Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been proven on practice that at least Windows Server 2019 tries
using HVCALL_SEND_IPI_EX in 'XMM fast' mode when it has more than 64 vCPUs
and it needs to send an IPI to a vCPU > 63. Similarly to other XMM Fast
hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}{,_EX}), this
information is missing in TLFS as of 6.0b. Currently, KVM returns an error
(HV_STATUS_INVALID_HYPERCALL_INPUT) and Windows crashes.
Note, HVCALL_SEND_IPI is a 'standard' fast hypercall (not 'XMM fast') as
all its parameters fit into RDX:R8 and this is handled by KVM correctly.
Cc: stable@vger.kernel.org # 5.14.x: 3244867af8c0: KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req Cc: stable@vger.kernel.org # 5.14.x Fixes: d8f5537a8816 ("KVM: hyper-v: Advertise support for fast XMM hypercalls") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When TLB flush hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX are
issued in 'XMM fast' mode, the maximum number of allowed sparse_banks is
not 'HV_HYPERCALL_MAX_XMM_REGISTERS - 1' (5) but twice as many (10) as each
XMM register is 128 bit long and can hold two 64 bit long banks.
Cc: stable@vger.kernel.org # 5.14.x Fixes: 5974565bc26d ("KVM: x86: kvm_hv_flush_tlb use inputs from XMM registers") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-3-seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
Move the check for an invalid root out of kvm_tdp_mmu_get_root() and into
the one place it actually matters, tdp_mmu_next_root(), as the other user
already has an implicit validity check. A future bug fix will need to
get references to invalid roots to honor mmu_notifier requests; there's
no point in forcing what will be a common path to open code getting a
reference to a root.
No functional change intended.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211215011557.399940-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the common TDP MMU zap helper when handling an MMU notifier unmap
event, the two flows are semantically identical. Consolidate the code in
preparation for a future bug fix, as both kvm_tdp_mmu_unmap_gfn_range()
and __kvm_tdp_mmu_zap_gfn_range() are guilty of not zapping SPTEs in
invalid roots.
No functional change intended.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211215011557.399940-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the guest runs, EFER.LME cannot change unless CR0.PG is clear, and
therefore EFER.NX is the only bit that can affect the MMU role. However,
set_efer accepts a host-initiated change to EFER.LME even with CR0.PG=1.
In that case, the MMU has to be reset.
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
As warned by sparse:
atomisp: drivers/staging/media/atomisp/pci/atomisp_acc.c:508 atomisp_acc_load_extensions() warn: iterator used outside loop: 'acc_fw'
The acc_fw interactor is used outside the loop, at the error handling
logic. On most cases, this is actually safe there, but, if
atomisp_css_set_acc_parameters() has an error, an attempt to use it
will pick an invalid value for acc_fw.
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.
We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we
need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs'
structure to store the information.
Note that ES8326 will need a dedicated codec driver, but the plan is
to use the same machine driver for all Everest Audio devices.
Reported-by: anthony tonitch <d.tonitch@gmail.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220308192610.392950-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
HP changed the DMI identification for 2022 devices:
Product Name: HP Spectre x360 Conv 13-ap0001na
Product Name: 8709
This patch relaxes the DMI_MATCH criterion to work with all versions of this product.
Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Anthony I Gilea <i@cpp.in> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220304204532.54675-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ov5648_state_init() calls ov5648_state_mipi_configure() which uses
__v4l2_ctrl_s_ctrl[_int64](). This means that sensor->mutex (which
is also sensor->ctrls.handler.lock) must be locked before calling
ov5648_state_init().
ov5648_state_mipi_configure() is also used in other places where
the lock is already held so it cannot be changed itself.
Note this is based on an identical (tested) fix for the ov8865 driver,
this has only been compile-tested.
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
test_kernel_ptr() uses access_ok() to figure out if a given address
points to user space instead of kernel space. However on architectures
that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid
for both, and the check always fails because access_ok() returns true.
Make the check for user space pointers conditional on the type of
address space layout.
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Some powers were changed during the jack insert detection and clk's
enable/disable in CCF.
If in parallel, the influence has a chance to detect the wrong jack
type.
We refer to the below commit of the variant codec (rt5682) to fix
this issue.
ASoC: rt5682: Fix deadlock on resume
1. Remove rt5682s_headset_detect in rt5682s_jd_check_handler and
use jack_detect_work instead of.
