RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior.
Fixes: 962f3fee83a4 ("netvsc: add ethtool ops to get/set RSS key") Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com> Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1768212093-1594-1-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 7 Jan 2026 10:41:59 +0000 (10:41 +0000)]
net: add net.core.qdisc_max_burst
In blamed commit, I added a check against the temporary queue
built in __dev_xmit_skb(). Idea was to drop packets early,
before any spinlock was acquired.
if (unlikely(defer_count > READ_ONCE(q->limit))) {
kfree_skb_reason(skb, SKB_DROP_REASON_QDISC_DROP);
return NET_XMIT_DROP;
}
It turned out that HTB Qdisc has a zero q->limit.
HTB limits packets on a per-class basis.
Some of our tests became flaky.
Add a new sysctl : net.core.qdisc_max_burst to control
how many packets can be stored in the temporary lockless queue.
Also add a new QDISC_BURST_DROP drop reason to better diagnose
future issues.
Kery Qi [Thu, 8 Jan 2026 16:42:57 +0000 (00:42 +0800)]
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq().
Saeed Mahameed [Thu, 8 Jan 2026 21:26:57 +0000 (13:26 -0800)]
net/mlx5e: Restore destroying state bit after profile cleanup
Profile rollback can fail in mlx5e_netdev_change_profile() and we will
end up with invalid mlx5e_priv memset to 0, we must maintain the
'destroying' bit in order to gracefully shutdown even if the
profile/priv are not valid.
This patch maintains the previous state of the 'destroying' state of
mlx5e_priv after priv cleanup, to allow the remove flow to cleanup
common resources from mlx5_core to avoid FW fatal errors as seen below:
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg: mlx5_core 0000:00:03.0 enp0s3np0: failed to rollback to orig profile, ...
$ devlink dev reload pci/0000:00:03.0
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: poll_health:803:(pid 519): Fatal error 3 detected
mlx5_core 0000:00:03.0: firmware version: 28.41.1000
mlx5_core 0000:00:03.0: 0.000 Gb/s available PCIe bandwidth (Unknown x255 link)
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_health_try_recover:340:(pid 141): handling bad device here
mlx5_core 0000:00:03.0: mlx5_handle_bad_state:285:(pid 141): Expected to see disabled NIC but it is full driver
mlx5_core 0000:00:03.0: mlx5_error_sw_reset:236:(pid 141): start
mlx5_core 0000:00:03.0: NIC IFC still 0 after 4000ms.
Saeed Mahameed [Thu, 8 Jan 2026 21:26:55 +0000 (13:26 -0800)]
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to
reference the netdev and mdev associated with that struct. Instead,
store netdev directly into mlx5e_dev and get mdev from the containing
mlx5_adev aux device structure.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
Saeed Mahameed [Thu, 8 Jan 2026 21:26:54 +0000 (13:26 -0800)]
net/mlx5e: Fix crash on profile change rollback failure
mlx5e_netdev_change_profile can fail to attach a new profile and can
fail to rollback to old profile, in such case, we could end up with a
dangling netdev with a fully reset netdev_priv. A retry to change
profile, e.g. another attempt to call mlx5e_netdev_change_profile via
switchdev mode change, will crash trying to access the now NULL
priv->mdev.
This fix allows mlx5e_netdev_change_profile() to handle previous
failures and an empty priv, by not assuming priv is valid.
Pass netdev and mdev to all flows requiring
mlx5e_netdev_change_profile() and avoid passing priv.
In mlx5e_netdev_change_profile() check if current priv is valid, and if
not, just attach the new profile without trying to access the old one.
This fixes the following oops, when enabling switchdev mode for the 2nd
time after first time failure:
## Enabling switchdev mode first time:
mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
^^^^^^^^
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
Jakub Kicinski [Sat, 10 Jan 2026 22:35:32 +0000 (14:35 -0800)]
Merge tag 'linux-can-fixes-for-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-09
The first patch is by Szymon Wilczek and fixes a potential memory leak
in the etas_es58x driver.
The 2nd patch is by me, targets the gs_usb driver and fixes an URB
memory leak.
