin.
Extend the variable 17 bytes which is just used for debugging.
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:1336:9: warning: '(pipe' directive output may be truncated writing 5 bytes into a region of size between 1 and 74 [-Wformat-truncation=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Michał Mirosław [Fri, 28 Mar 2025 22:05:27 +0000 (23:05 +0100)]
media: videobuf2: check constants during build time
There is nothing a driver author can do fix in the driver to make the
global constants match. Since the assertion can be verified at build
time, don't return EINVAL at runtime for it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Ricardo Ribalda [Fri, 14 Mar 2025 12:39:40 +0000 (12:39 +0000)]
media: vivid: Fix requirement about webcam_intervals
Since commit f0b4a2c037c0 ("media: vivid: Extend FPS rates offered by
simulated webcam") we do not require twice as many intervals as sizes. In
fact, now we have 13 intervals and 6 sizes.
Fix the comment.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: vidtv: Terminating the subsequent process of initialization failure
syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1]
After PSI initialization fails, the si member is accessed again, resulting
in this uaf.
After si initialization fails, the subsequent process needs to be exited.
[1]
BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline]
BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524
Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059
Aakarsh Jain [Wed, 5 Mar 2025 05:53:08 +0000 (11:23 +0530)]
media: s5p-mfc: Support for handling RET_ENC_BUFFER_FULL interrupt
When output encoded buffer size provided by userspace
is insufficient with current encoding parameters, it
leads to RET_ENC_BUFFER_FULL interrupt which was not
handled in IRQ handler.
On handling of RET_ENC_BUFFER_FULL interrupt leads to
NAL_ABORT command from host to risc which in turn leads
to RET_NAL_ABORT interrupt. On receiving RET_NAL_ABORT
driver clears workbit and VB2 queues for cleaner closing
of MFC instance.
When user encounters "Call on DQBUF after unrecoverable
error", userspace should close fd and restart with larger
output encoder buffer size.
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: vim2m: Add parametized support for multiplanar API
Add support for the mulitiplaner API. The device can now act as
either a multi-planar or a single-planar device depending on a module
parameter, similar to the way vivid behaves.
Multiplanar support was added by implementing the appropate
try/get/set mplane functions, and by modifying the queue_setup() and
buf_prepare() functions to handle multiple planes. Implementation
was inspired by vivid.
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Clean up vidioc_try_fmt with the following changes:
1. remove unsused vim2m_fmt parameter
2. use clamp() macro to restrain width/height bounds
3. use ALIGN() macro to align width/height
4. use v4l2_fill_pixfmt to set bytesperline/sizeimage
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tarang Raval [Sat, 29 Mar 2025 05:43:30 +0000 (11:13 +0530)]
media: i2c: imx334: Use subdev state lock for synchronization
Replace the custom mutex in the imx334 driver with the V4L2 subdev state
lock for control synchronization. Initialize the subdev with
v4l2_subdev_init_finalize in imx334_probe, adding proper cleanup in error
paths and imx334_remove. This aligns the driver with V4L2 standards.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tarang Raval [Sat, 29 Mar 2025 05:43:29 +0000 (11:13 +0530)]
media: i2c: imx334: Enable runtime PM before sub-device registration
Runtime PM is fully initialized before calling
v4l2_async_register_subdev_sensor(). Moving the runtime PM initialization
earlier prevents potential access to an uninitialized or powered-down
device.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tarang Raval [Sat, 29 Mar 2025 05:43:28 +0000 (11:13 +0530)]
media: i2c: imx334: Fix runtime PM handling in remove function
pm_runtime_suspended() only checks the current runtime PM status and does
not modify it, making it ineffective in this context. This could result in
improper power management if the device remains active when removed.
This patch fixes the issue by introducing a check with
pm_runtime_status_suspended() to determine if the device is already
suspended. If it is not, it calls imx334_power_off() to power down the
device and then uses pm_runtime_set_suspended() to correctly update the
runtime PM status to suspended.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tarang Raval [Sat, 29 Mar 2025 05:43:27 +0000 (11:13 +0530)]
media: i2c: imx334: Fix power management and control handling
Some controls may need the sensor to be powered on to update their
values. Currently, only the exposure control does this. To ensure
proper handling, the power-up sequence is moved outside the switch-case.
Additionally, VBLANK control is now processed earlier so its changes
can correctly affect other controls.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tarang Raval [Sat, 29 Mar 2025 05:43:24 +0000 (11:13 +0530)]
media: i2c: imx334: Convert to CCI register access helpers
Use the new common CCI register access helpers to replace the private
register access helpers in the imx334 driver. This simplifies the driver
by reducing the amount of code.