2. Use dapm mutex used in CCF to protect most of jack_detect_work.
When error occurs in parsing jpeg, the slot isn't acquired yet, it may
be the default value MXC_MAX_SLOTS.
If the driver access the slot using the incorrect slot number, it will
access array out of bounds.
The result is the driver will change num_domains, which follows
slot_data in struct mxc_jpeg_dev.
Then the driver won't detach the pm domain at rmmod, which will lead to
kernel panic when trying to insmod again.
Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
This avoids firmware load error and sysfs fallback reported as follows:
[ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load
for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs
fallback for: imx/sdma/sdma-imx7d.bin
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. Moreover,
the consumer driver of the mentioned clock might gate it and leave
the ECSPI2 (the true owner of that gate) hanging. So lets use the
audio_mclk_post_div, which is the parent.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
HD-audio driver handles the multiple instances and keeps the static
index that is incremented at each probe. This becomes a problem when
user tries to re-bind the device via sysfs multiple times; as the
device index isn't cleared unlike rmmod case, it points to the next
element at re-binding, and eventually later you can't probe any more
when it reaches to SNDRV_CARDS_MAX (usually 32).
This patch is an attempt to improve the handling at rebinding.
Instead of a static device index, now we keep a bitmap and assigns to
the first zero bit position. At the driver remove, in return, the
bitmap slot is cleared again, so that it'll be available for the next
probe.
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):
The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.
At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.
So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.
[1] added on commit d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
The Madera CODECs use regmap_irq functions but nothing ensures that
regmap_irq is built into the kernel. Add dependencies on the ASoC
symbols for the relevant MFD component. There is no point in building
the ASoC driver if the MFD doesn't support it and the MFD part contains
the necessary dependencies to ensure everything is built into the
kernel.
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.
When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.
Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
This patch adds device_link between the consumer and the larbs.
When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.
2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.
Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.
Meanwhile, Currently we don't have a device connect with 2 larbs at the
same time. Disallow this case, print the error log.
The platform device is created at:
of_platform_default_populate_init: arch_initcall_sync
->of_platform_populate
->of_platform_device_create_pdata
When entering our probe, all the devices should be already created.
if it is null, means NODEV. Currently we don't get the fail case.
It's a minor fix, no need add fixes tags.
Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the iommu master device enters of_iommu_xlate, the ops may be
NULL(iommu dev is defered), then it will initialize the fwspec here:
[<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>]
(iommu_fwspec_init+0xbc/0xd4)
[<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>]
(of_iommu_xlate+0x7c/0x12c)
[<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>]
(of_iommu_configure+0x144/0x1e8)
BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit
weird. We always expect create the fwspec internally. otherwise it will
enter here and return fail.
static int mtk_iommu_create_mapping(struct device *dev,
struct of_phandle_args *args)
{
...
if (!fwspec) {
....
} else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) {
>>>>>>>>>>Enter here. return fail.<<<<<<<<<<<<
return -EINVAL;
}
...
}
Thus, Free the existed fwspec if the master device already has fwspec.
This issue is reported at:
https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/
Reported-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the application queues an NV12M jpeg as output buffer, but then
queues a single planar capture buffer, the kernel will crash with
"Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs,
prevent this by finishing the job with error.
Codecs with the same part id, manufacturer id and part id, but different
sdw version should be treated as different codecs. For example, rt711 and
rt711-sdca are different. So, we should match sdw version as well.
Reported-by: Reddy Muralidhar <muralidhar.reddy@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a plug event is detect report the full state of all status
bits, don't assume that there will have been a previous unplug
event to clear all the bits. Report the state of both HEADPHONE
and MICROPHONE bits according to detected type, and clear all the
button status bits. The current button status is already checked
and reported at the end of the function.
During a system suspend the jack could be unplugged and plugged,
possibly changing the jack type. On resume the interrupt status will
indicate a plug event - there will not be an unplug event to clear
the bits.
The ISC supports a full broad range of frame sizes.
Until now, the subdevice was queried for possible frame sizes and these
were reported to the user space.
However, the ISC should not care about which frame sizes the subdev
supports, as long as this frame size is supported.
Thus, report a continuous range from smallest frame size up to the max
resolution.
This fixes several issues found with 'v4l2-compliance -s':
1) read()/write() is supported, but not reported in the capabilities
2) S_STD(G_STD()) failed: setting the same standard should just return 0.
3) G_PARM failed to set readbuffers.
4) different field values in the format vs. what v4l2_buffer reported.
5) zero the sequence number when starting streaming.