Ondrej Ille's patch fixes the transceiver delay compensation in the
ctucanfd driver, which is needed for bit rates higher than 1 Mbit/s.
* tag 'linux-can-fixes-for-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ctucanfd: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak
can: etas_es58x: allow partial RX URB allocation to succeed
====================
Jakub Kicinski [Sat, 10 Jan 2026 22:32:01 +0000 (14:32 -0800)]
Merge tag 'for-net-2026-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: enable PA Sync Lost event
* tag 'for-net-2026-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: enable PA Sync Lost event
====================
vsock/test: add a final full barrier after run all tests
If the last test fails, the other side still completes correctly,
which could lead to false positives.
Let's add a final barrier that ensures that the last test has finished
correctly on both sides, but also that the two sides agree on the
number of tests to be performed.
Fixes: 2f65b44e199c ("VSOCK: add full barrier between test cases") Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 8 Jan 2026 19:02:14 +0000 (19:02 +0000)]
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
====================
virtio-net: fix the deadlock when disabling rx NAPI
Calling napi_disable() on an already disabled napi can cause the
deadlock. In commit 4bc12818b363 ("virtio-net: disable delayed refill
when pausing rx"), to avoid the deadlock, when pausing the RX in
virtnet_rx_pause[_all](), we disable and cancel the delayed refill work.
However, in the virtnet_rx_resume_all(), we enable the delayed refill
work too early before enabling all the receive queue napis.
The deadlock can be reproduced by running
selftests/drivers/net/hw/xsk_reconfig.py with multiqueue virtio-net
device and inserting a cond_resched() inside the for loop in
virtnet_rx_resume_all() to increase the success rate. Because the worker
processing the delayed refilled work runs on the same CPU as
virtnet_rx_resume_all(), a reschedule is needed to cause the deadlock.
In real scenario, the contention on netdev_lock can cause the
reschedule.
Due to the complexity of delayed refill worker, in this series, we remove
it. When we fail to refill the receive buffer, we will retry in the next
NAPI poll instead.
- Patch 1: removes delayed refill worker schedule and retry refill
in next NAPI
- Patch 2, 3: removes and clean up unused delayed refill worker code
For testing, I've run the following tests with no issue so far
- selftests/drivers/net/hw/xsk_reconfig.py which sets up the XDP zerocopy
without providing any descriptors to the fill ring. As a result,
try_fill_recv will always fail.
- Send TCP packets from host to guest while guest is nearly OOM and some
try_fill_recv calls fail.
The delayed refill worker is removed which makes virtnet_rx_pause/resume
quite the same as __virtnet_rx_pause/resume. So remove
__virtnet_rx_pause/resume and move the code to virtnet_rx_pause/resume.
When we fail to refill the receive buffers, we schedule a delayed worker
to retry later. However, this worker creates some concurrency issues.
For example, when the worker runs concurrently with virtnet_xdp_set,
both need to temporarily disable queue's NAPI before enabling again.
Without proper synchronization, a deadlock can happen when
napi_disable() is called on an already disabled NAPI. That
napi_disable() call will be stuck and so will the subsequent
napi_enable() call.
To simplify the logic and avoid further problems, we will instead retry
refilling in the next NAPI poll.
Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/526b5396-459d-4d02-8635-a222d07b46d7@redhat.com Cc: stable@vger.kernel.org Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20260106150438.7425-2-minhquangbui99@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Fixes: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") Reported-by: syzbot+d4dda070f833dc5dc89a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695e88b2.050a0220.1c677c.036d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260107163109.4188620-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Li [Fri, 19 Dec 2025 02:43:09 +0000 (10:43 +0800)]
Bluetooth: hci_sync: enable PA Sync Lost event
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e587 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event") Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The related configuration register structure is described
in section 3.1.46 SSP_CFG of the CTU CAN FD
IP CORE Datasheet.
The analysis leading to the proper configuration
is described in section 2.8.3 Secondary sampling point
of the datasheet.