Acked-by: Shravan Chippa <Shravan.Chippa@microchip.com> Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: intel/ipu6: Fix dma mask for non-secure mode
We use dma_get_mask() of auxdev device for calculate iova pfn limit.
This is always 32 bit mask as we do not initialize the mask (and we can
not do so, since dev->dev_mask is NULL anyways for auxdev).
Since we need 31 bit mask for non-secure mode use mmu_info->aperture_end
which is properly initialized to correct mask for both modes.
Fixes: daabc5c64703 ("media: ipu6: not override the dma_ops of device in driver") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Fri, 11 Oct 2024 10:56:44 +0000 (13:56 +0300)]
media: ccs: Don't complain about missing "clock-frequency" property
The clock frequency is often available via the clock itself and not read
by the driver from the "clock-frequency" property. Don't complain if the
property doesn't exist.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Tue, 15 Oct 2024 07:28:42 +0000 (10:28 +0300)]
media: ccs: Remove I²C write retry hack
The I²C retry hack has been there in order to address transient I²C
register write access issues on a few very old sensors and possibly it has
addressed also first I²C access problems (device not responding until a
certain amount of time has passed) but that is now separately handled. The
retry hack has a good potential for introducing hard to debug problems in
updating sensor settings while streaming. Remove it and instead pass those
rare errors to the user space -- which is also what virtually all other
drivers do.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use pm_runtime_put_autosuspend() instead of pm_runtime_put()
to allow autosuspend. Set a 1000ms autosuspend delay in
imx219_probe() to improve power efficiency.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
David Heidelberg [Mon, 21 Apr 2025 08:20:15 +0000 (10:20 +0200)]
media: dt-bindings: Convert Analog Devices ad5820 to DT schema
Convert the Analog Devices ad5820 to DT schema format.
Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add in the ov02e10 driver from the Intel IPU6 repository.
Signed-off-by: Jingjing Xiong <jingjing.xiong@intel.com> Co-developed-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Hao Yao <hao.yao@intel.com> Co-developed-by: Jim Lai <jim.lai@intel.com> Signed-off-by: Jim Lai <jim.lai@intel.com> Co-developed-by: You-Sheng Yang <vicamo.yang@canonical.com> Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Co-developed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Furthermore, the "name" parameter in pcim_iomap_regions() and its
successor, pcim_iomap_region(), should always reflect the driver name,
whereas currently it is the device's name.
Replace the deprecated functions with pcim_iomap_region() and pass the
actual driver name.
Signed-off-by: Philipp Stanner <phasta@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region(), and pass the actual driver name
to that function.
Signed-off-by: Philipp Stanner <phasta@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Niklas Söderlund [Mon, 10 Feb 2025 17:56:15 +0000 (18:56 +0100)]
media: rcar-csi2: Remove hack to detect NTSC content
In an effort to emulate support for SEQ_{TB,BT} in the R-Car VIN driver
on data captured from a CVBS input a hack was added to detect NTSC vs
PAL. This is ugly and as support for emulated SEQ_{TB,BT} have been
removed from the VIN driver remove the ugly hack.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Niklas Söderlund [Mon, 10 Feb 2025 17:56:14 +0000 (18:56 +0100)]
media: rcar-vin: Simplify the shutdown process
When shutting down capture extra care was needed to try and complete a
buffer that was involved in the emulated support for SEQ_{TB,BT}. This
was needed as a buffer might be queued once to the driver, but two times
to the hardware using different offsets.
As support for SEQ_{TB,BT} is now removed this shutdown process can be
greatly simplified. And in addition the state keeping of the VIN device
can be reduced to a single boolean value instead of keeping track of
this SEQ_{TB,BT} stopping dance.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Niklas Söderlund [Mon, 10 Feb 2025 17:56:13 +0000 (18:56 +0100)]
media: rcar-vin: Remove superfluous starting state
The STARTING state is superfluous and can be replaced with a check of
the sequence counter. The design idea is that the first buffer returned
from the driver have to come from the first hardware buffer slot.
Failing this the first 3 buffers queued to the device can be returned
out-of-order.
But it's much clearer to check the sequence counter to only return the
first buffer if it comes from hardware slot 0 then it is to carry around
an extra state just for this. Remove the unneeded state and replace it
with a simpler check.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Niklas Söderlund [Mon, 10 Feb 2025 17:56:12 +0000 (18:56 +0100)]
media: rcar-vin: Remove superfluous suspended state
The VIN state of suspended is superfluous. The logic was that when the
device were suspended and in a RUNNING state the state was set to
SUSPENDED. And when resuming it checked if the state is SUSPENDED and if
so started the device and changed it to RUNNING.