6) drop VB_USERPTR: makes no sense with dma_contig streaming.
Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
When session gets reconnected during mount then read size in super block fs context
gets set to zero and after negotiate, rsize is not modified which results in
incorrect read with requested bytes as zero. Fixes intermittent failure
of xfstest generic/240
Note that stable requires a different version of this patch which will be
sent to the stable mailing list.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I hit some weird panics while fixing up the error handling from
btrfs_lookup_bio_sums(). Turns out the compression path will complete
the bio we use if we set up any of the compression bios and then return
an error, and then btrfs_submit_data_bio() will also call bio_endio() on
the bio.
Fix this by making btrfs_submit_compressed_read() responsible for
calling bio_endio() on the bio if there are any errors. Currently it
was only doing it if we created the compression bios, otherwise it was
depending on btrfs_submit_data_bio() to do the right thing. This
creates the above problem, so fix up btrfs_submit_compressed_read() to
always call bio_endio() in case of an error, and then simply return from
btrfs_submit_data_bio() if we had to call
btrfs_submit_compressed_read().
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently any error we get while trying to lookup csums during reads
shows up as a missing csum, and then on the read completion side we
print an error saying there was a csum mismatch and we increase the
device corruption count.
However we could have gotten an EIO from the lookup. We could also be
inside of a memory constrained container and gotten a ENOMEM while
trying to do the read. In either case we don't want to make this look
like a file system corruption problem, we want to make it look like the
actual error it is. Capture any negative value, convert it to the
appropriate blk_status_t, free the csum array if we have one and bail.
Note: a possible improvement would be to make the relocation code look
up the owning inode and see if it's marked as NODATASUM and set
EXTENT_NODATASUM there, that way if there's corruption and there isn't a
checksum when we want it we can fail here rather than later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We can either fail to find a csum entry at all and return -ENOENT, or we
can find a range that is close, but return -EFBIG. In essence these
both mean the same thing when we are doing a lookup for a csum in an
existing range, we didn't find a csum. We want to treat both of these
errors the same way, complain loudly that there wasn't a csum. This
currently happens anyway because we do
count = search_csum_tree();
if (count <= 0) {
// reloc and error handling
}
However it forces us to incorrectly treat EIO or ENOMEM errors as on
disk corruption. Fix this by returning 0 if we get either -ENOENT or
-EFBIG from btrfs_lookup_csum() so we can do proper error handling.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Identifying and removing the stale device from the fs_uuids list is done
by btrfs_free_stale_devices(). btrfs_free_stale_devices() in turn
depends on device_path_matched() to check if the device appears in more
than one btrfs_device structure.
The matching of the device happens by its path, the device path. However,
when device mapper is in use, the dm device paths are nothing but a link
to the actual block device, which leads to the device_path_matched()
failing to match.
Fix this by matching the dev_t as provided by lookup_bdev() instead of
plain string compare of the device paths.
Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.
The actual state is saved in p->saved_state, but reading it after reading
p->__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING
As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
When dumping lock_classes information via /proc/lockdep, we can't take
the lockdep lock as the lock hold time is indeterminate. Iterating
over all_lock_classes without holding lock can be dangerous as there
is a slight chance that it may branch off to other lists leading to
infinite loop or even access invalid memory if changes are made to
all_lock_classes list in parallel.
To avoid this problem, iteration of lock classes is now done directly
on the lock_classes array itself. The lock_classes_in_use bitmap is
checked to see if the lock class is being used. To avoid iterating
the full array all the times, a new max_lock_class_idx value is added
to track the maximum lock_class index that is currently being used.
We can theoretically take the lockdep lock for iterating all_lock_classes
when other lockdep files (lockdep_stats and lock_stat) are accessed as
the lock hold time will be shorter for them. For consistency, they are
also modified to iterate the lock_classes array directly.
Arnd reports that on 32-bit architectures, the fallbacks for
atomic64_read_acquire() and atomic64_set_release() are broken as they
use smp_load_acquire() and smp_store_release() respectively, which do
not work on types larger than the native word size.
Since those contain compiletime_assert_atomic_type(), any attempt to use
those fallbacks will result in a build-time error. e.g. with the
following added to arch/arm/kernel/setup.c:
| In file included from <command-line>:
| In function 'arch_atomic64_set_release',
| inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2:
| ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity.