The change has been tested on AMD/Xilinx Zynq
with the next CTU CN FD IP core versions:
- 2.6 aka master in the "integration with Zynq-7000 system" test
6.12.43-rt12+ #1 SMP PREEMPT_RT kernel with CTU CAN FD git
driver (change already included in the driver repo)
- older 2.5 snapshot with mainline kernels with this patch
applied locally in the multiple CAN latency tester nightly runs
6.18.0-rc4-rt3-dut #1 SMP PREEMPT_RT
6.19.0-rc3-dut
The logs, the datasheet and sources are available at
https://canbus.pages.fel.cvut.cz/
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com> Signed-off-by: Pavel Pisa <pisa@fel.cvut.cz> Link: https://patch.msgid.link/20260105111620.16580-1-pisa@fel.cvut.cz Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
Szymon Wilczek [Tue, 23 Dec 2025 01:17:32 +0000 (02:17 +0100)]
can: etas_es58x: allow partial RX URB allocation to succeed
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open().
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Reported-by: syzbot+e8cb6691a7cf68256cb8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e8cb6691a7cf68256cb8 Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com> Reviewed-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20251223011732.39361-1-swilczek.lx@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
IPv6 tunnels call netdev_lockdep_set_classes() for each tunnel type,
while IPv4 currently centralizes netdev_lockdep_set_classes() call from
ip_tunnel_init().
Make ip_tunnel_init() a macro, so that we have different lockdep
classes per tunnel type.
Fixes: 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") Reported-by: syzbot+1240b33467289f5ab50b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695d439f.050a0220.1c677c.0347.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260106172426.1760721-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 6 Jan 2026 20:07:06 +0000 (12:07 -0800)]
MAINTAINERS: add docs and selftest to the TLS file list
The TLS MAINTAINERS entry does not seem to cover the selftest
or docs. Add those. While at it remove the unnecessary wildcard
from net/tls/, there are no subdirectories anyway so this change
has no impact today.
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
Jakub Kicinski [Thu, 8 Jan 2026 16:54:54 +0000 (08:54 -0800)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-06 (idpf)
This series contains updates to idpf driver only.
Emil fixes issues related to resets; among them timeouts, NULL pointer
dereferences, and memory leaks.
Sreedevi resolves issues around RSS; mainly involving operations when
the interface is down and resets. She also addresses some incomplete
cleanups for ntuple filters and interrupts.
Erik fixes incomplete output of ntuple filters.
Josh sets restriction of Rx buffer size to follow hardware restrictions.
Larysa adds check to prevent NULL pointer dereference when RDMA is not
enabled.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix aux device unplugging when rdma is not supported by vport
idpf: cap maximum Rx buffer size
idpf: Fix error handling in idpf_vport_open()
idpf: Fix RSS LUT NULL ptr issue after soft reset
idpf: Fix RSS LUT configuration on down interfaces
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
idpf: fix issue with ethtool -n command display
idpf: fix memory leak of flow steer list on rmmod
idpf: fix error handling in the init_task on load
idpf: fix memory leak in idpf_vc_core_deinit()
idpf: fix memory leak in idpf_vport_rel()
idpf: detach and close netdevs while handling a reset
idpf: keep the netdev when a reset fails
====================
Wei Fang [Wed, 7 Jan 2026 09:12:04 +0000 (17:12 +0800)]
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/ Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Jan 2026 16:49:24 +0000 (08:49 -0800)]
Merge tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Jakub Kicinski [Tue, 6 Jan 2026 16:34:26 +0000 (08:34 -0800)]
tools: ynl: don't install tests
make's install target is meant for installing the production
artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool
from under the main YNL install target. The install target
under tests/ is retained in case someone wants the tests
to be installed.
Fixes: 308b7dee3e5c ("tools: ynl: add YNL test framework") Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e4a ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7e8 ("net: af_unix:
implement splice for stream af_unix sockets").
Breno Leitao [Tue, 6 Jan 2026 14:31:14 +0000 (06:31 -0800)]
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
Xiang Mei [Tue, 6 Jan 2026 03:41:00 +0000 (20:41 -0700)]
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
`qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class
itself is active.
Two qfq_class objects may point to the same leaf_qdisc. This happens
when:
1. one QFQ qdisc is attached to the dev as the root qdisc, and
2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get()
/ qdisc_put()) and is pending to be destroyed, as in function
tc_new_tfilter.