This can be avoided by simply checking if the device is in a RUNNING
state at both suspend and resume callbacks. Remove the unneeded
complexity.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Niklas Söderlund [Mon, 10 Feb 2025 17:56:11 +0000 (18:56 +0100)]
media: rcar-vin: Remove emulated SEQ_{TB,BT}
When the driver was converted from soc_camera software support for
V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT were added. This was done by
capturing twice to the same VB2 buffer, but at different offsets.
This turned out to be a bad idea and it never really worked properly in
all situations. As the hardware can't support this mode natively remove
trying to emulate it in software. It's still possible to capture TOP or
BOTTOM fields separately or both ALTERNATING. If user-space wants the
same fields in the same buffer the same hack to capture twice to the
same buffer can be done.
Removing this error prone emulated support pave ways in future work to
simplify the internal buffer handling and making it less fragile, while
enabling adding support for other features the hardware actually
supports.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tomi Valkeinen [Wed, 26 Mar 2025 11:34:03 +0000 (13:34 +0200)]
media: ti: cal: Add streams support
Add multiplexed streams support. CAL has 8 DMA-engines and can capture 8
separate streams at the same time. The driver filters the streams based
on CSI-2 virtual channel number and datatype. CAL may have (depending on
the SoC) two CSI-2 RX blocks, which share the 8 DMA-engines, so the
number of capturable streams does not change even if there are two CSI-2
RX blocks.
Add 8 video device nodes, each representing a single DMA-engine, and set
the number of source pads on CSI-2 RX blocks to 8. Each video node can be
connected to any of the source pads on either of the CSI-2 RX instances
using media links. CSI-2 RX block's subdevice internal routing is used
to route the incoming CSI-2 streams to one of the 8 source pads.
Only video data streams are supported at the moment.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Dongcheng Yan [Wed, 26 Mar 2025 05:24:47 +0000 (13:24 +0800)]
media: ipu-bridge: add ACPI HID for lt6911uxe bridge
Lontium lt6911uxe is a HDMI to CSI-2 bridge, without a fixed
link frequency.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Mon, 24 Mar 2025 13:01:09 +0000 (14:01 +0100)]
media: ov2740: Move pm-runtime cleanup on probe-errors to proper place
When v4l2_subdev_init_finalize() fails no changes have been made to
the runtime-pm device state yet, so the probe_error_media_entity_cleanup
rollback path should not touch the runtime-pm device state.
Instead this should be done from the probe_error_v4l2_subdev_cleanup
rollback path. Note the pm_runtime_xxx() calls are put above
the v4l2_subdev_cleanup() call to have the reverse call order of probe().
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Fixes: 289c25923ecd ("media: ov2740: Use sub-device active state") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make ipu6_buttress_ctrl constant since it is not modified any longer.
Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
media: intel/ipu6: Remove ipu6_buttress_ctrl started field
We assign to ->started field but newer read back, the field can be removed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Wed, 16 Apr 2025 11:08:56 +0000 (14:08 +0300)]
media: ccs-pll: Document the CCS PLL flags
Document the CCS PLL flags with short comments. The CCS spec has more
information on them while the added documentation helps finding the
relevant information in the CCS spec.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Wed, 5 Mar 2025 11:30:41 +0000 (13:30 +0200)]
media: ccs-pll: Print PLL calculator flags in the beginning
Print the PLL calculator flags right away when the PLL calculator is
called. Previously this was done only in a successful case and that didn't
really help solving a problem when one happened.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Wed, 16 Apr 2025 10:54:00 +0000 (13:54 +0300)]
media: ccs-pll: Drop LINK_DECOUPLED flag
The LINK_DECOUPLED flag isn't used by the PLL calculator other than
printing it. The number of OP/VT lanes are already printed in any case.
Thus drop the flag as it has no function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Wed, 19 Feb 2025 13:06:11 +0000 (15:06 +0200)]
media: ccs-pll: Correct the upper limit of maximum op_pre_pll_clk_div
The PLL calculator does a search of the PLL configuration space for all
valid OP pre-PLL clock dividers. The maximum did not take into account the
CCS PLL flag CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER in which case also odd PLL
dividers (other than 1) are valid. Do that now.