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^
| ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert'
| 327 | prefix ## suffix(); \
| | ^~~~~~
| ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert'
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^~~~~~~~~~~~~~~~~~~
| ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert'
| 349 | compiletime_assert(__native_word(t), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type'
| 133 | compiletime_assert_atomic_type(*p); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release'
| 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| | ^~~~~~~~~~~~~~~~~~~
| ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release'
| 1270 | smp_store_release(&(v)->counter, i);
| | ^~~~~~~~~~~~~~~~~
| make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1
| make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2
| make: *** [Makefile:1831: arch/arm] Error 2
Fix this by only using smp_load_acquire() and smp_store_release() for
native atomic types, and otherwise falling back to the regular barriers
necessary for acquire/release semantics, as we do in the more generic
acquire and release fallbacks.
Since the fallback templates are used to generate the atomic64_*() and
atomic_*() operations, the __native_word() check is added to both. For
the atomic_*() operations, which are always 32-bit, the __native_word()
check is redundant but not harmful, as it is always true.
For the example above this works as expected on 32-bit, e.g. for arm
multi_v7_defconfig:
The data transfer routines must poll the status register to
determine when more data can be shifted in or out. If the hardware
gets into a bad state, these polling loops may never exit. Prevent
this by returning an error if a timeout is exceeded.
Put NVMe/TCP sockets in their own class to avoid some lockdep warnings.
Sockets created by nvme-tcp are not exposed to user-space, and will not
trigger certain code paths that the general socket API exposes.
Lockdep complains about a circular dependency between the socket and
filesystem locks, because setsockopt can trigger a page fault with a
socket lock held, but nvme-tcp sends requests on the socket while file
system locks are held.
======================================================
WARNING: possible circular locking dependency detected
5.15.0-rc3 #1 Not tainted
------------------------------------------------------
fio/1496 is trying to acquire lock:
(sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80
but task is already holding lock:
(&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a page is not present, we get non-access data TLB faults from
the fdc and fic instructions in flush_user_dcache_range_asm and
flush_user_icache_range_asm. When these occur, the cache line is
not invalidated and potentially we get memory corruption. The
problem was hidden by the nullification of the flush instructions.
These faults also affect performance. With pa8800/pa8900 processors,
there will be 32 faults per 4 KB page since the cache line is 128
bytes. There will be more faults with earlier processors.
The problem is fixed by using flush_cache_pages(). It does the flush
using a tmp alias mapping.
The flush_cache_pages() call in flush_cache_range() flushed too
large a range.
V2: Remove unnecessary preempt_disable() and preempt_enable() calls.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.
However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.
Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:
watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]
Observed on Ampere Altra systems with a single BERT record of ~250KB.
The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in
/sys/firmware/acpi/tables/data/BERT
limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).
Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.
Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the
errors below:
$ cd lib/raid6/test/
$ make
<stdin>:1:1: error: stray ‘\’ in program
<stdin>:1:2: error: stray ‘#’ in program
<stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
before ‘<’ token
[...]
The errors come from the HAS_ALTIVEC test, which fails, and the POWER
optimized versions are not built. That’s also reason nobody noticed on the
other architectures.
GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release
announcment:
> * WARNING: Backward-incompatibility!
> Number signs (#) appearing inside a macro reference or function invocation
> no longer introduce comments and should not be escaped with backslashes:
> thus a call such as:
> foo := $(shell echo '#')
> is legal. Previously the number sign needed to be escaped, for example:
> foo := $(shell echo '\#')
> Now this latter will resolve to "\#". If you want to write makefiles
> portable to both versions, assign the number sign to a variable:
> H := \#
> foo := $(shell echo '$H')
> This was claimed to be fixed in 3.81, but wasn't, for some reason.
> To detect this change search for 'nocomment' in the .FEATURES variable.
So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd
files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead
of \# in Makefiles") and define and use a $(pound) variable.
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Cc: Matt Brown <matthew.brown.dev@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.
For instance, this can happen if the kernel is run with "acpi=off"
in the command line.