When packets are enqueued through the root QFQ qdisc, the shared
leaf_qdisc->q.qlen increases. At the same time, the second QFQ
qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters
qfq_reset() with its own q->q.qlen == 0, but its class's leaf
qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate
an inactive aggregate and trigger a null-deref in qfq_deactivate_agg:
Linus Torvalds [Thu, 8 Jan 2026 15:44:48 +0000 (07:44 -0800)]
Merge tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build fix for HID-BPF (Benjamin Tissoires)
- fix for potential buffer overflow in i2c-hid (Kwok Kin Ming)
- a couple of selftests/hid fixes (Peter Hutterer)
- fix for handling pressure pads in hid-multitouch (Peter Hutterer)
- fix for potential NULL pointer dereference in intel-thc-hid (Even Xu)
- fix for interrupt delay control in intel-thc-hid (Even Xu)
- fix finger release detection on some VTL-class touchpads (DaytonCL)
- fix for correct enumeration on intel-ish-hid systems with no sensors
(Zhang Lixu)
- assorted device ID additions and device-specific quirks
* tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (21 commits)
HID: logitech: add HID++ support for Logitech MX Anywhere 3S
HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)
HID: quirks: work around VID/PID conflict for appledisplay
HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
selftests/hid: add a test for the Digitizer/Button Type pressurepad
selftests/hid: use a enum class for the different button types
selftests/hid: require hidtools 0.12
HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
hid: intel-thc-hid: Select SGL_ALLOC
selftests/hid: fix bpf compilations due to -fms-extensions
HID: bpf: fix bpf compilation with -fms-extensions
HID: Intel-thc-hid: Intel-thc: Fix wrong register reading
HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL
HID: intel-ish-hid: Reset enum_devices_done before enumeration
HID: intel-ish-hid: Update ishtp bus match to support device ID table
HID: Intel-thc-hid: Intel-thc: fix dma_unmap_sg() nents value
HID: playstation: Center initial joystick axes to prevent spurious events
...
Baochen Qiang [Mon, 22 Dec 2025 02:29:07 +0000 (10:29 +0800)]
wifi: mac80211: collect station statistics earlier when disconnect
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
During the transition to use channel contexts throughout, the
ability to do injection while in monitor mode concurrent with
another interface was lost, since the (virtual) monitor won't
have a chanctx assigned in this scenario.
It's harder to fix drivers that actually transitioned to using
channel contexts themselves, such as mt76, but it's easy to do
those that are (still) just using the emulation. Do that.
Miri Korenblit [Wed, 7 Jan 2026 13:37:36 +0000 (14:37 +0100)]
wifi: mac80211: don't iterate not running interfaces
for_each_chanctx_user_* was introdcued as a replacement for
for_each_sdata_link, which visits also other chanctx users that are not
link.
for_each_sdata_link skips not running interfaces, do the same for
for_each_chanctx_user_*
Benjamin Berg [Wed, 7 Jan 2026 13:36:51 +0000 (14:36 +0100)]
wifi: mac80211_hwsim: fix typo in frequency notification
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif.
Fixes: a37a6f54439b ("wifi: mac80211_hwsim: Add simulation support for NAN device") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260107143652.7dab2035836f.Iacbaf7bb94ed5c14a0928a625827e4137d8bfede@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Eric Dumazet [Thu, 8 Jan 2026 10:19:27 +0000 (10:19 +0000)]
wifi: avoid kernel-infoleak from struct iw_point
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space.
Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c") Reported-by: syzbot+bfc7323743ca6dbcc3d3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HID: logitech: add HID++ support for Logitech MX Anywhere 3S
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)
Wireless/new version of the Elecom trackball mouse M-XT3DRBK has a
product id that differs from the existing M-XT3DRBK.
The report descriptor format also seems to have changed and matches
other (newer?) models instead (except for six buttons instead of eight).