Fixes: 4e1e8d240dff ("media: ccs-pll: Add support for extended input PLL clock divider") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Tue, 18 Feb 2025 21:47:13 +0000 (23:47 +0200)]
media: ccs-pll: Start VT pre-PLL multiplier search from correct value
The ccs_pll_calculate_vt_tree() function does a search over possible VT
PLL configurations to find the "best" one. If the sensor does not support
odd pre-PLL divisors and the minimum value (with constraints) isn't 1,
other odd values could be errorneously searched (and selected) for the
pre-PLL divisor. Fix this.
Fixes: 415ddd993978 ("media: ccs-pll: Split limits and PLL configuration into front and back parts") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Sakari Ailus [Tue, 18 Feb 2025 21:43:58 +0000 (23:43 +0200)]
media: ccs-pll: Start OP pre-PLL multiplier search from correct value
The ccs_pll_calculate() function does a search over possible PLL
configurations to find the "best" one. If the sensor does not support odd
pre-PLL divisors and the minimum value (with constraints) isn't 1, other
odd values could be errorneously searched (and selected) for the pre-PLL
divisor. Fix this.
Fixes: 415ddd993978 ("media: ccs-pll: Split limits and PLL configuration into front and back parts") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Tue, 11 Mar 2025 11:48:44 +0000 (12:48 +0100)]
media: ov08x40: Extend sleep after reset to 5 ms
Some users are reporting that ov08x40_identify_module() fails
to identify the chip reading 0x00 as value for OV08X40_REG_CHIP_ID.
Intel's out of tree IPU6 drivers include some ov08x40 changes
including adding support for the reset GPIO for older kernels and
Intel's patch for this uses 5 ms. Extend the sleep to 5 ms following
Intel's example, this fixes the ov08x40_identify_module() problem.
The 3840x2160 mode operates with the imx334 reset values.
If we switch to other modes and then return to the 3840x2160 mode,
it should function correctly. so updated the mode_3840x2160_regs
array with the imx334 reset values.
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hao Yao [Tue, 11 Mar 2025 08:41:55 +0000 (16:41 +0800)]
media: ipu6: Remove workaround for Meteor Lake ES2
There was a hardware bug which need IPU6 driver to disable the ATS. This
workaround is not needed anymore as the bug was fixed in hardware level.
Additionally, Arrow Lake has the same IPU6 PCI ID and x86 stepping but
does not have the bug. Removing the Meteor Lake workaround is also
required for the driver to function on Arrow Lake.
Signed-off-by: Hao Yao <hao.yao@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver") Cc: stable@vger.kernel.org
[Sakari Ailus: Added tags and explanation of what is fixed.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Jai Luthra [Mon, 3 Mar 2025 16:02:22 +0000 (21:32 +0530)]
media: i2c: ds90ub9xx: Set serializer temperature ramp
For continuous PLL lock, it is recommended to extend the temperature
ramp down range of the DS90UB953-Q1 serializer based on the device's
initial temperature [1].
The serializer's die temperature is reported only to the deserializer
through the sensor status registers, and for UB9702, it is recommended
to set the temperature ramp during the link setup sequence, i.e. before
we even probe the ub953 driver.
Add support to the deserializer driver to configure ub953's temperature
ramp.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Jai Luthra [Mon, 3 Mar 2025 16:02:21 +0000 (21:32 +0530)]
media: i2c: ds90ub960: Configure serializer using back-channel
For DS90UB9702-Q1, it is recommended to configure some serializer
settings over the back-channel before the forward-channel is active.
This can only be done if the serializer's I2C address on the FPD-Link
bus is populated in the device tree node.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tomi Valkeinen [Mon, 3 Mar 2025 16:02:20 +0000 (21:32 +0530)]
media: i2c: ds90ub953: Move reg defines to a header file
Move UB953 register defines to a header file. This is done so that the
deserializer driver can access the defines, and do some early
serializer configuration.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The serializer's I2C address on the FPD-Link bus is usually communicated
to the deserializer once the forward-channel is established. But in some
cases it might be necessary to program the serializer (over the
back-channel) before the forward-channel is established.
This can be used e.g. to correct serializer configuration which
otherwise would prevent the FC to be enabled. To be able to communicate
to the serializer before the forward-channel is up, the deserializer
driver neds to know the default i2c address of the serializer.
Allow setting the serializer i2c address using the 'reg' property. This
is optional, and usually not needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update ub9702 RX port init sequence according to TI's latest
(non-public) documentation. The sequence is based on a Python script
provided by TI.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
projects / thirdparty / linux.git / log