KASAN reports a use-after-free report when doing normal scsi-mq test
[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541] dump_stack+0x9b/0xce
[69832.251232] ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243] print_address_description.constprop.6+0x3e/0x60
[69832.253381] ? __cpuidle_text_end+0x5/0x5
[69832.254211] ? vprintk_func+0x6b/0x120
[69832.254994] ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952] ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914] kasan_report.cold.9+0x22/0x3a
[69832.257753] ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755] check_memory_region+0x1c1/0x1e0
[69832.260248] bfq_dispatch_request+0x1045/0x44b0
[69832.261181] ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147] ? __switch_to+0x5f4/0xee0
[69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946] __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840] blk_mq_run_work_fn+0x51/0x60
[69832.278170] process_one_work+0x6d4/0xfe0
[69832.278984] worker_thread+0x91/0xc80
[69832.279726] ? __kthread_parkme+0xb0/0x110
[69832.280554] ? process_one_work+0xfe0/0xfe0
[69832.281414] kthread+0x32d/0x3f0
[69832.282082] ? kthread_park+0x170/0x170
[69832.282849] ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599] kasan_save_stack+0x19/0x40
[69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350] kmem_cache_alloc_node+0x13f/0x460
[69832.287237] bfq_get_queue+0x3d4/0x1140
[69832.287993] bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015] bfq_init_rq+0x337/0x2d50
[69832.289749] bfq_insert_requests+0x304/0x4e10
[69832.290634] blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629] blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538] blk_flush_plug_list+0x2c5/0x480
[69832.293392] io_schedule_prepare+0xb2/0xd0
[69832.294209] io_schedule_timeout+0x13/0x80
[69832.295014] wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137] submit_bio_wait+0x103/0x1a0
[69832.296932] blkdev_issue_discard+0xe6/0x160
[69832.297794] blk_ioctl_discard+0x219/0x290
[69832.298614] blkdev_common_ioctl+0x50a/0x1750
[69832.304715] blkdev_ioctl+0x470/0x600
[69832.305474] block_ioctl+0xde/0x120
[69832.306232] vfs_ioctl+0x6c/0xc0
[69832.306877] __se_sys_ioctl+0x90/0xa0
[69832.307629] do_syscall_64+0x2d/0x40
[69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328] kasan_save_stack+0x19/0x40
[69832.311121] kasan_set_track+0x1c/0x30
[69832.311868] kasan_set_free_info+0x1b/0x30
[69832.312699] __kasan_slab_free+0x111/0x160
[69832.313524] kmem_cache_free+0x94/0x460
[69832.314367] bfq_put_queue+0x582/0x940
[69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275] bfq_bfqq_expire+0xb27/0x2440
[69832.318084] bfq_dispatch_request+0x697/0x44b0
[69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225] __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114] blk_mq_run_work_fn+0x51/0x60
[69832.323942] process_one_work+0x6d4/0xfe0
[69832.324772] worker_thread+0x91/0xc80
[69832.325518] kthread+0x32d/0x3f0
[69832.326205] ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297] which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200ffffea0000dbac08ffff888017a57650ffff8880179fe840
[69832.354972] raw: ffff88802622a528000000000012000800000001ffffffff0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273] ^
[69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================
In bfq_dispatch_requestfunction, it may have function call:
bfq_dispatch_request
__bfq_dispatch_request
bfq_select_queue
bfq_bfqq_expire
__bfq_bfqd_reset_in_service
bfq_put_queue
kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;
Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.
: The AT_PHDR of ELF auxiliary vectors should point to the memory address
: of program header. But binfmt_elf.c calculates this address as follows:
:
: NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
:
: which is wrong since e_phoff is the file offset of program header and
: load_addr is the memory base address from PT_LOAD entry.
:
: The ld.so uses AT_PHDR as the memory address of program header. In normal
: case, since the e_phoff is usually 64 and in the first PT_LOAD region, it
: is the correct program header address.
:
: But if the address of program header isn't equal to the first PT_LOAD
: address + e_phoff (e.g. Put the program header in other non-consecutive
: PT_LOAD region), ld.so will try to read program header from wrong address
: then crash or use incorrect program header.
This is because exec->e_phoff
is the offset of PHDRs in the file and the address of PHDRs in the
memory may differ from it. This patch fixes the bug by calculating the
address of program headers from PT_LOADs directly.
pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able,
and has a raw spinlock for mutual exclusion, which is uses with
interruptible primitives.
This means that this critical section can itself be interrupted.
Should the interrupt also be a PDC interrupt, and the endpoint driver
perform an irq_disable() on that interrupt, we end-up in a deadlock.
Fix this by using the irqsave/irqrestore variants of the locking
primitives.
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.
These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.
As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.
Based-on-patch-by: Demi Marie Obenour <demiobenour@gmail.com> Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
[PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
The release function does not reset the per cpu variable when it is
called. That will prevent creation again as the variable will be
already from the previous creation.
projects / thirdparty / kernel / stable.git / log