This patch follows the same format as the patch for the M-XT3URBK (018F)
by Naoki Ueki (Nov 3rd 2025) to enable the sixth mouse button.
dmesg output:
[ 292.074664] usb 1-2: new full-speed USB device number 7 using xhci_hcd
[ 292.218667] usb 1-2: New USB device found, idVendor=056e, idProduct=018c, bcdDevice= 1.00
[ 292.218676] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 292.218679] usb 1-2: Product: ELECOM TrackBall Mouse
[ 292.218681] usb 1-2: Manufacturer: ELECOM
René Rebe [Fri, 28 Nov 2025 12:46:41 +0000 (13:46 +0100)]
HID: quirks: work around VID/PID conflict for appledisplay
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display") Signed-off-by: René Rebe <rene@exactco.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Kwok Kin Ming [Wed, 31 Dec 2025 18:18:26 +0000 (02:18 +0800)]
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Peter Hutterer [Sun, 21 Dec 2025 23:43:37 +0000 (09:43 +1000)]
selftests/hid: add a test for the Digitizer/Button Type pressurepad
We have to resort to a bit of a hack: python-libevdev gets the
properties from libevdev at module init time. If libevdev hasn't been
rebuilt with the new property it won't be automatically populated. So we
hack around this by constructing the property manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Peter Hutterer [Sun, 21 Dec 2025 23:43:36 +0000 (09:43 +1000)]
selftests/hid: use a enum class for the different button types
Instead of multiple spellings of a string-provided argument, let's make
this a tad more type-safe and use an enum here.
And while we do this fix the two wrong devices:
- elan_04f3_313a (HP ZBook Fury 15) is discrete button pad
- dell_044e_1220 (Dell Precision 7740) is a discrete button pad
Peter Hutterer [Sun, 21 Dec 2025 23:43:35 +0000 (09:43 +1000)]
selftests/hid: require hidtools 0.12
Not all our tests really require it but since it's likely pip-installed
anyway it's trivial to require the new version, just in case we want to
start cleaning up other bits.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Peter Hutterer [Sun, 21 Dec 2025 23:43:34 +0000 (09:43 +1000)]
HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type
A Digitizer/Button Type value of 1 indicates the device is a
pressurepad, see
https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Chris Chiu [Fri, 2 Jan 2026 06:56:43 +0000 (06:56 +0000)]
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
selftests/hid: fix bpf compilations due to -fms-extensions
Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
HID: bpf: fix bpf compilation with -fms-extensions
Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
====================
net: netdevsim: fix inconsistent carrier state after link/unlink
This series fixes netdevsim's inconsistent behavior between carrier
and link/unlink state.
More specifically, this fixes a bug that the carrier goes DOWN although
two netdevsim were peered, depending on the order of peering and ifup.
Especially in a NetworkManager-enabled environment, netdevsim test fails
because of this.
The first patch fixes the bug itself in netdevsim/bus.c by adding
netif_carrier_on() into a proper function. The second patch adds a
regression test for this bug.
====================
Yohei Kojima [Mon, 5 Jan 2026 15:17:33 +0000 (00:17 +0900)]
selftests: netdevsim: add carrier state consistency test
This commit adds a test case for netdevsim carrier state consistency.
Specifically, the added test verifies the carrier state during the
following operations:
1. Unlink two netdevsims
2. ifdown one netdevsim, then ifup again
3. Link the netdevsims again
4. ifdown one netdevsim, then ifup again
These steps verifies that the carrier is UP iff two netdevsims are
linked and ifuped.
Yohei Kojima [Mon, 5 Jan 2026 15:17:32 +0000 (00:17 +0900)]
net: netdevsim: fix inconsistent carrier state after link/unlink
This patch fixes the edge case behavior on ifup/ifdown and
linking/unlinking two netdevsim interfaces:
1. unlink two interfaces netdevsim1 and netdevsim2
2. ifdown netdevsim1
3. ifup netdevsim1
4. link two interfaces netdevsim1 and netdevsim2
5. (Now two interfaces are linked in terms of netdevsim peer, but
carrier state of the two interfaces remains DOWN.)
This inconsistent behavior is caused by the current implementation,
which only cares about the "link, then ifup" order, not "ifup, then
link" order. This patch fixes the inconsistency by calling
netif_carrier_on() when two netdevsim interfaces are linked.
This patch fixes buggy behavior on NetworkManager-based systems which
causes the netdevsim test to fail with the following error:
# timeout set to 600
# selftests: drivers/net/netdevsim: peer.sh
# 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only
# 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out
# 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1:1234: Connection timed out
# expected 3 bytes, got 0
# 2025/12/25 00:56:17 socat[9109] W exiting on signal 15
not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1
This patch also solves timeout on TCP Fast Open (TFO) test in
NetworkManager-based systems because it also depends on netdevsim's
carrier consistency.
Shivani Gupta [Mon, 5 Jan 2026 00:59:05 +0000 (00:59 +0000)]
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
syzbot reported a crash in tc_act_in_hw() during netns teardown where
tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action
pointer, leading to an invalid dereference.
Guard against ERR_PTR entries when iterating the action IDR so teardown
does not call tc_act_in_hw() on an error pointer.
net: sfp: return the number of written bytes for smbus single byte access
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db94 ("net: phy: sfp: Add support for SMBus module access") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 4 Jan 2026 09:39:52 +0000 (11:39 +0200)]
Revert "dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable"
This reverts commit 926eae604403acfa27ba5b072af458e87e634a50, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae604403 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable") Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Larysa Zaremba [Mon, 17 Nov 2025 07:03:49 +0000 (08:03 +0100)]
idpf: fix aux device unplugging when rdma is not supported by vport
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device.
Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy") Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Joshua Hay [Mon, 3 Nov 2025 21:20:36 +0000 (13:20 -0800)]
idpf: cap maximum Rx buffer size
The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.
Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.
Fixes: 74d1412ac8f37 ("idpf: use libeth Rx buffer management for payload buffer") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: David Decotigny <ddecotig@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sreedevi Joshi [Tue, 2 Dec 2025 23:12:46 +0000 (17:12 -0600)]
idpf: Fix error handling in idpf_vport_open()
Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sreedevi Joshi [Mon, 24 Nov 2025 18:47:50 +0000 (12:47 -0600)]
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
Sreedevi Joshi [Mon, 24 Nov 2025 18:47:49 +0000 (12:47 -0600)]
idpf: Fix RSS LUT configuration on down interfaces
RSS LUT provisioning and queries on a down interface currently return
silently without effect. Users should be able to configure RSS settings
even when the interface is down.
Fix by maintaining RSS configuration changes in the driver's soft copy and
deferring HW programming until the interface comes up.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sreedevi Joshi [Mon, 24 Nov 2025 18:47:48 +0000 (12:47 -0600)]
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.
Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.
Steps to reproduce:
** Load idpf driver; interfaces will be created
modprobe idpf
** Before bringing the interfaces up, turn rxhash off
ethtool -K eth2 rxhash off
Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops") Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ethtool -n is executed on an interface to display the flow steering
rules, "rxclass: Unknown flow type" error is generated.
The flow steering list maintained in the driver currently stores only the
location and q_index but other fields of the ethtool_rx_flow_spec are not
stored. This may be enough for the virtchnl command to delete the entry.
However, when the ethtool -n command is used to query the flow steering
rules, the ethtool_rx_flow_spec returned is not complete causing the
error below.
Resolve this by storing the flow spec (fsp) when rules are added and
returning the complete flow spec when rules are queried.
Also, change the return value from EINVAL to ENOENT when flow steering
entry is not found during query by location or when deleting an entry.
Add logic to detect and reject duplicate filter entries at the same
location and change logic to perform upfront validation of all error
conditions before adding flow rules through virtchnl. This avoids the
need for additional virtchnl delete messages when subsequent operations
fail, which was missing in the original upstream code.
Example:
Before the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
rxclass: Unknown flow type
rxclass: Unknown flow type
After the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
Filter: 0
Rule Type: TCP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Filter: 1
Rule Type: UDP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Fixes: ada3e24b84a0 ("idpf: add flow steering support") Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com> Co-developed-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads.
Fixes: ada3e24b84a0 ("idpf: add flow steering support") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Emil Tantilov [Fri, 21 Nov 2025 00:12:18 +0000 (16:12 -0800)]
idpf: fix error handling in the init_task on load
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Reported-by: Vivek Kumar <iamvivekkumar@google.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fixes: 6aa53e861c1a ("idpf: implement get LAN MMIO memory regions") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Emil Tantilov [Fri, 21 Nov 2025 00:12:15 +0000 (16:12 -0800)]
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Emil Tantilov [Fri, 21 Nov 2025 00:12:14 +0000 (16:12 -0800)]
idpf: keep the netdev when a reset fails
During a successful reset the driver would re-allocate vport resources
while keeping the netdevs intact. However, in case of an error in the
init task, the netdev of the failing vport will be unregistered,
effectively removing the network interface:
ip -br a
ens801f0d1 DOWN
ens801f0d2 DOWN
ens801f0d3 DOWN
Re-shuffle the logic in the error path of the init task to make sure the
netdevs remain intact. This will allow the driver to attempt recovery via
subsequent resets, provided the FW is still functional.
The main change is to make sure that idpf_decfg_netdev() is not called
should the init task fail during a reset. The error handling is
consolidated under unwind_vports, as the removed labels had the same
cleanup logic split depending on the point of failure.
Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 6 Jan 2026 17:12:52 +0000 (09:12 -0800)]
Merge tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes for stable that arrived after the merge window:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot"
* tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: net ref data still needs to be freed even if net hasn't startup
nfsd: check that server is running in unlock_filesystem
nfsd: use correct loop termination in nfsd4_revoke_states()
nfsd: provide locking for v4_end_grace
NFSD: Fix permission check for read access to executable-only files
NFSD: Remove NFSERR_EAGAIN
Mohammad Heib [Sun, 4 Jan 2026 21:31:01 +0000 (23:31 +0200)]
net: fix memory leak in skb_segment_list for GRO packets
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e057 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().
Fixes: ed4cccef64c1 ("gro: fix ownership transfer") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sun, 4 Jan 2026 16:52:32 +0000 (08:52 -0800)]
netlink: specs: netdev: clarify the page pool API a little
The phrasing of the page-pool-get doc is very confusing.
It's supposed to highlight that support depends on the driver
doing its part but it sounds like orphaned page pools won't
be visible.
The description of the ifindex is completely wrong.
We move the page pool to loopback and skip the attribute if
ifindex is loopback.
net/sched: act_mirred: Fix leak when redirecting to self on egress
Whenever a mirred redirect to self on egress happens, mirred allocates a
new skb (skb_to_send). The loop to self check was done after that
allocation, but was not freeing the newly allocated skb, causing a leak.
Fix this by moving the if-statement to before the allocation of the new
skb.
The issue was found by running the accompanying tdc test in 2/2
with config kmemleak enabled.
After a few minutes the kmemleak thread ran and reported the leak coming from
mirred.
====================
vsock: Fix SO_ZEROCOPY on accept()ed vsocks
vsock has its own handling of setsockopt(SO_ZEROCOPY). Which works just
fine unless socket comes from a call to accept(). Because
SOCK_CUSTOM_SOCKOPT flag is missing, attempting to set the option always
results in errno EOPNOTSUPP.
====================
Linus Torvalds [Mon, 5 Jan 2026 22:10:48 +0000 (14:10 -0800)]
Merge tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential deadlock due to mismatching transaction states when
waiting for the current transaction
- fix squota accounting with nested snapshots
- fix quota inheritance of qgroups with multiple parent qgroups
- fix NULL inode pointer in evict tracepoint
- fix writes beyond end of file on systems with 64K page size and 4K
block size
- fix logging of inodes after exchange rename
- fix use after free when using ref_tracker feature
- space reservation fixes
* tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix reservation leak in some error paths when inserting inline extent
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
btrfs: always detect conflicting inodes when logging inode refs
btrfs: fix beyond-EOF write handling
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
btrfs: fix NULL dereference on root when tracing inode eviction
btrfs: qgroup: update all parent qgroups when doing quick inherit
btrfs: fix qgroup_snapshot_quick_inherit() squota bug
projects / thirdparty / linux.git / log
